[PATCH v3] iommu/ipmmu-vmsa: Allow PCIe devices

[PATCH v3] iommu/ipmmu-vmsa: Allow PCIe devices

[Yoshihiro Shimoda]

IPMMU hardware on R-Car Gen3 and RZ/G2 is simple. Each bus-master
device like eMMC host and PCIe controllers has a micro-TLB of
The IPMMU, and after enabled it, all transactions of the device are
under the IPMMU.

 eMMC host ---(micro-TLB of eMMC)--- IPMMU cache --- IPMMU main
 PCIe --------(micro-TLB of PCIe)--- IPMMU cache --- IPMMU main

Now this IPMMU driver allows eMMC host, and it is safe to use
the IPMMU. So, we can assume that it is safe to use the IPMMU
from PCIe devices too, because all PCIe devices transactions will
go to the micro-TLB of PCIe. So, add a new condition whether
the device is a PCIe device or not in the ipmmu_device_is_allowed()
which will be called if the PCIe host controller has iommu-map
property.

This can improve CPU load because the PCIe controllers only have
a capability for lower 32-bit memory area so that this can avoid
using swiotlb.

Note that IPMMU on R-Car Gen4 is different than R-Car Gen3 and
RZ/G2's one, especially OS-ID. But, for now, the IPMMU driver
takes care of OS-ID 0 only. In other words, all PCIe devices will
go to the micro-TLB of PCIe.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 Changes from v2:
https://lore.kernel.org/all/20230426082511.3621484-1-yoshihiro.shimoda.uh@renesas.com/
 - Add descriptions why it is safe to add PCIe devices and why
   this is needed.

 drivers/iommu/ipmmu-vmsa.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c
index 9f64c5c9f5b9..6efc99382edb 100644
--- a/drivers/iommu/ipmmu-vmsa.c
+++ b/drivers/iommu/ipmmu-vmsa.c
@@ -19,6 +19,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
+#include <linux/pci.h>
 #include <linux/platform_device.h>
 #include <linux/sizes.h>
 #include <linux/slab.h>
@@ -723,6 +724,10 @@ static bool ipmmu_device_is_allowed(struct device *dev)
 	if (soc_device_match(soc_denylist))
 		return false;
 
+	/* Check whether this device is a PCI device */
+	if (dev_is_pci(dev))
+		return true;
+
 	/* Check whether this device can work with the IPMMU */
 	for (i = 0; i < ARRAY_SIZE(devices_allowlist); i++) {
 		if (!strcmp(dev_name(dev), devices_allowlist[i]))
-- 
2.25.1