Linux Input Archive on lore.kernel.org
 help / color / Atom feed
From: HyungJae Im <hj2.im@samsung.com>
To: HyungJae Im <hj2.im@samsung.com>,
	"manivannan.sadhasivam@linaro.org"
	<manivannan.sadhasivam@linaro.org>,
	"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-input@vger.kernel.org" <linux-input@vger.kernel.org>,
	"rydberg@bitmath.org" <rydberg@bitmath.org>
Cc: Jungrae Kim <jryu.kim@samsung.com>
Subject: [PATCH v2] input: add 2 kind of switch
Date: Thu, 29 Oct 2020 22:27:47 +0900
Message-ID: <20201029132747epcms1p8fae559dff47bf0eebdcc9f94efd9a1bf@epcms1p8> (raw)
In-Reply-To: <CGME20201029132747epcms1p8fae559dff47bf0eebdcc9f94efd9a1bf@epcms1p8>

From: "hj2.im" <hj2.im@samsung.com>
Date: Thu, 29 Oct 2020 22:11:24 +0900
Subject: [PATCH v2] input: add 2 kind of switch

We need support to various accessories on the device,
some switch does not exist in switch list.
So added switch for the following purpose.

SW_COVER_ATTACHED is for the checking the cover
attached or not on the device. SW_EXT_PEN_ATTACHED is for the
checking the external pen attached or not on the device

Signed-off-by: Hyungjae Im <hj2.im@samsung.com>
---
 drivers/input/Kconfig                  |  20 ++
 drivers/input/Makefile                 |   3 +
 drivers/input/cover_detect.c           | 242 ++++++++++++++++++++++++
 drivers/input/ext_pen_detect.c         | 243 +++++++++++++++++++++++++
 include/linux/mod_devicetable.h        |   2 +-
 include/uapi/linux/input-event-codes.h |   4 +-
 6 files changed, 512 insertions(+), 2 deletions(-)
 create mode 100644 drivers/input/cover_detect.c
 create mode 100644 drivers/input/ext_pen_detect.c

diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 1efd3154b68d..df902f4a549e 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -185,6 +185,26 @@ config INPUT_APMPOWER
 	  To compile this driver as a module, choose M here: the
 	  module will be called apm-power.
 
+config COVER_DETECT
+	tristate "Enable cover attach detection"
+	default n
+	help
+	  Say Y here to enable cover attach detection
+	  and send a event when cover is attached/detached.
+	  Active gpio state is low and active event value is 0.
+
+	  If unsure, say N.
+
+config EXT_PEN_DETECT
+	tristate "Enable external pen attach detection"
+	default n
+	help
+	  Say Y here to enable external pen attach detection
+	  and send a event when external pen is attached/detached.
+	  Active gpio state is low and active event value is 0.
+
+	  If unsure, say N.
+
 comment "Input Device Drivers"
 
 source "drivers/input/keyboard/Kconfig"
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index e35650930371..31ee1f2d2e21 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -29,3 +29,6 @@ obj-$(CONFIG_INPUT_MISC)	+= misc/
 obj-$(CONFIG_INPUT_APMPOWER)	+= apm-power.o
 
