[PATCH 1/1] iommu/vt-d: Preset Access/Dirty bits for IOVA over FL

[PATCH 1/1] iommu/vt-d: Preset Access/Dirty bits for IOVA over FL

[Lu Baolu]

The Access/Dirty bits in the first level page table entry will be set
whenever a page table entry was used for address translation or write
permission was successfully translated. This is always true when using
the first-level page table for kernel IOVA. Instead of wasting hardware
cycles to update the certain bits, it's better to set them up at the
beginning.

Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/iommu/intel/iommu.c | 14 ++++++++++++--
 include/linux/intel-iommu.h |  2 ++
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 0ea2e1440a9b..54b8d1bf2009 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -1018,8 +1018,11 @@ static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
 
 			domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE);
 			pteval = ((uint64_t)virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
-			if (domain_use_first_level(domain))
+			if (domain_use_first_level(domain)) {
 				pteval |= DMA_FL_PTE_XD | DMA_FL_PTE_US;
+				if (domain->domain.type == IOMMU_DOMAIN_DMA)
+					pteval |= DMA_FL_PTE_ACCESS;
+			}
 			if (cmpxchg64(&pte->val, 0ULL, pteval))
 				/* Someone else set it while we were thinking; use theirs. */
 				free_pgtable_page(tmp_page);
@@ -2293,9 +2296,16 @@ __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
 		return -EINVAL;
 
 	attr = prot & (DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP);
-	if (domain_use_first_level(domain))
+	if (domain_use_first_level(domain)) {
 		attr |= DMA_FL_PTE_PRESENT | DMA_FL_PTE_XD | DMA_FL_PTE_US;
 
+		if (domain->domain.type == IOMMU_DOMAIN_DMA) {
+			attr |= DMA_FL_PTE_ACCESS;
+			if (prot & DMA_PTE_WRITE)
+				attr |= DMA_FL_PTE_DIRTY;
+		}
+	}
+
 	pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | attr;
 
 	while (nr_pages > 0) {
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index 65aa963cc115..832730549c52 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -42,6 +42,8 @@
 
 #define DMA_FL_PTE_PRESENT	BIT_ULL(0)
 #define DMA_FL_PTE_US		BIT_ULL(2)
+#define DMA_FL_PTE_ACCESS	BIT_ULL(5)
+#define DMA_FL_PTE_DIRTY	BIT_ULL(6)
 #define DMA_FL_PTE_XD		BIT_ULL(63)
 
 #define ADDR_WIDTH_5LEVEL	(57)
-- 
2.25.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH 1/1] iommu/vt-d: Preset Access/Dirty bits for IOVA over FL

[Joerg Roedel]

On Fri, Jan 15, 2021 at 08:42:02AM +0800, Lu Baolu wrote:
> The Access/Dirty bits in the first level page table entry will be set
> whenever a page table entry was used for address translation or write
> permission was successfully translated. This is always true when using
> the first-level page table for kernel IOVA. Instead of wasting hardware
> cycles to update the certain bits, it's better to set them up at the
> beginning.
> 
> Suggested-by: Ashok Raj <ashok.raj@intel.com>
> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
> ---
>  drivers/iommu/intel/iommu.c | 14 ++++++++++++--
>  include/linux/intel-iommu.h |  2 ++
>  2 files changed, 14 insertions(+), 2 deletions(-)

Applied, thanks.
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu