Linux-LEDs Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v5 0/4] Add a generic driver for LED-based backlight
@ 2019-09-10 10:59 Jean-Jacques Hiblot
  2019-09-10 10:59 ` [PATCH v5 1/4] leds: Add of_led_get() and led_put() Jean-Jacques Hiblot
                   ` (3 more replies)
  0 siblings, 4 replies; 9+ messages in thread
From: Jean-Jacques Hiblot @ 2019-09-10 10:59 UTC (permalink / raw)
  To: jacek.anaszewski, pavel, robh+dt, mark.rutland, lee.jones,
	daniel.thompson
  Cc: dmurphy, linux-leds, linux-kernel, dridevel, tomi.valkeinen,
	Jean-Jacques Hiblot

This series aims to add a led-backlight driver, similar to pwm-backlight,
but using a LED class device underneath.

A few years ago (2015), Tomi Valkeinen posted a series implementing a
backlight driver on top of a LED device:
https://patchwork.kernel.org/patch/7293991/
https://patchwork.kernel.org/patch/7294001/
https://patchwork.kernel.org/patch/7293981/

The discussion stopped because Tomi lacked the time to work on it.

changes in v5:
- removed LED brightness scaling
- disable sysfs the interface of the LEDs when used by the backlight device

changes in v4:
- fix dev_err() messages and commit logs following the advices of Pavel
- cosmetic changes (indents, getting rid of  "? 1 : 0" in
  led_match_led_node())

changes in v3:
- dt binding: don't limit the brightness range to 0-255. Use the range of
  the underlying LEDs. as a side-effect, all LEDs must now have the same
  range
- driver: Adapt to dt binding update.
- driver: rework probe() for clarity and remove the remaining goto.

changes in v2:
- handle more than one LED.
- don't make the backlight device a child of the LED controller.
- make brightness-levels and default-brightness-level optional
- removed the option to use a GPIO enable.
- removed the option to use a regulator. It should be handled by the LED
  core
- don't make any change to the LED core (not needed anymore)


Jean-Jacques Hiblot (2):
  leds: Add managed API to get a LED from a device driver
  dt-bindings: backlight: Add led-backlight binding

Tomi Valkeinen (2):
  leds: Add of_led_get() and led_put()
  backlight: add led-backlight driver

 .../bindings/leds/backlight/led-backlight.txt |  28 ++
 drivers/leds/led-class.c                      |  92 ++++++
 drivers/video/backlight/Kconfig               |   7 +
 drivers/video/backlight/Makefile              |   1 +
 drivers/video/backlight/led_bl.c              | 264 ++++++++++++++++++
 include/linux/leds.h                          |   6 +
 6 files changed, 398 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
 create mode 100644 drivers/video/backlight/led_bl.c

-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 1/4] leds: Add of_led_get() and led_put()
  2019-09-10 10:59 [PATCH v5 0/4] Add a generic driver for LED-based backlight Jean-Jacques Hiblot
@ 2019-09-10 10:59 ` Jean-Jacques Hiblot
  2019-09-10 10:59 ` [PATCH v5 2/4] leds: Add managed API to get a LED from a device driver Jean-Jacques Hiblot
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 9+ messages in thread
From: Jean-Jacques Hiblot @ 2019-09-10 10:59 UTC (permalink / raw)
  To: jacek.anaszewski, pavel, robh+dt, mark.rutland, lee.jones,
	daniel.thompson
  Cc: dmurphy, linux-leds, linux-kernel, dridevel, tomi.valkeinen,
	Jean-Jacques Hiblot

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

This patch adds basic support for a kernel driver to get a LED device.
This will be used by the led-backlight driver.

Only OF version is implemented for now, and the behavior is similar to
PWM's of_pwm_get() and pwm_put().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
 drivers/leds/led-class.c | 50 ++++++++++++++++++++++++++++++++++++++++
 include/linux/leds.h     |  4 ++++
 2 files changed, 54 insertions(+)

diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 4e2af8df5aa8..eb98bf13e53b 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -18,6 +18,7 @@
 #include <linux/spinlock.h>
 #include <linux/timer.h>
 #include <uapi/linux/uleds.h>
+#include <linux/of.h>
 #include "leds.h"
 
 static struct class *leds_class;
@@ -213,6 +214,55 @@ static int led_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(leds_class_dev_pm_ops, led_suspend, led_resume);
 
