From: Jean-Jacques Hiblot <jjhiblot@ti.com>
To: Dan Murphy <dmurphy@ti.com>, <jacek.anaszewski@gmail.com>,
<pavel@ucw.cz>
Cc: <linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<tomi.valkeinen@ti.com>
Subject: Re: [PATCH v2 1/2] leds: tlc591xx: simplify driver by using the managed led API
Date: Wed, 10 Jul 2019 09:44:32 +0200 [thread overview]
Message-ID: <6242726a-ddb9-ab87-a28e-a1fa0ecbf87e@ti.com> (raw)
Message-ID: <20190710074432.f1u0kMCSTpTa2y1EZspWUCyWgA28ZV1Ssr9Keb48rM4@z> (raw)
In-Reply-To: <127551c1-d642-0603-f2f2-6fd4cc43bb93@ti.com>
Hi Dan,
On 08/07/2019 20:08, Dan Murphy wrote:
> JJ
>
> On 7/8/19 5:06 AM, Jean-Jacques Hiblot wrote:
>> Use the managed API of the LED class (devm_led_classdev_register()
>> instead of led_classdev_register()).
>> This allows us to remove the code used to track-and-destroy the LED
>> devices
>
> What changed from v1?
What changed is a bug fix in the loop: replaced led = &priv->leds[idx]
with led = &priv->leds[reg];
>
> I don't see any changes especially the bounds on the reg property.
It is not quite apparent in the diff, but there is such a check. Here is
what we have in the probe():
for_each_child_of_node(np, child) {
struct tlc591xx_led *led;
err = of_property_read_u32(child, "reg", ®);
if (err) {
of_node_put(child);
return err;
}
if (reg < 0 || reg >= tlc591xx->max_leds ||
priv->leds[reg].active) {
of_node_put(child);
return -EINVAL;
}
led = &priv->leds[reg];
[...]
}
}
>
> Dan
>
>
>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
>> ---
>> drivers/leds/leds-tlc591xx.c | 79 +++++++++---------------------------
>> 1 file changed, 20 insertions(+), 59 deletions(-)
>>
>> diff --git a/drivers/leds/leds-tlc591xx.c b/drivers/leds/leds-tlc591xx.c
>> index 59ff088c7d75..3d5a4b92f016 100644
>> --- a/drivers/leds/leds-tlc591xx.c
>> +++ b/drivers/leds/leds-tlc591xx.c
>> @@ -128,51 +128,6 @@ tlc591xx_brightness_set(struct led_classdev
>> *led_cdev,
>> return err;
>> }
>> -static void
>> -tlc591xx_destroy_devices(struct tlc591xx_priv *priv, unsigned int j)
>> -{
>> - int i = j;
>> -
>> - while (--i >= 0) {
>> - if (priv->leds[i].active)
>> - led_classdev_unregister(&priv->leds[i].ldev);
>> - }
>> -}
>> -
>> -static int
>> -tlc591xx_configure(struct device *dev,
>> - struct tlc591xx_priv *priv,
>> - const struct tlc591xx *tlc591xx)
>> -{
>> - unsigned int i;
>> - int err = 0;
>> -
>> - tlc591xx_set_mode(priv->regmap, MODE2_DIM);
>> - for (i = 0; i < TLC591XX_MAX_LEDS; i++) {
>> - struct tlc591xx_led *led = &priv->leds[i];
>> -
>> - if (!led->active)
>> - continue;
>> -
>> - led->priv = priv;
>> - led->led_no = i;
>> - led->ldev.brightness_set_blocking = tlc591xx_brightness_set;
>> - led->ldev.max_brightness = LED_FULL;
>> - err = led_classdev_register(dev, &led->ldev);
>> - if (err < 0) {
>> - dev_err(dev, "couldn't register LED %s\n",
>> - led->ldev.name);
>> - goto exit;
>> - }
>> - }
>> -
>> - return 0;
>> -
>> -exit:
>> - tlc591xx_destroy_devices(priv, i);
>> - return err;
>> -}
>> -
>> static const struct regmap_config tlc591xx_regmap = {
>> .reg_bits = 8,
>> .val_bits = 8,
>> @@ -225,7 +180,11 @@ tlc591xx_probe(struct i2c_client *client,
>> i2c_set_clientdata(client, priv);
>> + tlc591xx_set_mode(priv->regmap, MODE2_DIM);
>> +
>> for_each_child_of_node(np, child) {
>> + struct tlc591xx_led *led;
>> +
>> err = of_property_read_u32(child, "reg", ®);
>> if (err) {
>> of_node_put(child);
>> @@ -236,22 +195,25 @@ tlc591xx_probe(struct i2c_client *client,
>> of_node_put(child);
>> return -EINVAL;
>> }
>> - priv->leds[reg].active = true;
>> - priv->leds[reg].ldev.name =
>> + led = &priv->leds[reg];
>> +
>> + led->active = true;
>> + led->ldev.name =
>> of_get_property(child, "label", NULL) ? : child->name;
>> - priv->leds[reg].ldev.default_trigger =
>> + led->ldev.default_trigger =
>> of_get_property(child, "linux,default-trigger", NULL);
>> - }
>> - return tlc591xx_configure(dev, priv, tlc591xx);
>> -}
>> -
>> -static int
>> -tlc591xx_remove(struct i2c_client *client)
>> -{
>> - struct tlc591xx_priv *priv = i2c_get_clientdata(client);
>> -
>> - tlc591xx_destroy_devices(priv, TLC591XX_MAX_LEDS);
>> + led->priv = priv;
>> + led->led_no = reg;
>> + led->ldev.brightness_set_blocking = tlc591xx_brightness_set;
>> + led->ldev.max_brightness = LED_FULL;
>> + err = devm_led_classdev_register(dev, &led->ldev);
>> + if (err < 0) {
>> + dev_err(dev, "couldn't register LED %s\n",
>> + led->ldev.name);
>> + return err;
>> + }
>> + }
>> return 0;
>> }
>> @@ -268,7 +230,6 @@ static struct i2c_driver tlc591xx_driver = {
>> .of_match_table = of_match_ptr(of_tlc591xx_leds_match),
>> },
>> .probe = tlc591xx_probe,
>> - .remove = tlc591xx_remove,
>> .id_table = tlc591xx_id,
>> };
next prev parent reply other threads:[~2019-07-10 7:44 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-08 10:06 [PATCH v2 0/2] leds: tlc591xx: switch to OF and managed API Jean-Jacques Hiblot
2019-07-08 10:06 ` Jean-Jacques Hiblot
2019-07-08 10:06 ` [PATCH v2 1/2] leds: tlc591xx: simplify driver by using the managed led API Jean-Jacques Hiblot
2019-07-08 10:06 ` Jean-Jacques Hiblot
2019-07-08 18:08 ` Dan Murphy
2019-07-08 18:08 ` Dan Murphy
2019-07-10 7:44 ` Jean-Jacques Hiblot [this message]
2019-07-10 7:44 ` Jean-Jacques Hiblot
2019-07-08 10:06 ` [PATCH v2 2/2] leds: tlc591xx: Use the OF version of the LED registration function Jean-Jacques Hiblot
2019-07-08 10:06 ` Jean-Jacques Hiblot
2019-07-31 13:14 ` [PATCH v2 0/2] leds: tlc591xx: switch to OF and managed API Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6242726a-ddb9-ab87-a28e-a1fa0ecbf87e@ti.com \
--to=jjhiblot@ti.com \
--cc=dmurphy@ti.com \
--cc=jacek.anaszewski@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).