* [PATCH 0/4] Remove deprecated drivers
@ 2016-06-02 7:18 Hans Verkuil
2016-06-02 7:18 ` [PATCH 1/4] staging/media: remove deprecated mx2 driver Hans Verkuil
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Hans Verkuil @ 2016-06-02 7:18 UTC (permalink / raw)
To: linux-media
From: Hans Verkuil <hans.verkuil@cisco.com>
Remove deprecated drivers from staging/media.
Regards,
Hans
Hans Verkuil (4):
staging/media: remove deprecated mx2 driver
staging/media: remove deprecated mx3 driver
staging/media: remove deprecated omap1 driver
staging/media: remove deprecated timb driver
drivers/staging/media/Kconfig | 8 -
drivers/staging/media/Makefile | 4 -
drivers/staging/media/mx2/Kconfig | 15 -
drivers/staging/media/mx2/Makefile | 3 -
drivers/staging/media/mx2/TODO | 10 -
drivers/staging/media/mx2/mx2_camera.c | 1636 --------------------------
drivers/staging/media/mx3/Kconfig | 15 -
drivers/staging/media/mx3/Makefile | 3 -
drivers/staging/media/mx3/TODO | 10 -
drivers/staging/media/mx3/mx3_camera.c | 1264 ---------------------
drivers/staging/media/omap1/Kconfig | 13 -
drivers/staging/media/omap1/Makefile | 3 -
drivers/staging/media/omap1/TODO | 8 -
drivers/staging/media/omap1/omap1_camera.c | 1702 ----------------------------
drivers/staging/media/timb/Kconfig | 11 -
drivers/staging/media/timb/Makefile | 1 -
drivers/staging/media/timb/timblogiw.c | 870 --------------
17 files changed, 5576 deletions(-)
delete mode 100644 drivers/staging/media/mx2/Kconfig
delete mode 100644 drivers/staging/media/mx2/Makefile
delete mode 100644 drivers/staging/media/mx2/TODO
delete mode 100644 drivers/staging/media/mx2/mx2_camera.c
delete mode 100644 drivers/staging/media/mx3/Kconfig
delete mode 100644 drivers/staging/media/mx3/Makefile
delete mode 100644 drivers/staging/media/mx3/TODO
delete mode 100644 drivers/staging/media/mx3/mx3_camera.c
delete mode 100644 drivers/staging/media/omap1/Kconfig
delete mode 100644 drivers/staging/media/omap1/Makefile
delete mode 100644 drivers/staging/media/omap1/TODO
delete mode 100644 drivers/staging/media/omap1/omap1_camera.c
delete mode 100644 drivers/staging/media/timb/Kconfig
delete mode 100644 drivers/staging/media/timb/Makefile
delete mode 100644 drivers/staging/media/timb/timblogiw.c
--
2.8.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/4] staging/media: remove deprecated mx2 driver
2016-06-02 7:18 [PATCH 0/4] Remove deprecated drivers Hans Verkuil
@ 2016-06-02 7:18 ` Hans Verkuil
2016-06-02 7:18 ` [PATCH 2/4] staging/media: remove deprecated mx3 driver Hans Verkuil
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Hans Verkuil @ 2016-06-02 7:18 UTC (permalink / raw)
To: linux-media; +Cc: Hans Verkuil, Guennadi Liakhovetski
From: Hans Verkuil <hans.verkuil@cisco.com>
Remove this deprecated old driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/staging/media/Kconfig | 2 -
drivers/staging/media/Makefile | 1 -
drivers/staging/media/mx2/Kconfig | 15 -
drivers/staging/media/mx2/Makefile | 3 -
drivers/staging/media/mx2/TODO | 10 -
drivers/staging/media/mx2/mx2_camera.c | 1636 --------------------------------
6 files changed, 1667 deletions(-)
delete mode 100644 drivers/staging/media/mx2/Kconfig
delete mode 100644 drivers/staging/media/mx2/Makefile
delete mode 100644 drivers/staging/media/mx2/TODO
delete mode 100644 drivers/staging/media/mx2/mx2_camera.c
diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index de7e9f5..baf6fb3 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -27,8 +27,6 @@ source "drivers/staging/media/davinci_vpfe/Kconfig"
source "drivers/staging/media/mn88472/Kconfig"
-source "drivers/staging/media/mx2/Kconfig"
-
source "drivers/staging/media/mx3/Kconfig"
source "drivers/staging/media/omap1/Kconfig"
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
index 60a35b3..4ba7c6b 100644
--- a/drivers/staging/media/Makefile
+++ b/drivers/staging/media/Makefile
@@ -2,7 +2,6 @@ obj-$(CONFIG_I2C_BCM2048) += bcm2048/
obj-$(CONFIG_DVB_CXD2099) += cxd2099/
obj-$(CONFIG_LIRC_STAGING) += lirc/
obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/
-obj-$(CONFIG_VIDEO_MX2) += mx2/
obj-$(CONFIG_VIDEO_MX3) += mx3/
obj-$(CONFIG_VIDEO_OMAP1) += omap1/
obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/
diff --git a/drivers/staging/media/mx2/Kconfig b/drivers/staging/media/mx2/Kconfig
deleted file mode 100644
index beaa885..0000000
--- a/drivers/staging/media/mx2/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-config VIDEO_MX2
- tristate "i.MX27 Camera Sensor Interface driver"
- depends on VIDEO_DEV && SOC_CAMERA
- depends on SOC_IMX27 || COMPILE_TEST
- depends on HAS_DMA
- select VIDEOBUF2_DMA_CONTIG
- ---help---
- This is a v4l2 driver for the i.MX27 Camera Sensor Interface
-
- This driver is deprecated: it should become a stand-alone driver
- instead of using the soc-camera framework.
-
- Unless someone is willing to take this on (unlikely with such
- ancient hardware) it is going to be removed from the kernel
- soon.
diff --git a/drivers/staging/media/mx2/Makefile b/drivers/staging/media/mx2/Makefile
deleted file mode 100644
index fc5b282..0000000
--- a/drivers/staging/media/mx2/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# Makefile for i.MX27 Camera Sensor driver
-
-obj-$(CONFIG_VIDEO_MX2) += mx2_camera.o
diff --git a/drivers/staging/media/mx2/TODO b/drivers/staging/media/mx2/TODO
deleted file mode 100644
index bc68fa4..0000000
--- a/drivers/staging/media/mx2/TODO
+++ /dev/null
@@ -1,10 +0,0 @@
-This driver is deprecated: it should become a stand-alone driver instead of
-using the soc-camera framework.
-
-Unless someone is willing to take this on (unlikely with such ancient
-hardware) it is going to be removed from the kernel soon.
-
-Note that trivial patches will not be accepted anymore, only a full conversion.
-
-If you want to convert this driver, please contact the linux-media mailinglist
-(see http://linuxtv.org/lists.php).
diff --git a/drivers/staging/media/mx2/mx2_camera.c b/drivers/staging/media/mx2/mx2_camera.c
deleted file mode 100644
index 48dd5b7..0000000
--- a/drivers/staging/media/mx2/mx2_camera.c
+++ /dev/null
@@ -1,1636 +0,0 @@
-/*
- * V4L2 Driver for i.MX27 camera host
- *
- * Copyright (C) 2008, Sascha Hauer, Pengutronix
- * Copyright (C) 2010, Baruch Siach, Orex Computed Radiography
- * Copyright (C) 2012, Javier Martin, Vista Silicon S.L.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/gcd.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/math64.h>
-#include <linux/mm.h>
-#include <linux/moduleparam.h>
-#include <linux/time.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-#include <media/v4l2-common.h>
-#include <media/v4l2-dev.h>
-#include <media/videobuf2-v4l2.h>
-#include <media/videobuf2-dma-contig.h>
-#include <media/soc_camera.h>
-#include <media/drv-intf/soc_mediabus.h>
-
-#include <linux/videodev2.h>
-
-#include <linux/platform_data/media/camera-mx2.h>
-
-#include <asm/dma.h>
-
-#define MX2_CAM_DRV_NAME "mx2-camera"
-#define MX2_CAM_VERSION "0.0.6"
-#define MX2_CAM_DRIVER_DESCRIPTION "i.MX2x_Camera"
-
-/* reset values */
-#define CSICR1_RESET_VAL 0x40000800
-#define CSICR2_RESET_VAL 0x0
-#define CSICR3_RESET_VAL 0x0
-
-/* csi control reg 1 */
-#define CSICR1_SWAP16_EN (1 << 31)
-#define CSICR1_EXT_VSYNC (1 << 30)
-#define CSICR1_EOF_INTEN (1 << 29)
-#define CSICR1_PRP_IF_EN (1 << 28)
-#define CSICR1_CCIR_MODE (1 << 27)
-#define CSICR1_COF_INTEN (1 << 26)
-#define CSICR1_SF_OR_INTEN (1 << 25)
-#define CSICR1_RF_OR_INTEN (1 << 24)
-#define CSICR1_STATFF_LEVEL (3 << 22)
-#define CSICR1_STATFF_INTEN (1 << 21)
-#define CSICR1_RXFF_LEVEL(l) (((l) & 3) << 19)
-#define CSICR1_RXFF_INTEN (1 << 18)
-#define CSICR1_SOF_POL (1 << 17)
-#define CSICR1_SOF_INTEN (1 << 16)
-#define CSICR1_MCLKDIV(d) (((d) & 0xF) << 12)
-#define CSICR1_HSYNC_POL (1 << 11)
-#define CSICR1_CCIR_EN (1 << 10)
-#define CSICR1_MCLKEN (1 << 9)
-#define CSICR1_FCC (1 << 8)
-#define CSICR1_PACK_DIR (1 << 7)
-#define CSICR1_CLR_STATFIFO (1 << 6)
-#define CSICR1_CLR_RXFIFO (1 << 5)
-#define CSICR1_GCLK_MODE (1 << 4)
-#define CSICR1_INV_DATA (1 << 3)
-#define CSICR1_INV_PCLK (1 << 2)
-#define CSICR1_REDGE (1 << 1)
-#define CSICR1_FMT_MASK (CSICR1_PACK_DIR | CSICR1_SWAP16_EN)
-
-#define SHIFT_STATFF_LEVEL 22
-#define SHIFT_RXFF_LEVEL 19
-#define SHIFT_MCLKDIV 12
-
-#define SHIFT_FRMCNT 16
-
-#define CSICR1 0x00
-#define CSICR2 0x04
-#define CSISR 0x08
-#define CSISTATFIFO 0x0c
-#define CSIRFIFO 0x10
-#define CSIRXCNT 0x14
-#define CSICR3 0x1c
-#define CSIDMASA_STATFIFO 0x20
-#define CSIDMATA_STATFIFO 0x24
-#define CSIDMASA_FB1 0x28
-#define CSIDMASA_FB2 0x2c
-#define CSIFBUF_PARA 0x30
-#define CSIIMAG_PARA 0x34
-
-/* EMMA PrP */
-#define PRP_CNTL 0x00
-#define PRP_INTR_CNTL 0x04
-#define PRP_INTRSTATUS 0x08
-#define PRP_SOURCE_Y_PTR 0x0c
-#define PRP_SOURCE_CB_PTR 0x10
-#define PRP_SOURCE_CR_PTR 0x14
-#define PRP_DEST_RGB1_PTR 0x18
-#define PRP_DEST_RGB2_PTR 0x1c
-#define PRP_DEST_Y_PTR 0x20
-#define PRP_DEST_CB_PTR 0x24
-#define PRP_DEST_CR_PTR 0x28
-#define PRP_SRC_FRAME_SIZE 0x2c
-#define PRP_DEST_CH1_LINE_STRIDE 0x30
-#define PRP_SRC_PIXEL_FORMAT_CNTL 0x34
-#define PRP_CH1_PIXEL_FORMAT_CNTL 0x38
-#define PRP_CH1_OUT_IMAGE_SIZE 0x3c
-#define PRP_CH2_OUT_IMAGE_SIZE 0x40
-#define PRP_SRC_LINE_STRIDE 0x44
-#define PRP_CSC_COEF_012 0x48
-#define PRP_CSC_COEF_345 0x4c
-#define PRP_CSC_COEF_678 0x50
-#define PRP_CH1_RZ_HORI_COEF1 0x54
-#define PRP_CH1_RZ_HORI_COEF2 0x58
-#define PRP_CH1_RZ_HORI_VALID 0x5c
-#define PRP_CH1_RZ_VERT_COEF1 0x60
-#define PRP_CH1_RZ_VERT_COEF2 0x64
-#define PRP_CH1_RZ_VERT_VALID 0x68
-#define PRP_CH2_RZ_HORI_COEF1 0x6c
-#define PRP_CH2_RZ_HORI_COEF2 0x70
-#define PRP_CH2_RZ_HORI_VALID 0x74
-#define PRP_CH2_RZ_VERT_COEF1 0x78
-#define PRP_CH2_RZ_VERT_COEF2 0x7c
-#define PRP_CH2_RZ_VERT_VALID 0x80
-
-#define PRP_CNTL_CH1EN (1 << 0)
-#define PRP_CNTL_CH2EN (1 << 1)
-#define PRP_CNTL_CSIEN (1 << 2)
-#define PRP_CNTL_DATA_IN_YUV420 (0 << 3)
-#define PRP_CNTL_DATA_IN_YUV422 (1 << 3)
-#define PRP_CNTL_DATA_IN_RGB16 (2 << 3)
-#define PRP_CNTL_DATA_IN_RGB32 (3 << 3)
-#define PRP_CNTL_CH1_OUT_RGB8 (0 << 5)
-#define PRP_CNTL_CH1_OUT_RGB16 (1 << 5)
-#define PRP_CNTL_CH1_OUT_RGB32 (2 << 5)
-#define PRP_CNTL_CH1_OUT_YUV422 (3 << 5)
-#define PRP_CNTL_CH2_OUT_YUV420 (0 << 7)
-#define PRP_CNTL_CH2_OUT_YUV422 (1 << 7)
-#define PRP_CNTL_CH2_OUT_YUV444 (2 << 7)
-#define PRP_CNTL_CH1_LEN (1 << 9)
-#define PRP_CNTL_CH2_LEN (1 << 10)
-#define PRP_CNTL_SKIP_FRAME (1 << 11)
-#define PRP_CNTL_SWRST (1 << 12)
-#define PRP_CNTL_CLKEN (1 << 13)
-#define PRP_CNTL_WEN (1 << 14)
-#define PRP_CNTL_CH1BYP (1 << 15)
-#define PRP_CNTL_IN_TSKIP(x) ((x) << 16)
-#define PRP_CNTL_CH1_TSKIP(x) ((x) << 19)
-#define PRP_CNTL_CH2_TSKIP(x) ((x) << 22)
-#define PRP_CNTL_INPUT_FIFO_LEVEL(x) ((x) << 25)
-#define PRP_CNTL_RZ_FIFO_LEVEL(x) ((x) << 27)
-#define PRP_CNTL_CH2B1EN (1 << 29)
-#define PRP_CNTL_CH2B2EN (1 << 30)
-#define PRP_CNTL_CH2FEN (1 << 31)
-
-/* IRQ Enable and status register */
-#define PRP_INTR_RDERR (1 << 0)
-#define PRP_INTR_CH1WERR (1 << 1)
-#define PRP_INTR_CH2WERR (1 << 2)
-#define PRP_INTR_CH1FC (1 << 3)
-#define PRP_INTR_CH2FC (1 << 5)
-#define PRP_INTR_LBOVF (1 << 7)
-#define PRP_INTR_CH2OVF (1 << 8)
-
-/* Resizing registers */
-#define PRP_RZ_VALID_TBL_LEN(x) ((x) << 24)
-#define PRP_RZ_VALID_BILINEAR (1 << 31)
-
-#define MAX_VIDEO_MEM 16
-
-#define RESIZE_NUM_MIN 1
-#define RESIZE_NUM_MAX 20
-#define BC_COEF 3
-#define SZ_COEF (1 << BC_COEF)
-
-#define RESIZE_DIR_H 0
-#define RESIZE_DIR_V 1
-
-#define RESIZE_ALGO_BILINEAR 0
-#define RESIZE_ALGO_AVERAGING 1
-
-struct mx2_prp_cfg {
- int channel;
- u32 in_fmt;
- u32 out_fmt;
- u32 src_pixel;
- u32 ch1_pixel;
- u32 irq_flags;
- u32 csicr1;
-};
-
-/* prp resizing parameters */
-struct emma_prp_resize {
- int algo; /* type of algorithm used */
- int len; /* number of coefficients */
- unsigned char s[RESIZE_NUM_MAX]; /* table of coefficients */
-};
-
-/* prp configuration for a client-host fmt pair */
-struct mx2_fmt_cfg {
- u32 in_fmt;
- u32 out_fmt;
- struct mx2_prp_cfg cfg;
-};
-
-struct mx2_buf_internal {
- struct list_head queue;
- int bufnum;
- bool discard;
-};
-
-/* buffer for one video frame */
-struct mx2_buffer {
- /* common v4l buffer stuff -- must be first */
- struct vb2_v4l2_buffer vb;
- struct mx2_buf_internal internal;
-};
-
-enum mx2_camera_type {
- IMX27_CAMERA,
-};
-
-struct mx2_camera_dev {
- struct device *dev;
- struct soc_camera_host soc_host;
- struct clk *clk_emma_ahb, *clk_emma_ipg;
- struct clk *clk_csi_ahb, *clk_csi_per;
-
- void __iomem *base_csi, *base_emma;
-
- struct mx2_camera_platform_data *pdata;
- unsigned long platform_flags;
-
- struct list_head capture;
- struct list_head active_bufs;
- struct list_head discard;
-
- spinlock_t lock;
-
- int dma;
- struct mx2_buffer *active;
- struct mx2_buffer *fb1_active;
- struct mx2_buffer *fb2_active;
-
- u32 csicr1;
- enum mx2_camera_type devtype;
-
- struct mx2_buf_internal buf_discard[2];
- void *discard_buffer;
- dma_addr_t discard_buffer_dma;
- size_t discard_size;
- struct mx2_fmt_cfg *emma_prp;
- struct emma_prp_resize resizing[2];
- unsigned int s_width, s_height;
- u32 frame_count;
- struct vb2_alloc_ctx *alloc_ctx;
-};
-
-static struct platform_device_id mx2_camera_devtype[] = {
- {
- .name = "imx27-camera",
- .driver_data = IMX27_CAMERA,
- }, {
- /* sentinel */
- }
-};
-MODULE_DEVICE_TABLE(platform, mx2_camera_devtype);
-
-static struct mx2_buffer *mx2_ibuf_to_buf(struct mx2_buf_internal *int_buf)
-{
- return container_of(int_buf, struct mx2_buffer, internal);
-}
-
-static struct mx2_fmt_cfg mx27_emma_prp_table[] = {
- /*
- * This is a generic configuration which is valid for most
- * prp input-output format combinations.
- * We set the incoming and outgoing pixelformat to a
- * 16 Bit wide format and adjust the bytesperline
- * accordingly. With this configuration the inputdata
- * will not be changed by the emma and could be any type
- * of 16 Bit Pixelformat.
