linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Luke Jones <luke@ljones.dev>
To: jikos@kernel.org
Cc: benjamin.tissoires@redhat.com, linux-kernel@vger.kernel.org,
	linux-input@vger.kernel.org, jikos@kernel.org
Subject: Re: [PATCH V6 RESEND] HID: ASUS: Add support for ASUS N-Key keyboard
Date: Thu, 08 Oct 2020 22:33:13 +1300	[thread overview]
Message-ID: <DJMVHQ.SA2BSRZF0Q7A@ljones.dev> (raw)
In-Reply-To: <20200923215633.209724-1-luke@ljones.dev>

Jikos, is it possible we could try to get this moving? I have something
like 300+ users in a Discord channel using laptops this this particular
device, and more keep arriving. It's a good problem to have but the
support isn't something I have much time for now. Users rely on a
daemon I wrote to manage ASUS AniME and RGB keyboards, which in turn
relies on this patch, which, in turn, relies on users being able to
either compile a kernel, install a custom one, or use dkms.

The main change from previous version beyond cleanup is to use existing
key event codes for the Aura-mode buttons so that there is no hold-up
to okay the removed *new* codes. In future I will go through the
process of adding custom codes.

Many thanks.
Luke.

On Thu, Sep 24, 2020 at 09:56, Luke D Jones <luke@ljones.dev> wrote:
> The ASUS N-Key keyboard uses the productId of 0x1866 and is used in
> almost all modern ASUS gaming laptops with slight changes to the
> firmware. This patch enables: Fn+key hotkeys, keyboard backlight
> brightness control, and notify asus-wmi to toggle "fan-mode".
> 
> The keyboard has many of the same key outputs as the existing G752
> keyboard including a few extras, and varies a little between laptop
> models. The key-sets have been split and sub-grouped so that there
> will not be conflict between key event codes used.
> 
> An existing key event used across some keyboards for "Mic Toggle"
> has been changed to emit "F20" as this is what all the main
> desktop environments are using.
> 
> Additionally this keyboard requires the LED interface to be
> intitialised before such things as keyboard backlight control work.
> 
> Misc changes in scope: update some hardcoded comparisons to use an
> available define.
> 
> Signed-off-by: Luke D Jones <luke@ljones.dev>
> ---
>  drivers/hid/hid-asus.c                     | 188 
> ++++++++++++++++++---
>  drivers/hid/hid-ids.h                      |   1 +
>  include/linux/platform_data/x86/asus-wmi.h |   2 +
>  3 files changed, 166 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c
> index c183caf89d49..541c92a7f108 100644
> --- a/drivers/hid/hid-asus.c
> +++ b/drivers/hid/hid-asus.c
> @@ -26,6 +26,8 @@
>  #include <linux/dmi.h>
>  #include <linux/hid.h>
>  #include <linux/module.h>
> +
> +#include <linux/acpi.h>
>  #include <linux/platform_data/x86/asus-wmi.h>
>  #include <linux/input/mt.h>
>  #include <linux/usb.h> /* For to_usb_interface for T100 touchpad 
> intf check */
> @@ -48,6 +50,8 @@ MODULE_DESCRIPTION("Asus HID Keyboard and 
> TouchPad");
>  #define INPUT_REPORT_ID 0x5d
>  #define FEATURE_KBD_REPORT_ID 0x5a
>  #define FEATURE_KBD_REPORT_SIZE 16
> +#define FEATURE_KBD_LED_REPORT_ID1 0x5d
> +#define FEATURE_KBD_LED_REPORT_ID2 0x5e
> 
>  #define SUPPORT_KBD_BACKLIGHT BIT(0)
> 
> @@ -80,6 +84,7 @@ MODULE_DESCRIPTION("Asus HID Keyboard and 
> TouchPad");
>  #define QUIRK_T101HA_DOCK		BIT(9)
>  #define QUIRK_T90CHI			BIT(10)
>  #define QUIRK_MEDION_E1239T		BIT(11)
> +#define QUIRK_ROG_NKEY_KEYBOARD		BIT(12)
> 
>  #define I2C_KEYBOARD_QUIRKS			(QUIRK_FIX_NOTEBOOK_REPORT | \
>  						 QUIRK_NO_INIT_REPORTS | \
> @@ -305,10 +310,33 @@ static int asus_e1239t_event(struct 
> asus_drvdata *drvdat, u8 *data, int size)
