iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Will Deacon <will@kernel.org>
To: Jordan Crouse <jcrouse@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	iommu@lists.linux-foundation.org, robin.murphy@arm.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v6 2/5] iommu/arm-smmu: Add support for TTBR1
Date: Mon, 18 May 2020 15:59:59 +0100	[thread overview]
Message-ID: <20200518145959.GK32394@willie-the-truck> (raw)
In-Reply-To: <20200409233350.6343-3-jcrouse@codeaurora.org>

On Thu, Apr 09, 2020 at 05:33:47PM -0600, Jordan Crouse wrote:
> Add support to enable TTBR1 if the domain requests it via the
> DOMAIN_ATTR_SPLIT_TABLES attribute. If enabled by the hardware
> and pagetable configuration the driver will configure the TTBR1 region
> and program the domain pagetable on TTBR1. TTBR0 will be disabled.
> 
> After attaching the device the value of he domain attribute can
> be queried to see if the split pagetables were successfully programmed.
> The domain geometry will be updated as well so that the caller can
> determine the active region for the pagetable that was programmed.
> 
> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
> ---
> 
>  drivers/iommu/arm-smmu.c | 48 ++++++++++++++++++++++++++++++++++------
>  drivers/iommu/arm-smmu.h | 24 +++++++++++++++-----
>  2 files changed, 59 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> index a6a5796e9c41..db6d503c1673 100644
> --- a/drivers/iommu/arm-smmu.c
> +++ b/drivers/iommu/arm-smmu.c
> @@ -555,11 +555,16 @@ static void arm_smmu_init_context_bank(struct arm_smmu_domain *smmu_domain,
>  			cb->ttbr[0] = pgtbl_cfg->arm_v7s_cfg.ttbr;
>  			cb->ttbr[1] = 0;
>  		} else {
> -			cb->ttbr[0] = pgtbl_cfg->arm_lpae_s1_cfg.ttbr;
> -			cb->ttbr[0] |= FIELD_PREP(ARM_SMMU_TTBRn_ASID,
> -						  cfg->asid);
> -			cb->ttbr[1] = FIELD_PREP(ARM_SMMU_TTBRn_ASID,
> -						 cfg->asid);
> +			cb->ttbr[0] = FIELD_PREP(ARM_SMMU_TTBRn_ASID,
> +				cfg->asid);
> +
> +			if (pgtbl_cfg->quirks & IO_PGTABLE_QUIRK_ARM_TTBR1) {
> +				cb->ttbr[1] = pgtbl_cfg->arm_lpae_s1_cfg.ttbr;
> +			} else {
> +				cb->ttbr[0] |= pgtbl_cfg->arm_lpae_s1_cfg.ttbr;
> +				cb->ttbr[1] = FIELD_PREP(ARM_SMMU_TTBRn_ASID,
> +							 cfg->asid);
> +			}

This looks odd to me. As I mentioned before, the SMMU driver absolutely has
to manage the ASID space, so we should be setting it in both TTBRs here.

> diff --git a/drivers/iommu/arm-smmu.h b/drivers/iommu/arm-smmu.h
> index 8d1cd54d82a6..5f6d0af7c8c8 100644
> --- a/drivers/iommu/arm-smmu.h
> +++ b/drivers/iommu/arm-smmu.h
> @@ -172,6 +172,7 @@ enum arm_smmu_cbar_type {
>  #define ARM_SMMU_TCR_SH0		GENMASK(13, 12)
>  #define ARM_SMMU_TCR_ORGN0		GENMASK(11, 10)
>  #define ARM_SMMU_TCR_IRGN0		GENMASK(9, 8)
> +#define ARM_SMMU_TCR_EPD0		BIT(7)
>  #define ARM_SMMU_TCR_T0SZ		GENMASK(5, 0)
>  
>  #define ARM_SMMU_VTCR_RES1		BIT(31)
> @@ -343,16 +344,27 @@ struct arm_smmu_domain {
>  	struct mutex			init_mutex; /* Protects smmu pointer */
>  	spinlock_t			cb_lock; /* Serialises ATS1* ops and TLB syncs */
>  	struct iommu_domain		domain;
> +	bool				split_pagetables;
>  };
>  
>  static inline u32 arm_smmu_lpae_tcr(struct io_pgtable_cfg *cfg)
>  {
> -	return ARM_SMMU_TCR_EPD1 |
> -	       FIELD_PREP(ARM_SMMU_TCR_TG0, cfg->arm_lpae_s1_cfg.tcr.tg) |
> -	       FIELD_PREP(ARM_SMMU_TCR_SH0, cfg->arm_lpae_s1_cfg.tcr.sh) |
> -	       FIELD_PREP(ARM_SMMU_TCR_ORGN0, cfg->arm_lpae_s1_cfg.tcr.orgn) |
> -	       FIELD_PREP(ARM_SMMU_TCR_IRGN0, cfg->arm_lpae_s1_cfg.tcr.irgn) |
> -	       FIELD_PREP(ARM_SMMU_TCR_T0SZ, cfg->arm_lpae_s1_cfg.tcr.tsz);
> +	u32 tcr = FIELD_PREP(ARM_SMMU_TCR_TG0, cfg->arm_lpae_s1_cfg.tcr.tg) |
> +		FIELD_PREP(ARM_SMMU_TCR_SH0, cfg->arm_lpae_s1_cfg.tcr.sh) |
> +		FIELD_PREP(ARM_SMMU_TCR_ORGN0, cfg->arm_lpae_s1_cfg.tcr.orgn) |
> +		FIELD_PREP(ARM_SMMU_TCR_IRGN0, cfg->arm_lpae_s1_cfg.tcr.irgn) |
> +		FIELD_PREP(ARM_SMMU_TCR_T0SZ, cfg->arm_lpae_s1_cfg.tcr.tsz);
> +
> +       /*
> +	* When TTBR1 is selected shift the TCR fields by 16 bits and disable
> +	* translation in TTBR0
> +	*/
> +	if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_TTBR1)
> +		tcr = (tcr << 16) | ARM_SMMU_TCR_EPD0;

This looks reasonably dodgy to me, as you copy a RESERVED bit into the A1
field. Furthermore, for 32-bit context banks you've got the EAE bit to
contend with as well.

Perhaps we shouldn't expose DOMAIN_ATTR_SPLIT_TABLES for anything other than
the 64-bit page table format.

Will
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  reply	other threads:[~2020-05-18 15:00 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-09 23:33 [PATCH v6 0/5] iommu/arm-smmu: Split pagetable support for arm-smmu-v2 Jordan Crouse
2020-04-09 23:33 ` [PATCH v6 1/5] iommu: Add DOMAIN_ATTR_SPLIT_TABLES Jordan Crouse
2020-04-09 23:33 ` [PATCH v6 2/5] iommu/arm-smmu: Add support for TTBR1 Jordan Crouse
2020-05-18 14:59   ` Will Deacon [this message]
2020-05-20  1:53     ` Jordan Crouse
2020-05-20 12:29       ` Will Deacon
2020-04-09 23:33 ` [PATCH v6 3/5] drm/msm: Attach the IOMMU device during initialization Jordan Crouse
2020-04-09 23:33 ` [PATCH v6 4/5] drm/msm: Refactor address space initialization Jordan Crouse
2020-06-17 20:16   ` Eric Anholt
2020-06-17 20:37     ` Eric Anholt
2020-04-09 23:33 ` [PATCH v6 5/5] drm/msm/a6xx: Support split pagetables Jordan Crouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200518145959.GK32394@willie-the-truck \
    --to=will@kernel.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jcrouse@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robin.murphy@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).