linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yinghai Lu <Yinghai.Lu@Sun.COM>
To: Ingo Molnar <mingo@elte.hu>, Greg KH <greg@kroah.com>,
	Andrew Morton <akpm@linux-foundation.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [PATCH] x86 pci: remove checking type for mmconfig probe
Date: Wed, 27 Feb 2008 16:39:52 -0800	[thread overview]
Message-ID: <200802271639.52958.yinghai.lu@sun.com> (raw)


don't need to check if it is type1 or type2. we can use raw_pci_ops dirctly.

also make pci_direct_conf1 static again.

anyway is there system with type 2 and mmconf support?

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>

diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c
index 42f3e4c..739ce26 100644
--- a/arch/x86/pci/direct.c
+++ b/arch/x86/pci/direct.c
@@ -76,7 +76,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus,
 
 #undef PCI_CONF1_ADDRESS
 
-struct pci_raw_ops pci_direct_conf1 = {
+static struct pci_raw_ops pci_direct_conf1 = {
 	.read =		pci_conf1_read,
 	.write =	pci_conf1_write,
 };
@@ -258,7 +258,8 @@ void __init pci_direct_init(int type)
 {
 	if (type == 0)
 		return;
-	printk(KERN_INFO "PCI: Using configuration type %d\n", type);
+	printk(KERN_INFO "PCI: Using configuration type %d for base access\n",
+		 type);
 	if (type == 1)
 		raw_pci_ops = &pci_direct_conf1;
 	else
@@ -275,8 +276,10 @@ int __init pci_direct_probe(void)
 	if (!region)
 		goto type2;
 
-	if (pci_check_type1())
+	if (pci_check_type1()) {
+		raw_pci_ops = &pci_direct_conf1;
 		return 1;
+	}
 	release_resource(region);
 
  type2:
@@ -290,7 +293,6 @@ int __init pci_direct_probe(void)
 		goto fail2;
 
 	if (pci_check_type2()) {
-		printk(KERN_INFO "PCI: Using configuration type 2\n");
 		raw_pci_ops = &pci_direct_conf2;
 		return 2;
 	}
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index 2080b04..b4083dc 100644
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -6,12 +6,12 @@
    in the right sequence from here. */
 static __init int pci_access_init(void)
 {
-	int type __maybe_unused = 0;
-
 #ifdef CONFIG_PCI_DIRECT
+	int type = 0;
+
 	type = pci_direct_probe();
 #endif
-	pci_mmcfg_early_init(type);
+	pci_mmcfg_early_init();
 	if (raw_pci_ops)
 		return 0;
 #ifdef CONFIG_PCI_BIOS
@@ -26,7 +26,7 @@ static __init int pci_access_init(void)
 #ifdef CONFIG_PCI_DIRECT
 	pci_direct_init(type);
 #endif
-	if (!raw_pci_ops)
+	if (!raw_pci_ops && !raw_pci_ext_ops)
 		printk(KERN_ERR
 		"PCI: Fatal: No config space access function found\n");
 
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 1dbc101..16f610b 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -28,7 +28,7 @@ static int __initdata pci_mmcfg_resources_inserted;
 static const char __init *pci_mmcfg_e7520(void)
 {
 	u32 win;
-	pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win);
+	raw_pci_ops->read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win);
 
 	win = win & 0xf000;
 	if(win == 0x0000 || win == 0xf000)
@@ -53,7 +53,7 @@ static const char __init *pci_mmcfg_intel_945(void)
 
 	pci_mmcfg_config_num = 1;
 
-	pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar);
+	raw_pci_ops->read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar);
 
 	/* Enable bit */
 	if (!(pciexbar & 1))
@@ -179,6 +179,9 @@ static int __init pci_mmcfg_check_hostbridge(void)
 	int i;
 	const char *name;
 
+	if (!raw_pci_ops)
+		return 0;
+
 	pci_mmcfg_config_num = 0;
 	pci_mmcfg_config = NULL;
 	name = NULL;
@@ -186,7 +189,7 @@ static int __init pci_mmcfg_check_hostbridge(void)
 	for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
 		bus =  pci_mmcfg_probes[i].bus;
 		devfn = pci_mmcfg_probes[i].devfn;
-		pci_direct_conf1.read(0, bus, devfn, 0, 4, &l);
+		raw_pci_ops->read(0, bus, devfn, 0, 4, &l);
 		vendor = l & 0xffff;
 		device = (l >> 16) & 0xffff;
 