>  	return 0;
>  }
> 
> +/*
> + * This enables triggering events in asus-wmi
> + */
> +static int asus_wmi_send_event(struct asus_drvdata *drvdat, u8 code)
> +{
> +	int err;
> +	u32 retval;
> +
> +	err = asus_wmi_evaluate_method(ASUS_WMI_METHODID_DEVS,
> +		ASUS_WMI_METHODID_NOTIF, code, &retval);
> +	if (err) {
> +		pr_warn("Failed to notify asus-wmi: %d\n", err);
> +		return err;
> +	}
> +
> +	if (retval != 0) {
> +		pr_warn("Failed to notify asus-wmi (retval): 0x%x\n", retval);
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
>  static int asus_event(struct hid_device *hdev, struct hid_field 
> *field,
>  		      struct hid_usage *usage, __s32 value)
>  {
> -	if ((usage->hid & HID_USAGE_PAGE) == 0xff310000 &&
> +	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_ASUSVENDOR &&
>  	    (usage->hid & HID_USAGE) != 0x00 &&
>  	    (usage->hid & HID_USAGE) != 0xff && !usage->type) {
>  		hid_warn(hdev, "Unmapped Asus vendor usagepage code 0x%02x\n",
> @@ -321,6 +349,7 @@ static int asus_event(struct hid_device *hdev, 
> struct hid_field *field,
>  static int asus_raw_event(struct hid_device *hdev,
>  		struct hid_report *report, u8 *data, int size)
>  {
> +	int ret;
>  	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
> 
>  	if (drvdata->battery && data[0] == BATTERY_REPORT_ID)
> @@ -332,6 +361,35 @@ static int asus_raw_event(struct hid_device 
> *hdev,
>  	if (drvdata->quirks & QUIRK_MEDION_E1239T)
>  		return asus_e1239t_event(drvdata, data, size);
> 
> +	if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
> +		/*
> +		 * Skip these report ID, the device emits a continuous stream 
> associated
> +		 * with the AURA mode it is in which looks like an 'echo'
> +		*/
> +		if (report->id == FEATURE_KBD_LED_REPORT_ID1 ||
> +				report->id == FEATURE_KBD_LED_REPORT_ID2) {
> +			return -1;
> +		/* Additional report filtering */
> +		} else if (report->id == FEATURE_KBD_REPORT_ID) {
> +			/* Fn+F5 "fan" symbol, trigger WMI event to toggle next mode */
> +			if (data[1] == 0xae) {
> +				ret = asus_wmi_send_event(drvdata, 0xae);
> +				if (ret < 0) {
> +					hid_warn(hdev, "Asus failed to trigger fan control event");
> +				}
> +				return -1;
> +			/*
> +			 * G14 and G15 send these codes on some keypresses with no
> +			 * discernable reason for doing so. We'll filter them out to avoid
> +			 * unmapped warning messages later
> +			*/
> +			} else if (data[1] == 0xea || data[1] == 0xec || data[1] == 0x02 
> ||
> +					data[1] == 0x8a || data[1] == 0x9e) {
> +				return -1;
> +			}
> +		}
> +	}
> +
>  	return 0;
>  }
> 
> @@ -344,7 +402,11 @@ static int asus_kbd_set_report(struct hid_device 
> *hdev, u8 *buf, size_t buf_size
>  	if (!dmabuf)
>  		return -ENOMEM;
> 
> -	ret = hid_hw_raw_request(hdev, FEATURE_KBD_REPORT_ID, dmabuf,
> +	/*
> +	 * The report ID should be set from the incoming buffer due to LED 
> and key
> +	 * interfaces having different pages
> +	*/
> +	ret = hid_hw_raw_request(hdev, buf[0], dmabuf,
>  				 buf_size, HID_FEATURE_REPORT,
>  				 HID_REQ_SET_REPORT);
>  	kfree(dmabuf);
> @@ -397,6 +459,44 @@ static int asus_kbd_get_functions(struct 
> hid_device *hdev,
>  	return ret;
>  }
> 
> +static int asus_kbd_led_init(struct hid_device *hdev)
> +{
> +	u8 buf_init_start[] = { FEATURE_KBD_LED_REPORT_ID1, 0xB9 };
> +	u8 buf_init2[] = { FEATURE_KBD_LED_REPORT_ID1, 0x41, 0x53, 0x55, 
> 0x53, 0x20,
> +				0x54, 0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 };
> +	u8 buf_init3[] = { FEATURE_KBD_LED_REPORT_ID1,
> +						0x05, 0x20, 0x31, 0x00, 0x08 };
> +	int ret;
> +
> +	hid_warn(hdev, "Asus initialise N-KEY Device");
> +	/* The first message is an init start */
> +	ret = asus_kbd_set_report(hdev, buf_init_start, 
> sizeof(buf_init_start));
> +	if (ret < 0)
> +		hid_err(hdev, "Asus failed to send init start command: %d\n", ret);
> +	/* Followed by a string */
> +	ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
> +	if (ret < 0)
> +		hid_err(hdev, "Asus failed to send init command 1.0: %d\n", ret);
> +	/* Followed by a string */
> +	ret = asus_kbd_set_report(hdev, buf_init3, sizeof(buf_init3));
> +	if (ret < 0)
> +		hid_err(hdev, "Asus failed to send init command 1.1: %d\n", ret);
> +
> +	/* begin second report ID with same data */
> +	buf_init2[0] = FEATURE_KBD_LED_REPORT_ID2;
> +	buf_init3[0] = FEATURE_KBD_LED_REPORT_ID2;
> +
> +	ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
> +	if (ret < 0)
> +		hid_err(hdev, "Asus failed to send init command 2.0: %d\n", ret);
> +
> +	ret = asus_kbd_set_report(hdev, buf_init3, sizeof(buf_init3));
> +	if (ret < 0)
> +		hid_err(hdev, "Asus failed to send init command 2.1: %d\n", ret);
> +
> +	return ret;
> +}
> +
>  static void asus_kbd_backlight_set(struct led_classdev *led_cdev,
>  				   enum led_brightness brightness)
>  {
> @@ -460,19 +560,28 @@ static int asus_kbd_register_leds(struct 
> hid_device *hdev)
>  	unsigned char kbd_func;
>  	int ret;
> 
> -	/* Initialize keyboard */
> -	ret = asus_kbd_init(hdev);
> -	if (ret < 0)
> -		return ret;
> +	if (drvdata->quirks & QUIRK_G752_KEYBOARD) {
> +		/* Initialize keyboard */
> +		ret = asus_kbd_init(hdev);
> +		if (ret < 0)
> +			return ret;
> 
> -	/* Get keyboard functions */
> -	ret = asus_kbd_get_functions(hdev, &kbd_func);
> -	if (ret < 0)
> -		return ret;
> +		/* Get keyboard functions */
> +		ret = asus_kbd_get_functions(hdev, &kbd_func);
> +		if (ret < 0)
> +			return ret;
> 
> -	/* Check for backlight support */
> -	if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))
> -		return -ENODEV;
> +		/* Check for backlight support */
> +		if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))
> +			return -ENODEV;
> +	}
> +
> +	if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
> +		/* Initialize keyboard LED interface and Vendor keys on 0x1866 */
> +		ret = asus_kbd_led_init(hdev);
> +		if (ret < 0)
> +			return ret;
> +	}
> 
>  	drvdata->kbd_backlight = devm_kzalloc(&hdev->dev,
>  					      sizeof(struct asus_kbd_leds),
> @@ -751,14 +860,14 @@ static int asus_input_mapping(struct hid_device 
> *hdev,
>  	     usage->hid == (HID_UP_GENDEVCTRLS | 0x0026)))
>  		return -1;
> 
> -	/* ASUS-specific keyboard hotkeys */
> -	if ((usage->hid & HID_USAGE_PAGE) == 0xff310000) {
> +	/* ASUS-specific keyboard hotkeys and led backlight */
> +	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_ASUSVENDOR) {
>  		switch (usage->hid & HID_USAGE) {
>  		case 0x10: asus_map_key_clear(KEY_BRIGHTNESSDOWN);	break;
>  		case 0x20: asus_map_key_clear(KEY_BRIGHTNESSUP);		break;
>  		case 0x35: asus_map_key_clear(KEY_DISPLAY_OFF);		break;
>  		case 0x6c: asus_map_key_clear(KEY_SLEEP);		break;
> -		case 0x7c: asus_map_key_clear(KEY_MICMUTE);		break;
> +		case 0x7c: asus_map_key_clear(KEY_F20);		break;
>  		case 0x82: asus_map_key_clear(KEY_CAMERA);		break;
>  		case 0x88: asus_map_key_clear(KEY_RFKILL);			break;
>  		case 0xb5: asus_map_key_clear(KEY_CALC);			break;
> @@ -771,16 +880,42 @@ static int asus_input_mapping(struct hid_device 
> *hdev,
>  		/* ROG key */
>  		case 0x38: asus_map_key_clear(KEY_PROG1);		break;
> 
> -		/* Fn+C ASUS Splendid */
> -		case 0xba: asus_map_key_clear(KEY_PROG2);		break;
> -
> -		/* Fn+Space Power4Gear Hybrid */
> -		case 0x5c: asus_map_key_clear(KEY_PROG3);		break;
> -
> -		/* Fn+F5 "fan" symbol on FX503VD */
