[PATCH v3 00/13] Fixes from Chrome OS tree for MFC driver

[PATCH v3 00/13] Fixes from Chrome OS tree for MFC driver

[Arun Kumar K]

Upstreaming the fixes which have gone in to Chrome OS tree for MFC driver.
Tested on MFCV8, MFCV7 and MFCV6 based Exynos5 based boards, peach-pi
(5800), peach-pit (5420) and snow (5250).

Changes from v2:
1) Rebased on latest media-tree
2) Dropped the patch (14/14) from previous set
   s5p-mfc: Don't change the image size to smaller than the request.

Changes from v1:
1) Addressed all review comments from Kamil.
2) Dropped patches
   [media] s5p-mfc: set B-frames as 2 while encoding
   [media] s5p-mfc: remove reduntant clock on & clock off
   [media] s5p-mfc: don't disable clock when next ctx is pending
3) Rebased on media-tree

Arun Mankuzhi (2):
  [media] s5p-mfc: modify mfc wakeup sequence for V8
  [media] s5p-mfc: De-init MFC when watchdog kicks in

Ilja Friedel (1):
  [media] s5p-mfc: Only set timestamp/timecode for new frames.

Kiran AVND (4):
  [media] s5p-mfc: support MIN_BUFFERS query for encoder
  [media] s5p-mfc: keep RISC ON during reset for V7/V8
  [media] s5p-mfc: check mfc bus ctrl before reset
  [media] s5p-mfc: flush dpbs when resolution changes

Pawel Osciak (5):
  [media] s5p-mfc: Fix REQBUFS(0) for encoder.
  [media] s5p-mfc: Don't crash the kernel if the watchdog kicks in.
  [media] s5p-mfc: Remove unused alloc field from private buffer
    struct.
  [media] s5p-mfc: fix V4L2_CID_MIN_BUFFERS_FOR_CAPTURE on resolution
    change.
  [media] s5p-mfc: fix a race in interrupt flags handling

Prathyush K (1):
  [media] s5p-mfc: clear 'enter_suspend' flag if suspend fails

 drivers/media/platform/s5p-mfc/regs-mfc-v6.h    |    1 +
 drivers/media/platform/s5p-mfc/s5p_mfc.c        |   45 +++++----
 drivers/media/platform/s5p-mfc/s5p_mfc_common.h |    4 +-
 drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c   |  122 ++++++++++++++++++-----
 drivers/media/platform/s5p-mfc/s5p_mfc_dec.c    |    6 +-
 drivers/media/platform/s5p-mfc/s5p_mfc_enc.c    |   54 ++++++++++
 drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c |   13 +--
 drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c |   32 +-----
 8 files changed, 188 insertions(+), 89 deletions(-)

-- 
1.7.9.5

[PATCH v3 01/13] [media] s5p-mfc: support MIN_BUFFERS query for encoder

[Arun Kumar K]

From: Kiran AVND <avnd.kiran@samsung.com>

Add V4L2_CID_MIN_BUFFERS_FOR_OUTPUT query for encoder.
Once mfc encoder state is HEAD_PARSED, which is sequence
header produced, dpb_count is avaialable. Let user space
query this value.

Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_enc.c |   42 ++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
index a904a1c..4816f31 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
@@ -690,6 +690,16 @@ static struct mfc_control controls[] = {
 		.step = 1,
 		.default_value = 0,
 	},
+	{
+		.id = V4L2_CID_MIN_BUFFERS_FOR_OUTPUT,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Minimum number of output bufs",
+		.minimum = 1,
+		.maximum = 32,
+		.step = 1,
+		.default_value = 1,
+		.is_volatile = 1,
+	},
 };
 
 #define NUM_CTRLS ARRAY_SIZE(controls)
@@ -1624,8 +1634,40 @@ static int s5p_mfc_enc_s_ctrl(struct v4l2_ctrl *ctrl)
 	return ret;
 }
 
+static int s5p_mfc_enc_g_v_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct s5p_mfc_ctx *ctx = ctrl_to_ctx(ctrl);
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	switch (ctrl->id) {
+	case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT:
+		if (ctx->state >= MFCINST_HEAD_PARSED &&
+		    ctx->state < MFCINST_ABORT) {
+			ctrl->val = ctx->pb_count;
+			break;
+		} else if (ctx->state != MFCINST_INIT) {
+			v4l2_err(&dev->v4l2_dev, "Encoding not initialised\n");
+			return -EINVAL;
+		}
+		/* Should wait for the header to be produced */
+		s5p_mfc_clean_ctx_int_flags(ctx);
+		s5p_mfc_wait_for_done_ctx(ctx,
+				S5P_MFC_R2H_CMD_SEQ_DONE_RET, 0);
+		if (ctx->state >= MFCINST_HEAD_PARSED &&
+		    ctx->state < MFCINST_ABORT) {
+			ctrl->val = ctx->pb_count;
+		} else {
+			v4l2_err(&dev->v4l2_dev, "Encoding not initialised\n");
+			return -EINVAL;
+		}
+		break;
+	}
+	return 0;
+}
+
 static const struct v4l2_ctrl_ops s5p_mfc_enc_ctrl_ops = {
 	.s_ctrl = s5p_mfc_enc_s_ctrl,
+	.g_volatile_ctrl = s5p_mfc_enc_g_v_ctrl,
 };
 
 static int vidioc_s_parm(struct file *file, void *priv,
-- 
1.7.9.5

[PATCH v3 02/13] [media] s5p-mfc: Fix REQBUFS(0) for encoder.

