From: Hans Verkuil <hverkuil@xs4all.nl>
To: Marco Felsch <m.felsch@pengutronix.de>,
mchehab@kernel.org, sakari.ailus@linux.intel.com,
hans.verkuil@cisco.com, jacopo+renesas@jmondi.org,
robh+dt@kernel.org, laurent.pinchart@ideasonboard.com
Cc: devicetree@vger.kernel.org, kernel@pengutronix.de,
linux-media@vger.kernel.org
Subject: Re: [PATCH v10 08/14] media: tvp5150: add FORMAT_TRY support for get/set selection handlers
Date: Fri, 27 Sep 2019 11:01:35 +0200 [thread overview]
Message-ID: <05b9b16f-dcd6-b76b-7e37-c246f4465515@xs4all.nl> (raw)
In-Reply-To: <20190830101646.6530-9-m.felsch@pengutronix.de>
On 8/30/19 12:16 PM, Marco Felsch wrote:
> Since commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops")
> the 'which' field for set/get_selection must be FORMAT_ACTIVE. There is
> no way to try different selections. The patch adds a helper function to
> select the correct selection memory space (sub-device file handle or
> driver state) which will be set/returned.
>
> The selection rectangle is updated if the format is FORMAT_ACTIVE and
> the rectangle position and/or size differs from the current set
> rectangle.
>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
One checkpatch warning:
CHECK: Alignment should match open parenthesis
#170: FILE: drivers/media/i2c/tvp5150.c:1155:
+ crop = __tvp5150_get_pad_crop(decoder, cfg, sel->pad,
+ sel->which);
I'd have fixed this myself, but since there are some changes needed
elsewhere, you can pick this up as well for a v11.
And some more comments below:
> ---
> Changelog:
>
> v10:
> - __tvp5150_get_pad_crop: drop confusing fall-through
> - set_selection: fix FORMAT_TRY handling if CONFIG_VIDEO_V4L2_SUBDEV_API
> is disabled. Adapt sel->r and return 0.
> v8:
> - adapt commit message
> - remove wrong FORMAT_TRY handling for tvp5150_fill_fmt() handling
> - return 0 during set_selection if FORMAT_TRY was requested and
> CONFIG_VIDEO_V4L2_SUBDEV_API is disabled
> - return -EINVAL during get_selection if FORMAT_TRY was requested and
> CONFIG_VIDEO_V4L2_SUBDEV_API is disabled
> v7:
> - __tvp5150_get_pad_crop(): return error on default case
> - simplify __tvp5150_get_pad_crop() error handling
> - tvp5150_set_selection() squash __tvp5150_set_selection() execution
> conditions
> v6:
> nothing
> v5:
> - handle stub for v4l2_subdev_get_try_crop() internal since commit
> ("media: v4l2-subdev: add stubs for v4l2_subdev_get_try_*")
> isn't anymore part of this series.
> - add error handling of __tvp5150_get_pad_crop()
> v4:
> - fix merge conflict due to rebase on top of media-tree/master
> - __tvp5150_get_pad_crop(): cosmetic alignment fixes
>
> drivers/media/i2c/tvp5150.c | 113 ++++++++++++++++++++++++++----------
> 1 file changed, 81 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> index c1542a89e8c8..636e8737ac44 100644
> --- a/drivers/media/i2c/tvp5150.c
> +++ b/drivers/media/i2c/tvp5150.c
> @@ -19,6 +19,7 @@
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-fwnode.h>
> #include <media/v4l2-mc.h>
> +#include <media/v4l2-rect.h>
>
> #include "tvp5150_reg.h"
>
> @@ -995,6 +996,25 @@ static void tvp5150_set_default(v4l2_std_id std, struct v4l2_rect *crop)
> crop->height = TVP5150_V_MAX_OTHERS;
> }
>
> +static struct v4l2_rect *
> +__tvp5150_get_pad_crop(struct tvp5150 *decoder,
> + struct v4l2_subdev_pad_config *cfg, unsigned int pad,
> + enum v4l2_subdev_format_whence which)
Please don't use __ in the function name. Double underscores should never be
used in C code since that's reserved for use by the compiler. What's wrong
with just plain tvp5150_get_pad_crop()?
