* mceusb xhci issue?
@ 2016-04-25 4:06 Wade Berrier
2016-04-25 17:15 ` Sean Young
0 siblings, 1 reply; 17+ messages in thread
From: Wade Berrier @ 2016-04-25 4:06 UTC (permalink / raw)
To: linux-media
Hello,
I have a mceusb compatible transceiver that only seems to work with
certain computers. I'm testing this on centos7 (3.10.0) and fedora23
(4.4.7).
The only difference I can see is that the working computer shows
"using uhci_hcd" and the non working shows "using xhci_hcd".
Here's the dmesg output of the non-working version:
---------------------
[ 217.951079] usb 1-5: new full-speed USB device number 10 using xhci_hcd
[ 218.104087] usb 1-5: device descriptor read/64, error -71
[ 218.371010] usb 1-5: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32
[ 218.371019] usb 1-5: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 32
[ 218.373591] usb 1-5: New USB device found, idVendor=1784, idProduct=0006
[ 218.373600] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 218.373605] usb 1-5: Product: eHome Infrared Transceiver
[ 218.373608] usb 1-5: Manufacturer: TopSeed Technology Corp.
[ 218.373611] usb 1-5: SerialNumber: TS004RrP
[ 218.376082] Registered IR keymap rc-rc6-mce
[ 218.376277] input: Media Center Ed. eHome Infrared Remote Transceiver (1784:0006) as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/rc/rc0/input13
[ 218.376387] rc0: Media Center Ed. eHome Infrared Remote Transceiver (1784:0006) as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/rc/rc0
[ 218.377439] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input14
[ 218.377733] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 218.508970] mceusb 1-5:1.0: Registered TopSeed Technology Corp. eHome Infrared Transceiver with mce emulator interface version 1
[ 218.508976] mceusb 1-5:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active)
---------------------
and the working version:
---------------------
[ 407.226018] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[ 412.329019] usb 2-2: device descriptor read/64, error -110
[ 412.578054] usb 2-2: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32
[ 412.578540] usb 2-2: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 32
[ 412.613053] usb 2-2: New USB device found, idVendor=1784, idProduct=0006
[ 412.613542] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 412.614172] usb 2-2: Product: eHome Infrared Transceiver
[ 412.615060] usb 2-2: Manufacturer: TopSeed Technology Corp.
[ 412.615930] usb 2-2: SerialNumber: TS004RrP
[ 412.624068] Registered IR keymap rc-rc6-mce
[ 412.624672] input: Media Center Ed. eHome Infrared Remote Transceiver (1784:0006) as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/rc/rc0/input22
[ 412.625404] rc0: Media Center Ed. eHome Infrared Remote Transceiver (1784:0006) as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/rc/rc0
[ 412.626251] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input23
[ 412.627627] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 412.782038] mceusb 2-2:1.0: Registered TopSeed Technology Corp. eHome Infrared Transceiver with mce emulator interface version 1
[ 412.782594] mceusb 2-2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
---------------------
It seems like there's been some similar history with this driver:
https://patchwork.linuxtv.org/patch/21648/
Any suggestions? Where to go from here? Any tips or workarounds would
be appreciated.
Thanks,
Wade
P.S. some notes about leading up to this was posted on the lirc
mailing list:
https://sourceforge.net/p/lirc/mailman/message/35036744/
https://sourceforge.net/p/lirc/mailman/message/35038602/
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: mceusb xhci issue?
2016-04-25 4:06 mceusb xhci issue? Wade Berrier
@ 2016-04-25 17:15 ` Sean Young
2016-04-26 3:16 ` Wade Berrier
0 siblings, 1 reply; 17+ messages in thread
From: Sean Young @ 2016-04-25 17:15 UTC (permalink / raw)
To: Wade Berrier; +Cc: linux-media
On Sun, Apr 24, 2016 at 10:06:33PM -0600, Wade Berrier wrote:
> Hello,
>
> I have a mceusb compatible transceiver that only seems to work with
> certain computers. I'm testing this on centos7 (3.10.0) and fedora23
> (4.4.7).
>
> The only difference I can see is that the working computer shows
> "using uhci_hcd" and the non working shows "using xhci_hcd".
>
> Here's the dmesg output of the non-working version:
>
> ---------------------
>
> [ 217.951079] usb 1-5: new full-speed USB device number 10 using xhci_hcd
> [ 218.104087] usb 1-5: device descriptor read/64, error -71
> [ 218.371010] usb 1-5: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32
> [ 218.371019] usb 1-5: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 32
That's odd. Can you post a "lsusb -vvv" of the device please?
Thanks,
Sean
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: mceusb xhci issue?
2016-04-25 17:15 ` Sean Young
@ 2016-04-26 3:16 ` Wade Berrier
2016-04-27 20:07 ` Sean Young
0 siblings, 1 reply; 17+ messages in thread
From: Wade Berrier @ 2016-04-26 3:16 UTC (permalink / raw)
To: Sean Young; +Cc: linux-media
On Apr 25 18:15, Sean Young wrote:
> On Sun, Apr 24, 2016 at 10:06:33PM -0600, Wade Berrier wrote:
> > Hello,
> >
> > I have a mceusb compatible transceiver that only seems to work with
> > certain computers. I'm testing this on centos7 (3.10.0) and fedora23
> > (4.4.7).
> >
> > The only difference I can see is that the working computer shows
> > "using uhci_hcd" and the non working shows "using xhci_hcd".
> >
> > Here's the dmesg output of the non-working version:
> >
> > ---------------------
> >
> > [ 217.951079] usb 1-5: new full-speed USB device number 10 using xhci_hcd
> > [ 218.104087] usb 1-5: device descriptor read/64, error -71
> > [ 218.371010] usb 1-5: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32
> > [ 218.371019] usb 1-5: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 32
>
> That's odd. Can you post a "lsusb -vvv" of the device please?
>
Sure.
-------------------
Bus 002 Device 009: ID 1784:0006 TopSeed Technology Corp. eHome Infrared Transceiver
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1784 TopSeed Technology Corp.
idProduct 0x0006 eHome Infrared Transceiver
bcdDevice 1.02
iManufacturer 1 TopSeed Technology Corp.
iProduct 2 eHome Infrared Transceiver
iSerial 3 TS004RrP
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Device Status: 0x0001
Self Powered
-------------------
Also, here's a link to a response on the lirc list:
https://sourceforge.net/p/lirc/mailman/message/35039126/
Wade
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: mceusb xhci issue?
2016-04-26 3:16 ` Wade Berrier
@ 2016-04-27 20:07 ` Sean Young
2016-05-15 2:29 ` Wade Berrier
0 siblings, 1 reply; 17+ messages in thread
From: Sean Young @ 2016-04-27 20:07 UTC (permalink / raw)
To: Wade Berrier; +Cc: linux-media
On Mon, Apr 25, 2016 at 09:16:51PM -0600, Wade Berrier wrote:
> On Apr 25 18:15, Sean Young wrote:
> > On Sun, Apr 24, 2016 at 10:06:33PM -0600, Wade Berrier wrote:
> > > Hello,
> > >
> > > I have a mceusb compatible transceiver that only seems to work with
> > > certain computers. I'm testing this on centos7 (3.10.0) and fedora23
> > > (4.4.7).
> > >
> > > The only difference I can see is that the working computer shows
> > > "using uhci_hcd" and the non working shows "using xhci_hcd".
> > >
> > > Here's the dmesg output of the non-working version:
> > >
> > > ---------------------
> > >
> > > [ 217.951079] usb 1-5: new full-speed USB device number 10 using xhci_hcd
> > > [ 218.104087] usb 1-5: device descriptor read/64, error -71
> > > [ 218.371010] usb 1-5: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32
> > > [ 218.371019] usb 1-5: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 32
> >
> > That's odd. Can you post a "lsusb -vvv" of the device please?
> >
>
> Sure.
>
> -------------------
>
> Bus 002 Device 009: ID 1784:0006 TopSeed Technology Corp. eHome Infrared Transceiver
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 8
> idVendor 0x1784 TopSeed Technology Corp.
> idProduct 0x0006 eHome Infrared Transceiver
> bcdDevice 1.02
> iManufacturer 1 TopSeed Technology Corp.
> iProduct 2 eHome Infrared Transceiver
> iSerial 3 TS004RrP
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 32
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xa0
> (Bus Powered)
> Remote Wakeup
> MaxPower 100mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 EP 1 OUT
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0020 1x 32 bytes
> bInterval 0
That's wrong indeed. It might be interesting to see if there is anything
in the xhci debug messages with (in Fedora 23):
echo "file xhci*.c +p" > /sys/kernel/debug/dynamic_debug/control
echo "file mceusb.c +p" > /sys/kernel/debug/dynamic_debug/control
And then plug in the receiver, and try to send IR to it with a remote.
You should have quite a few kernel messages in the journal.
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0020 1x 32 bytes
> bInterval 0
> Device Status: 0x0001
> Self Powered
>
> -------------------
>
> Also, here's a link to a response on the lirc list:
>
> https://sourceforge.net/p/lirc/mailman/message/35039126/
That seems suggest that mode2 works but lirc does not. It would be nice
if that could be narrowed down a bit.
Sean
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: mceusb xhci issue?
2016-04-27 20:07 ` Sean Young
@ 2016-05-15 2:29 ` Wade Berrier
2016-05-18 14:52 ` Wade Berrier
0 siblings, 1 reply; 17+ messages in thread
From: Wade Berrier @ 2016-05-15 2:29 UTC (permalink / raw)
To: Sean Young; +Cc: linux-media
On Wed Apr 27 21:07, Sean Young wrote:
> On Mon, Apr 25, 2016 at 09:16:51PM -0600, Wade Berrier wrote:
> > On Apr 25 18:15, Sean Young wrote:
> > > On Sun, Apr 24, 2016 at 10:06:33PM -0600, Wade Berrier wrote:
> > > > Hello,
> > > >
> > > > I have a mceusb compatible transceiver that only seems to work with
> > > > certain computers. I'm testing this on centos7 (3.10.0) and fedora23
> > > > (4.4.7).
> > > >
> > > > The only difference I can see is that the working computer shows
> > > > "using uhci_hcd" and the non working shows "using xhci_hcd".
> > > >
> > > > Here's the dmesg output of the non-working version:
> > > >
> > > > ---------------------
> > > >
> > > > [ 217.951079] usb 1-5: new full-speed USB device number 10 using xhci_hcd
> > > > [ 218.104087] usb 1-5: device descriptor read/64, error -71
> > > > [ 218.371010] usb 1-5: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32
> > > > [ 218.371019] usb 1-5: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 32
> > >
> > > That's odd. Can you post a "lsusb -vvv" of the device please?
> > >
> >
> > Sure.
> >
> > -------------------
> >
> > Bus 002 Device 009: ID 1784:0006 TopSeed Technology Corp. eHome Infrared Transceiver
> > Device Descriptor:
> > bLength 18
> > bDescriptorType 1
> > bcdUSB 2.00
> > bDeviceClass 0
> > bDeviceSubClass 0
> > bDeviceProtocol 0
> > bMaxPacketSize0 8
> > idVendor 0x1784 TopSeed Technology Corp.
> > idProduct 0x0006 eHome Infrared Transceiver
> > bcdDevice 1.02
> > iManufacturer 1 TopSeed Technology Corp.
> > iProduct 2 eHome Infrared Transceiver
> > iSerial 3 TS004RrP
> > bNumConfigurations 1
> > Configuration Descriptor:
> > bLength 9
> > bDescriptorType 2
> > wTotalLength 32
> > bNumInterfaces 1
> > bConfigurationValue 1
> > iConfiguration 0
> > bmAttributes 0xa0
> > (Bus Powered)
> > Remote Wakeup
> > MaxPower 100mA
> > Interface Descriptor:
> > bLength 9
> > bDescriptorType 4
> > bInterfaceNumber 0
> > bAlternateSetting 0
> > bNumEndpoints 2
> > bInterfaceClass 255 Vendor Specific Class
> > bInterfaceSubClass 255 Vendor Specific Subclass
> > bInterfaceProtocol 255 Vendor Specific Protocol
> > iInterface 0
> > Endpoint Descriptor:
> > bLength 7
> > bDescriptorType 5
> > bEndpointAddress 0x01 EP 1 OUT
> > bmAttributes 3
> > Transfer Type Interrupt
> > Synch Type None
> > Usage Type Data
> > wMaxPacketSize 0x0020 1x 32 bytes
> > bInterval 0
>
> That's wrong indeed. It might be interesting to see if there is anything
> in the xhci debug messages with (in Fedora 23):
>
> echo "file xhci*.c +p" > /sys/kernel/debug/dynamic_debug/control
> echo "file mceusb.c +p" > /sys/kernel/debug/dynamic_debug/control
>
> And then plug in the receiver, and try to send IR to it with a remote.
> You should have quite a few kernel messages in the journal.
Here's the output after enabling the debug options, plugging in the
receiver, running lircd, and pressing some remote buttons:
[ 3034.530870] xhci_hcd 0000:00:14.0: // Setting command ring address to 0x79b16001
[ 3034.530903] xhci_hcd 0000:00:14.0: Port Status Change Event for port 5
[ 3034.530906] xhci_hcd 0000:00:14.0: resume root hub
[ 3034.530910] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling.
[ 3034.530918] xhci_hcd 0000:00:14.0: Port Status Change Event for port 10
[ 3034.530921] xhci_hcd 0000:00:14.0: resume root hub
[ 3034.530923] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling.
[ 3034.530928] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
[ 3034.530930] xhci_hcd 0000:00:14.0: Port Status Change Event for port 11
[ 3034.530933] xhci_hcd 0000:00:14.0: resume root hub
[ 3034.530935] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling.
[ 3034.530940] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
[ 3034.530942] xhci_hcd 0000:00:14.0: Port Status Change Event for port 12
[ 3034.530944] xhci_hcd 0000:00:14.0: resume root hub
[ 3034.530946] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling.
[ 3034.530951] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
[ 3034.530953] xhci_hcd 0000:00:14.0: Port Status Change Event for port 13
[ 3034.530956] xhci_hcd 0000:00:14.0: resume root hub
[ 3034.530958] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling.
[ 3034.530962] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
[ 3034.530966] xhci_hcd 0000:00:14.0: xhci_resume: starting port polling.
[ 3034.530971] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
[ 3034.531004] xhci_hcd 0000:00:14.0: get port status, actual port 0 status = 0x2a0
[ 3034.531006] xhci_hcd 0000:00:14.0: Get port status returned 0x100
[ 3034.531016] xhci_hcd 0000:00:14.0: get port status, actual port 1 status = 0x2a0
[ 3034.531018] xhci_hcd 0000:00:14.0: Get port status returned 0x100
[ 3034.531023] xhci_hcd 0000:00:14.0: get port status, actual port 2 status = 0xe63
[ 3034.531025] xhci_hcd 0000:00:14.0: Get port status returned 0x507
[ 3034.531030] xhci_hcd 0000:00:14.0: get port status, actual port 3 status = 0x663
[ 3034.531032] xhci_hcd 0000:00:14.0: Get port status returned 0x107
[ 3034.531037] xhci_hcd 0000:00:14.0: get port status, actual port 4 status = 0x206e1
[ 3034.531039] xhci_hcd 0000:00:14.0: Get port status returned 0x10101
[ 3034.531046] xhci_hcd 0000:00:14.0: clear port connect change, actual port 4 status = 0x6e1
[ 3034.531051] xhci_hcd 0000:00:14.0: get port status, actual port 5 status = 0x2a0
[ 3034.531053] xhci_hcd 0000:00:14.0: Get port status returned 0x100
[ 3034.531058] xhci_hcd 0000:00:14.0: get port status, actual port 6 status = 0x2a0
[ 3034.531060] xhci_hcd 0000:00:14.0: Get port status returned 0x100
[ 3034.531065] xhci_hcd 0000:00:14.0: get port status, actual port 7 status = 0x2a0
[ 3034.531067] xhci_hcd 0000:00:14.0: Get port status returned 0x100
[ 3034.531085] xhci_hcd 0000:00:14.0: get port status, actual port 0 status = 0x2a0
[ 3034.531087] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 3034.531096] xhci_hcd 0000:00:14.0: get port status, actual port 1 status = 0x2a0
[ 3034.531098] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 3034.531106] xhci_hcd 0000:00:14.0: get port status, actual port 2 status = 0x2a0
[ 3034.531108] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 3034.531114] xhci_hcd 0000:00:14.0: get port status, actual port 3 status = 0x2a0
[ 3034.531116] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 3034.531132] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 0 status = 0xe0002a0
[ 3034.531141] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 1 status = 0xe0002a0
[ 3034.531149] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2 status = 0xe0002a0
[ 3034.531158] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 3 status = 0xe0002a0
[ 3034.531176] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
[ 3034.631850] xhci_hcd 0000:00:14.0: get port status, actual port 4 status = 0x6e1
[ 3034.631855] xhci_hcd 0000:00:14.0: Get port status returned 0x101
[ 3034.631874] xhci_hcd 0000:00:14.0: // Ding dong!
[ 3034.631900] xhci_hcd 0000:00:14.0: Slot 5 output ctx = 0x4ac58000 (dma)
[ 3034.631903] xhci_hcd 0000:00:14.0: Slot 5 input ctx = 0x3750b000 (dma)
[ 3034.631910] xhci_hcd 0000:00:14.0: Set slot id 5 dcbaa entry ffff880079b14028 to 0x4ac58000
[ 3034.631922] xhci_hcd 0000:00:14.0: set port reset, actual port 4 status = 0x791
[ 3034.632833] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
[ 3034.682895] xhci_hcd 0000:00:14.0: get port status, actual port 4 status = 0x791
[ 3034.682900] xhci_hcd 0000:00:14.0: Get port status returned 0x111
[ 3034.687099] xhci_hcd 0000:00:14.0: Port Status Change Event for port 5
[ 3034.687108] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling.