[Arun Kumar K]

From: Pawel Osciak <posciak@chromium.org>

Handle REQBUFS(0) for CAPTURE queue as well. Also use the proper queue to call
it on for OUTPUT.

Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_enc.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
index 4816f31..6a1c890 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
@@ -1147,6 +1147,11 @@ static int vidioc_reqbufs(struct file *file, void *priv,
 		(reqbufs->memory != V4L2_MEMORY_USERPTR))
 		return -EINVAL;
 	if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		if (reqbufs->count == 0) {
+			ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+			ctx->capture_state = QUEUE_FREE;
+			return ret;
+		}
 		if (ctx->capture_state != QUEUE_FREE) {
 			mfc_err("invalid capture state: %d\n",
 							ctx->capture_state);
@@ -1168,6 +1173,14 @@ static int vidioc_reqbufs(struct file *file, void *priv,
 			return -ENOMEM;
 		}
 	} else if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		if (reqbufs->count == 0) {
+			mfc_debug(2, "Freeing buffers\n");
+			ret = vb2_reqbufs(&ctx->vq_src, reqbufs);
+			s5p_mfc_hw_call(dev->mfc_ops, release_codec_buffers,
+					ctx);
+			ctx->output_state = QUEUE_FREE;
+			return ret;
+		}
 		if (ctx->output_state != QUEUE_FREE) {
 			mfc_err("invalid output state: %d\n",
 							ctx->output_state);
-- 
1.7.9.5

[PATCH v3 03/13] [media] s5p-mfc: clear 'enter_suspend' flag if suspend fails

[Arun Kumar K]

From: Prathyush K <prathyush.k@samsung.com>

The enter_suspend flag is set after we enter mfc suspend function but if
suspend fails after that due to any reason (like hardware timeout etc),
this flag must be cleared before returning an error. Otherwise, this
flag never gets cleared and the MFC suspend will always return an error
on subsequent tries. If clock off fails, disable hw_lock also.

Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 165bc86..79c9537 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1284,11 +1284,17 @@ static int s5p_mfc_suspend(struct device *dev)
 			m_dev->int_cond, msecs_to_jiffies(MFC_INT_TIMEOUT));
 		if (ret == 0) {
 			mfc_err("Waiting for hardware to finish timed out\n");
+			clear_bit(0, &m_dev->enter_suspend);
 			return -EIO;
 		}
 	}
 
-	return s5p_mfc_sleep(m_dev);
+	ret = s5p_mfc_sleep(m_dev);
+	if (ret) {
+		clear_bit(0, &m_dev->enter_suspend);
+		clear_bit(0, &m_dev->hw_lock);
+	}
+	return ret;
 }
 
 static int s5p_mfc_resume(struct device *dev)
-- 
1.7.9.5

[PATCH v3 04/13] [media] s5p-mfc: Only set timestamp/timecode for new frames.

[Arun Kumar K]

From: Ilja Friedel <ihf@chromium.org>

Timestamp i of a previously decoded buffer was overwritten for some
H.264 streams with timestamp i+1 of the next buffer. This happened when
encountering frame_type S5P_FIMV_DECODE_FRAME_SKIPPED, indicating no
new frame.

In most cases this wrong indexing might not have been noticed except
for a one frame delay in frame presentation. For H.264 streams though
that require reordering of frames for presentation, it caused a slightly
erratic presentation time lookup and consequently dropped frames in the
Pepper Flash plugin.

Signed-off-by: Ilja H. Friedel <ihf@google.com>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 79c9537..eb71055 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -220,11 +220,14 @@ static void s5p_mfc_handle_frame_copy_time(struct s5p_mfc_ctx *ctx)
 	size_t dec_y_addr;
 	unsigned int frame_type;
 
-	dec_y_addr = s5p_mfc_hw_call(dev->mfc_ops, get_dec_y_adr, dev);
+	/* Make sure we actually have a new frame before continuing. */
 	frame_type = s5p_mfc_hw_call(dev->mfc_ops, get_dec_frame_type, dev);
+	if (frame_type == S5P_FIMV_DECODE_FRAME_SKIPPED)
+		return;
+	dec_y_addr = s5p_mfc_hw_call(dev->mfc_ops, get_dec_y_adr, dev);
 
 	/* Copy timestamp / timecode from decoded src to dst and set
-	   appropriate flags */
+	   appropriate flags. */
 	src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
 	list_for_each_entry(dst_buf, &ctx->dst_queue, list) {
 		if (vb2_dma_contig_plane_dma_addr(dst_buf->b, 0) == dec_y_addr) {
@@ -250,6 +253,11 @@ static void s5p_mfc_handle_frame_copy_time(struct s5p_mfc_ctx *ctx)
 				dst_buf->b->v4l2_buf.flags |=
 						V4L2_BUF_FLAG_BFRAME;
 				break;
+			default:
+				/* Don't know how to handle
+				   S5P_FIMV_DECODE_FRAME_OTHER_FRAME. */
+				mfc_debug(2, "Unexpected frame type: %d\n",
+						frame_type);
 			}
 			break;
 		}
-- 
1.7.9.5

[PATCH v3 05/13] [media] s5p-mfc: keep RISC ON during reset for V7/V8

[Arun Kumar K]

From: Kiran AVND <avnd.kiran@samsung.com>

Reset sequence for MFC V7 and V8 do not need RISC_ON
to be set to 0, while for MFC V6 it is still needed.

Also, remove a couple of register settings during Reset
which are not needed from V6 onwards.

Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_common.h |    1 +
 drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c   |   25 ++++++++++++++---------
 2 files changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
index 3e41ca1..5b0c334 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
@@ -340,6 +340,7 @@ struct s5p_mfc_dev {
 	struct s5p_mfc_hw_cmds *mfc_cmds;
 	const struct s5p_mfc_regs *mfc_regs;
 	enum s5p_mfc_fw_ver fw_ver;
+	bool risc_on; /* indicates if RISC is on or off */
 };
 
 /**
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
index 0c885a8..f5bb6b2 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
@@ -139,12 +139,6 @@ int s5p_mfc_reset(struct s5p_mfc_dev *dev)
 	mfc_debug_enter();
 
 	if (IS_MFCV6_PLUS(dev)) {
-		/* Reset IP */
-		/*  except RISC, reset */
-		mfc_write(dev, 0xFEE, S5P_FIMV_MFC_RESET_V6);
-		/*  reset release */
-		mfc_write(dev, 0x0, S5P_FIMV_MFC_RESET_V6);
-
 		/* Zero Initialization of MFC registers */
 		mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD_V6);
 		mfc_write(dev, 0, S5P_FIMV_HOST2RISC_CMD_V6);
@@ -153,8 +147,13 @@ int s5p_mfc_reset(struct s5p_mfc_dev *dev)
 		for (i = 0; i < S5P_FIMV_REG_CLEAR_COUNT_V6; i++)
 			mfc_write(dev, 0, S5P_FIMV_REG_CLEAR_BEGIN_V6 + (i*4));
 
-		/* Reset */
-		mfc_write(dev, 0, S5P_FIMV_RISC_ON_V6);
+		/* Reset
+		 * set RISC_ON to 0 during power_on & wake_up.
+		 * V6 needs RISC_ON set to 0 during reset also.
+		 */
+		if ((!dev->risc_on) || (!IS_MFCV7(dev)))
+			mfc_write(dev, 0, S5P_FIMV_RISC_ON_V6);
+
 		mfc_write(dev, 0x1FFF, S5P_FIMV_MFC_RESET_V6);
 		mfc_write(dev, 0, S5P_FIMV_MFC_RESET_V6);
 	} else {
@@ -226,6 +225,7 @@ int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
 	/* 0. MFC reset */
 	mfc_debug(2, "MFC reset..\n");
 	s5p_mfc_clock_on();
+	dev->risc_on = 0;
 	ret = s5p_mfc_reset(dev);
 	if (ret) {
 		mfc_err("Failed to reset MFC - timeout\n");
@@ -238,8 +238,10 @@ int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
 	s5p_mfc_clear_cmds(dev);
 	/* 3. Release reset signal to the RISC */
 	s5p_mfc_clean_dev_int_flags(dev);
-	if (IS_MFCV6_PLUS(dev))
+	if (IS_MFCV6_PLUS(dev)) {
+		dev->risc_on = 1;
 		mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
+	}
 	else
 		mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
 	mfc_debug(2, "Will now wait for completion of firmware transfer\n");
@@ -336,6 +338,7 @@ int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
 	/* 0. MFC reset */
 	mfc_debug(2, "MFC reset..\n");
 	s5p_mfc_clock_on();
+	dev->risc_on = 0;
 	ret = s5p_mfc_reset(dev);
 	if (ret) {
 		mfc_err("Failed to reset MFC - timeout\n");
@@ -354,8 +357,10 @@ int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
 		return ret;
 	}
 	/* 4. Release reset signal to the RISC */
-	if (IS_MFCV6_PLUS(dev))
+	if (IS_MFCV6_PLUS(dev)) {
+		dev->risc_on = 1;
 		mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
+	}
 	else
 		mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
 	mfc_debug(2, "Ok, now will write a command to wakeup the system\n");
-- 
1.7.9.5

[PATCH v3 06/13] [media] s5p-mfc: check mfc bus ctrl before reset

[Arun Kumar K]

From: Kiran AVND <avnd.kiran@samsung.com>

during reset sequence, it is advisable to follow the below
sequence, in order to avoid unexpected behavior from MFC
. set SFR 0x7110 MFC_BUS_RESET_CTRL 0x1
  // wait for REQ_STATUS to be 1
. get SFR 0x7110 MFC_BUS_RESET_CTRL 0x3
  // reset now

Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 drivers/media/platform/s5p-mfc/regs-mfc-v6.h  |    1 +
 drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c |   25 ++++++++++++++++++++++++-
 2 files changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/s5p-mfc/regs-mfc-v6.h b/drivers/media/platform/s5p-mfc/regs-mfc-v6.h
index 51cb2dd..83e01f3 100644
--- a/drivers/media/platform/s5p-mfc/regs-mfc-v6.h
+++ b/drivers/media/platform/s5p-mfc/regs-mfc-v6.h
@@ -71,6 +71,7 @@
 #define S5P_FIMV_R2H_CMD_ENC_BUFFER_FUL_RET_V6	16
 #define S5P_FIMV_R2H_CMD_ERR_RET_V6		32
 
+#define S5P_FIMV_MFC_BUS_RESET_CTRL            0x7110
 #define S5P_FIMV_FW_VERSION_V6			0xf000
 
 #define S5P_FIMV_INSTANCE_ID_V6			0xf008
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
index f5bb6b2..0d3661b 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
@@ -129,6 +129,25 @@ int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev)
 	return 0;
 }
 