> +{
> + switch (which) {
> + case V4L2_SUBDEV_FORMAT_ACTIVE:
> + return &decoder->rect;
> + case V4L2_SUBDEV_FORMAT_TRY:
> +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
> + return v4l2_subdev_get_try_crop(&decoder->sd, cfg, pad);
> +#else
> + return ERR_PTR(-EINVAL);
> +#endif
> + default:
> + return ERR_PTR(-EINVAL);
> + }
> +}
> +
> static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
> struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_format *format)
> @@ -1019,17 +1039,51 @@ static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
> return 0;
> }
>
> +unsigned int tvp5150_get_hmax(struct v4l2_subdev *sd)
> +{
> + struct tvp5150 *decoder = to_tvp5150(sd);
> + v4l2_std_id std;
> +
> + /* Calculate height based on current standard */
> + if (decoder->norm == V4L2_STD_ALL)
> + std = tvp5150_read_std(sd);
> + else
> + std = decoder->norm;
> +
> + return (std & V4L2_STD_525_60) ?
> + TVP5150_V_MAX_525_60 : TVP5150_V_MAX_OTHERS;
> +}
> +
> +static inline void
> +__tvp5150_set_selection(struct v4l2_subdev *sd, struct v4l2_rect *rect)
You can drop 'inline', there is no need for that.
I'd also rename the function to something more understandable. E.g.
tvp5150_set_hw_selection().
> +{
> + struct tvp5150 *decoder = to_tvp5150(sd);
> + unsigned int hmax = tvp5150_get_hmax(sd);
> +
> + regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect->top);
> + regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
> + rect->top + rect->height - hmax);
> + regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
> + rect->left >> TVP5150_CROP_SHIFT);
> + regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
> + rect->left | (1 << TVP5150_CROP_SHIFT));
> + regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
> + (rect->left + rect->width - TVP5150_MAX_CROP_LEFT) >>
> + TVP5150_CROP_SHIFT);
> + regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
> + rect->left + rect->width - TVP5150_MAX_CROP_LEFT);
> +}
> +
> static int tvp5150_set_selection(struct v4l2_subdev *sd,
> struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_selection *sel)
> {
> struct tvp5150 *decoder = to_tvp5150(sd);
> struct v4l2_rect *rect = &sel->r;
> - v4l2_std_id std;
> - int hmax;
> + struct v4l2_rect *crop;
> + unsigned int hmax;
>
> - if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
> - sel->target != V4L2_SEL_TGT_CROP)
> + if (sel->target != V4L2_SEL_TGT_CROP)
> return -EINVAL;
>
> dev_dbg_lvl(sd->dev, 1, debug, "%s left=%d, top=%d, width=%d, height=%d\n",
> @@ -1038,17 +1092,7 @@ static int tvp5150_set_selection(struct v4l2_subdev *sd,
> /* tvp5150 has some special limits */
> rect->left = clamp(rect->left, 0, TVP5150_MAX_CROP_LEFT);
> rect->top = clamp(rect->top, 0, TVP5150_MAX_CROP_TOP);
> -
> - /* Calculate height based on current standard */
> - if (decoder->norm == V4L2_STD_ALL)
> - std = tvp5150_read_std(sd);
> - else
> - std = decoder->norm;
> -
> - if (std & V4L2_STD_525_60)
> - hmax = TVP5150_V_MAX_525_60;
> - else
> - hmax = TVP5150_V_MAX_OTHERS;
> + hmax = tvp5150_get_hmax(sd);
>
> /*
> * alignments:
> @@ -1061,20 +1105,23 @@ static int tvp5150_set_selection(struct v4l2_subdev *sd,
> hmax - TVP5150_MAX_CROP_TOP - rect->top,
> hmax - rect->top, 0, 0);
>
> - regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect->top);
> - regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
> - rect->top + rect->height - hmax);
> - regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
> - rect->left >> TVP5150_CROP_SHIFT);
> - regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
> - rect->left | (1 << TVP5150_CROP_SHIFT));
> - regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
> - (rect->left + rect->width - TVP5150_MAX_CROP_LEFT) >>
> - TVP5150_CROP_SHIFT);
> - regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
> - rect->left + rect->width - TVP5150_MAX_CROP_LEFT);
> + if (!IS_ENABLED(CONFIG_VIDEO_V4L2_SUBDEV_API) &&
> + sel->which == V4L2_SUBDEV_FORMAT_TRY)
> + return 0;
> +
> + crop = __tvp5150_get_pad_crop(decoder, cfg, sel->pad, sel->which);
> + if (IS_ERR(crop))
> + return PTR_ERR(crop);
> +
> + /*
> + * Update output image size if the selection (crop) rectangle size or
> + * position has been modified.
