From: Arvind Sankar <email@example.com> To: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Rob Landley <firstname.lastname@example.org>, Andy Lutomirski <email@example.com>, Arvind Sankar <firstname.lastname@example.org>, LKML <email@example.com>, Linux API <firstname.lastname@example.org>, Linux FS Devel <email@example.com>, linux-integrity <firstname.lastname@example.org>, email@example.com Subject: Re: [PATCH v2 0/3] initramfs: add support for xattrs in the initial ram disk Date: Tue, 14 May 2019 20:52:21 -0400 Message-ID: <20190515005221.GB88615@rani.riverdale.lan> (raw) In-Reply-To: <1557878052.2873.6.camel@HansenPartnership.com> On Tue, May 14, 2019 at 04:54:12PM -0700, James Bottomley wrote: > On Tue, 2019-05-14 at 18:39 -0500, Rob Landley wrote: > > On 5/14/19 2:18 PM, James Bottomley wrote: > > > > I think Rob is right here. If /init was statically built into > > > > the kernel image, it has no more ability to compromise the kernel > > > > than anything else in the kernel. What's the problem here? > > > > > > The specific problem is that unless you own the kernel signing key, > > > which is really untrue for most distribution consumers because the > > > distro owns the key, you cannot build the initrd statically into > > > the kernel. You can take the distro signed kernel, link it with > > > the initrd then resign the combination with your key, provided you > > > insert your key into the MoK variables as a trusted secure boot > > > key, but the distros have been unhappy recommending this as > > > standard practice. > > > > > > If our model for security is going to be to link the kernel and the > > > initrd statically to give signature protection over the aggregate > > > then we need to figure out how to execute this via the distros. If > > > we accept that the split model, where the distro owns and signs the > > > kernel but the machine owner builds and is responsible for the > > > initrd, then we need to explore split security models like this > > > proposal. > > > > You can have a built-in and an external initrd? The second extracts > > over the first? (I know because once upon a time conflicting files > > would append. It sounds like the desired behavior here is O_EXCL fail > > and move on.) > > Technically yes, because the first initrd could find the second by some > predefined means, extract it to a temporary directory and do a > pivot_root() and then the second would do some stuff, find the real > root and do a pivot_root() again. However, while possible, wouldn't it > just add to the rendezvous complexity without adding any benefits? even > if the first initrd is built and signed by the distro and the second is > built by you, the first has to verify the second somehow. I suppose > the second could be tar extracted, which would add xattrs, if that's > the goal? > > James > You can specify multiple initrd's to the boot loader, and they get loaded in sequence into memory and parsed by the kernel before /init is launched. Currently I believe later ones will overwrite the earlier ones, which is why we've been talking about adding an option to prevent that. You don't have to mess with manually finding/parsing initramfs's which wouldn't even be feasible since you may not have the drivers loaded yet to access the device/filesystem on which they live. Once that's done, the embedded /init is just going to do in userspace wht the current patch does in the kernel. So all the files in the external initramfs(es) would need to have IMA signatures via the special xattr file. Note that if you want the flexibility to be able to load one or both of two external initramfs's, the current in-kernel proposal wouldn't be enough -- the xattr specification would have to be more flexible (eg reading .xattr-list* to allow each initramfs to specifiy its own xattrs. This sort of enhancement would be much easier to handle with the userspace variant.
next prev parent reply index Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-09 11:24 Roberto Sassu 2019-05-09 11:24 ` [PATCH v2 1/3] fs: add ksys_lsetxattr() wrapper Roberto Sassu 2019-05-10 21:28 ` Jann Horn 2019-05-09 11:24 ` [PATCH v2 2/3] initramfs: set extended attributes Roberto Sassu 2019-05-09 11:24 ` [PATCH v2 3/3] initramfs: introduce do_readxattrs() Roberto Sassu 2019-05-10 21:33 ` Jann Horn 2019-05-13 13:03 ` Roberto Sassu 2019-05-09 18:34 ` [PATCH v2 0/3] initramfs: add support for xattrs in the initial ram disk Rob Landley 2019-05-10 6:56 ` Roberto Sassu 2019-05-10 11:49 ` Mimi Zohar 2019-05-10 20:46 ` Rob Landley 2019-05-10 22:38 ` Mimi Zohar 2019-05-11 22:44 ` Andy Lutomirski 2019-05-12 4:04 ` Rob Landley 2019-05-12 4:12 ` Rob Landley 2019-05-12 9:17 ` Dominik Brodowski 2019-05-12 10:18 ` hpa 2019-05-12 15:31 ` Dominik Brodowski 2019-05-13 0:02 ` Mimi Zohar 2019-05-13 0:21 ` hpa 2019-05-13 0:23 ` hpa 2019-05-12 12:52 ` Mimi Zohar 2019-05-12 17:05 ` Rob Landley 2019-05-12 19:43 ` Arvind Sankar 2019-05-13 7:49 ` Roberto Sassu 2019-05-13 9:07 ` Rob Landley 2019-05-13 12:08 ` Mimi Zohar 2019-05-13 12:47 ` Roberto Sassu 2019-05-13 17:20 ` Arvind Sankar 2019-05-13 17:51 ` Arvind Sankar 2019-05-13 17:52 ` Arvind Sankar 2019-05-13 18:36 ` Mimi Zohar 2019-05-13 18:47 ` Arvind Sankar 2019-05-13 22:09 ` Mimi Zohar 2019-05-14 6:06 ` Rob Landley 2019-05-14 14:44 ` Arvind Sankar 2019-05-14 6:06 ` Rob Landley 2019-05-14 11:52 ` Roberto Sassu 2019-05-14 15:12 ` Rob Landley 2019-05-14 15:27 ` Arvind Sankar 2019-05-14 15:57 ` Arvind Sankar 2019-05-14 17:44 ` Roberto Sassu 2019-05-15 1:00 ` Arvind Sankar 2019-05-14 15:19 ` Andy Lutomirski 2019-05-14 16:33 ` Roberto Sassu 2019-05-14 16:58 ` Greg KH 2019-05-14 17:20 ` Roberto Sassu 2019-05-15 0:25 ` Arvind Sankar 2019-05-14 19:18 ` James Bottomley 2019-05-14 23:39 ` Rob Landley 2019-05-14 23:54 ` James Bottomley 2019-05-15 0:52 ` Arvind Sankar [this message] 2019-05-15 11:19 ` Roberto Sassu 2019-05-15 16:08 ` Arvind Sankar 2019-05-15 17:06 ` Roberto Sassu 2019-05-16 5:29 ` Arvind Sankar 2019-05-16 11:42 ` Roberto Sassu 2019-05-16 13:31 ` Mimi Zohar
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190515005221.GB88615@rani.riverdale.lan \ --firstname.lastname@example.org \ --cc=James.Bottomley@HansenPartnership.com \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Linux-Integrity Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/linux-integrity/0 linux-integrity/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 linux-integrity linux-integrity/ https://lore.kernel.org/linux-integrity \ email@example.com public-inbox-index linux-integrity Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-integrity AGPL code for this site: git clone https://public-inbox.org/public-inbox.git