[PATCH V2 25/29] staging: mmal-vchiq: Avoid use of bool in structures

[PATCH V2 25/29] staging: mmal-vchiq: Avoid use of bool in structures

[Stefan Wahren]

From: Dave Stevenson <dave.stevenson@raspberrypi.org>

Fixes up a checkpatch error "Avoid using bool structure members
because of possible alignment issues".

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c | 12 ++++++------
 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h |  4 ++--
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c
index d0f7b67..1c180ea 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c
@@ -853,9 +853,9 @@ static int port_info_get(struct vchiq_mmal_instance *instance,
 		goto release_msg;

 	if (rmsg->u.port_info_get_reply.port.is_enabled == 0)
-		port->enabled = false;
+		port->enabled = 0;
 	else
-		port->enabled = true;
+		port->enabled = 1;

 	/* copy the values out of the message */
 	port->handle = rmsg->u.port_info_get_reply.port_handle;
@@ -1292,7 +1292,7 @@ static int port_disable(struct vchiq_mmal_instance *instance,
 	if (!port->enabled)
 		return 0;

-	port->enabled = false;
+	port->enabled = 0;

 	ret = port_action_port(instance, port,
 			       MMAL_MSG_PORT_ACTION_TYPE_DISABLE);
@@ -1344,7 +1344,7 @@ static int port_enable(struct vchiq_mmal_instance *instance,
 	if (ret)
 		goto done;

-	port->enabled = true;
+	port->enabled = 1;

 	if (port->buffer_cb) {
 		/* send buffer headers to videocore */
@@ -1511,7 +1511,7 @@ int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance,
 			pr_err("failed disconnecting src port\n");
 			goto release_unlock;
 		}
-		src->connected->enabled = false;
+		src->connected->enabled = 0;
 		src->connected = NULL;
 	}

@@ -1758,7 +1758,7 @@ int vchiq_mmal_component_disable(struct vchiq_mmal_instance *instance,

 	ret = disable_component(instance, component);
 	if (ret == 0)
-		component->enabled = false;
+		component->enabled = 0;

 	mutex_unlock(&instance->vchiq_mutex);

diff --git a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h
index 1750ff0..f738e7f 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h
+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h
@@ -48,7 +48,7 @@ typedef void (*vchiq_mmal_buffer_cb)(
 		unsigned long length, u32 mmal_flags, s64 dts, s64 pts);

 struct vchiq_mmal_port {
-	bool enabled;
+	u32 enabled:1;
 	u32 handle;
 	u32 type; /* port type, cached to use on port info set */
 	u32 index; /* port index, cached to use on port info set */
@@ -82,7 +82,7 @@ struct vchiq_mmal_port {
 };

 struct vchiq_mmal_component {
-	bool enabled;
+	u32 enabled:1;
 	u32 handle;  /* VideoCore handle for component */
 	u32 inputs;  /* Number of input ports */
 	u32 outputs; /* Number of output ports */
--
2.7.4

[PATCH V2 26/29] staging: bcm2835-camera: Fix stride on RGB3/BGR3 formats

[Stefan Wahren]

From: Dave Stevenson <dave.stevenson@raspberrypi.org>

RGB3/BGR3 end up being 3 bytes per pixel, which meant that
the alignment code ended up trying to align using bitmasking
with a mask of 96.
That doesn't work, so switch to an arithmetic alignment for
those formats.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../vc04_services/bcm2835-camera/bcm2835-camera.c  | 26 +++++++++++++++++-----
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
index 1aaae57..1ad65dd 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
@@ -960,13 +960,27 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 			      1, 0);
 	f->fmt.pix.bytesperline = f->fmt.pix.width * mfmt->ybbp;
 	if (!mfmt->remove_padding) {
-		int align_mask = ((32 * mfmt->depth) >> 3) - 1;
-		/* GPU isn't removing padding, so stride is aligned to 32 */
-		f->fmt.pix.bytesperline =
-			(f->fmt.pix.bytesperline + align_mask) & ~align_mask;
+		if (mfmt->depth == 24) {
+			/*
+			 * 24bpp is a pain as we can't use simple masking.
+			 * Min stride is width aligned to 16, times 24bpp.
+			 */
+			f->fmt.pix.bytesperline =
+				((f->fmt.pix.width + 15) & ~15) * 3;
+		} else {
+			/*
+			 * GPU isn't removing padding, so stride is aligned to
+			 * 32
+			 */
+			int align_mask = ((32 * mfmt->depth) >> 3) - 1;
+
+			f->fmt.pix.bytesperline =
+				(f->fmt.pix.bytesperline + align_mask) &
+							~align_mask;
+		}
 		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
-			 "Not removing padding, so bytes/line = %d, (align_mask %d)\n",
-			 f->fmt.pix.bytesperline, align_mask);
+			 "Not removing padding, so bytes/line = %d\n",
+			 f->fmt.pix.bytesperline);
 	}

