From: Pavel Machek <pavel@ucw.cz>
To: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Sebastian Reichel <sre@kernel.org>,
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>,
pali.rohar@gmail.com, linux-media@vger.kernel.org
Subject: Re: Nokia N900 cameras -- pipeline setup in python (was Re: [RFC PATCH 00/24] Make Nokia N900 cameras working)
Date: Wed, 22 Jun 2016 13:18:30 +0200 [thread overview]
Message-ID: <20160622111830.GA26788@amd> (raw)
In-Reply-To: <20160620205904.GL24980@valkosipuli.retiisi.org.uk>
Hi!
I tried to capture 1.2Mpix images, then scale them down to 800x600
using hardware... and results were kernel dying.
[12552.400146] [<c062561c>] (isp_video_start_streaming) from
[<c061c6e8>] (vb2_start_streaming+0x5c/0x154)
[12552.400146] [<c061c6e8>] (vb2_start_streaming) from [<c061e5f8>]
(vb2_core_streamon+0x104/0x160)
[12552.400177] [<c061e5f8>] (vb2_core_streamon) from [<c0625260>]
(isp_video_streamon+0x17c/0x27c)
[12552.400207] [<c0625260>] (isp_video_streamon) from [<c0607a28>]
(v4l_streamon+0x18/0x1c)
[12552.400238] [<c0607a28>] (v4l_streamon) from [<c06096ac>]
(__video_do_ioctl+0x24c/0x2e8)
[12552.400268] [<c06096ac>] (__video_do_ioctl) from [<c060b2b0>]
(video_usercopy+0x110/0x600)
[12552.400299] [<c060b2b0>] (video_usercopy) from [<c060645c>]
(v4l2_ioctl+0x98/0xb8)
[12552.400329] [<c060645c>] (v4l2_ioctl) from [<c0269d28>]
(do_vfs_ioctl+0x80/0x948)
[12552.400329] [<c0269d28>] (do_vfs_ioctl) from [<c026a654>]
(SyS_ioctl+0x64/0x74)
[12552.400360] [<c026a654>] (SyS_ioctl) from [<c0107860>]
(ret_fast_syscall+0x0/0x3c)
[12552.400390] ---[ end trace b4627b34449829a7 ]---
[12552.400421] In-band Error seen by MPU at address 0
[12552.400421] ------------[ cut here ]------------
[12552.400451] WARNING: CPU: 0 PID: 3936 at
drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124
[12552.400482] Modules linked in:
[12552.400482] CPU: 0 PID: 3936 Comm: mplayer Tainted: G W
4.6.0-177572-g501bb64-dirty #360
[12552.400512] Hardware name: Nokia RX-51 board
I did more experiments before, and usually it does not end like
this. Usually, when I set up capture with greater resolution than cca
800x600, I get 4 copies of image above each other.
If you know how to get images with greater resolution, let me know.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2016-06-22 11:20 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20160420081427.GZ32125@valkosipuli.retiisi.org.uk>
2016-04-24 21:08 ` [RFC PATCH 00/24] Make Nokia N900 cameras working Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 01/24] V4L fixes Ivaylo Dimitrov
2016-04-24 22:05 ` Pavel Machek
2016-04-25 7:29 ` Hans Verkuil
2016-04-25 13:25 ` Sakari Ailus
2016-04-25 16:32 ` Ivaylo Dimitrov
2016-04-29 7:41 ` Sakari Ailus
2016-04-24 21:08 ` [RFC PATCH 02/24] smiaregs: Generic i2c register writing Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 03/24] et8ek8: Toshiba 5MP sensor driver Ivaylo Dimitrov
2016-05-01 10:44 ` Sakari Ailus
2016-05-01 12:31 ` Ivaylo Dimitrov
2016-05-01 12:32 ` Ivaylo Dimitrov
2016-05-01 12:50 ` Ivaylo Dimitrov
2016-05-01 13:41 ` Sakari Ailus
2016-05-03 14:50 ` [PATCH] [media]: Driver for Toshiba et8ek8 5MP sensor Ivaylo Dimitrov
2016-05-22 10:07 ` Ivaylo Dimitrov
2016-05-24 11:19 ` Pavel Machek
2016-06-04 19:16 ` Ivaylo Dimitrov
2016-06-06 9:04 ` Sylwester Nawrocki
2016-05-25 21:45 ` Sakari Ailus
2016-06-04 19:54 ` Ivaylo Dimitrov
2016-06-09 23:13 ` Sakari Ailus
2016-04-24 21:08 ` [RFC PATCH 04/24] smiapp-pll: Take existing divisor into account in minimum divisor check Ivaylo Dimitrov
2016-05-01 10:45 ` Sakari Ailus
2016-05-03 18:25 ` Ivaylo Dimitrov
2016-05-24 9:09 ` Pali Rohár
2016-05-24 10:17 ` Pavel Machek
2016-04-24 21:08 ` [RFC PATCH 05/24] smiapp: Add smiapp_has_quirk() to tell whether a quirk is implemented Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 06/24] smiapp: Add quirk control support Ivaylo Dimitrov
2016-05-01 10:46 ` Sakari Ailus
2016-05-03 18:32 ` Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 07/24] v4l: of: Call CSI2 bus csi2, not csi Ivaylo Dimitrov
2016-04-29 13:22 ` Pavel Machek
