* [PATCH] HID: hid-input: occasionally report stylus battery even if not changed @ 2020-09-30 22:47 dmitry.torokhov 2020-10-07 22:05 ` Kenneth Albanowski 0 siblings, 1 reply; 4+ messages in thread From: dmitry.torokhov @ 2020-09-30 22:47 UTC (permalink / raw) To: Jiri Kosina, Sebastian Reichel Cc: Benjamin Tissoires, Johan Korsnes, linux-input, Kenneth Albanowski There are styluses that only report their battery status when they are touching the touchscreen; additionally we currently suppress battery reports if capacity has not changed. To help userspace recognize how long ago the device reported battery status, let's send the change event through if either capacity has changed, or at least 30 seconds have passed since last report we've let through. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- This is a bit of RFC. Another option would be to mark the power supply as either offline or not present when stylus leaves the surface instead of saying it is online... Sebastian, any ideas/suggestions? drivers/hid/hid-input.c | 5 ++++- include/linux/hid.h | 1 + 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 5da631d2ec9b..92b4c9bb6619 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -534,9 +534,12 @@ static void hidinput_update_battery(struct hid_device *dev, int value) capacity = hidinput_scale_battery_capacity(dev, value); if (dev->battery_status != HID_BATTERY_REPORTED || - capacity != dev->battery_capacity) { + capacity != dev->battery_capacity || + ktime_after(ktime_get_coarse(), dev->battery_ratelimit_time)) { dev->battery_capacity = capacity; dev->battery_status = HID_BATTERY_REPORTED; + dev->battery_ratelimit_time = + ktime_add_ms(ktime_get_coarse(), 30 * 1000); power_supply_changed(dev->battery); } } diff --git a/include/linux/hid.h b/include/linux/hid.h index 875f71132b14..c76a18f88262 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -583,6 +583,7 @@ struct hid_device { /* device report descriptor */ __s32 battery_report_id; enum hid_battery_status battery_status; bool battery_avoid_query; + ktime_t battery_ratelimit_time; #endif unsigned long status; /* see STAT flags above */ -- 2.28.0.709.gb0816b6eb0-goog -- Dmitry ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] HID: hid-input: occasionally report stylus battery even if not changed 2020-09-30 22:47 [PATCH] HID: hid-input: occasionally report stylus battery even if not changed dmitry.torokhov @ 2020-10-07 22:05 ` Kenneth Albanowski 2020-10-27 17:38 ` Dmitry Torokhov 0 siblings, 1 reply; 4+ messages in thread From: Kenneth Albanowski @ 2020-10-07 22:05 UTC (permalink / raw) To: Dmitry Torokhov Cc: Jiri Kosina, Sebastian Reichel, Benjamin Tissoires, Johan Korsnes, linux-input I've tested this locally backported to a 4.19 variant; it does work, and provides the expected additional CHANGE events while safely limiting the rate. This seems like a reasonable minimum improvement, just ensuring information already being pushed by HID reports can be utilized. I'm unsure about mapping Digitizers.InRange to power_supply 'present', in the abstract. It seems there could be a device where Digitizers.BatteryStrength is sent, despite Digitizers.InRange=0, and the HID Usage Tables don't quite seem to rule this out (depending on how battery status collection interacts with 'the region where digitizing is possible', section 16.3.1.). As-is, this is useful and sufficient to get more timely reports up to userspace. - Kenneth Albanowski On Wed, Sep 30, 2020 at 3:47 PM <dmitry.torokhov@gmail.com> wrote: > > There are styluses that only report their battery status when they are > touching the touchscreen; additionally we currently suppress battery > reports if capacity has not changed. To help userspace recognize how long > ago the device reported battery status, let's send the change event through > if either capacity has changed, or at least 30 seconds have passed since > last report we've let through. > > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > --- > > This is a bit of RFC. Another option would be to mark the power supply > as either offline or not present when stylus leaves the surface instead > of saying it is online... Sebastian, any ideas/suggestions? > > drivers/hid/hid-input.c | 5 ++++- > include/linux/hid.h | 1 + > 2 files changed, 5 insertions(+), 1 deletion(-) > > diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c > index 5da631d2ec9b..92b4c9bb6619 100644 > --- a/drivers/hid/hid-input.c > +++ b/drivers/hid/hid-input.c > @@ -534,9 +534,12 @@ static void hidinput_update_battery(struct hid_device *dev, int value) > capacity = hidinput_scale_battery_capacity(dev, value); > > if (dev->battery_status != HID_BATTERY_REPORTED || > - capacity != dev->battery_capacity) { > + capacity != dev->battery_capacity || > + ktime_after(ktime_get_coarse(), dev->battery_ratelimit_time)) { > dev->battery_capacity = capacity; > dev->battery_status = HID_BATTERY_REPORTED; > + dev->battery_ratelimit_time = > + ktime_add_ms(ktime_get_coarse(), 30 * 1000); > power_supply_changed(dev->battery); > } > } > diff --git a/include/linux/hid.h b/include/linux/hid.h > index 875f71132b14..c76a18f88262 100644 > --- a/include/linux/hid.h > +++ b/include/linux/hid.h > @@ -583,6 +583,7 @@ struct hid_device { /* device report descriptor */ > __s32 battery_report_id; > enum hid_battery_status battery_status; > bool battery_avoid_query; > + ktime_t battery_ratelimit_time; > #endif > > unsigned long status; /* see STAT flags