 obj-$(CONFIG_RMI4_CORE)		+= rmi4/
+
+obj-$(CONFIG_COVER_DETECT)	+= cover_detect.o
+obj-$(CONFIG_EXT_PEN_DETECT)	+= ext_pen_detect.o
diff --git a/drivers/input/cover_detect.c b/drivers/input/cover_detect.c
new file mode 100644
index 000000000000..4d3d68c616ec
--- /dev/null
+++ b/drivers/input/cover_detect.c
@@ -0,0 +1,242 @@
+/*
+ * Copyright (C) 2015 Samsung Electronics Co. Ltd. All Rights Reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/wakelock.h>
+
+struct cover_detect_drvdata {
+	struct input_dev *input;
+	struct delayed_work cover_detect_dwork;
+	struct wakeup_source *ws;
+	int gpio_cover_detect;
+	int irq_cover_detect;
+};
+
+static void cover_detect_work(struct work_struct *work)
+{
+	struct cover_detect_drvdata *ddata =
+		container_of(work, struct cover_detect_drvdata,
+				cover_detect_dwork.work);
+	bool cover_status;
+
+	cover_status = gpio_get_value(ddata->gpio_cover_detect);
+
+	input_report_switch(ddata->input,
+			SW_COVER_ATTACHED, cover_status);
+	input_sync(ddata->input);
+}
+
+static void __cover_detect(struct cover_detect_drvdata *ddata,
+				 bool cover_status)
+{
+	cancel_delayed_work_sync(&ddata->cover_detect_dwork);
+	if (cover_status) {
+		__pm_wakeup_event(ddata->ws, jiffies_to_msecs(HZ / 20));
+		schedule_delayed_work(&ddata->cover_detect_dwork, HZ * 1 / 100);
+	} else {
+		__pm_relax(ddata->ws);
+		schedule_delayed_work(&ddata->cover_detect_dwork, 0);
+	}
+}
+
+static irqreturn_t cover_detect_irq(int irq, void *dev_id)
+{
+	bool cover_status;
+	struct cover_detect_drvdata *ddata = dev_id;
+
+	cover_status = gpio_get_value(ddata->gpio_cover_detect);
+
+	__cover_detect(ddata, cover_status);
+
+	return IRQ_HANDLED;
+}
+
+static int cover_detect_open(struct input_dev *input)
+{
+	struct cover_detect_drvdata *ddata = input_get_drvdata(input);
+	/* update the current status */
+	schedule_delayed_work(&ddata->cover_detect_dwork, HZ / 2);
+	/* Report current state of buttons that are connected to GPIOs */
+	input_sync(input);
+
+	return 0;
+}
+
+static void cover_detect_close(struct input_dev *input)
+{
+}
+
+static void init_cover_detect_irq(struct input_dev *input)
+{
+	struct cover_detect_drvdata *ddata = input_get_drvdata(input);
+
+	int ret = 0;
+	int irq = ddata->irq_cover_detect;
+
+	ret =	request_threaded_irq(
+		irq, NULL,
+		cover_detect_irq,
+		IRQF_TRIGGER_RISING |
+		IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+		"cover_detect", ddata);
+	if (ret < 0)
+		pr_err("keys: failed to request cover detect irq %d gpio %d\n",
+			irq, ddata->gpio_cover_detect);
+}
+
+#ifdef CONFIG_OF
+static int of_cover_detect_data_parsing_dt(struct device *dev,
+					struct cover_detect_drvdata *ddata)
+{
+	struct device_node *np = dev->of_node;
+	int gpio;
+	enum of_gpio_flags flags;
+
+	gpio = of_get_named_gpio_flags(np, "gpio_cover_detect", 0, &flags);
+	ddata->gpio_cover_detect = gpio;
+
+	ddata->irq_cover_detect = gpio_to_irq(gpio);
+
+	return 0;
+}
+#endif
+
+static int cover_detect_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cover_detect_drvdata *ddata;
+	struct input_dev *input;
+	int error;
+	int wakeup = 0;
+
+	ddata = kzalloc(sizeof(struct cover_detect_drvdata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+#ifdef CONFIG_OF
+	if (dev->of_node) {
+		error = of_cover_detect_data_parsing_dt(dev, ddata);
+		if (error < 0) {
+			dev_err(dev, "fail to get the devicetree, error: %d\n",
+					error);
+			goto fail1;
+		}
+	}
+#endif
+
+	input = input_allocate_device();
+	if (!input) {
+		dev_err(dev, "failed to allocate state\n");
+		error = -ENOMEM;
+		goto fail1;
+	}
+
+	ddata->input = input;
+
+	ddata->ws = wakeup_source_register(NULL, "cover_detect");
+
+	platform_set_drvdata(pdev, ddata);
+	input_set_drvdata(input, ddata);
+
+	input->name = "cover_detect";
+	input->phys = "cover_detect";
+	input->dev.parent = &pdev->dev;
+
+	input->evbit[0] |= BIT_MASK(EV_SW);
+	input_set_capability(input, EV_SW, SW_COVER_ATTACHED);
