From: Aditya Srivastava <yashsri421@gmail.com>
To: herbert@gondor.apana.org.au
Cc: corbet@lwn.net, rdunlap@infradead.org,
linux-kernel@vger.kernel.org, yashsri421@gmail.com,
linux-crypto@vger.kernel.org,
linux-kernel-mentees@lists.linuxfoundation.org,
davem@davemloft.net
Subject: [PATCH] crypto: ux500: fix incorrect kernel-doc comment syntax
Date: Sun, 21 Mar 2021 17:39:12 +0530 [thread overview]
Message-ID: <20210321120912.12905-1-yashsri421@gmail.com> (raw)
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are certain files in drivers/crypto/ux500, which follow this syntax,
but the content inside does not comply with kernel-doc.
Such lines were probably not meant for kernel-doc parsing, but are parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.
E.g., presence of kernel-doc like comment in the header lines for
drivers/crypto/ux500/cryp/cryp.h at header causes this warning:
"warning: expecting prototype for ST(). Prototype was for _CRYP_H_() instead"
Similarly for other files too.
Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
---
drivers/crypto/ux500/cryp/cryp.c | 2 +-
drivers/crypto/ux500/cryp/cryp.h | 2 +-
drivers/crypto/ux500/cryp/cryp_core.c | 2 +-
drivers/crypto/ux500/cryp/cryp_irq.c | 2 +-
drivers/crypto/ux500/cryp/cryp_irq.h | 4 ++--
drivers/crypto/ux500/cryp/cryp_irqp.h | 4 ++--
drivers/crypto/ux500/cryp/cryp_p.h | 14 +++++++-------
7 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/crypto/ux500/cryp/cryp.c b/drivers/crypto/ux500/cryp/cryp.c
index 9866c2a5e9a7..2b9436723d57 100644
--- a/drivers/crypto/ux500/cryp/cryp.c
+++ b/drivers/crypto/ux500/cryp/cryp.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
* Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
diff --git a/drivers/crypto/ux500/cryp/cryp.h b/drivers/crypto/ux500/cryp/cryp.h
index 8da7f87b339b..db5713d7c940 100644
--- a/drivers/crypto/ux500/cryp/cryp.h
+++ b/drivers/crypto/ux500/cryp/cryp.h
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/**
+/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
* Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c
index c3adeb2e5823..df68b7bd0a7a 100644
--- a/drivers/crypto/ux500/cryp/cryp_core.c
+++ b/drivers/crypto/ux500/cryp/cryp_core.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
* Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson.
diff --git a/drivers/crypto/ux500/cryp/cryp_irq.c b/drivers/crypto/ux500/cryp/cryp_irq.c
index 7ebde69e8c76..6d2f07bec98a 100644
--- a/drivers/crypto/ux500/cryp/cryp_irq.c
+++ b/drivers/crypto/ux500/cryp/cryp_irq.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
* Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
diff --git a/drivers/crypto/ux500/cryp/cryp_irq.h b/drivers/crypto/ux500/cryp/cryp_irq.h
index 1984f30100ff..da90029ea141 100644
--- a/drivers/crypto/ux500/cryp/cryp_irq.h
+++ b/drivers/crypto/ux500/cryp/cryp_irq.h
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/**
+/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
* Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
@@ -19,7 +19,7 @@ enum cryp_irq_src_id {
CRYP_IRQ_SRC_ALL = 0x3
};
-/**
+/*
* M0 Funtions
*/
void cryp_enable_irq_src(struct cryp_device_data *device_data, u32 irq_src);
diff --git a/drivers/crypto/ux500/cryp/cryp_irqp.h b/drivers/crypto/ux500/cryp/cryp_irqp.h
index 879ed68a12d7..4981a3f461e5 100644
--- a/drivers/crypto/ux500/cryp/cryp_irqp.h
+++ b/drivers/crypto/ux500/cryp/cryp_irqp.h
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/**
+/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
* Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
@@ -13,7 +13,7 @@
#include "cryp_irq.h"
-/**
+/*
*
* CRYP Registers - Offset mapping
* +-----------------+
diff --git a/drivers/crypto/ux500/cryp/cryp_p.h b/drivers/crypto/ux500/cryp/cryp_p.h
index 0df84eaa8531..ba17b1ffd94d 100644
--- a/drivers/crypto/ux500/cryp/cryp_p.h
+++ b/drivers/crypto/ux500/cryp/cryp_p.h
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/**
+/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
* Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
@@ -17,7 +17,7 @@
#include "cryp.h"
#include "cryp_irqp.h"
-/**
+/*
* Generic Macros
*/
#define CRYP_SET_BITS(reg_name, mask) \
@@ -34,7 +34,7 @@
writel_relaxed(((readl_relaxed(reg) & ~(mask)) | \
(((u32)val << shift) & (mask))), reg)
-/**
+/*
* CRYP specific Macros
*/
#define CRYP_PERIPHERAL_ID0 0xE3
@@ -48,7 +48,7 @@
#define CRYP_PCELL_ID2 0x05
#define CRYP_PCELL_ID3 0xB1
-/**
+/*
* CRYP register default values
*/
#define MAX_DEVICE_SUPPORT 2
@@ -62,7 +62,7 @@
#define CRYP_KEY_DEFAULT 0x0
#define CRYP_INIT_VECT_DEFAULT 0x0
-/**
+/*
* CRYP Control register specific mask
*/
#define CRYP_CR_SECURE_MASK BIT(0)
@@ -91,7 +91,7 @@
#define CRYP_SR_IFEM_MASK BIT(0)
#define CRYP_SR_BUSY_MASK BIT(4)
-/**
+/*
* Bit position used while setting bits in register
*/
#define CRYP_CR_PRLG_POS 1
@@ -107,7 +107,7 @@
#define CRYP_SR_BUSY_POS 4
-/**
+/*
* CRYP PCRs------PC_NAND control register
* BIT_MASK
*/
--
2.17.1
_______________________________________________
Linux-kernel-mentees mailing list
Linux-kernel-mentees@lists.linuxfoundation.org
https://lists.linuxfoundation.org/mailman/listinfo/linux-kernel-mentees
next reply other threads:[~2021-03-21 12:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-21 12:09 Aditya Srivastava [this message]
2021-03-21 17:33 ` [PATCH] crypto: ux500: fix incorrect kernel-doc comment syntax Randy Dunlap
2021-03-26 9:34 ` Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210321120912.12905-1-yashsri421@gmail.com \
--to=yashsri421@gmail.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel-mentees@lists.linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rdunlap@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).