> -		case 0x99: asus_map_key_clear(KEY_PROG4);		break;
> -
> +		/* The keyboard ID's in this section don't share key events */
>  		default:
> +			if (drvdata->quirks & QUIRK_G752_KEYBOARD) {
> +				switch (usage->hid & HID_USAGE) {
> +				/* Fn+C ASUS Splendid */
> +				case 0xba: asus_map_key_clear(KEY_PROG2);		break;
> +
> +				/* Fn+Space Power4Gear Hybrid */
> +				case 0x5c: asus_map_key_clear(KEY_PROG3);		break;
> +
> +				/* Fn+F5 "fan" symbol on FX503VD */
> +				case 0x99: asus_map_key_clear(KEY_PROG4);		break;
> +
> +				default:
> +					return -1;
> +				}
> +				break;
> +			}
> +			/* device 0x1866, N-KEY Device specific */
> +			else if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
> +				switch (usage->hid & HID_USAGE) {
> +				/* Fn+Ret "Calc" symbol on device 0x1866, N-KEY Device */
> +				case 0x92: asus_map_key_clear(KEY_CALC);		break;
> +
> +				/* Fn+Left Aura mode previous */
> +				case 0xb2: asus_map_key_clear(KEY_PROG2);	break;
> +
> +				/* Fn+Right Aura mode next */
> +				case 0xb3: asus_map_key_clear(KEY_PROG3);	break;
> +
> +				default:
> +					return -1;
> +				}
> +				break;
> +			}
> +
>  			/* ASUS lazily declares 256 usages, ignore the rest,
>  			 * as some make the keyboard appear as a pointer device. */
>  			return -1;
> @@ -1126,6 +1261,9 @@ static const struct hid_device_id 
> asus_devices[] = {
>  	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
>  		USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD),
>  	  QUIRK_USE_KBD_BACKLIGHT },
> +	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
> +	    USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD),
> +	  QUIRK_USE_KBD_BACKLIGHT | QUIRK_ROG_NKEY_KEYBOARD },
>  	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
>  		USB_DEVICE_ID_ASUSTEK_T100TA_KEYBOARD),
>  	  QUIRK_T100_KEYBOARD | QUIRK_NO_CONSUMER_USAGES },
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 74fc1df6e3c2..ce5ca078b232 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -190,6 +190,7 @@
>  #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1 0x1854
>  #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2 0x1837
>  #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD3 0x1822
> +#define USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD	0x1866
>  #define USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD	0x1869
> 
>  #define USB_VENDOR_ID_ATEN		0x0557
> diff --git a/include/linux/platform_data/x86/asus-wmi.h 
> b/include/linux/platform_data/x86/asus-wmi.h
> index 897b8332a39f..05253cfe786c 100644
> --- a/include/linux/platform_data/x86/asus-wmi.h
> +++ b/include/linux/platform_data/x86/asus-wmi.h
> @@ -27,6 +27,8 @@
>  #define ASUS_WMI_METHODID_INIT		0x54494E49 /* INITialize */
>  #define ASUS_WMI_METHODID_HKEY		0x59454B48 /* Hot KEY ?? */
> 
> +#define ASUS_WMI_METHODID_NOTIF		0x00100021 /* Notify method ?? */
> +
>  #define ASUS_WMI_UNSUPPORTED_METHOD	0xFFFFFFFE
> 
>  /* Wireless */
> --
> 2.26.2
> 



  reply	other threads:[~2020-10-08  9:33 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-23 21:56 [PATCH V6 RESEND] HID: ASUS: Add support for ASUS N-Key keyboard Luke D Jones
2020-10-08  9:33 ` Luke Jones [this message]
2020-10-09  9:38 ` Jiri Kosina
2020-10-09 13:14   ` Andy Shevchenko
2020-10-09 13:37     ` Hans de Goede
2020-10-09 14:03       ` Andy Shevchenko
2020-10-09 14:22 ` Hans de Goede
2020-10-11  7:05   ` Luke Jones
2020-10-12  9:51     ` Hans de Goede
2020-10-12 10:14       ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DJMVHQ.SA2BSRZF0Q7A@ljones.dev \
    --to=luke@ljones.dev \
    --cc=benjamin.tissoires@redhat.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).