[PATCH] iommu: check for the deferred attach when attaching a device

[PATCH] iommu: check for the deferred attach when attaching a device

[Lianbo Jiang]

Currently, because domain attach allows to be deferred from iommu
driver to device driver, and when iommu initializes, the devices
on the bus will be scanned and the default groups will be allocated.

Due to the above changes, some devices could be added to the same
group as below:

[    3.859417] pci 0000:01:00.0: Adding to iommu group 16
[    3.864572] pci 0000:01:00.1: Adding to iommu group 16
[    3.869738] pci 0000:02:00.0: Adding to iommu group 17
[    3.874892] pci 0000:02:00.1: Adding to iommu group 17

But when attaching these devices, it doesn't allow that a group has
more than one device, otherwise it will return an error. This conflicts
with the deferred attaching. Unfortunately, it has two devices in the
same group for my side, for example:

[    9.627014] iommu_group_device_count(): device name[0]:0000:01:00.0
[    9.633545] iommu_group_device_count(): device name[1]:0000:01:00.1
...
[   10.255609] iommu_group_device_count(): device name[0]:0000:02:00.0
[   10.262144] iommu_group_device_count(): device name[1]:0000:02:00.1

Finally, which caused the failure of tg3 driver when tg3 driver calls
the dma_alloc_coherent() to allocate coherent memory in the tg3_test_dma().

[    9.660310] tg3 0000:01:00.0: DMA engine test failed, aborting
[    9.754085] tg3: probe of 0000:01:00.0 failed with error -12
[    9.997512] tg3 0000:01:00.1: DMA engine test failed, aborting
[   10.043053] tg3: probe of 0000:01:00.1 failed with error -12
[   10.288905] tg3 0000:02:00.0: DMA engine test failed, aborting
[   10.334070] tg3: probe of 0000:02:00.0 failed with error -12
[   10.578303] tg3 0000:02:00.1: DMA engine test failed, aborting
[   10.622629] tg3: probe of 0000:02:00.1 failed with error -12

In addition, the similar situations also occur in other drivers such
as the bnxt_en driver. That can be reproduced easily in kdump kernel
when SME is active.

Add a check for the deferred attach in the iommu_attach_device() and
allow to attach the deferred device regardless of how many devices
are in a group.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
---
 drivers/iommu/iommu.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index ffeebda8d6de..dccab7b133fb 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -1967,8 +1967,11 @@ int iommu_attach_device(struct iommu_domain *domain, struct device *dev)
 	 */
 	mutex_lock(&group->mutex);
 	ret = -EINVAL;
-	if (iommu_group_device_count(group) != 1)
+	if (!iommu_is_attach_deferred(domain, dev) &&
+	    iommu_group_device_count(group) != 1) {
+		dev_err_ratelimited(dev, "Group has more than one device\n");
 		goto out_unlock;
+	}
 
 	ret = __iommu_attach_group(domain, group);
 
-- 
2.17.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu: check for the deferred attach when attaching a device

[lijiang]

Hi,

Also add Joerg to cc list.

Thanks.
Lianbo
在 2020年12月26日 13:39, Lianbo Jiang 写道:
> Currently, because domain attach allows to be deferred from iommu
> driver to device driver, and when iommu initializes, the devices
> on the bus will be scanned and the default groups will be allocated.
> 
> Due to the above changes, some devices could be added to the same
> group as below:
> 
> [    3.859417] pci 0000:01:00.0: Adding to iommu group 16
> [    3.864572] pci 0000:01:00.1: Adding to iommu group 16
> [    3.869738] pci 0000:02:00.0: Adding to iommu group 17
> [    3.874892] pci 0000:02:00.1: Adding to iommu group 17
> 
> But when attaching these devices, it doesn't allow that a group has
> more than one device, otherwise it will return an error. This conflicts
> with the deferred attaching. Unfortunately, it has two devices in the
> same group for my side, for example:
> 
> [    9.627014] iommu_group_device_count(): device name[0]:0000:01:00.0
> [    9.633545] iommu_group_device_count(): device name[1]:0000:01:00.1
> ...
> [   10.255609] iommu_group_device_count(): device name[0]:0000:02:00.0
> [   10.262144] iommu_group_device_count(): device name[1]:0000:02:00.1
> 
> Finally, which caused the failure of tg3 driver when tg3 driver calls
> the dma_alloc_coherent() to allocate coherent memory in the tg3_test_dma().
> 
> [    9.660310] tg3 0000:01:00.0: DMA engine test failed, aborting
> [    9.754085] tg3: probe of 0000:01:00.0 failed with error -12
> [    9.997512] tg3 0000:01:00.1: DMA engine test failed, aborting
> [   10.043053] tg3: probe of 0000:01:00.1 failed with error -12
> [   10.288905] tg3 0000:02:00.0: DMA engine test failed, aborting
> [   10.334070] tg3: probe of 0000:02:00.0 failed with error -12
> [   10.578303] tg3 0000:02:00.1: DMA engine test failed, aborting
> [   10.622629] tg3: probe of 0000:02:00.1 failed with error -12
> 
> In addition, the similar situations also occur in other drivers such
> as the bnxt_en driver. That can be reproduced easily in kdump kernel
> when SME is active.
> 
> Add a check for the deferred attach in the iommu_attach_device() and
> allow to attach the deferred device regardless of how many devices
> are in a group.
> 
> Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
> ---
>  drivers/iommu/iommu.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> index ffeebda8d6de..dccab7b133fb 100644
> --- a/drivers/iommu/iommu.c
> +++ b/drivers/iommu/iommu.c
> @@ -1967,8 +1967,11 @@ int iommu_attach_device(struct iommu_domain *domain, struct device *dev)
>  	 */
>  	mutex_lock(&group->mutex);
>  	ret = -EINVAL;
> -	if (iommu_group_device_count(group) != 1)
> +	if (!iommu_is_attach_deferred(domain, dev) &&
> +	    iommu_group_device_count(group) != 1) {
> +		dev_err_ratelimited(dev, "Group has more than one device\n");
>  		goto out_unlock;
> +	}
>  
>  	ret = __iommu_attach_group(domain, group);
>  
> 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu: check for the deferred attach when attaching a device

[lijiang]

在 2021年01月05日 11:55, lijiang 写道:
> Hi,
> 
> Also add Joerg to cc list.
> 

Also add more people to cc list, Jerry Snitselaar and Tom Lendacky.