+static int led_match_led_node(struct device *led_dev, const void *data)
+{
+	return led_dev->of_node == data;
+}
+
+/**
+ * of_led_get() - request a LED device via the LED framework
+ * @np: device node to get the LED device from
+ * @index: the index of the LED
+ *
+ * Returns the LED device parsed from the phandle specified in the "leds"
+ * property of a device tree node or a negative error-code on failure.
+ */
+struct led_classdev *of_led_get(struct device_node *np, int index)
+{
+	struct device *led_dev;
+	struct led_classdev *led_cdev;
+	struct device_node *led_node;
+
+	led_node = of_parse_phandle(np, "leds", index);
+	if (!led_node)
+		return ERR_PTR(-ENOENT);
+
+	led_dev = class_find_device(leds_class, NULL, led_node,
+		led_match_led_node);
+	of_node_put(led_node);
+
+	if (!led_dev)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	led_cdev = dev_get_drvdata(led_dev);
+
+	if (!try_module_get(led_cdev->dev->parent->driver->owner))
+		return ERR_PTR(-ENODEV);
+
+	return led_cdev;
+}
+EXPORT_SYMBOL_GPL(of_led_get);
+
+/**
+ * led_put() - release a LED device
+ * @led_cdev: LED device
+ */
+void led_put(struct led_classdev *led_cdev)
+{
+	module_put(led_cdev->dev->parent->driver->owner);
+}
+EXPORT_SYMBOL_GPL(led_put);
+
 static int match_name(struct device *dev, const void *data)
 {
 	if (!dev_name(dev))
diff --git a/include/linux/leds.h b/include/linux/leds.h
index bee8e3f8dddd..0a71c7cdd191 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -19,6 +19,7 @@
 
 struct device;
 struct led_pattern;
+struct device_node;
 /*
  * LED Core
  */
@@ -145,6 +146,9 @@ extern void devm_led_classdev_unregister(struct device *parent,
 extern void led_classdev_suspend(struct led_classdev *led_cdev);
 extern void led_classdev_resume(struct led_classdev *led_cdev);
 
+extern struct led_classdev *of_led_get(struct device_node *np, int index);
+extern void led_put(struct led_classdev *led_cdev);
+
 /**
  * led_blink_set - set blinking with software fallback
  * @led_cdev: the LED to start blinking
-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 2/4] leds: Add managed API to get a LED from a device driver
  2019-09-10 10:59 [PATCH v5 0/4] Add a generic driver for LED-based backlight Jean-Jacques Hiblot
  2019-09-10 10:59 ` [PATCH v5 1/4] leds: Add of_led_get() and led_put() Jean-Jacques Hiblot
@ 2019-09-10 10:59 ` Jean-Jacques Hiblot
  2019-09-10 10:59 ` [PATCH v5 3/4] dt-bindings: backlight: Add led-backlight binding Jean-Jacques Hiblot
  2019-09-10 10:59 ` [PATCH v5 4/4] backlight: add led-backlight driver Jean-Jacques Hiblot
  3 siblings, 0 replies; 9+ messages in thread
From: Jean-Jacques Hiblot @ 2019-09-10 10:59 UTC (permalink / raw)
  To: jacek.anaszewski, pavel, robh+dt, mark.rutland, lee.jones,
	daniel.thompson
  Cc: dmurphy, linux-leds, linux-kernel, dridevel, tomi.valkeinen,
	Jean-Jacques Hiblot

If the LED is acquired by a consumer device with devm_led_get(), it is
automatically released when the device is detached.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
 drivers/leds/led-class.c | 42 ++++++++++++++++++++++++++++++++++++++++
 include/linux/leds.h     |  2 ++
 2 files changed, 44 insertions(+)

diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index eb98bf13e53b..7763aad8fabe 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -263,6 +263,48 @@ void led_put(struct led_classdev *led_cdev)
 }
 EXPORT_SYMBOL_GPL(led_put);
 
