* [RFC] [PATCH] media: marvell-ccic: use devm to release clk
@ 2013-11-05 9:33 lbyang
2013-11-05 16:11 ` Jonathan Corbet
2013-11-05 19:53 ` Uwe Kleine-König
0 siblings, 2 replies; 3+ messages in thread
From: lbyang @ 2013-11-05 9:33 UTC (permalink / raw)
To: corbet; +Cc: linux-media, u.kleine-koenig, linux
From: Libin Yang <lbyang@marvell.com>
Date: Tue, 5 Nov 2013 16:29:07 +0800
Subject: [PATCH] media: marvell-ccic: use devm to release clk
This patch uses devm to release the clks instead of releasing
manually.
And it adds enable/disable mipi_clk when getting its rate.
Signed-off-by: Libin Yang <lbyang@marvell.com>
---
drivers/media/platform/marvell-ccic/mmp-driver.c | 39
+++++-----------------
1 file changed, 8 insertions(+), 31 deletions(-)
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c
b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 70cb57f..054507f 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -142,12 +142,6 @@ static int mmpcam_power_up(struct mcam_camera
*mcam)
struct mmp_camera *cam = mcam_to_cam(mcam);
struct mmp_camera_platform_data *pdata;
- if (mcam->bus_type == V4L2_MBUS_CSI2) {
- cam->mipi_clk = devm_clk_get(mcam->dev, "mipi");
- if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0))
- return PTR_ERR(cam->mipi_clk);
- }
-
/*
* Turn on power and clocks to the controller.
*/
@@ -186,12 +180,6 @@ static void mmpcam_power_down(struct mcam_camera
*mcam)
gpio_set_value(pdata->sensor_power_gpio, 0);
gpio_set_value(pdata->sensor_reset_gpio, 0);
- if (mcam->bus_type == V4L2_MBUS_CSI2 && !IS_ERR(cam->mipi_clk)) {
- if (cam->mipi_clk)
- devm_clk_put(mcam->dev, cam->mipi_clk);
- cam->mipi_clk = NULL;
- }
-
mcam_clk_disable(mcam);
}
@@ -292,8 +280,9 @@ void mmpcam_calc_dphy(struct mcam_camera *mcam)
return;
/* get the escape clk, this is hard coded */
+ clk_prepare_enable(cam->mipi_clk);
tx_clk_esc = (clk_get_rate(cam->mipi_clk) / 1000000) / 12;
-
+ clk_disable_unprepare(cam->mipi_clk);
/*
* dphy[2] - CSI2_DPHY6:
* bit 0 ~ bit 7: CK Term Enable
@@ -325,19 +314,6 @@ static irqreturn_t mmpcam_irq(int irq, void *data)
return IRQ_RETVAL(handled);
}
-static void mcam_deinit_clk(struct mcam_camera *mcam)
-{
- unsigned int i;
-
- for (i = 0; i < NR_MCAM_CLK; i++) {
- if (!IS_ERR(mcam->clk[i])) {
- if (mcam->clk[i])
- devm_clk_put(mcam->dev, mcam->clk[i]);
- }
- mcam->clk[i] = NULL;
- }
-}
-
static void mcam_init_clk(struct mcam_camera *mcam)
{
unsigned int i;
@@ -371,7 +347,6 @@ static int mmpcam_probe(struct platform_device
*pdev)
if (cam == NULL)
return -ENOMEM;
cam->pdev = pdev;
- cam->mipi_clk = NULL;
INIT_LIST_HEAD(&cam->devlist);
mcam = &cam->mcam;
@@ -387,6 +362,11 @@ static int mmpcam_probe(struct platform_device
*pdev)
mcam->mclk_div = pdata->mclk_div;
mcam->bus_type = pdata->bus_type;
mcam->dphy = pdata->dphy;
+ if (mcam->bus_type == V4L2_MBUS_CSI2) {
+ cam->mipi_clk = devm_clk_get(mcam->dev, "mipi");
+ if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0))
+ return PTR_ERR(cam->mipi_clk);
+ }
mcam->mipi_enabled = false;
mcam->lane = pdata->lane;
mcam->chip_id = MCAM_ARMADA610;
@@ -444,7 +424,7 @@ static int mmpcam_probe(struct platform_device