+
+	input->open = cover_detect_open;
+	input->close = cover_detect_close;
+
+	/* Enable auto repeat feature of Linux input subsystem */
+	__set_bit(EV_REP, input->evbit);
+
+	INIT_DELAYED_WORK(&ddata->cover_detect_dwork, cover_detect_work);
+
+	init_cover_detect_irq(input);
+
+	if (ddata->gpio_cover_detect != 0) {
+		error = input_register_device(input);
+		if (error) {
+			dev_err(dev, "Unable to register input device, error: %d\n",
+				error);
+			goto fail1;
+		}
+	}
+
+	device_init_wakeup(&pdev->dev, wakeup);
+
+	return 0;
+
+ fail1:
+	kfree(ddata);
+
+	return error;
+}
+
+static int cover_detect_remove(struct platform_device *pdev)
+{
+	struct cover_detect_drvdata *ddata = platform_get_drvdata(pdev);
+	struct input_dev *input = ddata->input;
+
+	device_init_wakeup(&pdev->dev, 0);
+
+	input_unregister_device(input);
+
+	wakeup_source_unregister(ddata->ws);
+
+	kfree(ddata);
+
+	return 0;
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id cover_detect_dt_ids[] = {
+	{ .compatible = "cover_detect" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, cover_detect_dt_ids);
+#endif /* CONFIG_OF */
+
+static struct platform_driver cover_detect_device_driver = {
+	.probe		= cover_detect_probe,
+	.remove		= cover_detect_remove,
+	.driver		= {
+		.name	= "cover_detect",
+		.owner	= THIS_MODULE,
+#if defined(CONFIG_OF)
+		.of_match_table	= cover_detect_dt_ids,
+#endif /* CONFIG_OF */
+	}
+};
+
+static int __init cover_detect_init(void)
+{
+	return platform_driver_register(&cover_detect_device_driver);
+}
+
+static void __exit cover_detect_exit(void)
+{
+	platform_driver_unregister(&cover_detect_device_driver);
+}
+
+module_init(cover_detect_init);
+module_exit(cover_detect_exit);
diff --git a/drivers/input/ext_pen_detect.c b/drivers/input/ext_pen_detect.c
new file mode 100644
index 000000000000..3595b967718b
--- /dev/null
+++ b/drivers/input/ext_pen_detect.c
@@ -0,0 +1,243 @@
+/*
+ * Copyright (C) 2015 Samsung Electronics Co. Ltd. All Rights Reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/wakelock.h>
+
+struct ext_pen_detect_drvdata {
+	struct input_dev *input;
+	struct delayed_work ext_pen_detect_dwork;
+	struct wakeup_source *ws;
+	int gpio_ext_pen_detect;
+	int irq_ext_pen_detect;
+};
+
+static void ext_pen_detect_work(struct work_struct *work)
+{
+	struct ext_pen_detect_drvdata *ddata =
+		container_of(work, struct ext_pen_detect_drvdata,
+				ext_pen_detect_dwork.work);
+	bool ext_pen_status;
+
+	ext_pen_status = gpio_get_value(ddata->gpio_ext_pen_detect);
+
+	input_report_switch(ddata->input,
+			SW_EXT_PEN_ATTACHED, ext_pen_status);
+	input_sync(ddata->input);
+}
+
+static void __ext_pen_detect(struct ext_pen_detect_drvdata *ddata,
+				bool ext_pen_status)
+{
+	cancel_delayed_work_sync(&ddata->ext_pen_detect_dwork);
+	if (ext_pen_status) {
+		__pm_wakeup_event(ddata->ws, jiffies_to_msecs(HZ / 20));
+		schedule_delayed_work(&ddata->ext_pen_detect_dwork,
+					HZ * 1 / 100);
+	} else {
+		__pm_relax(ddata->ws);
+		schedule_delayed_work(&ddata->ext_pen_detect_dwork, 0);
+	}
+}
+
+static irqreturn_t ext_pen_detect_irq(int irq, void *dev_id)
+{
+	bool ext_pen_status;
+	struct ext_pen_detect_drvdata *ddata = dev_id;
+
+	ext_pen_status = gpio_get_value(ddata->gpio_ext_pen_detect);
+
+	__ext_pen_detect(ddata, ext_pen_status);
+
+	return IRQ_HANDLED;
+}
+
+static int ext_pen_detect_open(struct input_dev *input)
+{
+	struct ext_pen_detect_drvdata *ddata = input_get_drvdata(input);
+	/* update the current status */
+	schedule_delayed_work(&ddata->ext_pen_detect_dwork, HZ / 2);
+	/* Report current state of buttons that are connected to GPIOs */
+	input_sync(input);
+
+	return 0;
+}
+
+static void ext_pen_detect_close(struct input_dev *input)
+{
+}
+
+static void init_ext_pen_detect_irq(struct input_dev *input)
+{
+	struct ext_pen_detect_drvdata *ddata = input_get_drvdata(input);
+
+	int ret = 0;