+static void devm_led_release(struct device *dev, void *res)
+{
+	struct led_classdev **p = res;
+
+	led_put(*p);
+}
+
+/**
+ * devm_led_get - Resource-managed request of a LED device
+ * @dev:	LED consumer
+ * @idx:	index of the LED to obtain in the consumer
+ *
+ * The device node of the device is parse to find the request LED device.
+ * The LED device returned from this function is automatically released
+ * on driver detach.
+ *
+ * @return a pointer to a LED device or ERR_PTR(errno) on failure.
+ */
+struct led_classdev *__must_check devm_led_get(struct device *dev,
+					       int index)
+{
+	struct led_classdev *led;
+	struct led_classdev **dr;
+
+	led = of_led_get(dev->of_node, index);
+	if (IS_ERR(led))
+		return led;
+
+	dr = devres_alloc(devm_led_release, sizeof(struct led_classdev *),
+			  GFP_KERNEL);
+	if (!dr) {
+		led_put(led);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	*dr = led;
+	devres_add(dev, dr);
+
+	return led;
+}
+EXPORT_SYMBOL_GPL(devm_led_get);
+
 static int match_name(struct device *dev, const void *data)
 {
 	if (!dev_name(dev))
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 0a71c7cdd191..7fcec566d774 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -148,6 +148,8 @@ extern void led_classdev_resume(struct led_classdev *led_cdev);
 
 extern struct led_classdev *of_led_get(struct device_node *np, int index);
 extern void led_put(struct led_classdev *led_cdev);
+struct led_classdev *__must_check devm_led_get(struct device *dev,
+					       int index);
 
 /**
  * led_blink_set - set blinking with software fallback
-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 3/4] dt-bindings: backlight: Add led-backlight binding
  2019-09-10 10:59 [PATCH v5 0/4] Add a generic driver for LED-based backlight Jean-Jacques Hiblot
  2019-09-10 10:59 ` [PATCH v5 1/4] leds: Add of_led_get() and led_put() Jean-Jacques Hiblot
  2019-09-10 10:59 ` [PATCH v5 2/4] leds: Add managed API to get a LED from a device driver Jean-Jacques Hiblot
@ 2019-09-10 10:59 ` Jean-Jacques Hiblot
  2019-09-10 11:26   ` Daniel Thompson
  2019-09-10 10:59 ` [PATCH v5 4/4] backlight: add led-backlight driver Jean-Jacques Hiblot
  3 siblings, 1 reply; 9+ messages in thread
From: Jean-Jacques Hiblot @ 2019-09-10 10:59 UTC (permalink / raw)
  To: jacek.anaszewski, pavel, robh+dt, mark.rutland, lee.jones,
	daniel.thompson
  Cc: dmurphy, linux-leds, linux-kernel, dridevel, tomi.valkeinen,
	Jean-Jacques Hiblot

Add DT binding for led-backlight.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
---
 .../bindings/leds/backlight/led-backlight.txt | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.txt

diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
new file mode 100644
index 000000000000..4c7dfbe7f67a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
@@ -0,0 +1,28 @@
+led-backlight bindings
+
+This binding is used to describe a basic backlight device made of LEDs.
+It can also be used to describe a backlight device controlled by the output of
+a LED driver.
+
+Required properties:
+  - compatible: "led-backlight"
+  - leds: a list of LEDs
+
+Optional properties:
+  - brightness-levels: Array of distinct brightness levels. The levels must be
+                       in the range accepted by the underlying LED devices.
+                       This is used to translate a backlight brightness level
+                       into a LED brightness level. If it is not provided, the
+                       identity mapping is used.
+
+  - default-brightness-level: The default brightness level.
+
+Example:
+
+	backlight {
+		compatible = "led-backlight";
+
+		leds = <&led1>, <&led2>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 4/4] backlight: add led-backlight driver
  2019-09-10 10:59 [PATCH v5 0/4] Add a generic driver for LED-based backlight Jean-Jacques Hiblot
                   ` (2 preceding siblings ...)
  2019-09-10 10:59 ` [PATCH v5 3/4] dt-bindings: backlight: Add led-backlight binding Jean-Jacques Hiblot
@ 2019-09-10 10:59 ` Jean-Jacques Hiblot
  2019-09-10 11:26   ` Daniel Thompson
  3 siblings, 1 reply; 9+ messages in thread
From: Jean-Jacques Hiblot @ 2019-09-10 10:59 UTC (permalink / raw)
  To: jacek.anaszewski, pavel, robh+dt, mark.rutland, lee.jones,
	daniel.thompson
  Cc: dmurphy, linux-leds, linux-kernel, dridevel, tomi.valkeinen,
	Jean-Jacques Hiblot

