[PATCH AUTOSEL 5.10 01/41] HID: do not use down_interruptible() when unbinding devices

[PATCH AUTOSEL 5.10 01/41] HID: do not use down_interruptible() when unbinding devices

[Sasha Levin]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit f2145f8dc566c4f3b5a8deb58dcd12bed4e20194 ]

Action of unbinding driver from a device is not cancellable and should not
fail, and driver core does not pay attention to the result of "remove"
method, therefore using down_interruptible() in hid_device_remove() does
not make sense.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-core.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 0f69f35f2957..5550c943f985 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -2306,12 +2306,8 @@ static int hid_device_remove(struct device *dev)
 {
 	struct hid_device *hdev = to_hid_device(dev);
 	struct hid_driver *hdrv;
-	int ret = 0;
 
-	if (down_interruptible(&hdev->driver_input_lock)) {
-		ret = -EINTR;
-		goto end;
-	}
+	down(&hdev->driver_input_lock);
 	hdev->io_started = false;
 
 	hdrv = hdev->driver;
@@ -2326,8 +2322,8 @@ static int hid_device_remove(struct device *dev)
 
 	if (!hdev->io_started)
 		up(&hdev->driver_input_lock);
-end:
-	return ret;
+
+	return 0;
 }
 
 static ssize_t modalias_show(struct device *dev, struct device_attribute *a,
-- 
2.30.2

[PATCH AUTOSEL 5.10 06/41] Input: goodix - platform/x86: touchscreen_dmi - Move upside down quirks to touchscreen_dmi.c

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 5a6f0dbe621a5c20dc912ac474debf9f11129e03 ]

Move the DMI quirks for upside-down mounted Goodix touchscreens from
drivers/input/touchscreen/goodix.c to
drivers/platform/x86/touchscreen_dmi.c,
where all the other x86 touchscreen quirks live.

Note the touchscreen_dmi.c code attaches standard touchscreen
device-properties to an i2c-client device based on a combination of a
DMI match + a device-name match. I've verified that the: Teclast X98 Pro,
WinBook TW100 and WinBook TW700 uses an ACPI devicename of "GDIX1001:00"
based on acpidumps and/or dmesg output available on the web.

This patch was tested on a Teclast X89 tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210504185746.175461-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/goodix.c     | 52 ------------------------
 drivers/platform/x86/touchscreen_dmi.c | 56 ++++++++++++++++++++++++++
 2 files changed, 56 insertions(+), 52 deletions(-)

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 45113767db96..a06385c55af2 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -178,51 +178,6 @@ static const unsigned long goodix_irq_flags[] = {
 	IRQ_TYPE_LEVEL_HIGH,
 };
 
-/*
- * Those tablets have their coordinates origin at the bottom right
- * of the tablet, as if rotated 180 degrees
- */
-static const struct dmi_system_id rotated_screen[] = {
-#if defined(CONFIG_DMI) && defined(CONFIG_X86)
-	{
-		.ident = "Teclast X89",
-		.matches = {
-			/* tPAD is too generic, also match on bios date */
-			DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
-			DMI_MATCH(DMI_BOARD_NAME, "tPAD"),
-			DMI_MATCH(DMI_BIOS_DATE, "12/19/2014"),
-		},
-	},
-	{
-		.ident = "Teclast X98 Pro",
-		.matches = {
-			/*
-			 * Only match BIOS date, because the manufacturers
-			 * BIOS does not report the board name at all
-			 * (sometimes)...
-			 */
-			DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
-			DMI_MATCH(DMI_BIOS_DATE, "10/28/2015"),
-		},
-	},
-	{
-		.ident = "WinBook TW100",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "TW100")
-		}
-	},
-	{
-		.ident = "WinBook TW700",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "TW700")
-		},
-	},
-#endif
-	{}
-};
-
 static const struct dmi_system_id nine_bytes_report[] = {
 #if defined(CONFIG_DMI) && defined(CONFIG_X86)
 	{
@@ -1121,13 +1076,6 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
 				  ABS_MT_POSITION_Y, ts->prop.max_y);
 	}
 
-	if (dmi_check_system(rotated_screen)) {
-		ts->prop.invert_x = true;
-		ts->prop.invert_y = true;
-		dev_dbg(&ts->client->dev,
-			"Applying '180 degrees rotated screen' quirk\n");
-	}
-
 	if (dmi_check_system(nine_bytes_report)) {
 		ts->contact_size = 9;
 
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index 3743d895399e..e52ff09b81de 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -299,6 +299,23 @@ static const struct ts_dmi_data estar_beauty_hd_data = {
 	.properties	= estar_beauty_hd_props,
 };
 