Thanks.

> Thanks.
> Lianbo
> 在 2020年12月26日 13:39, Lianbo Jiang 写道:
>> Currently, because domain attach allows to be deferred from iommu
>> driver to device driver, and when iommu initializes, the devices
>> on the bus will be scanned and the default groups will be allocated.
>>
>> Due to the above changes, some devices could be added to the same
>> group as below:
>>
>> [    3.859417] pci 0000:01:00.0: Adding to iommu group 16
>> [    3.864572] pci 0000:01:00.1: Adding to iommu group 16
>> [    3.869738] pci 0000:02:00.0: Adding to iommu group 17
>> [    3.874892] pci 0000:02:00.1: Adding to iommu group 17
>>
>> But when attaching these devices, it doesn't allow that a group has
>> more than one device, otherwise it will return an error. This conflicts
>> with the deferred attaching. Unfortunately, it has two devices in the
>> same group for my side, for example:
>>
>> [    9.627014] iommu_group_device_count(): device name[0]:0000:01:00.0
>> [    9.633545] iommu_group_device_count(): device name[1]:0000:01:00.1
>> ...
>> [   10.255609] iommu_group_device_count(): device name[0]:0000:02:00.0
>> [   10.262144] iommu_group_device_count(): device name[1]:0000:02:00.1
>>
>> Finally, which caused the failure of tg3 driver when tg3 driver calls
>> the dma_alloc_coherent() to allocate coherent memory in the tg3_test_dma().
>>
>> [    9.660310] tg3 0000:01:00.0: DMA engine test failed, aborting
>> [    9.754085] tg3: probe of 0000:01:00.0 failed with error -12
>> [    9.997512] tg3 0000:01:00.1: DMA engine test failed, aborting
>> [   10.043053] tg3: probe of 0000:01:00.1 failed with error -12
>> [   10.288905] tg3 0000:02:00.0: DMA engine test failed, aborting
>> [   10.334070] tg3: probe of 0000:02:00.0 failed with error -12
>> [   10.578303] tg3 0000:02:00.1: DMA engine test failed, aborting
>> [   10.622629] tg3: probe of 0000:02:00.1 failed with error -12
>>
>> In addition, the similar situations also occur in other drivers such
>> as the bnxt_en driver. That can be reproduced easily in kdump kernel
>> when SME is active.
>>
>> Add a check for the deferred attach in the iommu_attach_device() and
>> allow to attach the deferred device regardless of how many devices
>> are in a group.
>>
>> Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
>> ---
>>  drivers/iommu/iommu.c | 5 ++++-
>>  1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>> index ffeebda8d6de..dccab7b133fb 100644
>> --- a/drivers/iommu/iommu.c
>> +++ b/drivers/iommu/iommu.c
>> @@ -1967,8 +1967,11 @@ int iommu_attach_device(struct iommu_domain *domain, struct device *dev)
>>  	 */
>>  	mutex_lock(&group->mutex);
>>  	ret = -EINVAL;
>> -	if (iommu_group_device_count(group) != 1)
>> +	if (!iommu_is_attach_deferred(domain, dev) &&
>> +	    iommu_group_device_count(group) != 1) {
>> +		dev_err_ratelimited(dev, "Group has more than one device\n");
>>  		goto out_unlock;
>> +	}
>>  
>>  	ret = __iommu_attach_group(domain, group);
>>  
>>

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu: check for the deferred attach when attaching a device

[Robin Murphy]

On 2021-01-05 07:52, lijiang wrote:
> 在 2021年01月05日 11:55, lijiang 写道:
>> Hi,
>>
>> Also add Joerg to cc list.
>>
> 
> Also add more people to cc list, Jerry Snitselaar and Tom Lendacky.
> 
> Thanks.
> 
>> Thanks.
>> Lianbo
>> 在 2020年12月26日 13:39, Lianbo Jiang 写道:
>>> Currently, because domain attach allows to be deferred from iommu
>>> driver to device driver, and when iommu initializes, the devices
>>> on the bus will be scanned and the default groups will be allocated.
>>>
>>> Due to the above changes, some devices could be added to the same
>>> group as below:
>>>
>>> [    3.859417] pci 0000:01:00.0: Adding to iommu group 16
>>> [    3.864572] pci 0000:01:00.1: Adding to iommu group 16
>>> [    3.869738] pci 0000:02:00.0: Adding to iommu group 17
>>> [    3.874892] pci 0000:02:00.1: Adding to iommu group 17
>>>
>>> But when attaching these devices, it doesn't allow that a group has
>>> more than one device, otherwise it will return an error. This conflicts
>>> with the deferred attaching. Unfortunately, it has two devices in the
>>> same group for my side, for example:
>>>
>>> [    9.627014] iommu_group_device_count(): device name[0]:0000:01:00.0
>>> [    9.633545] iommu_group_device_count(): device name[1]:0000:01:00.1
>>> ...
>>> [   10.255609] iommu_group_device_count(): device name[0]:0000:02:00.0
>>> [   10.262144] iommu_group_device_count(): device name[1]:0000:02:00.1
>>>
>>> Finally, which caused the failure of tg3 driver when tg3 driver calls
>>> the dma_alloc_coherent() to allocate coherent memory in the tg3_test_dma().
>>>
>>> [    9.660310] tg3 0000:01:00.0: DMA engine test failed, aborting
>>> [    9.754085] tg3: probe of 0000:01:00.0 failed with error -12
>>> [    9.997512] tg3 0000:01:00.1: DMA engine test failed, aborting
>>> [   10.043053] tg3: probe of 0000:01:00.1 failed with error -12
>>> [   10.288905] tg3 0000:02:00.0: DMA engine test failed, aborting
>>> [   10.334070] tg3: probe of 0000:02:00.0 failed with error -12
>>> [   10.578303] tg3 0000:02:00.1: DMA engine test failed, aborting
>>> [   10.622629] tg3: probe of 0000:02:00.1 failed with error -12
>>>
>>> In addition, the similar situations also occur in other drivers such
>>> as the bnxt_en driver. That can be reproduced easily in kdump kernel
>>> when SME is active.
>>>
>>> Add a check for the deferred attach in the iommu_attach_device() and
>>> allow to attach the deferred device regardless of how many devices
>>> are in a group.