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

This patch adds a led-backlight driver (led_bl), which is similar to
pwm_bl except the driver uses a LED class driver to adjust the
brightness in the HW. Multiple LEDs can be used for a single backlight.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
 drivers/video/backlight/Kconfig  |   7 +
 drivers/video/backlight/Makefile |   1 +
 drivers/video/backlight/led_bl.c | 264 +++++++++++++++++++++++++++++++
 3 files changed, 272 insertions(+)
 create mode 100644 drivers/video/backlight/led_bl.c

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 8b081d61773e..585a1787618c 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -458,6 +458,13 @@ config BACKLIGHT_RAVE_SP
 	help
 	  Support for backlight control on RAVE SP device.
 
+config BACKLIGHT_LED
+	tristate "Generic LED based Backlight Driver"
+	depends on LEDS_CLASS && OF
+	help
+	  If you have a LCD backlight adjustable by LED class driver, say Y
+	  to enable this driver.
+
 endif # BACKLIGHT_CLASS_DEVICE
 
 endmenu
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 63c507c07437..2a67642966a5 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -57,3 +57,4 @@ obj-$(CONFIG_BACKLIGHT_TPS65217)	+= tps65217_bl.o
 obj-$(CONFIG_BACKLIGHT_WM831X)		+= wm831x_bl.o
 obj-$(CONFIG_BACKLIGHT_ARCXCNN) 	+= arcxcnn_bl.o
 obj-$(CONFIG_BACKLIGHT_RAVE_SP)		+= rave-sp-backlight.o
+obj-$(CONFIG_BACKLIGHT_LED)		+= led_bl.o
diff --git a/drivers/video/backlight/led_bl.c b/drivers/video/backlight/led_bl.c
new file mode 100644
index 000000000000..a72456e11fb9
--- /dev/null
+++ b/drivers/video/backlight/led_bl.c
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2019 Texas Instruments Incorporated -  http://www.ti.com/
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * Based on pwm_bl.c
+ */
+
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define BKL_FULL_BRIGHTNESS 255
+
+struct led_bl_data {
+	struct device		*dev;
+	struct backlight_device	*bl_dev;
+	struct led_classdev	**leds;
+	bool			enabled;
+	int			nb_leds;
+	unsigned int		*levels;
+	unsigned int		default_brightness;
+	unsigned int		max_brightness;
+};
+
+static void led_bl_set_brightness(struct led_bl_data *priv, int level)
+{
+	int i;
+	int bkl_brightness;
+
+	if (priv->levels)
+		bkl_brightness = priv->levels[level];
+	else
+		bkl_brightness = level;
+
+	for (i = 0; i < priv->nb_leds; i++)
+		led_set_brightness(priv->leds[i], bkl_brightness);
+
+	priv->enabled = true;
+}
+
+static void led_bl_power_off(struct led_bl_data *priv)
+{
+	int i;
+
+	if (!priv->enabled)
+		return;
+
+	for (i = 0; i < priv->nb_leds; i++)
+		led_set_brightness(priv->leds[i], LED_OFF);
+
+	priv->enabled = false;
+}
+
+static int led_bl_update_status(struct backlight_device *bl)
+{
+	struct led_bl_data *priv = bl_get_data(bl);
+	int brightness = bl->props.brightness;
+
+	if (bl->props.power != FB_BLANK_UNBLANK ||
+	    bl->props.fb_blank != FB_BLANK_UNBLANK ||
+	    bl->props.state & BL_CORE_FBBLANK)
+		brightness = 0;
+
+	if (brightness > 0)
+		led_bl_set_brightness(priv, brightness);
+	else
+		led_bl_power_off(priv);
+
+	return 0;
+}
+
+static const struct backlight_ops led_bl_ops = {
+	.update_status	= led_bl_update_status,
+};
+
+static int led_bl_get_leds(struct device *dev,
+			   struct led_bl_data *priv)
+{
+	int i, nb_leds, ret;
+	struct device_node *node = dev->of_node;
+	struct led_classdev **leds;
+	unsigned int max_brightness;
+	unsigned int default_brightness;
+
+	ret = of_count_phandle_with_args(node, "leds", NULL);
+	if (ret < 0) {
+		dev_err(dev, "Unable to get led count\n");
+		return -EINVAL;
+	}
+
+	nb_leds = ret;
+	if (nb_leds < 1) {
+		dev_err(dev, "At least one LED must be specified!\n");
+		return -EINVAL;
+	}
+
+	leds = devm_kzalloc(dev, sizeof(struct led_classdev *) * nb_leds,
+			    GFP_KERNEL);
+	if (!leds)
+		return -ENOMEM;
+
+	for (i = 0; i < nb_leds; i++) {
+		leds[i] = devm_led_get(dev, i);
+		if (IS_ERR(leds[i]))
+			return PTR_ERR(leds[i]);
+	}
+
+	/* check that the LEDs all have the same brightness range */
+	max_brightness = leds[0]->max_brightness;
+	for (i = 1; i < nb_leds; i++) {
