From: Pavel Machek <pavel@ucw.cz>
To: Sebastian Reichel <sre@kernel.org>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>,
sakari.ailus@iki.fi, pali.rohar@gmail.com,
linux-media@vger.kernel.org
Subject: Re: [RFC PATCH 00/24] Make Nokia N900 cameras working
Date: Mon, 2 May 2016 09:06:26 +0200 [thread overview]
Message-ID: <20160502070626.GD13215@amd> (raw)
In-Reply-To: <20160427165928.GB8156@earth>
Hi!
> On Wed, Apr 27, 2016 at 06:45:29PM +0200, Pavel Machek wrote:
> > > I don't have pre-production N900s. The phone I use for development
> > > is HW revision 2101 with Finish keyboard layout. Apart from that
> > > I have my productive phone, which is rev 2204 with German layout.
> >
> > How do you check hw revision?
>
> 0xFFFF tells you the HW revision (e.g. when executed with -I, but
> also during normal kernel loading operation). Apart from that there
> is /proc/cpuinfo.
/proc/cpuinfo says revision : 0000. 0xFFFF says:
Initializing NOLO...
Device: RX-51
HW revision: 2101
NOLO version: 1.4.14
... So I seem to have 2101. Ok, and the prepared initrd seems to work
for me. (Thanks!)
length: 640256 offset: 4501504 timestamp type: monotonic
Buffer 7 mapped at address 0xb68fb000.
Press enter to start capture
0 (0) [-] 0 640256 bytes 532.452761 532.452913 28.544 fps
1 (1) [-] 1 640256 bytes 532.518129 532.518221 15.298 fps
/camera$ ./yavta --capture=8 --pause --skip 0 --format UYVY --size
656x488 /dev/video6 --file=/tmp/delme#
/camera$ md5sum /tmp/delme*
541b8dfeab4f56824274aa7b61c88dcf /tmp/delme000000
9b685af72dedd12ed519bdc68475e671 /tmp/delme000001
67128a3af14be16c94f7e26c365f2b21 /tmp/delme000002
0d411d0052710b15af05b6a7e51a43f1 /tmp/delme000003
74a44a4a0f33354b86af6e419e624308 /tmp/delme000004
38842dc2e7cdc1163012f4811f2c293c /tmp/delme000005
78b88cfe381560fd6e3b8647ec553f10 /tmp/delme000006
58d0fc91cc0d1d3cee1a900eb8ee5094 /tmp/delme000007
So yes, it seems to work here. At least as a random generator :-).
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2016-05-02 7:06 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20160420081427.GZ32125@valkosipuli.retiisi.org.uk>
2016-04-24 21:08 ` [RFC PATCH 00/24] Make Nokia N900 cameras working Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 01/24] V4L fixes Ivaylo Dimitrov
2016-04-24 22:05 ` Pavel Machek
2016-04-25 7:29 ` Hans Verkuil
2016-04-25 13:25 ` Sakari Ailus
2016-04-25 16:32 ` Ivaylo Dimitrov
2016-04-29 7:41 ` Sakari Ailus
2016-04-24 21:08 ` [RFC PATCH 02/24] smiaregs: Generic i2c register writing Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 03/24] et8ek8: Toshiba 5MP sensor driver Ivaylo Dimitrov
2016-05-01 10:44 ` Sakari Ailus
2016-05-01 12:31 ` Ivaylo Dimitrov
2016-05-01 12:32 ` Ivaylo Dimitrov
2016-05-01 12:50 ` Ivaylo Dimitrov
2016-05-01 13:41 ` Sakari Ailus
2016-05-03 14:50 ` [PATCH] [media]: Driver for Toshiba et8ek8 5MP sensor Ivaylo Dimitrov
2016-05-22 10:07 ` Ivaylo Dimitrov
2016-05-24 11:19 ` Pavel Machek
2016-06-04 19:16 ` Ivaylo Dimitrov
2016-06-06 9:04 ` Sylwester Nawrocki
2016-05-25 21:45 ` Sakari Ailus
2016-06-04 19:54 ` Ivaylo Dimitrov
2016-06-09 23:13 ` Sakari Ailus
2016-04-24 21:08 ` [RFC PATCH 04/24] smiapp-pll: Take existing divisor into account in minimum divisor check Ivaylo Dimitrov
2016-05-01 10:45 ` Sakari Ailus
2016-05-03 18:25 ` Ivaylo Dimitrov
2016-05-24 9:09 ` Pali Rohár
2016-05-24 10:17 ` Pavel Machek
2016-04-24 21:08 ` [RFC PATCH 05/24] smiapp: Add smiapp_has_quirk() to tell whether a quirk is implemented Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 06/24] smiapp: Add quirk control support Ivaylo Dimitrov
2016-05-01 10:46 ` Sakari Ailus
2016-05-03 18:32 ` Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 07/24] v4l: of: Call CSI2 bus csi2, not csi Ivaylo Dimitrov
2016-04-29 13:22 ` Pavel Machek
2016-04-24 21:08 ` [RFC PATCH 08/24] v4l: of: Obtain data bus type from bus-type property Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 09/24] v4l: Add CSI1 and CCP2 bus type to enum v4l2_mbus_type Ivaylo Dimitrov