Is this iommu_attach_device() call is coming from iommu-dma? (if not, 
then whoever's calling it probably shouldn't be)

Assuming so, then probably what should happen is to move the handling 
currently in iommu_dma_deferred_attach() into the core so that it can 
call __iommu_attach_device() directly - the intent is just to replay 
that exact call skipped in iommu_group_add_device(), so the legacy 
external iommu_attach_device() interface isn't really the right tool for 
the job anyway. That's just slightly awkward since ideally it wants to 
be done in a way that doesn't result in a redundant out-of-line call for 
!kdump.

Alternatively I suppose it *could* just call ops->attach_dev directly, 
but then we miss out on the tracepoint, and deferred attach is arguably 
one of the cases where that's most useful :/

Robin.

>>>
>>> Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
>>> ---
>>>   drivers/iommu/iommu.c | 5 ++++-
>>>   1 file changed, 4 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>>> index ffeebda8d6de..dccab7b133fb 100644
>>> --- a/drivers/iommu/iommu.c
>>> +++ b/drivers/iommu/iommu.c
>>> @@ -1967,8 +1967,11 @@ int iommu_attach_device(struct iommu_domain *domain, struct device *dev)
>>>   	 */
>>>   	mutex_lock(&group->mutex);
>>>   	ret = -EINVAL;
>>> -	if (iommu_group_device_count(group) != 1)
>>> +	if (!iommu_is_attach_deferred(domain, dev) &&
>>> +	    iommu_group_device_count(group) != 1) {
>>> +		dev_err_ratelimited(dev, "Group has more than one device\n");
>>>   		goto out_unlock;
>>> +	}
>>>   
>>>   	ret = __iommu_attach_group(domain, group);
>>>   
>>>
> 
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu: check for the deferred attach when attaching a device

[lijiang]

Hi, Robin

Thank you for the comment.

在 2021年01月13日 01:29, Robin Murphy 写道:
> On 2021-01-05 07:52, lijiang wrote:
>> 在 2021年01月05日 11:55, lijiang 写道:
>>> Hi,
>>>
>>> Also add Joerg to cc list.
>>>
>>
>> Also add more people to cc list, Jerry Snitselaar and Tom Lendacky.
>>
>> Thanks.
>>
>>> Thanks.
>>> Lianbo
>>> 在 2020年12月26日 13:39, Lianbo Jiang 写道:
>>>> Currently, because domain attach allows to be deferred from iommu
>>>> driver to device driver, and when iommu initializes, the devices
>>>> on the bus will be scanned and the default groups will be allocated.
>>>>
>>>> Due to the above changes, some devices could be added to the same
>>>> group as below:
>>>>
>>>> [    3.859417] pci 0000:01:00.0: Adding to iommu group 16
>>>> [    3.864572] pci 0000:01:00.1: Adding to iommu group 16
>>>> [    3.869738] pci 0000:02:00.0: Adding to iommu group 17
>>>> [    3.874892] pci 0000:02:00.1: Adding to iommu group 17
>>>>
>>>> But when attaching these devices, it doesn't allow that a group has
>>>> more than one device, otherwise it will return an error. This conflicts
>>>> with the deferred attaching. Unfortunately, it has two devices in the
>>>> same group for my side, for example:
>>>>
>>>> [    9.627014] iommu_group_device_count(): device name[0]:0000:01:00.0
>>>> [    9.633545] iommu_group_device_count(): device name[1]:0000:01:00.1
>>>> ...
>>>> [   10.255609] iommu_group_device_count(): device name[0]:0000:02:00.0
>>>> [   10.262144] iommu_group_device_count(): device name[1]:0000:02:00.1
>>>>
>>>> Finally, which caused the failure of tg3 driver when tg3 driver calls
>>>> the dma_alloc_coherent() to allocate coherent memory in the tg3_test_dma().
>>>>
>>>> [    9.660310] tg3 0000:01:00.0: DMA engine test failed, aborting
>>>> [    9.754085] tg3: probe of 0000:01:00.0 failed with error -12
>>>> [    9.997512] tg3 0000:01:00.1: DMA engine test failed, aborting
>>>> [   10.043053] tg3: probe of 0000:01:00.1 failed with error -12
>>>> [   10.288905] tg3 0000:02:00.0: DMA engine test failed, aborting
>>>> [   10.334070] tg3: probe of 0000:02:00.0 failed with error -12
>>>> [   10.578303] tg3 0000:02:00.1: DMA engine test failed, aborting
>>>> [   10.622629] tg3: probe of 0000:02:00.1 failed with error -12
>>>>
>>>> In addition, the similar situations also occur in other drivers such
>>>> as the bnxt_en driver. That can be reproduced easily in kdump kernel
>>>> when SME is active.
>>>>
>>>> Add a check for the deferred attach in the iommu_attach_device() and
>>>> allow to attach the deferred device regardless of how many devices
>>>> are in a group.
> 
> Is this iommu_attach_device() call is coming from iommu-dma? (if not, then whoever's calling it probably shouldn't be)
> 

Yes, you are right, the iommu_attach_device call is coming from iommu-dma.
 