+int s5p_mfc_bus_reset(struct s5p_mfc_dev *dev)
+{
+	unsigned int status;
+	unsigned long timeout;
+
+	/* Reset */
+	mfc_write(dev, 0x1, S5P_FIMV_MFC_BUS_RESET_CTRL);
+	timeout = jiffies + msecs_to_jiffies(MFC_BW_TIMEOUT);
+	/* Check bus status */
+	do {
+		if (time_after(jiffies, timeout)) {
+			mfc_err("Timeout while resetting MFC.\n");
+			return -EIO;
+		}
+		status = mfc_read(dev, S5P_FIMV_MFC_BUS_RESET_CTRL);
+	} while ((status & 0x2) == 0);
+	return 0;
+}
+
 /* Reset the device */
 int s5p_mfc_reset(struct s5p_mfc_dev *dev)
 {
@@ -147,11 +166,15 @@ int s5p_mfc_reset(struct s5p_mfc_dev *dev)
 		for (i = 0; i < S5P_FIMV_REG_CLEAR_COUNT_V6; i++)
 			mfc_write(dev, 0, S5P_FIMV_REG_CLEAR_BEGIN_V6 + (i*4));
 
+		/* check bus reset control before reset */
+		if (dev->risc_on)
+			if (s5p_mfc_bus_reset(dev))
+				return -EIO;
 		/* Reset
 		 * set RISC_ON to 0 during power_on & wake_up.
 		 * V6 needs RISC_ON set to 0 during reset also.
 		 */
-		if ((!dev->risc_on) || (!IS_MFCV7(dev)))
+		if ((!dev->risc_on) || (!IS_MFCV7_PLUS(dev)))
 			mfc_write(dev, 0, S5P_FIMV_RISC_ON_V6);
 
 		mfc_write(dev, 0x1FFF, S5P_FIMV_MFC_RESET_V6);
-- 
1.7.9.5

[PATCH v3 07/13] [media] s5p-mfc: Don't crash the kernel if the watchdog kicks in.

[Arun Kumar K]

From: Pawel Osciak <posciak@chromium.org>

If the software watchdog kicks in, the watchdog worker is not synchronized
with hardware interrupts and does not block other instances. It's possible
for it to clear the hw_lock, making other instances trigger a BUG() on
hw_lock checks. Since it's not fatal to clear the hw_lock to zero twice,
just WARN in those cases for now. We should not explode, as firmware will
return errors as needed for other instances after it's reloaded, or they
will time out.

A clean fix should involve killing other instances when watchdog kicks in,
but requires a major redesign of locking in the driver.

Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc.c |   21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index eb71055..8620236 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -342,8 +342,7 @@ static void s5p_mfc_handle_frame(struct s5p_mfc_ctx *ctx,
 		ctx->state = MFCINST_RES_CHANGE_INIT;
 		s5p_mfc_hw_call_void(dev->mfc_ops, clear_int_flags, dev);
 		wake_up_ctx(ctx, reason, err);
-		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
-			BUG();
+		WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
 		s5p_mfc_clock_off();
 		s5p_mfc_hw_call_void(dev->mfc_ops, try_run, dev);
 		return;
@@ -415,8 +414,7 @@ leave_handle_frame:
 		clear_work_bit(ctx);
 	s5p_mfc_hw_call_void(dev->mfc_ops, clear_int_flags, dev);
 	wake_up_ctx(ctx, reason, err);
-	if (test_and_clear_bit(0, &dev->hw_lock) == 0)
-		BUG();
+	WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
 	s5p_mfc_clock_off();
 	/* if suspending, wake up device and do not try_run again*/
 	if (test_bit(0, &dev->enter_suspend))
@@ -463,8 +461,7 @@ static void s5p_mfc_handle_error(struct s5p_mfc_dev *dev,
 			break;
 		}
 	}
-	if (test_and_clear_bit(0, &dev->hw_lock) == 0)
-		BUG();
+	WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
 	s5p_mfc_hw_call_void(dev->mfc_ops, clear_int_flags, dev);
 	s5p_mfc_clock_off();
 	wake_up_dev(dev, reason, err);
@@ -518,8 +515,7 @@ static void s5p_mfc_handle_seq_done(struct s5p_mfc_ctx *ctx,
 	}
 	s5p_mfc_hw_call_void(dev->mfc_ops, clear_int_flags, dev);
 	clear_work_bit(ctx);
-	if (test_and_clear_bit(0, &dev->hw_lock) == 0)
-		BUG();
+	WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
 	s5p_mfc_clock_off();
 	s5p_mfc_hw_call_void(dev->mfc_ops, try_run, dev);
 	wake_up_ctx(ctx, reason, err);
@@ -557,16 +553,14 @@ static void s5p_mfc_handle_init_buffers(struct s5p_mfc_ctx *ctx,
 		} else {
 			ctx->dpb_flush_flag = 0;
 		}
-		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
-			BUG();
+		WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
 
 		s5p_mfc_clock_off();
 
 		wake_up(&ctx->queue);
 		s5p_mfc_hw_call_void(dev->mfc_ops, try_run, dev);
 	} else {
-		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
-			BUG();
+		WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
 
 		s5p_mfc_clock_off();
 
@@ -643,8 +637,7 @@ static irqreturn_t s5p_mfc_irq(int irq, void *priv)
 				mfc_err("post_frame_start() failed\n");
 			s5p_mfc_hw_call_void(dev->mfc_ops, clear_int_flags, dev);
 			wake_up_ctx(ctx, reason, err);
-			if (test_and_clear_bit(0, &dev->hw_lock) == 0)
-				BUG();
+			WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0);
 			s5p_mfc_clock_off();
 			s5p_mfc_hw_call_void(dev->mfc_ops, try_run, dev);
 		} else {
-- 
1.7.9.5

[PATCH v3 08/13] [media] s5p-mfc: modify mfc wakeup sequence for V8

[Arun Kumar K]

From: Arun Mankuzhi <arun.m@samsung.com>

>From MFC V8, the MFC wakeup sequence has changed.
MFC wakeup command has to be sent after the host receives
firmware load complete status from risc.