- */
- {
- .in_fmt = 0,
- .out_fmt = 0,
- .cfg = {
- .channel = 1,
- .in_fmt = PRP_CNTL_DATA_IN_RGB16,
- .out_fmt = PRP_CNTL_CH1_OUT_RGB16,
- .src_pixel = 0x2ca00565, /* RGB565 */
- .ch1_pixel = 0x2ca00565, /* RGB565 */
- .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH1WERR |
- PRP_INTR_CH1FC | PRP_INTR_LBOVF,
- .csicr1 = 0,
- }
- },
- {
- .in_fmt = MEDIA_BUS_FMT_UYVY8_2X8,
- .out_fmt = V4L2_PIX_FMT_YUYV,
- .cfg = {
- .channel = 1,
- .in_fmt = PRP_CNTL_DATA_IN_YUV422,
- .out_fmt = PRP_CNTL_CH1_OUT_YUV422,
- .src_pixel = 0x22000888, /* YUV422 (YUYV) */
- .ch1_pixel = 0x62000888, /* YUV422 (YUYV) */
- .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH1WERR |
- PRP_INTR_CH1FC | PRP_INTR_LBOVF,
- .csicr1 = CSICR1_SWAP16_EN,
- }
- },
- {
- .in_fmt = MEDIA_BUS_FMT_YUYV8_2X8,
- .out_fmt = V4L2_PIX_FMT_YUYV,
- .cfg = {
- .channel = 1,
- .in_fmt = PRP_CNTL_DATA_IN_YUV422,
- .out_fmt = PRP_CNTL_CH1_OUT_YUV422,
- .src_pixel = 0x22000888, /* YUV422 (YUYV) */
- .ch1_pixel = 0x62000888, /* YUV422 (YUYV) */
- .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH1WERR |
- PRP_INTR_CH1FC | PRP_INTR_LBOVF,
- .csicr1 = CSICR1_PACK_DIR,
- }
- },
- {
- .in_fmt = MEDIA_BUS_FMT_YUYV8_2X8,
- .out_fmt = V4L2_PIX_FMT_YUV420,
- .cfg = {
- .channel = 2,
- .in_fmt = PRP_CNTL_DATA_IN_YUV422,
- .out_fmt = PRP_CNTL_CH2_OUT_YUV420,
- .src_pixel = 0x22000888, /* YUV422 (YUYV) */
- .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
- PRP_INTR_CH2FC | PRP_INTR_LBOVF |
- PRP_INTR_CH2OVF,
- .csicr1 = CSICR1_PACK_DIR,
- }
- },
- {
- .in_fmt = MEDIA_BUS_FMT_UYVY8_2X8,
- .out_fmt = V4L2_PIX_FMT_YUV420,
- .cfg = {
- .channel = 2,
- .in_fmt = PRP_CNTL_DATA_IN_YUV422,
- .out_fmt = PRP_CNTL_CH2_OUT_YUV420,
- .src_pixel = 0x22000888, /* YUV422 (YUYV) */
- .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
- PRP_INTR_CH2FC | PRP_INTR_LBOVF |
- PRP_INTR_CH2OVF,
- .csicr1 = CSICR1_SWAP16_EN,
- }
- },
-};
-
-static struct mx2_fmt_cfg *mx27_emma_prp_get_format(u32 in_fmt, u32 out_fmt)
-{
- int i;
-
- for (i = 1; i < ARRAY_SIZE(mx27_emma_prp_table); i++)
- if ((mx27_emma_prp_table[i].in_fmt == in_fmt) &&
- (mx27_emma_prp_table[i].out_fmt == out_fmt)) {
- return &mx27_emma_prp_table[i];
- }
- /* If no match return the most generic configuration */
- return &mx27_emma_prp_table[0];
-};
-
-static void mx27_update_emma_buf(struct mx2_camera_dev *pcdev,
- unsigned long phys, int bufnum)
-{
- struct mx2_fmt_cfg *prp = pcdev->emma_prp;
-
- if (prp->cfg.channel == 1) {
- writel(phys, pcdev->base_emma +
- PRP_DEST_RGB1_PTR + 4 * bufnum);
- } else {
- writel(phys, pcdev->base_emma +
- PRP_DEST_Y_PTR - 0x14 * bufnum);
- if (prp->out_fmt == V4L2_PIX_FMT_YUV420) {
- u32 imgsize = pcdev->soc_host.icd->user_height *
- pcdev->soc_host.icd->user_width;
-
- writel(phys + imgsize, pcdev->base_emma +
- PRP_DEST_CB_PTR - 0x14 * bufnum);
- writel(phys + ((5 * imgsize) / 4), pcdev->base_emma +
- PRP_DEST_CR_PTR - 0x14 * bufnum);
- }
- }
-}
-
-static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev)
-{
- clk_disable_unprepare(pcdev->clk_csi_ahb);
- clk_disable_unprepare(pcdev->clk_csi_per);
- writel(0, pcdev->base_csi + CSICR1);
- writel(0, pcdev->base_emma + PRP_CNTL);
-}
-
-static int mx2_camera_add_device(struct soc_camera_device *icd)
-{
- dev_info(icd->parent, "Camera driver attached to camera %d\n",
- icd->devnum);
-
- return 0;
-}
-
-static void mx2_camera_remove_device(struct soc_camera_device *icd)
-{
- dev_info(icd->parent, "Camera driver detached from camera %d\n",
- icd->devnum);
-}
-
-/*
- * The following two functions absolutely depend on the fact, that
- * there can be only one camera on mx2 camera sensor interface
- */
-static int mx2_camera_clock_start(struct soc_camera_host *ici)
-{
- struct mx2_camera_dev *pcdev = ici->priv;
- int ret;
- u32 csicr1;
-
- ret = clk_prepare_enable(pcdev->clk_csi_ahb);
- if (ret < 0)
- return ret;
-
- ret = clk_prepare_enable(pcdev->clk_csi_per);
- if (ret < 0)
- goto exit_csi_ahb;
-
- csicr1 = CSICR1_MCLKEN | CSICR1_PRP_IF_EN | CSICR1_FCC |
- CSICR1_RXFF_LEVEL(0);
-
- pcdev->csicr1 = csicr1;
- writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
-
- pcdev->frame_count = 0;
-
- return 0;
-
-exit_csi_ahb:
- clk_disable_unprepare(pcdev->clk_csi_ahb);
-
- return ret;
-}
-
-static void mx2_camera_clock_stop(struct soc_camera_host *ici)
-{
- struct mx2_camera_dev *pcdev = ici->priv;
-
- mx2_camera_deactivate(pcdev);
-}
-
-/*
- * Videobuf operations
- */
-static int mx2_videobuf_setup(struct vb2_queue *vq,
- unsigned int *count, unsigned int *num_planes,
- unsigned int sizes[], void *alloc_ctxs[])
-{
- struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx2_camera_dev *pcdev = ici->priv;
-
- dev_dbg(icd->parent, "count=%d, size=%d\n", *count, sizes[0]);
-
- alloc_ctxs[0] = pcdev->alloc_ctx;
-
- sizes[0] = icd->sizeimage;
-
- if (0 == *count)
- *count = 32;
- if (!*num_planes &&
- sizes[0] * *count > MAX_VIDEO_MEM * 1024 * 1024)
- *count = (MAX_VIDEO_MEM * 1024 * 1024) / sizes[0];
-
- *num_planes = 1;
-
- return 0;
-}
-
-static int mx2_videobuf_prepare(struct vb2_buffer *vb)
-{
- struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
- int ret = 0;
-
- dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
- vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0));
-
-#ifdef DEBUG
- /*
- * This can be useful if you want to see if we actually fill
- * the buffer with something
- */
- memset((void *)vb2_plane_vaddr(vb, 0),
- 0xaa, vb2_get_plane_payload(vb, 0));
-#endif
-
- vb2_set_plane_payload(vb, 0, icd->sizeimage);
- if (vb2_plane_vaddr(vb, 0) &&
- vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) {
- ret = -EINVAL;
- goto out;
- }
-
- return 0;
-
-out:
- return ret;
-}
-
-static void mx2_videobuf_queue(struct vb2_buffer *vb)
-{
- struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
- struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
- struct soc_camera_host *ici =
- to_soc_camera_host(icd->parent);
- struct mx2_camera_dev *pcdev = ici->priv;
- struct mx2_buffer *buf = container_of(vbuf, struct mx2_buffer, vb);
- unsigned long flags;
-
- dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
- vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0));
-
- spin_lock_irqsave(&pcdev->lock, flags);
-
- list_add_tail(&buf->internal.queue, &pcdev->capture);
-
- spin_unlock_irqrestore(&pcdev->lock, flags);
-}
-
-static void mx27_camera_emma_buf_init(struct soc_camera_device *icd,
- int bytesperline)
-{
- struct soc_camera_host *ici =
- to_soc_camera_host(icd->parent);
- struct mx2_camera_dev *pcdev = ici->priv;
- struct mx2_fmt_cfg *prp = pcdev->emma_prp;
-
- writel((pcdev->s_width << 16) | pcdev->s_height,
- pcdev->base_emma + PRP_SRC_FRAME_SIZE);
- writel(prp->cfg.src_pixel,
- pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL);
- if (prp->cfg.channel == 1) {
- writel((icd->user_width << 16) | icd->user_height,
- pcdev->base_emma + PRP_CH1_OUT_IMAGE_SIZE);
- writel(bytesperline,
- pcdev->base_emma + PRP_DEST_CH1_LINE_STRIDE);
- writel(prp->cfg.ch1_pixel,
- pcdev->base_emma + PRP_CH1_PIXEL_FORMAT_CNTL);
- } else { /* channel 2 */
- writel((icd->user_width << 16) | icd->user_height,
- pcdev->base_emma + PRP_CH2_OUT_IMAGE_SIZE);
- }
-
- /* Enable interrupts */
- writel(prp->cfg.irq_flags, pcdev->base_emma + PRP_INTR_CNTL);
-}
-
-static void mx2_prp_resize_commit(struct mx2_camera_dev *pcdev)
-{
- int dir;
-
- for (dir = RESIZE_DIR_H; dir <= RESIZE_DIR_V; dir++) {
- unsigned char *s = pcdev->resizing[dir].s;
- int len = pcdev->resizing[dir].len;
- unsigned int coeff[2] = {0, 0};
- unsigned int valid = 0;
- int i;
-
- if (len == 0)
- continue;
-
- for (i = RESIZE_NUM_MAX - 1; i >= 0; i--) {
- int j;
-
- j = i > 9 ? 1 : 0;
- coeff[j] = (coeff[j] << BC_COEF) |
- (s[i] & (SZ_COEF - 1));
-
- if (i == 5 || i == 15)
- coeff[j] <<= 1;
-
- valid = (valid << 1) | (s[i] >> BC_COEF);
- }
-
- valid |= PRP_RZ_VALID_TBL_LEN(len);
-
- if (pcdev->resizing[dir].algo == RESIZE_ALGO_BILINEAR)
- valid |= PRP_RZ_VALID_BILINEAR;
-
- if (pcdev->emma_prp->cfg.channel == 1) {
- if (dir == RESIZE_DIR_H) {
- writel(coeff[0], pcdev->base_emma +
- PRP_CH1_RZ_HORI_COEF1);
- writel(coeff[1], pcdev->base_emma +
- PRP_CH1_RZ_HORI_COEF2);
- writel(valid, pcdev->base_emma +
- PRP_CH1_RZ_HORI_VALID);
- } else {
- writel(coeff[0], pcdev->base_emma +
- PRP_CH1_RZ_VERT_COEF1);
- writel(coeff[1], pcdev->base_emma +
- PRP_CH1_RZ_VERT_COEF2);
- writel(valid, pcdev->base_emma +
- PRP_CH1_RZ_VERT_VALID);
- }
- } else {
- if (dir == RESIZE_DIR_H) {
- writel(coeff[0], pcdev->base_emma +
- PRP_CH2_RZ_HORI_COEF1);
- writel(coeff[1], pcdev->base_emma +
- PRP_CH2_RZ_HORI_COEF2);
- writel(valid, pcdev->base_emma +
- PRP_CH2_RZ_HORI_VALID);
- } else {
- writel(coeff[0], pcdev->base_emma +
- PRP_CH2_RZ_VERT_COEF1);
- writel(coeff[1], pcdev->base_emma +
- PRP_CH2_RZ_VERT_COEF2);
- writel(valid, pcdev->base_emma +
- PRP_CH2_RZ_VERT_VALID);
- }
- }
- }
-}
-
-static int mx2_start_streaming(struct vb2_queue *q, unsigned int count)
-{
- struct soc_camera_device *icd = soc_camera_from_vb2q(q);
- struct soc_camera_host *ici =
- to_soc_camera_host(icd->parent);
- struct mx2_camera_dev *pcdev = ici->priv;
- struct mx2_fmt_cfg *prp = pcdev->emma_prp;
- struct vb2_buffer *vb;
- struct mx2_buffer *buf;
- unsigned long phys;
- int bytesperline;
- unsigned long flags;
-
- if (count < 2)
- return -ENOBUFS;
-
- spin_lock_irqsave(&pcdev->lock, flags);
-
- buf = list_first_entry(&pcdev->capture, struct mx2_buffer,
- internal.queue);
- buf->internal.bufnum = 0;
- vb = &buf->vb.vb2_buf;
-
- phys = vb2_dma_contig_plane_dma_addr(vb, 0);
- mx27_update_emma_buf(pcdev, phys, buf->internal.bufnum);
- list_move_tail(pcdev->capture.next, &pcdev->active_bufs);
-
- buf = list_first_entry(&pcdev->capture, struct mx2_buffer,
- internal.queue);
- buf->internal.bufnum = 1;
- vb = &buf->vb.vb2_buf;
-
- phys = vb2_dma_contig_plane_dma_addr(vb, 0);
- mx27_update_emma_buf(pcdev, phys, buf->internal.bufnum);
- list_move_tail(pcdev->capture.next, &pcdev->active_bufs);
-
- bytesperline = soc_mbus_bytes_per_line(icd->user_width,
- icd->current_fmt->host_fmt);
- if (bytesperline < 0) {
- spin_unlock_irqrestore(&pcdev->lock, flags);
- return bytesperline;
- }
-
- /*
- * I didn't manage to properly enable/disable the prp
- * on a per frame basis during running transfers,
- * thus we allocate a buffer here and use it to
- * discard frames when no buffer is available.
- * Feel free to work on this ;)
- */
- pcdev->discard_size = icd->user_height * bytesperline;
- pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev,
- pcdev->discard_size,
- &pcdev->discard_buffer_dma, GFP_ATOMIC);
- if (!pcdev->discard_buffer) {
- spin_unlock_irqrestore(&pcdev->lock, flags);
- return -ENOMEM;
- }
-
- pcdev->buf_discard[0].discard = true;
- list_add_tail(&pcdev->buf_discard[0].queue,
- &pcdev->discard);
-
- pcdev->buf_discard[1].discard = true;
- list_add_tail(&pcdev->buf_discard[1].queue,
- &pcdev->discard);
-
- mx2_prp_resize_commit(pcdev);
-
- mx27_camera_emma_buf_init(icd, bytesperline);
-
- if (prp->cfg.channel == 1) {
- writel(PRP_CNTL_CH1EN |
- PRP_CNTL_CSIEN |
- prp->cfg.in_fmt |
- prp->cfg.out_fmt |
- PRP_CNTL_CH1_LEN |
- PRP_CNTL_CH1BYP |
- PRP_CNTL_CH1_TSKIP(0) |
- PRP_CNTL_IN_TSKIP(0),
- pcdev->base_emma + PRP_CNTL);
- } else {
- writel(PRP_CNTL_CH2EN |
- PRP_CNTL_CSIEN |
- prp->cfg.in_fmt |
- prp->cfg.out_fmt |
- PRP_CNTL_CH2_LEN |
- PRP_CNTL_CH2_TSKIP(0) |
- PRP_CNTL_IN_TSKIP(0),
- pcdev->base_emma + PRP_CNTL);
- }
- spin_unlock_irqrestore(&pcdev->lock, flags);
-
- return 0;
-}
-
-static void mx2_stop_streaming(struct vb2_queue *q)
-{
- struct soc_camera_device *icd = soc_camera_from_vb2q(q);
- struct soc_camera_host *ici =
- to_soc_camera_host(icd->parent);
- struct mx2_camera_dev *pcdev = ici->priv;
- struct mx2_fmt_cfg *prp = pcdev->emma_prp;
- unsigned long flags;
- void *b;
- u32 cntl;
-
- spin_lock_irqsave(&pcdev->lock, flags);
-
- cntl = readl(pcdev->base_emma + PRP_CNTL);
- if (prp->cfg.channel == 1) {
- writel(cntl & ~PRP_CNTL_CH1EN,
- pcdev->base_emma + PRP_CNTL);
- } else {
- writel(cntl & ~PRP_CNTL_CH2EN,
- pcdev->base_emma + PRP_CNTL);
- }
- INIT_LIST_HEAD(&pcdev->capture);
- INIT_LIST_HEAD(&pcdev->active_bufs);
- INIT_LIST_HEAD(&pcdev->discard);
-
- b = pcdev->discard_buffer;
- pcdev->discard_buffer = NULL;
-
- spin_unlock_irqrestore(&pcdev->lock, flags);
-
- dma_free_coherent(ici->v4l2_dev.dev,
- pcdev->discard_size, b, pcdev->discard_buffer_dma);
-}
-
-static struct vb2_ops mx2_videobuf_ops = {
- .queue_setup = mx2_videobuf_setup,
- .buf_prepare = mx2_videobuf_prepare,
- .buf_queue = mx2_videobuf_queue,
- .start_streaming = mx2_start_streaming,
- .stop_streaming = mx2_stop_streaming,
-};
-
-static int mx2_camera_init_videobuf(struct vb2_queue *q,
- struct soc_camera_device *icd)
-{
- q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- q->io_modes = VB2_MMAP | VB2_USERPTR;
- q->drv_priv = icd;
- q->ops = &mx2_videobuf_ops;
- q->mem_ops = &vb2_dma_contig_memops;
- q->buf_struct_size = sizeof(struct mx2_buffer);
- q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
-
- return vb2_queue_init(q);
-}
-
-#define MX2_BUS_FLAGS (V4L2_MBUS_MASTER | \
- V4L2_MBUS_VSYNC_ACTIVE_HIGH | \
- V4L2_MBUS_VSYNC_ACTIVE_LOW | \
- V4L2_MBUS_HSYNC_ACTIVE_HIGH | \
- V4L2_MBUS_HSYNC_ACTIVE_LOW | \
- V4L2_MBUS_PCLK_SAMPLE_RISING | \
- V4L2_MBUS_PCLK_SAMPLE_FALLING | \
- V4L2_MBUS_DATA_ACTIVE_HIGH | \
- V4L2_MBUS_DATA_ACTIVE_LOW)
-
-static int mx27_camera_emma_prp_reset(struct mx2_camera_dev *pcdev)
-{
- int count = 0;
-
- readl(pcdev->base_emma + PRP_CNTL);
- writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL);
- while (count++ < 100) {
- if (!(readl(pcdev->base_emma + PRP_CNTL) & PRP_CNTL_SWRST))
- return 0;
- barrier();
- udelay(1);
- }
-
- return -ETIMEDOUT;
-}
-
-static int mx2_camera_set_bus_param(struct soc_camera_device *icd)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx2_camera_dev *pcdev = ici->priv;
- struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
- unsigned long common_flags;
- int ret;
- int bytesperline;
- u32 csicr1 = pcdev->csicr1;
-
- ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
- if (!ret) {
- common_flags = soc_mbus_config_compatible(&cfg, MX2_BUS_FLAGS);
- if (!common_flags) {
- dev_warn(icd->parent,
- "Flags incompatible: camera 0x%x, host 0x%x\n",
- cfg.flags, MX2_BUS_FLAGS);
- return -EINVAL;
- }
- } else if (ret != -ENOIOCTLCMD) {
- return ret;
- } else {
- common_flags = MX2_BUS_FLAGS;
- }
-
- if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
- (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
- if (pcdev->platform_flags & MX2_CAMERA_HSYNC_HIGH)
- common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
- else
- common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
- }
-
- if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
- (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
- if (pcdev->platform_flags & MX2_CAMERA_PCLK_SAMPLE_RISING)
- common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
- else
- common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
- }
-
- cfg.flags = common_flags;
- ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
- if (ret < 0 && ret != -ENOIOCTLCMD) {
- dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n",
- common_flags, ret);
- return ret;
- }
-
- csicr1 = (csicr1 & ~CSICR1_FMT_MASK) | pcdev->emma_prp->cfg.csicr1;
-
- if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
- csicr1 |= CSICR1_REDGE;
- if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
- csicr1 |= CSICR1_SOF_POL;
- if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
- csicr1 |= CSICR1_HSYNC_POL;
- if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC)
- csicr1 |= CSICR1_EXT_VSYNC;
- if (pcdev->platform_flags & MX2_CAMERA_CCIR)
- csicr1 |= CSICR1_CCIR_EN;
- if (pcdev->platform_flags & MX2_CAMERA_CCIR_INTERLACE)
- csicr1 |= CSICR1_CCIR_MODE;
- if (pcdev->platform_flags & MX2_CAMERA_GATED_CLOCK)
- csicr1 |= CSICR1_GCLK_MODE;
- if (pcdev->platform_flags & MX2_CAMERA_INV_DATA)
- csicr1 |= CSICR1_INV_DATA;
-
- pcdev->csicr1 = csicr1;
-
- bytesperline = soc_mbus_bytes_per_line(icd->user_width,
- icd->current_fmt->host_fmt);
- if (bytesperline < 0)
- return bytesperline;
-
- ret = mx27_camera_emma_prp_reset(pcdev);
- if (ret)
- return ret;
-
- writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
-
- return 0;
-}
-
-static int mx2_camera_set_crop(struct soc_camera_device *icd,
- const struct v4l2_crop *a)
-{
- struct v4l2_crop a_writable = *a;
- struct v4l2_rect *rect = &a_writable.c;
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct v4l2_subdev_format fmt = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- };
- struct v4l2_mbus_framefmt *mf = &fmt.format;
- int ret;
-
- soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096);
- soc_camera_limit_side(&rect->top, &rect->height, 0, 2, 4096);
-
- ret = v4l2_subdev_call(sd, video, s_crop, a);
- if (ret < 0)
- return ret;
-
- /* The capture device might have changed its output */
- ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt);
- if (ret < 0)
- return ret;
-
- dev_dbg(icd->parent, "Sensor cropped %dx%d\n",
- mf->width, mf->height);
-
- icd->user_width = mf->width;
- icd->user_height = mf->height;
-
- return ret;
-}
-
-static int mx2_camera_get_formats(struct soc_camera_device *icd,
- unsigned int idx,
- struct soc_camera_format_xlate *xlate)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- const struct soc_mbus_pixelfmt *fmt;
- struct device *dev = icd->parent;
- struct v4l2_subdev_mbus_code_enum code = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- .index = idx,
- };
- int ret, formats = 0;
-
- ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code);
- if (ret < 0)
- /* no more formats */
- return 0;
-
- fmt = soc_mbus_get_fmtdesc(code.code);
- if (!fmt) {
- dev_err(dev, "Invalid format code #%u: %d\n", idx, code.code);
- return 0;
- }
-
- if (code.code == MEDIA_BUS_FMT_YUYV8_2X8 ||
- code.code == MEDIA_BUS_FMT_UYVY8_2X8) {
- formats++;
- if (xlate) {
- /*
- * CH2 can output YUV420 which is a standard format in
- * soc_mediabus.c
- */
- xlate->host_fmt =
- soc_mbus_get_fmtdesc(MEDIA_BUS_FMT_YUYV8_1_5X8);
- xlate->code = code.code;
- dev_dbg(dev, "Providing host format %s for sensor code %d\n",
- xlate->host_fmt->name, code.code);
- xlate++;
- }
- }
-
- if (code.code == MEDIA_BUS_FMT_UYVY8_2X8) {
- formats++;
- if (xlate) {
- xlate->host_fmt =
- soc_mbus_get_fmtdesc(MEDIA_BUS_FMT_YUYV8_2X8);
- xlate->code = code.code;
- dev_dbg(dev, "Providing host format %s for sensor code %d\n",
- xlate->host_fmt->name, code.code);
- xlate++;
- }
- }
-
- /* Generic pass-trough */
- formats++;
- if (xlate) {
- xlate->host_fmt = fmt;
- xlate->code = code.code;
- xlate++;
- }
- return formats;
-}
-
-static int mx2_emmaprp_resize(struct mx2_camera_dev *pcdev,
- struct v4l2_mbus_framefmt *mf_in,
- struct v4l2_pix_format *pix_out, bool apply)
-{
- unsigned int num, den;
- unsigned long m;
- int i, dir;
-
- for (dir = RESIZE_DIR_H; dir <= RESIZE_DIR_V; dir++) {
- struct emma_prp_resize tmprsz;
- unsigned char *s = tmprsz.s;
- int len = 0;
- int in, out;
-
- if (dir == RESIZE_DIR_H) {
- in = mf_in->width;
- out = pix_out->width;
- } else {
- in = mf_in->height;
- out = pix_out->height;
- }
-
- if (in < out)
- return -EINVAL;
- else if (in == out)
- continue;
-
- /* Calculate ratio */
- m = gcd(in, out);
- num = in / m;
- den = out / m;
- if (num > RESIZE_NUM_MAX)
- return -EINVAL;
-
- if ((num >= 2 * den) && (den == 1) &&
- (num < 9) && (!(num & 0x01))) {
- int sum = 0;
- int j;
-
- /* Average scaling for >= 2:1 ratios */
- /* Support can be added for num >=9 and odd values */
-
- tmprsz.algo = RESIZE_ALGO_AVERAGING;
- len = num;
-
- for (i = 0; i < (len / 2); i++)
- s[i] = 8;
-
- do {
- for (i = 0; i < (len / 2); i++) {
- s[i] = s[i] >> 1;
- sum = 0;
- for (j = 0; j < (len / 2); j++)
- sum += s[j];
- if (sum == 4)
- break;
- }
- } while (sum != 4);
-
- for (i = (len / 2); i < len; i++)
- s[i] = s[len - i - 1];
-
- s[len - 1] |= SZ_COEF;
- } else {
- /* bilinear scaling for < 2:1 ratios */
- int v; /* overflow counter */
- int coeff, nxt; /* table output */
- int in_pos_inc = 2 * den;
- int out_pos = num;
- int out_pos_inc = 2 * num;
- int init_carry = num - den;
- int carry = init_carry;
-
- tmprsz.algo = RESIZE_ALGO_BILINEAR;
- v = den + in_pos_inc;
- do {
- coeff = v - out_pos;
- out_pos += out_pos_inc;
- carry += out_pos_inc;
- for (nxt = 0; v < out_pos; nxt++) {
- v += in_pos_inc;
- carry -= in_pos_inc;
- }
-
- if (len > RESIZE_NUM_MAX)
- return -EINVAL;
-
- coeff = ((coeff << BC_COEF) +
- (in_pos_inc >> 1)) / in_pos_inc;
-
- if (coeff >= (SZ_COEF - 1))
- coeff--;
-
- coeff |= SZ_COEF;
- s[len] = (unsigned char)coeff;
- len++;
-
- for (i = 1; i < nxt; i++) {
- if (len >= RESIZE_NUM_MAX)
- return -EINVAL;
- s[len] = 0;
- len++;
- }
- } while (carry != init_carry);
- }
- tmprsz.len = len;
- if (dir == RESIZE_DIR_H)
- mf_in->width = pix_out->width;
- else
- mf_in->height = pix_out->height;
-
- if (apply)
- memcpy(&pcdev->resizing[dir], &tmprsz, sizeof(tmprsz));
- }
- return 0;
-}
-
-static int mx2_camera_set_fmt(struct soc_camera_device *icd,
- struct v4l2_format *f)
-{
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx2_camera_dev *pcdev = ici->priv;
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- const struct soc_camera_format_xlate *xlate;
- struct v4l2_pix_format *pix = &f->fmt.pix;
- struct v4l2_subdev_format format = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- };
- struct v4l2_mbus_framefmt *mf = &format.format;
- int ret;
-
- dev_dbg(icd->parent, "%s: requested params: width = %d, height = %d\n",
- __func__, pix->width, pix->height);
-
- xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
- if (!xlate) {
- dev_warn(icd->parent, "Format %x not found\n",
- pix->pixelformat);
- return -EINVAL;
- }
-
- mf->width = pix->width;
- mf->height = pix->height;
- mf->field = pix->field;
- mf->colorspace = pix->colorspace;
- mf->code = xlate->code;
-
- ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &format);
- if (ret < 0 && ret != -ENOIOCTLCMD)
- return ret;
-
- /* Store width and height returned by the sensor for resizing */
- pcdev->s_width = mf->width;
- pcdev->s_height = mf->height;
- dev_dbg(icd->parent, "%s: sensor params: width = %d, height = %d\n",
- __func__, pcdev->s_width, pcdev->s_height);
-
- pcdev->emma_prp = mx27_emma_prp_get_format(xlate->code,
- xlate->host_fmt->fourcc);
-
- memset(pcdev->resizing, 0, sizeof(pcdev->resizing));
- if ((mf->width != pix->width || mf->height != pix->height) &&
- pcdev->emma_prp->cfg.in_fmt == PRP_CNTL_DATA_IN_YUV422) {
- if (mx2_emmaprp_resize(pcdev, mf, pix, true) < 0)
- dev_dbg(icd->parent, "%s: can't resize\n", __func__);
- }
-
- if (mf->code != xlate->code)
- return -EINVAL;
-
- pix->width = mf->width;
- pix->height = mf->height;
- pix->field = mf->field;
- pix->colorspace = mf->colorspace;
- icd->current_fmt = xlate;
-
- dev_dbg(icd->parent, "%s: returned params: width = %d, height = %d\n",
- __func__, pix->width, pix->height);
-
- return 0;
-}
-
-static int mx2_camera_try_fmt(struct soc_camera_device *icd,
- struct v4l2_format *f)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- const struct soc_camera_format_xlate *xlate;
- struct v4l2_pix_format *pix = &f->fmt.pix;
- struct v4l2_subdev_pad_config pad_cfg;
- struct v4l2_subdev_format format = {
- .which = V4L2_SUBDEV_FORMAT_TRY,
- };
- struct v4l2_mbus_framefmt *mf = &format.format;
- __u32 pixfmt = pix->pixelformat;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx2_camera_dev *pcdev = ici->priv;
- struct mx2_fmt_cfg *emma_prp;
- int ret;
-
- dev_dbg(icd->parent, "%s: requested params: width = %d, height = %d\n",
- __func__, pix->width, pix->height);
-
- xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
- if (pixfmt && !xlate) {
- dev_warn(icd->parent, "Format %x not found\n", pixfmt);
- return -EINVAL;
- }
-
- /*
- * limit to MX27 hardware capabilities: width must be a multiple of 8 as
- * requested by the CSI. (Table 39-2 in the i.MX27 Reference Manual).