> + */
> + if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE &&
> + !v4l2_rect_equal(rect, crop))
> + __tvp5150_set_selection(sd, rect);
>
> - decoder->rect = *rect;
> + *crop = *rect;
>
> return 0;
> }
> @@ -1084,11 +1131,9 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd,
> struct v4l2_subdev_selection *sel)
> {
> struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
> + struct v4l2_rect *crop;
> v4l2_std_id std;
>
> - if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
> - return -EINVAL;
> -
> switch (sel->target) {
> case V4L2_SEL_TGT_CROP_BOUNDS:
> sel->r.left = 0;
> @@ -1106,7 +1151,11 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd,
> sel->r.height = TVP5150_V_MAX_OTHERS;
> return 0;
> case V4L2_SEL_TGT_CROP:
> - sel->r = decoder->rect;
> + crop = __tvp5150_get_pad_crop(decoder, cfg, sel->pad,
> + sel->which);
> + if (IS_ERR(crop))
> + return PTR_ERR(crop);
> + sel->r = *crop;
> return 0;
> default:
> return -EINVAL;
>
Regards,
Hans
next prev parent reply other threads:[~2019-09-27 9:01 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-30 10:16 [PATCH v10 00/14] TVP5150 features and fixes Marco Felsch
2019-08-30 10:16 ` [PATCH v10 01/14] dt-bindings: connector: analog: add sdtv standards property Marco Felsch
2019-09-27 9:09 ` Hans Verkuil
2019-09-27 10:01 ` Marco Felsch
2019-08-30 10:16 ` [PATCH v10 02/14] media: v4l2-fwnode: add v4l2_fwnode_connector Marco Felsch
2019-08-30 10:16 ` [PATCH v10 03/14] media: v4l2-fwnode: add initial connector parsing support Marco Felsch
2019-10-02 7:03 ` Sakari Ailus
2019-10-02 8:07 ` Marco Felsch
2019-10-22 10:17 ` Marco Felsch
2019-10-23 10:57 ` Sakari Ailus
2019-10-23 12:21 ` Marco Felsch
2019-10-24 12:02 ` Sakari Ailus
2019-11-08 8:58 ` Marco Felsch
2019-11-15 23:06 ` Sakari Ailus
2019-11-19 11:15 ` Marco Felsch
2019-11-27 8:26 ` Marco Felsch
2019-11-27 12:24 ` Sakari Ailus
2019-12-10 9:50 ` Marco Felsch
2020-01-07 11:56 ` Marco Felsch
2020-01-07 13:49 ` Sakari Ailus
2020-01-07 14:00 ` Marco Felsch
2020-01-07 14:03 ` Sakari Ailus
2019-11-27 12:21 ` Sakari Ailus
2019-08-30 10:16 ` [PATCH v10 04/14] partial revert of "[media] tvp5150: add HW input connectors support" Marco Felsch
2019-08-30 10:16 ` [PATCH v10 05/14] media: tvp5150: add input source selection of_graph support Marco Felsch
2019-09-27 8:54 ` Hans Verkuil
2019-09-27 12:09 ` Marco Felsch
2019-08-30 10:16 ` [PATCH v10 06/14] media: dt-bindings: tvp5150: Add input port connectors DT bindings Marco Felsch
2019-08-30 10:16 ` [PATCH v10 07/14] media: tvp5150: fix set_selection rectangle handling Marco Felsch
2019-09-27 12:13 ` Marco Felsch
2019-09-27 12:14 ` Hans Verkuil
2019-08-30 10:16 ` [PATCH v10 08/14] media: tvp5150: add FORMAT_TRY support for get/set selection handlers Marco Felsch
2019-09-27 9:01 ` Hans Verkuil [this message]
2019-09-27 10:57 ` Marco Felsch
2019-09-27 11:05 ` Hans Verkuil
2019-08-30 10:16 ` [PATCH v10 09/14] media: tvp5150: initialize subdev before parsing device tree Marco Felsch
2019-08-30 10:16 ` [PATCH v10 10/14] media: tvp5150: add s_power callback Marco Felsch
2019-08-30 10:16 ` [PATCH v10 11/14] media: dt-bindings: tvp5150: cleanup bindings stlye Marco Felsch
2019-08-30 10:16 ` [PATCH v10 12/14] media: dt-bindings: tvp5150: add optional sdtv standards documentation Marco Felsch
2019-08-30 10:16 ` [PATCH v10 13/14] media: tvp5150: add support to limit sdtv standards Marco Felsch
2019-09-27 8:52 ` Hans Verkuil
2019-09-27 12:09 ` Marco Felsch
2019-08-30 10:16 ` [PATCH v10 14/14] media: tvp5150: make debug output more readable Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=05b9b16f-dcd6-b76b-7e37-c246f4465515@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=devicetree@vger.kernel.org \
--cc=hans.verkuil@cisco.com \
--cc=jacopo+renesas@jmondi.org \
--cc=kernel@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=m.felsch@pengutronix.de \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).