[ 3034.733891] xhci_hcd 0000:00:14.0: get port status, actual port 4 status = 0x200603
[ 3034.733896] xhci_hcd 0000:00:14.0: Get port status returned 0x100103
[ 3034.733914] xhci_hcd 0000:00:14.0: clear port reset change, actual port 4 status = 0x603
[ 3034.744862] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
[ 3034.784889] usb 2-5: new full-speed USB device number 6 using xhci_hcd
[ 3034.784898] xhci_hcd 0000:00:14.0: Set root hub portnum to 5
[ 3034.784901] xhci_hcd 0000:00:14.0: Set fake root hub portnum to 5
[ 3034.784904] xhci_hcd 0000:00:14.0: udev->tt = ffff880079acc8a0
[ 3034.784906] xhci_hcd 0000:00:14.0: udev->ttport = 0x5
[ 3034.784908] xhci_hcd 0000:00:14.0: Slot ID 5 Input Context:
[ 3034.784912] xhci_hcd 0000:00:14.0: @ffff88003750b000 (virt) @3750b000 (dma) 0x000000 - drop flags
[ 3034.784914] xhci_hcd 0000:00:14.0: @ffff88003750b004 (virt) @3750b004 (dma) 0x000003 - add flags
[ 3034.784917] xhci_hcd 0000:00:14.0: @ffff88003750b008 (virt) @3750b008 (dma) 0x000000 - rsvd2[0]
[ 3034.784919] xhci_hcd 0000:00:14.0: @ffff88003750b00c (virt) @3750b00c (dma) 0x000000 - rsvd2[1]
[ 3034.784922] xhci_hcd 0000:00:14.0: @ffff88003750b010 (virt) @3750b010 (dma) 0x000000 - rsvd2[2]
[ 3034.784924] xhci_hcd 0000:00:14.0: @ffff88003750b014 (virt) @3750b014 (dma) 0x000000 - rsvd2[3]
[ 3034.784926] xhci_hcd 0000:00:14.0: @ffff88003750b018 (virt) @3750b018 (dma) 0x000000 - rsvd2[4]
[ 3034.784929] xhci_hcd 0000:00:14.0: @ffff88003750b01c (virt) @3750b01c (dma) 0x000000 - rsvd2[5]
[ 3034.784931] xhci_hcd 0000:00:14.0: Slot Context:
[ 3034.784933] xhci_hcd 0000:00:14.0: @ffff88003750b020 (virt) @3750b020 (dma) 0x8100000 - dev_info
[ 3034.784936] xhci_hcd 0000:00:14.0: @ffff88003750b024 (virt) @3750b024 (dma) 0x050000 - dev_info2
[ 3034.784938] xhci_hcd 0000:00:14.0: @ffff88003750b028 (virt) @3750b028 (dma) 0x000000 - tt_info
[ 3034.784940] xhci_hcd 0000:00:14.0: @ffff88003750b02c (virt) @3750b02c (dma) 0x000000 - dev_state
[ 3034.784943] xhci_hcd 0000:00:14.0: @ffff88003750b030 (virt) @3750b030 (dma) 0x000000 - rsvd[0]
[ 3034.784946] xhci_hcd 0000:00:14.0: @ffff88003750b034 (virt) @3750b034 (dma) 0x000000 - rsvd[1]
[ 3034.784948] xhci_hcd 0000:00:14.0: @ffff88003750b038 (virt) @3750b038 (dma) 0x000000 - rsvd[2]
[ 3034.784950] xhci_hcd 0000:00:14.0: @ffff88003750b03c (virt) @3750b03c (dma) 0x000000 - rsvd[3]
[ 3034.784953] xhci_hcd 0000:00:14.0: IN Endpoint 00 Context (ep_index 00):
[ 3034.784956] xhci_hcd 0000:00:14.0: @ffff88003750b040 (virt) @3750b040 (dma) 0x000000 - ep_info
[ 3034.784958] xhci_hcd 0000:00:14.0: @ffff88003750b044 (virt) @3750b044 (dma) 0x400026 - ep_info2
[ 3034.784961] xhci_hcd 0000:00:14.0: @ffff88003750b048 (virt) @3750b048 (dma) 0x377f7001 - deq
[ 3034.784963] xhci_hcd 0000:00:14.0: @ffff88003750b050 (virt) @3750b050 (dma) 0x000000 - tx_info
[ 3034.784966] xhci_hcd 0000:00:14.0: @ffff88003750b054 (virt) @3750b054 (dma) 0x000000 - rsvd[0]
[ 3034.784968] xhci_hcd 0000:00:14.0: @ffff88003750b058 (virt) @3750b058 (dma) 0x000000 - rsvd[1]
[ 3034.784970] xhci_hcd 0000:00:14.0: @ffff88003750b05c (virt) @3750b05c (dma) 0x000000 - rsvd[2]
[ 3034.784973] xhci_hcd 0000:00:14.0: OUT Endpoint 01 Context (ep_index 01):
[ 3034.784975] xhci_hcd 0000:00:14.0: @ffff88003750b060 (virt) @3750b060 (dma) 0x000000 - ep_info
[ 3034.784977] xhci_hcd 0000:00:14.0: @ffff88003750b064 (virt) @3750b064 (dma) 0x000000 - ep_info2
[ 3034.784980] xhci_hcd 0000:00:14.0: @ffff88003750b068 (virt) @3750b068 (dma) 0x000000 - deq
[ 3034.784982] xhci_hcd 0000:00:14.0: @ffff88003750b070 (virt) @3750b070 (dma) 0x000000 - tx_info
[ 3034.784984] xhci_hcd 0000:00:14.0: @ffff88003750b074 (virt) @3750b074 (dma) 0x000000 - rsvd[0]
[ 3034.784987] xhci_hcd 0000:00:14.0: @ffff88003750b078 (virt) @3750b078 (dma) 0x000000 - rsvd[1]
[ 3034.784989] xhci_hcd 0000:00:14.0: @ffff88003750b07c (virt) @3750b07c (dma) 0x000000 - rsvd[2]
[ 3034.784991] xhci_hcd 0000:00:14.0: IN Endpoint 01 Context (ep_index 02):
[ 3034.784994] xhci_hcd 0000:00:14.0: @ffff88003750b080 (virt) @3750b080 (dma) 0x000000 - ep_info
[ 3034.784996] xhci_hcd 0000:00:14.0: @ffff88003750b084 (virt) @3750b084 (dma) 0x000000 - ep_info2
[ 3034.784998] xhci_hcd 0000:00:14.0: @ffff88003750b088 (virt) @3750b088 (dma) 0x000000 - deq
[ 3034.785001] xhci_hcd 0000:00:14.0: @ffff88003750b090 (virt) @3750b090 (dma) 0x000000 - tx_info
[ 3034.785003] xhci_hcd 0000:00:14.0: @ffff88003750b094 (virt) @3750b094 (dma) 0x000000 - rsvd[0]
[ 3034.785005] xhci_hcd 0000:00:14.0: @ffff88003750b098 (virt) @3750b098 (dma) 0x000000 - rsvd[1]
[ 3034.785008] xhci_hcd 0000:00:14.0: @ffff88003750b09c (virt) @3750b09c (dma) 0x000000 - rsvd[2]
[ 3034.785011] xhci_hcd 0000:00:14.0: // Ding dong!
[ 3034.785029] xhci_hcd 0000:00:14.0: Successful setup context command
[ 3034.785032] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x00000079b14000
[ 3034.785035] xhci_hcd 0000:00:14.0: Slot ID 5 dcbaa entry @ffff880079b14028 = 0x0000004ac58000
[ 3034.785037] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x4ac58000
[ 3034.785039] xhci_hcd 0000:00:14.0: Slot ID 5 Input Context:
[ 3034.785042] xhci_hcd 0000:00:14.0: @ffff88003750b000 (virt) @3750b000 (dma) 0x000000 - drop flags
[ 3034.785044] xhci_hcd 0000:00:14.0: @ffff88003750b004 (virt) @3750b004 (dma) 0x000003 - add flags
[ 3034.785047] xhci_hcd 0000:00:14.0: @ffff88003750b008 (virt) @3750b008 (dma) 0x000000 - rsvd2[0]
[ 3034.785049] xhci_hcd 0000:00:14.0: @ffff88003750b00c (virt) @3750b00c (dma) 0x000000 - rsvd2[1]
[ 3034.785051] xhci_hcd 0000:00:14.0: @ffff88003750b010 (virt) @3750b010 (dma) 0x000000 - rsvd2[2]
[ 3034.785054] xhci_hcd 0000:00:14.0: @ffff88003750b014 (virt) @3750b014 (dma) 0x000000 - rsvd2[3]
[ 3034.785056] xhci_hcd 0000:00:14.0: @ffff88003750b018 (virt) @3750b018 (dma) 0x000000 - rsvd2[4]
[ 3034.785058] xhci_hcd 0000:00:14.0: @ffff88003750b01c (virt) @3750b01c (dma) 0x000000 - rsvd2[5]
[ 3034.785060] xhci_hcd 0000:00:14.0: Slot Context:
[ 3034.785063] xhci_hcd 0000:00:14.0: @ffff88003750b020 (virt) @3750b020 (dma) 0x8100000 - dev_info
[ 3034.785065] xhci_hcd 0000:00:14.0: @ffff88003750b024 (virt) @3750b024 (dma) 0x050000 - dev_info2
[ 3034.785067] xhci_hcd 0000:00:14.0: @ffff88003750b028 (virt) @3750b028 (dma) 0x000000 - tt_info
[ 3034.785070] xhci_hcd 0000:00:14.0: @ffff88003750b02c (virt) @3750b02c (dma) 0x000000 - dev_state
[ 3034.785072] xhci_hcd 0000:00:14.0: @ffff88003750b030 (virt) @3750b030 (dma) 0x000000 - rsvd[0]
[ 3034.785074] xhci_hcd 0000:00:14.0: @ffff88003750b034 (virt) @3750b034 (dma) 0x000000 - rsvd[1]
[ 3034.785077] xhci_hcd 0000:00:14.0: @ffff88003750b038 (virt) @3750b038 (dma) 0x000000 - rsvd[2]
[ 3034.785079] xhci_hcd 0000:00:14.0: @ffff88003750b03c (virt) @3750b03c (dma) 0x000000 - rsvd[3]
[ 3034.785081] xhci_hcd 0000:00:14.0: IN Endpoint 00 Context (ep_index 00):
[ 3034.785083] xhci_hcd 0000:00:14.0: @ffff88003750b040 (virt) @3750b040 (dma) 0x000000 - ep_info
[ 3034.785086] xhci_hcd 0000:00:14.0: @ffff88003750b044 (virt) @3750b044 (dma) 0x400026 - ep_info2
[ 3034.785088] xhci_hcd 0000:00:14.0: @ffff88003750b048 (virt) @3750b048 (dma) 0x377f7001 - deq
[ 3034.785090] xhci_hcd 0000:00:14.0: @ffff88003750b050 (virt) @3750b050 (dma) 0x000000 - tx_info
[ 3034.785093] xhci_hcd 0000:00:14.0: @ffff88003750b054 (virt) @3750b054 (dma) 0x000000 - rsvd[0]
[ 3034.785095] xhci_hcd 0000:00:14.0: @ffff88003750b058 (virt) @3750b058 (dma) 0x000000 - rsvd[1]
[ 3034.785097] xhci_hcd 0000:00:14.0: @ffff88003750b05c (virt) @3750b05c (dma) 0x000000 - rsvd[2]
[ 3034.785100] xhci_hcd 0000:00:14.0: OUT Endpoint 01 Context (ep_index 01):
[ 3034.785102] xhci_hcd 0000:00:14.0: @ffff88003750b060 (virt) @3750b060 (dma) 0x000000 - ep_info
[ 3034.785104] xhci_hcd 0000:00:14.0: @ffff88003750b064 (virt) @3750b064 (dma) 0x000000 - ep_info2
[ 3034.785106] xhci_hcd 0000:00:14.0: @ffff88003750b068 (virt) @3750b068 (dma) 0x000000 - deq
[ 3034.785109] xhci_hcd 0000:00:14.0: @ffff88003750b070 (virt) @3750b070 (dma) 0x000000 - tx_info
[ 3034.785111] xhci_hcd 0000:00:14.0: @ffff88003750b074 (virt) @3750b074 (dma) 0x000000 - rsvd[0]
[ 3034.785113] xhci_hcd 0000:00:14.0: @ffff88003750b078 (virt) @3750b078 (dma) 0x000000 - rsvd[1]
[ 3034.785116] xhci_hcd 0000:00:14.0: @ffff88003750b07c (virt) @3750b07c (dma) 0x000000 - rsvd[2]
[ 3034.785118] xhci_hcd 0000:00:14.0: IN Endpoint 01 Context (ep_index 02):
[ 3034.785120] xhci_hcd 0000:00:14.0: @ffff88003750b080 (virt) @3750b080 (dma) 0x000000 - ep_info
[ 3034.785122] xhci_hcd 0000:00:14.0: @ffff88003750b084 (virt) @3750b084 (dma) 0x000000 - ep_info2
[ 3034.785125] xhci_hcd 0000:00:14.0: @ffff88003750b088 (virt) @3750b088 (dma) 0x000000 - deq
[ 3034.785127] xhci_hcd 0000:00:14.0: @ffff88003750b090 (virt) @3750b090 (dma) 0x000000 - tx_info
[ 3034.785129] xhci_hcd 0000:00:14.0: @ffff88003750b094 (virt) @3750b094 (dma) 0x000000 - rsvd[0]
[ 3034.785132] xhci_hcd 0000:00:14.0: @ffff88003750b098 (virt) @3750b098 (dma) 0x000000 - rsvd[1]
[ 3034.785134] xhci_hcd 0000:00:14.0: @ffff88003750b09c (virt) @3750b09c (dma) 0x000000 - rsvd[2]
[ 3034.785136] xhci_hcd 0000:00:14.0: Slot ID 5 Output Context:
[ 3034.785138] xhci_hcd 0000:00:14.0: Slot Context:
[ 3034.785140] xhci_hcd 0000:00:14.0: @ffff88004ac58000 (virt) @4ac58000 (dma) 0x8100000 - dev_info
[ 3034.785143] xhci_hcd 0000:00:14.0: @ffff88004ac58004 (virt) @4ac58004 (dma) 0x050000 - dev_info2
[ 3034.785145] xhci_hcd 0000:00:14.0: @ffff88004ac58008 (virt) @4ac58008 (dma) 0x000000 - tt_info
[ 3034.785147] xhci_hcd 0000:00:14.0: @ffff88004ac5800c (virt) @4ac5800c (dma) 0x8000000 - dev_state
[ 3034.785150] xhci_hcd 0000:00:14.0: @ffff88004ac58010 (virt) @4ac58010 (dma) 0x000000 - rsvd[0]
[ 3034.785152] xhci_hcd 0000:00:14.0: @ffff88004ac58014 (virt) @4ac58014 (dma) 0x000000 - rsvd[1]
[ 3034.785154] xhci_hcd 0000:00:14.0: @ffff88004ac58018 (virt) @4ac58018 (dma) 0x000000 - rsvd[2]
[ 3034.785157] xhci_hcd 0000:00:14.0: @ffff88004ac5801c (virt) @4ac5801c (dma) 0x000000 - rsvd[3]
[ 3034.785159] xhci_hcd 0000:00:14.0: IN Endpoint 00 Context (ep_index 00):
[ 3034.785161] xhci_hcd 0000:00:14.0: @ffff88004ac58020 (virt) @4ac58020 (dma) 0x000001 - ep_info
[ 3034.785163] xhci_hcd 0000:00:14.0: @ffff88004ac58024 (virt) @4ac58024 (dma) 0x400026 - ep_info2
[ 3034.785166] xhci_hcd 0000:00:14.0: @ffff88004ac58028 (virt) @4ac58028 (dma) 0x377f7001 - deq
[ 3034.785168] xhci_hcd 0000:00:14.0: @ffff88004ac58030 (virt) @4ac58030 (dma) 0x000000 - tx_info
[ 3034.785170] xhci_hcd 0000:00:14.0: @ffff88004ac58034 (virt) @4ac58034 (dma) 0x000000 - rsvd[0]
[ 3034.785173] xhci_hcd 0000:00:14.0: @ffff88004ac58038 (virt) @4ac58038 (dma) 0x000000 - rsvd[1]
[ 3034.785175] xhci_hcd 0000:00:14.0: @ffff88004ac5803c (virt) @4ac5803c (dma) 0x000000 - rsvd[2]
[ 3034.785177] xhci_hcd 0000:00:14.0: OUT Endpoint 01 Context (ep_index 01):
[ 3034.785179] xhci_hcd 0000:00:14.0: @ffff88004ac58040 (virt) @4ac58040 (dma) 0x000000 - ep_info
[ 3034.785182] xhci_hcd 0000:00:14.0: @ffff88004ac58044 (virt) @4ac58044 (dma) 0x000000 - ep_info2
[ 3034.785184] xhci_hcd 0000:00:14.0: @ffff88004ac58048 (virt) @4ac58048 (dma) 0x000000 - deq
[ 3034.785186] xhci_hcd 0000:00:14.0: @ffff88004ac58050 (virt) @4ac58050 (dma) 0x000000 - tx_info
[ 3034.785189] xhci_hcd 0000:00:14.0: @ffff88004ac58054 (virt) @4ac58054 (dma) 0x000000 - rsvd[0]
[ 3034.785191] xhci_hcd 0000:00:14.0: @ffff88004ac58058 (virt) @4ac58058 (dma) 0x000000 - rsvd[1]
[ 3034.785193] xhci_hcd 0000:00:14.0: @ffff88004ac5805c (virt) @4ac5805c (dma) 0x000000 - rsvd[2]
[ 3034.785196] xhci_hcd 0000:00:14.0: IN Endpoint 01 Context (ep_index 02):
[ 3034.785198] xhci_hcd 0000:00:14.0: @ffff88004ac58060 (virt) @4ac58060 (dma) 0x000000 - ep_info
[ 3034.785200] xhci_hcd 0000:00:14.0: @ffff88004ac58064 (virt) @4ac58064 (dma) 0x000000 - ep_info2
[ 3034.785202] xhci_hcd 0000:00:14.0: @ffff88004ac58068 (virt) @4ac58068 (dma) 0x000000 - deq
[ 3034.785205] xhci_hcd 0000:00:14.0: @ffff88004ac58070 (virt) @4ac58070 (dma) 0x000000 - tx_info
[ 3034.785207] xhci_hcd 0000:00:14.0: @ffff88004ac58074 (virt) @4ac58074 (dma) 0x000000 - rsvd[0]
[ 3034.785209] xhci_hcd 0000:00:14.0: @ffff88004ac58078 (virt) @4ac58078 (dma) 0x000000 - rsvd[1]
[ 3034.785212] xhci_hcd 0000:00:14.0: @ffff88004ac5807c (virt) @4ac5807c (dma) 0x000000 - rsvd[2]
[ 3034.785214] xhci_hcd 0000:00:14.0: Internal device address = 0
[ 3034.785387] xhci_hcd 0000:00:14.0: Waiting for status stage event
[ 3034.785404] xhci_hcd 0000:00:14.0: set port reset, actual port 4 status = 0x791
[ 3034.835888] xhci_hcd 0000:00:14.0: get port status, actual port 4 status = 0x791
[ 3034.835894] xhci_hcd 0000:00:14.0: Get port status returned 0x111
[ 3034.840611] xhci_hcd 0000:00:14.0: Port Status Change Event for port 5
[ 3034.840619] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling.
[ 3034.886884] xhci_hcd 0000:00:14.0: get port status, actual port 4 status = 0x200603
[ 3034.886889] xhci_hcd 0000:00:14.0: Get port status returned 0x100103
[ 3034.886909] xhci_hcd 0000:00:14.0: clear port reset change, actual port 4 status = 0x603
[ 3034.937880] xhci_hcd 0000:00:14.0: Resetting device with slot ID 5
[ 3034.937888] xhci_hcd 0000:00:14.0: // Ding dong!
[ 3034.937897] xhci_hcd 0000:00:14.0: Completed reset device command.
[ 3034.937905] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 5) in default state
[ 3034.937907] xhci_hcd 0000:00:14.0: Not freeing device rings.