> Assuming so, then probably what should happen is to move the handling currently in iommu_dma_deferred_attach() into the core so that it can call __iommu_attach_device() directly - the intent is just to replay that exact call skipped in iommu_group_add_device(), so the legacy external iommu_attach_device() interface isn't really the right tool for the job 

Sounds good. I will check if this can work in various cases. If it's OK, I will post again.

diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index f0305e6aac1b..5e7da902ac36 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -23,7 +23,6 @@
 #include <linux/swiotlb.h>
 #include <linux/scatterlist.h>
 #include <linux/vmalloc.h>
-#include <linux/crash_dump.h>
 #include <linux/dma-direct.h>
 
 struct iommu_dma_msi_page {
@@ -378,21 +377,6 @@ static int iommu_dma_init_domain(struct iommu_domain *domain, dma_addr_t base,
 	return iova_reserve_iommu_regions(dev, domain);
 }
 
-static int iommu_dma_deferred_attach(struct device *dev,
-		struct iommu_domain *domain)
-{
-	const struct iommu_ops *ops = domain->ops;
-
-	if (!is_kdump_kernel())
-		return 0;
-
-	if (unlikely(ops->is_attach_deferred &&
-			ops->is_attach_deferred(domain, dev)))
-		return iommu_attach_device(domain, dev);
-
-	return 0;
-}
-
 /**
  * dma_info_to_prot - Translate DMA API directions and attributes to IOMMU API
  *                    page flags.
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index ffeebda8d6de..4fed1567b498 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -23,6 +23,7 @@
 #include <linux/property.h>
 #include <linux/fsl/mc.h>
 #include <linux/module.h>
+#include <linux/crash_dump.h>
 #include <trace/events/iommu.h>
 
 static struct kset *iommu_group_kset;
@@ -1952,6 +1953,21 @@ static int __iommu_attach_device(struct iommu_domain *domain,
 	return ret;
 }
 
+int iommu_dma_deferred_attach(struct device *dev,
+                struct iommu_domain *domain)
+{
+        const struct iommu_ops *ops = domain->ops;
+
+        if (!is_kdump_kernel())
+                return 0;
+
+        if (unlikely(ops->is_attach_deferred &&
+                        ops->is_attach_deferred(domain, dev)))
+                return __iommu_attach_device(domain, dev);
+
+        return 0;
+}
+
 int iommu_attach_device(struct iommu_domain *domain, struct device *dev)
 {
 	struct iommu_group *group;
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index b3f0e2018c62..8e0ee96ca456 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -424,6 +424,8 @@ extern struct iommu_group *iommu_group_get_by_id(int id);
 extern void iommu_domain_free(struct iommu_domain *domain);
 extern int iommu_attach_device(struct iommu_domain *domain,
 			       struct device *dev);
+extern int iommu_dma_deferred_attach(struct device *dev,
+                struct iommu_domain *domain);
 extern void iommu_detach_device(struct iommu_domain *domain,
 				struct device *dev);
 extern int iommu_uapi_cache_invalidate(struct iommu_domain *domain,
@@ -680,6 +682,12 @@ static inline int iommu_attach_device(struct iommu_domain *domain,
 	return -ENODEV;
 }
 
+static inline int iommu_dma_deferred_attach(struct device *dev,
+					    struct iommu_domain *domain)
+{
+	return -ENODEV;
+}
+
 static inline void iommu_detach_device(struct iommu_domain *domain,
 				       struct device *dev)
 {


> Alternatively I suppose it *could* just call ops->attach_dev directly, but then we miss out on the tracepoint, and deferred attach is arguably one of the cases where that's most useful :/
> 
Seems good, I could debug it and provide feedback.

Thanks.
Lianbo

> Robin.
> 
>>>>
>>>> Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
>>>> ---
>>>>   drivers/iommu/iommu.c | 5 ++++-
>>>>   1 file changed, 4 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>>>> index ffeebda8d6de..dccab7b133fb 100644
>>>> --- a/drivers/iommu/iommu.c
>>>> +++ b/drivers/iommu/iommu.c
>>>> @@ -1967,8 +1967,11 @@ int iommu_attach_device(struct iommu_domain *domain, struct device *dev)
>>>>        */
>>>>       mutex_lock(&group->mutex);
>>>>       ret = -EINVAL;
>>>> -    if (iommu_group_device_count(group) != 1)
>>>> +    if (!iommu_is_attach_deferred(domain, dev) &&
>>>> +        iommu_group_device_count(group) != 1) {
>>>> +        dev_err_ratelimited(dev, "Group has more than one device\n");
>>>>           goto out_unlock;
>>>> +    }
>>>>         ret = __iommu_attach_group(domain, group);
>>>>  
>>
>> _______________________________________________
>> iommu mailing list
>> iommu@lists.linux-foundation.org
>> https://lists.linuxfoundation.org/mailman/listinfo/iommu
>>
> 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu: check for the deferred attach when attaching a device

[Robin Murphy]