Signed-off-by: Arun Mankuzhi <arun.m@samsung.com>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c |   78 +++++++++++++++++++------
 1 file changed, 61 insertions(+), 17 deletions(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
index 0d3661b..7c3eaa5 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
@@ -353,6 +353,58 @@ int s5p_mfc_sleep(struct s5p_mfc_dev *dev)
 	return ret;
 }
 
+static int s5p_mfc_v8_wait_wakeup(struct s5p_mfc_dev *dev)
+{
+	int ret;
+
+	/* Release reset signal to the RISC */
+	dev->risc_on = 1;
+	mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
+
+	if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_FW_STATUS_RET)) {
+		mfc_err("Failed to reset MFCV8\n");
+		return -EIO;
+	}
+	mfc_debug(2, "Write command to wakeup MFCV8\n");
+	ret = s5p_mfc_hw_call(dev->mfc_cmds, wakeup_cmd, dev);
+	if (ret) {
+		mfc_err("Failed to send command to MFCV8 - timeout\n");
+		return ret;
+	}
+
+	if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_WAKEUP_RET)) {
+		mfc_err("Failed to wakeup MFC\n");
+		return -EIO;
+	}
+	return ret;
+}
+
+static int s5p_mfc_wait_wakeup(struct s5p_mfc_dev *dev)
+{
+	int ret;
+
+	/* Send MFC wakeup command */
+	ret = s5p_mfc_hw_call(dev->mfc_cmds, wakeup_cmd, dev);
+	if (ret) {
+		mfc_err("Failed to send command to MFC - timeout\n");
+		return ret;
+	}
+
+	/* Release reset signal to the RISC */
+	if (IS_MFCV6_PLUS(dev)) {
+		dev->risc_on = 1;
+		mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
+	} else {
+		mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
+	}
+
+	if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_WAKEUP_RET)) {
+		mfc_err("Failed to wakeup MFC\n");
+		return -EIO;
+	}
+	return ret;
+}
+
 int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
 {
 	int ret;
@@ -365,6 +417,7 @@ int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
 	ret = s5p_mfc_reset(dev);
 	if (ret) {
 		mfc_err("Failed to reset MFC - timeout\n");
+		s5p_mfc_clock_off();
 		return ret;
 	}
 	mfc_debug(2, "Done MFC reset..\n");
@@ -373,25 +426,16 @@ int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
 	/* 2. Initialize registers of channel I/F */
 	s5p_mfc_clear_cmds(dev);
 	s5p_mfc_clean_dev_int_flags(dev);
-	/* 3. Initialize firmware */
-	ret = s5p_mfc_hw_call(dev->mfc_cmds, wakeup_cmd, dev);
-	if (ret) {
-		mfc_err("Failed to send command to MFC - timeout\n");
-		return ret;
-	}
-	/* 4. Release reset signal to the RISC */
-	if (IS_MFCV6_PLUS(dev)) {
-		dev->risc_on = 1;
-		mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
-	}
+	/* 3. Send MFC wakeup command and wait for completion*/
+	if (IS_MFCV8(dev))
+		ret = s5p_mfc_v8_wait_wakeup(dev);
 	else
-		mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
-	mfc_debug(2, "Ok, now will write a command to wakeup the system\n");
-	if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_WAKEUP_RET)) {
-		mfc_err("Failed to load firmware\n");
-		return -EIO;
-	}
+		ret = s5p_mfc_wait_wakeup(dev);
+
 	s5p_mfc_clock_off();
+	if (ret)
+		return ret;
+
 	dev->int_cond = 0;
 	if (dev->int_err != 0 || dev->int_type !=
 						S5P_MFC_R2H_CMD_WAKEUP_RET) {
-- 
1.7.9.5

[PATCH v3 09/13] [media] s5p-mfc: De-init MFC when watchdog kicks in

[Arun Kumar K]

From: Arun Mankuzhi <arun.m@samsung.com>

If the software watchdog kicks in, we need to de-init MFC
before reloading firmware and re-intializing it again.

Signed-off-by: Arun Mankuzhi <arun.m@samsung.com>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 8620236..39f8f2a 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -159,6 +159,10 @@ static void s5p_mfc_watchdog_worker(struct work_struct *work)
 	}
 	clear_bit(0, &dev->hw_lock);
 	spin_unlock_irqrestore(&dev->irqlock, flags);
+
+	/* De-init MFC */
+	s5p_mfc_deinit_hw(dev);
+
 	/* Double check if there is at least one instance running.
 	 * If no instance is in memory than no firmware should be present */
 	if (dev->num_inst > 0) {
-- 
1.7.9.5

[PATCH v3 10/13] [media] s5p-mfc: flush dpbs when resolution changes

[Arun Kumar K]

From: Kiran AVND <avnd.kiran@samsung.com>

While resolution change is detected by MFC, we flush out
older dpbs, send the resolution change event to application,
and then accept further queuing of new src buffers.

Sometimes, we error out during dpb flush because of lack of src
buffers. Since we have not started decoding new resolution yet,
it is simpler to push zero-size buffer until we flush out all dpbs.

This is already been done while handling EOS command, and this patch
extends the same logic to resolution change as well.

Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c |   20 ++------------------
 1 file changed, 2 insertions(+), 18 deletions(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
index 8798b14..7b1cf73 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
@@ -1532,27 +1532,11 @@ static inline int s5p_mfc_get_new_ctx(struct s5p_mfc_dev *dev)
 static inline void s5p_mfc_run_dec_last_frames(struct s5p_mfc_ctx *ctx)
 {
 	struct s5p_mfc_dev *dev = ctx->dev;
-	struct s5p_mfc_buf *temp_vb;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dev->irqlock, flags);
-
-	/* Frames are being decoded */
-	if (list_empty(&ctx->src_queue)) {
-		mfc_debug(2, "No src buffers.\n");
-		spin_unlock_irqrestore(&dev->irqlock, flags);
-		return;
-	}
-	/* Get the next source buffer */
-	temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
-	temp_vb->flags |= MFC_BUF_FLAG_USED;
-	s5p_mfc_set_dec_stream_buffer_v6(ctx,
-			vb2_dma_contig_plane_dma_addr(temp_vb->b, 0), 0, 0);
-	spin_unlock_irqrestore(&dev->irqlock, flags);
 
+	s5p_mfc_set_dec_stream_buffer_v6(ctx, 0, 0, 0);
 	dev->curr_ctx = ctx->num;
 	s5p_mfc_clean_ctx_int_flags(ctx);
-	s5p_mfc_decode_one_frame_v6(ctx, 1);
+	s5p_mfc_decode_one_frame_v6(ctx, MFC_DEC_LAST_FRAME);
 }
 
 static inline int s5p_mfc_run_dec_frame(struct s5p_mfc_ctx *ctx)
-- 
1.7.9.5

[PATCH v3 11/13] [media] s5p-mfc: Remove unused alloc field from private buffer struct.

[Arun Kumar K]

From: Pawel Osciak <posciak@chromium.org>

This field is no longer used as MFC driver doesn't use vb2 alloc contexts
anymore.

Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_common.h |    3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
index 5b0c334..15f7663 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
@@ -237,8 +237,6 @@ struct s5p_mfc_variant {
 
 /**
  * struct s5p_mfc_priv_buf - represents internal used buffer
- * @alloc:		allocation-specific context for each buffer
- *			(videobuf2 allocator)
  * @ofs:		offset of each buffer, will be used for MFC
  * @virt:		kernel virtual address, only valid when the
  *			buffer accessed by driver
@@ -246,7 +244,6 @@ struct s5p_mfc_variant {
  * @size:		size of the buffer
  */
 struct s5p_mfc_priv_buf {
-	void		*alloc;
 	unsigned long	ofs;
 	void		*virt;
 	dma_addr_t	dma;
-- 
1.7.9.5

[PATCH v3 12/13] [media] s5p-mfc: fix V4L2_CID_MIN_BUFFERS_FOR_CAPTURE on resolution change.

[Arun Kumar K]

From: Pawel Osciak <posciak@chromium.org>

G_CTRL on V4L2_CID_MIN_BUFFERS_FOR_CAPTURE will fail if userspace happens to
query it after getting a resolution change event and before the codec has
a chance to parse the header and switch to an initialized state.

Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_dec.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
index a98fe02..de90465 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
@@ -740,7 +740,8 @@ static int s5p_mfc_dec_g_v_ctrl(struct v4l2_ctrl *ctrl)
 		    ctx->state < MFCINST_ABORT) {
 			ctrl->val = ctx->pb_count;
 			break;
-		} else if (ctx->state != MFCINST_INIT) {
+		} else if (ctx->state != MFCINST_INIT &&
+				ctx->state != MFCINST_RES_CHANGE_END) {
 			v4l2_err(&dev->v4l2_dev, "Decoding not initialised\n");
 			return -EINVAL;
 		}
-- 
1.7.9.5

[PATCH v3 13/13] [media] s5p-mfc: fix a race in interrupt flags handling

[Arun Kumar K]

From: Pawel Osciak <posciak@chromium.org>

Interrupt result flags have to be cleared before a hardware job is run.
Otherwise, if they are cleared asynchronously, we may end up clearing them
after the interrupt for which we wanted to wait has already arrived, thus
overwriting the job results that we intended to wait for.

To prevent this, clear the flags only under hw_lock and before running
a hardware job.

Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c   |    2 --
 drivers/media/platform/s5p-mfc/s5p_mfc_dec.c    |    3 ---
 drivers/media/platform/s5p-mfc/s5p_mfc_enc.c    |    1 -
 drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c |   13 ++-----------
 drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c |   12 ++----------
 5 files changed, 4 insertions(+), 27 deletions(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
index 7c3eaa5..86d43d9 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
@@ -468,7 +468,6 @@ int s5p_mfc_open_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx)
 	}
 