*pdev)
*/
ret = mmpcam_power_up(mcam);
if (ret)
- goto out_deinit_clk;
+ return ret;
ret = mccic_register(mcam);
if (ret)
goto out_power_down;
@@ -469,8 +449,6 @@ out_unregister:
mccic_shutdown(mcam);
out_power_down:
mmpcam_power_down(mcam);
-out_deinit_clk:
- mcam_deinit_clk(mcam);
return ret;
}
@@ -482,7 +460,6 @@ static int mmpcam_remove(struct mmp_camera *cam)
mmpcam_remove_device(cam);
mccic_shutdown(mcam);
mmpcam_power_down(mcam);
- mcam_deinit_clk(mcam);
return 0;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [RFC] [PATCH] media: marvell-ccic: use devm to release clk
2013-11-05 9:33 [RFC] [PATCH] media: marvell-ccic: use devm to release clk lbyang
@ 2013-11-05 16:11 ` Jonathan Corbet
2013-11-05 19:53 ` Uwe Kleine-König
1 sibling, 0 replies; 3+ messages in thread
From: Jonathan Corbet @ 2013-11-05 16:11 UTC (permalink / raw)
To: lbyang; +Cc: linux-media, u.kleine-koenig, linux
On Tue, 5 Nov 2013 17:33:16 +0800
lbyang <lbyang@marvell.com> wrote:
> This patch uses devm to release the clks instead of releasing
> manually.
> And it adds enable/disable mipi_clk when getting its rate.
I can't really test this, so I'll have to assume it works :)
Acked-by: Jonathan Corbet <corbet@lwn.net>
However: it seems that crediting Uwe Kleine-König with a Reported-by would
be the right thing to do.
Thanks,
jon
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [RFC] [PATCH] media: marvell-ccic: use devm to release clk
2013-11-05 9:33 [RFC] [PATCH] media: marvell-ccic: use devm to release clk lbyang
2013-11-05 16:11 ` Jonathan Corbet
@ 2013-11-05 19:53 ` Uwe Kleine-König
1 sibling, 0 replies; 3+ messages in thread
From: Uwe Kleine-König @ 2013-11-05 19:53 UTC (permalink / raw)
To: lbyang; +Cc: corbet, linux-media, linux
On Tue, Nov 05, 2013 at 05:33:16PM +0800, lbyang wrote:
> From: Libin Yang <lbyang@marvell.com>
> Date: Tue, 5 Nov 2013 16:29:07 +0800
> Subject: [PATCH] media: marvell-ccic: use devm to release clk
>
> This patch uses devm to release the clks instead of releasing
> manually.
> And it adds enable/disable mipi_clk when getting its rate.
>
> Signed-off-by: Libin Yang <lbyang@marvell.com>
The driver still is no beauty, but with this patch the clk usage at
least seems to be API conformant.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
> drivers/media/platform/marvell-ccic/mmp-driver.c | 39
> +++++-----------------
> 1 file changed, 8 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c
> b/drivers/media/platform/marvell-ccic/mmp-driver.c
> index 70cb57f..054507f 100644
> --- a/drivers/media/platform/marvell-ccic/mmp-driver.c
> +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
> @@ -142,12 +142,6 @@ static int mmpcam_power_up(struct mcam_camera
> *mcam)
> struct mmp_camera *cam = mcam_to_cam(mcam);
> struct mmp_camera_platform_data *pdata;
>
> - if (mcam->bus_type == V4L2_MBUS_CSI2) {
> - cam->mipi_clk = devm_clk_get(mcam->dev, "mipi");
> - if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0))
> - return PTR_ERR(cam->mipi_clk);
> - }
> -
> /*
> * Turn on power and clocks to the controller.