above */ > -- > 2.28.0.709.gb0816b6eb0-goog > > > -- > Dmitry ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] HID: hid-input: occasionally report stylus battery even if not changed 2020-10-07 22:05 ` Kenneth Albanowski @ 2020-10-27 17:38 ` Dmitry Torokhov 2020-10-29 15:15 ` Jiri Kosina 0 siblings, 1 reply; 4+ messages in thread From: Dmitry Torokhov @ 2020-10-27 17:38 UTC (permalink / raw) To: Jiri Kosina Cc: Kenneth Albanowski, Sebastian Reichel, Benjamin Tissoires, Johan Korsnes, linux-input M On Wed, Oct 07, 2020 at 03:05:13PM -0700, Kenneth Albanowski wrote: > I've tested this locally backported to a 4.19 variant; it does work, > and provides the expected additional CHANGE events while safely > limiting the rate. > > This seems like a reasonable minimum improvement, just ensuring > information already being pushed by HID reports can be utilized. > > I'm unsure about mapping Digitizers.InRange to power_supply 'present', > in the abstract. It seems there could be a device where > Digitizers.BatteryStrength is sent, despite Digitizers.InRange=0, and > the HID Usage Tables don't quite seem to rule this out (depending on > how battery status collection interacts with 'the region where > digitizing is possible', section 16.3.1.). > > As-is, this is useful and sufficient to get more timely reports up to userspace. Jiri, if there are no better ideas, maybe this one can be applied? Thanks! > > - Kenneth Albanowski > > > On Wed, Sep 30, 2020 at 3:47 PM <dmitry.torokhov@gmail.com> wrote: > > > > There are styluses that only report their battery status when they are > > touching the touchscreen; additionally we currently suppress battery > > reports if capacity has not changed. To help userspace recognize how long > > ago the device reported battery status, let's send the change event through > > if either capacity has changed, or at least 30 seconds have passed since > > last report we've let through. > > > > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > > --- > > > > This is a bit of RFC. Another option would be to mark the power supply > > as either offline or not present when stylus leaves the surface instead > > of saying it is online... Sebastian, any ideas/suggestions? > > > > drivers/hid/hid-input.c | 5 ++++- > > include/linux/hid.h | 1 + > > 2 files changed, 5 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c > > index 5da631d2ec9b..92b4c9bb6619 100644 > > --- a/drivers/hid/hid-input.c > > +++ b/drivers/hid/hid-input.c > > @@ -534,9 +534,12 @@ static void hidinput_update_battery(struct hid_device *dev, int value) > > capacity = hidinput_scale_battery_capacity(dev, value); > > > > if (dev->battery_status != HID_BATTERY_REPORTED || > > - capacity != dev->battery_capacity) { > > + capacity != dev->battery_capacity || > > + ktime_after(ktime_get_coarse(), dev->battery_ratelimit_time)) { > > dev->battery_capacity = capacity; > > dev->battery_status = HID_BATTERY_REPORTED; > > + dev->battery_ratelimit_time = > > + ktime_add_ms(ktime_get_coarse(), 30 * 1000); > > power_supply_changed(dev->battery); > > } > > } > > diff --git a/include/linux/hid.h b/include/linux/hid.h > > index 875f71132b14..c76a18f88262 100644 > > --- a/include/linux/hid.h > > +++ b/include/linux/hid.h > > @@ -583,6 +583,7 @@ struct hid_device { /* device report descriptor */ > > __s32 battery_report_id; > > enum hid_battery_status battery_status; > > bool battery_avoid_query; > > + ktime_t battery_ratelimit_time; > > #endif > > > > unsigned long status; /* see STAT flags above */ > > -- > > 2.28.0.709.gb0816b6eb0-goog > > > > > > -- > > Dmitry -- Dmitry ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] HID: hid-input: occasionally report stylus battery even if not changed 2020-10-27 17:38 ` Dmitry Torokhov @ 2020-10-29 15:15 ` Jiri Kosina 0 siblings, 0 replies; 4+ messages in thread From: Jiri Kosina @ 2020-10-29 15:15 UTC (permalink / raw) To: Dmitry Torokhov Cc: Kenneth Albanowski, Sebastian Reichel, Benjamin Tissoires, Johan Korsnes, linux-input On Tue, 27 Oct 2020, Dmitry Torokhov wrote: > M > On Wed, Oct 07, 2020 at 03:05:13PM -0700, Kenneth Albanowski wrote: > > I've tested this locally backported to a 4.19 variant; it does work, > > and provides the expected additional CHANGE events while safely > > limiting the rate. > > > > This seems like a reasonable minimum improvement, just ensuring > > information already being pushed by HID reports can be utilized. > > > > I'm unsure about mapping Digitizers.InRange to power_supply 'present', > > in the abstract. It seems there could be a device where > > Digitizers.BatteryStrength is sent, despite Digitizers.InRange=0, and > > the HID Usage Tables don't quite seem to rule this out (depending on > > how battery status collection interacts with 'the region where > > digitizing is possible', section 16.3.1.). > > > > As-is, this is useful and sufficient to get more timely reports up to userspace. > > Jiri, if there are no better ideas, maybe this one can be applied? Agreed (I certainly don't have better one :) ). Applied, thanks. -- Jiri Kosina SUSE Labs ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-10-29 15:15 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-09-30 22:47 [PATCH] HID: hid-input: occasionally report stylus battery even if not changed dmitry.torokhov 2020-10-07 22:05 ` Kenneth Albanowski 2020-10-27 17:38 ` Dmitry Torokhov 2020-10-29 15:15 ` Jiri Kosina
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).