- */
- pix->width &= ~0x7;
-
- /* limit to sensor capabilities */
- mf->width = pix->width;
- mf->height = pix->height;
- mf->field = pix->field;
- mf->colorspace = pix->colorspace;
- mf->code = xlate->code;
-
- ret = v4l2_subdev_call(sd, pad, set_fmt, &pad_cfg, &format);
- if (ret < 0)
- return ret;
-
- dev_dbg(icd->parent, "%s: sensor params: width = %d, height = %d\n",
- __func__, pcdev->s_width, pcdev->s_height);
-
- /* If the sensor does not support image size try PrP resizing */
- emma_prp = mx27_emma_prp_get_format(xlate->code,
- xlate->host_fmt->fourcc);
-
- if ((mf->width != pix->width || mf->height != pix->height) &&
- emma_prp->cfg.in_fmt == PRP_CNTL_DATA_IN_YUV422) {
- if (mx2_emmaprp_resize(pcdev, mf, pix, false) < 0)
- dev_dbg(icd->parent, "%s: can't resize\n", __func__);
- }
-
- if (mf->field == V4L2_FIELD_ANY)
- mf->field = V4L2_FIELD_NONE;
- /*
- * Driver supports interlaced images provided they have
- * both fields so that they can be processed as if they
- * were progressive.
- */
- if (mf->field != V4L2_FIELD_NONE && !V4L2_FIELD_HAS_BOTH(mf->field)) {
- dev_err(icd->parent, "Field type %d unsupported.\n",
- mf->field);
- return -EINVAL;
- }
-
- pix->width = mf->width;
- pix->height = mf->height;
- pix->field = mf->field;
- pix->colorspace = mf->colorspace;
-
- dev_dbg(icd->parent, "%s: returned params: width = %d, height = %d\n",
- __func__, pix->width, pix->height);
-
- return 0;
-}
-
-static int mx2_camera_querycap(struct soc_camera_host *ici,
- struct v4l2_capability *cap)
-{
- /* cap->name is set by the friendly caller:-> */
- strlcpy(cap->card, MX2_CAM_DRIVER_DESCRIPTION, sizeof(cap->card));
- cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
- cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
-
- return 0;
-}
-
-static unsigned int mx2_camera_poll(struct file *file, poll_table *pt)
-{
- struct soc_camera_device *icd = file->private_data;
-
- return vb2_poll(&icd->vb2_vidq, file, pt);
-}
-
-static struct soc_camera_host_ops mx2_soc_camera_host_ops = {
- .owner = THIS_MODULE,
- .add = mx2_camera_add_device,
- .remove = mx2_camera_remove_device,
- .clock_start = mx2_camera_clock_start,
- .clock_stop = mx2_camera_clock_stop,
- .set_fmt = mx2_camera_set_fmt,
- .set_crop = mx2_camera_set_crop,
- .get_formats = mx2_camera_get_formats,
- .try_fmt = mx2_camera_try_fmt,
- .init_videobuf2 = mx2_camera_init_videobuf,
- .poll = mx2_camera_poll,
- .querycap = mx2_camera_querycap,
- .set_bus_param = mx2_camera_set_bus_param,
-};
-
-static void mx27_camera_frame_done_emma(struct mx2_camera_dev *pcdev,
- int bufnum, bool err)
-{
-#ifdef DEBUG
- struct mx2_fmt_cfg *prp = pcdev->emma_prp;
-#endif
- struct mx2_buf_internal *ibuf;
- struct mx2_buffer *buf;
- struct vb2_buffer *vb;
- struct vb2_v4l2_buffer *vbuf;
- unsigned long phys;
-
- ibuf = list_first_entry(&pcdev->active_bufs, struct mx2_buf_internal,
- queue);
-
- BUG_ON(ibuf->bufnum != bufnum);
-
- if (ibuf->discard) {
- /*
- * Discard buffer must not be returned to user space.
- * Just return it to the discard queue.
- */
- list_move_tail(pcdev->active_bufs.next, &pcdev->discard);
- } else {
- buf = mx2_ibuf_to_buf(ibuf);
-
- vb = &buf->vb.vb2_buf;
- vbuf = to_vb2_v4l2_buffer(vb);
-#ifdef DEBUG
- phys = vb2_dma_contig_plane_dma_addr(vb, 0);
- if (prp->cfg.channel == 1) {
- if (readl(pcdev->base_emma + PRP_DEST_RGB1_PTR +
- 4 * bufnum) != phys) {
- dev_err(pcdev->dev, "%lx != %x\n", phys,
- readl(pcdev->base_emma +
- PRP_DEST_RGB1_PTR + 4 * bufnum));
- }
- } else {
- if (readl(pcdev->base_emma + PRP_DEST_Y_PTR -
- 0x14 * bufnum) != phys) {
- dev_err(pcdev->dev, "%lx != %x\n", phys,
- readl(pcdev->base_emma +
- PRP_DEST_Y_PTR - 0x14 * bufnum));
- }
- }
-#endif
- dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%p %lu\n", __func__, vb,
- vb2_plane_vaddr(vb, 0),
- vb2_get_plane_payload(vb, 0));
-
- list_del_init(&buf->internal.queue);
- vb->timestamp = ktime_get_ns();
- vbuf->sequence = pcdev->frame_count;
- if (err)
- vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
- else
- vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
- }
-
- pcdev->frame_count++;
-
- if (list_empty(&pcdev->capture)) {
- if (list_empty(&pcdev->discard)) {
- dev_warn(pcdev->dev, "%s: trying to access empty discard list\n",
- __func__);
- return;
- }
-
- ibuf = list_first_entry(&pcdev->discard,
- struct mx2_buf_internal, queue);
- ibuf->bufnum = bufnum;
-
- list_move_tail(pcdev->discard.next, &pcdev->active_bufs);
- mx27_update_emma_buf(pcdev, pcdev->discard_buffer_dma, bufnum);
- return;
- }
-
- buf = list_first_entry(&pcdev->capture, struct mx2_buffer,
- internal.queue);
-
- buf->internal.bufnum = bufnum;
-
- list_move_tail(pcdev->capture.next, &pcdev->active_bufs);
-
- vb = &buf->vb.vb2_buf;
-
- phys = vb2_dma_contig_plane_dma_addr(vb, 0);
- mx27_update_emma_buf(pcdev, phys, bufnum);
-}
-
-static irqreturn_t mx27_camera_emma_irq(int irq_emma, void *data)
-{
- struct mx2_camera_dev *pcdev = data;
- unsigned int status = readl(pcdev->base_emma + PRP_INTRSTATUS);
- struct mx2_buf_internal *ibuf;
-
- spin_lock(&pcdev->lock);
-
- if (list_empty(&pcdev->active_bufs)) {
- dev_warn(pcdev->dev, "%s: called while active list is empty\n",
- __func__);
-
- if (!status) {
- spin_unlock(&pcdev->lock);
- return IRQ_NONE;
- }
- }
-
- if (status & (1 << 7)) { /* overflow */
- u32 cntl = readl(pcdev->base_emma + PRP_CNTL);
- writel(cntl & ~(PRP_CNTL_CH1EN | PRP_CNTL_CH2EN),
- pcdev->base_emma + PRP_CNTL);
- writel(cntl, pcdev->base_emma + PRP_CNTL);
-
- ibuf = list_first_entry(&pcdev->active_bufs,
- struct mx2_buf_internal, queue);
- mx27_camera_frame_done_emma(pcdev,
- ibuf->bufnum, true);
-
- status &= ~(1 << 7);
- } else if (((status & (3 << 5)) == (3 << 5)) ||
- ((status & (3 << 3)) == (3 << 3))) {
- /*
- * Both buffers have triggered, process the one we're expecting
- * to first
- */
- ibuf = list_first_entry(&pcdev->active_bufs,
- struct mx2_buf_internal, queue);
- mx27_camera_frame_done_emma(pcdev, ibuf->bufnum, false);
- status &= ~(1 << (6 - ibuf->bufnum)); /* mark processed */
- } else if ((status & (1 << 6)) || (status & (1 << 4))) {
- mx27_camera_frame_done_emma(pcdev, 0, false);
- } else if ((status & (1 << 5)) || (status & (1 << 3))) {
- mx27_camera_frame_done_emma(pcdev, 1, false);
- }
-
- spin_unlock(&pcdev->lock);
- writel(status, pcdev->base_emma + PRP_INTRSTATUS);
-
- return IRQ_HANDLED;
-}
-
-static int mx27_camera_emma_init(struct platform_device *pdev)
-{
- struct mx2_camera_dev *pcdev = platform_get_drvdata(pdev);
- struct resource *res_emma;
- int irq_emma;
- int err = 0;
-
- res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- irq_emma = platform_get_irq(pdev, 1);
- if (!res_emma || !irq_emma) {
- dev_err(pcdev->dev, "no EMMA resources\n");
- err = -ENODEV;
- goto out;
- }
-
- pcdev->base_emma = devm_ioremap_resource(pcdev->dev, res_emma);
- if (IS_ERR(pcdev->base_emma)) {
- err = PTR_ERR(pcdev->base_emma);
- goto out;
- }
-
- err = devm_request_irq(pcdev->dev, irq_emma, mx27_camera_emma_irq, 0,
- MX2_CAM_DRV_NAME, pcdev);
- if (err) {
- dev_err(pcdev->dev, "Camera EMMA interrupt register failed\n");
- goto out;
- }
-
- pcdev->clk_emma_ipg = devm_clk_get(pcdev->dev, "emma-ipg");
- if (IS_ERR(pcdev->clk_emma_ipg)) {
- err = PTR_ERR(pcdev->clk_emma_ipg);
- goto out;
- }
-
- clk_prepare_enable(pcdev->clk_emma_ipg);
-
- pcdev->clk_emma_ahb = devm_clk_get(pcdev->dev, "emma-ahb");
- if (IS_ERR(pcdev->clk_emma_ahb)) {
- err = PTR_ERR(pcdev->clk_emma_ahb);
- goto exit_clk_emma_ipg;
- }
-
- clk_prepare_enable(pcdev->clk_emma_ahb);
-
- err = mx27_camera_emma_prp_reset(pcdev);
- if (err)
- goto exit_clk_emma_ahb;
-
- return err;
-
-exit_clk_emma_ahb:
- clk_disable_unprepare(pcdev->clk_emma_ahb);
-exit_clk_emma_ipg:
- clk_disable_unprepare(pcdev->clk_emma_ipg);
-out:
- return err;
-}
-
-static int mx2_camera_probe(struct platform_device *pdev)
-{
- struct mx2_camera_dev *pcdev;
- struct resource *res_csi;
- int irq_csi;
- int err = 0;
-
- dev_dbg(&pdev->dev, "initialising\n");
-
- res_csi = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- irq_csi = platform_get_irq(pdev, 0);
- if (res_csi == NULL || irq_csi < 0) {
- dev_err(&pdev->dev, "Missing platform resources data\n");
- err = -ENODEV;
- goto exit;
- }
-
- pcdev = devm_kzalloc(&pdev->dev, sizeof(*pcdev), GFP_KERNEL);
- if (!pcdev) {
- dev_err(&pdev->dev, "Could not allocate pcdev\n");
- err = -ENOMEM;
- goto exit;
- }
-
- pcdev->clk_csi_ahb = devm_clk_get(&pdev->dev, "ahb");
- if (IS_ERR(pcdev->clk_csi_ahb)) {
- dev_err(&pdev->dev, "Could not get csi ahb clock\n");
- err = PTR_ERR(pcdev->clk_csi_ahb);
- goto exit;
- }
-
- pcdev->clk_csi_per = devm_clk_get(&pdev->dev, "per");
- if (IS_ERR(pcdev->clk_csi_per)) {
- dev_err(&pdev->dev, "Could not get csi per clock\n");
- err = PTR_ERR(pcdev->clk_csi_per);
- goto exit;
- }
-
- pcdev->pdata = pdev->dev.platform_data;
- if (pcdev->pdata) {
- long rate;
-
- pcdev->platform_flags = pcdev->pdata->flags;
-
- rate = clk_round_rate(pcdev->clk_csi_per,
- pcdev->pdata->clk * 2);
- if (rate <= 0) {
- err = -ENODEV;
- goto exit;
- }
- err = clk_set_rate(pcdev->clk_csi_per, rate);
- if (err < 0)
- goto exit;
- }
-
- INIT_LIST_HEAD(&pcdev->capture);
- INIT_LIST_HEAD(&pcdev->active_bufs);
- INIT_LIST_HEAD(&pcdev->discard);
- spin_lock_init(&pcdev->lock);
-
- pcdev->base_csi = devm_ioremap_resource(&pdev->dev, res_csi);
- if (IS_ERR(pcdev->base_csi)) {
- err = PTR_ERR(pcdev->base_csi);
- goto exit;
- }
-
- pcdev->dev = &pdev->dev;
- platform_set_drvdata(pdev, pcdev);
-
- err = mx27_camera_emma_init(pdev);
- if (err)
- goto exit;
-
- /*
- * We're done with drvdata here. Clear the pointer so that
- * v4l2 core can start using drvdata on its purpose.
- */
- platform_set_drvdata(pdev, NULL);
-
- pcdev->soc_host.drv_name = MX2_CAM_DRV_NAME,
- pcdev->soc_host.ops = &mx2_soc_camera_host_ops,
- pcdev->soc_host.priv = pcdev;
- pcdev->soc_host.v4l2_dev.dev = &pdev->dev;
- pcdev->soc_host.nr = pdev->id;
-
- pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
- if (IS_ERR(pcdev->alloc_ctx)) {
- err = PTR_ERR(pcdev->alloc_ctx);
- goto eallocctx;
- }
- err = soc_camera_host_register(&pcdev->soc_host);
- if (err)
- goto exit_free_emma;
-
- dev_info(&pdev->dev, "MX2 Camera (CSI) driver probed, clock frequency: %ld\n",
- clk_get_rate(pcdev->clk_csi_per));
-
- return 0;
-
-exit_free_emma:
- vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx);
-eallocctx:
- clk_disable_unprepare(pcdev->clk_emma_ipg);
- clk_disable_unprepare(pcdev->clk_emma_ahb);
-exit:
- return err;
-}
-
-static int mx2_camera_remove(struct platform_device *pdev)
-{
- struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
- struct mx2_camera_dev *pcdev = container_of(soc_host,
- struct mx2_camera_dev, soc_host);
-
- soc_camera_host_unregister(&pcdev->soc_host);
-
- vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx);
-
- clk_disable_unprepare(pcdev->clk_emma_ipg);
- clk_disable_unprepare(pcdev->clk_emma_ahb);
-
- dev_info(&pdev->dev, "MX2 Camera driver unloaded\n");
-
- return 0;
-}
-
-static struct platform_driver mx2_camera_driver = {
- .driver = {
- .name = MX2_CAM_DRV_NAME,
- },
- .id_table = mx2_camera_devtype,
- .remove = mx2_camera_remove,
-};
-
-module_platform_driver_probe(mx2_camera_driver, mx2_camera_probe);
-
-MODULE_DESCRIPTION("i.MX27 SoC Camera Host driver");
-MODULE_AUTHOR("Sascha Hauer <sha@pengutronix.de>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(MX2_CAM_VERSION);
--
2.8.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/4] staging/media: remove deprecated mx3 driver
2016-06-02 7:18 [PATCH 0/4] Remove deprecated drivers Hans Verkuil
2016-06-02 7:18 ` [PATCH 1/4] staging/media: remove deprecated mx2 driver Hans Verkuil
@ 2016-06-02 7:18 ` Hans Verkuil
2016-06-02 7:18 ` [PATCH 3/4] staging/media: remove deprecated omap1 driver Hans Verkuil
2016-06-02 7:18 ` [PATCH 4/4] staging/media: remove deprecated timb driver Hans Verkuil
3 siblings, 0 replies; 5+ messages in thread
From: Hans Verkuil @ 2016-06-02 7:18 UTC (permalink / raw)
To: linux-media; +Cc: Hans Verkuil, Guennadi Liakhovetski
From: Hans Verkuil <hans.verkuil@cisco.com>
Remove this deprecated old driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/staging/media/Kconfig | 2 -
drivers/staging/media/Makefile | 1 -
drivers/staging/media/mx3/Kconfig | 15 -
drivers/staging/media/mx3/Makefile | 3 -
drivers/staging/media/mx3/TODO | 10 -
drivers/staging/media/mx3/mx3_camera.c | 1264 --------------------------------
6 files changed, 1295 deletions(-)
delete mode 100644 drivers/staging/media/mx3/Kconfig
delete mode 100644 drivers/staging/media/mx3/Makefile
delete mode 100644 drivers/staging/media/mx3/TODO
delete mode 100644 drivers/staging/media/mx3/mx3_camera.c
diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index baf6fb3..c8adade 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -27,8 +27,6 @@ source "drivers/staging/media/davinci_vpfe/Kconfig"
source "drivers/staging/media/mn88472/Kconfig"
-source "drivers/staging/media/mx3/Kconfig"
-
source "drivers/staging/media/omap1/Kconfig"
source "drivers/staging/media/omap4iss/Kconfig"
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
index 4ba7c6b..508e9ca 100644
--- a/drivers/staging/media/Makefile
+++ b/drivers/staging/media/Makefile
@@ -2,7 +2,6 @@ obj-$(CONFIG_I2C_BCM2048) += bcm2048/
obj-$(CONFIG_DVB_CXD2099) += cxd2099/
obj-$(CONFIG_LIRC_STAGING) += lirc/
obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/
-obj-$(CONFIG_VIDEO_MX3) += mx3/
obj-$(CONFIG_VIDEO_OMAP1) += omap1/
obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/
obj-$(CONFIG_DVB_MN88472) += mn88472/
diff --git a/drivers/staging/media/mx3/Kconfig b/drivers/staging/media/mx3/Kconfig
deleted file mode 100644
index 595d5fe..0000000
--- a/drivers/staging/media/mx3/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-config VIDEO_MX3
- tristate "i.MX3x Camera Sensor Interface driver"
- depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
- depends on MX3_IPU || COMPILE_TEST
- depends on HAS_DMA
- select VIDEOBUF2_DMA_CONTIG
- ---help---
- This is a v4l2 driver for the i.MX3x Camera Sensor Interface
-
- This driver is deprecated: it should become a stand-alone driver
- instead of using the soc-camera framework.
-
- Unless someone is willing to take this on (unlikely with such
- ancient hardware) it is going to be removed from the kernel
- soon.
diff --git a/drivers/staging/media/mx3/Makefile b/drivers/staging/media/mx3/Makefile
deleted file mode 100644
index 6d91dcd..0000000
--- a/drivers/staging/media/mx3/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# Makefile for i.MX3x Camera Sensor driver
-
-obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o
diff --git a/drivers/staging/media/mx3/TODO b/drivers/staging/media/mx3/TODO
deleted file mode 100644
index bc68fa4..0000000
--- a/drivers/staging/media/mx3/TODO
+++ /dev/null
@@ -1,10 +0,0 @@
-This driver is deprecated: it should become a stand-alone driver instead of
-using the soc-camera framework.
-
-Unless someone is willing to take this on (unlikely with such ancient
-hardware) it is going to be removed from the kernel soon.
-
-Note that trivial patches will not be accepted anymore, only a full conversion.
-
-If you want to convert this driver, please contact the linux-media mailinglist
-(see http://linuxtv.org/lists.php).
diff --git a/drivers/staging/media/mx3/mx3_camera.c b/drivers/staging/media/mx3/mx3_camera.c
deleted file mode 100644
index aa39e95..0000000
--- a/drivers/staging/media/mx3/mx3_camera.c
+++ /dev/null
@@ -1,1264 +0,0 @@
-/*
- * V4L2 Driver for i.MX3x camera host
- *
- * Copyright (C) 2008
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/videodev2.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/vmalloc.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/dma/ipu-dma.h>
-
-#include <media/v4l2-common.h>
-#include <media/v4l2-dev.h>
-#include <media/videobuf2-dma-contig.h>
-#include <media/soc_camera.h>
-#include <media/drv-intf/soc_mediabus.h>
-
-#include <linux/platform_data/media/camera-mx3.h>
-#include <linux/platform_data/dma-imx.h>
-
-#define MX3_CAM_DRV_NAME "mx3-camera"
-
-/* CMOS Sensor Interface Registers */
-#define CSI_REG_START 0x60
-
-#define CSI_SENS_CONF (0x60 - CSI_REG_START)
-#define CSI_SENS_FRM_SIZE (0x64 - CSI_REG_START)
-#define CSI_ACT_FRM_SIZE (0x68 - CSI_REG_START)
-#define CSI_OUT_FRM_CTRL (0x6C - CSI_REG_START)
-#define CSI_TST_CTRL (0x70 - CSI_REG_START)
-#define CSI_CCIR_CODE_1 (0x74 - CSI_REG_START)
-#define CSI_CCIR_CODE_2 (0x78 - CSI_REG_START)
-#define CSI_CCIR_CODE_3 (0x7C - CSI_REG_START)
-#define CSI_FLASH_STROBE_1 (0x80 - CSI_REG_START)
-#define CSI_FLASH_STROBE_2 (0x84 - CSI_REG_START)
-
-#define CSI_SENS_CONF_VSYNC_POL_SHIFT 0
-#define CSI_SENS_CONF_HSYNC_POL_SHIFT 1
-#define CSI_SENS_CONF_DATA_POL_SHIFT 2
-#define CSI_SENS_CONF_PIX_CLK_POL_SHIFT 3
-#define CSI_SENS_CONF_SENS_PRTCL_SHIFT 4
-#define CSI_SENS_CONF_SENS_CLKSRC_SHIFT 7
-#define CSI_SENS_CONF_DATA_FMT_SHIFT 8
-#define CSI_SENS_CONF_DATA_WIDTH_SHIFT 10
-#define CSI_SENS_CONF_EXT_VSYNC_SHIFT 15
-#define CSI_SENS_CONF_DIVRATIO_SHIFT 16
-
-#define CSI_SENS_CONF_DATA_FMT_RGB_YUV444 (0UL << CSI_SENS_CONF_DATA_FMT_SHIFT)
-#define CSI_SENS_CONF_DATA_FMT_YUV422 (2UL << CSI_SENS_CONF_DATA_FMT_SHIFT)
-#define CSI_SENS_CONF_DATA_FMT_BAYER (3UL << CSI_SENS_CONF_DATA_FMT_SHIFT)
-
-#define MAX_VIDEO_MEM 16
-
-struct mx3_camera_buffer {
- /* common v4l buffer stuff -- must be first */
- struct vb2_v4l2_buffer vb;
- struct list_head queue;
-
- /* One descriptot per scatterlist (per frame) */
- struct dma_async_tx_descriptor *txd;
-
- /* We have to "build" a scatterlist ourselves - one element per frame */
- struct scatterlist sg;
-};
-
-/**
- * struct mx3_camera_dev - i.MX3x camera (CSI) object
- * @dev: camera device, to which the coherent buffer is attached
- * @icd: currently attached camera sensor
- * @clk: pointer to clock
- * @base: remapped register base address
- * @pdata: platform data
- * @platform_flags: platform flags
- * @mclk: master clock frequency in Hz
- * @capture: list of capture videobuffers
- * @lock: protects video buffer lists
- * @active: active video buffer
- * @idmac_channel: array of pointers to IPU DMAC DMA channels
- * @soc_host: embedded soc_host object
- */
-struct mx3_camera_dev {
- /*
- * i.MX3x is only supposed to handle one camera on its Camera Sensor
- * Interface. If anyone ever builds hardware to enable more than one
- * camera _simultaneously_, they will have to modify this driver too
- */
- struct clk *clk;
-
- void __iomem *base;
-
- struct mx3_camera_pdata *pdata;
-
- unsigned long platform_flags;
- unsigned long mclk;
- u16 width_flags; /* max 15 bits */
-
- struct list_head capture;
- spinlock_t lock; /* Protects video buffer lists */
- struct mx3_camera_buffer *active;
- size_t buf_total;
- struct vb2_alloc_ctx *alloc_ctx;
- enum v4l2_field field;
- int sequence;
-
- /* IDMAC / dmaengine interface */
- struct idmac_channel *idmac_channel[1]; /* We need one channel */
-
- struct soc_camera_host soc_host;
-};
-
-struct dma_chan_request {
- struct mx3_camera_dev *mx3_cam;
- enum ipu_channel id;
-};
-
-static u32 csi_reg_read(struct mx3_camera_dev *mx3, off_t reg)
-{
- return __raw_readl(mx3->base + reg);
-}
-
-static void csi_reg_write(struct mx3_camera_dev *mx3, u32 value, off_t reg)
-{
- __raw_writel(value, mx3->base + reg);
-}
-
-static struct mx3_camera_buffer *to_mx3_vb(struct vb2_v4l2_buffer *vb)
-{
- return container_of(vb, struct mx3_camera_buffer, vb);
-}
-
-/* Called from the IPU IDMAC ISR */
-static void mx3_cam_dma_done(void *arg)
-{
- struct idmac_tx_desc *desc = to_tx_desc(arg);
- struct dma_chan *chan = desc->txd.chan;
- struct idmac_channel *ichannel = to_idmac_chan(chan);
- struct mx3_camera_dev *mx3_cam = ichannel->client;
-
- dev_dbg(chan->device->dev, "callback cookie %d, active DMA %pad\n",
- desc->txd.cookie, mx3_cam->active ? &sg_dma_address(&mx3_cam->active->sg) : NULL);
-
- spin_lock(&mx3_cam->lock);
- if (mx3_cam->active) {
- struct vb2_v4l2_buffer *vb = &mx3_cam->active->vb;
- struct mx3_camera_buffer *buf = to_mx3_vb(vb);
-
- list_del_init(&buf->queue);
- vb->vb2_buf.timestamp = ktime_get_ns();
- vb->field = mx3_cam->field;
- vb->sequence = mx3_cam->sequence++;
- vb2_buffer_done(&vb->vb2_buf, VB2_BUF_STATE_DONE);
- }
-
- if (list_empty(&mx3_cam->capture)) {
- mx3_cam->active = NULL;
- spin_unlock(&mx3_cam->lock);
-
- /*
- * stop capture - without further buffers IPU_CHA_BUF0_RDY will
- * not get updated
- */
- return;
- }
-
- mx3_cam->active = list_entry(mx3_cam->capture.next,
- struct mx3_camera_buffer, queue);
- spin_unlock(&mx3_cam->lock);
-}
-
-/*
- * Videobuf operations
- */
-
-/*
- * Calculate the __buffer__ (not data) size and number of buffers.
