Linux Input Archive on lore.kernel.org
 help / color / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Jiada Wang <jiada_wang@mentor.com>,
	jikos@kernel.org, benjamin.tissoires@redhat.com,
	rydberg@bitmath.org, dmitry.torokhov@gmail.com,
	nick@shmanahar.org, bsz@semihalf.com
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	erosca@de.adit-jv.com, Andrew_Gabbasov@mentor.com
Subject: Re: [PATCH v7 03/48] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary
Date: Wed, 18 Mar 2020 01:44:12 +0300
Message-ID: <8ea1244b-f045-df34-b6b2-2b812ab6dee4@gmail.com> (raw)
In-Reply-To: <20200212084218.32344-4-jiada_wang@mentor.com>

12.02.2020 11:41, Jiada Wang пишет:
> From: Nick Dyer <nick.dyer@itdev.co.uk>
> 
> The workaround of reading all messages until an invalid is received is a
> way of forcing the CHG line high, which means that when using
> edge-triggered interrupts the interrupt can be acquired.
> 
> With level-triggered interrupts the workaround is unnecessary.
> 
> Also, most recent maXTouch chips have a feature called RETRIGEN which, when
> enabled, reasserts the interrupt line every cycle if there are messages
> waiting. This also makes the workaround unnecessary.
> 
> Note: the RETRIGEN feature is only in some firmware versions/chips, it's
> not valid simply to enable the bit.

...
> +static int mxt_check_retrigen(struct mxt_data *data)
> +{
> +	struct i2c_client *client = data->client;
> +	int error;
> +	int val;
> +
> +	data->use_retrigen_workaround = false;
> +
> +	if (irq_get_trigger_type(data->irq) & IRQF_TRIGGER_LOW)
> +		return 0;
> +
> +	if (data->T18_address) {
> +		error = __mxt_read_reg(client,
> +				       data->T18_address + MXT_COMMS_CTRL,
> +				       1, &val);
> +		if (error)
> +			return error;
> +
> +		if (val & MXT_COMMS_RETRIGEN)
> +			return 0;
> +	}
> +
> +	dev_warn(&client->dev, "Enabling RETRIGEN workaround\n");
> +	data->use_retrigen_workaround = true;
> +	return 0;
> +}

Hello Jiada,

I'm seeing "Enabling RETRIGEN workaround" message with the following
device-tree entry:

touchscreen@4c {
	compatible = "atmel,maxtouch";
	reg = <0x4c>;

	interrupt-parent = <&gpio>;
	interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;

	reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
};

This happens because data->irq is NULL. Please fix it, thanks in advance.

