From: Luca Weiss <luca@z3ntu.xyz>
To: linux-arm-msm@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org,
Loic Poulain <loic.poulain@linaro.org>,
Robert Foss <robert.foss@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Todor Tomov <todor.too@gmail.com>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
matti.lehtimaki@gmail.com, Luca Weiss <luca@z3ntu.xyz>
Subject: [RFC PATCH 12/14] ARM: dts: qcom: msm8974: add CAMSS node
Date: Sun, 22 May 2022 18:28:00 +0200 [thread overview]
Message-ID: <20220522162802.208275-13-luca@z3ntu.xyz> (raw)
In-Reply-To: <20220522162802.208275-1-luca@z3ntu.xyz>
Add a node for the camera subsystem found on msm8974.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 122 ++++++++++++++++++++++++++++
1 file changed, 122 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index a80b4ae71745..e684a9229f8c 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1615,6 +1615,128 @@ dsi0_phy: dsi-phy@fd922a00 {
};
};
+ camss: camss@fda00000 {
+ compatible = "qcom,msm8974-camss";
+ reg = <0xfda0ac00 0x200>,
+ <0xfda00030 0x4>,
+ <0xfda0b000 0x200>,
+ <0xfda00038 0x4>,
+ <0xfda0b400 0x200>,
+ <0xfda00040 0x4>,
+ <0xfda08000 0x100>,
+ <0xfda08400 0x100>,
+ <0xfda08800 0x100>,
+ <0xfda08c00 0x100>,
+ <0xfda0a000 0x800>,
+ <0xfda00020 0x10>,
+ <0xfda10000 0x1000>,
+ <0xfda14000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csiphy2",
+ "csiphy2_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0",
+ "vfe1";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "vfe0",
+ "vfe1";
+ power-domains = <&mmcc CAMSS_VFE_GDSC>;
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_ISPIF_AHB_CLK>,
+ <&mmcc CAMSS_PHY0_CSI0PHYTIMER_CLK>,
+ <&mmcc CAMSS_PHY1_CSI1PHYTIMER_CLK>,
+ <&mmcc CAMSS_PHY2_CSI2PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI0_AHB_CLK>,
+ <&mmcc CAMSS_CSI0_CLK>,
+ <&mmcc CAMSS_CSI0PHY_CLK>,
+ <&mmcc CAMSS_CSI0PIX_CLK>,
+ <&mmcc CAMSS_CSI0RDI_CLK>,
+ <&mmcc CAMSS_CSI1_AHB_CLK>,
+ <&mmcc CAMSS_CSI1_CLK>,
+ <&mmcc CAMSS_CSI1PHY_CLK>,
+ <&mmcc CAMSS_CSI1PIX_CLK>,
+ <&mmcc CAMSS_CSI1RDI_CLK>,
+ <&mmcc CAMSS_CSI2_AHB_CLK>,
+ <&mmcc CAMSS_CSI2_CLK>,
+ <&mmcc CAMSS_CSI2PHY_CLK>,
+ <&mmcc CAMSS_CSI2PIX_CLK>,
+ <&mmcc CAMSS_CSI2RDI_CLK>,
+ <&mmcc CAMSS_CSI3_AHB_CLK>,
+ <&mmcc CAMSS_CSI3_CLK>,
+ <&mmcc CAMSS_CSI3PHY_CLK>,
+ <&mmcc CAMSS_CSI3PIX_CLK>,
+ <&mmcc CAMSS_CSI3RDI_CLK>,
+ <&mmcc CAMSS_VFE_VFE0_CLK>,
+ <&mmcc CAMSS_VFE_VFE1_CLK>,
+ <&mmcc CAMSS_CSI_VFE0_CLK>,
+ <&mmcc CAMSS_CSI_VFE1_CLK>,
+ <&mmcc CAMSS_VFE_VFE_AHB_CLK>,
+ <&mmcc CAMSS_VFE_VFE_AXI_CLK>;
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csiphy2_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2_ahb",
+ "csi2",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "csi3_ahb",
+ "csi3",
+ "csi3_phy",
+ "csi3_pix",
+ "csi3_rdi",
+ "vfe0",
+ "vfe1",
+ "csi_vfe0",
+ "csi_vfe1",
+ "iface",
+ "bus";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
cci: cci@fda0c000 {
compatible = "qcom,msm8974-cci";
#address-cells = <1>;
--
2.36.0
next prev parent reply other threads:[~2022-05-22 16:28 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-22 16:27 [RFC PATCH 00/14] CAMSS support for MSM8974 Luca Weiss
2022-05-22 16:27 ` [RFC PATCH 01/14] media: dt-bindings: media: camss: Add qcom,msm8974-camss binding Luca Weiss
2022-05-23 10:07 ` Krzysztof Kozlowski
2022-06-02 13:01 ` Rob Herring
2022-05-22 16:27 ` [RFC PATCH 02/14] media: camss: Add CAMSS_8x74 camss version Luca Weiss
2022-05-26 12:32 ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 03/14] media: camss: vfe: Add support for 8x74 Luca Weiss
2022-05-26 12:36 ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 04/14] media: camss: video: " Luca Weiss
2022-05-26 12:37 ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 05/14] media: camss: csid: " Luca Weiss
2022-05-26 12:38 ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 06/14] media: camss: ispif: " Luca Weiss
2022-05-26 12:39 ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 07/14] media: camss: csiphy: " Luca Weiss
2022-05-26 12:40 ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 08/14] media: camss: Add 8x74 resources Luca Weiss
2022-05-26 12:42 ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 09/14] dt-bindings: i2c: qcom-cci: add QCOM MSM8974 compatible Luca Weiss
2022-05-23 10:07 ` Krzysztof Kozlowski
2022-05-22 16:27 ` [RFC PATCH 10/14] i2c: qcom-cci: add msm8974 compatible Luca Weiss
2022-06-14 20:20 ` Wolfram Sang
2022-06-15 17:13 ` Loic Poulain
2022-06-15 17:11 ` Loic Poulain
2022-05-22 16:27 ` [RFC PATCH 11/14] ARM: dts: qcom: msm8974: add CCI bus Luca Weiss
2022-05-26 12:16 ` Robert Foss
2022-05-22 16:28 ` Luca Weiss [this message]
2022-05-22 16:28 ` [RFC PATCH 13/14] ARM: dts: qcom: msm8974-FP2: Add OV8865 rear camera Luca Weiss
2022-05-22 16:28 ` [RFC PATCH 14/14] [DNM] media: camss: hacks for MSM8974 Luca Weiss
2022-05-23 12:39 ` [RFC PATCH 00/14] CAMSS support " Dmitry Baryshkov
2022-05-23 18:30 ` Brian Masney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220522162802.208275-13-luca@z3ntu.xyz \
--to=luca@z3ntu.xyz \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=matti.lehtimaki@gmail.com \
--cc=mchehab@kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robert.foss@linaro.org \
--cc=robh+dt@kernel.org \
--cc=todor.too@gmail.com \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).