+	int irq = ddata->irq_ext_pen_detect;
+
+	ret =	request_threaded_irq(
+		irq, NULL,
+		ext_pen_detect_irq,
+		IRQF_TRIGGER_RISING |
+		IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+		"ext_pen_detect", ddata);
+	if (ret < 0)
+		pr_err("keys: failed to request ext_pen detect irq %d gpio %d\n",
+				irq, ddata->gpio_ext_pen_detect);
+}
+
+#ifdef CONFIG_OF
+static int of_ext_pen_detect_data_parsing_dt(struct device *dev,
+					struct ext_pen_detect_drvdata *ddata)
+{
+	struct device_node *np = dev->of_node;
+	int gpio;
+	enum of_gpio_flags flags;
+
+	gpio = of_get_named_gpio_flags(np, "gpio_ext_pen_detect", 0, &flags);
+	ddata->gpio_ext_pen_detect = gpio;
+
+	ddata->irq_ext_pen_detect = gpio_to_irq(gpio);
+
+	return 0;
+}
+#endif
+
+static int ext_pen_detect_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ext_pen_detect_drvdata *ddata;
+	struct input_dev *input;
+	int error;
+	int wakeup = 0;
+
+	ddata = kzalloc(sizeof(struct ext_pen_detect_drvdata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+#ifdef CONFIG_OF
+	if (dev->of_node) {
+		error = of_ext_pen_detect_data_parsing_dt(dev, ddata);
+		if (error < 0) {
+			dev_err(dev, "fail to get the devicetree, error: %d\n",
+					error);
+			goto fail1;
+		}
+	}
+#endif
+
+	input = input_allocate_device();
+	if (!input) {
+		dev_err(dev, "failed to allocate state\n");
+		error = -ENOMEM;
+		goto fail1;
+	}
+
+	ddata->input = input;
+
+	ddata->ws = wakeup_source_register(NULL, "ext_pen_detect");
+
+	platform_set_drvdata(pdev, ddata);
+	input_set_drvdata(input, ddata);
+
+	input->name = "ext_pen_detect";
+	input->phys = "ext_pen_detect";
+	input->dev.parent = &pdev->dev;
+
+	input->evbit[0] |= BIT_MASK(EV_SW);
+	input_set_capability(input, EV_SW, SW_EXT_PEN_ATTACHED);
+
+	input->open = ext_pen_detect_open;
+	input->close = ext_pen_detect_close;
+
+	/* Enable auto repeat feature of Linux input subsystem */
+	__set_bit(EV_REP, input->evbit);
+
+	INIT_DELAYED_WORK(&ddata->ext_pen_detect_dwork, ext_pen_detect_work);
+
+	init_ext_pen_detect_irq(input);
+
+	if (ddata->gpio_ext_pen_detect != 0) {
+		error = input_register_device(input);
+		if (error) {
+			dev_err(dev, "Unable to register input device, error: %d\n",
+				error);
+			goto fail1;
+		}
+	}
+
+	device_init_wakeup(&pdev->dev, wakeup);
+
+	return 0;
+
+ fail1:
+	kfree(ddata);
+
+	return error;
+}
+
+static int ext_pen_detect_remove(struct platform_device *pdev)
+{
+	struct ext_pen_detect_drvdata *ddata = platform_get_drvdata(pdev);
+	struct input_dev *input = ddata->input;
+
+	device_init_wakeup(&pdev->dev, 0);
+
+	input_unregister_device(input);
+
+	wakeup_source_unregister(ddata->ws);
+
+	kfree(ddata);
+
+	return 0;
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id ext_pen_detect_dt_ids[] = {
+	{ .compatible = "ext_pen_detect" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ext_pen_detect_dt_ids);
+#endif /* CONFIG_OF */
+
+static struct platform_driver ext_pen_detect_device_driver = {
+	.probe		= ext_pen_detect_probe,
+	.remove		= ext_pen_detect_remove,
+	.driver		= {
+		.name	= "ext_pen_detect",
+		.owner	= THIS_MODULE,
+#if defined(CONFIG_OF)
+		.of_match_table	= ext_pen_detect_dt_ids,
+#endif /* CONFIG_OF */
+	}
+};
+
+static int __init ext_pen_detect_init(void)
+{
+	return platform_driver_register(&ext_pen_detect_device_driver);
+}
+
+static void __exit ext_pen_detect_exit(void)
+{
+	platform_driver_unregister(&ext_pen_detect_device_driver);
+}
+
+module_init(ext_pen_detect_init);
+module_exit(ext_pen_detect_exit);
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 5b08a473cdba..897f5a3e7721 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -320,7 +320,7 @@ struct pcmcia_device_id {
 #define INPUT_DEVICE_ID_LED_MAX		0x0f
 #define INPUT_DEVICE_ID_SND_MAX		0x07
 #define INPUT_DEVICE_ID_FF_MAX		0x7f
-#define INPUT_DEVICE_ID_SW_MAX		0x10
+#define INPUT_DEVICE_ID_SW_MAX		0x12
 #define INPUT_DEVICE_ID_PROP_MAX	0x1f
 
