From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Luca Weiss <luca@z3ntu.xyz>, linux-arm-msm@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org,
Loic Poulain <loic.poulain@linaro.org>,
Robert Foss <robert.foss@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Todor Tomov <todor.too@gmail.com>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
matti.lehtimaki@gmail.com
Subject: Re: [RFC PATCH 01/14] media: dt-bindings: media: camss: Add qcom,msm8974-camss binding
Date: Mon, 23 May 2022 12:07:10 +0200 [thread overview]
Message-ID: <170dd20b-ab0b-0f61-bfe9-cb9167a2e133@linaro.org> (raw)
In-Reply-To: <20220522162802.208275-2-luca@z3ntu.xyz>
On 22/05/2022 18:27, Luca Weiss wrote:
> From: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Thank you for your patch. There is something to discuss/improve.
>
> Add bindings for qcom,msm8974-camss in order to support the camera
> subsystem on MSM8974.
>
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> .../bindings/media/qcom,msm8974-camss.yaml | 321 ++++++++++++++++++
> 1 file changed, 321 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/qcom,msm8974-camss.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8974-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8974-camss.yaml
> new file mode 100644
> index 000000000000..f8f71e477535
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,msm8974-camss.yaml
> @@ -0,0 +1,321 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/media/qcom,msm8974-camss.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm CAMSS ISP
> +
> +maintainers:
> + - Robert Foss <robert.foss@linaro.org>
> +
> +description: |
> + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> +
> +properties:
> + compatible:
> + const: qcom,msm8974-camss
> +
> + clocks:
> + minItems: 31
No need for minItems, they are equal to max by default.
> + maxItems: 31
> +
> + clock-names:
> + items:
> + - const: top_ahb
> + - const: ispif_ahb
> + - const: csiphy0_timer
> + - const: csiphy1_timer
> + - const: csiphy2_timer
> + - const: csi0_ahb
> + - const: csi0
> + - const: csi0_phy
> + - const: csi0_pix
> + - const: csi0_rdi
> + - const: csi1_ahb
> + - const: csi1
> + - const: csi1_phy
> + - const: csi1_pix
> + - const: csi1_rdi
> + - const: csi2_ahb
> + - const: csi2
> + - const: csi2_phy
> + - const: csi2_pix
> + - const: csi2_rdi
> + - const: csi3_ahb
> + - const: csi3
> + - const: csi3_phy
> + - const: csi3_pix
> + - const: csi3_rdi
> + - const: vfe0
> + - const: vfe1
> + - const: csi_vfe0
> + - const: csi_vfe1
> + - const: iface
> + - const: bus
> +
> + interrupts:
> + minItems: 10
Same.
> + maxItems: 10
> +
> + interrupt-names:
> + items:
> + - const: csiphy0
> + - const: csiphy1
> + - const: csiphy2
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csid3
> + - const: ispif
> + - const: vfe0
> + - const: vfe1
> +
> + power-domains:
> + items:
> + - description: VFE GDSC - Video Front End, Global Distributed Switch Controller.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + description:
> + CSI input ports.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + items:
> + - const: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + port@1:
These look all the same, so just use patternPropreties (in "ports") with
proper pattern.
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + items:
> + - const: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + items:
> + - const: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + reg:
> + minItems: 14
> + maxItems: 14
> +
> + reg-names:
> + items:
> + - const: csiphy0
> + - const: csiphy0_clk_mux
> + - const: csiphy1
> + - const: csiphy1_clk_mux
> + - const: csiphy2
> + - const: csiphy2_clk_mux
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csid3
> + - const: ispif
> + - const: csi_clk_mux
> + - const: vfe0
> + - const: vfe1
> +
> + vdda-supply:
> + description:
> + Definition of the regulator used as analog power supply.
> +
> +required:
> + - clock-names
> + - clocks
> + - compatible
> + - interrupt-names
> + - interrupts
> + - power-domains
> + - reg
> + - reg-names
> + - vdda-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,gcc-msm8974.h>
> + #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
> + camss@fda00000 {
Generic node name, so "isp" I guess?