  reply index

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-12  8:41 [PATCH v7 00/48] atmel_mxt_ts misc Jiada Wang
2020-02-12  8:41 ` [PATCH v7 01/48] Input: introduce input_mt_report_slot_inactive Jiada Wang
2020-02-12  8:41 ` [PATCH v7 02/48] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2020-02-12  8:41 ` [PATCH v7 03/48] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Jiada Wang
2020-03-17 22:44   ` Dmitry Osipenko [this message]
2020-03-18 13:02     ` Wang, Jiada
2020-02-12  8:41 ` [PATCH v7 04/48] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2020-02-12  8:41 ` [PATCH v7 05/48] Input: atmel_mxt_ts - output status from T48 Noise Supression Jiada Wang
2020-02-12  8:41 ` [PATCH v7 06/48] Input: atmel_mxt_ts - output status from T42 Touch Suppression Jiada Wang
2020-02-12  8:41 ` [PATCH v7 07/48] Input: atmel_mxt_ts - implement T9 vector/orientation support Jiada Wang
2020-02-12  8:41 ` [PATCH v7 08/48] Input: atmel_mxt_ts - implement T15 Key Array support Jiada Wang
2020-02-12  8:41 ` [PATCH v7 09/48] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2020-02-12  8:41 ` [PATCH v7 10/48] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2020-02-12  8:41 ` [PATCH v7 11/48] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
2020-02-12  8:41 ` [PATCH v7 12/48] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2020-02-12  8:41 ` [PATCH v7 13/48] Input: atmel_mxt_ts - add regulator control support Jiada Wang
2020-03-12 15:26   ` Dmitry Osipenko
2020-02-12  8:41 ` [PATCH v7 14/48] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2020-02-12  8:41 ` [PATCH v7 15/48] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2020-02-12  8:41 ` [PATCH v7 16/48] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs Jiada Wang
2020-02-12  8:41 ` [PATCH v7 17/48] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2020-02-12  8:41 ` [PATCH v7 18/48] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
2020-02-12  8:41 ` [PATCH v7 19/48] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2020-02-12  8:41 ` [PATCH v7 20/48] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func Jiada Wang
2020-02-12  8:41 ` [PATCH v7 21/48] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2020-02-12  8:41 ` [PATCH v7 22/48] Input: atmel_mxt_ts - improve bootloader state machine handling Jiada Wang
2020-03-12 15:28   ` Dmitry Osipenko
2020-02-12  8:41 ` [PATCH v7 23/48] Input: atmel_mxt_ts - rename bl_completion to chg_completion Jiada Wang
2020-02-12  8:41 ` [PATCH v7 24/48] Input: atmel_mxt_ts - make bootloader interrupt driven Jiada Wang
2020-02-12  8:41 ` [PATCH v7 25/48] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators Jiada Wang
2020-02-12  8:41 ` [PATCH v7 26/48] Input: atmel_mxt_ts - implement I2C retries Jiada Wang
2020-02-12  8:41 ` [PATCH v7 27/48] Input: atmel_mxt_ts - orientation is not present in hover Jiada Wang
2020-02-12  8:41 ` [PATCH v7 28/48] Input: atmel_mxt_ts - implement debug output for messages Jiada Wang
2020-02-12  8:41 ` [PATCH v7 29/48] Input: atmel_mxt_ts - implement improved debug message interface Jiada Wang
2020-02-12  8:42 ` [PATCH v7 30/48] Input: atmel_mxt_ts - eliminate data->raw_info_block Jiada Wang
2020-02-12  8:42 ` [PATCH v7 31/48] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions Jiada Wang
2020-02-12  8:42 ` [PATCH v7 32/48] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang
2020-02-12  8:42 ` [PATCH v7 33/48] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang
2020-02-12  8:42 ` [PATCH v7 34/48] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays Jiada Wang
2020-02-12  8:42 ` [PATCH v7 35/48] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2020-02-12  8:42 ` [PATCH v7 36/48] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction Jiada Wang
2020-02-12  8:42 ` [PATCH v7 37/48] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid() Jiada Wang
2020-02-12  8:42 ` [PATCH v7 38/48] Input: Atmel: improve error handling in mxt_start() Jiada Wang
2020-02-12  8:42 ` [PATCH v7 39/48] Input: Atmel: improve error handling in mxt_initialize() Jiada Wang
2020-02-12  8:42 ` [PATCH v7 40/48] Input: Atmel: improve error handling in mxt_update_cfg() Jiada Wang
2020-02-12  8:42 ` [PATCH v7 41/48] Input: Atmel: Improve error handling in mxt_initialize_input_device() Jiada Wang
2020-02-12  8:42 ` [PATCH v7 42/48] Input: Atmel: handle ReportID "0x00" while processing T5 messages Jiada Wang
2020-02-12  8:42 ` [PATCH v7 43/48] Input: Atmel: use T44 object to process " Jiada Wang
2020-02-12  8:42 ` [PATCH v7 44/48] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2020-02-12  8:42 ` [PATCH v7 45/48] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2020-02-12  8:42 ` [PATCH v7 46/48] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data Jiada Wang
2020-02-12  8:42 ` [PATCH v7 47/48] Input: atmel_mxt_ts: Implement synchronization during various operation Jiada Wang
2020-02-12  8:42 ` [PATCH v7 48/48] Input: atmel_mxt_ts - Fix compilation warning Jiada Wang
2020-03-11  1:09 ` [PATCH v7 00/48] atmel_mxt_ts misc Wang, Jiada
2020-03-12 15:21 ` Dmitry Osipenko
2020-03-16  6:50   ` Wang, Jiada
2020-03-20  3:37   ` Wang, Jiada
2020-03-20 15:53     ` Dmitry Osipenko
2020-03-23  2:25       ` Wang, Jiada
2020-03-24 14:54         ` Dmitry Osipenko
2020-03-24 15:03           ` Dmitry Osipenko
2020-03-25 12:13           ` Wang, Jiada

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8ea1244b-f045-df34-b6b2-2b812ab6dee4@gmail.com \
    --to=digetx@gmail.com \
    --cc=Andrew_Gabbasov@mentor.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=bsz@semihalf.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=erosca@de.adit-jv.com \
    --cc=jiada_wang@mentor.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nick@shmanahar.org \
    --cc=rydberg@bitmath.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git