On 2021-01-15 14:26, lijiang wrote:
> Hi, Robin
> 
> Thank you for the comment.
> 
> 在 2021年01月13日 01:29, Robin Murphy 写道:
>> On 2021-01-05 07:52, lijiang wrote:
>>> 在 2021年01月05日 11:55, lijiang 写道:
>>>> Hi,
>>>>
>>>> Also add Joerg to cc list.
>>>>
>>>
>>> Also add more people to cc list, Jerry Snitselaar and Tom Lendacky.
>>>
>>> Thanks.
>>>
>>>> Thanks.
>>>> Lianbo
>>>> 在 2020年12月26日 13:39, Lianbo Jiang 写道:
>>>>> Currently, because domain attach allows to be deferred from iommu
>>>>> driver to device driver, and when iommu initializes, the devices
>>>>> on the bus will be scanned and the default groups will be allocated.
>>>>>
>>>>> Due to the above changes, some devices could be added to the same
>>>>> group as below:
>>>>>
>>>>> [    3.859417] pci 0000:01:00.0: Adding to iommu group 16
>>>>> [    3.864572] pci 0000:01:00.1: Adding to iommu group 16
>>>>> [    3.869738] pci 0000:02:00.0: Adding to iommu group 17
>>>>> [    3.874892] pci 0000:02:00.1: Adding to iommu group 17
>>>>>
>>>>> But when attaching these devices, it doesn't allow that a group has
>>>>> more than one device, otherwise it will return an error. This conflicts
>>>>> with the deferred attaching. Unfortunately, it has two devices in the
>>>>> same group for my side, for example:
>>>>>
>>>>> [    9.627014] iommu_group_device_count(): device name[0]:0000:01:00.0
>>>>> [    9.633545] iommu_group_device_count(): device name[1]:0000:01:00.1
>>>>> ...
>>>>> [   10.255609] iommu_group_device_count(): device name[0]:0000:02:00.0
>>>>> [   10.262144] iommu_group_device_count(): device name[1]:0000:02:00.1
>>>>>
>>>>> Finally, which caused the failure of tg3 driver when tg3 driver calls
>>>>> the dma_alloc_coherent() to allocate coherent memory in the tg3_test_dma().
>>>>>
>>>>> [    9.660310] tg3 0000:01:00.0: DMA engine test failed, aborting
>>>>> [    9.754085] tg3: probe of 0000:01:00.0 failed with error -12
>>>>> [    9.997512] tg3 0000:01:00.1: DMA engine test failed, aborting
>>>>> [   10.043053] tg3: probe of 0000:01:00.1 failed with error -12
>>>>> [   10.288905] tg3 0000:02:00.0: DMA engine test failed, aborting
>>>>> [   10.334070] tg3: probe of 0000:02:00.0 failed with error -12
>>>>> [   10.578303] tg3 0000:02:00.1: DMA engine test failed, aborting
>>>>> [   10.622629] tg3: probe of 0000:02:00.1 failed with error -12
>>>>>
>>>>> In addition, the similar situations also occur in other drivers such
>>>>> as the bnxt_en driver. That can be reproduced easily in kdump kernel
>>>>> when SME is active.
>>>>>
>>>>> Add a check for the deferred attach in the iommu_attach_device() and
>>>>> allow to attach the deferred device regardless of how many devices
>>>>> are in a group.
>>
>> Is this iommu_attach_device() call is coming from iommu-dma? (if not, then whoever's calling it probably shouldn't be)
>>
> 
> Yes, you are right, the iommu_attach_device call is coming from iommu-dma.
>   
>> Assuming so, then probably what should happen is to move the handling currently in iommu_dma_deferred_attach() into the core so that it can call __iommu_attach_device() directly - the intent is just to replay that exact call skipped in iommu_group_add_device(), so the legacy external iommu_attach_device() interface isn't really the right tool for the job
> 
> Sounds good. I will check if this can work in various cases. If it's OK, I will post again.
> 
> diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
> index f0305e6aac1b..5e7da902ac36 100644
> --- a/drivers/iommu/dma-iommu.c
> +++ b/drivers/iommu/dma-iommu.c
> @@ -23,7 +23,6 @@
>   #include <linux/swiotlb.h>
>   #include <linux/scatterlist.h>
>   #include <linux/vmalloc.h>
> -#include <linux/crash_dump.h>
>   #include <linux/dma-direct.h>
>   
>   struct iommu_dma_msi_page {
> @@ -378,21 +377,6 @@ static int iommu_dma_init_domain(struct iommu_domain *domain, dma_addr_t base,
>   	return iova_reserve_iommu_regions(dev, domain);
>   }
>   
> -static int iommu_dma_deferred_attach(struct device *dev,
> -		struct iommu_domain *domain)
> -{
> -	const struct iommu_ops *ops = domain->ops;
> -
> -	if (!is_kdump_kernel())
> -		return 0;
> -
> -	if (unlikely(ops->is_attach_deferred &&
> -			ops->is_attach_deferred(domain, dev)))
> -		return iommu_attach_device(domain, dev);
> -
> -	return 0;
> -}
> -
>   /**
>    * dma_info_to_prot - Translate DMA API directions and attributes to IOMMU API
>    *                    page flags.
> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> index ffeebda8d6de..4fed1567b498 100644
> --- a/drivers/iommu/iommu.c
> +++ b/drivers/iommu/iommu.c
> @@ -23,6 +23,7 @@
>   #include <linux/property.h>
>   #include <linux/fsl/mc.h>
>   #include <linux/module.h>
> +#include <linux/crash_dump.h>
>   #include <trace/events/iommu.h>
>   
>   static struct kset *iommu_group_kset;
> @@ -1952,6 +1953,21 @@ static int __iommu_attach_device(struct iommu_domain *domain,
>   	return ret;
>   }
>   
> +int iommu_dma_deferred_attach(struct device *dev,
> +                struct iommu_domain *domain)
> +{
> +        const struct iommu_ops *ops = domain->ops;
> +
> +        if (!is_kdump_kernel())
> +                return 0;
> +
> +        if (unlikely(ops->is_attach_deferred &&
> +                        ops->is_attach_deferred(domain, dev)))
> +                return __iommu_attach_device(domain, dev);
> +
> +        return 0;
> +}
> +
>   int iommu_attach_device(struct iommu_domain *domain, struct device *dev)
>   {
>   	struct iommu_group *group;
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index b3f0e2018c62..8e0ee96ca456 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -424,6 +424,8 @@ extern struct iommu_group *iommu_group_get_by_id(int id);
>   extern void iommu_domain_free(struct iommu_domain *domain);
>   extern int iommu_attach_device(struct iommu_domain *domain,
>   			       struct device *dev);
> +extern int iommu_dma_deferred_attach(struct device *dev,
> +                struct iommu_domain *domain);
>   extern void iommu_detach_device(struct iommu_domain *domain,
>   				struct device *dev);
>   extern int iommu_uapi_cache_invalidate(struct iommu_domain *domain,
> @@ -680,6 +682,12 @@ static inline int iommu_attach_device(struct iommu_domain *domain,
>   	return -ENODEV;
>   }
>   
> +static inline int iommu_dma_deferred_attach(struct device *dev,
> +					    struct iommu_domain *domain)
> +{
> +	return -ENODEV;
> +}
> +
>   static inline void iommu_detach_device(struct iommu_domain *domain,
>   				       struct device *dev)
>   {