 	/* Image buffer has to be padded to allow for alignment, even though
--
2.7.4

[PATCH V2 27/29] staging: bcm2835-camera: Add sanity checks for queue_setup/CREATE_BUFS

[Stefan Wahren]

From: Dave Stevenson <dave.stevenson@raspberrypi.org>

Fixes a v4l2-compliance failure when passed a buffer that is
too small.
queue_setup wasn't handling the case where *nplanes != 0, as
used from CREATE_BUFS and requiring the driver to sanity
check the provided buffer parameters. It was assuming that
it was always being used in the REQBUFS case where it provides
the buffer properties.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../vc04_services/bcm2835-camera/bcm2835-camera.c        | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
index 1ad65dd..9c90d9b 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
@@ -236,6 +236,22 @@ static int queue_setup(struct vb2_queue *vq,
 		return -EINVAL;
 	}

+	/* Handle CREATE_BUFS situation - *nplanes != 0 */
+	if (*nplanes) {
+		if (*nplanes != 1 ||
+		    sizes[0] < dev->capture.port->current_buffer.size) {
+			v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+				 "%s: dev:%p Invalid buffer request from CREATE_BUFS, size %u < %u, nplanes %u != 1\n",
+				 __func__, dev, sizes[0],
+				 dev->capture.port->current_buffer.size,
+				 *nplanes);
+			return -EINVAL;
+		} else {
+			return 0;
+		}
+	}
+
+	/* Handle REQBUFS situation */
 	size = dev->capture.port->current_buffer.size;
 	if (size == 0) {
 		v4l2_err(&dev->v4l2_dev,
--
2.7.4

[PATCH V2 28/29] staging: bcm2835-camera: Set the field value within each buffer

[Stefan Wahren]

From: Dave Stevenson <dave.stevenson@raspberrypi.org>

Fixes a v4l2-compliance failure
v4l2-test-buffers.cpp(415): g_field() == V4L2_FIELD_ANY

The driver only ever produces progresive frames, so field should
always be set to V4L2_FIELD_NONE.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
index 9c90d9b..ea54cc2 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
@@ -405,6 +405,7 @@ static void buffer_cb(struct vchiq_mmal_instance *instance,
 		buf->vb.vb2_buf.timestamp = ktime_get_ns();
 	}
 	buf->vb.sequence = dev->capture.sequence++;
+	buf->vb.field = V4L2_FIELD_NONE;

 	vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length);
 	if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME)
--
2.7.4

[PATCH V2 29/29] staging: bcm2835-camera: Correct ctrl min/max/step/def to 64bit

[Stefan Wahren]

From: Dave Stevenson <dave.stevenson@raspberrypi.org>

The V4L2 control API was expanded to take 64 bit values in commit
0ba2aeb6dab (Apr 16 2014), but as this driver wasn't in the mainline
kernel at that point this was overlooked.

Update to use 64 bit values. This also fixes a couple of warnings
in 64 bit builds.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 drivers/staging/vc04_services/bcm2835-camera/controls.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-camera/controls.c b/drivers/staging/vc04_services/bcm2835-camera/controls.c
index 848b14a..89786c2 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c
@@ -78,10 +78,10 @@ struct bm2835_mmal_v4l2_ctrl {
 	/* control minimum value or
 	 * mask for MMAL_CONTROL_TYPE_STD_MENU
 	 */
-	s32 min;
-	s32 max; /* maximum value of control */
-	s32 def;  /* default value of control */
-	s32 step; /* step size of the control */
+	s64 min;
+	s64 max; /* maximum value of control */
+	s64 def;  /* default value of control */
+	u64 step; /* step size of the control */
 	const s64 *imenu; /* integer menu array */
 	u32 mmal_id; /* mmal parameter id */
 	bm2835_mmal_v4l2_ctrl_cb *setter;
@@ -1250,7 +1250,7 @@ int bm2835_mmal_init_controls(struct bm2835_mmal_dev *dev,

 		case MMAL_CONTROL_TYPE_STD_MENU:
 		{
-			int mask = ctrl->min;
+			u64 mask = ctrl->min;

 			if (ctrl->id == V4L2_CID_SCENE_MODE) {
 				/* Special handling to work out the mask
@@ -1260,11 +1260,11 @@ int bm2835_mmal_init_controls(struct bm2835_mmal_dev *dev,
 				 */
 				int i;

-				mask = 1 << V4L2_SCENE_MODE_NONE;
+				mask = BIT(V4L2_SCENE_MODE_NONE);
 				for (i = 0;
 				     i < ARRAY_SIZE(scene_configs);
 				     i++) {
-					mask |= 1 << scene_configs[i].v4l2_scene;
+					mask |= BIT(scene_configs[i].v4l2_scene);
 				}
 				mask = ~mask;
 			}
--
2.7.4