+		if (max_brightness != leds[i]->max_brightness) {
+			dev_err(dev, "LEDs must have identical ranges\n");
+			return -EINVAL;
+		}
+	}
+
+	/* get the default brightness from the first LED from the list */
+	default_brightness = leds[0]->brightness;
+
+	priv->nb_leds = nb_leds;
+	priv->leds = leds;
+	priv->max_brightness = max_brightness;
+	priv->default_brightness = default_brightness;
+
+	return 0;
+}
+
+static int led_bl_parse_levels(struct device *dev,
+			   struct led_bl_data *priv)
+{
+	struct device_node *node = dev->of_node;
+	int num_levels;
+	u32 value;
+	int ret;
+
+	if (!node)
+		return -ENODEV;
+
+	num_levels = of_property_count_u32_elems(node, "brightness-levels");
+	if (num_levels > 1) {
+		int i;
+		unsigned int db;
+		u32 *levels = NULL;
+
+		levels = devm_kzalloc(dev, sizeof(u32) * num_levels,
+				      GFP_KERNEL);
+		if (!levels)
+			return -ENOMEM;
+
+		ret = of_property_read_u32_array(node, "brightness-levels",
+						levels,
+						num_levels);
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * Try to map actual LED brightness to backlight brightness
+		 * level
+		 */
+		db = priv->default_brightness;
+		for (i = 0 ; i < num_levels; i++) {
+			if ((i && db > levels[i-1]) && db <= levels[i])
+				break;
+		}
+		priv->default_brightness = i;
+		priv->max_brightness = num_levels - 1;
+		priv->levels = levels;
+	} else if (num_levels >= 0)
+		dev_warn(dev, "Not enough levels defined\n");
+
+	ret = of_property_read_u32(node, "default-brightness-level", &value);
+	if (!ret && value <= priv->max_brightness)
+		priv->default_brightness = value;
+	else if (!ret  && value > priv->max_brightness)
+		dev_warn(dev, "Invalid default brightness. Ignoring it\n");
+
+	return 0;
+}
+
+static int led_bl_probe(struct platform_device *pdev)
+{
+	struct backlight_properties props;
+	struct led_bl_data *priv;
+	int ret, i;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	priv->dev = &pdev->dev;
+
+	ret = led_bl_get_leds(&pdev->dev, priv);
+	if (ret)
+		return ret;
+
+	ret = led_bl_parse_levels(&pdev->dev, priv);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to parse DT data\n");
+		return ret;
+	}
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = priv->max_brightness;
+	props.brightness = priv->default_brightness;
+	props.power = (priv->default_brightness > 0) ? FB_BLANK_POWERDOWN :
+		      FB_BLANK_UNBLANK;
+	priv->bl_dev = backlight_device_register(dev_name(&pdev->dev),
+			&pdev->dev, priv, &led_bl_ops, &props);
+	if (IS_ERR(priv->bl_dev)) {
+		dev_err(&pdev->dev, "Failed to register backlight\n");
+		return PTR_ERR(priv->bl_dev);
+	}
+
+	for (i = 0; i < priv->nb_leds; i++)
+		led_sysfs_disable(priv->leds[i]);
+
+	backlight_update_status(priv->bl_dev);
+
+	return 0;
+}
+
+static int led_bl_remove(struct platform_device *pdev)
+{
+	struct led_bl_data *priv = platform_get_drvdata(pdev);
+	struct backlight_device *bl = priv->bl_dev;
+	int i;
+
+	backlight_device_unregister(bl);
+
+	led_bl_power_off(priv);
+	for (i = 0; i < priv->nb_leds; i++)
+		led_sysfs_enable(priv->leds[i]);
+
+	return 0;
+}
+
+static const struct of_device_id led_bl_of_match[] = {
+	{ .compatible = "led-backlight" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, led_bl_of_match);
+
+static struct platform_driver led_bl_driver = {
+	.driver		= {
+		.name		= "led-backlight",
+		.of_match_table	= of_match_ptr(led_bl_of_match),
+	},
+	.probe		= led_bl_probe,
+	.remove		= led_bl_remove,
+};
+
+module_platform_driver(led_bl_driver);
+
+MODULE_DESCRIPTION("LED based Backlight Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:led-backlight");
-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v5 4/4] backlight: add led-backlight driver
  2019-09-10 10:59 ` [PATCH v5 4/4] backlight: add led-backlight driver Jean-Jacques Hiblot
@ 2019-09-10 11:26   ` Daniel Thompson
  2019-09-10 11:38     ` Jean-Jacques Hiblot
  0 siblings, 1 reply; 9+ messages in thread
From: Daniel Thompson @ 2019-09-10 11:26 UTC (permalink / raw)
  To: Jean-Jacques Hiblot
  Cc: jacek.anaszewski, pavel, robh+dt, mark.rutland, lee.jones,
	dmurphy, linux-leds, linux-kernel, dridevel, tomi.valkeinen