Yeah, that's more or less what I had in mind (FWIW I don't think we need 
the stub definition since this should only ever be called by other 
IOMMU-API-dependent code). However I'd really like to minimise the 
fast-path impact to the normal case, so how about throwing something 
like this into the mix as well? (where iommu_do_deferred_attach() 
represents what you have above minus the move of the kdump check)

Cheers,
Robin.

----->8-----
diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index 4078358ed66e..638222558248 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -51,6 +51,8 @@ struct iommu_dma_cookie {
  	struct iommu_domain		*fq_domain;
  };

+DEFINE_STATIC_KEY_FALSE(deferred_attach);
+
  void iommu_dma_free_cpu_cached_iovas(unsigned int cpu,
  		struct iommu_domain *domain)
  {
@@ -378,21 +380,6 @@ static int iommu_dma_init_domain(struct 
iommu_domain *domain, dma_addr_t base,
  	return iova_reserve_iommu_regions(dev, domain);
  }

-static int iommu_dma_deferred_attach(struct device *dev,
-		struct iommu_domain *domain)
-{
-	const struct iommu_ops *ops = domain->ops;
-
-	if (!is_kdump_kernel())
-		return 0;
-
-	if (unlikely(ops->is_attach_deferred &&
-			ops->is_attach_deferred(domain, dev)))
-		return iommu_attach_device(domain, dev);
-
-	return 0;
-}
-
  /**
   * dma_info_to_prot - Translate DMA API directions and attributes to 
IOMMU API
   *                    page flags.
@@ -535,7 +522,8 @@ static dma_addr_t __iommu_dma_map(struct device 
*dev, phys_addr_t phys,
  	size_t iova_off = iova_offset(iovad, phys);
  	dma_addr_t iova;

-	if (unlikely(iommu_dma_deferred_attach(dev, domain)))
+	if (static_branch_unlikely(&deferred_attach) &&
+	    iommu_do_deferred_attach(domain, dev))
  		return DMA_MAPPING_ERROR;

  	size = iova_align(iovad, size + iova_off);
@@ -693,7 +681,8 @@ static void *iommu_dma_alloc_remap(struct device 
*dev, size_t size,

  	*dma_handle = DMA_MAPPING_ERROR;

-	if (unlikely(iommu_dma_deferred_attach(dev, domain)))
+	if (static_branch_unlikely(&deferred_attach) &&
+	    iommu_do_deferred_attach(domain, dev))
  		return NULL;

  	min_size = alloc_sizes & -alloc_sizes;
@@ -976,7 +965,8 @@ static int iommu_dma_map_sg(struct device *dev, 
struct scatterlist *sg,
  	unsigned long mask = dma_get_seg_boundary(dev);
  	int i;

-	if (unlikely(iommu_dma_deferred_attach(dev, domain)))
+	if (static_branch_unlikely(&deferred_attach) &&
+	    iommu_do_deferred_attach(domain, dev))
  		return 0;

  	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
@@ -1424,6 +1414,9 @@ void iommu_dma_compose_msi_msg(struct msi_desc *desc,

  static int iommu_dma_init(void)
  {
+	if (is_kdump_kernel())
+		static_branch_enable(&deferred_attach);
+
  	return iova_cache_get();
  }
  arch_initcall(iommu_dma_init);
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH] iommu: check for the deferred attach when attaching a device

[lijiang]