- */
-static int mx3_videobuf_setup(struct vb2_queue *vq,
- unsigned int *count, unsigned int *num_planes,
- unsigned int sizes[], void *alloc_ctxs[])
-{
- struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx3_camera_dev *mx3_cam = ici->priv;
-
- if (!mx3_cam->idmac_channel[0])
- return -EINVAL;
-
- alloc_ctxs[0] = mx3_cam->alloc_ctx;
-
- if (!vq->num_buffers)
- mx3_cam->sequence = 0;
-
- if (!*count)
- *count = 2;
-
- /* Called from VIDIOC_REQBUFS or in compatibility mode */
- if (!*num_planes)
- sizes[0] = icd->sizeimage;
- else if (sizes[0] < icd->sizeimage)
- return -EINVAL;
-
- /* If *num_planes != 0, we have already verified *count. */
- if (sizes[0] * *count + mx3_cam->buf_total > MAX_VIDEO_MEM * 1024 * 1024)
- *count = (MAX_VIDEO_MEM * 1024 * 1024 - mx3_cam->buf_total) /
- sizes[0];
-
- *num_planes = 1;
-
- return 0;
-}
-
-static enum pixel_fmt fourcc_to_ipu_pix(__u32 fourcc)
-{
- /* Add more formats as need arises and test possibilities appear... */
- switch (fourcc) {
- case V4L2_PIX_FMT_RGB24:
- return IPU_PIX_FMT_RGB24;
- case V4L2_PIX_FMT_UYVY:
- case V4L2_PIX_FMT_RGB565:
- default:
- return IPU_PIX_FMT_GENERIC;
- }
-}
-
-static void mx3_videobuf_queue(struct vb2_buffer *vb)
-{
- struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
- struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx3_camera_dev *mx3_cam = ici->priv;
- struct mx3_camera_buffer *buf = to_mx3_vb(vbuf);
- struct scatterlist *sg = &buf->sg;
- struct dma_async_tx_descriptor *txd;
- struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
- struct idmac_video_param *video = &ichan->params.video;
- const struct soc_mbus_pixelfmt *host_fmt = icd->current_fmt->host_fmt;
- dma_cookie_t cookie;
- size_t new_size;
-
- new_size = icd->sizeimage;
-
- if (vb2_plane_size(vb, 0) < new_size) {
- dev_err(icd->parent, "Buffer #%d too small (%lu < %zu)\n",
- vbuf->vb2_buf.index, vb2_plane_size(vb, 0), new_size);
- goto error;
- }
-
- if (!buf->txd) {
- sg_dma_address(sg) = vb2_dma_contig_plane_dma_addr(vb, 0);
- sg_dma_len(sg) = new_size;
-
- txd = dmaengine_prep_slave_sg(
- &ichan->dma_chan, sg, 1, DMA_DEV_TO_MEM,
- DMA_PREP_INTERRUPT);
- if (!txd)
- goto error;
-
- txd->callback_param = txd;
- txd->callback = mx3_cam_dma_done;
-
- buf->txd = txd;
- } else {
- txd = buf->txd;
- }
-
- vb2_set_plane_payload(vb, 0, new_size);
-
- /* This is the configuration of one sg-element */
- video->out_pixel_fmt = fourcc_to_ipu_pix(host_fmt->fourcc);
-
- if (video->out_pixel_fmt == IPU_PIX_FMT_GENERIC) {
- /*
- * If the IPU DMA channel is configured to transfer generic
- * 8-bit data, we have to set up the geometry parameters
- * correctly, according to the current pixel format. The DMA
- * horizontal parameters in this case are expressed in bytes,
- * not in pixels.
- */
- video->out_width = icd->bytesperline;
- video->out_height = icd->user_height;
- video->out_stride = icd->bytesperline;
- } else {
- /*
- * For IPU known formats the pixel unit will be managed
- * successfully by the IPU code
- */
- video->out_width = icd->user_width;
- video->out_height = icd->user_height;
- video->out_stride = icd->user_width;
- }
-
-#ifdef DEBUG
- /* helps to see what DMA actually has written */
- if (vb2_plane_vaddr(vb, 0))
- memset(vb2_plane_vaddr(vb, 0), 0xaa, vb2_get_plane_payload(vb, 0));
-#endif
-
- spin_lock_irq(&mx3_cam->lock);
- list_add_tail(&buf->queue, &mx3_cam->capture);
-
- if (!mx3_cam->active)
- mx3_cam->active = buf;
-
- spin_unlock_irq(&mx3_cam->lock);
-
- cookie = txd->tx_submit(txd);
- dev_dbg(icd->parent, "Submitted cookie %d DMA %pad\n",
- cookie, &sg_dma_address(&buf->sg));
-
- if (cookie >= 0)
- return;
-
- spin_lock_irq(&mx3_cam->lock);
-
- /* Submit error */
- list_del_init(&buf->queue);
-
- if (mx3_cam->active == buf)
- mx3_cam->active = NULL;
-
- spin_unlock_irq(&mx3_cam->lock);
-error:
- vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
-}
-
-static void mx3_videobuf_release(struct vb2_buffer *vb)
-{
- struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
- struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx3_camera_dev *mx3_cam = ici->priv;
- struct mx3_camera_buffer *buf = to_mx3_vb(vbuf);
- struct dma_async_tx_descriptor *txd = buf->txd;
- unsigned long flags;
-
- dev_dbg(icd->parent,
- "Release%s DMA %pad, queue %sempty\n",
- mx3_cam->active == buf ? " active" : "", &sg_dma_address(&buf->sg),
- list_empty(&buf->queue) ? "" : "not ");
-
- spin_lock_irqsave(&mx3_cam->lock, flags);
-
- if (mx3_cam->active == buf)
- mx3_cam->active = NULL;
-
- /* Doesn't hurt also if the list is empty */
- list_del_init(&buf->queue);
-
- if (txd) {
- buf->txd = NULL;
- if (mx3_cam->idmac_channel[0])
- async_tx_ack(txd);
- }
-
- spin_unlock_irqrestore(&mx3_cam->lock, flags);
-
- mx3_cam->buf_total -= vb2_plane_size(vb, 0);
-}
-
-static int mx3_videobuf_init(struct vb2_buffer *vb)
-{
- struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
- struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx3_camera_dev *mx3_cam = ici->priv;
- struct mx3_camera_buffer *buf = to_mx3_vb(vbuf);
-
- if (!buf->txd) {
- /* This is for locking debugging only */
- INIT_LIST_HEAD(&buf->queue);
- sg_init_table(&buf->sg, 1);
-
- mx3_cam->buf_total += vb2_plane_size(vb, 0);
- }
-
- return 0;
-}
-
-static void mx3_stop_streaming(struct vb2_queue *q)
-{
- struct soc_camera_device *icd = soc_camera_from_vb2q(q);
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx3_camera_dev *mx3_cam = ici->priv;
- struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
- struct mx3_camera_buffer *buf, *tmp;
- unsigned long flags;
-
- if (ichan)
- dmaengine_pause(&ichan->dma_chan);
-
- spin_lock_irqsave(&mx3_cam->lock, flags);
-
- mx3_cam->active = NULL;
-
- list_for_each_entry_safe(buf, tmp, &mx3_cam->capture, queue) {
- list_del_init(&buf->queue);
- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
- }
-
- spin_unlock_irqrestore(&mx3_cam->lock, flags);
-}
-
-static struct vb2_ops mx3_videobuf_ops = {
- .queue_setup = mx3_videobuf_setup,
- .buf_queue = mx3_videobuf_queue,
- .buf_cleanup = mx3_videobuf_release,
- .buf_init = mx3_videobuf_init,
- .wait_prepare = vb2_ops_wait_prepare,
- .wait_finish = vb2_ops_wait_finish,
- .stop_streaming = mx3_stop_streaming,
-};
-
-static int mx3_camera_init_videobuf(struct vb2_queue *q,
- struct soc_camera_device *icd)
-{
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-
- q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- q->io_modes = VB2_MMAP | VB2_USERPTR;
- q->drv_priv = icd;
- q->ops = &mx3_videobuf_ops;
- q->mem_ops = &vb2_dma_contig_memops;
- q->buf_struct_size = sizeof(struct mx3_camera_buffer);
- q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
- q->lock = &ici->host_lock;
-
- return vb2_queue_init(q);
-}
-
-/* First part of ipu_csi_init_interface() */
-static void mx3_camera_activate(struct mx3_camera_dev *mx3_cam)
-{
- u32 conf;
- long rate;
-
- /* Set default size: ipu_csi_set_window_size() */
- csi_reg_write(mx3_cam, (640 - 1) | ((480 - 1) << 16), CSI_ACT_FRM_SIZE);
- /* ...and position to 0:0: ipu_csi_set_window_pos() */
- conf = csi_reg_read(mx3_cam, CSI_OUT_FRM_CTRL) & 0xffff0000;
- csi_reg_write(mx3_cam, conf, CSI_OUT_FRM_CTRL);
-
- /* We use only gated clock synchronisation mode so far */
- conf = 0 << CSI_SENS_CONF_SENS_PRTCL_SHIFT;
-
- /* Set generic data, platform-biggest bus-width */
- conf |= CSI_SENS_CONF_DATA_FMT_BAYER;
-
- if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15)
- conf |= 3 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
- else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10)
- conf |= 2 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
- else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8)
- conf |= 1 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
- else/* if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4)*/
- conf |= 0 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
-
- if (mx3_cam->platform_flags & MX3_CAMERA_CLK_SRC)
- conf |= 1 << CSI_SENS_CONF_SENS_CLKSRC_SHIFT;
- if (mx3_cam->platform_flags & MX3_CAMERA_EXT_VSYNC)
- conf |= 1 << CSI_SENS_CONF_EXT_VSYNC_SHIFT;
- if (mx3_cam->platform_flags & MX3_CAMERA_DP)
- conf |= 1 << CSI_SENS_CONF_DATA_POL_SHIFT;
- if (mx3_cam->platform_flags & MX3_CAMERA_PCP)
- conf |= 1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT;
- if (mx3_cam->platform_flags & MX3_CAMERA_HSP)
- conf |= 1 << CSI_SENS_CONF_HSYNC_POL_SHIFT;
- if (mx3_cam->platform_flags & MX3_CAMERA_VSP)
- conf |= 1 << CSI_SENS_CONF_VSYNC_POL_SHIFT;
-
- /* ipu_csi_init_interface() */
- csi_reg_write(mx3_cam, conf, CSI_SENS_CONF);
-
- clk_prepare_enable(mx3_cam->clk);
- rate = clk_round_rate(mx3_cam->clk, mx3_cam->mclk);
- dev_dbg(mx3_cam->soc_host.v4l2_dev.dev, "Set SENS_CONF to %x, rate %ld\n", conf, rate);
- if (rate)
- clk_set_rate(mx3_cam->clk, rate);
-}
-
-static int mx3_camera_add_device(struct soc_camera_device *icd)
-{
- dev_info(icd->parent, "MX3 Camera driver attached to camera %d\n",
- icd->devnum);
-
- return 0;
-}
-
-static void mx3_camera_remove_device(struct soc_camera_device *icd)
-{
- dev_info(icd->parent, "MX3 Camera driver detached from camera %d\n",
- icd->devnum);
-}
-
-/* Called with .host_lock held */
-static int mx3_camera_clock_start(struct soc_camera_host *ici)
-{
- struct mx3_camera_dev *mx3_cam = ici->priv;
-
- mx3_camera_activate(mx3_cam);
-
- mx3_cam->buf_total = 0;
-
- return 0;
-}
-
-/* Called with .host_lock held */
-static void mx3_camera_clock_stop(struct soc_camera_host *ici)
-{
- struct mx3_camera_dev *mx3_cam = ici->priv;
- struct idmac_channel **ichan = &mx3_cam->idmac_channel[0];
-
- if (*ichan) {
- dma_release_channel(&(*ichan)->dma_chan);
- *ichan = NULL;
- }
-
- clk_disable_unprepare(mx3_cam->clk);
-}
-
-static int test_platform_param(struct mx3_camera_dev *mx3_cam,
- unsigned char buswidth, unsigned long *flags)
-{
- /*
- * If requested data width is supported by the platform, use it or any
- * possible lower value - i.MX31 is smart enough to shift bits
- */
- if (buswidth > fls(mx3_cam->width_flags))
- return -EINVAL;
-
- /*
- * Platform specified synchronization and pixel clock polarities are
- * only a recommendation and are only used during probing. MX3x
- * camera interface only works in master mode, i.e., uses HSYNC and
- * VSYNC signals from the sensor
- */
- *flags = V4L2_MBUS_MASTER |
- V4L2_MBUS_HSYNC_ACTIVE_HIGH |
- V4L2_MBUS_HSYNC_ACTIVE_LOW |
- V4L2_MBUS_VSYNC_ACTIVE_HIGH |
- V4L2_MBUS_VSYNC_ACTIVE_LOW |
- V4L2_MBUS_PCLK_SAMPLE_RISING |
- V4L2_MBUS_PCLK_SAMPLE_FALLING |
- V4L2_MBUS_DATA_ACTIVE_HIGH |
- V4L2_MBUS_DATA_ACTIVE_LOW;
-
- return 0;
-}
-
-static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
- const unsigned int depth)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx3_camera_dev *mx3_cam = ici->priv;
- struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
- unsigned long bus_flags, common_flags;
- int ret = test_platform_param(mx3_cam, depth, &bus_flags);
-
- dev_dbg(icd->parent, "request bus width %d bit: %d\n", depth, ret);
-
- if (ret < 0)
- return ret;
-
- ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
- if (!ret) {
- common_flags = soc_mbus_config_compatible(&cfg,
- bus_flags);
- if (!common_flags) {
- dev_warn(icd->parent,
- "Flags incompatible: camera 0x%x, host 0x%lx\n",
- cfg.flags, bus_flags);
- return -EINVAL;
- }
- } else if (ret != -ENOIOCTLCMD) {
- return ret;
- }
-
- return 0;
-}
-
-static bool chan_filter(struct dma_chan *chan, void *arg)
-{
- struct dma_chan_request *rq = arg;
- struct mx3_camera_pdata *pdata;
-
- if (!imx_dma_is_ipu(chan))
- return false;
-
- if (!rq)
- return false;
-
- pdata = rq->mx3_cam->soc_host.v4l2_dev.dev->platform_data;
-
- return rq->id == chan->chan_id &&
- pdata->dma_dev == chan->device->dev;
-}
-
-static const struct soc_mbus_pixelfmt mx3_camera_formats[] = {
- {
- .fourcc = V4L2_PIX_FMT_SBGGR8,
- .name = "Bayer BGGR (sRGB) 8 bit",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_NONE,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- }, {
- .fourcc = V4L2_PIX_FMT_GREY,
- .name = "Monochrome 8 bit",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_NONE,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-};
-
-/* This will be corrected as we get more formats */
-static bool mx3_camera_packing_supported(const struct soc_mbus_pixelfmt *fmt)
-{
- return fmt->packing == SOC_MBUS_PACKING_NONE ||
- (fmt->bits_per_sample == 8 &&
- fmt->packing == SOC_MBUS_PACKING_2X8_PADHI) ||
- (fmt->bits_per_sample > 8 &&
- fmt->packing == SOC_MBUS_PACKING_EXTEND16);
-}
-
-static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int idx,
- struct soc_camera_format_xlate *xlate)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct device *dev = icd->parent;
- int formats = 0, ret;
- struct v4l2_subdev_mbus_code_enum code = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- .index = idx,
- };
- const struct soc_mbus_pixelfmt *fmt;
-
- ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code);
- if (ret < 0)
- /* No more formats */
- return 0;
-
- fmt = soc_mbus_get_fmtdesc(code.code);
- if (!fmt) {
- dev_warn(icd->parent,
- "Unsupported format code #%u: 0x%x\n", idx, code.code);
- return 0;
- }
-
- /* This also checks support for the requested bits-per-sample */
- ret = mx3_camera_try_bus_param(icd, fmt->bits_per_sample);
- if (ret < 0)
- return 0;
-
- switch (code.code) {
- case MEDIA_BUS_FMT_SBGGR10_1X10:
- formats++;
- if (xlate) {
- xlate->host_fmt = &mx3_camera_formats[0];
- xlate->code = code.code;
- xlate++;
- dev_dbg(dev, "Providing format %s using code 0x%x\n",
- mx3_camera_formats[0].name, code.code);
- }
- break;
- case MEDIA_BUS_FMT_Y10_1X10:
- formats++;
- if (xlate) {
- xlate->host_fmt = &mx3_camera_formats[1];
- xlate->code = code.code;
- xlate++;
- dev_dbg(dev, "Providing format %s using code 0x%x\n",
- mx3_camera_formats[1].name, code.code);
- }
- break;
- default:
- if (!mx3_camera_packing_supported(fmt))
- return 0;
- }
-
- /* Generic pass-through */
- formats++;
- if (xlate) {
- xlate->host_fmt = fmt;
- xlate->code = code.code;
- dev_dbg(dev, "Providing format %c%c%c%c in pass-through mode\n",
- (fmt->fourcc >> (0*8)) & 0xFF,
- (fmt->fourcc >> (1*8)) & 0xFF,
- (fmt->fourcc >> (2*8)) & 0xFF,
- (fmt->fourcc >> (3*8)) & 0xFF);
- xlate++;
- }
-
- return formats;
-}
-
-static void configure_geometry(struct mx3_camera_dev *mx3_cam,
- unsigned int width, unsigned int height,
- const struct soc_mbus_pixelfmt *fmt)
-{
- u32 ctrl, width_field, height_field;
-
- if (fourcc_to_ipu_pix(fmt->fourcc) == IPU_PIX_FMT_GENERIC) {
- /*
- * As the CSI will be configured to output BAYER, here
- * the width parameter count the number of samples to
- * capture to complete the whole image width.
- */
- unsigned int num, den;
- int ret = soc_mbus_samples_per_pixel(fmt, &num, &den);
- BUG_ON(ret < 0);
- width = width * num / den;
- }
-
- /* Setup frame size - this cannot be changed on-the-fly... */
- width_field = width - 1;
- height_field = height - 1;
- csi_reg_write(mx3_cam, width_field | (height_field << 16), CSI_SENS_FRM_SIZE);
-
- csi_reg_write(mx3_cam, width_field << 16, CSI_FLASH_STROBE_1);
- csi_reg_write(mx3_cam, (height_field << 16) | 0x22, CSI_FLASH_STROBE_2);
-
- csi_reg_write(mx3_cam, width_field | (height_field << 16), CSI_ACT_FRM_SIZE);
-
- /* ...and position */
- ctrl = csi_reg_read(mx3_cam, CSI_OUT_FRM_CTRL) & 0xffff0000;
- /* Sensor does the cropping */
- csi_reg_write(mx3_cam, ctrl | 0 | (0 << 8), CSI_OUT_FRM_CTRL);
-}
-
-static int acquire_dma_channel(struct mx3_camera_dev *mx3_cam)
-{
- dma_cap_mask_t mask;
- struct dma_chan *chan;
- struct idmac_channel **ichan = &mx3_cam->idmac_channel[0];
- /* We have to use IDMAC_IC_7 for Bayer / generic data */
- struct dma_chan_request rq = {.mx3_cam = mx3_cam,
- .id = IDMAC_IC_7};
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_cap_set(DMA_PRIVATE, mask);
- chan = dma_request_channel(mask, chan_filter, &rq);
- if (!chan)
- return -EBUSY;
-
- *ichan = to_idmac_chan(chan);
- (*ichan)->client = mx3_cam;
-
- return 0;
-}
-
-/*
- * FIXME: learn to use stride != width, then we can keep stride properly aligned
- * and support arbitrary (even) widths.