On Tue, Sep 10, 2019 at 12:59:46PM +0200, Jean-Jacques Hiblot wrote:
> From: Tomi Valkeinen <tomi.valkeinen@ti.com>
> 
> This patch adds a led-backlight driver (led_bl), which is similar to
> pwm_bl except the driver uses a LED class driver to adjust the
> brightness in the HW. Multiple LEDs can be used for a single backlight.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> Acked-by: Pavel Machek <pavel@ucw.cz>
> ---
>  drivers/video/backlight/Kconfig  |   7 +
>  drivers/video/backlight/Makefile |   1 +
>  drivers/video/backlight/led_bl.c | 264 +++++++++++++++++++++++++++++++
>  3 files changed, 272 insertions(+)
>  create mode 100644 drivers/video/backlight/led_bl.c
> 
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 8b081d61773e..585a1787618c 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -458,6 +458,13 @@ config BACKLIGHT_RAVE_SP
>  	help
>  	  Support for backlight control on RAVE SP device.
>  
> +config BACKLIGHT_LED
> +	tristate "Generic LED based Backlight Driver"
> +	depends on LEDS_CLASS && OF
> +	help
> +	  If you have a LCD backlight adjustable by LED class driver, say Y
> +	  to enable this driver.
> +
>  endif # BACKLIGHT_CLASS_DEVICE
>  
>  endmenu
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index 63c507c07437..2a67642966a5 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -57,3 +57,4 @@ obj-$(CONFIG_BACKLIGHT_TPS65217)	+= tps65217_bl.o
>  obj-$(CONFIG_BACKLIGHT_WM831X)		+= wm831x_bl.o
>  obj-$(CONFIG_BACKLIGHT_ARCXCNN) 	+= arcxcnn_bl.o
>  obj-$(CONFIG_BACKLIGHT_RAVE_SP)		+= rave-sp-backlight.o
> +obj-$(CONFIG_BACKLIGHT_LED)		+= led_bl.o
> diff --git a/drivers/video/backlight/led_bl.c b/drivers/video/backlight/led_bl.c
> new file mode 100644
> index 000000000000..a72456e11fb9
> --- /dev/null
> +++ b/drivers/video/backlight/led_bl.c
> @@ -0,0 +1,264 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2015-2019 Texas Instruments Incorporated -  http://www.ti.com/
> + * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
> + *
> + * Based on pwm_bl.c
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/gpio/consumer.h>

Maybe this is a nitpick but it is one I have now raised three times and
I don't recall any response, what symbols from this header are used in
this file?

AFAICT everything defined in this header includes the string "gpio" and
that string doesn't appear anywhere in the file (except this line).


> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>

Come to think of it, are you sure you need this include? devm_kzalloc()
doesn't comes from this file.


> +#define BKL_FULL_BRIGHTNESS 255

This is unused. Please remove.


Other than that, looks good!


Daniel.