@@ -304,7 +307,7 @@ static int __init is_acpi_reserved(unsigned long start, unsigned long end)
 	return mcfg_res.flags;
 }
 
-static void __init pci_mmcfg_reject_broken(int type, int early)
+static void __init pci_mmcfg_reject_broken(int early)
 {
 	typeof(pci_mmcfg_config[0]) *cfg;
 	int i;
@@ -342,8 +345,8 @@ static void __init pci_mmcfg_reject_broken(int type, int early)
 			       " reserved in ACPI motherboard resources\n",
 			       cfg->address);
 		/* Don't try to do this check unless configuration
-		   type 1 is available. */
-		if (type == 1 && e820_all_mapped(cfg->address,
+		   type 1 is available. how about type 2 ?*/
+		if (raw_pci_ops && e820_all_mapped(cfg->address,
 						  cfg->address + size - 1,
 						  E820_RESERVED)) {
 			printk(KERN_NOTICE
@@ -368,7 +371,7 @@ reject:
 
 static int __initdata known_bridge;
 
-void __init __pci_mmcfg_init(int type, int early)
+void __init __pci_mmcfg_init(int early)
 {
 	/* MMCONFIG disabled */
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
@@ -382,7 +385,7 @@ void __init __pci_mmcfg_init(int type, int early)
 	if (known_bridge)
 		return;
 
-	if (early && type == 1) {
+	if (early) {
 		if (pci_mmcfg_check_hostbridge())
 			known_bridge = 1;
 #if 0
@@ -394,7 +397,7 @@ void __init __pci_mmcfg_init(int type, int early)
 
 	if (!known_bridge) {
 		acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
-		pci_mmcfg_reject_broken(type, early);
+		pci_mmcfg_reject_broken(early);
 	}
 
 	if ((pci_mmcfg_config_num == 0) ||
@@ -415,19 +418,14 @@ void __init __pci_mmcfg_init(int type, int early)
 	}
 }
 
-void __init pci_mmcfg_early_init(int type)
+void __init pci_mmcfg_early_init(void)
 {
-	__pci_mmcfg_init(type, 1);
+	__pci_mmcfg_init(1);
 }
 
 void __init pci_mmcfg_late_init(void)
 {
-	int type = 0;
-
-	if (pci_probe & PCI_PROBE_CONF1)
-		type = 1;
-
-	__pci_mmcfg_init(type, 0);
+	__pci_mmcfg_init(0);
 }
 
 static int __init pci_mmcfg_late_insert_resources(void)
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index c9fb637..d345661 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -95,8 +95,6 @@ struct pci_raw_ops {
 extern struct pci_raw_ops *raw_pci_ops;
 extern struct pci_raw_ops *raw_pci_ext_ops;
 
-extern struct pci_raw_ops pci_direct_conf1;
-
 extern int pci_direct_probe(void);
 extern void pci_direct_init(int type);
 extern void pci_pcbios_init(void);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index f9ab5fe..8c76066 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1052,10 +1052,10 @@ extern unsigned long pci_cardbus_mem_size;
 extern int pcibios_add_platform_entries(struct pci_dev *dev);
 
 #ifdef CONFIG_PCI_MMCONFIG
-extern void __init pci_mmcfg_early_init(int type);
+extern void __init pci_mmcfg_early_init(void);
 extern void __init pci_mmcfg_late_init(void);
 #else
-static inline void pci_mmcfg_early_init(int type) { }
+static inline void pci_mmcfg_early_init(void) { }
 static inline void pci_mmcfg_late_init(void) { }
 #endif
 

             reply	other threads:[~2008-02-28  0:31 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-02-28  0:39 Yinghai Lu [this message]
2008-02-29  7:56 ` [PATCH] x86 pci: remove checking type for mmconfig probe v2 Yinghai Lu
2008-02-29 19:17   ` Ingo Molnar
2008-02-29 19:21     ` H. Peter Anvin
2008-03-01  6:02   ` Greg KH
2008-03-01  8:36     ` Yinghai Lu
2008-03-04  6:23       ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200802271639.52958.yinghai.lu@sun.com \
    --to=yinghai.lu@sun.com \
    --cc=akpm@linux-foundation.org \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).