- */
-static inline void stride_align(__u32 *width)
-{
- if (ALIGN(*width, 8) < 4096)
- *width = ALIGN(*width, 8);
- else
- *width = *width & ~7;
-}
-
-/*
- * As long as we don't implement host-side cropping and scaling, we can use
- * default g_crop and cropcap from soc_camera.c
- */
-static int mx3_camera_set_crop(struct soc_camera_device *icd,
- const struct v4l2_crop *a)
-{
- struct v4l2_crop a_writable = *a;
- struct v4l2_rect *rect = &a_writable.c;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx3_camera_dev *mx3_cam = ici->priv;
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct v4l2_subdev_format fmt = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- };
- struct v4l2_mbus_framefmt *mf = &fmt.format;
- int ret;
-
- soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096);
- soc_camera_limit_side(&rect->top, &rect->height, 0, 2, 4096);
-
- ret = v4l2_subdev_call(sd, video, s_crop, a);
- if (ret < 0)
- return ret;
-
- /* The capture device might have changed its output sizes */
- ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt);
- if (ret < 0)
- return ret;
-
- if (mf->code != icd->current_fmt->code)
- return -EINVAL;
-
- if (mf->width & 7) {
- /* Ouch! We can only handle 8-byte aligned width... */
- stride_align(&mf->width);
- ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &fmt);
- if (ret < 0)
- return ret;
- }
-
- if (mf->width != icd->user_width || mf->height != icd->user_height)
- configure_geometry(mx3_cam, mf->width, mf->height,
- icd->current_fmt->host_fmt);
-
- dev_dbg(icd->parent, "Sensor cropped %dx%d\n",
- mf->width, mf->height);
-
- icd->user_width = mf->width;
- icd->user_height = mf->height;
-
- return ret;
-}
-
-static int mx3_camera_set_fmt(struct soc_camera_device *icd,
- struct v4l2_format *f)
-{
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx3_camera_dev *mx3_cam = ici->priv;
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- const struct soc_camera_format_xlate *xlate;
- struct v4l2_pix_format *pix = &f->fmt.pix;
- struct v4l2_subdev_format format = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- };
- struct v4l2_mbus_framefmt *mf = &format.format;
- int ret;
-
- xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
- if (!xlate) {
- dev_warn(icd->parent, "Format %x not found\n",
- pix->pixelformat);
- return -EINVAL;
- }
-
- stride_align(&pix->width);
- dev_dbg(icd->parent, "Set format %dx%d\n", pix->width, pix->height);
-
- /*
- * Might have to perform a complete interface initialisation like in
- * ipu_csi_init_interface() in mxc_v4l2_s_param(). Also consider
- * mxc_v4l2_s_fmt()
- */
-
- configure_geometry(mx3_cam, pix->width, pix->height, xlate->host_fmt);
-
- mf->width = pix->width;
- mf->height = pix->height;
- mf->field = pix->field;
- mf->colorspace = pix->colorspace;
- mf->code = xlate->code;
-
- ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &format);
- if (ret < 0)
- return ret;
-
- if (mf->code != xlate->code)
- return -EINVAL;
-
- if (!mx3_cam->idmac_channel[0]) {
- ret = acquire_dma_channel(mx3_cam);
- if (ret < 0)
- return ret;
- }
-
- pix->width = mf->width;
- pix->height = mf->height;
- pix->field = mf->field;
- mx3_cam->field = mf->field;
- pix->colorspace = mf->colorspace;
- icd->current_fmt = xlate;
-
- dev_dbg(icd->parent, "Sensor set %dx%d\n", pix->width, pix->height);
-
- return ret;
-}
-
-static int mx3_camera_try_fmt(struct soc_camera_device *icd,
- struct v4l2_format *f)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- const struct soc_camera_format_xlate *xlate;
- struct v4l2_pix_format *pix = &f->fmt.pix;
- struct v4l2_subdev_pad_config pad_cfg;
- struct v4l2_subdev_format format = {
- .which = V4L2_SUBDEV_FORMAT_TRY,
- };
- struct v4l2_mbus_framefmt *mf = &format.format;
- __u32 pixfmt = pix->pixelformat;
- int ret;
-
- xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
- if (pixfmt && !xlate) {
- dev_warn(icd->parent, "Format %x not found\n", pixfmt);
- return -EINVAL;
- }
-
- /* limit to MX3 hardware capabilities */
- if (pix->height > 4096)
- pix->height = 4096;
- if (pix->width > 4096)
- pix->width = 4096;
-
- /* limit to sensor capabilities */
- mf->width = pix->width;
- mf->height = pix->height;
- mf->field = pix->field;
- mf->colorspace = pix->colorspace;
- mf->code = xlate->code;
-
- ret = v4l2_subdev_call(sd, pad, set_fmt, &pad_cfg, &format);
- if (ret < 0)
- return ret;
-
- pix->width = mf->width;
- pix->height = mf->height;
- pix->colorspace = mf->colorspace;
-
- switch (mf->field) {
- case V4L2_FIELD_ANY:
- pix->field = V4L2_FIELD_NONE;
- break;
- case V4L2_FIELD_NONE:
- break;
- default:
- dev_err(icd->parent, "Field type %d unsupported.\n",
- mf->field);
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static int mx3_camera_reqbufs(struct soc_camera_device *icd,
- struct v4l2_requestbuffers *p)
-{
- return 0;
-}
-
-static unsigned int mx3_camera_poll(struct file *file, poll_table *pt)
-{
- struct soc_camera_device *icd = file->private_data;
-
- return vb2_poll(&icd->vb2_vidq, file, pt);
-}
-
-static int mx3_camera_querycap(struct soc_camera_host *ici,
- struct v4l2_capability *cap)
-{
- /* cap->name is set by the firendly caller:-> */
- strlcpy(cap->card, "i.MX3x Camera", sizeof(cap->card));
- cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
- cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
-
- return 0;
-}
-
-static int mx3_camera_set_bus_param(struct soc_camera_device *icd)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx3_camera_dev *mx3_cam = ici->priv;
- struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
- u32 pixfmt = icd->current_fmt->host_fmt->fourcc;
- unsigned long bus_flags, common_flags;
- u32 dw, sens_conf;
- const struct soc_mbus_pixelfmt *fmt;
- int buswidth;
- int ret;
- const struct soc_camera_format_xlate *xlate;
- struct device *dev = icd->parent;
-
- fmt = soc_mbus_get_fmtdesc(icd->current_fmt->code);
- if (!fmt)
- return -EINVAL;
-
- xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
- if (!xlate) {
- dev_warn(dev, "Format %x not found\n", pixfmt);
- return -EINVAL;
- }
-
- buswidth = fmt->bits_per_sample;
- ret = test_platform_param(mx3_cam, buswidth, &bus_flags);
-
- dev_dbg(dev, "requested bus width %d bit: %d\n", buswidth, ret);
-
- if (ret < 0)
- return ret;
-
- ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
- if (!ret) {
- common_flags = soc_mbus_config_compatible(&cfg,
- bus_flags);
- if (!common_flags) {
- dev_warn(icd->parent,
- "Flags incompatible: camera 0x%x, host 0x%lx\n",
- cfg.flags, bus_flags);
- return -EINVAL;
- }
- } else if (ret != -ENOIOCTLCMD) {
- return ret;
- } else {
- common_flags = bus_flags;
- }
-
- dev_dbg(dev, "Flags cam: 0x%x host: 0x%lx common: 0x%lx\n",
- cfg.flags, bus_flags, common_flags);
-
- /* Make choices, based on platform preferences */
- if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
- (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
- if (mx3_cam->platform_flags & MX3_CAMERA_HSP)
- common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
- else
- common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
- }
-
- if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
- (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
- if (mx3_cam->platform_flags & MX3_CAMERA_VSP)
- common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
- else
- common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
- }
-
- if ((common_flags & V4L2_MBUS_DATA_ACTIVE_HIGH) &&
- (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)) {
- if (mx3_cam->platform_flags & MX3_CAMERA_DP)
- common_flags &= ~V4L2_MBUS_DATA_ACTIVE_HIGH;
- else
- common_flags &= ~V4L2_MBUS_DATA_ACTIVE_LOW;
- }
-
- if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
- (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
- if (mx3_cam->platform_flags & MX3_CAMERA_PCP)
- common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
- else
- common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
- }
-
- cfg.flags = common_flags;
- ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
- if (ret < 0 && ret != -ENOIOCTLCMD) {
- dev_dbg(dev, "camera s_mbus_config(0x%lx) returned %d\n",
- common_flags, ret);
- return ret;
- }
-
- /*
- * So far only gated clock mode is supported. Add a line
- * (3 << CSI_SENS_CONF_SENS_PRTCL_SHIFT) |
- * below and select the required mode when supporting other
- * synchronisation protocols.
- */
- sens_conf = csi_reg_read(mx3_cam, CSI_SENS_CONF) &
- ~((1 << CSI_SENS_CONF_VSYNC_POL_SHIFT) |
- (1 << CSI_SENS_CONF_HSYNC_POL_SHIFT) |
- (1 << CSI_SENS_CONF_DATA_POL_SHIFT) |
- (1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT) |
- (3 << CSI_SENS_CONF_DATA_FMT_SHIFT) |
- (3 << CSI_SENS_CONF_DATA_WIDTH_SHIFT));
-
- /* TODO: Support RGB and YUV formats */
-
- /* This has been set in mx3_camera_activate(), but we clear it above */
- sens_conf |= CSI_SENS_CONF_DATA_FMT_BAYER;
-
- if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
- sens_conf |= 1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT;
- if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
- sens_conf |= 1 << CSI_SENS_CONF_HSYNC_POL_SHIFT;
- if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
- sens_conf |= 1 << CSI_SENS_CONF_VSYNC_POL_SHIFT;
- if (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)
- sens_conf |= 1 << CSI_SENS_CONF_DATA_POL_SHIFT;
-
- /* Just do what we're asked to do */
- switch (xlate->host_fmt->bits_per_sample) {
- case 4:
- dw = 0 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
- break;
- case 8:
- dw = 1 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
- break;
- case 10:
- dw = 2 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
- break;
- default:
- /*
- * Actually it can only be 15 now, default is just to silence
- * compiler warnings
- */
- case 15:
- dw = 3 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
- }
-
- csi_reg_write(mx3_cam, sens_conf | dw, CSI_SENS_CONF);
-
- dev_dbg(dev, "Set SENS_CONF to %x\n", sens_conf | dw);
-
- return 0;
-}
-
-static struct soc_camera_host_ops mx3_soc_camera_host_ops = {
- .owner = THIS_MODULE,
- .add = mx3_camera_add_device,
- .remove = mx3_camera_remove_device,
- .clock_start = mx3_camera_clock_start,
- .clock_stop = mx3_camera_clock_stop,
- .set_crop = mx3_camera_set_crop,
- .set_fmt = mx3_camera_set_fmt,
- .try_fmt = mx3_camera_try_fmt,
- .get_formats = mx3_camera_get_formats,
- .init_videobuf2 = mx3_camera_init_videobuf,
- .reqbufs = mx3_camera_reqbufs,
- .poll = mx3_camera_poll,
- .querycap = mx3_camera_querycap,
- .set_bus_param = mx3_camera_set_bus_param,
-};
-
-static int mx3_camera_probe(struct platform_device *pdev)
-{
- struct mx3_camera_pdata *pdata = pdev->dev.platform_data;
- struct mx3_camera_dev *mx3_cam;
- struct resource *res;
- void __iomem *base;
- int err = 0;
- struct soc_camera_host *soc_host;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
-
- if (!pdata)
- return -EINVAL;
-
- mx3_cam = devm_kzalloc(&pdev->dev, sizeof(*mx3_cam), GFP_KERNEL);
- if (!mx3_cam) {
- dev_err(&pdev->dev, "Could not allocate mx3 camera object\n");
- return -ENOMEM;
- }
-
- mx3_cam->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(mx3_cam->clk))
- return PTR_ERR(mx3_cam->clk);
-
- mx3_cam->pdata = pdata;
- mx3_cam->platform_flags = pdata->flags;
- if (!(mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_MASK)) {
- /*
- * Platform hasn't set available data widths. This is bad.
- * Warn and use a default.
- */
- dev_warn(&pdev->dev, "WARNING! Platform hasn't set available "
- "data widths, using default 8 bit\n");
- mx3_cam->platform_flags |= MX3_CAMERA_DATAWIDTH_8;
- }
- if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4)
- mx3_cam->width_flags = 1 << 3;
- if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8)
- mx3_cam->width_flags |= 1 << 7;
- if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10)
- mx3_cam->width_flags |= 1 << 9;
- if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15)
- mx3_cam->width_flags |= 1 << 14;
-
- mx3_cam->mclk = pdata->mclk_10khz * 10000;
- if (!mx3_cam->mclk) {
- dev_warn(&pdev->dev,
- "mclk_10khz == 0! Please, fix your platform data. "
- "Using default 20MHz\n");
- mx3_cam->mclk = 20000000;
- }
-
- /* list of video-buffers */
- INIT_LIST_HEAD(&mx3_cam->capture);
- spin_lock_init(&mx3_cam->lock);
-
- mx3_cam->base = base;
-
- soc_host = &mx3_cam->soc_host;
- soc_host->drv_name = MX3_CAM_DRV_NAME;
- soc_host->ops = &mx3_soc_camera_host_ops;
- soc_host->priv = mx3_cam;
- soc_host->v4l2_dev.dev = &pdev->dev;
- soc_host->nr = pdev->id;
-
- mx3_cam->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
- if (IS_ERR(mx3_cam->alloc_ctx))
- return PTR_ERR(mx3_cam->alloc_ctx);
-
- if (pdata->asd_sizes) {
- soc_host->asd = pdata->asd;
- soc_host->asd_sizes = pdata->asd_sizes;
- }
-
- err = soc_camera_host_register(soc_host);
- if (err)
- goto ecamhostreg;
-
- /* IDMAC interface */
- dmaengine_get();
-
- return 0;
-
-ecamhostreg:
- vb2_dma_contig_cleanup_ctx(mx3_cam->alloc_ctx);
- return err;
-}
-
-static int mx3_camera_remove(struct platform_device *pdev)
-{
- struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
- struct mx3_camera_dev *mx3_cam = container_of(soc_host,
- struct mx3_camera_dev, soc_host);
-
- soc_camera_host_unregister(soc_host);
-
- /*
- * The channel has either not been allocated,
- * or should have been released
- */
- if (WARN_ON(mx3_cam->idmac_channel[0]))
- dma_release_channel(&mx3_cam->idmac_channel[0]->dma_chan);
-
- vb2_dma_contig_cleanup_ctx(mx3_cam->alloc_ctx);
-
- dmaengine_put();
-
- return 0;
-}
-
-static struct platform_driver mx3_camera_driver = {
- .driver = {
- .name = MX3_CAM_DRV_NAME,
- },
- .probe = mx3_camera_probe,
- .remove = mx3_camera_remove,
-};
-
-module_platform_driver(mx3_camera_driver);
-
-MODULE_DESCRIPTION("i.MX3x SoC Camera Host driver");
-MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION("0.2.3");
-MODULE_ALIAS("platform:" MX3_CAM_DRV_NAME);
--
2.8.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 3/4] staging/media: remove deprecated omap1 driver
2016-06-02 7:18 [PATCH 0/4] Remove deprecated drivers Hans Verkuil
2016-06-02 7:18 ` [PATCH 1/4] staging/media: remove deprecated mx2 driver Hans Verkuil
2016-06-02 7:18 ` [PATCH 2/4] staging/media: remove deprecated mx3 driver Hans Verkuil
@ 2016-06-02 7:18 ` Hans Verkuil
2016-06-02 7:18 ` [PATCH 4/4] staging/media: remove deprecated timb driver Hans Verkuil
3 siblings, 0 replies; 5+ messages in thread
From: Hans Verkuil @ 2016-06-02 7:18 UTC (permalink / raw)
To: linux-media; +Cc: Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
Remove this deprecated old driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
drivers/staging/media/Kconfig | 2 -
drivers/staging/media/Makefile | 1 -
drivers/staging/media/omap1/Kconfig | 13 -
drivers/staging/media/omap1/Makefile | 3 -
drivers/staging/media/omap1/TODO | 8 -
drivers/staging/media/omap1/omap1_camera.c | 1702 ----------------------------
6 files changed, 1729 deletions(-)
delete mode 100644 drivers/staging/media/omap1/Kconfig
delete mode 100644 drivers/staging/media/omap1/Makefile
delete mode 100644 drivers/staging/media/omap1/TODO
delete mode 100644 drivers/staging/media/omap1/omap1_camera.c
diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index c8adade..c6878cd 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -27,8 +27,6 @@ source "drivers/staging/media/davinci_vpfe/Kconfig"
source "drivers/staging/media/mn88472/Kconfig"
-source "drivers/staging/media/omap1/Kconfig"
-
source "drivers/staging/media/omap4iss/Kconfig"
source "drivers/staging/media/timb/Kconfig"
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
index 508e9ca..9c89b3e 100644
--- a/drivers/staging/media/Makefile
+++ b/drivers/staging/media/Makefile
@@ -2,7 +2,6 @@ obj-$(CONFIG_I2C_BCM2048) += bcm2048/
obj-$(CONFIG_DVB_CXD2099) += cxd2099/
obj-$(CONFIG_LIRC_STAGING) += lirc/
obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/
-obj-$(CONFIG_VIDEO_OMAP1) += omap1/
obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/
obj-$(CONFIG_DVB_MN88472) += mn88472/
obj-$(CONFIG_VIDEO_TIMBERDALE) += timb/
diff --git a/drivers/staging/media/omap1/Kconfig b/drivers/staging/media/omap1/Kconfig
deleted file mode 100644
index 6cfab3a..0000000
--- a/drivers/staging/media/omap1/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-config VIDEO_OMAP1
- tristate "OMAP1 Camera Interface driver"
- depends on VIDEO_DEV && SOC_CAMERA
- depends on ARCH_OMAP1
- depends on HAS_DMA
- select VIDEOBUF_DMA_CONTIG
- select VIDEOBUF_DMA_SG
- ---help---
- This is a v4l2 driver for the TI OMAP1 camera interface
-
- This driver is deprecated and will be removed soon unless someone
- will start the work to convert this driver to the vb2 framework
- and remove the soc-camera dependency.
diff --git a/drivers/staging/media/omap1/Makefile b/drivers/staging/media/omap1/Makefile
deleted file mode 100644
index 2885622..0000000
--- a/drivers/staging/media/omap1/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# Makefile for OMAP1 driver
-
-obj-$(CONFIG_VIDEO_OMAP1) += omap1_camera.o
diff --git a/drivers/staging/media/omap1/TODO b/drivers/staging/media/omap1/TODO
deleted file mode 100644
index 1025f9f..0000000
--- a/drivers/staging/media/omap1/TODO
+++ /dev/null
@@ -1,8 +0,0 @@
-This driver is deprecated and will be removed soon unless someone will start
-the work to convert this driver to the vb2 framework and remove the
-soc-camera dependency.
-
-Note that trivial patches will not be accepted anymore, only a full conversion.
-
-If you want to convert this driver, please contact the linux-media mailinglist
-(see http://linuxtv.org/lists.php).
diff --git a/drivers/staging/media/omap1/omap1_camera.c b/drivers/staging/media/omap1/omap1_camera.c
deleted file mode 100644
index 54b8dd2..0000000
--- a/drivers/staging/media/omap1/omap1_camera.c
+++ /dev/null
@@ -1,1702 +0,0 @@
-/*
- * V4L2 SoC Camera driver for OMAP1 Camera Interface
- *
- * Copyright (C) 2010, Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
- *
- * Based on V4L2 Driver for i.MXL/i.MXL camera (CSI) host
- * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
- *
- * Based on PXA SoC camera driver
- * Copyright (C) 2006, Sascha Hauer, Pengutronix
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * Hardware specific bits initialy based on former work by Matt Callow
- * drivers/media/platform/omap/omap1510cam.c
- * Copyright (C) 2006 Matt Callow
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <linux/platform_data/media/omap1_camera.h>
-#include <media/soc_camera.h>
-#include <media/drv-intf/soc_mediabus.h>
-#include <media/videobuf-dma-contig.h>
-#include <media/videobuf-dma-sg.h>
-
-#include <linux/omap-dma.h>
-
-
-#define DRIVER_NAME "omap1-camera"
-#define DRIVER_VERSION "0.0.2"
-
-#define OMAP_DMA_CAMERA_IF_RX 20
-
-/*
- * ---------------------------------------------------------------------------
- * OMAP1 Camera Interface registers
- * ---------------------------------------------------------------------------
- */
-
-#define REG_CTRLCLOCK 0x00
-#define REG_IT_STATUS 0x04
-#define REG_MODE 0x08
-#define REG_STATUS 0x0C
-#define REG_CAMDATA 0x10
-#define REG_GPIO 0x14
-#define REG_PEAK_COUNTER 0x18
-
-/* CTRLCLOCK bit shifts */
-#define LCLK_EN BIT(7)
-#define DPLL_EN BIT(6)
-#define MCLK_EN BIT(5)
-#define CAMEXCLK_EN BIT(4)
-#define POLCLK BIT(3)
-#define FOSCMOD_SHIFT 0
-#define FOSCMOD_MASK (0x7 << FOSCMOD_SHIFT)
-#define FOSCMOD_12MHz 0x0
-#define FOSCMOD_6MHz 0x2
-#define FOSCMOD_9_6MHz 0x4
-#define FOSCMOD_24MHz 0x5
-#define FOSCMOD_8MHz 0x6
-
-/* IT_STATUS bit shifts */
-#define DATA_TRANSFER BIT(5)
-#define FIFO_FULL BIT(4)
-#define H_DOWN BIT(3)
-#define H_UP BIT(2)
-#define V_DOWN BIT(1)
-#define V_UP BIT(0)
-
-/* MODE bit shifts */
-#define RAZ_FIFO BIT(18)
-#define EN_FIFO_FULL BIT(17)
-#define EN_NIRQ BIT(16)
-#define THRESHOLD_SHIFT 9
-#define THRESHOLD_MASK (0x7f << THRESHOLD_SHIFT)
-#define DMA BIT(8)
-#define EN_H_DOWN BIT(7)
-#define EN_H_UP BIT(6)
-#define EN_V_DOWN BIT(5)
-#define EN_V_UP BIT(4)
-#define ORDERCAMD BIT(3)
-
-#define IRQ_MASK (EN_V_UP | EN_V_DOWN | EN_H_UP | EN_H_DOWN | \
- EN_NIRQ | EN_FIFO_FULL)
-
-/* STATUS bit shifts */
-#define HSTATUS BIT(1)
-#define VSTATUS BIT(0)
-
-/* GPIO bit shifts */
-#define CAM_RST BIT(0)
-
-/* end of OMAP1 Camera Interface registers */
-
-
-#define SOCAM_BUS_FLAGS (V4L2_MBUS_MASTER | \
- V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH | \
- V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING | \
- V4L2_MBUS_DATA_ACTIVE_HIGH)
-
-
-#define FIFO_SIZE ((THRESHOLD_MASK >> THRESHOLD_SHIFT) + 1)
-#define FIFO_SHIFT __fls(FIFO_SIZE)
-
-#define DMA_BURST_SHIFT (1 + OMAP_DMA_DATA_BURST_4)
-#define DMA_BURST_SIZE (1 << DMA_BURST_SHIFT)
-
-#define DMA_ELEMENT_SHIFT OMAP_DMA_DATA_TYPE_S32
-#define DMA_ELEMENT_SIZE (1 << DMA_ELEMENT_SHIFT)
-
-#define DMA_FRAME_SHIFT_CONTIG (FIFO_SHIFT - 1)
-#define DMA_FRAME_SHIFT_SG DMA_BURST_SHIFT
-
-#define DMA_FRAME_SHIFT(x) ((x) == OMAP1_CAM_DMA_CONTIG ? \
- DMA_FRAME_SHIFT_CONTIG : \
- DMA_FRAME_SHIFT_SG)
-#define DMA_FRAME_SIZE(x) (1 << DMA_FRAME_SHIFT(x))
-#define DMA_SYNC OMAP_DMA_SYNC_FRAME
-#define THRESHOLD_LEVEL DMA_FRAME_SIZE
-
-
-#define MAX_VIDEO_MEM 4 /* arbitrary video memory limit in MB */
-
-
-/*
- * Structures
- */
-
-/* buffer for one video frame */
-struct omap1_cam_buf {
- struct videobuf_buffer vb;
- u32 code;
- int inwork;
- struct scatterlist *sgbuf;
- int sgcount;
- int bytes_left;
- enum videobuf_state result;
-};
-
-struct omap1_cam_dev {
- struct soc_camera_host soc_host;
- struct clk *clk;
-
- unsigned int irq;
- void __iomem *base;
-
- int dma_ch;
-
- struct omap1_cam_platform_data *pdata;
- struct resource *res;
- unsigned long pflags;
- unsigned long camexclk;
-
- struct list_head capture;
-
- /* lock used to protect videobuf */
- spinlock_t lock;
-
- /* Pointers to DMA buffers */
- struct omap1_cam_buf *active;
- struct omap1_cam_buf *ready;
-
- enum omap1_cam_vb_mode vb_mode;
- int (*mmap_mapper)(struct videobuf_queue *q,
- struct videobuf_buffer *buf,
- struct vm_area_struct *vma);
-
- u32 reg_cache[0];
-};
-
-
-static void cam_write(struct omap1_cam_dev *pcdev, u16 reg, u32 val)
-{
- pcdev->reg_cache[reg / sizeof(u32)] = val;
- __raw_writel(val, pcdev->base + reg);
-}
-
-static u32 cam_read(struct omap1_cam_dev *pcdev, u16 reg, bool from_cache)
-{
- return !from_cache ? __raw_readl(pcdev->base + reg) :
- pcdev->reg_cache[reg / sizeof(u32)];
-}
-
-#define CAM_READ(pcdev, reg) \
- cam_read(pcdev, REG_##reg, false)
-#define CAM_WRITE(pcdev, reg, val) \
- cam_write(pcdev, REG_##reg, val)
-#define CAM_READ_CACHE(pcdev, reg) \
- cam_read(pcdev, REG_##reg, true)
-
-/*
- * Videobuf operations
- */
-static int omap1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
- unsigned int *size)
-{
- struct soc_camera_device *icd = vq->priv_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct omap1_cam_dev *pcdev = ici->priv;
-
- *size = icd->sizeimage;
-
- if (!*count || *count < OMAP1_CAMERA_MIN_BUF_COUNT(pcdev->vb_mode))
- *count = OMAP1_CAMERA_MIN_BUF_COUNT(pcdev->vb_mode);
-
- if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
- *count = (MAX_VIDEO_MEM * 1024 * 1024) / *size;
-
- dev_dbg(icd->parent,
- "%s: count=%d, size=%d\n", __func__, *count, *size);
-
- return 0;
-}
-
-static void free_buffer(struct videobuf_queue *vq, struct omap1_cam_buf *buf,
- enum omap1_cam_vb_mode vb_mode)
-{
- struct videobuf_buffer *vb = &buf->vb;
-
- BUG_ON(in_interrupt());
-
- videobuf_waiton(vq, vb, 0, 0);
-
- if (vb_mode == OMAP1_CAM_DMA_CONTIG) {
- videobuf_dma_contig_free(vq, vb);
- } else {
- struct soc_camera_device *icd = vq->priv_data;
- struct device *dev = icd->parent;
- struct videobuf_dmabuf *dma = videobuf_to_dma(vb);
-
- videobuf_dma_unmap(dev, dma);
- videobuf_dma_free(dma);
- }
-
- vb->state = VIDEOBUF_NEEDS_INIT;
-}
-
-static int omap1_videobuf_prepare(struct videobuf_queue *vq,
- struct videobuf_buffer *vb, enum v4l2_field field)
-{
- struct soc_camera_device *icd = vq->priv_data;
- struct omap1_cam_buf *buf = container_of(vb, struct omap1_cam_buf, vb);
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct omap1_cam_dev *pcdev = ici->priv;
- int ret;
-
- WARN_ON(!list_empty(&vb->queue));
-
- BUG_ON(NULL == icd->current_fmt);
-
- buf->inwork = 1;
-
- if (buf->code != icd->current_fmt->code || vb->field != field ||
- vb->width != icd->user_width ||
- vb->height != icd->user_height) {
- buf->code = icd->current_fmt->code;
- vb->width = icd->user_width;
- vb->height = icd->user_height;
- vb->field = field;
- vb->state = VIDEOBUF_NEEDS_INIT;
- }
-
- vb->size = icd->sizeimage;
-
- if (vb->baddr && vb->bsize < vb->size) {
- ret = -EINVAL;
- goto out;
- }
-
- if (vb->state == VIDEOBUF_NEEDS_INIT) {
- ret = videobuf_iolock(vq, vb, NULL);
- if (ret)
- goto fail;
-
- vb->state = VIDEOBUF_PREPARED;
- }
- buf->inwork = 0;
-
- return 0;
-fail:
- free_buffer(vq, buf, pcdev->vb_mode);
-out:
- buf->inwork = 0;
- return ret;
-}
-
-static void set_dma_dest_params(int dma_ch, struct omap1_cam_buf *buf,
- enum omap1_cam_vb_mode vb_mode)
-{
- dma_addr_t dma_addr;
- unsigned int block_size;
-
- if (vb_mode == OMAP1_CAM_DMA_CONTIG) {
- dma_addr = videobuf_to_dma_contig(&buf->vb);
- block_size = buf->vb.size;
- } else {
- if (WARN_ON(!buf->sgbuf)) {
- buf->result = VIDEOBUF_ERROR;
- return;
- }
- dma_addr = sg_dma_address(buf->sgbuf);
- if (WARN_ON(!dma_addr)) {
- buf->sgbuf = NULL;
- buf->result = VIDEOBUF_ERROR;
- return;
- }
- block_size = sg_dma_len(buf->sgbuf);
- if (WARN_ON(!block_size)) {
- buf->sgbuf = NULL;
- buf->result = VIDEOBUF_ERROR;
- return;
- }
- if (unlikely(buf->bytes_left < block_size))
- block_size = buf->bytes_left;
- if (WARN_ON(dma_addr & (DMA_FRAME_SIZE(vb_mode) *
- DMA_ELEMENT_SIZE - 1))) {
- dma_addr = ALIGN(dma_addr, DMA_FRAME_SIZE(vb_mode) *
- DMA_ELEMENT_SIZE);
- block_size &= ~(DMA_FRAME_SIZE(vb_mode) *
- DMA_ELEMENT_SIZE - 1);
- }
- buf->bytes_left -= block_size;
- buf->sgcount++;
- }
-
- omap_set_dma_dest_params(dma_ch,
- OMAP_DMA_PORT_EMIFF, OMAP_DMA_AMODE_POST_INC, dma_addr, 0, 0);
- omap_set_dma_transfer_params(dma_ch,
- OMAP_DMA_DATA_TYPE_S32, DMA_FRAME_SIZE(vb_mode),
- block_size >> (DMA_FRAME_SHIFT(vb_mode) + DMA_ELEMENT_SHIFT),
- DMA_SYNC, 0, 0);
-}
-
-static struct omap1_cam_buf *prepare_next_vb(struct omap1_cam_dev *pcdev)
-{
- struct omap1_cam_buf *buf;
-
- /*
- * If there is already a buffer pointed out by the pcdev->ready,
- * (re)use it, otherwise try to fetch and configure a new one.