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v5 3/4] dt-bindings: backlight: Add led-backlight binding
  2019-09-10 10:59 ` [PATCH v5 3/4] dt-bindings: backlight: Add led-backlight binding Jean-Jacques Hiblot
@ 2019-09-10 11:26   ` Daniel Thompson
  0 siblings, 0 replies; 9+ messages in thread
From: Daniel Thompson @ 2019-09-10 11:26 UTC (permalink / raw)
  To: Jean-Jacques Hiblot
  Cc: jacek.anaszewski, pavel, robh+dt, mark.rutland, lee.jones,
	dmurphy, linux-leds, linux-kernel, dridevel, tomi.valkeinen

On Tue, Sep 10, 2019 at 12:59:45PM +0200, Jean-Jacques Hiblot wrote:
> Add DT binding for led-backlight.
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>

Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>

> ---
>  .../bindings/leds/backlight/led-backlight.txt | 28 +++++++++++++++++++
>  1 file changed, 28 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
> new file mode 100644
> index 000000000000..4c7dfbe7f67a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
> @@ -0,0 +1,28 @@
> +led-backlight bindings
> +
> +This binding is used to describe a basic backlight device made of LEDs.
> +It can also be used to describe a backlight device controlled by the output of
> +a LED driver.
> +
> +Required properties:
> +  - compatible: "led-backlight"
> +  - leds: a list of LEDs
> +
> +Optional properties:
> +  - brightness-levels: Array of distinct brightness levels. The levels must be
> +                       in the range accepted by the underlying LED devices.
> +                       This is used to translate a backlight brightness level
> +                       into a LED brightness level. If it is not provided, the
> +                       identity mapping is used.
> +
> +  - default-brightness-level: The default brightness level.
> +
> +Example:
> +
> +	backlight {
> +		compatible = "led-backlight";
> +
> +		leds = <&led1>, <&led2>;
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <6>;
> +	};
> -- 
> 2.17.1
> 

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v5 4/4] backlight: add led-backlight driver
  2019-09-10 11:26   ` Daniel Thompson
@ 2019-09-10 11:38     ` Jean-Jacques Hiblot
  2019-09-10 11:39       ` Daniel Thompson
  0 siblings, 1 reply; 9+ messages in thread
From: Jean-Jacques Hiblot @ 2019-09-10 11:38 UTC (permalink / raw)
  To: Daniel Thompson
  Cc: jacek.anaszewski, pavel, robh+dt, mark.rutland, lee.jones,
	dmurphy, linux-leds, linux-kernel, dridevel, tomi.valkeinen


On 10/09/2019 13:26, Daniel Thompson wrote:
>
>>   endmenu
>> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
>> index 63c507c07437..2a67642966a5 100644
>> --- a/drivers/video/backlight/Makefile
>> +++ b/drivers/video/backlight/Makefile
>> @@ -57,3 +57,4 @@ obj-$(CONFIG_BACKLIGHT_TPS65217)	+= tps65217_bl.o
>>   obj-$(CONFIG_BACKLIGHT_WM831X)		+= wm831x_bl.o
>>   obj-$(CONFIG_BACKLIGHT_ARCXCNN) 	+= arcxcnn_bl.o
>>   obj-$(CONFIG_BACKLIGHT_RAVE_SP)		+= rave-sp-backlight.o
>> +obj-$(CONFIG_BACKLIGHT_LED)		+= led_bl.o
>> diff --git a/drivers/video/backlight/led_bl.c b/drivers/video/backlight/led_bl.c
>> new file mode 100644
>> index 000000000000..a72456e11fb9
>> --- /dev/null
>> +++ b/drivers/video/backlight/led_bl.c
>> @@ -0,0 +1,264 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2015-2019 Texas Instruments Incorporated -  http://www.ti.com/
>> + * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
>> + *
>> + * Based on pwm_bl.c
>> + */
>> +
>> +#include <linux/backlight.h>
>> +#include <linux/gpio/consumer.h>
> Maybe this is a nitpick but it is one I have now raised three times and
> I don't recall any response, what symbols from this header are used in
> this file?
>
> AFAICT everything defined in this header includes the string "gpio" and
> that string doesn't appear anywhere in the file (except this line).
>
>
>> +#include <linux/leds.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
> Come to think of it, are you sure you need this include? devm_kzalloc()
> doesn't comes from this file.
>
>
>> +#define BKL_FULL_BRIGHTNESS 255
> This is unused. Please remove.
>
>
> Other than that, looks good!