> + compatible = "qcom,msm8974-camss";
> + reg = <0xfda0ac00 0x200>,
> + <0xfda00030 0x4>,
> + <0xfda0b000 0x200>,
> + <0xfda00038 0x4>,
> + <0xfda0b400 0x200>,
> + <0xfda00040 0x4>,
> + <0xfda08000 0x100>,
> + <0xfda08400 0x100>,
> + <0xfda08800 0x100>,
> + <0xfda08c00 0x100>,
> + <0xfda0a000 0x800>,
> + <0xfda00020 0x10>,
> + <0xfda10000 0x1000>,
> + <0xfda14000 0x1000>;
> + reg-names = "csiphy0",
> + "csiphy0_clk_mux",
> + "csiphy1",
> + "csiphy1_clk_mux",
> + "csiphy2",
> + "csiphy2_clk_mux",
> + "csid0",
> + "csid1",
> + "csid2",
> + "csid3",
> + "ispif",
> + "csi_clk_mux",
> + "vfe0",
> + "vfe1";
> + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csid0",
> + "csid1",
> + "csid2",
> + "csid3",
> + "ispif",
> + "vfe0",
> + "vfe1";
> + power-domains = <&mmcc CAMSS_VFE_GDSC>;
> + clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
> + <&mmcc CAMSS_ISPIF_AHB_CLK>,
> + <&mmcc CAMSS_PHY0_CSI0PHYTIMER_CLK>,
> + <&mmcc CAMSS_PHY1_CSI1PHYTIMER_CLK>,
> + <&mmcc CAMSS_PHY2_CSI2PHYTIMER_CLK>,
> + <&mmcc CAMSS_CSI0_AHB_CLK>,
> + <&mmcc CAMSS_CSI0_CLK>,
> + <&mmcc CAMSS_CSI0PHY_CLK>,
> + <&mmcc CAMSS_CSI0PIX_CLK>,
> + <&mmcc CAMSS_CSI0RDI_CLK>,
> + <&mmcc CAMSS_CSI1_AHB_CLK>,
> + <&mmcc CAMSS_CSI1_CLK>,
> + <&mmcc CAMSS_CSI1PHY_CLK>,
> + <&mmcc CAMSS_CSI1PIX_CLK>,
> + <&mmcc CAMSS_CSI1RDI_CLK>,
> + <&mmcc CAMSS_CSI2_AHB_CLK>,
> + <&mmcc CAMSS_CSI2_CLK>,
> + <&mmcc CAMSS_CSI2PHY_CLK>,
> + <&mmcc CAMSS_CSI2PIX_CLK>,
> + <&mmcc CAMSS_CSI2RDI_CLK>,
> + <&mmcc CAMSS_CSI3_AHB_CLK>,
> + <&mmcc CAMSS_CSI3_CLK>,
> + <&mmcc CAMSS_CSI3PHY_CLK>,
> + <&mmcc CAMSS_CSI3PIX_CLK>,
> + <&mmcc CAMSS_CSI3RDI_CLK>,
> + <&mmcc CAMSS_VFE_VFE0_CLK>,
> + <&mmcc CAMSS_VFE_VFE1_CLK>,
> + <&mmcc CAMSS_CSI_VFE0_CLK>,
> + <&mmcc CAMSS_CSI_VFE1_CLK>,
> + <&mmcc CAMSS_VFE_VFE_AHB_CLK>,
> + <&mmcc CAMSS_VFE_VFE_AXI_CLK>;
> + clock-names = "top_ahb",
> + "ispif_ahb",
> + "csiphy0_timer",
> + "csiphy1_timer",
> + "csiphy2_timer",
> + "csi0_ahb",
> + "csi0",
> + "csi0_phy",
> + "csi0_pix",
> + "csi0_rdi",
> + "csi1_ahb",
> + "csi1",
> + "csi1_phy",
> + "csi1_pix",
> + "csi1_rdi",
> + "csi2_ahb",
> + "csi2",
> + "csi2_phy",
> + "csi2_pix",
> + "csi2_rdi",
> + "csi3_ahb",
> + "csi3",
> + "csi3_phy",
> + "csi3_pix",
> + "csi3_rdi",
> + "vfe0",
> + "vfe1",
> + "csi_vfe0",
> + "csi_vfe1",
> + "iface",
> + "bus";
> +
> + vdda-supply = <&pm8941_l12>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
This is not a complete example... empty ports node is useless, isn't it?
> + };
> + };
Best regards,
Krzysztof
next prev parent reply other threads:[~2022-05-23 10:07 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-22 16:27 [RFC PATCH 00/14] CAMSS support for MSM8974 Luca Weiss
2022-05-22 16:27 ` [RFC PATCH 01/14] media: dt-bindings: media: camss: Add qcom,msm8974-camss binding Luca Weiss
2022-05-23 10:07 ` Krzysztof Kozlowski [this message]
2022-06-02 13:01 ` Rob Herring
2022-05-22 16:27 ` [RFC PATCH 02/14] media: camss: Add CAMSS_8x74 camss version Luca Weiss
2022-05-26 12:32 ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 03/14] media: camss: vfe: Add support for 8x74 Luca Weiss
2022-05-26 12:36 ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 04/14] media: camss: video: " Luca Weiss
2022-05-26 12:37 ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 05/14] media: camss: csid: " Luca Weiss
2022-05-26 12:38 ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 06/14] media: camss: ispif: " Luca Weiss
2022-05-26 12:39 ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 07/14] media: camss: csiphy: " Luca Weiss
2022-05-26 12:40 ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 08/14] media: camss: Add 8x74 resources Luca Weiss
2022-05-26 12:42 ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 09/14] dt-bindings: i2c: qcom-cci: add QCOM MSM8974 compatible Luca Weiss
2022-05-23 10:07 ` Krzysztof Kozlowski
2022-05-22 16:27 ` [RFC PATCH 10/14] i2c: qcom-cci: add msm8974 compatible Luca Weiss
2022-06-14 20:20 ` Wolfram Sang
2022-06-15 17:13 ` Loic Poulain
2022-06-15 17:11 ` Loic Poulain
2022-05-22 16:27 ` [RFC PATCH 11/14] ARM: dts: qcom: msm8974: add CCI bus Luca Weiss
2022-05-26 12:16 ` Robert Foss
2022-05-22 16:28 ` [RFC PATCH 12/14] ARM: dts: qcom: msm8974: add CAMSS node Luca Weiss
2022-05-22 16:28 ` [RFC PATCH 13/14] ARM: dts: qcom: msm8974-FP2: Add OV8865 rear camera Luca Weiss
2022-05-22 16:28 ` [RFC PATCH 14/14] [DNM] media: camss: hacks for MSM8974 Luca Weiss
2022-05-23 12:39 ` [RFC PATCH 00/14] CAMSS support " Dmitry Baryshkov
2022-05-23 18:30 ` Brian Masney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=170dd20b-ab0b-0f61-bfe9-cb9167a2e133@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=luca@z3ntu.xyz \
--cc=matti.lehtimaki@gmail.com \
--cc=mchehab@kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robert.foss@linaro.org \
--cc=robh+dt@kernel.org \
--cc=todor.too@gmail.com \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).