在 2021年01月15日 23:15, Robin Murphy 写道:
> On 2021-01-15 14:26, lijiang wrote:
>> Hi, Robin
>>
>> Thank you for the comment.
>>
>> 在 2021年01月13日 01:29, Robin Murphy 写道:
>>> On 2021-01-05 07:52, lijiang wrote:
>>>> 在 2021年01月05日 11:55, lijiang 写道:
>>>>> Hi,
>>>>>
>>>>> Also add Joerg to cc list.
>>>>>
>>>>
>>>> Also add more people to cc list, Jerry Snitselaar and Tom Lendacky.
>>>>
>>>> Thanks.
>>>>
>>>>> Thanks.
>>>>> Lianbo
>>>>> 在 2020年12月26日 13:39, Lianbo Jiang 写道:
>>>>>> Currently, because domain attach allows to be deferred from iommu
>>>>>> driver to device driver, and when iommu initializes, the devices
>>>>>> on the bus will be scanned and the default groups will be allocated.
>>>>>>
>>>>>> Due to the above changes, some devices could be added to the same
>>>>>> group as below:
>>>>>>
>>>>>> [    3.859417] pci 0000:01:00.0: Adding to iommu group 16
>>>>>> [    3.864572] pci 0000:01:00.1: Adding to iommu group 16
>>>>>> [    3.869738] pci 0000:02:00.0: Adding to iommu group 17
>>>>>> [    3.874892] pci 0000:02:00.1: Adding to iommu group 17
>>>>>>
>>>>>> But when attaching these devices, it doesn't allow that a group has
>>>>>> more than one device, otherwise it will return an error. This conflicts
>>>>>> with the deferred attaching. Unfortunately, it has two devices in the
>>>>>> same group for my side, for example:
>>>>>>
>>>>>> [    9.627014] iommu_group_device_count(): device name[0]:0000:01:00.0
>>>>>> [    9.633545] iommu_group_device_count(): device name[1]:0000:01:00.1
>>>>>> ...
>>>>>> [   10.255609] iommu_group_device_count(): device name[0]:0000:02:00.0
>>>>>> [   10.262144] iommu_group_device_count(): device name[1]:0000:02:00.1
>>>>>>
>>>>>> Finally, which caused the failure of tg3 driver when tg3 driver calls
>>>>>> the dma_alloc_coherent() to allocate coherent memory in the tg3_test_dma().
>>>>>>
>>>>>> [    9.660310] tg3 0000:01:00.0: DMA engine test failed, aborting
>>>>>> [    9.754085] tg3: probe of 0000:01:00.0 failed with error -12
>>>>>> [    9.997512] tg3 0000:01:00.1: DMA engine test failed, aborting
>>>>>> [   10.043053] tg3: probe of 0000:01:00.1 failed with error -12
>>>>>> [   10.288905] tg3 0000:02:00.0: DMA engine test failed, aborting
>>>>>> [   10.334070] tg3: probe of 0000:02:00.0 failed with error -12
>>>>>> [   10.578303] tg3 0000:02:00.1: DMA engine test failed, aborting
>>>>>> [   10.622629] tg3: probe of 0000:02:00.1 failed with error -12
>>>>>>
>>>>>> In addition, the similar situations also occur in other drivers such
>>>>>> as the bnxt_en driver. That can be reproduced easily in kdump kernel
>>>>>> when SME is active.
>>>>>>
>>>>>> Add a check for the deferred attach in the iommu_attach_device() and
>>>>>> allow to attach the deferred device regardless of how many devices
>>>>>> are in a group.
>>>
>>> Is this iommu_attach_device() call is coming from iommu-dma? (if not, then whoever's calling it probably shouldn't be)
>>>
>>
>> Yes, you are right, the iommu_attach_device call is coming from iommu-dma.
>>  
>>> Assuming so, then probably what should happen is to move the handling currently in iommu_dma_deferred_attach() into the core so that it can call __iommu_attach_device() directly - the intent is just to replay that exact call skipped in iommu_group_add_device(), so the legacy external iommu_attach_device() interface isn't really the right tool for the job
>>
>> Sounds good. I will check if this can work in various cases. If it's OK, I will post again.
>>
>> diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
>> index f0305e6aac1b..5e7da902ac36 100644
>> --- a/drivers/iommu/dma-iommu.c
>> +++ b/drivers/iommu/dma-iommu.c
>> @@ -23,7 +23,6 @@
>>   #include <linux/swiotlb.h>
>>   #include <linux/scatterlist.h>
>>   #include <linux/vmalloc.h>
>> -#include <linux/crash_dump.h>
>>   #include <linux/dma-direct.h>
>>     struct iommu_dma_msi_page {
>> @@ -378,21 +377,6 @@ static int iommu_dma_init_domain(struct iommu_domain *domain, dma_addr_t base,
>>       return iova_reserve_iommu_regions(dev, domain);
>>   }
>>   -static int iommu_dma_deferred_attach(struct device *dev,
>> -        struct iommu_domain *domain)
>> -{
>> -    const struct iommu_ops *ops = domain->ops;
>> -
>> -    if (!is_kdump_kernel())
>> -        return 0;
>> -
>> -    if (unlikely(ops->is_attach_deferred &&
>> -            ops->is_attach_deferred(domain, dev)))
>> -        return iommu_attach_device(domain, dev);
>> -
>> -    return 0;
>> -}
>> -
>>   /**
>>    * dma_info_to_prot - Translate DMA API directions and attributes to IOMMU API
>>    *                    page flags.
>> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>> index ffeebda8d6de..4fed1567b498 100644
>> --- a/drivers/iommu/iommu.c
>> +++ b/drivers/iommu/iommu.c
>> @@ -23,6 +23,7 @@
>>   #include <linux/property.h>
>>   #include <linux/fsl/mc.h>
>>   #include <linux/module.h>
>> +#include <linux/crash_dump.h>
>>   #include <trace/events/iommu.h>
>>     static struct kset *iommu_group_kset;
>> @@ -1952,6 +1953,21 @@ static int __iommu_attach_device(struct iommu_domain *domain,
>>       return ret;
>>   }
>>   +int iommu_dma_deferred_attach(struct device *dev,
>> +                struct iommu_domain *domain)
>> +{
>> +        const struct iommu_ops *ops = domain->ops;
>> +
>> +        if (!is_kdump_kernel())
>> +                return 0;
>> +
>> +        if (unlikely(ops->is_attach_deferred &&
>> +                        ops->is_attach_deferred(domain, dev)))
>> +                return __iommu_attach_device(domain, dev);
>> +
>> +        return 0;
>> +}
>> +
>>   int iommu_attach_device(struct iommu_domain *domain, struct device *dev)
>>   {
>>       struct iommu_group *group;
>> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
>> index b3f0e2018c62..8e0ee96ca456 100644
>> --- a/include/linux/iommu.h
>> +++ b/include/linux/iommu.h
>> @@ -424,6 +424,8 @@ extern struct iommu_group *iommu_group_get_by_id(int id);
>>   extern void iommu_domain_free(struct iommu_domain *domain);
>>   extern int iommu_attach_device(struct iommu_domain *domain,
>>                      struct device *dev);
>> +extern int iommu_dma_deferred_attach(struct device *dev,
>> +                struct iommu_domain *domain);
>>   extern void iommu_detach_device(struct iommu_domain *domain,
>>                   struct device *dev);
>>   extern int iommu_uapi_cache_invalidate(struct iommu_domain *domain,
>> @@ -680,6 +682,12 @@ static inline int iommu_attach_device(struct iommu_domain *domain,
>>       return -ENODEV;
>>   }
>>   +static inline int iommu_dma_deferred_attach(struct device *dev,
>> +                        struct iommu_domain *domain)
>> +{
>> +    return -ENODEV;
>> +}
>> +
>>   static inline void iommu_detach_device(struct iommu_domain *domain,
>>                          struct device *dev)
>>   {
> 
> Yeah, that's more or less what I had in mind (FWIW I don't think we need the stub definition since this should only ever be called by other IOMMU-API-dependent code).