2016-04-24 21:08 ` [RFC PATCH 08/24] v4l: of: Obtain data bus type from bus-type property Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 09/24] v4l: Add CSI1 and CCP2 bus type to enum v4l2_mbus_type Ivaylo Dimitrov
2016-04-29 13:27 ` Pavel Machek
2016-04-24 21:08 ` [RFC PATCH 10/24] v4l: of: Separate lane parsing from CSI-2 bus parameter parsing Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 11/24] dt: bindings: v4l: Add bus-type video interface property Ivaylo Dimitrov
2016-04-29 13:28 ` Pavel Machek
2016-04-24 21:08 ` [RFC PATCH 12/24] dt: bindings: Add CSI1/CCP2 related properties to video-interfaces.txt Ivaylo Dimitrov
2016-04-29 13:39 ` Pavel Machek
2016-04-24 21:08 ` [RFC PATCH 13/24] v4l: of: Support CSI-1 and CCP2 busses Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 14/24] media: et8ek8: add device tree binding document Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 15/24] media: add subdev type for bus switch Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 16/24] media: video-bus-switch: new driver Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 17/24] smiapp: add CCP2 support Ivaylo Dimitrov
2016-05-01 10:57 ` Sakari Ailus
2016-04-24 21:08 ` [RFC PATCH 18/24] v4l2-async: per notifier locking Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 19/24] v4l2_device_register_subdev_nodes: allow calling multiple times Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 20/24] ARM: dts: omap3-n900: enable cameras Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 21/24] omap3isp: dt: Add support for CSI1/CCP2 busses Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 22/24] [media] omap3isp: Correctly set IO_OUT_SEL and VP_CLK_POL for CCP2 mode Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 23/24] [media] omap3isp: Make sure CSI1 interface is enabled in CPP2 mode Ivaylo Dimitrov
2016-04-24 21:08 ` [RFC PATCH 24/24] ARM: dts: omap3-n900: enable cameras - remove invalid entry Ivaylo Dimitrov
2016-04-24 21:55 ` [RFC PATCH 00/24] Make Nokia N900 cameras working Pavel Machek
2016-04-25 6:33 ` Ivaylo Dimitrov
2016-04-25 17:09 ` Pavel Machek
2016-04-25 17:21 ` Ivaylo Dimitrov
2016-04-27 21:07 ` Pavel Machek
2016-04-25 10:40 ` Pali Rohár
2016-04-25 14:06 ` Pavel Machek
2016-04-25 14:09 ` Hans Verkuil
2016-04-27 21:09 ` Pavel Machek
2016-04-25 14:14 ` Pali Rohár
2016-04-25 17:14 ` Pali Rohár
2016-04-25 16:58 ` Pavel Machek
2016-04-25 17:17 ` Ivaylo Dimitrov
2016-04-25 18:40 ` Pavel Machek
2016-04-25 19:17 ` Ivaylo Dimitrov
2016-04-25 20:41 ` Pavel Machek
2016-04-25 20:53 ` Ivaylo Dimitrov
2016-04-25 22:07 ` Pavel Machek
2016-04-26 4:21 ` Ivaylo Dimitrov
2016-04-27 8:30 ` Pavel Machek
2016-04-27 3:08 ` Sebastian Reichel
2016-04-27 5:05 ` Ivaylo Dimitrov
2016-04-27 6:57 ` Ivaylo Dimitrov
2016-04-27 16:42 ` Sebastian Reichel
2016-04-27 16:45 ` Pavel Machek
2016-04-27 16:59 ` Sebastian Reichel
2016-05-02 7:06 ` Pavel Machek
2016-04-27 17:12 ` Ивайло Димитров
2016-04-27 19:05 ` Pavel Machek
2016-04-29 0:05 ` Sebastian Reichel
2016-04-29 17:45 ` Sebastian Reichel
2016-04-29 18:44 ` Ivaylo Dimitrov
2016-05-01 10:37 ` Sakari Ailus
2016-05-01 9:03 ` Pavel Machek
2016-04-27 20:30 ` Pavel Machek
2016-06-17 16:42 ` Nokia N900 cameras -- pipeline setup in python (was Re: [RFC PATCH 00/24] Make Nokia N900 cameras working) Pavel Machek
2016-06-17 17:12 ` Pavel Machek
2016-06-20 17:00 ` Pavel Machek
2016-06-20 20:59 ` Sakari Ailus
2016-06-21 18:05 ` Pavel Machek
2016-06-22 7:22 ` Sakari Ailus
2016-06-22 11:18 ` Pavel Machek [this message]
2016-07-01 7:31 ` square-only image on Nokia N900 camera " Pavel Machek
2016-07-01 8:50 ` Pavel Machek
2016-07-01 11:01 ` Pavel Machek
2016-07-01 19:40 ` Pavel Machek
2016-06-24 16:21 ` [RFC PATCH 00/24] Make Nokia N900 cameras working Pavel Machek
2016-08-27 13:48 ` fcam-dev support for new kernels -- " Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160622111830.GA26788@amd \
--to=pavel@ucw.cz \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=sakari.ailus@iki.fi \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).