> */
> @@ -186,12 +180,6 @@ static void mmpcam_power_down(struct mcam_camera
> *mcam)
> gpio_set_value(pdata->sensor_power_gpio, 0);
> gpio_set_value(pdata->sensor_reset_gpio, 0);
>
> - if (mcam->bus_type == V4L2_MBUS_CSI2 && !IS_ERR(cam->mipi_clk)) {
> - if (cam->mipi_clk)
> - devm_clk_put(mcam->dev, cam->mipi_clk);
> - cam->mipi_clk = NULL;
> - }
> -
> mcam_clk_disable(mcam);
> }
>
> @@ -292,8 +280,9 @@ void mmpcam_calc_dphy(struct mcam_camera *mcam)
> return;
>
> /* get the escape clk, this is hard coded */
> + clk_prepare_enable(cam->mipi_clk);
> tx_clk_esc = (clk_get_rate(cam->mipi_clk) / 1000000) / 12;
> -
> + clk_disable_unprepare(cam->mipi_clk);
> /*
> * dphy[2] - CSI2_DPHY6:
> * bit 0 ~ bit 7: CK Term Enable
> @@ -325,19 +314,6 @@ static irqreturn_t mmpcam_irq(int irq, void *data)
> return IRQ_RETVAL(handled);
> }
>
> -static void mcam_deinit_clk(struct mcam_camera *mcam)
> -{
> - unsigned int i;
> -
> - for (i = 0; i < NR_MCAM_CLK; i++) {
> - if (!IS_ERR(mcam->clk[i])) {
> - if (mcam->clk[i])
> - devm_clk_put(mcam->dev, mcam->clk[i]);
> - }
> - mcam->clk[i] = NULL;
> - }
> -}
> -
> static void mcam_init_clk(struct mcam_camera *mcam)
> {
> unsigned int i;
> @@ -371,7 +347,6 @@ static int mmpcam_probe(struct platform_device
> *pdev)
> if (cam == NULL)
> return -ENOMEM;
> cam->pdev = pdev;
> - cam->mipi_clk = NULL;
> INIT_LIST_HEAD(&cam->devlist);
>
> mcam = &cam->mcam;
> @@ -387,6 +362,11 @@ static int mmpcam_probe(struct platform_device
> *pdev)
> mcam->mclk_div = pdata->mclk_div;
> mcam->bus_type = pdata->bus_type;
> mcam->dphy = pdata->dphy;
> + if (mcam->bus_type == V4L2_MBUS_CSI2) {
> + cam->mipi_clk = devm_clk_get(mcam->dev, "mipi");
> + if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0))
> + return PTR_ERR(cam->mipi_clk);
> + }
> mcam->mipi_enabled = false;
> mcam->lane = pdata->lane;
> mcam->chip_id = MCAM_ARMADA610;
> @@ -444,7 +424,7 @@ static int mmpcam_probe(struct platform_device
> *pdev)
> */
> ret = mmpcam_power_up(mcam);
> if (ret)
> - goto out_deinit_clk;
> + return ret;
> ret = mccic_register(mcam);
> if (ret)
> goto out_power_down;
> @@ -469,8 +449,6 @@ out_unregister:
> mccic_shutdown(mcam);
> out_power_down:
> mmpcam_power_down(mcam);
> -out_deinit_clk:
> - mcam_deinit_clk(mcam);
> return ret;
> }
>
> @@ -482,7 +460,6 @@ static int mmpcam_remove(struct mmp_camera *cam)
> mmpcam_remove_device(cam);
> mccic_shutdown(mcam);
> mmpcam_power_down(mcam);
> - mcam_deinit_clk(mcam);
> return 0;
> }
>
> --
> 1.7.9.5
>
>
>
>
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-11-05 19:53 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-11-05 9:33 [RFC] [PATCH] media: marvell-ccic: use devm to release clk lbyang
2013-11-05 16:11 ` Jonathan Corbet
2013-11-05 19:53 ` Uwe Kleine-König
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).