Seems yes, I can remove the stub definition. I just checked the driver/iommu/Kconfig, the IOMMU_API always gets selected by default, and the IOMMU_DMA depends on IOMMU_API.

> However I'd really like to minimise the fast-path impact to the normal case, so how about throwing something like this into the mix as well? 

That's good idea although the implementation of the is_kdump_kernel() is very simple. But I could split them into two patches so that it can be
reviewed conveniently:

[1] [PATCH 1/2] dma-iommu: use static-key to minimize the impact in the fast-path

Let's move out the is_kdump_kernel() check from iommu_dma_deferred_attach()
to iommu_dma_init(), and use the static-key in the fast-path to minimize the
impact in the normal case.

[2] [PATCH 2/2] iommu: use the __iommu_attach_device() directly for 
 deffered attach

Let's move the handling currently in iommu_dma_deferred_attach() into
the iommu core code so that it can call the __iommu_attach_device()
directly instead of the iommu_attach_device(). And change the name of
iommu_dma_deferred_attach() to iommu_do_deferred_attach().


>(where iommu_do_deferred_attach() represents what you have above minus the move of the kdump check)
>
OK, understood, thanks. Would you mind adding your Signed-off-by to these patches when I post again? If you
have no objection, I will post these two changes(patches) later.


Thanks.
Lianbo
 
> Cheers,
> Robin.
> 
> ----->8-----
> diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
> index 4078358ed66e..638222558248 100644
> --- a/drivers/iommu/dma-iommu.c
> +++ b/drivers/iommu/dma-iommu.c
> @@ -51,6 +51,8 @@ struct iommu_dma_cookie {
>      struct iommu_domain        *fq_domain;
>  };
> 
> +DEFINE_STATIC_KEY_FALSE(deferred_attach);
> +
>  void iommu_dma_free_cpu_cached_iovas(unsigned int cpu,
>          struct iommu_domain *domain)
>  {
> @@ -378,21 +380,6 @@ static int iommu_dma_init_domain(struct iommu_domain *domain, dma_addr_t base,
>      return iova_reserve_iommu_regions(dev, domain);
>  }
> 
> -static int iommu_dma_deferred_attach(struct device *dev,
> -        struct iommu_domain *domain)
> -{
> -    const struct iommu_ops *ops = domain->ops;
> -
> -    if (!is_kdump_kernel())
> -        return 0;
> -
> -    if (unlikely(ops->is_attach_deferred &&
> -            ops->is_attach_deferred(domain, dev)))
> -        return iommu_attach_device(domain, dev);
> -
> -    return 0;
> -}
> -
>  /**
>   * dma_info_to_prot - Translate DMA API directions and attributes to IOMMU API
>   *                    page flags.
> @@ -535,7 +522,8 @@ static dma_addr_t __iommu_dma_map(struct device *dev, phys_addr_t phys,
>      size_t iova_off = iova_offset(iovad, phys);
>      dma_addr_t iova;
> 
> -    if (unlikely(iommu_dma_deferred_attach(dev, domain)))
> +    if (static_branch_unlikely(&deferred_attach) &&
> +        iommu_do_deferred_attach(domain, dev))
>          return DMA_MAPPING_ERROR;
> 
>      size = iova_align(iovad, size + iova_off);
> @@ -693,7 +681,8 @@ static void *iommu_dma_alloc_remap(struct device *dev, size_t size,
> 
>      *dma_handle = DMA_MAPPING_ERROR;
> 
> -    if (unlikely(iommu_dma_deferred_attach(dev, domain)))
> +    if (static_branch_unlikely(&deferred_attach) &&
> +        iommu_do_deferred_attach(domain, dev))
>          return NULL;
> 
>      min_size = alloc_sizes & -alloc_sizes;
> @@ -976,7 +965,8 @@ static int iommu_dma_map_sg(struct device *dev, struct scatterlist *sg,
>      unsigned long mask = dma_get_seg_boundary(dev);
>      int i;
> 
> -    if (unlikely(iommu_dma_deferred_attach(dev, domain)))
> +    if (static_branch_unlikely(&deferred_attach) &&
> +        iommu_do_deferred_attach(domain, dev))
>          return 0;
> 
>      if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
> @@ -1424,6 +1414,9 @@ void iommu_dma_compose_msi_msg(struct msi_desc *desc,
> 
>  static int iommu_dma_init(void)
>  {
> +    if (is_kdump_kernel())
> +        static_branch_enable(&deferred_attach);
> +
>      return iova_cache_get();
>  }
>  arch_initcall(iommu_dma_init);
> 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu