[PATCH v2 1/3] Revert "HID: logitech-hidpp: add a module parameter to keep firmware gestures"

[PATCH v2 1/3] Revert "HID: logitech-hidpp: add a module parameter to keep firmware gestures"

[Bastien Nocera]

Now that we're in 2022, and the majority of desktop environments can and
should support touchpad gestures through libinput, remove the legacy
module parameter that made it possible to use gestures implemented in
firmware.

This will eventually allow simplifying the driver's initialisation code.

This reverts commit 9188dbaed68a4b23dc96eba165265c08caa7dc2a.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
---
 drivers/hid/hid-logitech-hidpp.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 08ad19097e9e..7f9187201913 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -32,11 +32,6 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
 MODULE_AUTHOR("Nestor Lopez Casado <nlopezcasad@logitech.com>");
 
-static bool disable_raw_mode;
-module_param(disable_raw_mode, bool, 0644);
-MODULE_PARM_DESC(disable_raw_mode,
-	"Disable Raw mode reporting for touchpads and keep firmware gestures.");
-
 static bool disable_tap_to_click;
 module_param(disable_tap_to_click, bool, 0644);
 MODULE_PARM_DESC(disable_tap_to_click,
@@ -4355,11 +4350,6 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	    hidpp_application_equals(hdev, HID_GD_KEYBOARD))
 		hidpp->quirks |= HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS;
 
-	if (disable_raw_mode) {
-		hidpp->quirks &= ~HIDPP_QUIRK_CLASS_WTP;
-		hidpp->quirks &= ~HIDPP_QUIRK_NO_HIDINPUT;
-	}
-
 	if (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP) {
 		ret = wtp_allocate(hdev, id);
 		if (ret)
-- 
2.38.1

[PATCH v2 2/3] HID: logitech-hidpp: Don't restart communication if not necessary

[Bastien Nocera]

Don't stop and restart communication with the device unless we need to
modify the connect flags used because of a device quirk.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
---
 drivers/hid/hid-logitech-hidpp.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 7f9187201913..b4e4a8c79c75 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -4310,6 +4310,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	bool connected;
 	unsigned int connect_mask = HID_CONNECT_DEFAULT;
 	struct hidpp_ff_private_data data;
+	bool will_restart = false;
 
 	/* report_fixup needs drvdata to be set before we call hid_parse */
 	hidpp = devm_kzalloc(&hdev->dev, sizeof(*hidpp), GFP_KERNEL);
@@ -4360,6 +4361,9 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 			return ret;
 	}
 
+	if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT)
+		will_restart = true;
+
 	INIT_WORK(&hidpp->work, delayed_work_cb);
 	mutex_init(&hidpp->send_mutex);
 	init_waitqueue_head(&hidpp->wait);
@@ -4374,7 +4378,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	 * Plain USB connections need to actually call start and open
 	 * on the transport driver to allow incoming data.
 	 */
-	ret = hid_hw_start(hdev, 0);
+	ret = hid_hw_start(hdev, will_restart ? 0 : connect_mask);
 	if (ret) {
 		hid_err(hdev, "hw start failed\n");
 		goto hid_hw_start_fail;
@@ -4411,6 +4415,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 			hidpp->wireless_feature_index = 0;
 		else if (ret)
 			goto hid_hw_init_fail;
+		ret = 0;
 	}
 
 	if (connected && (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)) {
@@ -4425,19 +4430,21 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 	hidpp_connect_event(hidpp);
 
-	/* Reset the HID node state */
-	hid_device_io_stop(hdev);
-	hid_hw_close(hdev);
-	hid_hw_stop(hdev);
+	if (will_restart) {
+		/* Reset the HID node state */
+		hid_device_io_stop(hdev);
+		hid_hw_close(hdev);
+		hid_hw_stop(hdev);
 
-	if (hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT)
-		connect_mask &= ~HID_CONNECT_HIDINPUT;
+		if (hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT)
+			connect_mask &= ~HID_CONNECT_HIDINPUT;
 
-	/* Now export the actual inputs and hidraw nodes to the world */
-	ret = hid_hw_start(hdev, connect_mask);
-	if (ret) {
-		hid_err(hdev, "%s:hid_hw_start returned error\n", __func__);
-		goto hid_hw_start_fail;
+		/* Now export the actual inputs and hidraw nodes to the world */
+		ret = hid_hw_start(hdev, connect_mask);
+		if (ret) {
+			hid_err(hdev, "%s:hid_hw_start returned error\n", __func__);
+			goto hid_hw_start_fail;
+		}
 	}
 
 	if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
-- 
2.38.1

[PATCH v2 3/3] HID: logitech-hidpp: Remove HIDPP_QUIRK_NO_HIDINPUT quirk

[Bastien Nocera]

HIDPP_QUIRK_NO_HIDINPUT isn't used by any devices but still happens to
work as HIDPP_QUIRK_DELAYED_INIT is defined to the same value. Remove
HIDPP_QUIRK_NO_HIDINPUT and use HIDPP_QUIRK_DELAYED_INIT everywhere
instead.

