From: Sven Van Asbroeck <thesven73@gmail.com>
To: Lee Jones <lee.jones@linaro.org>, Pavel Machek <pavel@ucw.cz>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Grigoryev Denis <grigoryev@fastwel.ru>,
Axel Lin <axel.lin@ingics.com>,
Jacek Anaszewski <jacek.anaszewski@gmail.com>,
Dan Murphy <dmurphy@ti.com>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-leds@vger.kernel.org
Subject: [PATCH v6 1/2] leds: tps6105x: add driver for MFD chip LED mode
Date: Mon, 16 Dec 2019 09:32:58 -0500 [thread overview]
Message-ID: <20191216143259.24587-2-TheSven73@gmail.com> (raw)
In-Reply-To: <20191216143259.24587-1-TheSven73@gmail.com>
This driver adds support for the LED operational mode of the
tps6105x MFD device.
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
---
drivers/leds/Kconfig | 10 ++++
drivers/leds/Makefile | 1 +
drivers/leds/leds-tps6105x.c | 89 ++++++++++++++++++++++++++++++++++++
3 files changed, 100 insertions(+)
create mode 100644 drivers/leds/leds-tps6105x.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 4b68520ac251..d82f1dea3711 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -836,6 +836,16 @@ config LEDS_LM36274
Say Y to enable the LM36274 LED driver for TI LMU devices.
This supports the LED device LM36274.
+config LEDS_TPS6105X
+ tristate "LED support for TI TPS6105X"
+ depends on LEDS_CLASS
+ depends on TPS6105X
+ default y if TPS6105X
+ help
+ This driver supports TPS61050/TPS61052 LED chips.
+ It is a single boost converter primarily for white LEDs and
+ audio amplifiers.
+
comment "LED Triggers"
source "drivers/leds/trigger/Kconfig"
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2da39e896ce8..d7e1107753fb 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -85,6 +85,7 @@ obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o
obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o
obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o
obj-$(CONFIG_LEDS_LM36274) += leds-lm36274.o
+obj-$(CONFIG_LEDS_TPS6105X) += leds-tps6105x.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
diff --git a/drivers/leds/leds-tps6105x.c b/drivers/leds/leds-tps6105x.c
new file mode 100644
index 000000000000..09fd88a6c8f0
--- /dev/null
+++ b/drivers/leds/leds-tps6105x.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 Sven Van Asbroeck
+ */
+
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/tps6105x.h>
+#include <linux/regmap.h>
+
+struct tps6105x_priv {
+ struct regmap *regmap;
+ struct led_classdev cdev;
+ struct fwnode_handle *fwnode;
+};
+
+static void tps6105x_handle_put(void *data)
+{
+ struct tps6105x_priv *priv = data;
+
+ fwnode_handle_put(priv->fwnode);
+}
+
+static int tps6105x_brightness_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct tps6105x_priv *priv = container_of(cdev, struct tps6105x_priv,
+ cdev);
+
+ return regmap_update_bits(priv->regmap, TPS6105X_REG_0,
+ TPS6105X_REG0_TORCHC_MASK,
+ brightness << TPS6105X_REG0_TORCHC_SHIFT);
+}
+
+static int tps6105x_led_probe(struct platform_device *pdev)
+{
+ struct tps6105x *tps6105x = dev_get_platdata(&pdev->dev);
+ struct tps6105x_platform_data *pdata = tps6105x->pdata;
+ struct led_init_data init_data = { };
+ struct tps6105x_priv *priv;
+ int ret;
+
+ /* This instance is not set for torch mode so bail out */
+ if (pdata->mode != TPS6105X_MODE_TORCH) {
+ dev_info(&pdev->dev,
+ "chip not in torch mode, exit probe");
+ return -EINVAL;
+ }
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ /* fwnode/devicetree is optional. NULL is allowed for priv->fwnode */
+ priv->fwnode = device_get_next_child_node(pdev->dev.parent, NULL);
+ ret = devm_add_action_or_reset(&pdev->dev, tps6105x_handle_put, priv);
+ if (ret)
+ return ret;
+ priv->regmap = tps6105x->regmap;
+ priv->cdev.brightness_set_blocking = tps6105x_brightness_set;
+ priv->cdev.max_brightness = 7;
+ init_data.devicename = "tps6105x";
+ init_data.default_label = ":torch";
+ init_data.fwnode = priv->fwnode;
+
+ ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
+ TPS6105X_REG0_MODE_MASK |
+ TPS6105X_REG0_TORCHC_MASK,
+ TPS6105X_REG0_MODE_TORCH <<
+ TPS6105X_REG0_MODE_SHIFT);
+ if (ret)
+ return ret;
+
+ return devm_led_classdev_register_ext(&pdev->dev, &priv->cdev,
+ &init_data);
+}
+
+static struct platform_driver led_driver = {
+ .probe = tps6105x_led_probe,
+ .driver = {
+ .name = "tps6105x-leds",
+ },
+};
+
+module_platform_driver(led_driver);
+
+MODULE_DESCRIPTION("TPS6105x LED driver");
+MODULE_AUTHOR("Sven Van Asbroeck <TheSven73@gmail.com>");
+MODULE_LICENSE("GPL v2");
--
2.17.1
next prev parent reply other threads:[~2019-12-16 14:33 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-16 14:32 [PATCH v6 0/2] tps6105x add devicetree and leds support Sven Van Asbroeck
2019-12-16 14:32 ` Sven Van Asbroeck [this message]
2019-12-21 19:04 ` [PATCH v6 1/2] leds: tps6105x: add driver for MFD chip LED mode Pavel Machek
2019-12-16 14:32 ` [PATCH v6 2/2] dt-bindings: mfd: update TI tps6105x chip bindings Sven Van Asbroeck
2019-12-16 16:38 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191216143259.24587-2-TheSven73@gmail.com \
--to=thesven73@gmail.com \
--cc=axel.lin@ingics.com \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=grigoryev@fastwel.ru \
--cc=jacek.anaszewski@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).