[PATCH AUTOSEL 6.1 06/29] m68k: mm: Fix systems with memory at end of 32-bit address space

[PATCH AUTOSEL 6.1 06/29] m68k: mm: Fix systems with memory at end of 32-bit address space

[Sasha Levin]

From: Kars de Jong <jongk@linux-m68k.org>

[ Upstream commit 0d9fad91abfd723ea5070a46d98a9f4496c93ba9 ]

The calculation of end addresses of memory chunks overflowed to 0 when
a memory chunk is located at the end of 32-bit address space.
This is the case for the HP300 architecture.

Link: https://lore.kernel.org/linux-m68k/CACz-3rhUo5pgNwdWHaPWmz+30Qo9xCg70wNxdf7o5x-6tXq8QQ@mail.gmail.com/
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230223112349.26675-1-jongk@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/mm/motorola.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 2a375637e0077..9113012240789 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -437,7 +437,7 @@ void __init paging_init(void)
 	}
 
 	min_addr = m68k_memory[0].addr;
-	max_addr = min_addr + m68k_memory[0].size;
+	max_addr = min_addr + m68k_memory[0].size - 1;
 	memblock_add_node(m68k_memory[0].addr, m68k_memory[0].size, 0,
 			  MEMBLOCK_NONE);
 	for (i = 1; i < m68k_num_memory;) {
@@ -452,21 +452,21 @@ void __init paging_init(void)
 		}
 		memblock_add_node(m68k_memory[i].addr, m68k_memory[i].size, i,
 				  MEMBLOCK_NONE);
-		addr = m68k_memory[i].addr + m68k_memory[i].size;
+		addr = m68k_memory[i].addr + m68k_memory[i].size - 1;
 		if (addr > max_addr)
 			max_addr = addr;
 		i++;
 	}
 	m68k_memoffset = min_addr - PAGE_OFFSET;
-	m68k_virt_to_node_shift = fls(max_addr - min_addr - 1) - 6;
+	m68k_virt_to_node_shift = fls(max_addr - min_addr) - 6;
 
 	module_fixup(NULL, __start_fixup, __stop_fixup);
 	flush_icache();
 
-	high_memory = phys_to_virt(max_addr);
+	high_memory = phys_to_virt(max_addr) + 1;
 
 	min_low_pfn = availmem >> PAGE_SHIFT;
-	max_pfn = max_low_pfn = max_addr >> PAGE_SHIFT;
+	max_pfn = max_low_pfn = (max_addr >> PAGE_SHIFT) + 1;
 
 	/* Reserve kernel text/data/bss and the memory allocated in head.S */
 	memblock_reserve(m68k_memory[0].addr, availmem - m68k_memory[0].addr);
-- 
2.39.2

[PATCH AUTOSEL 6.1 07/29] m68k: Only force 030 bus error if PC not in exception table

[Sasha Levin]

From: Michael Schmitz <schmitzmic@gmail.com>

[ Upstream commit e36a82bebbf7da814530d5a179bef9df5934b717 ]

__get_kernel_nofault() does copy data in supervisor mode when
forcing a task backtrace log through /proc/sysrq_trigger.
This is expected cause a bus error exception on e.g. NULL
pointer dereferencing when logging a kernel task has no
workqueue associated. This bus error ought to be ignored.

Our 030 bus error handler is ill equipped to deal with this:

Whenever ssw indicates a kernel mode access on a data fault,
we don't even attempt to handle the fault and instead always
send a SEGV signal (or panic). As a result, the check
for exception handling at the fault PC (buried in
send_sig_fault() which gets called from do_page_fault()
eventually) is never used.

In contrast, both 040 and 060 access error handlers do not
care whether a fault happened on supervisor mode access,
and will call do_page_fault() on those, ultimately honoring
the exception table.

Add a check in bus_error030 to call do_page_fault() in case
we do have an entry for the fault PC in our exception table.

I had attempted a fix for this earlier in 2019 that did rely
on testing pagefault_disabled() (see link below) to achieve
the same thing, but this patch should be more generic.

Tested on 030 Atari Falcon.

Reported-by: Eero Tamminen <oak@helsinkinet.fi>
Link: https://lore.kernel.org/r/alpine.LNX.2.21.1904091023540.25@nippy.intranet
Link: https://lore.kernel.org/r/63130691-1984-c423-c1f2-73bfd8d3dcd3@gmail.com
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230301021107.26307-1-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/kernel/traps.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index 5c8cba0efc63e..a700807c9b6d9 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <linux/init.h>
 #include <linux/ptrace.h>
 #include <linux/kallsyms.h>
+#include <linux/extable.h>
 
 #include <asm/setup.h>
 #include <asm/fpu.h>
@@ -545,7 +546,8 @@ static inline void bus_error030 (struct frame *fp)
 			errorcode |= 2;
 
 		if (mmusr & (MMU_I | MMU_WP)) {
-			if (ssw & 4) {
+			/* We might have an exception table for this PC */
+			if (ssw & 4 && !search_exception_tables(fp->ptregs.pc)) {
 				pr_err("Data %s fault at %#010lx in %s (pc=%#lx)\n",
 				       ssw & RW ? "read" : "write",
 				       fp->un.fmtb.daddr,
-- 
2.39.2