[ 3034.937913] xhci_hcd 0000:00:14.0: Slot ID 5 Input Context:
[ 3034.937917] xhci_hcd 0000:00:14.0: @ffff88003750b000 (virt) @3750b000 (dma) 0x000000 - drop flags
[ 3034.937920] xhci_hcd 0000:00:14.0: @ffff88003750b004 (virt) @3750b004 (dma) 0x000003 - add flags
[ 3034.937922] xhci_hcd 0000:00:14.0: @ffff88003750b008 (virt) @3750b008 (dma) 0x000000 - rsvd2[0]
[ 3034.937925] xhci_hcd 0000:00:14.0: @ffff88003750b00c (virt) @3750b00c (dma) 0x000000 - rsvd2[1]
[ 3034.937927] xhci_hcd 0000:00:14.0: @ffff88003750b010 (virt) @3750b010 (dma) 0x000000 - rsvd2[2]
[ 3034.937930] xhci_hcd 0000:00:14.0: @ffff88003750b014 (virt) @3750b014 (dma) 0x000000 - rsvd2[3]
[ 3034.937932] xhci_hcd 0000:00:14.0: @ffff88003750b018 (virt) @3750b018 (dma) 0x000000 - rsvd2[4]
[ 3034.937934] xhci_hcd 0000:00:14.0: @ffff88003750b01c (virt) @3750b01c (dma) 0x000000 - rsvd2[5]
[ 3034.937936] xhci_hcd 0000:00:14.0: Slot Context:
[ 3034.937939] xhci_hcd 0000:00:14.0: @ffff88003750b020 (virt) @3750b020 (dma) 0x8100000 - dev_info
[ 3034.937941] xhci_hcd 0000:00:14.0: @ffff88003750b024 (virt) @3750b024 (dma) 0x050000 - dev_info2
[ 3034.937944] xhci_hcd 0000:00:14.0: @ffff88003750b028 (virt) @3750b028 (dma) 0x000000 - tt_info
[ 3034.937946] xhci_hcd 0000:00:14.0: @ffff88003750b02c (virt) @3750b02c (dma) 0x000000 - dev_state
[ 3034.937949] xhci_hcd 0000:00:14.0: @ffff88003750b030 (virt) @3750b030 (dma) 0x000000 - rsvd[0]
[ 3034.937951] xhci_hcd 0000:00:14.0: @ffff88003750b034 (virt) @3750b034 (dma) 0x000000 - rsvd[1]
[ 3034.937954] xhci_hcd 0000:00:14.0: @ffff88003750b038 (virt) @3750b038 (dma) 0x000000 - rsvd[2]
[ 3034.937956] xhci_hcd 0000:00:14.0: @ffff88003750b03c (virt) @3750b03c (dma) 0x000000 - rsvd[3]
[ 3034.937959] xhci_hcd 0000:00:14.0: IN Endpoint 00 Context (ep_index 00):
[ 3034.937961] xhci_hcd 0000:00:14.0: @ffff88003750b040 (virt) @3750b040 (dma) 0x000000 - ep_info
[ 3034.937964] xhci_hcd 0000:00:14.0: @ffff88003750b044 (virt) @3750b044 (dma) 0x400026 - ep_info2
[ 3034.937966] xhci_hcd 0000:00:14.0: @ffff88003750b048 (virt) @3750b048 (dma) 0x377f7031 - deq
[ 3034.937969] xhci_hcd 0000:00:14.0: @ffff88003750b050 (virt) @3750b050 (dma) 0x000000 - tx_info
[ 3034.937971] xhci_hcd 0000:00:14.0: @ffff88003750b054 (virt) @3750b054 (dma) 0x000000 - rsvd[0]
[ 3034.937974] xhci_hcd 0000:00:14.0: @ffff88003750b058 (virt) @3750b058 (dma) 0x000000 - rsvd[1]
[ 3034.937976] xhci_hcd 0000:00:14.0: @ffff88003750b05c (virt) @3750b05c (dma) 0x000000 - rsvd[2]
[ 3034.937978] xhci_hcd 0000:00:14.0: OUT Endpoint 01 Context (ep_index 01):
[ 3034.937981] xhci_hcd 0000:00:14.0: @ffff88003750b060 (virt) @3750b060 (dma) 0x000000 - ep_info
[ 3034.937983] xhci_hcd 0000:00:14.0: @ffff88003750b064 (virt) @3750b064 (dma) 0x000000 - ep_info2
[ 3034.937985] xhci_hcd 0000:00:14.0: @ffff88003750b068 (virt) @3750b068 (dma) 0x000000 - deq
[ 3034.937988] xhci_hcd 0000:00:14.0: @ffff88003750b070 (virt) @3750b070 (dma) 0x000000 - tx_info
[ 3034.937990] xhci_hcd 0000:00:14.0: @ffff88003750b074 (virt) @3750b074 (dma) 0x000000 - rsvd[0]
[ 3034.937992] xhci_hcd 0000:00:14.0: @ffff88003750b078 (virt) @3750b078 (dma) 0x000000 - rsvd[1]
[ 3034.937995] xhci_hcd 0000:00:14.0: @ffff88003750b07c (virt) @3750b07c (dma) 0x000000 - rsvd[2]
[ 3034.937997] xhci_hcd 0000:00:14.0: IN Endpoint 01 Context (ep_index 02):
[ 3034.937999] xhci_hcd 0000:00:14.0: @ffff88003750b080 (virt) @3750b080 (dma) 0x000000 - ep_info
[ 3034.938002] xhci_hcd 0000:00:14.0: @ffff88003750b084 (virt) @3750b084 (dma) 0x000000 - ep_info2
[ 3034.938004] xhci_hcd 0000:00:14.0: @ffff88003750b088 (virt) @3750b088 (dma) 0x000000 - deq
[ 3034.938006] xhci_hcd 0000:00:14.0: @ffff88003750b090 (virt) @3750b090 (dma) 0x000000 - tx_info
[ 3034.938008] xhci_hcd 0000:00:14.0: @ffff88003750b094 (virt) @3750b094 (dma) 0x000000 - rsvd[0]
[ 3034.938011] xhci_hcd 0000:00:14.0: @ffff88003750b098 (virt) @3750b098 (dma) 0x000000 - rsvd[1]
[ 3034.938013] xhci_hcd 0000:00:14.0: @ffff88003750b09c (virt) @3750b09c (dma) 0x000000 - rsvd[2]
[ 3034.938016] xhci_hcd 0000:00:14.0: // Ding dong!
[ 3034.938195] xhci_hcd 0000:00:14.0: Successful setup address command
[ 3034.938202] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x00000079b14000
[ 3034.938206] xhci_hcd 0000:00:14.0: Slot ID 5 dcbaa entry @ffff880079b14028 = 0x0000004ac58000
[ 3034.938209] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x4ac58000
[ 3034.938212] xhci_hcd 0000:00:14.0: Slot ID 5 Input Context:
[ 3034.938215] xhci_hcd 0000:00:14.0: @ffff88003750b000 (virt) @3750b000 (dma) 0x000000 - drop flags
[ 3034.938218] xhci_hcd 0000:00:14.0: @ffff88003750b004 (virt) @3750b004 (dma) 0x000003 - add flags
[ 3034.938220] xhci_hcd 0000:00:14.0: @ffff88003750b008 (virt) @3750b008 (dma) 0x000000 - rsvd2[0]
[ 3034.938223] xhci_hcd 0000:00:14.0: @ffff88003750b00c (virt) @3750b00c (dma) 0x000000 - rsvd2[1]
[ 3034.938225] xhci_hcd 0000:00:14.0: @ffff88003750b010 (virt) @3750b010 (dma) 0x000000 - rsvd2[2]
[ 3034.938228] xhci_hcd 0000:00:14.0: @ffff88003750b014 (virt) @3750b014 (dma) 0x000000 - rsvd2[3]
[ 3034.938230] xhci_hcd 0000:00:14.0: @ffff88003750b018 (virt) @3750b018 (dma) 0x000000 - rsvd2[4]
[ 3034.938232] xhci_hcd 0000:00:14.0: @ffff88003750b01c (virt) @3750b01c (dma) 0x000000 - rsvd2[5]
[ 3034.938234] xhci_hcd 0000:00:14.0: Slot Context:
[ 3034.938237] xhci_hcd 0000:00:14.0: @ffff88003750b020 (virt) @3750b020 (dma) 0x8100000 - dev_info
[ 3034.938239] xhci_hcd 0000:00:14.0: @ffff88003750b024 (virt) @3750b024 (dma) 0x050000 - dev_info2
[ 3034.938242] xhci_hcd 0000:00:14.0: @ffff88003750b028 (virt) @3750b028 (dma) 0x000000 - tt_info
[ 3034.938244] xhci_hcd 0000:00:14.0: @ffff88003750b02c (virt) @3750b02c (dma) 0x000000 - dev_state
[ 3034.938247] xhci_hcd 0000:00:14.0: @ffff88003750b030 (virt) @3750b030 (dma) 0x000000 - rsvd[0]
[ 3034.938249] xhci_hcd 0000:00:14.0: @ffff88003750b034 (virt) @3750b034 (dma) 0x000000 - rsvd[1]
[ 3034.938252] xhci_hcd 0000:00:14.0: @ffff88003750b038 (virt) @3750b038 (dma) 0x000000 - rsvd[2]
[ 3034.938254] xhci_hcd 0000:00:14.0: @ffff88003750b03c (virt) @3750b03c (dma) 0x000000 - rsvd[3]
[ 3034.938257] xhci_hcd 0000:00:14.0: IN Endpoint 00 Context (ep_index 00):
[ 3034.938259] xhci_hcd 0000:00:14.0: @ffff88003750b040 (virt) @3750b040 (dma) 0x000000 - ep_info
[ 3034.938262] xhci_hcd 0000:00:14.0: @ffff88003750b044 (virt) @3750b044 (dma) 0x400026 - ep_info2
[ 3034.938264] xhci_hcd 0000:00:14.0: @ffff88003750b048 (virt) @3750b048 (dma) 0x377f7031 - deq
[ 3034.938267] xhci_hcd 0000:00:14.0: @ffff88003750b050 (virt) @3750b050 (dma) 0x000000 - tx_info
[ 3034.938269] xhci_hcd 0000:00:14.0: @ffff88003750b054 (virt) @3750b054 (dma) 0x000000 - rsvd[0]
[ 3034.938272] xhci_hcd 0000:00:14.0: @ffff88003750b058 (virt) @3750b058 (dma) 0x000000 - rsvd[1]
[ 3034.938274] xhci_hcd 0000:00:14.0: @ffff88003750b05c (virt) @3750b05c (dma) 0x000000 - rsvd[2]
[ 3034.938276] xhci_hcd 0000:00:14.0: OUT Endpoint 01 Context (ep_index 01):
[ 3034.938279] xhci_hcd 0000:00:14.0: @ffff88003750b060 (virt) @3750b060 (dma) 0x000000 - ep_info
[ 3034.938281] xhci_hcd 0000:00:14.0: @ffff88003750b064 (virt) @3750b064 (dma) 0x000000 - ep_info2
[ 3034.938283] xhci_hcd 0000:00:14.0: @ffff88003750b068 (virt) @3750b068 (dma) 0x000000 - deq
[ 3034.938286] xhci_hcd 0000:00:14.0: @ffff88003750b070 (virt) @3750b070 (dma) 0x000000 - tx_info
[ 3034.938288] xhci_hcd 0000:00:14.0: @ffff88003750b074 (virt) @3750b074 (dma) 0x000000 - rsvd[0]
[ 3034.938290] xhci_hcd 0000:00:14.0: @ffff88003750b078 (virt) @3750b078 (dma) 0x000000 - rsvd[1]
[ 3034.938293] xhci_hcd 0000:00:14.0: @ffff88003750b07c (virt) @3750b07c (dma) 0x000000 - rsvd[2]
[ 3034.938295] xhci_hcd 0000:00:14.0: IN Endpoint 01 Context (ep_index 02):
[ 3034.938297] xhci_hcd 0000:00:14.0: @ffff88003750b080 (virt) @3750b080 (dma) 0x000000 - ep_info
[ 3034.938299] xhci_hcd 0000:00:14.0: @ffff88003750b084 (virt) @3750b084 (dma) 0x000000 - ep_info2
[ 3034.938302] xhci_hcd 0000:00:14.0: @ffff88003750b088 (virt) @3750b088 (dma) 0x000000 - deq
[ 3034.938304] xhci_hcd 0000:00:14.0: @ffff88003750b090 (virt) @3750b090 (dma) 0x000000 - tx_info
[ 3034.938306] xhci_hcd 0000:00:14.0: @ffff88003750b094 (virt) @3750b094 (dma) 0x000000 - rsvd[0]
[ 3034.938309] xhci_hcd 0000:00:14.0: @ffff88003750b098 (virt) @3750b098 (dma) 0x000000 - rsvd[1]
[ 3034.938311] xhci_hcd 0000:00:14.0: @ffff88003750b09c (virt) @3750b09c (dma) 0x000000 - rsvd[2]
[ 3034.938313] xhci_hcd 0000:00:14.0: Slot ID 5 Output Context:
[ 3034.938315] xhci_hcd 0000:00:14.0: Slot Context:
[ 3034.938318] xhci_hcd 0000:00:14.0: @ffff88004ac58000 (virt) @4ac58000 (dma) 0x8100000 - dev_info
[ 3034.938320] xhci_hcd 0000:00:14.0: @ffff88004ac58004 (virt) @4ac58004 (dma) 0x050000 - dev_info2
[ 3034.938322] xhci_hcd 0000:00:14.0: @ffff88004ac58008 (virt) @4ac58008 (dma) 0x000000 - tt_info
[ 3034.938324] xhci_hcd 0000:00:14.0: @ffff88004ac5800c (virt) @4ac5800c (dma) 0x10000005 - dev_state
[ 3034.938327] xhci_hcd 0000:00:14.0: @ffff88004ac58010 (virt) @4ac58010 (dma) 0x000000 - rsvd[0]
[ 3034.938329] xhci_hcd 0000:00:14.0: @ffff88004ac58014 (virt) @4ac58014 (dma) 0x000000 - rsvd[1]
[ 3034.938332] xhci_hcd 0000:00:14.0: @ffff88004ac58018 (virt) @4ac58018 (dma) 0x000000 - rsvd[2]
[ 3034.938334] xhci_hcd 0000:00:14.0: @ffff88004ac5801c (virt) @4ac5801c (dma) 0x000000 - rsvd[3]
[ 3034.938336] xhci_hcd 0000:00:14.0: IN Endpoint 00 Context (ep_index 00):
[ 3034.938338] xhci_hcd 0000:00:14.0: @ffff88004ac58020 (virt) @4ac58020 (dma) 0x000001 - ep_info
[ 3034.938341] xhci_hcd 0000:00:14.0: @ffff88004ac58024 (virt) @4ac58024 (dma) 0x400026 - ep_info2
[ 3034.938343] xhci_hcd 0000:00:14.0: @ffff88004ac58028 (virt) @4ac58028 (dma) 0x377f7031 - deq
[ 3034.938345] xhci_hcd 0000:00:14.0: @ffff88004ac58030 (virt) @4ac58030 (dma) 0x000000 - tx_info
[ 3034.938348] xhci_hcd 0000:00:14.0: @ffff88004ac58034 (virt) @4ac58034 (dma) 0x000000 - rsvd[0]
[ 3034.938350] xhci_hcd 0000:00:14.0: @ffff88004ac58038 (virt) @4ac58038 (dma) 0x000000 - rsvd[1]
[ 3034.938352] xhci_hcd 0000:00:14.0: @ffff88004ac5803c (virt) @4ac5803c (dma) 0x000000 - rsvd[2]
[ 3034.938354] xhci_hcd 0000:00:14.0: OUT Endpoint 01 Context (ep_index 01):
[ 3034.938357] xhci_hcd 0000:00:14.0: @ffff88004ac58040 (virt) @4ac58040 (dma) 0x000000 - ep_info
[ 3034.938359] xhci_hcd 0000:00:14.0: @ffff88004ac58044 (virt) @4ac58044 (dma) 0x000000 - ep_info2
[ 3034.938361] xhci_hcd 0000:00:14.0: @ffff88004ac58048 (virt) @4ac58048 (dma) 0x000000 - deq
[ 3034.938364] xhci_hcd 0000:00:14.0: @ffff88004ac58050 (virt) @4ac58050 (dma) 0x000000 - tx_info
[ 3034.938366] xhci_hcd 0000:00:14.0: @ffff88004ac58054 (virt) @4ac58054 (dma) 0x000000 - rsvd[0]
[ 3034.938368] xhci_hcd 0000:00:14.0: @ffff88004ac58058 (virt) @4ac58058 (dma) 0x000000 - rsvd[1]
[ 3034.938371] xhci_hcd 0000:00:14.0: @ffff88004ac5805c (virt) @4ac5805c (dma) 0x000000 - rsvd[2]
[ 3034.938373] xhci_hcd 0000:00:14.0: IN Endpoint 01 Context (ep_index 02):
[ 3034.938375] xhci_hcd 0000:00:14.0: @ffff88004ac58060 (virt) @4ac58060 (dma) 0x000000 - ep_info
[ 3034.938377] xhci_hcd 0000:00:14.0: @ffff88004ac58064 (virt) @4ac58064 (dma) 0x000000 - ep_info2
[ 3034.938380] xhci_hcd 0000:00:14.0: @ffff88004ac58068 (virt) @4ac58068 (dma) 0x000000 - deq
[ 3034.938382] xhci_hcd 0000:00:14.0: @ffff88004ac58070 (virt) @4ac58070 (dma) 0x000000 - tx_info
[ 3034.938384] xhci_hcd 0000:00:14.0: @ffff88004ac58074 (virt) @4ac58074 (dma) 0x000000 - rsvd[0]
[ 3034.938387] xhci_hcd 0000:00:14.0: @ffff88004ac58078 (virt) @4ac58078 (dma) 0x000000 - rsvd[1]
[ 3034.938389] xhci_hcd 0000:00:14.0: @ffff88004ac5807c (virt) @4ac5807c (dma) 0x000000 - rsvd[2]
[ 3034.938391] xhci_hcd 0000:00:14.0: Internal device address = 5
[ 3034.938396] xhci_hcd 0000:00:14.0: Endpoint 0x0 ep reset callback called
[ 3034.948809] xhci_hcd 0000:00:14.0: Endpoint 0x0 ep reset callback called
[ 3034.948818] xhci_hcd 0000:00:14.0: Max Packet Size for ep 0 changed.
[ 3034.948820] xhci_hcd 0000:00:14.0: Max packet size in usb_device = 8
[ 3034.948823] xhci_hcd 0000:00:14.0: Max packet size in xHCI HW = 64
[ 3034.948825] xhci_hcd 0000:00:14.0: Issuing evaluate context command.
[ 3034.948828] xhci_hcd 0000:00:14.0: Slot 5 input context
[ 3034.948831] xhci_hcd 0000:00:14.0: @ffff88003750b000 (virt) @3750b000 (dma) 0x000000 - drop flags
[ 3034.948834] xhci_hcd 0000:00:14.0: @ffff88003750b004 (virt) @3750b004 (dma) 0x000002 - add flags
[ 3034.948836] xhci_hcd 0000:00:14.0: @ffff88003750b008 (virt) @3750b008 (dma) 0x000000 - rsvd2[0]
[ 3034.948839] xhci_hcd 0000:00:14.0: @ffff88003750b00c (virt) @3750b00c (dma) 0x000000 - rsvd2[1]
[ 3034.948841] xhci_hcd 0000:00:14.0: @ffff88003750b010 (virt) @3750b010 (dma) 0x000000 - rsvd2[2]
[ 3034.948843] xhci_hcd 0000:00:14.0: @ffff88003750b014 (virt) @3750b014 (dma) 0x000000 - rsvd2[3]
[ 3034.948846] xhci_hcd 0000:00:14.0: @ffff88003750b018 (virt) @3750b018 (dma) 0x000000 - rsvd2[4]
[ 3034.948848] xhci_hcd 0000:00:14.0: @ffff88003750b01c (virt) @3750b01c (dma) 0x000000 - rsvd2[5]
[ 3034.948850] xhci_hcd 0000:00:14.0: Slot Context:
[ 3034.948853] xhci_hcd 0000:00:14.0: @ffff88003750b020 (virt) @3750b020 (dma) 0x8100000 - dev_info
[ 3034.948855] xhci_hcd 0000:00:14.0: @ffff88003750b024 (virt) @3750b024 (dma) 0x050000 - dev_info2
[ 3034.948857] xhci_hcd 0000:00:14.0: @ffff88003750b028 (virt) @3750b028 (dma) 0x000000 - tt_info
[ 3034.948859] xhci_hcd 0000:00:14.0: @ffff88003750b02c (virt) @3750b02c (dma) 0x000000 - dev_state
[ 3034.948862] xhci_hcd 0000:00:14.0: @ffff88003750b030 (virt) @3750b030 (dma) 0x000000 - rsvd[0]
[ 3034.948864] xhci_hcd 0000:00:14.0: @ffff88003750b034 (virt) @3750b034 (dma) 0x000000 - rsvd[1]
[ 3034.948867] xhci_hcd 0000:00:14.0: @ffff88003750b038 (virt) @3750b038 (dma) 0x000000 - rsvd[2]
[ 3034.948869] xhci_hcd 0000:00:14.0: @ffff88003750b03c (virt) @3750b03c (dma) 0x000000 - rsvd[3]
[ 3034.948872] xhci_hcd 0000:00:14.0: IN Endpoint 00 Context (ep_index 00):
[ 3034.948874] xhci_hcd 0000:00:14.0: @ffff88003750b040 (virt) @3750b040 (dma) 0x000001 - ep_info
[ 3034.948877] xhci_hcd 0000:00:14.0: @ffff88003750b044 (virt) @3750b044 (dma) 0x080026 - ep_info2
[ 3034.948879] xhci_hcd 0000:00:14.0: @ffff88003750b048 (virt) @3750b048 (dma) 0x377f7031 - deq
[ 3034.948882] xhci_hcd 0000:00:14.0: @ffff88003750b050 (virt) @3750b050 (dma) 0x000000 - tx_info
[ 3034.948884] xhci_hcd 0000:00:14.0: @ffff88003750b054 (virt) @3750b054 (dma) 0x000000 - rsvd[0]
[ 3034.948886] xhci_hcd 0000:00:14.0: @ffff88003750b058 (virt) @3750b058 (dma) 0x000000 - rsvd[1]
[ 3034.948888] xhci_hcd 0000:00:14.0: @ffff88003750b05c (virt) @3750b05c (dma) 0x000000 - rsvd[2]
[ 3034.948891] xhci_hcd 0000:00:14.0: Slot 5 output context
[ 3034.948893] xhci_hcd 0000:00:14.0: Slot Context:
[ 3034.948895] xhci_hcd 0000:00:14.0: @ffff88004ac58000 (virt) @4ac58000 (dma) 0x8100000 - dev_info
[ 3034.948897] xhci_hcd 0000:00:14.0: @ffff88004ac58004 (virt) @4ac58004 (dma) 0x050000 - dev_info2
[ 3034.948900] xhci_hcd 0000:00:14.0: @ffff88004ac58008 (virt) @4ac58008 (dma) 0x000000 - tt_info
[ 3034.948902] xhci_hcd 0000:00:14.0: @ffff88004ac5800c (virt) @4ac5800c (dma) 0x10000005 - dev_state
[ 3034.948904] xhci_hcd 0000:00:14.0: @ffff88004ac58010 (virt) @4ac58010 (dma) 0x000000 - rsvd[0]
[ 3034.948907] xhci_hcd 0000:00:14.0: @ffff88004ac58014 (virt) @4ac58014 (dma) 0x000000 - rsvd[1]
[ 3034.948909] xhci_hcd 0000:00:14.0: @ffff88004ac58018 (virt) @4ac58018 (dma) 0x000000 - rsvd[2]
[ 3034.948911] xhci_hcd 0000:00:14.0: @ffff88004ac5801c (virt) @4ac5801c (dma) 0x000000 - rsvd[3]
[ 3034.948913] xhci_hcd 0000:00:14.0: IN Endpoint 00 Context (ep_index 00):
[ 3034.948916] xhci_hcd 0000:00:14.0: @ffff88004ac58020 (virt) @4ac58020 (dma) 0x000001 - ep_info
[ 3034.948918] xhci_hcd 0000:00:14.0: @ffff88004ac58024 (virt) @4ac58024 (dma) 0x400026 - ep_info2
[ 3034.948920] xhci_hcd 0000:00:14.0: @ffff88004ac58028 (virt) @4ac58028 (dma) 0x377f7031 - deq
[ 3034.948923] xhci_hcd 0000:00:14.0: @ffff88004ac58030 (virt) @4ac58030 (dma) 0x000000 - tx_info
[ 3034.948925] xhci_hcd 0000:00:14.0: @ffff88004ac58034 (virt) @4ac58034 (dma) 0x000000 - rsvd[0]
[ 3034.948927] xhci_hcd 0000:00:14.0: @ffff88004ac58038 (virt) @4ac58038 (dma) 0x000000 - rsvd[1]
[ 3034.948930] xhci_hcd 0000:00:14.0: @ffff88004ac5803c (virt) @4ac5803c (dma) 0x000000 - rsvd[2]
[ 3034.948934] xhci_hcd 0000:00:14.0: // Ding dong!
