* [PATCH] man4/*: ffix, change '-' to '\-' for options
@ 2020-07-01 23:01 Bjarni Ingi Gislason
2020-07-02 10:27 ` Michael Kerrisk (man-pages)
0 siblings, 1 reply; 2+ messages in thread
From: Bjarni Ingi Gislason @ 2020-07-01 23:01 UTC (permalink / raw)
To: mtk.manpages; +Cc: linux-man
Change '-' to '\-' for the prefix of names to indicate an option.
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
---
man4/cciss.4 | 4 ++--
man4/loop.4 | 2 +-
man4/veth.4 | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/man4/cciss.4 b/man4/cciss.4
index 9600c8f6f..d5732f168 100644
--- a/man4/cciss.4
+++ b/man4/cciss.4
@@ -140,7 +140,7 @@ For example:
.in +4n
.EX
$ \fBcd /proc/driver/cciss\fP
-$ \fBls -l\fP
+$ \fBls \-l\fP
total 0
-rw-r--r-- 1 root root 0 2010\-09\-10 10:38 cciss0
-rw-r--r-- 1 root root 0 2010\-09\-10 10:38 cciss1
@@ -360,7 +360,7 @@ successfully reset or the tardy command is successfully aborted, the
tape drive may still not allow I/O to continue until some command
is issued that positions the tape to a known position.
Typically you must rewind the tape (by issuing
-.I "mt -f /dev/st0 rewind"
+.I "mt \-f /dev/st0 rewind"
for example) before I/O can proceed again to a tape drive that was reset.
.SH SEE ALSO
.BR hpsa (4),
diff --git a/man4/loop.4 b/man4/loop.4
index 1623cad0e..41e13d16f 100644
--- a/man4/loop.4
+++ b/man4/loop.4
@@ -43,7 +43,7 @@ You could do
.EX
$ \fBdd if=/dev/zero of=file.img bs=1MiB count=10\fP
$ \fBsudo losetup /dev/loop4 file.img\fP
-$ \fBsudo mkfs -t ext4 /dev/loop4\fP
+$ \fBsudo mkfs \-t ext4 /dev/loop4\fP
$ \fBsudo mkdir /myloopdev\fP
$ \fBsudo mount /dev/loop4 /myloopdev\fP
.EE
diff --git a/man4/veth.4 b/man4/veth.4
index e5d11b2b6..1fdc7822e 100644
--- a/man4/veth.4
+++ b/man4/veth.4
@@ -91,7 +91,7 @@ network interface, using commands something like:
.in +4n
.EX
# \fBip link add ve_A type veth peer name ve_B\fP # Create veth pair
-# \fBethtool -S ve_A\fP # Discover interface index of peer
+# \fBethtool \-S ve_A\fP # Discover interface index of peer
NIC statistics:
peer_ifindex: 16
# \fBip link | grep '^16:'\fP # Look up interface
--
2.27.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] man4/*: ffix, change '-' to '\-' for options
2020-07-01 23:01 [PATCH] man4/*: ffix, change '-' to '\-' for options Bjarni Ingi Gislason
@ 2020-07-02 10:27 ` Michael Kerrisk (man-pages)
0 siblings, 0 replies; 2+ messages in thread
From: Michael Kerrisk (man-pages) @ 2020-07-02 10:27 UTC (permalink / raw)
To: Bjarni Ingi Gislason; +Cc: mtk.manpages, linux-man
On 7/2/20 1:01 AM, Bjarni Ingi Gislason wrote:
> Change '-' to '\-' for the prefix of names to indicate an option.
Thanks! Patch applied,
Cheers,
Michael
> Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
> ---
> man4/cciss.4 | 4 ++--
> man4/loop.4 | 2 +-
> man4/veth.4 | 2 +-
> 3 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/man4/cciss.4 b/man4/cciss.4
> index 9600c8f6f..d5732f168 100644
> --- a/man4/cciss.4
> +++ b/man4/cciss.4
> @@ -140,7 +140,7 @@ For example:
> .in +4n
> .EX
> $ \fBcd /proc/driver/cciss\fP
> -$ \fBls -l\fP
> +$ \fBls \-l\fP
> total 0
> -rw-r--r-- 1 root root 0 2010\-09\-10 10:38 cciss0
> -rw-r--r-- 1 root root 0 2010\-09\-10 10:38 cciss1
> @@ -360,7 +360,7 @@ successfully reset or the tardy command is successfully aborted, the
> tape drive may still not allow I/O to continue until some command
> is issued that positions the tape to a known position.
> Typically you must rewind the tape (by issuing
> -.I "mt -f /dev/st0 rewind"
> +.I "mt \-f /dev/st0 rewind"
> for example) before I/O can proceed again to a tape drive that was reset.
> .SH SEE ALSO
> .BR hpsa (4),
> diff --git a/man4/loop.4 b/man4/loop.4
> index 1623cad0e..41e13d16f 100644
> --- a/man4/loop.4
> +++ b/man4/loop.4
> @@ -43,7 +43,7 @@ You could do
> .EX
> $ \fBdd if=/dev/zero of=file.img bs=1MiB count=10\fP
> $ \fBsudo losetup /dev/loop4 file.img\fP
> -$ \fBsudo mkfs -t ext4 /dev/loop4\fP
> +$ \fBsudo mkfs \-t ext4 /dev/loop4\fP
> $ \fBsudo mkdir /myloopdev\fP
> $ \fBsudo mount /dev/loop4 /myloopdev\fP
> .EE
> diff --git a/man4/veth.4 b/man4/veth.4
> index e5d11b2b6..1fdc7822e 100644
> --- a/man4/veth.4
> +++ b/man4/veth.4
> @@ -91,7 +91,7 @@ network interface, using commands something like:
> .in +4n
> .EX
> # \fBip link add ve_A type veth peer name ve_B\fP # Create veth pair
> -# \fBethtool -S ve_A\fP # Discover interface index of peer
> +# \fBethtool \-S ve_A\fP # Discover interface index of peer
> NIC statistics:
> peer_ifindex: 16
> # \fBip link | grep '^16:'\fP # Look up interface
>
--
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-07-02 10:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-01 23:01 [PATCH] man4/*: ffix, change '-' to '\-' for options Bjarni Ingi Gislason
2020-07-02 10:27 ` Michael Kerrisk (man-pages)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).