From: Iurii Zaikin <yzaikin@google.com>
To: linux-kselftest@vger.kernel.org, linux-ext4@vger.kernel.org,
skhan@linuxfoundation.org, tytso@mit.edu,
adilger.kernel@dilger.ca
Cc: kunit-dev@googlegroups.com, brendanhiggins@google.com,
Iurii Zaikin <yzaikin@google.com>
Subject: [PATCH linux-kselftest/test v2] ext4: add kunit test for decoding extended timestamps
Date: Wed, 9 Oct 2019 19:39:31 -0700 [thread overview]
Message-ID: <20191010023931.230475-1-yzaikin@google.com> (raw)
KUnit tests for decoding extended 64 bit timestamps.
Signed-off-by: Iurii Zaikin <yzaikin@google.com>
---
fs/ext4/Kconfig | 12 +++
fs/ext4/Makefile | 1 +
fs/ext4/inode-test.c | 221 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 234 insertions(+)
create mode 100644 fs/ext4/inode-test.c
diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig
index cbb5ca830e57..cb0b52753674 100644
--- a/fs/ext4/Kconfig
+++ b/fs/ext4/Kconfig
@@ -106,3 +106,15 @@ config EXT4_DEBUG
If you select Y here, then you will be able to turn on debugging
with a command such as:
echo 1 > /sys/module/ext4/parameters/mballoc_debug
+
+config EXT4_KUNIT_TESTS
+ bool "KUnit test for ext4 inode"
+ depends on EXT4_FS
+ depends on KUNIT
+ help
+ This builds the ext4 inode sysctl unit test, which runs on boot.
+ Tests the encoding correctness of ext4 inode.
+ For more information on KUnit and unit tests in general please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+ If unsure, say N.
diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile
index b17ddc229ac5..a0588fd2eea6 100644
--- a/fs/ext4/Makefile
+++ b/fs/ext4/Makefile
@@ -13,4 +13,5 @@ ext4-y := balloc.o bitmap.o block_validity.o dir.o ext4_jbd2.o extents.o \
ext4-$(CONFIG_EXT4_FS_POSIX_ACL) += acl.o
ext4-$(CONFIG_EXT4_FS_SECURITY) += xattr_security.o
+ext4-$(CONFIG_EXT4_KUNIT_TESTS) += inode-test.o
ext4-$(CONFIG_FS_VERITY) += verity.o
diff --git a/fs/ext4/inode-test.c b/fs/ext4/inode-test.c
new file mode 100644
index 000000000000..43bc6cb547cd
--- /dev/null
+++ b/fs/ext4/inode-test.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * KUnit test of ext4 inode that verify the seconds part of [a/c/m]
+ * timestamps in ext4 inode structs are decoded correctly.
+ * These tests are derived from the table under
+ * Documentation/filesystems/ext4/inodes.rst Inode Timestamps
+ */
+
+#include <kunit/test.h>
+#include <linux/kernel.h>
+#include <linux/time64.h>
+
+#include "ext4.h"
+
+/* binary: 00000000 00000000 00000000 00000000 */
+#define LOWER_MSB_0 0L
+/* binary: 01111111 11111111 11111111 11111111 */
+#define UPPER_MSB_0 0x7fffffffL
+/* binary: 10000000 00000000 00000000 00000000 */
+#define LOWER_MSB_1 (-0x80000000L)
+/* binary: 11111111 11111111 11111111 11111111 */
+#define UPPER_MSB_1 (-1L)
+/* binary: 00111111 11111111 11111111 11111111 */
+#define MAX_NANOSECONDS ((1L << 30) - 1)
+
+#define CASE_NAME_FORMAT "%s: msb:%x lower_bound:%x extra_bits: %x"
+
+struct timestamp_expectation {
+ const char *test_case_name;
+ struct timespec64 expected;
+ u32 extra_bits;
+ bool msb_set;
+ bool lower_bound;
+};
+
+static time64_t get_32bit_time(const struct timestamp_expectation * const test)
+{
+ if (test->msb_set) {
+ if (test->lower_bound)
+ return LOWER_MSB_1;
+
+ return UPPER_MSB_1;
+ }
+
+ if (test->lower_bound)
+ return LOWER_MSB_0;
+ return UPPER_MSB_0;
+}
+
+
+static void inode_test_xtimestamp_decoding(struct kunit *test)
+{
+ const struct timestamp_expectation test_data[] = {
+ {
+ .test_case_name = "1901-12-13",
+ .msb_set = true,
+ .lower_bound = true,
+ .extra_bits = 0,
+ .expected = {.tv_sec = -0x80000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "1969-12-31",
+ .msb_set = true,
+ .lower_bound = false,
+ .extra_bits = 0,
+ .expected = {.tv_sec = -1LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "1970-01-01",
+ .msb_set = false,
+ .lower_bound = true,
+ .extra_bits = 0,
+ .expected = {0LL, 0L},
+ },
+
+ {
+ .test_case_name = "2038-01-19",
+ .msb_set = false,
+ .lower_bound = false,
+ .extra_bits = 0,
+ .expected = {.tv_sec = 0x7fffffffLL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2038-01-19",
+ .msb_set = true,
+ .lower_bound = true,
+ .extra_bits = 1,
+ .expected = {.tv_sec = 0x80000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2106-02-07",
+ .msb_set = true,
