From: Chao Hao <chao.hao@mediatek.com>
To: Joerg Roedel <joro@8bytes.org>, Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: devicetree@vger.kernel.org, FY Yang <fy.yang@mediatek.com>,
wsd_upstream@mediatek.com, linux-kernel@vger.kernel.org,
Chao Hao <chao.hao@mediatek.com>,
iommu@lists.linux-foundation.org,
linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data
Date: Wed, 17 Jun 2020 11:00:26 +0800 [thread overview]
Message-ID: <20200617030029.4082-5-chao.hao@mediatek.com> (raw)
In-Reply-To: <20200617030029.4082-1-chao.hao@mediatek.com>
For mt6779, MMU_INV_SEL register's offset is changed from
0x38 to 0x2c, so we can put inv_sel_reg in the plat_data to
use it.
In addition, we renamed it to REG_MMU_INV_SEL_GEN1 and use it
before mt6779.
Change since v3:
1. Fix coding style
Cc: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
---
drivers/iommu/mtk_iommu.c | 19 +++++++++++--------
drivers/iommu/mtk_iommu.h | 1 +
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 239d2cdbbc9f..f23919feba4e 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -37,7 +37,7 @@
#define REG_MMU_INVLD_START_A 0x024
#define REG_MMU_INVLD_END_A 0x028
-#define REG_MMU_INV_SEL 0x038
+#define REG_MMU_INV_SEL_GEN1 0x038
#define F_INVLD_EN0 BIT(0)
#define F_INVLD_EN1 BIT(1)
@@ -168,7 +168,7 @@ static void mtk_iommu_tlb_flush_all(void *cookie)
for_each_m4u(data) {
writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
- data->base + REG_MMU_INV_SEL);
+ data->base + data->plat_data->inv_sel_reg);
writel_relaxed(F_ALL_INVLD, data->base + REG_MMU_INVALIDATE);
wmb(); /* Make sure the tlb flush all done */
}
@@ -185,7 +185,7 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
for_each_m4u(data) {
spin_lock_irqsave(&data->tlb_lock, flags);
writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
- data->base + REG_MMU_INV_SEL);
+ data->base + data->plat_data->inv_sel_reg);
writel_relaxed(iova, data->base + REG_MMU_INVLD_START_A);
writel_relaxed(iova + size - 1,
@@ -773,11 +773,12 @@ static const struct dev_pm_ops mtk_iommu_pm_ops = {
};
static const struct mtk_iommu_plat_data mt2712_data = {
- .m4u_plat = M4U_MT2712,
- .has_4gb_mode = true,
- .has_bclk = true,
- .has_vld_pa_rng = true,
- .larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
+ .m4u_plat = M4U_MT2712,
+ .has_4gb_mode = true,
+ .has_bclk = true,
+ .has_vld_pa_rng = true,
+ .inv_sel_reg = REG_MMU_INV_SEL_GEN1,
+ .larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
};
static const struct mtk_iommu_plat_data mt8173_data = {
@@ -785,12 +786,14 @@ static const struct mtk_iommu_plat_data mt8173_data = {
.has_4gb_mode = true,
.has_bclk = true,
.reset_axi = true,
+ .inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
};
static const struct mtk_iommu_plat_data mt8183_data = {
.m4u_plat = M4U_MT8183,
.reset_axi = true,
+ .inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
};
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index d711ac630037..afd7a2de5c1e 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -43,6 +43,7 @@ struct mtk_iommu_plat_data {
bool has_misc_ctrl;
bool has_vld_pa_rng;
bool reset_axi;
+ u32 inv_sel_reg;
unsigned char larbid_remap[MTK_LARB_NR_MAX];
};
--
2.18.0
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
next prev parent reply other threads:[~2020-06-17 3:01 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-17 3:00 [PATCH v4 00/07] MT6779 IOMMU SUPPORT Chao Hao
2020-06-17 3:00 ` [PATCH v4 1/7] dt-bindings: mediatek: Add bindings for MT6779 Chao Hao
2020-06-17 3:00 ` [PATCH v4 2/7] iommu/mediatek: Rename the register STANDARD_AXI_MODE(0x48) to MISC_CTRL Chao Hao
2020-06-17 9:04 ` Matthias Brugger
2020-06-17 3:00 ` [PATCH v4 3/7] iommu/mediatek: Set MISC_CTRL register Chao Hao
2020-06-17 9:34 ` Matthias Brugger
2020-06-18 11:49 ` chao hao
2020-06-20 2:03 ` Yong Wu
2020-06-24 6:39 ` chao hao
2020-06-17 3:00 ` Chao Hao [this message]
2020-06-17 9:09 ` [PATCH v4 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data Matthias Brugger
2020-06-17 3:00 ` [PATCH v4 5/7] iommu/mediatek: Add sub_comm id in translation fault Chao Hao
2020-06-17 9:17 ` Matthias Brugger
2020-06-17 11:11 ` Yong Wu
2020-06-18 11:44 ` chao hao
2020-06-17 3:00 ` [PATCH v4 6/7] iommu/mediatek: Add REG_MMU_WR_LEN definition preparing for mt6779 Chao Hao
2020-06-17 9:22 ` Matthias Brugger
2020-06-19 10:56 ` chao hao
2020-06-21 11:01 ` Matthias Brugger
2020-06-24 6:36 ` chao hao
2020-06-17 3:00 ` [PATCH v4 7/7] iommu/mediatek: Add mt6779 basic support Chao Hao
2020-06-17 9:33 ` Matthias Brugger
2020-06-18 11:54 ` chao hao
2020-06-18 16:00 ` Matthias Brugger
2020-06-19 10:50 ` chao hao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200617030029.4082-5-chao.hao@mediatek.com \
--to=chao.hao@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=fy.yang@mediatek.com \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=wsd_upstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).