+/* Generic props + data for upside-down mounted GDIX1001 touchscreens */
+static const struct property_entry gdix1001_upside_down_props[] = {
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	{ }
+};
+
+static const struct ts_dmi_data gdix1001_00_upside_down_data = {
+	.acpi_name	= "GDIX1001:00",
+	.properties	= gdix1001_upside_down_props,
+};
+
+static const struct ts_dmi_data gdix1001_01_upside_down_data = {
+	.acpi_name	= "GDIX1001:01",
+	.properties	= gdix1001_upside_down_props,
+};
+
 static const struct property_entry gp_electronic_t701_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 960),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 640),
@@ -1268,6 +1285,16 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "X3 Plus"),
 		},
 	},
+	{
+		/* Teclast X89 (Windows version / BIOS) */
+		.driver_data = (void *)&gdix1001_01_upside_down_data,
+		.matches = {
+			/* tPAD is too generic, also match on bios date */
+			DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
+			DMI_MATCH(DMI_BOARD_NAME, "tPAD"),
+			DMI_MATCH(DMI_BIOS_DATE, "12/19/2014"),
+		},
+	},
 	{
 		/* Teclast X98 Plus II */
 		.driver_data = (void *)&teclast_x98plus2_data,
@@ -1276,6 +1303,19 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "X98 Plus II"),
 		},
 	},
+	{
+		/* Teclast X98 Pro */
+		.driver_data = (void *)&gdix1001_00_upside_down_data,
+		.matches = {
+			/*
+			 * Only match BIOS date, because the manufacturers
+			 * BIOS does not report the board name at all
+			 * (sometimes)...
+			 */
+			DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
+			DMI_MATCH(DMI_BIOS_DATE, "10/28/2015"),
+		},
+	},
 	{
 		/* Trekstor Primebook C11 */
 		.driver_data = (void *)&trekstor_primebook_c11_data,
@@ -1351,6 +1391,22 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "VINGA Twizzle J116"),
 		},
 	},
+	{
+		/* "WinBook TW100" */
+		.driver_data = (void *)&gdix1001_00_upside_down_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TW100")
+		}
+	},
+	{
+		/* WinBook TW700 */
+		.driver_data = (void *)&gdix1001_00_upside_down_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TW700")
+		},
+	},
 	{
 		/* Yours Y8W81, same case and touchscreen as Chuwi Vi8 */
 		.driver_data = (void *)&chuwi_vi8_data,
-- 
2.30.2

[PATCH AUTOSEL 5.10 07/41] platform/x86: touchscreen_dmi: Add an extra entry for the upside down Goodix touchscreen on Teclast X89 tablets

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit a22e3803f2a4d947ff0083a9448a169269ea0f62 ]

Teclast X89 tablets come in 2 versions, with Windows pre-installed and with
Android pre-installed. These 2 versions have different DMI strings.

Add a match for the DMI strings used by the Android version BIOS.

Note the Android version BIOS has a bug in the DSDT where no IRQ is
provided, so for the touchscreen to work a DSDT override fixing this
is necessary as well.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210504185746.175461-4-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/touchscreen_dmi.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index e52ff09b81de..ebae21b78327 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -1285,6 +1285,14 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "X3 Plus"),
 		},
 	},
+	{
+		/* Teclast X89 (Android version / BIOS) */
+		.driver_data = (void *)&gdix1001_00_upside_down_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "WISKY"),
+			DMI_MATCH(DMI_BOARD_NAME, "3G062i"),
+		},
+	},
 	{
 		/* Teclast X89 (Windows version / BIOS) */
 		.driver_data = (void *)&gdix1001_01_upside_down_data,
-- 
2.30.2

[PATCH AUTOSEL 5.10 08/41] platform/x86: touchscreen_dmi: Add info for the Goodix GT912 panel of TM800A550L tablets

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit fcd8cf0e3e48f4c66af82c8e799c37cb0cccffe0 ]

The Bay Trail Glavey TM800A550L tablet, which ships with Android installed
from the factory, uses a GT912 touchscreen controller which needs to have
its firmware uploaded by the OS to work (this is a first for a x86 based
device with a Goodix touchscreen controller).

Add a touchscreen_dmi entry for this which specifies the filenames
to use for the firmware and config files needed for this.

Note this matches on a GDIX1001 ACPI HID, while the original DSDT uses
a HID of GODX0911. For the touchscreen to work on these devices a DSDT
override is necessary to fix a missing IRQ and broken GPIO settings in
the ACPI-resources for the touchscreen. This override also changes the
HID to the standard GDIX1001 id typically used for Goodix touchscreens.
The DSDT override is available here:
https://fedorapeople.org/~jwrdegoede/glavey-tm800a550l-dsdt-override/

Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210504185746.175461-5-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/touchscreen_dmi.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index ebae21b78327..99260915122c 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -316,6 +316,18 @@ static const struct ts_dmi_data gdix1001_01_upside_down_data = {
 	.properties	= gdix1001_upside_down_props,
 };
 
+static const struct property_entry glavey_tm800a550l_props[] = {
+	PROPERTY_ENTRY_STRING("firmware-name", "gt912-glavey-tm800a550l.fw"),
+	PROPERTY_ENTRY_STRING("goodix,config-name", "gt912-glavey-tm800a550l.cfg"),
+	PROPERTY_ENTRY_U32("goodix,main-clk", 54),
+	{ }
+};
+
+static const struct ts_dmi_data glavey_tm800a550l_data = {
+	.acpi_name	= "GDIX1001:00",
+	.properties	= glavey_tm800a550l_props,
+};
+
 static const struct property_entry gp_electronic_t701_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 960),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 640),
@@ -1012,6 +1024,15 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "eSTAR BEAUTY HD Intel Quad core"),
 		},
 	},
+	{	/* Glavey TM800A550L */
+		.driver_data = (void *)&glavey_tm800a550l_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			/* Above strings are too generic, also match on BIOS version */
+			DMI_MATCH(DMI_BIOS_VERSION, "ZY-8-BI-PX4S70VTR400-X423B-005-D"),
+		},
+	},
 	{
 		/* GP-electronic T701 */
 		.driver_data = (void *)&gp_electronic_t701_data,
-- 
2.30.2