[ 3034.948966] xhci_hcd 0000:00:14.0: Successful evaluate context command
[ 3034.949395] xhci_hcd 0000:00:14.0: Stalled endpoint
[ 3034.949402] xhci_hcd 0000:00:14.0: Cleaning up stalled endpoint ring
[ 3034.949405] xhci_hcd 0000:00:14.0: Finding endpoint context
[ 3034.949407] xhci_hcd 0000:00:14.0: Cycle state = 0x1
[ 3034.949410] xhci_hcd 0000:00:14.0: New dequeue segment = ffff880153a48d00 (virtual)
[ 3034.949412] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x377f7090 (DMA)
[ 3034.949414] xhci_hcd 0000:00:14.0: Queueing new dequeue state
[ 3034.949418] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = ffff880153a48d00 (0x377f7000 dma), new deq ptr = ffff8800377f7090 (0x377f7090 dma), new cycle = 1
[ 3034.949420] xhci_hcd 0000:00:14.0: // Ding dong!
[ 3034.949425] xhci_hcd 0000:00:14.0: Giveback URB ffff8800377baf00, len = 0, expected = 10, status = -32
[ 3034.949430] xhci_hcd 0000:00:14.0: Ignoring reset ep completion code of 1
[ 3034.949434] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @377f7090
[ 3034.949549] xhci_hcd 0000:00:14.0: Stalled endpoint
[ 3034.949553] xhci_hcd 0000:00:14.0: Cleaning up stalled endpoint ring
[ 3034.949555] xhci_hcd 0000:00:14.0: Finding endpoint context
[ 3034.949557] xhci_hcd 0000:00:14.0: Cycle state = 0x1
[ 3034.949560] xhci_hcd 0000:00:14.0: New dequeue segment = ffff880153a48d00 (virtual)
[ 3034.949562] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x377f70c0 (DMA)
[ 3034.949564] xhci_hcd 0000:00:14.0: Queueing new dequeue state
[ 3034.949567] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = ffff880153a48d00 (0x377f7000 dma), new deq ptr = ffff8800377f70c0 (0x377f70c0 dma), new cycle = 1
[ 3034.949569] xhci_hcd 0000:00:14.0: // Ding dong!
[ 3034.949573] xhci_hcd 0000:00:14.0: Giveback URB ffff8800377baf00, len = 0, expected = 10, status = -32
[ 3034.949577] xhci_hcd 0000:00:14.0: Ignoring reset ep completion code of 1
[ 3034.949580] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @377f70c0
[ 3034.949643] xhci_hcd 0000:00:14.0: Stalled endpoint
[ 3034.949646] xhci_hcd 0000:00:14.0: Cleaning up stalled endpoint ring
[ 3034.949648] xhci_hcd 0000:00:14.0: Finding endpoint context
[ 3034.949650] xhci_hcd 0000:00:14.0: Cycle state = 0x1
[ 3034.949653] xhci_hcd 0000:00:14.0: New dequeue segment = ffff880153a48d00 (virtual)
[ 3034.949655] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x377f70f0 (DMA)
[ 3034.949657] xhci_hcd 0000:00:14.0: Queueing new dequeue state
[ 3034.949659] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = ffff880153a48d00 (0x377f7000 dma), new deq ptr = ffff8800377f70f0 (0x377f70f0 dma), new cycle = 1
[ 3034.949662] xhci_hcd 0000:00:14.0: // Ding dong!
[ 3034.949665] xhci_hcd 0000:00:14.0: Giveback URB ffff8800377baf00, len = 0, expected = 10, status = -32
[ 3034.949669] xhci_hcd 0000:00:14.0: Ignoring reset ep completion code of 1
[ 3034.949672] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @377f70f0
[ 3034.949919] xhci_hcd 0000:00:14.0: Transfer error on endpoint
[ 3034.949923] xhci_hcd 0000:00:14.0: TRB error code 4, halted endpoint index = 0
[ 3034.949926] xhci_hcd 0000:00:14.0: Cleaning up stalled endpoint ring
[ 3034.949929] xhci_hcd 0000:00:14.0: Finding endpoint context
[ 3034.949931] xhci_hcd 0000:00:14.0: Cycle state = 0x1
[ 3034.949933] xhci_hcd 0000:00:14.0: New dequeue segment = ffff880153a48d00 (virtual)
[ 3034.949935] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x377f7150 (DMA)
[ 3034.949937] xhci_hcd 0000:00:14.0: Queueing new dequeue state
[ 3034.949940] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = ffff880153a48d00 (0x377f7000 dma), new deq ptr = ffff8800377f7150 (0x377f7150 dma), new cycle = 1
[ 3034.949942] xhci_hcd 0000:00:14.0: // Ding dong!
[ 3034.949946] xhci_hcd 0000:00:14.0: Giveback URB ffff8800377baf00, len = 0, expected = 32, status = -71
[ 3034.949950] xhci_hcd 0000:00:14.0: Ignoring reset ep completion code of 1
[ 3034.949953] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @377f7150
[ 3034.950403] usb 2-5: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32
[ 3034.950408] usb 2-5: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 32
[ 3034.950464] xhci_hcd 0000:00:14.0: Transfer error on endpoint
[ 3034.950467] xhci_hcd 0000:00:14.0: TRB error code 4, halted endpoint index = 0
[ 3034.950472] xhci_hcd 0000:00:14.0: Cleaning up stalled endpoint ring
[ 3034.950474] xhci_hcd 0000:00:14.0: Finding endpoint context
[ 3034.950476] xhci_hcd 0000:00:14.0: Cycle state = 0x1
[ 3034.950479] xhci_hcd 0000:00:14.0: New dequeue segment = ffff880153a48d00 (virtual)
[ 3034.950481] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x377f71b0 (DMA)
[ 3034.950483] xhci_hcd 0000:00:14.0: Queueing new dequeue state
[ 3034.950487] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = ffff880153a48d00 (0x377f7000 dma), new deq ptr = ffff8800377f71b0 (0x377f71b0 dma), new cycle = 1
[ 3034.950489] xhci_hcd 0000:00:14.0: // Ding dong!
[ 3034.950493] xhci_hcd 0000:00:14.0: Giveback URB ffff8800377bacc0, len = 0, expected = 255, status = -71
[ 3034.950496] xhci_hcd 0000:00:14.0: Ignoring reset ep completion code of 1
[ 3034.950500] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @377f71b0
[ 3034.950691] xhci_hcd 0000:00:14.0: Transfer error on endpoint
[ 3034.950694] xhci_hcd 0000:00:14.0: TRB error code 4, halted endpoint index = 0
[ 3034.950697] xhci_hcd 0000:00:14.0: Cleaning up stalled endpoint ring
[ 3034.950699] xhci_hcd 0000:00:14.0: Finding endpoint context
[ 3034.950701] xhci_hcd 0000:00:14.0: Cycle state = 0x1
[ 3034.950703] xhci_hcd 0000:00:14.0: New dequeue segment = ffff880153a48d00 (virtual)
[ 3034.950706] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x377f7210 (DMA)
[ 3034.950709] xhci_hcd 0000:00:14.0: Queueing new dequeue state
[ 3034.950712] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = ffff880153a48d00 (0x377f7000 dma), new deq ptr = ffff8800377f7210 (0x377f7210 dma), new cycle = 1
[ 3034.950714] xhci_hcd 0000:00:14.0: // Ding dong!
[ 3034.950718] xhci_hcd 0000:00:14.0: Giveback URB ffff8800377bacc0, len = 0, expected = 4, status = -71
[ 3034.950721] xhci_hcd 0000:00:14.0: Ignoring reset ep completion code of 1
[ 3034.950724] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @377f7210
[ 3034.950729] usb 2-5: string descriptor 0 read error: -71
[ 3034.950734] usb 2-5: New USB device found, idVendor=1784, idProduct=0006
[ 3034.950737] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3034.951283] xhci_hcd 0000:00:14.0: add ep 0x1, slot id 5, new drop flags = 0x0, new add flags = 0x5
[ 3034.951290] xhci_hcd 0000:00:14.0: add ep 0x81, slot id 5, new drop flags = 0x0, new add flags = 0xd
[ 3034.951294] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev ffff88004ac16800
[ 3034.951297] xhci_hcd 0000:00:14.0: New Input Control Context:
[ 3034.951300] xhci_hcd 0000:00:14.0: @ffff88003750b000 (virt) @3750b000 (dma) 0x000000 - drop flags
[ 3034.951303] xhci_hcd 0000:00:14.0: @ffff88003750b004 (virt) @3750b004 (dma) 0x00000d - add flags
[ 3034.951305] xhci_hcd 0000:00:14.0: @ffff88003750b008 (virt) @3750b008 (dma) 0x000000 - rsvd2[0]
[ 3034.951307] xhci_hcd 0000:00:14.0: @ffff88003750b00c (virt) @3750b00c (dma) 0x000000 - rsvd2[1]
[ 3034.951310] xhci_hcd 0000:00:14.0: @ffff88003750b010 (virt) @3750b010 (dma) 0x000000 - rsvd2[2]
[ 3034.951312] xhci_hcd 0000:00:14.0: @ffff88003750b014 (virt) @3750b014 (dma) 0x000000 - rsvd2[3]
[ 3034.951314] xhci_hcd 0000:00:14.0: @ffff88003750b018 (virt) @3750b018 (dma) 0x000000 - rsvd2[4]
[ 3034.951317] xhci_hcd 0000:00:14.0: @ffff88003750b01c (virt) @3750b01c (dma) 0x000000 - rsvd2[5]
[ 3034.951319] xhci_hcd 0000:00:14.0: Slot Context:
[ 3034.951321] xhci_hcd 0000:00:14.0: @ffff88003750b020 (virt) @3750b020 (dma) 0x18100000 - dev_info
[ 3034.951324] xhci_hcd 0000:00:14.0: @ffff88003750b024 (virt) @3750b024 (dma) 0x050000 - dev_info2
[ 3034.951326] xhci_hcd 0000:00:14.0: @ffff88003750b028 (virt) @3750b028 (dma) 0x000000 - tt_info
[ 3034.951329] xhci_hcd 0000:00:14.0: @ffff88003750b02c (virt) @3750b02c (dma) 0x000000 - dev_state
[ 3034.951333] xhci_hcd 0000:00:14.0: @ffff88003750b030 (virt) @3750b030 (dma) 0x000000 - rsvd[0]
[ 3034.951336] xhci_hcd 0000:00:14.0: @ffff88003750b034 (virt) @3750b034 (dma) 0x000000 - rsvd[1]
[ 3034.951338] xhci_hcd 0000:00:14.0: @ffff88003750b038 (virt) @3750b038 (dma) 0x000000 - rsvd[2]
[ 3034.951340] xhci_hcd 0000:00:14.0: @ffff88003750b03c (virt) @3750b03c (dma) 0x000000 - rsvd[3]
[ 3034.951343] xhci_hcd 0000:00:14.0: IN Endpoint 00 Context (ep_index 00):
[ 3034.951345] xhci_hcd 0000:00:14.0: @ffff88003750b040 (virt) @3750b040 (dma) 0x000001 - ep_info
[ 3034.951348] xhci_hcd 0000:00:14.0: @ffff88003750b044 (virt) @3750b044 (dma) 0x080026 - ep_info2
[ 3034.951350] xhci_hcd 0000:00:14.0: @ffff88003750b048 (virt) @3750b048 (dma) 0x377f7031 - deq
[ 3034.951352] xhci_hcd 0000:00:14.0: @ffff88003750b050 (virt) @3750b050 (dma) 0x000000 - tx_info
[ 3034.951355] xhci_hcd 0000:00:14.0: @ffff88003750b054 (virt) @3750b054 (dma) 0x000000 - rsvd[0]
[ 3034.951357] xhci_hcd 0000:00:14.0: @ffff88003750b058 (virt) @3750b058 (dma) 0x000000 - rsvd[1]
[ 3034.951360] xhci_hcd 0000:00:14.0: @ffff88003750b05c (virt) @3750b05c (dma) 0x000000 - rsvd[2]
[ 3034.951362] xhci_hcd 0000:00:14.0: OUT Endpoint 01 Context (ep_index 01):
[ 3034.951364] xhci_hcd 0000:00:14.0: @ffff88003750b060 (virt) @3750b060 (dma) 0x080000 - ep_info
[ 3034.951367] xhci_hcd 0000:00:14.0: @ffff88003750b064 (virt) @3750b064 (dma) 0x20001e - ep_info2
[ 3034.951369] xhci_hcd 0000:00:14.0: @ffff88003750b068 (virt) @3750b068 (dma) 0x29d84001 - deq
[ 3034.951371] xhci_hcd 0000:00:14.0: @ffff88003750b070 (virt) @3750b070 (dma) 0x200020 - tx_info
[ 3034.951374] xhci_hcd 0000:00:14.0: @ffff88003750b074 (virt) @3750b074 (dma) 0x000000 - rsvd[0]
[ 3034.951376] xhci_hcd 0000:00:14.0: @ffff88003750b078 (virt) @3750b078 (dma) 0x000000 - rsvd[1]
[ 3034.951378] xhci_hcd 0000:00:14.0: @ffff88003750b07c (virt) @3750b07c (dma) 0x000000 - rsvd[2]
[ 3034.951381] xhci_hcd 0000:00:14.0: IN Endpoint 01 Context (ep_index 02):
[ 3034.951383] xhci_hcd 0000:00:14.0: @ffff88003750b080 (virt) @3750b080 (dma) 0x080000 - ep_info
[ 3034.951385] xhci_hcd 0000:00:14.0: @ffff88003750b084 (virt) @3750b084 (dma) 0x20003e - ep_info2
[ 3034.951387] xhci_hcd 0000:00:14.0: @ffff88003750b088 (virt) @3750b088 (dma) 0x52497001 - deq
[ 3034.951390] xhci_hcd 0000:00:14.0: @ffff88003750b090 (virt) @3750b090 (dma) 0x200020 - tx_info
[ 3034.951392] xhci_hcd 0000:00:14.0: @ffff88003750b094 (virt) @3750b094 (dma) 0x000000 - rsvd[0]
[ 3034.951394] xhci_hcd 0000:00:14.0: @ffff88003750b098 (virt) @3750b098 (dma) 0x000000 - rsvd[1]
[ 3034.951397] xhci_hcd 0000:00:14.0: @ffff88003750b09c (virt) @3750b09c (dma) 0x000000 - rsvd[2]
[ 3034.951401] xhci_hcd 0000:00:14.0: // Ding dong!
[ 3034.952625] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command
[ 3034.952630] xhci_hcd 0000:00:14.0: Output context after successful config ep cmd:
[ 3034.952632] xhci_hcd 0000:00:14.0: Slot Context:
[ 3034.952636] xhci_hcd 0000:00:14.0: @ffff88004ac58000 (virt) @4ac58000 (dma) 0x18100000 - dev_info
[ 3034.952638] xhci_hcd 0000:00:14.0: @ffff88004ac58004 (virt) @4ac58004 (dma) 0x050000 - dev_info2
[ 3034.952641] xhci_hcd 0000:00:14.0: @ffff88004ac58008 (virt) @4ac58008 (dma) 0x000000 - tt_info
[ 3034.952643] xhci_hcd 0000:00:14.0: @ffff88004ac5800c (virt) @4ac5800c (dma) 0x18000005 - dev_state
[ 3034.952646] xhci_hcd 0000:00:14.0: @ffff88004ac58010 (virt) @4ac58010 (dma) 0x000000 - rsvd[0]
[ 3034.952648] xhci_hcd 0000:00:14.0: @ffff88004ac58014 (virt) @4ac58014 (dma) 0x000000 - rsvd[1]
[ 3034.952651] xhci_hcd 0000:00:14.0: @ffff88004ac58018 (virt) @4ac58018 (dma) 0x000000 - rsvd[2]
[ 3034.952653] xhci_hcd 0000:00:14.0: @ffff88004ac5801c (virt) @4ac5801c (dma) 0x000000 - rsvd[3]
[ 3034.952656] xhci_hcd 0000:00:14.0: IN Endpoint 00 Context (ep_index 00):
[ 3034.952658] xhci_hcd 0000:00:14.0: @ffff88004ac58020 (virt) @4ac58020 (dma) 0x000003 - ep_info
[ 3034.952661] xhci_hcd 0000:00:14.0: @ffff88004ac58024 (virt) @4ac58024 (dma) 0x080026 - ep_info2
[ 3034.952663] xhci_hcd 0000:00:14.0: @ffff88004ac58028 (virt) @4ac58028 (dma) 0x377f7211 - deq
[ 3034.952666] xhci_hcd 0000:00:14.0: @ffff88004ac58030 (virt) @4ac58030 (dma) 0x000000 - tx_info
[ 3034.952668] xhci_hcd 0000:00:14.0: @ffff88004ac58034 (virt) @4ac58034 (dma) 0x000000 - rsvd[0]
[ 3034.952670] xhci_hcd 0000:00:14.0: @ffff88004ac58038 (virt) @4ac58038 (dma) 0x000000 - rsvd[1]
[ 3034.952673] xhci_hcd 0000:00:14.0: @ffff88004ac5803c (virt) @4ac5803c (dma) 0x000000 - rsvd[2]
[ 3034.952675] xhci_hcd 0000:00:14.0: OUT Endpoint 01 Context (ep_index 01):
[ 3034.952677] xhci_hcd 0000:00:14.0: @ffff88004ac58040 (virt) @4ac58040 (dma) 0x080001 - ep_info
[ 3034.952680] xhci_hcd 0000:00:14.0: @ffff88004ac58044 (virt) @4ac58044 (dma) 0x20001e - ep_info2
[ 3034.952682] xhci_hcd 0000:00:14.0: @ffff88004ac58048 (virt) @4ac58048 (dma) 0x29d84001 - deq
[ 3034.952684] xhci_hcd 0000:00:14.0: @ffff88004ac58050 (virt) @4ac58050 (dma) 0x200020 - tx_info
[ 3034.952687] xhci_hcd 0000:00:14.0: @ffff88004ac58054 (virt) @4ac58054 (dma) 0x000000 - rsvd[0]
[ 3034.952689] xhci_hcd 0000:00:14.0: @ffff88004ac58058 (virt) @4ac58058 (dma) 0x000000 - rsvd[1]
[ 3034.952691] xhci_hcd 0000:00:14.0: @ffff88004ac5805c (virt) @4ac5805c (dma) 0x000000 - rsvd[2]
[ 3034.952694] xhci_hcd 0000:00:14.0: IN Endpoint 01 Context (ep_index 02):
[ 3034.952696] xhci_hcd 0000:00:14.0: @ffff88004ac58060 (virt) @4ac58060 (dma) 0x080001 - ep_info
[ 3034.952698] xhci_hcd 0000:00:14.0: @ffff88004ac58064 (virt) @4ac58064 (dma) 0x20003e - ep_info2
[ 3034.952700] xhci_hcd 0000:00:14.0: @ffff88004ac58068 (virt) @4ac58068 (dma) 0x52497001 - deq
[ 3034.952703] xhci_hcd 0000:00:14.0: @ffff88004ac58070 (virt) @4ac58070 (dma) 0x200020 - tx_info
[ 3034.952705] xhci_hcd 0000:00:14.0: @ffff88004ac58074 (virt) @4ac58074 (dma) 0x000000 - rsvd[0]
[ 3034.952707] xhci_hcd 0000:00:14.0: @ffff88004ac58078 (virt) @4ac58078 (dma) 0x000000 - rsvd[1]
[ 3034.952710] xhci_hcd 0000:00:14.0: @ffff88004ac5807c (virt) @4ac5807c (dma) 0x000000 - rsvd[2]
[ 3034.952715] xhci_hcd 0000:00:14.0: Endpoint 0x1 ep reset callback called
[ 3034.952717] xhci_hcd 0000:00:14.0: Endpoint 0x81 ep reset callback called
[ 3034.952956] mceusb 2-5:1.0: mceusb_dev_probe called
[ 3034.952961] mceusb 2-5:1.0: acceptable interrupt outbound endpoint found
[ 3034.952964] mceusb 2-5:1.0: acceptable interrupt inbound endpoint found
[ 3034.952974] Registered IR keymap rc-rc6-mce
[ 3034.953113] input: Media Center Ed. eHome Infrared Remote Transceiver (1784:0006) as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/rc/rc0/input18
[ 3034.953450] rc0: Media Center Ed. eHome Infrared Remote Transceiver (1784:0006) as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/rc/rc0
[ 3034.953921] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 3034.954006] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input19
[ 3034.956765] mceusb 2-5:1.0: Flushing receive buffers
[ 3034.956770] mceusb 2-5:1.0: receive request called (size=0x20)
[ 3034.956785] xhci_queue_intr_tx: 4 callbacks suppressed
[ 3034.956789] usb 2-5: Driver uses different interval (8 microframes) than xHCI (256 microframes)
[ 3034.956794] mceusb 2-5:1.0: receive request complete (res=0)
[ 3034.956797] mceusb 2-5:1.0: receive request called (size=0x2)
[ 3034.956801] usb 2-5: Driver uses different interval (8 microframes) than xHCI (256 microframes)
[ 3034.956803] mceusb 2-5:1.0: receive request complete (res=0)
[ 3034.967806] mceusb 2-5:1.0: receive request called (size=0x3)
[ 3034.967817] usb 2-5: Driver uses different interval (8 microframes) than xHCI (256 microframes)
[ 3034.967822] mceusb 2-5:1.0: receive request complete (res=0)
[ 3034.975123] mceusb 2-5:1.0: tx data: ff 22 (length=2)
[ 3034.978817] mceusb 2-5:1.0: receive request called (size=0x2)
[ 3034.978828] usb 2-5: Driver uses different interval (8 microframes) than xHCI (256 microframes)
[ 3034.978833] mceusb 2-5:1.0: receive request complete (res=0)
[ 3034.989792] mceusb 2-5:1.0: receive request called (size=0x2)
[ 3034.989804] usb 2-5: Driver uses different interval (8 microframes) than xHCI (256 microframes)
[ 3034.989809] mceusb 2-5:1.0: receive request complete (res=0)
[ 3034.994788] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
[ 3035.000790] mceusb 2-5:1.0: receive request called (size=0x2)
[ 3035.000802] usb 2-5: Driver uses different interval (8 microframes) than xHCI (256 microframes)
[ 3035.000807] mceusb 2-5:1.0: receive request complete (res=0)
[ 3035.007111] mceusb 2-5:1.0: tx data: 00 ff aa (length=3)
[ 3035.007116] mceusb 2-5:1.0: Device resume requested
[ 3035.007121] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 30 bytes untransferred
[ 3035.007124] mceusb 2-5:1.0: setup answer received 2 bytes
[ 3035.007127] mceusb 2-5:1.0: rx data: ff fe (length=2)
[ 3035.007129] mceusb 2-5:1.0: Illegal PORT_SYS command
[ 3035.011783] mceusb 2-5:1.0: receive request called (size=0x3)
[ 3035.011794] usb 2-5: Driver uses different interval (8 microframes) than xHCI (256 microframes)
[ 3035.011798] mceusb 2-5:1.0: receive request complete (res=0)
[ 3035.023803] mceusb 2-5:1.0: receive request called (size=0x2)
[ 3035.023816] usb 2-5: Driver uses different interval (8 microframes) than xHCI (256 microframes)
[ 3035.023821] mceusb 2-5:1.0: receive request complete (res=0)
[ 3035.034785] mceusb 2-5:1.0: receive request called (size=0x2)
[ 3035.034795] usb 2-5: Driver uses different interval (8 microframes) than xHCI (256 microframes)
[ 3035.034799] mceusb 2-5:1.0: receive request complete (res=0)
[ 3035.039106] mceusb 2-5:1.0: tx data: ff 18 (length=2)
[ 3035.045793] mceusb 2-5:1.0: receive request called (size=0x2)
[ 3035.045805] usb 2-5: Driver uses different interval (8 microframes) than xHCI (256 microframes)
[ 3035.045810] mceusb 2-5:1.0: receive request complete (res=0)
[ 3035.056783] mceusb 2-5:1.0: receive request called (size=0x2)
[ 3035.056796] mceusb 2-5:1.0: receive request complete (res=0)
[ 3035.067787] mceusb 2-5:1.0: receive request called (size=0x3)
[ 3035.067799] mceusb 2-5:1.0: receive request complete (res=0)
[ 3035.071107] mceusb 2-5:1.0: tx data: 9f 05 (length=2)
[ 3035.071112] mceusb 2-5:1.0: Unknown command 0x9f 0x05
[ 3035.071117] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 30 bytes untransferred
[ 3035.071121] mceusb 2-5:1.0: rx data: ff fe (length=2)
[ 3035.071123] mceusb 2-5:1.0: Illegal PORT_SYS command
[ 3035.078791] mceusb 2-5:1.0: receive request called (size=0x3)
[ 3035.078799] mceusb 2-5:1.0: receive request complete (res=0)
[ 3035.089783] mceusb 2-5:1.0: receive request called (size=0x3)
[ 3035.089793] mceusb 2-5:1.0: receive request complete (res=0)
[ 3035.100807] mceusb 2-5:1.0: Registered with mce emulator interface version 1
[ 3035.100812] mceusb 2-5:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active)
[ 3035.103108] mceusb 2-5:1.0: tx data: 9f 16 (length=2)
[ 3035.135110] mceusb 2-5:1.0: tx data: 00 ff aa (length=3)
[ 3035.135116] mceusb 2-5:1.0: Device resume requested
[ 3035.167173] mceusb 2-5:1.0: tx data: 9f 07 (length=2)
[ 3035.167179] mceusb 2-5:1.0: Get carrier mode and freq
[ 3035.199170] mceusb 2-5:1.0: tx data: 9f 13 (length=2)
[ 3035.199176] mceusb 2-5:1.0: Get transmit blaster mask
[ 3035.199182] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 28 bytes untransferred
[ 3035.199186] mceusb 2-5:1.0: rx data: 9f 06 01 42 (length=4)
[ 3035.199189] mceusb 2-5:1.0: Got carrier of 37037 Hz (period 27us)
[ 3035.231169] mceusb 2-5:1.0: tx data: 9f 0d (length=2)
[ 3035.231175] mceusb 2-5:1.0: Get receive timeout
[ 3035.231181] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 29 bytes untransferred
[ 3035.231185] mceusb 2-5:1.0: rx data: 9f 08 03 (length=3)
[ 3035.231188] mceusb 2-5:1.0: Got transmit blaster mask of 0x03
[ 3035.263168] mceusb 2-5:1.0: tx data: 9f 15 (length=2)
[ 3035.263174] mceusb 2-5:1.0: Get receive sensor
[ 3035.263180] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 28 bytes untransferred
[ 3035.263184] mceusb 2-5:1.0: rx data: 9f 0c 07 d0 (length=4)
[ 3035.263187] mceusb 2-5:1.0: Got receive timeout of 100 ms
[ 3035.295168] mceusb 2-5:1.0: tx data: ff 11 00 (length=3)
[ 3035.295178] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 29 bytes untransferred
[ 3035.295182] mceusb 2-5:1.0: rx data: 9f 14 01 (length=3)
[ 3035.295185] mceusb 2-5:1.0: Got long-range receive sensor in use
[ 3035.327166] mceusb 2-5:1.0: tx data: 00 ff aa (length=3)
[ 3035.327172] mceusb 2-5:1.0: Device resume requested
[ 3035.327178] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 25 bytes untransferred
[ 3035.327182] mceusb 2-5:1.0: rx data: ff 11 00 03 ff 03 fd (length=7)
[ 3035.327185] mceusb 2-5:1.0: TX port 1: blaster is not connected
[ 3035.359165] mceusb 2-5:1.0: tx data: ff 11 01 (length=3)
[ 3035.391094] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 25 bytes untransferred
[ 3035.391105] mceusb 2-5:1.0: rx data: ff 11 01 03 ff 03 fd (length=7)
[ 3035.391109] mceusb 2-5:1.0: TX port 2: blaster is not connected
[ 3132.602967] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 30 bytes untransferred
[ 3132.602980] mceusb 2-5:1.0: rx data: 81 ff (length=2)
[ 3132.602983] mceusb 2-5:1.0: Raw IR data, 1 pulse/space samples
[ 3132.602986] mceusb 2-5:1.0: Storing pulse with duration 6350000
[ 3132.602988] mceusb 2-5:1.0: processed IR data
[ 3132.634981] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 30 bytes untransferred
[ 3132.634994] mceusb 2-5:1.0: rx data: 81 b5 (length=2)
[ 3132.634997] mceusb 2-5:1.0: Raw IR data, 1 pulse/space samples
[ 3132.634999] mceusb 2-5:1.0: Storing pulse with duration 2650000
[ 3132.635002] mceusb 2-5:1.0: processed IR data
[ 3132.666984] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 1 bytes untransferred
[ 3132.666997] mceusb 2-5:1.0: rx data: 9e 59 8c 20 8d 0a 8c 20 8c 0b 8c 0a 8c 0a 8c 0a 8c 21 8c 0a 8c 0a 8c 0b 8c 0a 8c 21 8b 21 8c (length=31)
[ 3132.667000] mceusb 2-5:1.0: Raw IR data, 30 pulse/space samples
[ 3132.667003] mceusb 2-5:1.0: Storing space with duration 4450000
[ 3132.667005] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.667008] mceusb 2-5:1.0: Storing space with duration 1600000
[ 3132.667010] mceusb 2-5:1.0: Storing pulse with duration 650000
[ 3132.667012] mceusb 2-5:1.0: Storing space with duration 500000
[ 3132.667014] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.667016] mceusb 2-5:1.0: Storing space with duration 1600000
[ 3132.667018] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.667020] mceusb 2-5:1.0: Storing space with duration 550000
[ 3132.667022] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.667024] mceusb 2-5:1.0: Storing space with duration 500000
[ 3132.667026] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.667028] mceusb 2-5:1.0: Storing space with duration 500000
[ 3132.667030] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.667032] mceusb 2-5:1.0: Storing space with duration 500000
[ 3132.667034] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.667036] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3132.667038] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.667040] mceusb 2-5:1.0: Storing space with duration 500000
[ 3132.667042] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.667045] mceusb 2-5:1.0: Storing space with duration 500000
[ 3132.667047] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.667049] mceusb 2-5:1.0: Storing space with duration 550000
[ 3132.667051] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.667053] mceusb 2-5:1.0: Storing space with duration 500000
[ 3132.667055] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.667057] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3132.667059] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3132.667061] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3132.667063] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.667065] mceusb 2-5:1.0: processed IR data
[ 3132.698977] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 4 bytes untransferred
[ 3132.698988] mceusb 2-5:1.0: rx data: 9b 7f 54 8b 0b 8c 0a 8c 0b 8b 0b 8b 0b 8c 0a 8c 0b 8b 0b 8b 21 8c 21 8b 22 8b 7f 7f (length=28)
[ 3132.698991] mceusb 2-5:1.0: Raw IR data, 27 pulse/space samples
[ 3132.698994] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.698997] mceusb 2-5:1.0: Storing space with duration 4200000
[ 3132.698999] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3132.699001] mceusb 2-5:1.0: Storing space with duration 550000
[ 3132.699003] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.699005] mceusb 2-5:1.0: Storing space with duration 500000
[ 3132.699007] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.699009] mceusb 2-5:1.0: Storing space with duration 550000
[ 3132.699011] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3132.699013] mceusb 2-5:1.0: Storing space with duration 550000
[ 3132.699015] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3132.699017] mceusb 2-5:1.0: Storing space with duration 550000
[ 3132.699019] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.699021] mceusb 2-5:1.0: Storing space with duration 500000
[ 3132.699023] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.699025] mceusb 2-5:1.0: Storing space with duration 550000
[ 3132.699027] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3132.699029] mceusb 2-5:1.0: Storing space with duration 550000
[ 3132.699031] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3132.699033] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3132.699036] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3132.699038] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3132.699040] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3132.699042] mceusb 2-5:1.0: Storing space with duration 1700000
[ 3132.699044] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3132.699046] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.699049] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.699050] mceusb 2-5:1.0: processed IR data
[ 3132.730963] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3132.730973] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3132.730976] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3132.730979] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.730981] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.730983] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.730985] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.730988] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.730989] mceusb 2-5:1.0: processed IR data
[ 3132.763031] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 23 bytes untransferred
[ 3132.763045] mceusb 2-5:1.0: rx data: 88 33 ff b4 2d 8b 7f 7f 7f (length=9)
[ 3132.763047] mceusb 2-5:1.0: Raw IR data, 8 pulse/space samples
[ 3132.763050] mceusb 2-5:1.0: Storing space with duration 2550000
[ 3132.763052] mceusb 2-5:1.0: Storing pulse with duration 6350000
[ 3132.763055] mceusb 2-5:1.0: Storing pulse with duration 2600000
[ 3132.763057] mceusb 2-5:1.0: Storing space with duration 2250000
[ 3132.763059] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3132.763061] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.763063] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.763065] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.763067] mceusb 2-5:1.0: processed IR data
[ 3132.795026] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3132.795039] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3132.795042] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3132.795044] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.795047] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.795049] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.795051] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.795053] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.795055] mceusb 2-5:1.0: processed IR data
[ 3132.826959] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3132.826971] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3132.826974] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3132.826977] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.826979] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.826981] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.826984] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.826985] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.826987] mceusb 2-5:1.0: processed IR data
[ 3132.858963] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 23 bytes untransferred
[ 3132.858975] mceusb 2-5:1.0: rx data: 88 7f 7f 1c ff b5 2c 8b 7f (length=9)
[ 3132.858978] mceusb 2-5:1.0: Raw IR data, 8 pulse/space samples
[ 3132.858981] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.858984] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.858986] mceusb 2-5:1.0: Storing space with duration 1400000
[ 3132.858988] mceusb 2-5:1.0: Storing pulse with duration 6350000
[ 3132.858990] mceusb 2-5:1.0: Storing pulse with duration 2650000
[ 3132.858992] mceusb 2-5:1.0: Storing space with duration 2200000
[ 3132.858995] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3132.858997] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.858999] mceusb 2-5:1.0: processed IR data
[ 3132.890990] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3132.891003] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3132.891006] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3132.891009] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.891012] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.891015] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.891017] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.891020] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.891022] mceusb 2-5:1.0: processed IR data
[ 3132.923021] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3132.923034] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3132.923037] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3132.923039] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.923042] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.923044] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.923046] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.923048] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.923050] mceusb 2-5:1.0: processed IR data
[ 3132.955021] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 25 bytes untransferred
[ 3132.955033] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 5f (length=6)
[ 3132.955036] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3132.955039] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.955041] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.955043] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.955045] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3132.955047] mceusb 2-5:1.0: Storing space with duration 4750000
[ 3132.955050] mceusb 2-5:1.0: rx data: 85 (length=1)
[ 3132.955052] mceusb 2-5:1.0: End of raw IR data
[ 3132.955059] mceusb 2-5:1.0: processed IR data
[ 3133.307002] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 30 bytes untransferred
[ 3133.307015] mceusb 2-5:1.0: rx data: 81 ff (length=2)
[ 3133.307018] mceusb 2-5:1.0: Raw IR data, 1 pulse/space samples
[ 3133.307020] mceusb 2-5:1.0: Storing pulse with duration 6350000
[ 3133.307023] mceusb 2-5:1.0: processed IR data
[ 3133.339008] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 19 bytes untransferred
[ 3133.339021] mceusb 2-5:1.0: rx data: 8c b5 59 8c 20 8c 0a 8c 21 8c 0a 8c 0a (length=13)
[ 3133.339024] mceusb 2-5:1.0: Raw IR data, 12 pulse/space samples
[ 3133.339026] mceusb 2-5:1.0: Storing pulse with duration 2650000
[ 3133.339029] mceusb 2-5:1.0: Storing space with duration 4450000
[ 3133.339032] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.339034] mceusb 2-5:1.0: Storing space with duration 1600000
[ 3133.339036] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.339038] mceusb 2-5:1.0: Storing space with duration 500000
[ 3133.339040] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.339042] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3133.339044] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.339046] mceusb 2-5:1.0: Storing space with duration 500000
[ 3133.339048] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.339051] mceusb 2-5:1.0: Storing space with duration 500000
[ 3133.339053] mceusb 2-5:1.0: processed IR data
[ 3133.371019] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 1 bytes untransferred
[ 3133.371032] mceusb 2-5:1.0: rx data: 9e 8c 0b 8c 0a 8c 21 8b 0b 8c 0a 8c 0a 8c 0b 8c 20 8c 21 8c 0a 8c 0a 8c 0b 8b 21 8c 21 8b 0b (length=31)
[ 3133.371035] mceusb 2-5:1.0: Raw IR data, 30 pulse/space samples
[ 3133.371037] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.371040] mceusb 2-5:1.0: Storing space with duration 550000
[ 3133.371042] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.371045] mceusb 2-5:1.0: Storing space with duration 500000
[ 3133.371047] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.371049] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3133.371051] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3133.371053] mceusb 2-5:1.0: Storing space with duration 550000
[ 3133.371055] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.371057] mceusb 2-5:1.0: Storing space with duration 500000
[ 3133.371059] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.371061] mceusb 2-5:1.0: Storing space with duration 500000
[ 3133.371063] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.371066] mceusb 2-5:1.0: Storing space with duration 550000
[ 3133.371068] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.371070] mceusb 2-5:1.0: Storing space with duration 1600000
[ 3133.371072] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.371074] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3133.371076] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.371078] mceusb 2-5:1.0: Storing space with duration 500000
[ 3133.371080] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.371082] mceusb 2-5:1.0: Storing space with duration 500000
[ 3133.371084] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.371086] mceusb 2-5:1.0: Storing space with duration 550000
[ 3133.371089] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3133.371091] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3133.371093] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.371095] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3133.371097] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3133.371099] mceusb 2-5:1.0: Storing space with duration 550000
[ 3133.371101] mceusb 2-5:1.0: processed IR data
[ 3133.403007] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 18 bytes untransferred
[ 3133.403020] mceusb 2-5:1.0: rx data: 8d ff d5 0b 8b 21 8c 21 8b 21 8c 7f 7f 7f (length=14)
[ 3133.403023] mceusb 2-5:1.0: Raw IR data, 13 pulse/space samples
[ 3133.403026] mceusb 2-5:1.0: Storing pulse with duration 6350000
[ 3133.403029] mceusb 2-5:1.0: Storing pulse with duration 4250000
[ 3133.403031] mceusb 2-5:1.0: Storing space with duration 550000
[ 3133.403033] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3133.403036] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3133.403038] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.403040] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3133.403042] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3133.403044] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3133.403046] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.403048] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.403050] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.403052] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.403054] mceusb 2-5:1.0: processed IR data
[ 3133.435001] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 25 bytes untransferred
[ 3133.435015] mceusb 2-5:1.0: rx data: 86 7f 7f 7f 7f 33 ff (length=7)
[ 3133.435018] mceusb 2-5:1.0: Raw IR data, 6 pulse/space samples
[ 3133.435020] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.435023] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.435025] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.435027] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.435029] mceusb 2-5:1.0: Storing space with duration 2550000