Thanks for the quick review. I forgot to cleanup the headers. I'll fix 
that now

JJ

>
>
> Daniel.

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v5 4/4] backlight: add led-backlight driver
  2019-09-10 11:38     ` Jean-Jacques Hiblot
@ 2019-09-10 11:39       ` Daniel Thompson
  0 siblings, 0 replies; 9+ messages in thread
From: Daniel Thompson @ 2019-09-10 11:39 UTC (permalink / raw)
  To: Jean-Jacques Hiblot
  Cc: jacek.anaszewski, pavel, robh+dt, mark.rutland, lee.jones,
	dmurphy, linux-leds, linux-kernel, dridevel, tomi.valkeinen

On Tue, Sep 10, 2019 at 01:38:18PM +0200, Jean-Jacques Hiblot wrote:
> 
> On 10/09/2019 13:26, Daniel Thompson wrote:
> > 
> > >   endmenu
> > > diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> > > index 63c507c07437..2a67642966a5 100644
> > > --- a/drivers/video/backlight/Makefile
> > > +++ b/drivers/video/backlight/Makefile
> > > @@ -57,3 +57,4 @@ obj-$(CONFIG_BACKLIGHT_TPS65217)	+= tps65217_bl.o
> > >   obj-$(CONFIG_BACKLIGHT_WM831X)		+= wm831x_bl.o
> > >   obj-$(CONFIG_BACKLIGHT_ARCXCNN) 	+= arcxcnn_bl.o
> > >   obj-$(CONFIG_BACKLIGHT_RAVE_SP)		+= rave-sp-backlight.o
> > > +obj-$(CONFIG_BACKLIGHT_LED)		+= led_bl.o
> > > diff --git a/drivers/video/backlight/led_bl.c b/drivers/video/backlight/led_bl.c
> > > new file mode 100644
> > > index 000000000000..a72456e11fb9
> > > --- /dev/null
> > > +++ b/drivers/video/backlight/led_bl.c
> > > @@ -0,0 +1,264 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Copyright (C) 2015-2019 Texas Instruments Incorporated -  http://www.ti.com/
> > > + * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
> > > + *
> > > + * Based on pwm_bl.c
> > > + */
> > > +
> > > +#include <linux/backlight.h>
> > > +#include <linux/gpio/consumer.h>
> > Maybe this is a nitpick but it is one I have now raised three times and
> > I don't recall any response, what symbols from this header are used in
> > this file?
> > 
> > AFAICT everything defined in this header includes the string "gpio" and
> > that string doesn't appear anywhere in the file (except this line).
> > 
> > 
> > > +#include <linux/leds.h>
> > > +#include <linux/module.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/slab.h>
> > Come to think of it, are you sure you need this include? devm_kzalloc()
> > doesn't comes from this file.
> > 
> > 
> > > +#define BKL_FULL_BRIGHTNESS 255
> > This is unused. Please remove.
> > 
> > 
> > Other than that, looks good!
> 
> Thanks for the quick review. I forgot to cleanup the headers. I'll fix that
> now

I felt I owed it to this patch series after my performance so far this
dev cycle!


Daniel.

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-10 10:59 [PATCH v5 0/4] Add a generic driver for LED-based backlight Jean-Jacques Hiblot
2019-09-10 10:59 ` [PATCH v5 1/4] leds: Add of_led_get() and led_put() Jean-Jacques Hiblot
2019-09-10 10:59 ` [PATCH v5 2/4] leds: Add managed API to get a LED from a device driver Jean-Jacques Hiblot
2019-09-10 10:59 ` [PATCH v5 3/4] dt-bindings: backlight: Add led-backlight binding Jean-Jacques Hiblot
2019-09-10 11:26   ` Daniel Thompson
2019-09-10 10:59 ` [PATCH v5 4/4] backlight: add led-backlight driver Jean-Jacques Hiblot
2019-09-10 11:26   ` Daniel Thompson
2019-09-10 11:38     ` Jean-Jacques Hiblot
2019-09-10 11:39       ` Daniel Thompson

Linux-LEDs Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-leds/0 linux-leds/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-leds linux-leds/ https://lore.kernel.org/linux-leds \
		linux-leds@vger.kernel.org linux-leds@archiver.kernel.org
	public-inbox-index linux-leds


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-leds


AGPL code for this site: git clone https://public-inbox.org/ public-inbox