Tested on a T650 which requires that quirk, and a number of unifying and
Bluetooth devices that don't.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
---
 drivers/hid/hid-logitech-hidpp.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index b4e4a8c79c75..2092fb1be627 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -67,7 +67,7 @@ MODULE_PARM_DESC(disable_tap_to_click,
 /* bits 2..20 are reserved for classes */
 /* #define HIDPP_QUIRK_CONNECT_EVENTS		BIT(21) disabled */
 #define HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS	BIT(22)
-#define HIDPP_QUIRK_NO_HIDINPUT			BIT(23)
+#define HIDPP_QUIRK_DELAYED_INIT		BIT(23)
 #define HIDPP_QUIRK_FORCE_OUTPUT_REPORTS	BIT(24)
 #define HIDPP_QUIRK_UNIFYING			BIT(25)
 #define HIDPP_QUIRK_HIDPP_WHEELS		BIT(26)
@@ -83,8 +83,6 @@ MODULE_PARM_DESC(disable_tap_to_click,
 					 HIDPP_CAPABILITY_HIDPP20_HI_RES_SCROLL | \
 					 HIDPP_CAPABILITY_HIDPP20_HI_RES_WHEEL)
 
-#define HIDPP_QUIRK_DELAYED_INIT		HIDPP_QUIRK_NO_HIDINPUT
-
 #define HIDPP_CAPABILITY_HIDPP10_BATTERY	BIT(0)
 #define HIDPP_CAPABILITY_HIDPP20_BATTERY	BIT(1)
 #define HIDPP_CAPABILITY_BATTERY_MILEAGE	BIT(2)
@@ -4205,7 +4203,7 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
 	if (hidpp->capabilities & HIDPP_CAPABILITY_HI_RES_SCROLL)
 		hi_res_scroll_enable(hidpp);
 
-	if (!(hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT) || hidpp->delayed_input)
+	if (!(hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT) || hidpp->delayed_input)
 		/* if the input nodes are already created, we can stop now */
 		return;
 
@@ -4436,7 +4434,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		hid_hw_close(hdev);
 		hid_hw_stop(hdev);
 
-		if (hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT)
+		if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT)
 			connect_mask &= ~HID_CONNECT_HIDINPUT;
 
 		/* Now export the actual inputs and hidraw nodes to the world */
-- 
2.38.1

Re: [PATCH v2 1/3] Revert "HID: logitech-hidpp: add a module parameter to keep firmware gestures"

[Benjamin Tissoires]

On Tue, Dec 20, 2022 at 4:43 PM Bastien Nocera <hadess@hadess.net> wrote:
>
> Now that we're in 2022, and the majority of desktop environments can and
> should support touchpad gestures through libinput, remove the legacy
> module parameter that made it possible to use gestures implemented in
> firmware.
>
> This will eventually allow simplifying the driver's initialisation code.
>
> This reverts commit 9188dbaed68a4b23dc96eba165265c08caa7dc2a.
>
> Signed-off-by: Bastien Nocera <hadess@hadess.net>

Applied just this one to for-6.3/logitech

Cheers,
Benjamin

> ---
>  drivers/hid/hid-logitech-hidpp.c | 10 ----------
>  1 file changed, 10 deletions(-)
>
> diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
> index 08ad19097e9e..7f9187201913 100644
> --- a/drivers/hid/hid-logitech-hidpp.c
> +++ b/drivers/hid/hid-logitech-hidpp.c
> @@ -32,11 +32,6 @@ MODULE_LICENSE("GPL");
>  MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
>  MODULE_AUTHOR("Nestor Lopez Casado <nlopezcasad@logitech.com>");
>
> -static bool disable_raw_mode;
> -module_param(disable_raw_mode, bool, 0644);
> -MODULE_PARM_DESC(disable_raw_mode,
> -       "Disable Raw mode reporting for touchpads and keep firmware gestures.");
> -
>  static bool disable_tap_to_click;
>  module_param(disable_tap_to_click, bool, 0644);
>  MODULE_PARM_DESC(disable_tap_to_click,
> @@ -4355,11 +4350,6 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
>             hidpp_application_equals(hdev, HID_GD_KEYBOARD))
>                 hidpp->quirks |= HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS;
>
> -       if (disable_raw_mode) {
> -               hidpp->quirks &= ~HIDPP_QUIRK_CLASS_WTP;
> -               hidpp->quirks &= ~HIDPP_QUIRK_NO_HIDINPUT;
> -       }
> -
>         if (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP) {
>                 ret = wtp_allocate(hdev, id);
>                 if (ret)
> --
> 2.38.1
>