 #define INPUT_DEVICE_ID_MATCH_BUS	1
diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
index 0c2e27d28e0a..8ca2acee1f92 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -889,7 +889,9 @@
 #define SW_MUTE_DEVICE		0x0e  /* set = device disabled */
 #define SW_PEN_INSERTED		0x0f  /* set = pen inserted */
 #define SW_MACHINE_COVER	0x10  /* set = cover closed */
-#define SW_MAX			0x10
+#define SW_COVER_ATTACHED	0x11  /* set = cover attached */
+#define SW_EXT_PEN_ATTACHED	0x12  /* set = external pen attached */
+#define SW_MAX			0x12
 #define SW_CNT			(SW_MAX+1)
 
 /*
-- 
2.17.1

       reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20201029132747epcms1p8fae559dff47bf0eebdcc9f94efd9a1bf@epcms1p8>
2020-10-29 13:27 ` HyungJae Im [this message]
2020-10-29 13:41   ` Barnabás Pőcze
2020-10-29 13:54     ` gregkh
2020-10-29 14:36       ` Barnabás Pőcze
2020-10-29 13:57   ` gregkh
2020-10-29 17:45     ` Dmitry Torokhov
     [not found]   ` <CGME20201029132747epcms1p8fae559dff47bf0eebdcc9f94efd9a1bf@epcms1p3>
2020-10-30  4:39     ` HyungJae Im
2020-10-30 10:46       ` (2) " gregkh
     [not found]       ` <CGME20201029132747epcms1p8fae559dff47bf0eebdcc9f94efd9a1bf@epcms1p7>
2020-10-30 11:28         ` (3) " Jungrae Kim
2020-10-30 11:41           ` gregkh
     [not found]           ` <CGME20201029132747epcms1p8fae559dff47bf0eebdcc9f94efd9a1bf@epcms1p4>
2020-10-30 11:59             ` Jungrae Kim
2020-10-30 12:19               ` gregkh
     [not found]           ` <CGME20201029132747epcms1p8fae559dff47bf0eebdcc9f94efd9a1bf@epcms1p2>
2020-10-30 13:15             ` [PATCH] Input: add SW_COVER_ATTACHED and SW_EXT_PEN_ATTACHED Jungrae Kim
2020-10-30 15:41               ` Sebastian Reichel
2020-10-30 15:54     ` Jungrae Kim
2020-11-02 12:35   ` [PATCH v2] input: add 2 kind of switch kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201029132747epcms1p8fae559dff47bf0eebdcc9f94efd9a1bf@epcms1p8 \
    --to=hj2.im@samsung.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jryu.kim@samsung.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=rydberg@bitmath.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git