 	set_work_bit_irqsave(ctx);
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	s5p_mfc_hw_call_void(dev->mfc_ops, try_run, dev);
 	if (s5p_mfc_wait_for_done_ctx(ctx,
 		S5P_MFC_R2H_CMD_OPEN_INSTANCE_RET, 0)) {
@@ -494,7 +493,6 @@ void s5p_mfc_close_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx)
 {
 	ctx->state = MFCINST_RETURN_INST;
 	set_work_bit_irqsave(ctx);
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	s5p_mfc_hw_call_void(dev->mfc_ops, try_run, dev);
 	/* Wait until instance is returned or timeout occurred */
 	if (s5p_mfc_wait_for_done_ctx(ctx,
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
index de90465..74bcec8 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
@@ -334,7 +334,6 @@ static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
 						MFCINST_RES_CHANGE_END)) {
 		/* If the MFC is parsing the header,
 		 * so wait until it is finished */
-		s5p_mfc_clean_ctx_int_flags(ctx);
 		s5p_mfc_wait_for_done_ctx(ctx, S5P_MFC_R2H_CMD_SEQ_DONE_RET,
 									0);
 	}
@@ -746,7 +745,6 @@ static int s5p_mfc_dec_g_v_ctrl(struct v4l2_ctrl *ctrl)
 			return -EINVAL;
 		}
 		/* Should wait for the header to be parsed */
-		s5p_mfc_clean_ctx_int_flags(ctx);
 		s5p_mfc_wait_for_done_ctx(ctx,
 				S5P_MFC_R2H_CMD_SEQ_DONE_RET, 0);
 		if (ctx->state >= MFCINST_HEAD_PARSED &&
@@ -1058,7 +1056,6 @@ static void s5p_mfc_stop_streaming(struct vb2_queue *q)
 		if (IS_MFCV6_PLUS(dev) && (ctx->state == MFCINST_RUNNING)) {
 			ctx->state = MFCINST_FLUSH;
 			set_work_bit_irqsave(ctx);
-			s5p_mfc_clean_ctx_int_flags(ctx);
 			s5p_mfc_hw_call_void(dev->mfc_ops, try_run, dev);
 			if (s5p_mfc_wait_for_done_ctx(ctx,
 				S5P_MFC_R2H_CMD_DPB_FLUSH_RET, 0))
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
index 6a1c890..7f919e4 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
@@ -1663,7 +1663,6 @@ static int s5p_mfc_enc_g_v_ctrl(struct v4l2_ctrl *ctrl)
 			return -EINVAL;
 		}
 		/* Should wait for the header to be produced */
-		s5p_mfc_clean_ctx_int_flags(ctx);
 		s5p_mfc_wait_for_done_ctx(ctx,
 				S5P_MFC_R2H_CMD_SEQ_DONE_RET, 0);
 		if (ctx->state >= MFCINST_HEAD_PARSED &&
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
index 7cf0796..0c4fcf2 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c
@@ -1178,7 +1178,6 @@ static void s5p_mfc_run_res_change(struct s5p_mfc_ctx *ctx)
 
 	s5p_mfc_set_dec_stream_buffer_v5(ctx, 0, 0, 0);
 	dev->curr_ctx = ctx->num;
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	s5p_mfc_decode_one_frame_v5(ctx, MFC_DEC_RES_CHANGE);
 }
 
@@ -1192,7 +1191,6 @@ static int s5p_mfc_run_dec_frame(struct s5p_mfc_ctx *ctx, int last_frame)
 		last_frame = MFC_DEC_LAST_FRAME;
 		s5p_mfc_set_dec_stream_buffer_v5(ctx, 0, 0, 0);
 		dev->curr_ctx = ctx->num;
-		s5p_mfc_clean_ctx_int_flags(ctx);
 		s5p_mfc_decode_one_frame_v5(ctx, last_frame);
 		return 0;
 	}
@@ -1212,7 +1210,6 @@ static int s5p_mfc_run_dec_frame(struct s5p_mfc_ctx *ctx, int last_frame)
 		ctx->consumed_stream, temp_vb->b->v4l2_planes[0].bytesused);
 	spin_unlock_irqrestore(&dev->irqlock, flags);
 	dev->curr_ctx = ctx->num;
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	if (temp_vb->b->v4l2_planes[0].bytesused == 0) {
 		last_frame = MFC_DEC_LAST_FRAME;
 		mfc_debug(2, "Setting ctx->state to FINISHING\n");
@@ -1273,7 +1270,6 @@ static int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx)
 	s5p_mfc_set_enc_stream_buffer_v5(ctx, dst_addr, dst_size);
 	spin_unlock_irqrestore(&dev->irqlock, flags);
 	dev->curr_ctx = ctx->num;
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	mfc_debug(2, "encoding buffer with index=%d state=%d\n",
 		  src_mb ? src_mb->b->v4l2_buf.index : -1, ctx->state);
 	s5p_mfc_encode_one_frame_v5(ctx);
@@ -1297,7 +1293,6 @@ static void s5p_mfc_run_init_dec(struct s5p_mfc_ctx *ctx)
 				0, temp_vb->b->v4l2_planes[0].bytesused);
 	spin_unlock_irqrestore(&dev->irqlock, flags);
 	dev->curr_ctx = ctx->num;
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	s5p_mfc_init_decode_v5(ctx);
 }
 
@@ -1317,7 +1312,6 @@ static void s5p_mfc_run_init_enc(struct s5p_mfc_ctx *ctx)
 	s5p_mfc_set_enc_stream_buffer_v5(ctx, dst_addr, dst_size);
 	spin_unlock_irqrestore(&dev->irqlock, flags);
 	dev->curr_ctx = ctx->num;
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	s5p_mfc_init_encode_v5(ctx);
 }
 