[ 3133.435031] mceusb 2-5:1.0: Storing pulse with duration 6350000
[ 3133.435033] mceusb 2-5:1.0: processed IR data
[ 3133.467000] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 24 bytes untransferred
[ 3133.467013] mceusb 2-5:1.0: rx data: 87 b4 2c 8c 7f 7f 7f 7f (length=8)
[ 3133.467016] mceusb 2-5:1.0: Raw IR data, 7 pulse/space samples
[ 3133.467019] mceusb 2-5:1.0: Storing pulse with duration 2600000
[ 3133.467021] mceusb 2-5:1.0: Storing space with duration 2200000
[ 3133.467024] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3133.467026] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.467028] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.467030] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.467032] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.467034] mceusb 2-5:1.0: processed IR data
[ 3133.498998] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3133.499011] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3133.499014] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3133.499016] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.499019] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.499021] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.499023] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.499025] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.499027] mceusb 2-5:1.0: processed IR data
[ 3133.530995] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3133.531008] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3133.531011] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3133.531013] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.531016] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.531018] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.531020] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.531022] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.531024] mceusb 2-5:1.0: processed IR data
[ 3133.562997] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 23 bytes untransferred
[ 3133.563010] mceusb 2-5:1.0: rx data: 88 7f 18 ff b5 2c 8b 7f 7f (length=9)
[ 3133.563013] mceusb 2-5:1.0: Raw IR data, 8 pulse/space samples
[ 3133.563016] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.563019] mceusb 2-5:1.0: Storing space with duration 1200000
[ 3133.563021] mceusb 2-5:1.0: Storing pulse with duration 6350000
[ 3133.563023] mceusb 2-5:1.0: Storing pulse with duration 2650000
[ 3133.563025] mceusb 2-5:1.0: Storing space with duration 2200000
[ 3133.563027] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3133.563030] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.563032] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.563034] mceusb 2-5:1.0: processed IR data
[ 3133.594993] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3133.595006] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3133.595009] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3133.595011] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.595014] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.595016] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.595018] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.595020] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.595022] mceusb 2-5:1.0: processed IR data
[ 3133.626992] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3133.627005] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3133.627008] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3133.627011] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.627014] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.627016] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.627018] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.627020] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.627022] mceusb 2-5:1.0: processed IR data
[ 3133.658941] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3133.658954] mceusb 2-5:1.0: rx data: 84 7f 7f 7f 5f (length=5)
[ 3133.658957] mceusb 2-5:1.0: Raw IR data, 4 pulse/space samples
[ 3133.658960] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.658962] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.658964] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3133.658966] mceusb 2-5:1.0: Storing space with duration 4750000
[ 3133.658969] mceusb 2-5:1.0: rx data: 84 (length=1)
[ 3133.658971] mceusb 2-5:1.0: End of raw IR data
[ 3133.658975] mceusb 2-5:1.0: processed IR data
[ 3137.082843] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 30 bytes untransferred
[ 3137.082855] mceusb 2-5:1.0: rx data: 81 ff (length=2)
[ 3137.082858] mceusb 2-5:1.0: Raw IR data, 1 pulse/space samples
[ 3137.082861] mceusb 2-5:1.0: Storing pulse with duration 6350000
[ 3137.082863] mceusb 2-5:1.0: processed IR data
[ 3137.114840] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 30 bytes untransferred
[ 3137.114853] mceusb 2-5:1.0: rx data: 81 b5 (length=2)
[ 3137.114856] mceusb 2-5:1.0: Raw IR data, 1 pulse/space samples
[ 3137.114859] mceusb 2-5:1.0: Storing pulse with duration 2650000
[ 3137.114861] mceusb 2-5:1.0: processed IR data
[ 3137.146858] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 1 bytes untransferred
[ 3137.146871] mceusb 2-5:1.0: rx data: 9e 59 8c 21 8c 0a 8c 20 8c 0b 8c 0a 8c 0a 8c 0a 8c 21 8c 0a 8c 0b 8b 0b 8c 0a 8c 21 8b 21 8c (length=31)
[ 3137.146874] mceusb 2-5:1.0: Raw IR data, 30 pulse/space samples
[ 3137.146877] mceusb 2-5:1.0: Storing space with duration 4450000
[ 3137.146880] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.146882] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3137.146884] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.146886] mceusb 2-5:1.0: Storing space with duration 500000
[ 3137.146888] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.146890] mceusb 2-5:1.0: Storing space with duration 1600000
[ 3137.146892] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.146894] mceusb 2-5:1.0: Storing space with duration 550000
[ 3137.146897] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.146899] mceusb 2-5:1.0: Storing space with duration 500000
[ 3137.146901] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.146903] mceusb 2-5:1.0: Storing space with duration 500000
[ 3137.146905] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.146907] mceusb 2-5:1.0: Storing space with duration 500000
[ 3137.146909] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.146911] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3137.146913] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.146915] mceusb 2-5:1.0: Storing space with duration 500000
[ 3137.146917] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.146919] mceusb 2-5:1.0: Storing space with duration 550000
[ 3137.146922] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3137.146924] mceusb 2-5:1.0: Storing space with duration 550000
[ 3137.146926] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.146928] mceusb 2-5:1.0: Storing space with duration 500000
[ 3137.146930] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.146932] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3137.146934] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3137.146936] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3137.146938] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.146940] mceusb 2-5:1.0: processed IR data
[ 3137.178823] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 2 bytes untransferred
[ 3137.178836] mceusb 2-5:1.0: rx data: 9d 7f 27 8c 21 8b 0b 8c 0a 8c 0b 8b 0b 8b 0b 8c 0a 8c 0b 8b 0b 8b 22 8b 21 8c 21 8b 7f 7f (length=30)
[ 3137.178839] mceusb 2-5:1.0: Raw IR data, 29 pulse/space samples
[ 3137.178841] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.178844] mceusb 2-5:1.0: Storing space with duration 1950000
[ 3137.178847] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.178849] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3137.178851] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3137.178853] mceusb 2-5:1.0: Storing space with duration 550000
[ 3137.178855] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.178857] mceusb 2-5:1.0: Storing space with duration 500000
[ 3137.178859] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.178861] mceusb 2-5:1.0: Storing space with duration 550000
[ 3137.178863] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3137.178865] mceusb 2-5:1.0: Storing space with duration 550000
[ 3137.178867] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3137.178869] mceusb 2-5:1.0: Storing space with duration 550000
[ 3137.178871] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.178873] mceusb 2-5:1.0: Storing space with duration 500000
[ 3137.178875] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.178878] mceusb 2-5:1.0: Storing space with duration 550000
[ 3137.178880] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3137.178882] mceusb 2-5:1.0: Storing space with duration 550000
[ 3137.178884] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3137.178886] mceusb 2-5:1.0: Storing space with duration 1700000
[ 3137.178888] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3137.178890] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3137.178892] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.178894] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3137.178896] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3137.178898] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.178900] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.178902] mceusb 2-5:1.0: processed IR data
[ 3137.210802] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3137.210813] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3137.210816] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3137.210818] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.210821] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.210823] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.210825] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.210827] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.210829] mceusb 2-5:1.0: processed IR data
[ 3137.242786] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 24 bytes untransferred
[ 3137.242799] mceusb 2-5:1.0: rx data: 87 30 ff b4 2c 8c 7f 7f (length=8)
[ 3137.242802] mceusb 2-5:1.0: Raw IR data, 7 pulse/space samples
[ 3137.242805] mceusb 2-5:1.0: Storing space with duration 2400000
[ 3137.242807] mceusb 2-5:1.0: Storing pulse with duration 6350000
[ 3137.242810] mceusb 2-5:1.0: Storing pulse with duration 2600000
[ 3137.242812] mceusb 2-5:1.0: Storing space with duration 2200000
[ 3137.242814] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.242816] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.242818] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.242820] mceusb 2-5:1.0: processed IR data
[ 3137.274836] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3137.274850] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3137.274853] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3137.274855] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.274858] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.274860] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.274862] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.274864] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.274866] mceusb 2-5:1.0: processed IR data
[ 3137.306836] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 25 bytes untransferred
[ 3137.306849] mceusb 2-5:1.0: rx data: 86 7f 7f 7f 7f 7f 7f (length=7)
[ 3137.306852] mceusb 2-5:1.0: Raw IR data, 6 pulse/space samples
[ 3137.306854] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.306857] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.306859] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.306861] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.306863] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.306865] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.306867] mceusb 2-5:1.0: processed IR data
[ 3137.338836] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 24 bytes untransferred
[ 3137.338849] mceusb 2-5:1.0: rx data: 87 7f 7f 1d ff b4 2c 8c (length=8)
[ 3137.338852] mceusb 2-5:1.0: Raw IR data, 7 pulse/space samples
[ 3137.338854] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.338857] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.338859] mceusb 2-5:1.0: Storing space with duration 1450000
[ 3137.338861] mceusb 2-5:1.0: Storing pulse with duration 6350000
[ 3137.338863] mceusb 2-5:1.0: Storing pulse with duration 2600000
[ 3137.338865] mceusb 2-5:1.0: Storing space with duration 2200000
[ 3137.338867] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3137.338870] mceusb 2-5:1.0: processed IR data
[ 3137.370833] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 25 bytes untransferred
[ 3137.370846] mceusb 2-5:1.0: rx data: 86 7f 7f 7f 7f 7f 7f (length=7)
[ 3137.370849] mceusb 2-5:1.0: Raw IR data, 6 pulse/space samples
[ 3137.370852] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.370855] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.370856] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.370858] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.370860] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.370862] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.370864] mceusb 2-5:1.0: processed IR data
[ 3137.402791] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3137.402803] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3137.402806] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3137.402809] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.402811] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.402813] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.402815] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.402818] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.402820] mceusb 2-5:1.0: processed IR data
[ 3137.434831] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 25 bytes untransferred
[ 3137.434844] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 5f (length=6)
[ 3137.434847] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3137.434850] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.434853] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.434855] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.434857] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3137.434858] mceusb 2-5:1.0: Storing space with duration 4750000
[ 3137.434861] mceusb 2-5:1.0: rx data: 85 (length=1)
[ 3137.434863] mceusb 2-5:1.0: End of raw IR data
[ 3137.434870] mceusb 2-5:1.0: processed IR data
[ 3181.432961] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 30 bytes untransferred
[ 3181.432974] mceusb 2-5:1.0: rx data: 81 ff (length=2)
[ 3181.432977] mceusb 2-5:1.0: Raw IR data, 1 pulse/space samples
[ 3181.432979] mceusb 2-5:1.0: Storing pulse with duration 6350000
[ 3181.432982] mceusb 2-5:1.0: processed IR data
[ 3181.464970] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 14 bytes untransferred
[ 3181.464983] mceusb 2-5:1.0: rx data: 91 b5 59 8c 20 8d 0a 8c 20 8c 0b 8c 0a 8c 0a 8c 0a 8c (length=18)
[ 3181.464986] mceusb 2-5:1.0: Raw IR data, 17 pulse/space samples
[ 3181.464989] mceusb 2-5:1.0: Storing pulse with duration 2650000
[ 3181.464991] mceusb 2-5:1.0: Storing space with duration 4450000
[ 3181.464994] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.464996] mceusb 2-5:1.0: Storing space with duration 1600000
[ 3181.464998] mceusb 2-5:1.0: Storing pulse with duration 650000
[ 3181.465000] mceusb 2-5:1.0: Storing space with duration 500000
[ 3181.465002] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.465004] mceusb 2-5:1.0: Storing space with duration 1600000
[ 3181.465006] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.465008] mceusb 2-5:1.0: Storing space with duration 550000
[ 3181.465011] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.465013] mceusb 2-5:1.0: Storing space with duration 500000
[ 3181.465015] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.465017] mceusb 2-5:1.0: Storing space with duration 500000
[ 3181.465019] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.465021] mceusb 2-5:1.0: Storing space with duration 500000
[ 3181.465023] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.465025] mceusb 2-5:1.0: processed IR data
[ 3181.496981] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 1 bytes untransferred
[ 3181.496994] mceusb 2-5:1.0: rx data: 9e 21 8c 0a 8c 0a 8c 0b 8c 0a 8c 21 8b 21 8c 0a 8c 0b 8b 0b 8c 20 8c 21 8c 0a 8c 21 8b 0b 8c (length=31)
[ 3181.496997] mceusb 2-5:1.0: Raw IR data, 30 pulse/space samples
[ 3181.497000] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3181.497003] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.497005] mceusb 2-5:1.0: Storing space with duration 500000
[ 3181.497007] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.497009] mceusb 2-5:1.0: Storing space with duration 500000
[ 3181.497011] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.497014] mceusb 2-5:1.0: Storing space with duration 550000
[ 3181.497016] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.497018] mceusb 2-5:1.0: Storing space with duration 500000
[ 3181.497020] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.497022] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3181.497024] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3181.497026] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3181.497028] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.497030] mceusb 2-5:1.0: Storing space with duration 500000
[ 3181.497032] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.497034] mceusb 2-5:1.0: Storing space with duration 550000
[ 3181.497036] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3181.497039] mceusb 2-5:1.0: Storing space with duration 550000
[ 3181.497041] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.497043] mceusb 2-5:1.0: Storing space with duration 1600000
[ 3181.497045] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.497047] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3181.497049] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.497051] mceusb 2-5:1.0: Storing space with duration 500000
[ 3181.497053] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.497055] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3181.497057] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3181.497059] mceusb 2-5:1.0: Storing space with duration 550000
[ 3181.497061] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.497064] mceusb 2-5:1.0: processed IR data
[ 3181.528964] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 20 bytes untransferred
[ 3181.528977] mceusb 2-5:1.0: rx data: 8b 7f 3d 8c 21 8b 22 8b 7f 7f 7f 7f (length=12)
[ 3181.528979] mceusb 2-5:1.0: Raw IR data, 11 pulse/space samples
[ 3181.528982] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.528985] mceusb 2-5:1.0: Storing space with duration 3050000
[ 3181.528987] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.528990] mceusb 2-5:1.0: Storing space with duration 1650000
[ 3181.528992] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3181.528994] mceusb 2-5:1.0: Storing space with duration 1700000
[ 3181.528996] mceusb 2-5:1.0: Storing pulse with duration 550000
[ 3181.528998] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.529000] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.529002] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.529004] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.529006] mceusb 2-5:1.0: processed IR data
[ 3181.560959] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 23 bytes untransferred
[ 3181.560973] mceusb 2-5:1.0: rx data: 88 7f 7f 7f 29 ff b5 2c 8c (length=9)
[ 3181.560976] mceusb 2-5:1.0: Raw IR data, 8 pulse/space samples
[ 3181.560978] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.560981] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.560983] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.560985] mceusb 2-5:1.0: Storing space with duration 2050000
[ 3181.560987] mceusb 2-5:1.0: Storing pulse with duration 6350000
[ 3181.560989] mceusb 2-5:1.0: Storing pulse with duration 2650000
[ 3181.560991] mceusb 2-5:1.0: Storing space with duration 2200000
[ 3181.560993] mceusb 2-5:1.0: Storing pulse with duration 600000
[ 3181.560995] mceusb 2-5:1.0: processed IR data
[ 3181.592914] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3181.592928] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3181.592932] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3181.592935] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.592939] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.592941] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.592943] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.592945] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.592947] mceusb 2-5:1.0: processed IR data
[ 3181.624895] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3181.624909] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3181.624911] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3181.624914] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.624916] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.624918] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.624920] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.624922] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.624924] mceusb 2-5:1.0: processed IR data
[ 3181.656959] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 26 bytes untransferred
[ 3181.656973] mceusb 2-5:1.0: rx data: 85 7f 7f 7f 7f 7f (length=6)
[ 3181.656976] mceusb 2-5:1.0: Raw IR data, 5 pulse/space samples
[ 3181.656979] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.656981] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.656983] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.656986] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.656988] mceusb 2-5:1.0: Storing space with duration 6350000
[ 3181.656990] mceusb 2-5:1.0: processed IR data
[ 3181.688951] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 32 bytes, 29 bytes untransferred
[ 3181.688965] mceusb 2-5:1.0: rx data: 81 5f (length=2)
[ 3181.688968] mceusb 2-5:1.0: Raw IR data, 1 pulse/space samples
[ 3181.688970] mceusb 2-5:1.0: Storing space with duration 4750000
[ 3181.688974] mceusb 2-5:1.0: rx data: 81 (length=1)
[ 3181.688976] mceusb 2-5:1.0: End of raw IR data
[ 3181.688983] mceusb 2-5:1.0: processed IR data
I'm not sure what to look for... ?
>
> > Endpoint Descriptor:
> > bLength 7
> > bDescriptorType 5
> > bEndpointAddress 0x81 EP 1 IN
> > bmAttributes 3
> > Transfer Type Interrupt
> > Synch Type None
> > Usage Type Data
> > wMaxPacketSize 0x0020 1x 32 bytes
> > bInterval 0
> > Device Status: 0x0001
> > Self Powered
> >
> > -------------------
> >
> > Also, here's a link to a response on the lirc list:
> >
> > https://sourceforge.net/p/lirc/mailman/message/35039126/
>
> That seems suggest that mode2 works but lirc does not. It would be nice
> if that could be narrowed down a bit.
That message above links to some other threads describing the issue.
Here's a post with a patch that supposedly works:
http://www.gossamer-threads.com/lists/mythtv/users/587930
No idea if that's the "correct" way to fix this.
I'll be trying that out and then report back...
Wade
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: mceusb xhci issue?
2016-05-15 2:29 ` Wade Berrier
@ 2016-05-18 14:52 ` Wade Berrier
2016-07-09 14:59 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 17+ messages in thread
From: Wade Berrier @ 2016-05-18 14:52 UTC (permalink / raw)
To: Sean Young; +Cc: linux-media
On May 14 20:29, Wade Berrier wrote:
> On Wed Apr 27 21:07, Sean Young wrote:
> > On Mon, Apr 25, 2016 at 09:16:51PM -0600, Wade Berrier wrote:
> > > On Apr 25 18:15, Sean Young wrote:
> > > > On Sun, Apr 24, 2016 at 10:06:33PM -0600, Wade Berrier wrote:
> > > > > Hello,
> > > > >
> > > > > I have a mceusb compatible transceiver that only seems to work with
> > > > > certain computers. I'm testing this on centos7 (3.10.0) and fedora23
> > > > > (4.4.7).
> > > > >
> > > > > The only difference I can see is that the working computer shows
> > > > > "using uhci_hcd" and the non working shows "using xhci_hcd".
> > > > >
> > > > > Here's the dmesg output of the non-working version:
> > > > >
> > > > > ---------------------
> > > > >
> > > > > [ 217.951079] usb 1-5: new full-speed USB device number 10 using xhci_hcd
> > > > > [ 218.104087] usb 1-5: device descriptor read/64, error -71
> > > > > [ 218.371010] usb 1-5: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32
> > > > > [ 218.371019] usb 1-5: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 32
> > > >
> > > > That's odd. Can you post a "lsusb -vvv" of the device please?
> > > >
> > >
> > > Sure.
> > >
> > > -------------------
> > >
> > > Bus 002 Device 009: ID 1784:0006 TopSeed Technology Corp. eHome Infrared Transceiver
> > > Device Descriptor:
> > > bLength 18
> > > bDescriptorType 1
> > > bcdUSB 2.00
> > > bDeviceClass 0
> > > bDeviceSubClass 0
> > > bDeviceProtocol 0
> > > bMaxPacketSize0 8
> > > idVendor 0x1784 TopSeed Technology Corp.
> > > idProduct 0x0006 eHome Infrared Transceiver
> > > bcdDevice 1.02
> > > iManufacturer 1 TopSeed Technology Corp.