- */
- buf = pcdev->ready;
- if (!buf) {
- if (list_empty(&pcdev->capture))
- return buf;
- buf = list_entry(pcdev->capture.next,
- struct omap1_cam_buf, vb.queue);
- buf->vb.state = VIDEOBUF_ACTIVE;
- pcdev->ready = buf;
- list_del_init(&buf->vb.queue);
- }
-
- if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
- /*
- * In CONTIG mode, we can safely enter next buffer parameters
- * into the DMA programming register set after the DMA
- * has already been activated on the previous buffer
- */
- set_dma_dest_params(pcdev->dma_ch, buf, pcdev->vb_mode);
- } else {
- /*
- * In SG mode, the above is not safe since there are probably
- * a bunch of sgbufs from previous sglist still pending.
- * Instead, mark the sglist fresh for the upcoming
- * try_next_sgbuf().
- */
- buf->sgbuf = NULL;
- }
-
- return buf;
-}
-
-static struct scatterlist *try_next_sgbuf(int dma_ch, struct omap1_cam_buf *buf)
-{
- struct scatterlist *sgbuf;
-
- if (likely(buf->sgbuf)) {
- /* current sglist is active */
- if (unlikely(!buf->bytes_left)) {
- /* indicate sglist complete */
- sgbuf = NULL;
- } else {
- /* process next sgbuf */
- sgbuf = sg_next(buf->sgbuf);
- if (WARN_ON(!sgbuf)) {
- buf->result = VIDEOBUF_ERROR;
- } else if (WARN_ON(!sg_dma_len(sgbuf))) {
- sgbuf = NULL;
- buf->result = VIDEOBUF_ERROR;
- }
- }
- buf->sgbuf = sgbuf;
- } else {
- /* sglist is fresh, initialize it before using */
- struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb);
-
- sgbuf = dma->sglist;
- if (!(WARN_ON(!sgbuf))) {
- buf->sgbuf = sgbuf;
- buf->sgcount = 0;
- buf->bytes_left = buf->vb.size;
- buf->result = VIDEOBUF_DONE;
- }
- }
- if (sgbuf)
- /*
- * Put our next sgbuf parameters (address, size)
- * into the DMA programming register set.
- */
- set_dma_dest_params(dma_ch, buf, OMAP1_CAM_DMA_SG);
-
- return sgbuf;
-}
-
-static void start_capture(struct omap1_cam_dev *pcdev)
-{
- struct omap1_cam_buf *buf = pcdev->active;
- u32 ctrlclock = CAM_READ_CACHE(pcdev, CTRLCLOCK);
- u32 mode = CAM_READ_CACHE(pcdev, MODE) & ~EN_V_DOWN;
-
- if (WARN_ON(!buf))
- return;
-
- /*
- * Enable start of frame interrupt, which we will use for activating
- * our end of frame watchdog when capture actually starts.
- */
- mode |= EN_V_UP;
-
- if (unlikely(ctrlclock & LCLK_EN))
- /* stop pixel clock before FIFO reset */
- CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~LCLK_EN);
- /* reset FIFO */
- CAM_WRITE(pcdev, MODE, mode | RAZ_FIFO);
-
- omap_start_dma(pcdev->dma_ch);
-
- if (pcdev->vb_mode == OMAP1_CAM_DMA_SG) {
- /*
- * In SG mode, it's a good moment for fetching next sgbuf
- * from the current sglist and, if available, already putting
- * its parameters into the DMA programming register set.
- */
- try_next_sgbuf(pcdev->dma_ch, buf);
- }
-
- /* (re)enable pixel clock */
- CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock | LCLK_EN);
- /* release FIFO reset */
- CAM_WRITE(pcdev, MODE, mode);
-}
-
-static void suspend_capture(struct omap1_cam_dev *pcdev)
-{
- u32 ctrlclock = CAM_READ_CACHE(pcdev, CTRLCLOCK);
-
- CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~LCLK_EN);
- omap_stop_dma(pcdev->dma_ch);
-}
-
-static void disable_capture(struct omap1_cam_dev *pcdev)
-{
- u32 mode = CAM_READ_CACHE(pcdev, MODE);
-
- CAM_WRITE(pcdev, MODE, mode & ~(IRQ_MASK | DMA));
-}
-
-static void omap1_videobuf_queue(struct videobuf_queue *vq,
- struct videobuf_buffer *vb)
-{
- struct soc_camera_device *icd = vq->priv_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct omap1_cam_dev *pcdev = ici->priv;
- struct omap1_cam_buf *buf;
- u32 mode;
-
- list_add_tail(&vb->queue, &pcdev->capture);
- vb->state = VIDEOBUF_QUEUED;
-
- if (pcdev->active) {
- /*
- * Capture in progress, so don't touch pcdev->ready even if
- * empty. Since the transfer of the DMA programming register set
- * content to the DMA working register set is done automatically
- * by the DMA hardware, this can pretty well happen while we
- * are keeping the lock here. Leave fetching it from the queue
- * to be done when a next DMA interrupt occures instead.
- */
- return;
- }
-
- WARN_ON(pcdev->ready);
-
- buf = prepare_next_vb(pcdev);
- if (WARN_ON(!buf))
- return;
-
- pcdev->active = buf;
- pcdev->ready = NULL;
-
- dev_dbg(icd->parent,
- "%s: capture not active, setup FIFO, start DMA\n", __func__);
- mode = CAM_READ_CACHE(pcdev, MODE) & ~THRESHOLD_MASK;
- mode |= THRESHOLD_LEVEL(pcdev->vb_mode) << THRESHOLD_SHIFT;
- CAM_WRITE(pcdev, MODE, mode | EN_FIFO_FULL | DMA);
-
- if (pcdev->vb_mode == OMAP1_CAM_DMA_SG) {
- /*
- * In SG mode, the above prepare_next_vb() didn't actually
- * put anything into the DMA programming register set,
- * so we have to do it now, before activating DMA.
- */
- try_next_sgbuf(pcdev->dma_ch, buf);
- }
-
- start_capture(pcdev);
-}
-
-static void omap1_videobuf_release(struct videobuf_queue *vq,
- struct videobuf_buffer *vb)
-{
- struct omap1_cam_buf *buf =
- container_of(vb, struct omap1_cam_buf, vb);
- struct soc_camera_device *icd = vq->priv_data;
- struct device *dev = icd->parent;
- struct soc_camera_host *ici = to_soc_camera_host(dev);
- struct omap1_cam_dev *pcdev = ici->priv;
-
- switch (vb->state) {
- case VIDEOBUF_DONE:
- dev_dbg(dev, "%s (done)\n", __func__);
- break;
- case VIDEOBUF_ACTIVE:
- dev_dbg(dev, "%s (active)\n", __func__);
- break;
- case VIDEOBUF_QUEUED:
- dev_dbg(dev, "%s (queued)\n", __func__);
- break;
- case VIDEOBUF_PREPARED:
- dev_dbg(dev, "%s (prepared)\n", __func__);
- break;
- default:
- dev_dbg(dev, "%s (unknown %d)\n", __func__, vb->state);
- break;
- }
-
- free_buffer(vq, buf, pcdev->vb_mode);
-}
-
-static void videobuf_done(struct omap1_cam_dev *pcdev,
- enum videobuf_state result)
-{
- struct omap1_cam_buf *buf = pcdev->active;
- struct videobuf_buffer *vb;
- struct device *dev = pcdev->soc_host.icd->parent;
-
- if (WARN_ON(!buf)) {
- suspend_capture(pcdev);
- disable_capture(pcdev);
- return;
- }
-
- if (result == VIDEOBUF_ERROR)
- suspend_capture(pcdev);
-
- vb = &buf->vb;
- if (waitqueue_active(&vb->done)) {
- if (!pcdev->ready && result != VIDEOBUF_ERROR) {
- /*
- * No next buffer has been entered into the DMA
- * programming register set on time (could be done only
- * while the previous DMA interurpt was processed, not
- * later), so the last DMA block, be it a whole buffer
- * if in CONTIG or its last sgbuf if in SG mode, is
- * about to be reused by the just autoreinitialized DMA
- * engine, and overwritten with next frame data. Best we
- * can do is stopping the capture as soon as possible,
- * hopefully before the next frame start.
- */
- suspend_capture(pcdev);
- }
- vb->state = result;
- v4l2_get_timestamp(&vb->ts);
- if (result != VIDEOBUF_ERROR)
- vb->field_count++;
- wake_up(&vb->done);
-
- /* shift in next buffer */
- buf = pcdev->ready;
- pcdev->active = buf;
- pcdev->ready = NULL;
-
- if (!buf) {
- /*
- * No next buffer was ready on time (see above), so
- * indicate error condition to force capture restart or
- * stop, depending on next buffer already queued or not.
- */
- result = VIDEOBUF_ERROR;
- prepare_next_vb(pcdev);
-
- buf = pcdev->ready;
- pcdev->active = buf;
- pcdev->ready = NULL;
- }
- } else if (pcdev->ready) {
- /*
- * In both CONTIG and SG mode, the DMA engine has possibly
- * been already autoreinitialized with the preprogrammed
- * pcdev->ready buffer. We can either accept this fact
- * and just swap the buffers, or provoke an error condition
- * and restart capture. The former seems less intrusive.
- */
- dev_dbg(dev, "%s: nobody waiting on videobuf, swap with next\n",
- __func__);
- pcdev->active = pcdev->ready;
-
- if (pcdev->vb_mode == OMAP1_CAM_DMA_SG) {
- /*
- * In SG mode, we have to make sure that the buffer we
- * are putting back into the pcdev->ready is marked
- * fresh.
- */
- buf->sgbuf = NULL;
- }
- pcdev->ready = buf;
-
- buf = pcdev->active;
- } else {
- /*
- * No next buffer has been entered into
- * the DMA programming register set on time.
- */
- if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
- /*
- * In CONTIG mode, the DMA engine has already been
- * reinitialized with the current buffer. Best we can do
- * is not touching it.
- */
- dev_dbg(dev,
- "%s: nobody waiting on videobuf, reuse it\n",
- __func__);
- } else {
- /*
- * In SG mode, the DMA engine has just been
- * autoreinitialized with the last sgbuf from the
- * current list. Restart capture in order to transfer
- * next frame start into the first sgbuf, not the last
- * one.
- */
- if (result != VIDEOBUF_ERROR) {
- suspend_capture(pcdev);
- result = VIDEOBUF_ERROR;
- }
- }
- }
-
- if (!buf) {
- dev_dbg(dev, "%s: no more videobufs, stop capture\n", __func__);
- disable_capture(pcdev);
- return;
- }
-
- if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
- /*
- * In CONTIG mode, the current buffer parameters had already
- * been entered into the DMA programming register set while the
- * buffer was fetched with prepare_next_vb(), they may have also
- * been transferred into the runtime set and already active if
- * the DMA still running.
- */
- } else {
- /* In SG mode, extra steps are required */
- if (result == VIDEOBUF_ERROR)
- /* make sure we (re)use sglist from start on error */
- buf->sgbuf = NULL;
-
- /*
- * In any case, enter the next sgbuf parameters into the DMA
- * programming register set. They will be used either during
- * nearest DMA autoreinitialization or, in case of an error,
- * on DMA startup below.
- */
- try_next_sgbuf(pcdev->dma_ch, buf);
- }
-
- if (result == VIDEOBUF_ERROR) {
- dev_dbg(dev, "%s: videobuf error; reset FIFO, restart DMA\n",
- __func__);
- start_capture(pcdev);
- /*
- * In SG mode, the above also resulted in the next sgbuf
- * parameters being entered into the DMA programming register
- * set, making them ready for next DMA autoreinitialization.
- */
- }
-
- /*
- * Finally, try fetching next buffer.
- * In CONTIG mode, it will also enter it into the DMA programming
- * register set, making it ready for next DMA autoreinitialization.
- */
- prepare_next_vb(pcdev);
-}
-
-static void dma_isr(int channel, unsigned short status, void *data)
-{
- struct omap1_cam_dev *pcdev = data;
- struct omap1_cam_buf *buf = pcdev->active;
- unsigned long flags;
-
- spin_lock_irqsave(&pcdev->lock, flags);
-
- if (WARN_ON(!buf)) {
- suspend_capture(pcdev);
- disable_capture(pcdev);
- goto out;
- }
-
- if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
- /*
- * In CONTIG mode, assume we have just managed to collect the
- * whole frame, hopefully before our end of frame watchdog is
- * triggered. Then, all we have to do is disabling the watchdog
- * for this frame, and calling videobuf_done() with success
- * indicated.
- */
- CAM_WRITE(pcdev, MODE,
- CAM_READ_CACHE(pcdev, MODE) & ~EN_V_DOWN);
- videobuf_done(pcdev, VIDEOBUF_DONE);
- } else {
- /*
- * In SG mode, we have to process every sgbuf from the current
- * sglist, one after another.
- */
- if (buf->sgbuf) {
- /*
- * Current sglist not completed yet, try fetching next
- * sgbuf, hopefully putting it into the DMA programming
- * register set, making it ready for next DMA
- * autoreinitialization.
- */
- try_next_sgbuf(pcdev->dma_ch, buf);
- if (buf->sgbuf)
- goto out;
-
- /*
- * No more sgbufs left in the current sglist. This
- * doesn't mean that the whole videobuffer is already
- * complete, but only that the last sgbuf from the
- * current sglist is about to be filled. It will be
- * ready on next DMA interrupt, signalled with the
- * buf->sgbuf set back to NULL.
- */
- if (buf->result != VIDEOBUF_ERROR) {
- /*
- * Video frame collected without errors so far,
- * we can prepare for collecting a next one
- * as soon as DMA gets autoreinitialized
- * after the current (last) sgbuf is completed.
- */
- buf = prepare_next_vb(pcdev);
- if (!buf)
- goto out;
-
- try_next_sgbuf(pcdev->dma_ch, buf);
- goto out;
- }
- }
- /* end of videobuf */
- videobuf_done(pcdev, buf->result);
- }
-
-out:
- spin_unlock_irqrestore(&pcdev->lock, flags);
-}
-
-static irqreturn_t cam_isr(int irq, void *data)
-{
- struct omap1_cam_dev *pcdev = data;
- struct device *dev = pcdev->soc_host.icd->parent;
- struct omap1_cam_buf *buf = pcdev->active;
- u32 it_status;
- unsigned long flags;
-
- it_status = CAM_READ(pcdev, IT_STATUS);
- if (!it_status)
- return IRQ_NONE;
-
- spin_lock_irqsave(&pcdev->lock, flags);
-
- if (WARN_ON(!buf)) {
- dev_warn(dev, "%s: unhandled camera interrupt, status == %#x\n",
- __func__, it_status);
- suspend_capture(pcdev);
- disable_capture(pcdev);
- goto out;
- }
-
- if (unlikely(it_status & FIFO_FULL)) {
- dev_warn(dev, "%s: FIFO overflow\n", __func__);
-
- } else if (it_status & V_DOWN) {
- /* end of video frame watchdog */
- if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
- /*
- * In CONTIG mode, the watchdog is disabled with
- * successful DMA end of block interrupt, and reenabled
- * on next frame start. If we get here, there is nothing
- * to check, we must be out of sync.
- */
- } else {
- if (buf->sgcount == 2) {
- /*
- * If exactly 2 sgbufs from the next sglist have
- * been programmed into the DMA engine (the
- * first one already transferred into the DMA
- * runtime register set, the second one still
- * in the programming set), then we are in sync.
- */
- goto out;
- }
- }
- dev_notice(dev, "%s: unexpected end of video frame\n",
- __func__);
-
- } else if (it_status & V_UP) {
- u32 mode;
-
- if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
- /*
- * In CONTIG mode, we need this interrupt every frame
- * in oredr to reenable our end of frame watchdog.
- */
- mode = CAM_READ_CACHE(pcdev, MODE);
- } else {
- /*
- * In SG mode, the below enabled end of frame watchdog
- * is kept on permanently, so we can turn this one shot
- * setup off.