2016-04-29 13:27 ` Pavel Machek
2016-04-24 21:08 ` [RFC PATCH 10/24] v4l: of: Separate lane parsing from CSI-2 bus parameter parsing Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 11/24] dt: bindings: v4l: Add bus-type video interface property Ivaylo Dimitrov
2016-04-29 13:28 ` Pavel Machek
2016-04-24 21:08 ` [RFC PATCH 12/24] dt: bindings: Add CSI1/CCP2 related properties to video-interfaces.txt Ivaylo Dimitrov
2016-04-29 13:39 ` Pavel Machek
2016-04-24 21:08 ` [RFC PATCH 13/24] v4l: of: Support CSI-1 and CCP2 busses Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 14/24] media: et8ek8: add device tree binding document Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 15/24] media: add subdev type for bus switch Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 16/24] media: video-bus-switch: new driver Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 17/24] smiapp: add CCP2 support Ivaylo Dimitrov
2016-05-01 10:57 ` Sakari Ailus
2016-04-24 21:08 ` [RFC PATCH 18/24] v4l2-async: per notifier locking Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 19/24] v4l2_device_register_subdev_nodes: allow calling multiple times Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 20/24] ARM: dts: omap3-n900: enable cameras Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 21/24] omap3isp: dt: Add support for CSI1/CCP2 busses Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 22/24] [media] omap3isp: Correctly set IO_OUT_SEL and VP_CLK_POL for CCP2 mode Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 23/24] [media] omap3isp: Make sure CSI1 interface is enabled in CPP2 mode Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 24/24] ARM: dts: omap3-n900: enable cameras - remove invalid entry Ivaylo Dimitrov
2016-04-24 21:55 ` [RFC PATCH 00/24] Make Nokia N900 cameras working Pavel Machek
2016-04-25 6:33 ` Ivaylo Dimitrov
2016-04-25 17:09 ` Pavel Machek
2016-04-25 17:21 ` Ivaylo Dimitrov
2016-04-27 21:07 ` Pavel Machek
2016-04-25 10:40 ` Pali Rohár
2016-04-25 14:06 ` Pavel Machek
2016-04-25 14:09 ` Hans Verkuil
2016-04-27 21:09 ` Pavel Machek
2016-04-25 14:14 ` Pali Rohár
2016-04-25 17:14 ` Pali Rohár
2016-04-25 16:58 ` Pavel Machek
2016-04-25 17:17 ` Ivaylo Dimitrov
2016-04-25 18:40 ` Pavel Machek
2016-04-25 19:17 ` Ivaylo Dimitrov
2016-04-25 20:41 ` Pavel Machek
2016-04-25 20:53 ` Ivaylo Dimitrov
2016-04-25 22:07 ` Pavel Machek
2016-04-26 4:21 ` Ivaylo Dimitrov
2016-04-27 8:30 ` Pavel Machek
2016-04-27 3:08 ` Sebastian Reichel
2016-04-27 5:05 ` Ivaylo Dimitrov
2016-04-27 6:57 ` Ivaylo Dimitrov
2016-04-27 16:42 ` Sebastian Reichel
2016-04-27 16:45 ` Pavel Machek
2016-04-27 16:59 ` Sebastian Reichel
2016-05-02 7:06 ` Pavel Machek [this message]
2016-04-27 17:12 ` Ивайло Димитров
2016-04-27 19:05 ` Pavel Machek
2016-04-29 0:05 ` Sebastian Reichel
2016-04-29 17:45 ` Sebastian Reichel
2016-04-29 18:44 ` Ivaylo Dimitrov
2016-05-01 10:37 ` Sakari Ailus
2016-05-01 9:03 ` Pavel Machek
2016-04-27 20:30 ` Pavel Machek
2016-06-17 16:42 ` Nokia N900 cameras -- pipeline setup in python (was Re: [RFC PATCH 00/24] Make Nokia N900 cameras working) Pavel Machek
2016-06-17 17:12 ` Pavel Machek
2016-06-20 17:00 ` Pavel Machek
2016-06-20 20:59 ` Sakari Ailus
2016-06-21 18:05 ` Pavel Machek
2016-06-22 7:22 ` Sakari Ailus
2016-06-22 11:18 ` Pavel Machek
2016-07-01 7:31 ` square-only image on Nokia N900 camera " Pavel Machek
2016-07-01 8:50 ` Pavel Machek
2016-07-01 11:01 ` Pavel Machek
2016-07-01 19:40 ` Pavel Machek
2016-06-24 16:21 ` [RFC PATCH 00/24] Make Nokia N900 cameras working Pavel Machek
2016-08-27 13:48 ` fcam-dev support for new kernels -- " Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160502070626.GD13215@amd \
--to=pavel@ucw.cz \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=sakari.ailus@iki.fi \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).