@@ -1352,7 +1346,6 @@ static int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx)
 				0, temp_vb->b->v4l2_planes[0].bytesused);
 	spin_unlock_irqrestore(&dev->irqlock, flags);
 	dev->curr_ctx = ctx->num;
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	ret = s5p_mfc_set_dec_frame_buffer_v5(ctx);
 	if (ret) {
 		mfc_err("Failed to alloc frame mem\n");
@@ -1396,6 +1389,8 @@ static void s5p_mfc_try_run_v5(struct s5p_mfc_dev *dev)
 	 * Now obtaining frames from MFC buffer
 	 */
 	s5p_mfc_clock_on();
+	s5p_mfc_clean_ctx_int_flags(ctx);
+
 	if (ctx->type == MFCINST_DECODER) {
 		s5p_mfc_set_dec_desc_buffer(ctx);
 		switch (ctx->state) {
@@ -1406,12 +1401,10 @@ static void s5p_mfc_try_run_v5(struct s5p_mfc_dev *dev)
 			ret = s5p_mfc_run_dec_frame(ctx, MFC_DEC_FRAME);
 			break;
 		case MFCINST_INIT:
-			s5p_mfc_clean_ctx_int_flags(ctx);
 			ret = s5p_mfc_hw_call(dev->mfc_cmds, open_inst_cmd,
 					ctx);
 			break;
 		case MFCINST_RETURN_INST:
-			s5p_mfc_clean_ctx_int_flags(ctx);
 			ret = s5p_mfc_hw_call(dev->mfc_cmds, close_inst_cmd,
 					ctx);
 			break;
@@ -1444,12 +1437,10 @@ static void s5p_mfc_try_run_v5(struct s5p_mfc_dev *dev)
 			ret = s5p_mfc_run_enc_frame(ctx);
 			break;
 		case MFCINST_INIT:
-			s5p_mfc_clean_ctx_int_flags(ctx);
 			ret = s5p_mfc_hw_call(dev->mfc_cmds, open_inst_cmd,
 					ctx);
 			break;
 		case MFCINST_RETURN_INST:
-			s5p_mfc_clean_ctx_int_flags(ctx);
 			ret = s5p_mfc_hw_call(dev->mfc_cmds, close_inst_cmd,
 					ctx);
 			break;
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
index 7b1cf73..9aea179 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
@@ -1394,7 +1394,6 @@ static inline void s5p_mfc_set_flush(struct s5p_mfc_ctx *ctx, int flush)
 
 	if (flush) {
 		dev->curr_ctx = ctx->num;
-		s5p_mfc_clean_ctx_int_flags(ctx);
 		writel(ctx->inst_no, mfc_regs->instance_id);
 		s5p_mfc_hw_call_void(dev->mfc_cmds, cmd_host2risc, dev,
 				S5P_FIMV_H2R_CMD_FLUSH_V6, NULL);
@@ -1535,7 +1534,6 @@ static inline void s5p_mfc_run_dec_last_frames(struct s5p_mfc_ctx *ctx)
 
 	s5p_mfc_set_dec_stream_buffer_v6(ctx, 0, 0, 0);
 	dev->curr_ctx = ctx->num;
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	s5p_mfc_decode_one_frame_v6(ctx, MFC_DEC_LAST_FRAME);
 }
 
@@ -1572,7 +1570,6 @@ static inline int s5p_mfc_run_dec_frame(struct s5p_mfc_ctx *ctx)
 	spin_unlock_irqrestore(&dev->irqlock, flags);
 
 	dev->curr_ctx = ctx->num;
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	if (temp_vb->b->v4l2_planes[0].bytesused == 0) {
 		last_frame = 1;
 		mfc_debug(2, "Setting ctx->state to FINISHING\n");
@@ -1629,7 +1626,6 @@ static inline int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx)
 	spin_unlock_irqrestore(&dev->irqlock, flags);
 
 	dev->curr_ctx = ctx->num;
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	s5p_mfc_encode_one_frame_v6(ctx);
 
 	return 0;
@@ -1651,7 +1647,6 @@ static inline void s5p_mfc_run_init_dec(struct s5p_mfc_ctx *ctx)
 			temp_vb->b->v4l2_planes[0].bytesused);
 	spin_unlock_irqrestore(&dev->irqlock, flags);
 	dev->curr_ctx = ctx->num;
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	s5p_mfc_init_decode_v6(ctx);
 }
 
@@ -1671,7 +1666,6 @@ static inline void s5p_mfc_run_init_enc(struct s5p_mfc_ctx *ctx)
 	s5p_mfc_set_enc_stream_buffer_v6(ctx, dst_addr, dst_size);
 	spin_unlock_irqrestore(&dev->irqlock, flags);
 	dev->curr_ctx = ctx->num;
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	s5p_mfc_init_encode_v6(ctx);
 }
 
@@ -1691,7 +1685,6 @@ static inline int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx)
 	}
 
 	dev->curr_ctx = ctx->num;
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	ret = s5p_mfc_set_dec_frame_buffer_v6(ctx);
 	if (ret) {
 		mfc_err("Failed to alloc frame mem.\n");
@@ -1706,7 +1699,6 @@ static inline int s5p_mfc_run_init_enc_buffers(struct s5p_mfc_ctx *ctx)
 	int ret;
 
 	dev->curr_ctx = ctx->num;
-	s5p_mfc_clean_ctx_int_flags(ctx);
 	ret = s5p_mfc_set_enc_ref_buffer_v6(ctx);
 	if (ret) {
 		mfc_err("Failed to alloc frame mem.\n");
@@ -1755,6 +1747,8 @@ static void s5p_mfc_try_run_v6(struct s5p_mfc_dev *dev)
 	 * Now obtaining frames from MFC buffer */
 
 	s5p_mfc_clock_on();
+	s5p_mfc_clean_ctx_int_flags(ctx);
+
 	if (ctx->type == MFCINST_DECODER) {
 		switch (ctx->state) {
 		case MFCINST_FINISHING:
@@ -1764,12 +1758,10 @@ static void s5p_mfc_try_run_v6(struct s5p_mfc_dev *dev)
 			ret = s5p_mfc_run_dec_frame(ctx);
 			break;
 		case MFCINST_INIT:
-			s5p_mfc_clean_ctx_int_flags(ctx);
 			ret = s5p_mfc_hw_call(dev->mfc_cmds, open_inst_cmd,
 					ctx);
 			break;
 		case MFCINST_RETURN_INST:
-			s5p_mfc_clean_ctx_int_flags(ctx);
 			ret = s5p_mfc_hw_call(dev->mfc_cmds, close_inst_cmd,
 					ctx);
 			break;
-- 
1.7.9.5