> > > iProduct 2 eHome Infrared Transceiver
> > > iSerial 3 TS004RrP
> > > bNumConfigurations 1
> > > Configuration Descriptor:
> > > bLength 9
> > > bDescriptorType 2
> > > wTotalLength 32
> > > bNumInterfaces 1
> > > bConfigurationValue 1
> > > iConfiguration 0
> > > bmAttributes 0xa0
> > > (Bus Powered)
> > > Remote Wakeup
> > > MaxPower 100mA
> > > Interface Descriptor:
> > > bLength 9
> > > bDescriptorType 4
> > > bInterfaceNumber 0
> > > bAlternateSetting 0
> > > bNumEndpoints 2
> > > bInterfaceClass 255 Vendor Specific Class
> > > bInterfaceSubClass 255 Vendor Specific Subclass
> > > bInterfaceProtocol 255 Vendor Specific Protocol
> > > iInterface 0
> > > Endpoint Descriptor:
> > > bLength 7
> > > bDescriptorType 5
> > > bEndpointAddress 0x01 EP 1 OUT
> > > bmAttributes 3
> > > Transfer Type Interrupt
> > > Synch Type None
> > > Usage Type Data
> > > wMaxPacketSize 0x0020 1x 32 bytes
> > > bInterval 0
> >
> > That's wrong indeed. It might be interesting to see if there is anything
> > in the xhci debug messages with (in Fedora 23):
> >
> > echo "file xhci*.c +p" > /sys/kernel/debug/dynamic_debug/control
> > echo "file mceusb.c +p" > /sys/kernel/debug/dynamic_debug/control
> >
> > And then plug in the receiver, and try to send IR to it with a remote.
> > You should have quite a few kernel messages in the journal.
>
> Here's the output after enabling the debug options, plugging in the
> receiver, running lircd, and pressing some remote buttons:
>
[snip]
>
> I'm not sure what to look for... ?
>
> >
> > > Endpoint Descriptor:
> > > bLength 7
> > > bDescriptorType 5
> > > bEndpointAddress 0x81 EP 1 IN
> > > bmAttributes 3
> > > Transfer Type Interrupt
> > > Synch Type None
> > > Usage Type Data
> > > wMaxPacketSize 0x0020 1x 32 bytes
> > > bInterval 0
> > > Device Status: 0x0001
> > > Self Powered
> > >
> > > -------------------
> > >
> > > Also, here's a link to a response on the lirc list:
> > >
> > > https://sourceforge.net/p/lirc/mailman/message/35039126/
> >
> > That seems suggest that mode2 works but lirc does not. It would be nice
> > if that could be narrowed down a bit.
>
> That message above links to some other threads describing the issue.
> Here's a post with a patch that supposedly works:
>
> http://www.gossamer-threads.com/lists/mythtv/users/587930
>
> No idea if that's the "correct" way to fix this.
>
> I'll be trying that out and then report back...
Indeed, this patch does fix the issue:
----------------------
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 31ccdcc..03321d4 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -247,7 +247,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
/* For low-speed, 10 ms is the official minimum.
* But some "overclocked" devices might want faster
* polling so we'll allow it. */
- n = 32;
+ n = 10;
break;
}
} else if (usb_endpoint_xfer_isoc(d)) {
----------------------
Is this change appropriate to be pushed upstream? Where to go from
here?
Wade
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: mceusb xhci issue?
2016-05-18 14:52 ` Wade Berrier
@ 2016-07-09 14:59 ` Mauro Carvalho Chehab
2016-07-12 15:52 ` Alan Stern
0 siblings, 1 reply; 17+ messages in thread
From: Mauro Carvalho Chehab @ 2016-07-09 14:59 UTC (permalink / raw)
To: Wade Berrier; +Cc: Sean Young, linux-media, linux-usb
C/C linux-usb Mailing list:
Em Wed, 18 May 2016 08:52:28 -0600
Wade Berrier <wberrier@gmail.com> escreveu:
> On May 14 20:29, Wade Berrier wrote:
> > On Wed Apr 27 21:07, Sean Young wrote:
> > > On Mon, Apr 25, 2016 at 09:16:51PM -0600, Wade Berrier wrote:
> > > > On Apr 25 18:15, Sean Young wrote:
> > > > > On Sun, Apr 24, 2016 at 10:06:33PM -0600, Wade Berrier wrote:
> > > > > > Hello,
> > > > > >
> > > > > > I have a mceusb compatible transceiver that only seems to work with
> > > > > > certain computers. I'm testing this on centos7 (3.10.0) and fedora23
> > > > > > (4.4.7).
> > > > > >
> > > > > > The only difference I can see is that the working computer shows
> > > > > > "using uhci_hcd" and the non working shows "using xhci_hcd".
> > > > > >
> > > > > > Here's the dmesg output of the non-working version:
> > > > > >
> > > > > > ---------------------
> > > > > >
> > > > > > [ 217.951079] usb 1-5: new full-speed USB device number 10 using xhci_hcd
> > > > > > [ 218.104087] usb 1-5: device descriptor read/64, error -71
> > > > > > [ 218.371010] usb 1-5: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32
> > > > > > [ 218.371019] usb 1-5: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 32
> > > > >
> > > > > That's odd. Can you post a "lsusb -vvv" of the device please?
> > > > >
> > > >
> > > > Sure.
> > > >
> > > > -------------------
> > > >
> > > > Bus 002 Device 009: ID 1784:0006 TopSeed Technology Corp. eHome Infrared Transceiver
> > > > Device Descriptor:
> > > > bLength 18
> > > > bDescriptorType 1
> > > > bcdUSB 2.00
> > > > bDeviceClass 0
> > > > bDeviceSubClass 0
> > > > bDeviceProtocol 0
> > > > bMaxPacketSize0 8
> > > > idVendor 0x1784 TopSeed Technology Corp.
> > > > idProduct 0x0006 eHome Infrared Transceiver
> > > > bcdDevice 1.02
> > > > iManufacturer 1 TopSeed Technology Corp.
> > > > iProduct 2 eHome Infrared Transceiver
> > > > iSerial 3 TS004RrP
> > > > bNumConfigurations 1
> > > > Configuration Descriptor:
> > > > bLength 9
> > > > bDescriptorType 2
> > > > wTotalLength 32
> > > > bNumInterfaces 1
> > > > bConfigurationValue 1
> > > > iConfiguration 0
> > > > bmAttributes 0xa0
> > > > (Bus Powered)
> > > > Remote Wakeup
> > > > MaxPower 100mA
> > > > Interface Descriptor:
> > > > bLength 9
> > > > bDescriptorType 4
> > > > bInterfaceNumber 0
> > > > bAlternateSetting 0
> > > > bNumEndpoints 2
> > > > bInterfaceClass 255 Vendor Specific Class
> > > > bInterfaceSubClass 255 Vendor Specific Subclass
> > > > bInterfaceProtocol 255 Vendor Specific Protocol
> > > > iInterface 0
> > > > Endpoint Descriptor:
> > > > bLength 7
> > > > bDescriptorType 5
> > > > bEndpointAddress 0x01 EP 1 OUT
> > > > bmAttributes 3
> > > > Transfer Type Interrupt
> > > > Synch Type None
> > > > Usage Type Data
> > > > wMaxPacketSize 0x0020 1x 32 bytes
> > > > bInterval 0
> > >
> > > That's wrong indeed. It might be interesting to see if there is anything
> > > in the xhci debug messages with (in Fedora 23):
> > >
> > > echo "file xhci*.c +p" > /sys/kernel/debug/dynamic_debug/control
> > > echo "file mceusb.c +p" > /sys/kernel/debug/dynamic_debug/control
> > >
> > > And then plug in the receiver, and try to send IR to it with a remote.
> > > You should have quite a few kernel messages in the journal.
> >
> > Here's the output after enabling the debug options, plugging in the
> > receiver, running lircd, and pressing some remote buttons:
> >
>
> [snip]
>
> >
> > I'm not sure what to look for... ?
> >
> > >
> > > > Endpoint Descriptor:
> > > > bLength 7
> > > > bDescriptorType 5
> > > > bEndpointAddress 0x81 EP 1 IN
> > > > bmAttributes 3
> > > > Transfer Type Interrupt
> > > > Synch Type None
> > > > Usage Type Data
> > > > wMaxPacketSize 0x0020 1x 32 bytes
> > > > bInterval 0
> > > > Device Status: 0x0001
> > > > Self Powered
> > > >
> > > > -------------------
> > > >
> > > > Also, here's a link to a response on the lirc list:
> > > >
> > > > https://sourceforge.net/p/lirc/mailman/message/35039126/
> > >
> > > That seems suggest that mode2 works but lirc does not. It would be nice
> > > if that could be narrowed down a bit.
> >
> > That message above links to some other threads describing the issue.
> > Here's a post with a patch that supposedly works:
> >
> > http://www.gossamer-threads.com/lists/mythtv/users/587930
> >
> > No idea if that's the "correct" way to fix this.
> >
> > I'll be trying that out and then report back...
>
> Indeed, this patch does fix the issue:
>
> ----------------------
>
> diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
> index 31ccdcc..03321d4 100644
> --- a/drivers/usb/core/config.c
> +++ b/drivers/usb/core/config.c
> @@ -247,7 +247,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
> /* For low-speed, 10 ms is the official minimum.
> * But some "overclocked" devices might want faster
> * polling so we'll allow it. */
> - n = 32;
> + n = 10;
> break;
> }
> } else if (usb_endpoint_xfer_isoc(d)) {
>
>
> ----------------------
>
> Is this change appropriate to be pushed upstream? Where to go from
> here?
This issue is at the USB core. So, it should be reported to the
linux-usb mailing list.
The people there should help about how to proceed to get this
fixed upstream.
Regards,
Mauro
Thanks,
Mauro
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: mceusb xhci issue?
2016-07-09 14:59 ` Mauro Carvalho Chehab
@ 2016-07-12 15:52 ` Alan Stern
2016-08-11 20:18 ` Alan Stern
2016-09-15 19:37 ` Alan Stern
0 siblings, 2 replies; 17+ messages in thread
From: Alan Stern @ 2016-07-12 15:52 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: Wade Berrier, Sean Young, linux-media, linux-usb
On Sat, 9 Jul 2016, Mauro Carvalho Chehab wrote:
> C/C linux-usb Mailing list:
>
>
> Em Wed, 18 May 2016 08:52:28 -0600
> Wade Berrier <wberrier@gmail.com> escreveu:
...
> > > That message above links to some other threads describing the issue.
> > > Here's a post with a patch that supposedly works:
> > >
> > > http://www.gossamer-threads.com/lists/mythtv/users/587930
> > >
> > > No idea if that's the "correct" way to fix this.
> > >
> > > I'll be trying that out and then report back...
> >
> > Indeed, this patch does fix the issue:
> >
> > ----------------------
> >
> > diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
> > index 31ccdcc..03321d4 100644
> > --- a/drivers/usb/core/config.c
> > +++ b/drivers/usb/core/config.c
> > @@ -247,7 +247,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
> > /* For low-speed, 10 ms is the official minimum.
> > * But some "overclocked" devices might want faster
> > * polling so we'll allow it. */
> > - n = 32;
> > + n = 10;
> > break;
> > }
> > } else if (usb_endpoint_xfer_isoc(d)) {
> >
> >
> > ----------------------
> >
> > Is this change appropriate to be pushed upstream? Where to go from
> > here?
>
> This issue is at the USB core. So, it should be reported to the
> linux-usb mailing list.
>
> The people there should help about how to proceed to get this
> fixed upstream.
Here's a proper version of that patch. If this is okay, it can be
merged.
Alan Stern
Index: usb-4.x/drivers/usb/core/config.c
===================================================================
--- usb-4.x.orig/drivers/usb/core/config.c
+++ usb-4.x/drivers/usb/core/config.c
@@ -213,8 +213,10 @@ static int usb_parse_endpoint(struct dev
memcpy(&endpoint->desc, d, n);
INIT_LIST_HEAD(&endpoint->urb_list);
- /* Fix up bInterval values outside the legal range. Use 32 ms if no
- * proper value can be guessed. */
+ /*
+ * Fix up bInterval values outside the legal range.
+ * Use 10 or 8 ms if no proper value can be guessed.
+ */
i = 0; /* i = min, j = max, n = default */
j = 255;
if (usb_endpoint_xfer_int(d)) {
@@ -223,13 +225,15 @@ static int usb_parse_endpoint(struct dev
case USB_SPEED_SUPER_PLUS:
case USB_SPEED_SUPER:
case USB_SPEED_HIGH:
- /* Many device manufacturers are using full-speed
+ /*
+ * Many device manufacturers are using full-speed
* bInterval values in high-speed interrupt endpoint
* descriptors. Try to fix those and fall back to a
- * 32 ms default value otherwise. */
+ * 8 ms default value otherwise.
+ */
n = fls(d->bInterval*8);
if (n == 0)
- n = 9; /* 32 ms = 2^(9-1) uframes */
+ n = 7; /* 8 ms = 2^(7-1) uframes */
j = 16;
/*
@@ -247,7 +251,7 @@ static int usb_parse_endpoint(struct dev
/* For low-speed, 10 ms is the official minimum.
* But some "overclocked" devices might want faster
* polling so we'll allow it. */
- n = 32;
+ n = 10;
break;
}
} else if (usb_endpoint_xfer_isoc(d)) {
@@ -255,10 +259,10 @@ static int usb_parse_endpoint(struct dev
j = 16;
switch (to_usb_device(ddev)->speed) {
case USB_SPEED_HIGH:
- n = 9; /* 32 ms = 2^(9-1) uframes */
+ n = 7; /* 8 ms = 2^(7-1) uframes */
break;
default: /* USB_SPEED_FULL */
- n = 6; /* 32 ms = 2^(6-1) frames */
+ n = 4; /* 8 ms = 2^(4-1) frames */
break;
}
}
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: mceusb xhci issue?
2016-07-12 15:52 ` Alan Stern
@ 2016-08-11 20:18 ` Alan Stern
2016-09-10 19:58 ` Wade Berrier
2016-09-15 19:37 ` Alan Stern
1 sibling, 1 reply; 17+ messages in thread
From: Alan Stern @ 2016-08-11 20:18 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: Wade Berrier, Sean Young, linux-media, linux-usb
I never received any replies to this message. Should the patch I
suggested be merged?
Alan Stern
On Tue, 12 Jul 2016, Alan Stern wrote:
> On Sat, 9 Jul 2016, Mauro Carvalho Chehab wrote:
>
> > C/C linux-usb Mailing list:
> >
> >
> > Em Wed, 18 May 2016 08:52:28 -0600
> > Wade Berrier <wberrier@gmail.com> escreveu:
>
> ...
>
> > > > That message above links to some other threads describing the issue.
> > > > Here's a post with a patch that supposedly works:
> > > >
> > > > http://www.gossamer-threads.com/lists/mythtv/users/587930
> > > >
> > > > No idea if that's the "correct" way to fix this.
> > > >
> > > > I'll be trying that out and then report back...
> > >
> > > Indeed, this patch does fix the issue:
> > >
> > > ----------------------
> > >
> > > diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
> > > index 31ccdcc..03321d4 100644
> > > --- a/drivers/usb/core/config.c
> > > +++ b/drivers/usb/core/config.c
> > > @@ -247,7 +247,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
> > > /* For low-speed, 10 ms is the official minimum.
> > > * But some "overclocked" devices might want faster
> > > * polling so we'll allow it. */
> > > - n = 32;
> > > + n = 10;
> > > break;
> > > }
> > > } else if (usb_endpoint_xfer_isoc(d)) {
> > >
> > >
> > > ----------------------
> > >
> > > Is this change appropriate to be pushed upstream? Where to go from
> > > here?
> >
> > This issue is at the USB core. So, it should be reported to the
> > linux-usb mailing list.
> >
> > The people there should help about how to proceed to get this
> > fixed upstream.
>
> Here's a proper version of that patch. If this is okay, it can be
> merged.
>
> Alan Stern
>
>
>
> Index: usb-4.x/drivers/usb/core/config.c
> ===================================================================
> --- usb-4.x.orig/drivers/usb/core/config.c
> +++ usb-4.x/drivers/usb/core/config.c
> @@ -213,8 +213,10 @@ static int usb_parse_endpoint(struct dev
> memcpy(&endpoint->desc, d, n);
> INIT_LIST_HEAD(&endpoint->urb_list);
>
> - /* Fix up bInterval values outside the legal range. Use 32 ms if no
> - * proper value can be guessed. */
> + /*
> + * Fix up bInterval values outside the legal range.
> + * Use 10 or 8 ms if no proper value can be guessed.
> + */
> i = 0; /* i = min, j = max, n = default */
> j = 255;
> if (usb_endpoint_xfer_int(d)) {
> @@ -223,13 +225,15 @@ static int usb_parse_endpoint(struct dev
> case USB_SPEED_SUPER_PLUS:
> case USB_SPEED_SUPER:
> case USB_SPEED_HIGH:
> - /* Many device manufacturers are using full-speed
> + /*
> + * Many device manufacturers are using full-speed
> * bInterval values in high-speed interrupt endpoint
> * descriptors. Try to fix those and fall back to a
> - * 32 ms default value otherwise. */
> + * 8 ms default value otherwise.
> + */
> n = fls(d->bInterval*8);
> if (n == 0)
> - n = 9; /* 32 ms = 2^(9-1) uframes */
> + n = 7; /* 8 ms = 2^(7-1) uframes */
> j = 16;
>
> /*
> @@ -247,7 +251,7 @@ static int usb_parse_endpoint(struct dev
> /* For low-speed, 10 ms is the official minimum.
> * But some "overclocked" devices might want faster
> * polling so we'll allow it. */
> - n = 32;
> + n = 10;
> break;
> }
> } else if (usb_endpoint_xfer_isoc(d)) {
> @@ -255,10 +259,10 @@ static int usb_parse_endpoint(struct dev
> j = 16;
> switch (to_usb_device(ddev)->speed) {
> case USB_SPEED_HIGH:
> - n = 9; /* 32 ms = 2^(9-1) uframes */
> + n = 7; /* 8 ms = 2^(7-1) uframes */
> break;
> default: /* USB_SPEED_FULL */
> - n = 6; /* 32 ms = 2^(6-1) frames */
> + n = 4; /* 8 ms = 2^(4-1) frames */
> break;
> }
> }
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: mceusb xhci issue?
2016-08-11 20:18 ` Alan Stern
@ 2016-09-10 19:58 ` Wade Berrier
2016-09-15 19:13 ` Alan Stern
0 siblings, 1 reply; 17+ messages in thread
From: Wade Berrier @ 2016-09-10 19:58 UTC (permalink / raw)
To: Alan Stern; +Cc: Mauro Carvalho Chehab, Sean Young, linux-media, linux-usb
On Thu Aug 11 16:18, Alan Stern wrote:
> I never received any replies to this message. Should the patch I
> suggested be merged?
>
Hello,
I applied this updated patch to the fedora23 4.7.2 kernel and the mceusb
transceiver works as expected.
Thanks,
Wade
>
>
> On Tue, 12 Jul 2016, Alan Stern wrote:
>
> > On Sat, 9 Jul 2016, Mauro Carvalho Chehab wrote:
> >
> > > C/C linux-usb Mailing list:
> > >
> > >
> > > Em Wed, 18 May 2016 08:52:28 -0600
> > > Wade Berrier <wberrier@gmail.com> escreveu:
> >
> > ...
> >
> > > > > That message above links to some other threads describing the issue.
> > > > > Here's a post with a patch that supposedly works:
> > > > >
> > > > > http://www.gossamer-threads.com/lists/mythtv/users/587930
> > > > >
> > > > > No idea if that's the "correct" way to fix this.
> > > > >
> > > > > I'll be trying that out and then report back...
> > > >
> > > > Indeed, this patch does fix the issue:
> > > >
> > > > ----------------------
> > > >
> > > > diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
> > > > index 31ccdcc..03321d4 100644
> > > > --- a/drivers/usb/core/config.c
> > > > +++ b/drivers/usb/core/config.c
> > > > @@ -247,7 +247,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
> > > > /* For low-speed, 10 ms is the official minimum.
> > > > * But some "overclocked" devices might want faster
> > > > * polling so we'll allow it. */
> > > > - n = 32;
> > > > + n = 10;
> > > > break;
> > > > }
> > > > } else if (usb_endpoint_xfer_isoc(d)) {
> > > >
> > > >
> > > > ----------------------
> > > >
> > > > Is this change appropriate to be pushed upstream? Where to go from
> > > > here?
> > >
> > > This issue is at the USB core. So, it should be reported to the
> > > linux-usb mailing list.
> > >
> > > The people there should help about how to proceed to get this
> > > fixed upstream.
> >
> > Here's a proper version of that patch. If this is okay, it can be
> > merged.