- */
- mode = CAM_READ_CACHE(pcdev, MODE) & ~EN_V_UP;
- }
-
- if (!(mode & EN_V_DOWN)) {
- /* (re)enable end of frame watchdog interrupt */
- mode |= EN_V_DOWN;
- }
- CAM_WRITE(pcdev, MODE, mode);
- goto out;
-
- } else {
- dev_warn(dev, "%s: unhandled camera interrupt, status == %#x\n",
- __func__, it_status);
- goto out;
- }
-
- videobuf_done(pcdev, VIDEOBUF_ERROR);
-out:
- spin_unlock_irqrestore(&pcdev->lock, flags);
- return IRQ_HANDLED;
-}
-
-static struct videobuf_queue_ops omap1_videobuf_ops = {
- .buf_setup = omap1_videobuf_setup,
- .buf_prepare = omap1_videobuf_prepare,
- .buf_queue = omap1_videobuf_queue,
- .buf_release = omap1_videobuf_release,
-};
-
-
-/*
- * SOC Camera host operations
- */
-
-static void sensor_reset(struct omap1_cam_dev *pcdev, bool reset)
-{
- /* apply/release camera sensor reset if requested by platform data */
- if (pcdev->pflags & OMAP1_CAMERA_RST_HIGH)
- CAM_WRITE(pcdev, GPIO, reset);
- else if (pcdev->pflags & OMAP1_CAMERA_RST_LOW)
- CAM_WRITE(pcdev, GPIO, !reset);
-}
-
-static int omap1_cam_add_device(struct soc_camera_device *icd)
-{
- dev_dbg(icd->parent, "OMAP1 Camera driver attached to camera %d\n",
- icd->devnum);
-
- return 0;
-}
-
-static void omap1_cam_remove_device(struct soc_camera_device *icd)
-{
- dev_dbg(icd->parent,
- "OMAP1 Camera driver detached from camera %d\n", icd->devnum);
-}
-
-/*
- * The following two functions absolutely depend on the fact, that
- * there can be only one camera on OMAP1 camera sensor interface
- */
-static int omap1_cam_clock_start(struct soc_camera_host *ici)
-{
- struct omap1_cam_dev *pcdev = ici->priv;
- u32 ctrlclock;
-
- clk_enable(pcdev->clk);
-
- /* setup sensor clock */
- ctrlclock = CAM_READ(pcdev, CTRLCLOCK);
- ctrlclock &= ~(CAMEXCLK_EN | MCLK_EN | DPLL_EN);
- CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
-
- ctrlclock &= ~FOSCMOD_MASK;
- switch (pcdev->camexclk) {
- case 6000000:
- ctrlclock |= CAMEXCLK_EN | FOSCMOD_6MHz;
- break;
- case 8000000:
- ctrlclock |= CAMEXCLK_EN | FOSCMOD_8MHz | DPLL_EN;
- break;
- case 9600000:
- ctrlclock |= CAMEXCLK_EN | FOSCMOD_9_6MHz | DPLL_EN;
- break;
- case 12000000:
- ctrlclock |= CAMEXCLK_EN | FOSCMOD_12MHz;
- break;
- case 24000000:
- ctrlclock |= CAMEXCLK_EN | FOSCMOD_24MHz | DPLL_EN;
- default:
- break;
- }
- CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~DPLL_EN);
-
- /* enable internal clock */
- ctrlclock |= MCLK_EN;
- CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
-
- sensor_reset(pcdev, false);
-
- return 0;
-}
-
-static void omap1_cam_clock_stop(struct soc_camera_host *ici)
-{
- struct omap1_cam_dev *pcdev = ici->priv;
- u32 ctrlclock;
-
- suspend_capture(pcdev);
- disable_capture(pcdev);
-
- sensor_reset(pcdev, true);
-
- /* disable and release system clocks */
- ctrlclock = CAM_READ_CACHE(pcdev, CTRLCLOCK);
- ctrlclock &= ~(MCLK_EN | DPLL_EN | CAMEXCLK_EN);
- CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
-
- ctrlclock = (ctrlclock & ~FOSCMOD_MASK) | FOSCMOD_12MHz;
- CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
- CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock | MCLK_EN);
-
- CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~MCLK_EN);
-
- clk_disable(pcdev->clk);
-}
-
-/* Duplicate standard formats based on host capability of byte swapping */
-static const struct soc_mbus_lookup omap1_cam_formats[] = {
-{
- .code = MEDIA_BUS_FMT_UYVY8_2X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_YUYV,
- .name = "YUYV",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_BE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_VYUY8_2X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_YVYU,
- .name = "YVYU",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_BE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_YUYV8_2X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_UYVY,
- .name = "UYVY",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_BE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_YVYU8_2X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_VYUY,
- .name = "VYUY",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_BE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_RGB555,
- .name = "RGB555",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_BE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_RGB555X,
- .name = "RGB555X",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_BE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_RGB565,
- .name = "RGB565",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_BE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_RGB565X,
- .name = "RGB565X",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_BE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-},
-};
-
-static int omap1_cam_get_formats(struct soc_camera_device *icd,
- unsigned int idx, struct soc_camera_format_xlate *xlate)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct device *dev = icd->parent;
- int formats = 0, ret;
- struct v4l2_subdev_mbus_code_enum code = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- .index = idx,
- };
- const struct soc_mbus_pixelfmt *fmt;
-
- ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code);
- if (ret < 0)
- /* No more formats */
- return 0;
-
- fmt = soc_mbus_get_fmtdesc(code.code);
- if (!fmt) {
- dev_warn(dev, "%s: unsupported format code #%d: %d\n", __func__,
- idx, code.code);
- return 0;
- }
-
- /* Check support for the requested bits-per-sample */
- if (fmt->bits_per_sample != 8)
- return 0;
-
- switch (code.code) {
- case MEDIA_BUS_FMT_YUYV8_2X8:
- case MEDIA_BUS_FMT_YVYU8_2X8:
- case MEDIA_BUS_FMT_UYVY8_2X8:
- case MEDIA_BUS_FMT_VYUY8_2X8:
- case MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE:
- case MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE:
- case MEDIA_BUS_FMT_RGB565_2X8_BE:
- case MEDIA_BUS_FMT_RGB565_2X8_LE:
- formats++;
- if (xlate) {
- xlate->host_fmt = soc_mbus_find_fmtdesc(code.code,
- omap1_cam_formats,
- ARRAY_SIZE(omap1_cam_formats));
- xlate->code = code.code;
- xlate++;
- dev_dbg(dev,
- "%s: providing format %s as byte swapped code #%d\n",
- __func__, xlate->host_fmt->name, code.code);
- }
- default:
- if (xlate)
- dev_dbg(dev,
- "%s: providing format %s in pass-through mode\n",
- __func__, fmt->name);
- }
- formats++;
- if (xlate) {
- xlate->host_fmt = fmt;
- xlate->code = code.code;
- xlate++;
- }
-
- return formats;
-}
-
-static bool is_dma_aligned(s32 bytes_per_line, unsigned int height,
- enum omap1_cam_vb_mode vb_mode)
-{
- int size = bytes_per_line * height;
-
- return IS_ALIGNED(bytes_per_line, DMA_ELEMENT_SIZE) &&
- IS_ALIGNED(size, DMA_FRAME_SIZE(vb_mode) * DMA_ELEMENT_SIZE);
-}
-
-static int dma_align(int *width, int *height,
- const struct soc_mbus_pixelfmt *fmt,
- enum omap1_cam_vb_mode vb_mode, bool enlarge)
-{
- s32 bytes_per_line = soc_mbus_bytes_per_line(*width, fmt);
-
- if (bytes_per_line < 0)
- return bytes_per_line;
-
- if (!is_dma_aligned(bytes_per_line, *height, vb_mode)) {
- unsigned int pxalign = __fls(bytes_per_line / *width);
- unsigned int salign = DMA_FRAME_SHIFT(vb_mode) +
- DMA_ELEMENT_SHIFT - pxalign;
- unsigned int incr = enlarge << salign;
-
- v4l_bound_align_image(width, 1, *width + incr, 0,
- height, 1, *height + incr, 0, salign);
- return 0;
- }
- return 1;
-}
-
-#define subdev_call_with_sense(pcdev, dev, icd, sd, op, function, args...) \
-({ \
- struct soc_camera_sense sense = { \
- .master_clock = pcdev->camexclk, \
- .pixel_clock_max = 0, \
- }; \
- int __ret; \
- \
- if (pcdev->pdata) \
- sense.pixel_clock_max = pcdev->pdata->lclk_khz_max * 1000; \
- icd->sense = &sense; \
- __ret = v4l2_subdev_call(sd, op, function, ##args); \
- icd->sense = NULL; \
- \
- if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) { \
- if (sense.pixel_clock > sense.pixel_clock_max) { \
- dev_err(dev, \
- "%s: pixel clock %lu set by the camera too high!\n", \
- __func__, sense.pixel_clock); \
- __ret = -EINVAL; \
- } \
- } \
- __ret; \
-})
-
-static int set_format(struct omap1_cam_dev *pcdev, struct device *dev,
- struct soc_camera_device *icd, struct v4l2_subdev *sd,
- struct v4l2_subdev_format *format,
- const struct soc_camera_format_xlate *xlate)
-{
- s32 bytes_per_line;
- struct v4l2_mbus_framefmt *mf = &format->format;
- int ret = subdev_call_with_sense(pcdev, dev, icd, sd, pad, set_fmt, NULL, format);
-
- if (ret < 0) {
- dev_err(dev, "%s: set_fmt failed\n", __func__);
- return ret;
- }
-
- if (mf->code != xlate->code) {
- dev_err(dev, "%s: unexpected pixel code change\n", __func__);
- return -EINVAL;
- }
-
- bytes_per_line = soc_mbus_bytes_per_line(mf->width, xlate->host_fmt);
- if (bytes_per_line < 0) {
- dev_err(dev, "%s: soc_mbus_bytes_per_line() failed\n",
- __func__);
- return bytes_per_line;
- }
-
- if (!is_dma_aligned(bytes_per_line, mf->height, pcdev->vb_mode)) {
- dev_err(dev, "%s: resulting geometry %ux%u not DMA aligned\n",
- __func__, mf->width, mf->height);
- return -EINVAL;
- }
- return 0;
-}
-
-static int omap1_cam_set_crop(struct soc_camera_device *icd,
- const struct v4l2_crop *crop)
-{
- const struct v4l2_rect *rect = &crop->c;
- const struct soc_camera_format_xlate *xlate = icd->current_fmt;
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct device *dev = icd->parent;
- struct soc_camera_host *ici = to_soc_camera_host(dev);
- struct omap1_cam_dev *pcdev = ici->priv;
- struct v4l2_subdev_format fmt = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- };
- struct v4l2_mbus_framefmt *mf = &fmt.format;
- int ret;
-
- ret = subdev_call_with_sense(pcdev, dev, icd, sd, video, s_crop, crop);
- if (ret < 0) {
- dev_warn(dev, "%s: failed to crop to %ux%u@%u:%u\n", __func__,
- rect->width, rect->height, rect->left, rect->top);
- return ret;
- }
-
- ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt);
- if (ret < 0) {
- dev_warn(dev, "%s: failed to fetch current format\n", __func__);
- return ret;
- }
-
- ret = dma_align(&mf->width, &mf->height, xlate->host_fmt, pcdev->vb_mode,
- false);
- if (ret < 0) {
- dev_err(dev, "%s: failed to align %ux%u %s with DMA\n",
- __func__, mf->width, mf->height,
- xlate->host_fmt->name);
- return ret;
- }
-
- if (!ret) {
- /* sensor returned geometry not DMA aligned, trying to fix */
- ret = set_format(pcdev, dev, icd, sd, &fmt, xlate);
- if (ret < 0) {
- dev_err(dev, "%s: failed to set format\n", __func__);
- return ret;
- }
- }
-
- icd->user_width = mf->width;
- icd->user_height = mf->height;
-
- return 0;
-}
-
-static int omap1_cam_set_fmt(struct soc_camera_device *icd,
- struct v4l2_format *f)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- const struct soc_camera_format_xlate *xlate;
- struct device *dev = icd->parent;
- struct soc_camera_host *ici = to_soc_camera_host(dev);
- struct omap1_cam_dev *pcdev = ici->priv;
- struct v4l2_pix_format *pix = &f->fmt.pix;
- struct v4l2_subdev_format format = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- };
- struct v4l2_mbus_framefmt *mf = &format.format;
- int ret;
-
- xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
- if (!xlate) {
- dev_warn(dev, "%s: format %#x not found\n", __func__,
- pix->pixelformat);
- return -EINVAL;
- }
-
- mf->width = pix->width;
- mf->height = pix->height;
- mf->field = pix->field;
- mf->colorspace = pix->colorspace;
- mf->code = xlate->code;
-
- ret = dma_align(&mf->width, &mf->height, xlate->host_fmt, pcdev->vb_mode,
- true);
- if (ret < 0) {
- dev_err(dev, "%s: failed to align %ux%u %s with DMA\n",
- __func__, pix->width, pix->height,
- xlate->host_fmt->name);
- return ret;
- }
-
- ret = set_format(pcdev, dev, icd, sd, &format, xlate);
- if (ret < 0) {
- dev_err(dev, "%s: failed to set format\n", __func__);
- return ret;
- }
-
- pix->width = mf->width;
- pix->height = mf->height;
- pix->field = mf->field;
- pix->colorspace = mf->colorspace;
- icd->current_fmt = xlate;
-
- return 0;
-}
-
-static int omap1_cam_try_fmt(struct soc_camera_device *icd,
- struct v4l2_format *f)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- const struct soc_camera_format_xlate *xlate;
- struct v4l2_pix_format *pix = &f->fmt.pix;
- struct v4l2_subdev_pad_config pad_cfg;
- struct v4l2_subdev_format format = {
- .which = V4L2_SUBDEV_FORMAT_TRY,
- };
- struct v4l2_mbus_framefmt *mf = &format.format;
- int ret;
- /* TODO: limit to mx1 hardware capabilities */
-
- xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
- if (!xlate) {
- dev_warn(icd->parent, "Format %#x not found\n",
- pix->pixelformat);
- return -EINVAL;
- }
-
- mf->width = pix->width;
- mf->height = pix->height;
- mf->field = pix->field;
- mf->colorspace = pix->colorspace;
- mf->code = xlate->code;
-
- /* limit to sensor capabilities */
- ret = v4l2_subdev_call(sd, pad, set_fmt, &pad_cfg, &format);
- if (ret < 0)
- return ret;
-
- pix->width = mf->width;
- pix->height = mf->height;
- pix->field = mf->field;
- pix->colorspace = mf->colorspace;
-
- return 0;
-}
-
-static bool sg_mode;
-
-/*
- * Local mmap_mapper wrapper,
- * used for detecting videobuf-dma-contig buffer allocation failures
- * and switching to videobuf-dma-sg automatically for future attempts.
- */
-static int omap1_cam_mmap_mapper(struct videobuf_queue *q,
- struct videobuf_buffer *buf,
- struct vm_area_struct *vma)
-{
- struct soc_camera_device *icd = q->priv_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct omap1_cam_dev *pcdev = ici->priv;
- int ret;
-
- ret = pcdev->mmap_mapper(q, buf, vma);
-
- if (ret == -ENOMEM)
- sg_mode = true;
-
- return ret;
-}
-
-static void omap1_cam_init_videobuf(struct videobuf_queue *q,
- struct soc_camera_device *icd)
-{
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct omap1_cam_dev *pcdev = ici->priv;
-
- if (!sg_mode)
- videobuf_queue_dma_contig_init(q, &omap1_videobuf_ops,
- icd->parent, &pcdev->lock,
- V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
- sizeof(struct omap1_cam_buf), icd, &ici->host_lock);
- else
- videobuf_queue_sg_init(q, &omap1_videobuf_ops,
- icd->parent, &pcdev->lock,
- V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
- sizeof(struct omap1_cam_buf), icd, &ici->host_lock);
-
- /* use videobuf mode (auto)selected with the module parameter */
- pcdev->vb_mode = sg_mode ? OMAP1_CAM_DMA_SG : OMAP1_CAM_DMA_CONTIG;
-
- /*
- * Ensure we substitute the videobuf-dma-contig version of the
- * mmap_mapper() callback with our own wrapper, used for switching
- * automatically to videobuf-dma-sg on buffer allocation failure.
- */
- if (!sg_mode && q->int_ops->mmap_mapper != omap1_cam_mmap_mapper) {
- pcdev->mmap_mapper = q->int_ops->mmap_mapper;
- q->int_ops->mmap_mapper = omap1_cam_mmap_mapper;
- }
-}
-
-static int omap1_cam_reqbufs(struct soc_camera_device *icd,
- struct v4l2_requestbuffers *p)
-{
- int i;
-
- /*
- * This is for locking debugging only. I removed spinlocks and now I
- * check whether .prepare is ever called on a linked buffer, or whether
- * a dma IRQ can occur for an in-work or unlinked buffer. Until now
- * it hadn't triggered
- */
- for (i = 0; i < p->count; i++) {
- struct omap1_cam_buf *buf = container_of(icd->vb_vidq.bufs[i],
- struct omap1_cam_buf, vb);
- buf->inwork = 0;
- INIT_LIST_HEAD(&buf->vb.queue);
- }
-
- return 0;
-}
-
-static int omap1_cam_querycap(struct soc_camera_host *ici,
- struct v4l2_capability *cap)
-{
- /* cap->name is set by the friendly caller:-> */
- strlcpy(cap->card, "OMAP1 Camera", sizeof(cap->card));
- cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
- cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
-
- return 0;
-}
-
-static int omap1_cam_set_bus_param(struct soc_camera_device *icd)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct device *dev = icd->parent;
- struct soc_camera_host *ici = to_soc_camera_host(dev);
- struct omap1_cam_dev *pcdev = ici->priv;
- u32 pixfmt = icd->current_fmt->host_fmt->fourcc;
- const struct soc_camera_format_xlate *xlate;
- const struct soc_mbus_pixelfmt *fmt;
- struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
- unsigned long common_flags;
- u32 ctrlclock, mode;
- int ret;
-
- ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
- if (!ret) {
- common_flags = soc_mbus_config_compatible(&cfg, SOCAM_BUS_FLAGS);
- if (!common_flags) {
- dev_warn(dev,
- "Flags incompatible: camera 0x%x, host 0x%x\n",
- cfg.flags, SOCAM_BUS_FLAGS);
- return -EINVAL;
- }
- } else if (ret != -ENOIOCTLCMD) {
- return ret;
- } else {
- common_flags = SOCAM_BUS_FLAGS;
- }
-
- /* Make choices, possibly based on platform configuration */
- if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
- (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
- if (!pcdev->pdata ||
- pcdev->pdata->flags & OMAP1_CAMERA_LCLK_RISING)
- common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
- else
- common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
- }
-
- cfg.flags = common_flags;
- ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
- if (ret < 0 && ret != -ENOIOCTLCMD) {
- dev_dbg(dev, "camera s_mbus_config(0x%lx) returned %d\n",
- common_flags, ret);
- return ret;
- }
-
- ctrlclock = CAM_READ_CACHE(pcdev, CTRLCLOCK);
- if (ctrlclock & LCLK_EN)
- CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~LCLK_EN);
-
- if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) {
- dev_dbg(dev, "CTRLCLOCK_REG |= POLCLK\n");
- ctrlclock |= POLCLK;
- } else {
- dev_dbg(dev, "CTRLCLOCK_REG &= ~POLCLK\n");
- ctrlclock &= ~POLCLK;
- }
- CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~LCLK_EN);
-
- if (ctrlclock & LCLK_EN)
- CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
-
- /* select bus endianness */
- xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
- fmt = xlate->host_fmt;
-
- mode = CAM_READ(pcdev, MODE) & ~(RAZ_FIFO | IRQ_MASK | DMA);
- if (fmt->order == SOC_MBUS_ORDER_LE) {
- dev_dbg(dev, "MODE_REG &= ~ORDERCAMD\n");
- CAM_WRITE(pcdev, MODE, mode & ~ORDERCAMD);
- } else {
- dev_dbg(dev, "MODE_REG |= ORDERCAMD\n");
- CAM_WRITE(pcdev, MODE, mode | ORDERCAMD);
- }
-
- return 0;
-}
-
-static unsigned int omap1_cam_poll(struct file *file, poll_table *pt)
-{
- struct soc_camera_device *icd = file->private_data;
- struct omap1_cam_buf *buf;
-
- buf = list_entry(icd->vb_vidq.stream.next, struct omap1_cam_buf,
- vb.stream);
-
- poll_wait(file, &buf->vb.done, pt);
-
- if (buf->vb.state == VIDEOBUF_DONE ||
- buf->vb.state == VIDEOBUF_ERROR)
- return POLLIN | POLLRDNORM;
-
- return 0;
-}
-
-static struct soc_camera_host_ops omap1_host_ops = {
- .owner = THIS_MODULE,
- .add = omap1_cam_add_device,
- .remove = omap1_cam_remove_device,
- .clock_start = omap1_cam_clock_start,
- .clock_stop = omap1_cam_clock_stop,
- .get_formats = omap1_cam_get_formats,
- .set_crop = omap1_cam_set_crop,
- .set_fmt = omap1_cam_set_fmt,
- .try_fmt = omap1_cam_try_fmt,
- .init_videobuf = omap1_cam_init_videobuf,
- .reqbufs = omap1_cam_reqbufs,
- .querycap = omap1_cam_querycap,
- .set_bus_param = omap1_cam_set_bus_param,
- .poll = omap1_cam_poll,
-};
-
-static int omap1_cam_probe(struct platform_device *pdev)
-{
- struct omap1_cam_dev *pcdev;
- struct resource *res;
- struct clk *clk;
- void __iomem *base;
- unsigned int irq;
- int err = 0;
-
- irq = platform_get_irq(pdev, 0);
- if ((int)irq <= 0) {
- err = -ENODEV;
- goto exit;
- }
-
- clk = devm_clk_get(&pdev->dev, "armper_ck");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
-
- pcdev = devm_kzalloc(&pdev->dev, sizeof(*pcdev) + resource_size(res),
- GFP_KERNEL);
- if (!pcdev)
- return -ENOMEM;
-
- pcdev->clk = clk;
-
- pcdev->pdata = pdev->dev.platform_data;
- if (pcdev->pdata) {
- pcdev->pflags = pcdev->pdata->flags;
- pcdev->camexclk = pcdev->pdata->camexclk_khz * 1000;
- }
-
- switch (pcdev->camexclk) {
- case 6000000:
- case 8000000:
- case 9600000:
- case 12000000:
- case 24000000:
- break;
- default:
- /* pcdev->camexclk != 0 => pcdev->pdata != NULL */
- dev_warn(&pdev->dev,
- "Incorrect sensor clock frequency %ld kHz, "
- "should be one of 0, 6, 8, 9.6, 12 or 24 MHz, "
- "please correct your platform data\n",
- pcdev->pdata->camexclk_khz);
- pcdev->camexclk = 0;
- case 0:
- dev_info(&pdev->dev, "Not providing sensor clock\n");
- }
-
- INIT_LIST_HEAD(&pcdev->capture);
- spin_lock_init(&pcdev->lock);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
-
- pcdev->irq = irq;
- pcdev->base = base;
-
- sensor_reset(pcdev, true);
-
- err = omap_request_dma(OMAP_DMA_CAMERA_IF_RX, DRIVER_NAME,
- dma_isr, (void *)pcdev, &pcdev->dma_ch);
- if (err < 0) {
- dev_err(&pdev->dev, "Can't request DMA for OMAP1 Camera\n");
- return -EBUSY;
- }
- dev_dbg(&pdev->dev, "got DMA channel %d\n", pcdev->dma_ch);
-
- /* preconfigure DMA */
- omap_set_dma_src_params(pcdev->dma_ch, OMAP_DMA_PORT_TIPB,
- OMAP_DMA_AMODE_CONSTANT, res->start + REG_CAMDATA,
- 0, 0);
- omap_set_dma_dest_burst_mode(pcdev->dma_ch, OMAP_DMA_DATA_BURST_4);
- /* setup DMA autoinitialization */
- omap_dma_link_lch(pcdev->dma_ch, pcdev->dma_ch);
-
- err = devm_request_irq(&pdev->dev, pcdev->irq, cam_isr, 0, DRIVER_NAME,
- pcdev);
- if (err) {
- dev_err(&pdev->dev, "Camera interrupt register failed\n");
- goto exit_free_dma;
- }
-
- pcdev->soc_host.drv_name = DRIVER_NAME;
- pcdev->soc_host.ops = &omap1_host_ops;
- pcdev->soc_host.priv = pcdev;
- pcdev->soc_host.v4l2_dev.dev = &pdev->dev;
- pcdev->soc_host.nr = pdev->id;
-
- err = soc_camera_host_register(&pcdev->soc_host);
- if (err)
- return err;
-
- dev_info(&pdev->dev, "OMAP1 Camera Interface driver loaded\n");
-
- return 0;
-
-exit_free_dma:
- omap_free_dma(pcdev->dma_ch);
-exit:
- return err;
-}
-
-static int omap1_cam_remove(struct platform_device *pdev)
-{
- struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
- struct omap1_cam_dev *pcdev = container_of(soc_host,
- struct omap1_cam_dev, soc_host);
-
- omap_free_dma(pcdev->dma_ch);
-
- soc_camera_host_unregister(soc_host);
-
- dev_info(&pdev->dev, "OMAP1 Camera Interface driver unloaded\n");
-
- return 0;
-}
-
-static struct platform_driver omap1_cam_driver = {
- .driver = {
- .name = DRIVER_NAME,
- },
- .probe = omap1_cam_probe,
- .remove = omap1_cam_remove,
-};
-
-module_platform_driver(omap1_cam_driver);
-
-module_param(sg_mode, bool, 0644);
-MODULE_PARM_DESC(sg_mode, "videobuf mode, 0: dma-contig (default), 1: dma-sg");
-
-MODULE_DESCRIPTION("OMAP1 Camera Interface driver");
-MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>");
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_ALIAS("platform:" DRIVER_NAME);
--
2.8.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 4/4] staging/media: remove deprecated timb driver
2016-06-02 7:18 [PATCH 0/4] Remove deprecated drivers Hans Verkuil
` (2 preceding siblings ...)
2016-06-02 7:18 ` [PATCH 3/4] staging/media: remove deprecated omap1 driver Hans Verkuil
@ 2016-06-02 7:18 ` Hans Verkuil
3 siblings, 0 replies; 5+ messages in thread
From: Hans Verkuil @ 2016-06-02 7:18 UTC (permalink / raw)
To: linux-media; +Cc: Hans Verkuil, Richard Röjfors
From: Hans Verkuil <hans.verkuil@cisco.com>
Remove this deprecated old driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Richard Röjfors <richard@puffinpack.se>
---
drivers/staging/media/Kconfig | 2 -
drivers/staging/media/Makefile | 1 -
drivers/staging/media/timb/Kconfig | 11 -
drivers/staging/media/timb/Makefile | 1 -
drivers/staging/media/timb/timblogiw.c | 870 ---------------------------------
5 files changed, 885 deletions(-)
delete mode 100644 drivers/staging/media/timb/Kconfig
delete mode 100644 drivers/staging/media/timb/Makefile
delete mode 100644 drivers/staging/media/timb/timblogiw.c
diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index c6878cd..f1db900 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -29,8 +29,6 @@ source "drivers/staging/media/mn88472/Kconfig"
source "drivers/staging/media/omap4iss/Kconfig"
-source "drivers/staging/media/timb/Kconfig"
-
source "drivers/staging/media/tw686x-kh/Kconfig"
# Keep LIRC at the end, as it has sub-menus
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
index 9c89b3e..61c3973 100644
--- a/drivers/staging/media/Makefile
+++ b/drivers/staging/media/Makefile
@@ -4,5 +4,4 @@ obj-$(CONFIG_LIRC_STAGING) += lirc/
obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/
obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/
obj-$(CONFIG_DVB_MN88472) += mn88472/
-obj-$(CONFIG_VIDEO_TIMBERDALE) += timb/
obj-$(CONFIG_VIDEO_TW686X_KH) += tw686x-kh/
diff --git a/drivers/staging/media/timb/Kconfig b/drivers/staging/media/timb/Kconfig
deleted file mode 100644
index e413fec..0000000
--- a/drivers/staging/media/timb/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-config VIDEO_TIMBERDALE
- tristate "Support for timberdale Video In/LogiWIN"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && HAS_DMA
- depends on (MFD_TIMBERDALE && TIMB_DMA) || COMPILE_TEST
- select VIDEO_ADV7180
- select VIDEOBUF_DMA_CONTIG
- ---help---
- Add support for the Video In peripherial of the timberdale FPGA.