+ .lower_bound = false,
+ .extra_bits = 1,
+ .expected = {.tv_sec = 0xffffffffLL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2106-02-07",
+ .msb_set = false,
+ .lower_bound = true,
+ .extra_bits = 1,
+ .expected = {.tv_sec = 0x100000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2174-02-25",
+ .msb_set = false,
+ .lower_bound = false,
+ .extra_bits = 1,
+ .expected = {.tv_sec = 0x17fffffffLL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2174-02-25",
+ .msb_set = true,
+ .lower_bound = true,
+ .extra_bits = 2,
+ .expected = {.tv_sec = 0x180000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2242-03-16",
+ .msb_set = true,
+ .lower_bound = false,
+ .extra_bits = 2,
+ .expected = {.tv_sec = 0x1ffffffffLL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2242-03-16",
+ .msb_set = false,
+ .lower_bound = true,
+ .extra_bits = 2,
+ .expected = {.tv_sec = 0x200000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = " 2310-04-04",
+ .msb_set = false,
+ .lower_bound = false,
+ .extra_bits = 2,
+ .expected = {.tv_sec = 0x27fffffffLL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = " 2310-04-04 00:00:00.1",
+ .msb_set = false,
+ .lower_bound = false,
+ .extra_bits = 6,
+ .expected = {.tv_sec = 0x27fffffffLL, .tv_nsec = 1L},
+ },
+
+ {
+ .test_case_name = "2378-04-22 00:00:00.MAX_NSEC",
+ .msb_set = false,
+ .lower_bound = true,
+ .extra_bits = 0xFFFFFFFF,
+ .expected = {.tv_sec = 0x300000000LL,
+ .tv_nsec = MAX_NANOSECONDS},
+ },
+
+ {
+ .test_case_name = "2378-04-22",
+ .msb_set = false,
+ .lower_bound = true,
+ .extra_bits = 3,
+ .expected = {.tv_sec = 0x300000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2446-05-10",
+ .msb_set = false,
+ .lower_bound = false,
+ .extra_bits = 3,
+ .expected = {.tv_sec = 0x37fffffffLL, .tv_nsec = 0L},
+ }
+ };
+
+ struct timespec64 timestamp;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(test_data); ++i) {
+ timestamp.tv_sec = get_32bit_time(&test_data[i]);
+ ext4_decode_extra_time(×tamp,
+ cpu_to_le32(test_data[i].extra_bits));
+
+ KUNIT_EXPECT_EQ_MSG(test,
+ test_data[i].expected.tv_sec,
+ timestamp.tv_sec,
+ CASE_NAME_FORMAT,
+ test_data[i].test_case_name,
+ test_data[i].msb_set,
+ test_data[i].lower_bound,
+ test_data[i].extra_bits);
+ KUNIT_EXPECT_EQ_MSG(test,
+ test_data[i].expected.tv_nsec,
+ timestamp.tv_nsec,
+ CASE_NAME_FORMAT,
+ test_data[i].test_case_name,
+ test_data[i].msb_set,
+ test_data[i].lower_bound,
+ test_data[i].extra_bits);
+ }
+}
+
+static struct kunit_case ext4_inode_test_cases[] = {
+ KUNIT_CASE(inode_test_xtimestamp_decoding),
+ {}
+};
+
+static struct kunit_suite ext4_inode_test_suite = {
+ .name = "ext4_inode_test",
+ .test_cases = ext4_inode_test_cases,
+};
+
+kunit_test_suite(ext4_inode_test_suite);
--
2.23.0.700.g56cf767bdb-goog
next reply other threads:[~2019-10-10 2:40 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-10 2:39 Iurii Zaikin [this message]
2019-10-10 3:46 ` [PATCH linux-kselftest/test v2] ext4: add kunit test for decoding extended timestamps Tim.Bird
2019-10-10 16:45 ` Iurii Zaikin
2019-10-10 20:29 ` Tim.Bird
2019-10-10 23:49 ` Iurii Zaikin
2019-10-10 17:11 ` Shuah Khan
2019-10-10 22:13 ` Iurii Zaikin
2019-10-11 10:05 ` Brendan Higgins
2019-10-11 13:19 ` Theodore Y. Ts'o
2019-10-12 2:38 ` Iurii Zaikin
2019-10-16 22:18 ` Brendan Higgins
2019-10-16 23:26 ` Shuah Khan
2019-10-17 0:07 ` Iurii Zaikin
2019-10-17 12:08 ` Theodore Y. Ts'o
2019-10-17 22:25 ` Tim.Bird
2019-10-17 22:56 ` Theodore Y. Ts'o
2019-10-17 23:40 ` Tim.Bird
2019-10-18 1:40 ` Theodore Y. Ts'o
2019-10-18 2:40 ` Tim.Bird
2019-10-18 15:27 ` Theodore Y. Ts'o
2019-10-18 20:24 ` Shuah Khan
2019-10-24 1:30 ` Brendan Higgins
2019-10-18 1:12 ` Brendan Higgins
2019-10-18 1:30 ` Tim.Bird
2019-10-17 22:49 ` Shuah Khan
2019-10-17 23:07 ` Iurii Zaikin
2019-10-17 23:12 ` Shuah Khan
2019-10-17 23:27 ` Iurii Zaikin
2019-10-17 23:42 ` Shuah Khan
2019-10-17 23:54 ` Tim.Bird
2019-10-17 23:59 ` Shuah Khan
2019-10-18 0:11 ` Iurii Zaikin
2019-10-18 0:38 ` Tim.Bird
2019-10-18 1:06 ` Iurii Zaikin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191010023931.230475-1-yzaikin@google.com \
--to=yzaikin@google.com \
--cc=adilger.kernel@dilger.ca \
--cc=brendanhiggins@google.com \
--cc=kunit-dev@googlegroups.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).