> >
> > Alan Stern
> >
> >
> >
> > Index: usb-4.x/drivers/usb/core/config.c
> > ===================================================================
> > --- usb-4.x.orig/drivers/usb/core/config.c
> > +++ usb-4.x/drivers/usb/core/config.c
> > @@ -213,8 +213,10 @@ static int usb_parse_endpoint(struct dev
> > memcpy(&endpoint->desc, d, n);
> > INIT_LIST_HEAD(&endpoint->urb_list);
> >
> > - /* Fix up bInterval values outside the legal range. Use 32 ms if no
> > - * proper value can be guessed. */
> > + /*
> > + * Fix up bInterval values outside the legal range.
> > + * Use 10 or 8 ms if no proper value can be guessed.
> > + */
> > i = 0; /* i = min, j = max, n = default */
> > j = 255;
> > if (usb_endpoint_xfer_int(d)) {
> > @@ -223,13 +225,15 @@ static int usb_parse_endpoint(struct dev
> > case USB_SPEED_SUPER_PLUS:
> > case USB_SPEED_SUPER:
> > case USB_SPEED_HIGH:
> > - /* Many device manufacturers are using full-speed
> > + /*
> > + * Many device manufacturers are using full-speed
> > * bInterval values in high-speed interrupt endpoint
> > * descriptors. Try to fix those and fall back to a
> > - * 32 ms default value otherwise. */
> > + * 8 ms default value otherwise.
> > + */
> > n = fls(d->bInterval*8);
> > if (n == 0)
> > - n = 9; /* 32 ms = 2^(9-1) uframes */
> > + n = 7; /* 8 ms = 2^(7-1) uframes */
> > j = 16;
> >
> > /*
> > @@ -247,7 +251,7 @@ static int usb_parse_endpoint(struct dev
> > /* For low-speed, 10 ms is the official minimum.
> > * But some "overclocked" devices might want faster
> > * polling so we'll allow it. */
> > - n = 32;
> > + n = 10;
> > break;
> > }
> > } else if (usb_endpoint_xfer_isoc(d)) {
> > @@ -255,10 +259,10 @@ static int usb_parse_endpoint(struct dev
> > j = 16;
> > switch (to_usb_device(ddev)->speed) {
> > case USB_SPEED_HIGH:
> > - n = 9; /* 32 ms = 2^(9-1) uframes */
> > + n = 7; /* 8 ms = 2^(7-1) uframes */
> > break;
> > default: /* USB_SPEED_FULL */
> > - n = 6; /* 32 ms = 2^(6-1) frames */
> > + n = 4; /* 8 ms = 2^(4-1) frames */
> > break;
> > }
> > }
>
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: mceusb xhci issue?
2016-09-10 19:58 ` Wade Berrier
@ 2016-09-15 19:13 ` Alan Stern
2016-09-15 22:48 ` Wade Berrier
0 siblings, 1 reply; 17+ messages in thread
From: Alan Stern @ 2016-09-15 19:13 UTC (permalink / raw)
To: Wade Berrier; +Cc: Mauro Carvalho Chehab, Sean Young, linux-media, linux-usb
On Sat, 10 Sep 2016, Wade Berrier wrote:
> On Thu Aug 11 16:18, Alan Stern wrote:
> > I never received any replies to this message. Should the patch I
> > suggested be merged?
> >
>
> Hello,
>
> I applied this updated patch to the fedora23 4.7.2 kernel and the mceusb
> transceiver works as expected.
Thank you for testing. Can you provide the "lsusb -v" output for the
troublesome IR transceiver?
Alan Stern
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: mceusb xhci issue?
2016-07-12 15:52 ` Alan Stern
2016-08-11 20:18 ` Alan Stern
@ 2016-09-15 19:37 ` Alan Stern
1 sibling, 0 replies; 17+ messages in thread
From: Alan Stern @ 2016-09-15 19:37 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: Wade Berrier, Sean Young, linux-media, linux-usb
Mauro:
I just took a look at the mceusb.c source file under drivers/media/rc/.
The probe routine checks that ep_in != NULL, but it doesn't check
ep_out. This can lead to a NULL-pointer dereference later on, crashing
the driver. Such a crash was reported here:
http://marc.info/?l=mythtv-users&m=144131333703197&w=2
You should a check for ep_out to the probe routine.
Alan Stern
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: mceusb xhci issue?
2016-09-15 19:13 ` Alan Stern
@ 2016-09-15 22:48 ` Wade Berrier
2016-09-16 14:24 ` [PATCH] USB: change bInterval default to 10 ms Alan Stern
2016-09-16 14:25 ` mceusb xhci issue? Alan Stern
0 siblings, 2 replies; 17+ messages in thread
From: Wade Berrier @ 2016-09-15 22:48 UTC (permalink / raw)
To: Alan Stern; +Cc: Mauro Carvalho Chehab, Sean Young, linux-media, linux-usb
On Thu Sep 15 15:13, Alan Stern wrote:
> On Sat, 10 Sep 2016, Wade Berrier wrote:
>
> > On Thu Aug 11 16:18, Alan Stern wrote:
> > > I never received any replies to this message. Should the patch I
> > > suggested be merged?
> > >
> >
> > Hello,
> >
> > I applied this updated patch to the fedora23 4.7.2 kernel and the mceusb
> > transceiver works as expected.
>
> Thank you for testing. Can you provide the "lsusb -v" output for the
> troublesome IR transceiver?
>
Here's the output:
Bus 001 Device 006: ID 1784:0006 TopSeed Technology Corp. eHome Infrared Transceiver
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1784 TopSeed Technology Corp.
idProduct 0x0006 eHome Infrared Transceiver
bcdDevice 1.02
iManufacturer 1 TopSeed Technology Corp.
iProduct 2 eHome Infrared Transceiver
iSerial 3 TS004RrP
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Device Status: 0x0001
Self Powered
Wade
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH] USB: change bInterval default to 10 ms
2016-09-15 22:48 ` Wade Berrier
@ 2016-09-16 14:24 ` Alan Stern
2016-09-16 15:02 ` Mauro Carvalho Chehab
2016-09-16 14:25 ` mceusb xhci issue? Alan Stern
1 sibling, 1 reply; 17+ messages in thread
From: Alan Stern @ 2016-09-16 14:24 UTC (permalink / raw)
To: Greg KH
Cc: Wade Berrier, Mauro Carvalho Chehab, Sean Young, linux-media, USB list
Some full-speed mceusb infrared transceivers contain invalid endpoint
descriptors for their interrupt endpoints, with bInterval set to 0.
In the past they have worked out okay with the mceusb driver, because
the driver sets the bInterval field in the descriptor to 1,
overwriting whatever value may have been there before. However, this
approach was never sanctioned by the USB core, and in fact it does not
work with xHCI controllers, because they use the bInterval value that
was present when the configuration was installed.
Currently usbcore uses 32 ms as the default interval if the value in
the endpoint descriptor is invalid. It turns out that these IR
transceivers don't work properly unless the interval is set to 10 ms
or below. To work around this mceusb problem, this patch changes the
endpoint-descriptor parsing routine, making the default interval value
be 10 ms rather than 32 ms.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Wade Berrier <wberrier@gmail.com>
CC: <stable@vger.kernel.org>
---
[as1812]
drivers/usb/core/config.c | 28 +++++++++++++++++-----------
1 file changed, 17 insertions(+), 11 deletions(-)
Index: usb-4.x/drivers/usb/core/config.c
===================================================================
--- usb-4.x.orig/drivers/usb/core/config.c
+++ usb-4.x/drivers/usb/core/config.c
@@ -240,8 +240,10 @@ static int usb_parse_endpoint(struct dev
memcpy(&endpoint->desc, d, n);
INIT_LIST_HEAD(&endpoint->urb_list);
- /* Fix up bInterval values outside the legal range. Use 32 ms if no
- * proper value can be guessed. */
+ /*
+ * Fix up bInterval values outside the legal range.
+ * Use 10 or 8 ms if no proper value can be guessed.
+ */
i = 0; /* i = min, j = max, n = default */
j = 255;
if (usb_endpoint_xfer_int(d)) {
@@ -250,13 +252,15 @@ static int usb_parse_endpoint(struct dev
case USB_SPEED_SUPER_PLUS:
case USB_SPEED_SUPER:
case USB_SPEED_HIGH:
- /* Many device manufacturers are using full-speed
+ /*
+ * Many device manufacturers are using full-speed
* bInterval values in high-speed interrupt endpoint
- * descriptors. Try to fix those and fall back to a
- * 32 ms default value otherwise. */
+ * descriptors. Try to fix those and fall back to an
+ * 8-ms default value otherwise.
+ */
n = fls(d->bInterval*8);
if (n == 0)
- n = 9; /* 32 ms = 2^(9-1) uframes */
+ n = 7; /* 8 ms = 2^(7-1) uframes */
j = 16;
/*
@@ -271,10 +275,12 @@ static int usb_parse_endpoint(struct dev
}
break;
default: /* USB_SPEED_FULL or _LOW */
- /* For low-speed, 10 ms is the official minimum.
+ /*
+ * For low-speed, 10 ms is the official minimum.
* But some "overclocked" devices might want faster
- * polling so we'll allow it. */
- n = 32;
+ * polling so we'll allow it.
+ */
+ n = 10;
break;
}
} else if (usb_endpoint_xfer_isoc(d)) {
@@ -282,10 +288,10 @@ static int usb_parse_endpoint(struct dev
j = 16;
switch (to_usb_device(ddev)->speed) {
case USB_SPEED_HIGH:
- n = 9; /* 32 ms = 2^(9-1) uframes */
+ n = 7; /* 8 ms = 2^(7-1) uframes */
break;
default: /* USB_SPEED_FULL */
- n = 6; /* 32 ms = 2^(6-1) frames */
+ n = 4; /* 8 ms = 2^(4-1) frames */
break;
}
}
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: mceusb xhci issue?
2016-09-15 22:48 ` Wade Berrier
2016-09-16 14:24 ` [PATCH] USB: change bInterval default to 10 ms Alan Stern
@ 2016-09-16 14:25 ` Alan Stern
2016-09-16 15:03 ` Mauro Carvalho Chehab
1 sibling, 1 reply; 17+ messages in thread
From: Alan Stern @ 2016-09-16 14:25 UTC (permalink / raw)
To: Wade Berrier; +Cc: Mauro Carvalho Chehab, Sean Young, linux-media, linux-usb
On Thu, 15 Sep 2016, Wade Berrier wrote:
> On Thu Sep 15 15:13, Alan Stern wrote:
> > On Sat, 10 Sep 2016, Wade Berrier wrote:
> >
> > > On Thu Aug 11 16:18, Alan Stern wrote:
> > > > I never received any replies to this message. Should the patch I
> > > > suggested be merged?
> > > >
> > >
> > > Hello,
> > >
> > > I applied this updated patch to the fedora23 4.7.2 kernel and the mceusb
> > > transceiver works as expected.
> >
> > Thank you for testing. Can you provide the "lsusb -v" output for the
> > troublesome IR transceiver?
> >
>
> Here's the output:
>
> Bus 001 Device 006: ID 1784:0006 TopSeed Technology Corp. eHome Infrared Transceiver
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 8
> idVendor 0x1784 TopSeed Technology Corp.
> idProduct 0x0006 eHome Infrared Transceiver
> bcdDevice 1.02
> iManufacturer 1 TopSeed Technology Corp.
> iProduct 2 eHome Infrared Transceiver
> iSerial 3 TS004RrP
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 32
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xa0
> (Bus Powered)
> Remote Wakeup
> MaxPower 100mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 EP 1 OUT
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0020 1x 32 bytes
> bInterval 0
And there's the problem. 0 is an invalid bInterval value for an
Interrupt endpoint.
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0020 1x 32 bytes
> bInterval 0
Here too.
> Device Status: 0x0001
> Self Powered
>
> Wade
Thank you. The patch has been submitted.
Alan Stern
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH] USB: change bInterval default to 10 ms
2016-09-16 14:24 ` [PATCH] USB: change bInterval default to 10 ms Alan Stern
@ 2016-09-16 15:02 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 17+ messages in thread
From: Mauro Carvalho Chehab @ 2016-09-16 15:02 UTC (permalink / raw)
To: Alan Stern; +Cc: Greg KH, Wade Berrier, Sean Young, linux-media, USB list
Em Fri, 16 Sep 2016 10:24:26 -0400 (EDT)
Alan Stern <stern@rowland.harvard.edu> escreveu:
> Some full-speed mceusb infrared transceivers contain invalid endpoint
> descriptors for their interrupt endpoints, with bInterval set to 0.
> In the past they have worked out okay with the mceusb driver, because
> the driver sets the bInterval field in the descriptor to 1,
> overwriting whatever value may have been there before. However, this
> approach was never sanctioned by the USB core, and in fact it does not
> work with xHCI controllers, because they use the bInterval value that
> was present when the configuration was installed.
>
> Currently usbcore uses 32 ms as the default interval if the value in
> the endpoint descriptor is invalid. It turns out that these IR
> transceivers don't work properly unless the interval is set to 10 ms
> or below. To work around this mceusb problem, this patch changes the
> endpoint-descriptor parsing routine, making the default interval value
> be 10 ms rather than 32 ms.
>
> Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
> Tested-by: Wade Berrier <wberrier@gmail.com>
> CC: <stable@vger.kernel.org>
Acked-by: Mauro Carvalho Chehab <m.chehab@s-opensource.com>
>
> ---
>
>
> [as1812]
>
>
> drivers/usb/core/config.c | 28 +++++++++++++++++-----------
> 1 file changed, 17 insertions(+), 11 deletions(-)
>
> Index: usb-4.x/drivers/usb/core/config.c
> ===================================================================
> --- usb-4.x.orig/drivers/usb/core/config.c
> +++ usb-4.x/drivers/usb/core/config.c
> @@ -240,8 +240,10 @@ static int usb_parse_endpoint(struct dev
> memcpy(&endpoint->desc, d, n);
> INIT_LIST_HEAD(&endpoint->urb_list);
>
> - /* Fix up bInterval values outside the legal range. Use 32 ms if no
> - * proper value can be guessed. */
> + /*
> + * Fix up bInterval values outside the legal range.
> + * Use 10 or 8 ms if no proper value can be guessed.
> + */
> i = 0; /* i = min, j = max, n = default */
> j = 255;
> if (usb_endpoint_xfer_int(d)) {
> @@ -250,13 +252,15 @@ static int usb_parse_endpoint(struct dev
> case USB_SPEED_SUPER_PLUS:
> case USB_SPEED_SUPER:
> case USB_SPEED_HIGH:
> - /* Many device manufacturers are using full-speed
> + /*
> + * Many device manufacturers are using full-speed
> * bInterval values in high-speed interrupt endpoint
> - * descriptors. Try to fix those and fall back to a
> - * 32 ms default value otherwise. */
> + * descriptors. Try to fix those and fall back to an
> + * 8-ms default value otherwise.
> + */
> n = fls(d->bInterval*8);
> if (n == 0)
> - n = 9; /* 32 ms = 2^(9-1) uframes */
> + n = 7; /* 8 ms = 2^(7-1) uframes */
> j = 16;
>
> /*
> @@ -271,10 +275,12 @@ static int usb_parse_endpoint(struct dev
> }
> break;
> default: /* USB_SPEED_FULL or _LOW */
> - /* For low-speed, 10 ms is the official minimum.
> + /*
> + * For low-speed, 10 ms is the official minimum.
> * But some "overclocked" devices might want faster
> - * polling so we'll allow it. */
> - n = 32;
> + * polling so we'll allow it.
> + */
> + n = 10;
> break;
> }
> } else if (usb_endpoint_xfer_isoc(d)) {
> @@ -282,10 +288,10 @@ static int usb_parse_endpoint(struct dev
> j = 16;
> switch (to_usb_device(ddev)->speed) {
> case USB_SPEED_HIGH:
> - n = 9; /* 32 ms = 2^(9-1) uframes */
> + n = 7; /* 8 ms = 2^(7-1) uframes */
> break;
> default: /* USB_SPEED_FULL */
> - n = 6; /* 32 ms = 2^(6-1) frames */
> + n = 4; /* 8 ms = 2^(4-1) frames */
> break;
> }
> }
>
Thanks,
Mauro
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: mceusb xhci issue?
2016-09-16 14:25 ` mceusb xhci issue? Alan Stern
@ 2016-09-16 15:03 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 17+ messages in thread
From: Mauro Carvalho Chehab @ 2016-09-16 15:03 UTC (permalink / raw)
To: Alan Stern; +Cc: Wade Berrier, Sean Young, linux-media, linux-usb
Em Fri, 16 Sep 2016 10:25:31 -0400 (EDT)
Alan Stern <stern@rowland.harvard.edu> escreveu:
> On Thu, 15 Sep 2016, Wade Berrier wrote:
>
> > On Thu Sep 15 15:13, Alan Stern wrote:
> > > On Sat, 10 Sep 2016, Wade Berrier wrote:
> > >
> > > > On Thu Aug 11 16:18, Alan Stern wrote:
> > > > > I never received any replies to this message. Should the patch I
> > > > > suggested be merged?
> > > > >
> > > >
> > > > Hello,
> > > >
> > > > I applied this updated patch to the fedora23 4.7.2 kernel and the mceusb
> > > > transceiver works as expected.
> > >
> > > Thank you for testing. Can you provide the "lsusb -v" output for the
> > > troublesome IR transceiver?
> > >
> >
> > Here's the output:
> >
> > Bus 001 Device 006: ID 1784:0006 TopSeed Technology Corp. eHome Infrared Transceiver
> > Device Descriptor:
> > bLength 18
> > bDescriptorType 1
> > bcdUSB 2.00
> > bDeviceClass 0
> > bDeviceSubClass 0
> > bDeviceProtocol 0
> > bMaxPacketSize0 8
> > idVendor 0x1784 TopSeed Technology Corp.
> > idProduct 0x0006 eHome Infrared Transceiver
> > bcdDevice 1.02
> > iManufacturer 1 TopSeed Technology Corp.
> > iProduct 2 eHome Infrared Transceiver
> > iSerial 3 TS004RrP
> > bNumConfigurations 1
> > Configuration Descriptor:
> > bLength 9
> > bDescriptorType 2
> > wTotalLength 32
> > bNumInterfaces 1
> > bConfigurationValue 1
> > iConfiguration 0
> > bmAttributes 0xa0
> > (Bus Powered)
> > Remote Wakeup
> > MaxPower 100mA
> > Interface Descriptor:
> > bLength 9
> > bDescriptorType 4
> > bInterfaceNumber 0
> > bAlternateSetting 0
> > bNumEndpoints 2
> > bInterfaceClass 255 Vendor Specific Class
> > bInterfaceSubClass 255 Vendor Specific Subclass
> > bInterfaceProtocol 255 Vendor Specific Protocol
> > iInterface 0
> > Endpoint Descriptor:
> > bLength 7
> > bDescriptorType 5
> > bEndpointAddress 0x01 EP 1 OUT
> > bmAttributes 3
> > Transfer Type Interrupt
> > Synch Type None
> > Usage Type Data
> > wMaxPacketSize 0x0020 1x 32 bytes
> > bInterval 0
>
> And there's the problem. 0 is an invalid bInterval value for an
> Interrupt endpoint.
Unfortunately, it is a know issue that some mceusb drivers have the
bInterval set to zero.
> > Device Status: 0x0001
> > Self Powered
> >
> > Wade
>
> Thank you. The patch has been submitted.
Thanks!
Mauro
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2016-09-16 15:03 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-25 4:06 mceusb xhci issue? Wade Berrier
2016-04-25 17:15 ` Sean Young
2016-04-26 3:16 ` Wade Berrier
2016-04-27 20:07 ` Sean Young
2016-05-15 2:29 ` Wade Berrier
2016-05-18 14:52 ` Wade Berrier
2016-07-09 14:59 ` Mauro Carvalho Chehab
2016-07-12 15:52 ` Alan Stern
2016-08-11 20:18 ` Alan Stern
2016-09-10 19:58 ` Wade Berrier
2016-09-15 19:13 ` Alan Stern
2016-09-15 22:48 ` Wade Berrier
2016-09-16 14:24 ` [PATCH] USB: change bInterval default to 10 ms Alan Stern
2016-09-16 15:02 ` Mauro Carvalho Chehab
2016-09-16 14:25 ` mceusb xhci issue? Alan Stern
2016-09-16 15:03 ` Mauro Carvalho Chehab
2016-09-15 19:37 ` Alan Stern
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).