-
- This driver is deprecated and will be removed soon unless someone
- will start the work to convert this driver to the vb2 framework.
diff --git a/drivers/staging/media/timb/Makefile b/drivers/staging/media/timb/Makefile
deleted file mode 100644
index 4c989c2..0000000
--- a/drivers/staging/media/timb/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_VIDEO_TIMBERDALE) += timblogiw.o
diff --git a/drivers/staging/media/timb/timblogiw.c b/drivers/staging/media/timb/timblogiw.c
deleted file mode 100644
index 113c9f3..0000000
--- a/drivers/staging/media/timb/timblogiw.c
+++ /dev/null
@@ -1,870 +0,0 @@
-/*
- * timblogiw.c timberdale FPGA LogiWin Video In driver
- * Copyright (c) 2009-2010 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* Supports:
- * Timberdale FPGA LogiWin Video In
- */
-
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/dmaengine.h>
-#include <linux/scatterlist.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-device.h>
-#include <media/videobuf-dma-contig.h>
-#include <linux/platform_data/media/timb_video.h>
-
-#define DRIVER_NAME "timb-video"
-
-#define TIMBLOGIWIN_NAME "Timberdale Video-In"
-#define TIMBLOGIW_VERSION_CODE 0x04
-
-#define TIMBLOGIW_LINES_PER_DESC 44
-#define TIMBLOGIW_MAX_VIDEO_MEM 16
-
-#define TIMBLOGIW_HAS_DECODER(lw) (lw->pdata.encoder.module_name)
-
-
-struct timblogiw {
- struct video_device video_dev;
- struct v4l2_device v4l2_dev; /* mutual exclusion */
- struct mutex lock;
- struct device *dev;
- struct timb_video_platform_data pdata;
- struct v4l2_subdev *sd_enc; /* encoder */
- bool opened;
-};
-
-struct timblogiw_tvnorm {
- v4l2_std_id std;
- u16 width;
- u16 height;
- u8 fps;
-};
-
-struct timblogiw_fh {
- struct videobuf_queue vb_vidq;
- struct timblogiw_tvnorm const *cur_norm;
- struct list_head capture;
- struct dma_chan *chan;
- spinlock_t queue_lock; /* mutual exclusion */
- unsigned int frame_count;
-};
-
-struct timblogiw_buffer {
- /* common v4l buffer stuff -- must be first */
- struct videobuf_buffer vb;
- struct scatterlist sg[16];
- dma_cookie_t cookie;
- struct timblogiw_fh *fh;
-};
-
-static const struct timblogiw_tvnorm timblogiw_tvnorms[] = {
- {
- .std = V4L2_STD_PAL,
- .width = 720,
- .height = 576,
- .fps = 25
- },
- {
- .std = V4L2_STD_NTSC,
- .width = 720,
- .height = 480,
- .fps = 30
- }
-};
-
-static int timblogiw_bytes_per_line(const struct timblogiw_tvnorm *norm)
-{
- return norm->width * 2;
-}
-
-
-static int timblogiw_frame_size(const struct timblogiw_tvnorm *norm)
-{
- return norm->height * timblogiw_bytes_per_line(norm);
-}
-
-static const struct timblogiw_tvnorm *timblogiw_get_norm(const v4l2_std_id std)
-{
- int i;
- for (i = 0; i < ARRAY_SIZE(timblogiw_tvnorms); i++)
- if (timblogiw_tvnorms[i].std & std)
- return timblogiw_tvnorms + i;
-
- /* default to first element */
- return timblogiw_tvnorms;
-}
-
-static void timblogiw_dma_cb(void *data)
-{
- struct timblogiw_buffer *buf = data;
- struct timblogiw_fh *fh = buf->fh;
- struct videobuf_buffer *vb = &buf->vb;
-
- spin_lock(&fh->queue_lock);
-
- /* mark the transfer done */
- buf->cookie = -1;
-
- fh->frame_count++;
-
- if (vb->state != VIDEOBUF_ERROR) {
- list_del(&vb->queue);
- v4l2_get_timestamp(&vb->ts);
- vb->field_count = fh->frame_count * 2;
- vb->state = VIDEOBUF_DONE;
-
- wake_up(&vb->done);
- }
-
- if (!list_empty(&fh->capture)) {
- vb = list_entry(fh->capture.next, struct videobuf_buffer,
- queue);
- vb->state = VIDEOBUF_ACTIVE;
- }
-
- spin_unlock(&fh->queue_lock);
-}
-
-static bool timblogiw_dma_filter_fn(struct dma_chan *chan, void *filter_param)
-{
- return chan->chan_id == (uintptr_t)filter_param;
-}
-
-/* IOCTL functions */
-
-static int timblogiw_g_fmt(struct file *file, void *priv,
- struct v4l2_format *format)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw *lw = video_get_drvdata(vdev);
- struct timblogiw_fh *fh = priv;
-
- dev_dbg(&vdev->dev, "%s entry\n", __func__);
-
- if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- mutex_lock(&lw->lock);
-
- format->fmt.pix.width = fh->cur_norm->width;
- format->fmt.pix.height = fh->cur_norm->height;
- format->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY;
- format->fmt.pix.bytesperline = timblogiw_bytes_per_line(fh->cur_norm);
- format->fmt.pix.sizeimage = timblogiw_frame_size(fh->cur_norm);
- format->fmt.pix.field = V4L2_FIELD_NONE;
-
- mutex_unlock(&lw->lock);
-
- return 0;
-}
-
-static int timblogiw_try_fmt(struct file *file, void *priv,
- struct v4l2_format *format)
-{
- struct video_device *vdev = video_devdata(file);
- struct v4l2_pix_format *pix = &format->fmt.pix;
-
- dev_dbg(&vdev->dev,
- "%s - width=%d, height=%d, pixelformat=%d, field=%d\n"
- "bytes per line %d, size image: %d, colorspace: %d\n",
- __func__,
- pix->width, pix->height, pix->pixelformat, pix->field,
- pix->bytesperline, pix->sizeimage, pix->colorspace);
-
- if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- if (pix->field != V4L2_FIELD_NONE)
- return -EINVAL;
-
- if (pix->pixelformat != V4L2_PIX_FMT_UYVY)
- return -EINVAL;
-
- return 0;
-}
-
-static int timblogiw_s_fmt(struct file *file, void *priv,
- struct v4l2_format *format)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw *lw = video_get_drvdata(vdev);
- struct timblogiw_fh *fh = priv;
- struct v4l2_pix_format *pix = &format->fmt.pix;
- int err;
-
- mutex_lock(&lw->lock);
-
- err = timblogiw_try_fmt(file, priv, format);
- if (err)
- goto out;
-
- if (videobuf_queue_is_busy(&fh->vb_vidq)) {
- dev_err(&vdev->dev, "%s queue busy\n", __func__);
- err = -EBUSY;
- goto out;
- }
-
- pix->width = fh->cur_norm->width;
- pix->height = fh->cur_norm->height;
-
-out:
- mutex_unlock(&lw->lock);
- return err;
-}
-
-static int timblogiw_querycap(struct file *file, void *priv,
- struct v4l2_capability *cap)
-{
- struct video_device *vdev = video_devdata(file);
-
- dev_dbg(&vdev->dev, "%s: Entry\n", __func__);
- strncpy(cap->card, TIMBLOGIWIN_NAME, sizeof(cap->card)-1);
- strncpy(cap->driver, DRIVER_NAME, sizeof(cap->driver) - 1);
- snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", vdev->name);
- cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
- V4L2_CAP_READWRITE;
- cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
-
- return 0;
-}
-
-static int timblogiw_enum_fmt(struct file *file, void *priv,
- struct v4l2_fmtdesc *fmt)
-{
- struct video_device *vdev = video_devdata(file);
-
- dev_dbg(&vdev->dev, "%s, index: %d\n", __func__, fmt->index);
-
- if (fmt->index != 0)
- return -EINVAL;
- memset(fmt, 0, sizeof(*fmt));
- fmt->index = 0;
- fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- strncpy(fmt->description, "4:2:2, packed, YUYV",
- sizeof(fmt->description)-1);
- fmt->pixelformat = V4L2_PIX_FMT_UYVY;
-
- return 0;
-}
-
-static int timblogiw_g_parm(struct file *file, void *priv,
- struct v4l2_streamparm *sp)
-{
- struct timblogiw_fh *fh = priv;
- struct v4l2_captureparm *cp = &sp->parm.capture;
-
- cp->capability = V4L2_CAP_TIMEPERFRAME;
- cp->timeperframe.numerator = 1;
- cp->timeperframe.denominator = fh->cur_norm->fps;
-
- return 0;
-}
-
-static int timblogiw_reqbufs(struct file *file, void *priv,
- struct v4l2_requestbuffers *rb)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw_fh *fh = priv;
-
- dev_dbg(&vdev->dev, "%s: entry\n", __func__);
-
- return videobuf_reqbufs(&fh->vb_vidq, rb);
-}
-
-static int timblogiw_querybuf(struct file *file, void *priv,
- struct v4l2_buffer *b)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw_fh *fh = priv;
-
- dev_dbg(&vdev->dev, "%s: entry\n", __func__);
-
- return videobuf_querybuf(&fh->vb_vidq, b);
-}
-
-static int timblogiw_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw_fh *fh = priv;
-
- dev_dbg(&vdev->dev, "%s: entry\n", __func__);
-
- return videobuf_qbuf(&fh->vb_vidq, b);
-}
-
-static int timblogiw_dqbuf(struct file *file, void *priv,
- struct v4l2_buffer *b)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw_fh *fh = priv;
-
- dev_dbg(&vdev->dev, "%s: entry\n", __func__);
-
- return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
-}
-
-static int timblogiw_g_std(struct file *file, void *priv, v4l2_std_id *std)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw_fh *fh = priv;
-
- dev_dbg(&vdev->dev, "%s: entry\n", __func__);
-
- *std = fh->cur_norm->std;
- return 0;
-}
-
-static int timblogiw_s_std(struct file *file, void *priv, v4l2_std_id std)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw *lw = video_get_drvdata(vdev);
- struct timblogiw_fh *fh = priv;
- int err = 0;
-
- dev_dbg(&vdev->dev, "%s: entry\n", __func__);
-
- mutex_lock(&lw->lock);
-
- if (TIMBLOGIW_HAS_DECODER(lw))
- err = v4l2_subdev_call(lw->sd_enc, video, s_std, std);
-
- if (!err)
- fh->cur_norm = timblogiw_get_norm(std);
-
- mutex_unlock(&lw->lock);
-
- return err;
-}
-
-static int timblogiw_enuminput(struct file *file, void *priv,
- struct v4l2_input *inp)
-{
- struct video_device *vdev = video_devdata(file);
- int i;
-
- dev_dbg(&vdev->dev, "%s: Entry\n", __func__);
-
- if (inp->index != 0)
- return -EINVAL;
-
- inp->index = 0;
-
- strncpy(inp->name, "Timb input 1", sizeof(inp->name) - 1);
- inp->type = V4L2_INPUT_TYPE_CAMERA;
-
- inp->std = 0;
- for (i = 0; i < ARRAY_SIZE(timblogiw_tvnorms); i++)
- inp->std |= timblogiw_tvnorms[i].std;
-
- return 0;
-}
-
-static int timblogiw_g_input(struct file *file, void *priv,
- unsigned int *input)
-{
- struct video_device *vdev = video_devdata(file);
-
- dev_dbg(&vdev->dev, "%s: Entry\n", __func__);
-
- *input = 0;
-
- return 0;
-}
-
-static int timblogiw_s_input(struct file *file, void *priv, unsigned int input)
-{
- struct video_device *vdev = video_devdata(file);
-
- dev_dbg(&vdev->dev, "%s: Entry\n", __func__);
-
- if (input != 0)
- return -EINVAL;
- return 0;
-}
-
-static int timblogiw_streamon(struct file *file, void *priv, enum v4l2_buf_type type)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw_fh *fh = priv;
-
- dev_dbg(&vdev->dev, "%s: entry\n", __func__);
-
- if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
- dev_dbg(&vdev->dev, "%s - No capture device\n", __func__);
- return -EINVAL;
- }
-
- fh->frame_count = 0;
- return videobuf_streamon(&fh->vb_vidq);
-}
-
-static int timblogiw_streamoff(struct file *file, void *priv,
- enum v4l2_buf_type type)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw_fh *fh = priv;
-
- dev_dbg(&vdev->dev, "%s entry\n", __func__);
-
- if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- return videobuf_streamoff(&fh->vb_vidq);
-}
-
-static int timblogiw_querystd(struct file *file, void *priv, v4l2_std_id *std)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw *lw = video_get_drvdata(vdev);
- struct timblogiw_fh *fh = priv;
-
- dev_dbg(&vdev->dev, "%s entry\n", __func__);
-
- if (TIMBLOGIW_HAS_DECODER(lw))
- return v4l2_subdev_call(lw->sd_enc, video, querystd, std);
- else {
- *std = fh->cur_norm->std;
- return 0;
- }
-}
-
-static int timblogiw_enum_framesizes(struct file *file, void *priv,
- struct v4l2_frmsizeenum *fsize)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw_fh *fh = priv;
-
- dev_dbg(&vdev->dev, "%s - index: %d, format: %d\n", __func__,
- fsize->index, fsize->pixel_format);
-
- if ((fsize->index != 0) ||
- (fsize->pixel_format != V4L2_PIX_FMT_UYVY))
- return -EINVAL;
-
- fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
- fsize->discrete.width = fh->cur_norm->width;
- fsize->discrete.height = fh->cur_norm->height;
-
- return 0;
-}
-
-/* Video buffer functions */
-
-static int buffer_setup(struct videobuf_queue *vq, unsigned int *count,
- unsigned int *size)
-{
- struct timblogiw_fh *fh = vq->priv_data;
-
- *size = timblogiw_frame_size(fh->cur_norm);
-
- if (!*count)
- *count = 32;
-
- while (*size * *count > TIMBLOGIW_MAX_VIDEO_MEM * 1024 * 1024)
- (*count)--;
-
- return 0;
-}
-
-static int buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
- enum v4l2_field field)
-{
- struct timblogiw_fh *fh = vq->priv_data;
- struct timblogiw_buffer *buf = container_of(vb, struct timblogiw_buffer,
- vb);
- unsigned int data_size = timblogiw_frame_size(fh->cur_norm);
- int err = 0;
-
- if (vb->baddr && vb->bsize < data_size)
- /* User provided buffer, but it is too small */
- return -ENOMEM;
-
- vb->size = data_size;
- vb->width = fh->cur_norm->width;
- vb->height = fh->cur_norm->height;
- vb->field = field;
-
- if (vb->state == VIDEOBUF_NEEDS_INIT) {
- int i;
- unsigned int size;
- unsigned int bytes_per_desc = TIMBLOGIW_LINES_PER_DESC *
- timblogiw_bytes_per_line(fh->cur_norm);
- dma_addr_t addr;
-
- sg_init_table(buf->sg, ARRAY_SIZE(buf->sg));
-
- err = videobuf_iolock(vq, vb, NULL);
- if (err)
- goto err;
-
- addr = videobuf_to_dma_contig(vb);
- for (i = 0, size = 0; size < data_size; i++) {
- sg_dma_address(buf->sg + i) = addr + size;
- size += bytes_per_desc;
- sg_dma_len(buf->sg + i) = (size > data_size) ?
- (bytes_per_desc - (size - data_size)) :
- bytes_per_desc;
- }
-
- vb->state = VIDEOBUF_PREPARED;
- buf->cookie = -1;
- buf->fh = fh;
- }
-
- return 0;
-
-err:
- videobuf_dma_contig_free(vq, vb);
- vb->state = VIDEOBUF_NEEDS_INIT;
- return err;
-}
-
-static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
-{
- struct timblogiw_fh *fh = vq->priv_data;
- struct timblogiw_buffer *buf = container_of(vb, struct timblogiw_buffer,
- vb);
- struct dma_async_tx_descriptor *desc;
- int sg_elems;
- int bytes_per_desc = TIMBLOGIW_LINES_PER_DESC *
- timblogiw_bytes_per_line(fh->cur_norm);
-
- sg_elems = timblogiw_frame_size(fh->cur_norm) / bytes_per_desc;
- sg_elems +=
- (timblogiw_frame_size(fh->cur_norm) % bytes_per_desc) ? 1 : 0;
-
- if (list_empty(&fh->capture))
- vb->state = VIDEOBUF_ACTIVE;
- else
- vb->state = VIDEOBUF_QUEUED;
-
- list_add_tail(&vb->queue, &fh->capture);
-
- spin_unlock_irq(&fh->queue_lock);
-
- desc = dmaengine_prep_slave_sg(fh->chan,
- buf->sg, sg_elems, DMA_DEV_TO_MEM,
- DMA_PREP_INTERRUPT);
- if (!desc) {
- spin_lock_irq(&fh->queue_lock);
- list_del_init(&vb->queue);
- vb->state = VIDEOBUF_PREPARED;
- return;
- }
-
- desc->callback_param = buf;
- desc->callback = timblogiw_dma_cb;
-
- buf->cookie = desc->tx_submit(desc);
-
- spin_lock_irq(&fh->queue_lock);
-}
-
-static void buffer_release(struct videobuf_queue *vq,
- struct videobuf_buffer *vb)
-{
- struct timblogiw_fh *fh = vq->priv_data;
- struct timblogiw_buffer *buf = container_of(vb, struct timblogiw_buffer,
- vb);
-
- videobuf_waiton(vq, vb, 0, 0);
- if (buf->cookie >= 0)
- dma_sync_wait(fh->chan, buf->cookie);
-
- videobuf_dma_contig_free(vq, vb);
- vb->state = VIDEOBUF_NEEDS_INIT;
-}
-
-static struct videobuf_queue_ops timblogiw_video_qops = {
- .buf_setup = buffer_setup,
- .buf_prepare = buffer_prepare,
- .buf_queue = buffer_queue,
- .buf_release = buffer_release,
-};
-
-/* Device Operations functions */
-
-static int timblogiw_open(struct file *file)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw *lw = video_get_drvdata(vdev);
- struct timblogiw_fh *fh;
- v4l2_std_id std;
- dma_cap_mask_t mask;
- int err = 0;
-
- dev_dbg(&vdev->dev, "%s: entry\n", __func__);
-
- mutex_lock(&lw->lock);
- if (lw->opened) {
- err = -EBUSY;
- goto out;
- }
-
- if (TIMBLOGIW_HAS_DECODER(lw) && !lw->sd_enc) {
- struct i2c_adapter *adapt;
-
- /* find the video decoder */
- adapt = i2c_get_adapter(lw->pdata.i2c_adapter);
- if (!adapt) {
- dev_err(&vdev->dev, "No I2C bus #%d\n",
- lw->pdata.i2c_adapter);
- err = -ENODEV;
- goto out;
- }
-
- /* now find the encoder */
- lw->sd_enc = v4l2_i2c_new_subdev_board(&lw->v4l2_dev, adapt,
- lw->pdata.encoder.info, NULL);
-
- i2c_put_adapter(adapt);
-
- if (!lw->sd_enc) {
- dev_err(&vdev->dev, "Failed to get encoder: %s\n",
- lw->pdata.encoder.module_name);
- err = -ENODEV;
- goto out;
- }
- }
-
- fh = kzalloc(sizeof(*fh), GFP_KERNEL);
- if (!fh) {
- err = -ENOMEM;
- goto out;
- }
-
- fh->cur_norm = timblogiw_tvnorms;
- timblogiw_querystd(file, fh, &std);
- fh->cur_norm = timblogiw_get_norm(std);
-
- INIT_LIST_HEAD(&fh->capture);
- spin_lock_init(&fh->queue_lock);
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_cap_set(DMA_PRIVATE, mask);
-
- /* find the DMA channel */
- fh->chan = dma_request_channel(mask, timblogiw_dma_filter_fn,
- (void *)(uintptr_t)lw->pdata.dma_channel);
- if (!fh->chan) {
- dev_err(&vdev->dev, "Failed to get DMA channel\n");
- kfree(fh);
- err = -ENODEV;
- goto out;
- }
-
- file->private_data = fh;
- videobuf_queue_dma_contig_init(&fh->vb_vidq,
- &timblogiw_video_qops, lw->dev, &fh->queue_lock,
- V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
- sizeof(struct timblogiw_buffer), fh, NULL);
-
- lw->opened = true;
-out:
- mutex_unlock(&lw->lock);
-
- return err;
-}
-
-static int timblogiw_close(struct file *file)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw *lw = video_get_drvdata(vdev);
- struct timblogiw_fh *fh = file->private_data;
-
- dev_dbg(&vdev->dev, "%s: Entry\n", __func__);
-
- videobuf_stop(&fh->vb_vidq);
- videobuf_mmap_free(&fh->vb_vidq);
-
- dma_release_channel(fh->chan);
-
- kfree(fh);
-
- mutex_lock(&lw->lock);
- lw->opened = false;
- mutex_unlock(&lw->lock);
- return 0;
-}
-
-static ssize_t timblogiw_read(struct file *file, char __user *data,
- size_t count, loff_t *ppos)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw_fh *fh = file->private_data;
-
- dev_dbg(&vdev->dev, "%s: entry\n", __func__);
-
- return videobuf_read_stream(&fh->vb_vidq, data, count, ppos, 0,
- file->f_flags & O_NONBLOCK);
-}
-
-static unsigned int timblogiw_poll(struct file *file,
- struct poll_table_struct *wait)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw_fh *fh = file->private_data;
-
- dev_dbg(&vdev->dev, "%s: entry\n", __func__);
-
- return videobuf_poll_stream(file, &fh->vb_vidq, wait);
-}
-
-static int timblogiw_mmap(struct file *file, struct vm_area_struct *vma)
-{
- struct video_device *vdev = video_devdata(file);
- struct timblogiw_fh *fh = file->private_data;
-
- dev_dbg(&vdev->dev, "%s: entry\n", __func__);
-
- return videobuf_mmap_mapper(&fh->vb_vidq, vma);
-}
-
-/* Platform device functions */
-
-static struct v4l2_ioctl_ops timblogiw_ioctl_ops = {
- .vidioc_querycap = timblogiw_querycap,
- .vidioc_enum_fmt_vid_cap = timblogiw_enum_fmt,
- .vidioc_g_fmt_vid_cap = timblogiw_g_fmt,
- .vidioc_try_fmt_vid_cap = timblogiw_try_fmt,
- .vidioc_s_fmt_vid_cap = timblogiw_s_fmt,
- .vidioc_g_parm = timblogiw_g_parm,
- .vidioc_reqbufs = timblogiw_reqbufs,
- .vidioc_querybuf = timblogiw_querybuf,
- .vidioc_qbuf = timblogiw_qbuf,
- .vidioc_dqbuf = timblogiw_dqbuf,
- .vidioc_g_std = timblogiw_g_std,
- .vidioc_s_std = timblogiw_s_std,
- .vidioc_enum_input = timblogiw_enuminput,
- .vidioc_g_input = timblogiw_g_input,
- .vidioc_s_input = timblogiw_s_input,
- .vidioc_streamon = timblogiw_streamon,
- .vidioc_streamoff = timblogiw_streamoff,
- .vidioc_querystd = timblogiw_querystd,
- .vidioc_enum_framesizes = timblogiw_enum_framesizes,
-};
-
-static struct v4l2_file_operations timblogiw_fops = {
- .owner = THIS_MODULE,
- .open = timblogiw_open,
- .release = timblogiw_close,
- .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */
- .mmap = timblogiw_mmap,
- .read = timblogiw_read,
- .poll = timblogiw_poll,
-};
-
-static struct video_device timblogiw_template = {
- .name = TIMBLOGIWIN_NAME,
- .fops = &timblogiw_fops,
- .ioctl_ops = &timblogiw_ioctl_ops,
- .release = video_device_release_empty,
- .minor = -1,
- .tvnorms = V4L2_STD_PAL | V4L2_STD_NTSC
-};
-
-static int timblogiw_probe(struct platform_device *pdev)
-{
- int err;
- struct timblogiw *lw = NULL;
- struct timb_video_platform_data *pdata = pdev->dev.platform_data;
-
- if (!pdata) {
- dev_err(&pdev->dev, "No platform data\n");
- err = -EINVAL;
- goto err;
- }
-
- if (!pdata->encoder.module_name)
- dev_info(&pdev->dev, "Running without decoder\n");
-
- lw = devm_kzalloc(&pdev->dev, sizeof(*lw), GFP_KERNEL);
- if (!lw) {
- err = -ENOMEM;
- goto err;
- }
-
- if (pdev->dev.parent)
- lw->dev = pdev->dev.parent;
- else
- lw->dev = &pdev->dev;
-
- memcpy(&lw->pdata, pdata, sizeof(lw->pdata));
-
- mutex_init(&lw->lock);
-
- lw->video_dev = timblogiw_template;
-
- strlcpy(lw->v4l2_dev.name, DRIVER_NAME, sizeof(lw->v4l2_dev.name));
- err = v4l2_device_register(NULL, &lw->v4l2_dev);
- if (err)
- goto err;
-
- lw->video_dev.v4l2_dev = &lw->v4l2_dev;
-
- platform_set_drvdata(pdev, lw);
- video_set_drvdata(&lw->video_dev, lw);
-
- err = video_register_device(&lw->video_dev, VFL_TYPE_GRABBER, 0);
- if (err) {
- dev_err(&pdev->dev, "Error reg video: %d\n", err);
- goto err_request;
- }
-
- return 0;
-
-err_request:
- v4l2_device_unregister(&lw->v4l2_dev);
-err:
- dev_err(&pdev->dev, "Failed to register: %d\n", err);
-
- return err;
-}
-
-static int timblogiw_remove(struct platform_device *pdev)
-{
- struct timblogiw *lw = platform_get_drvdata(pdev);
-
- video_unregister_device(&lw->video_dev);
-
- v4l2_device_unregister(&lw->v4l2_dev);
-
- return 0;
-}
-
-static struct platform_driver timblogiw_platform_driver = {
- .driver = {
- .name = DRIVER_NAME,
- },
- .probe = timblogiw_probe,
- .remove = timblogiw_remove,
-};
-
-module_platform_driver(timblogiw_platform_driver);
-
-MODULE_DESCRIPTION(TIMBLOGIWIN_NAME);
-MODULE_AUTHOR("Pelagicore AB <info@pelagicore.com>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:"DRIVER_NAME);
--
2.8.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-06-02 7:19 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-06-02 7:18 [PATCH 0/4] Remove deprecated drivers Hans Verkuil
2016-06-02 7:18 ` [PATCH 1/4] staging/media: remove deprecated mx2 driver Hans Verkuil
2016-06-02 7:18 ` [PATCH 2/4] staging/media: remove deprecated mx3 driver Hans Verkuil
2016-06-02 7:18 ` [PATCH 3/4] staging/media: remove deprecated omap1 driver Hans Verkuil
2016-06-02 7:18 ` [PATCH 4/4] staging/media: remove deprecated timb driver Hans Verkuil
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).