From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Linux Media Mailing List <linux-media@vger.kernel.org>
Subject: Re: [GIT PULL FOR v4.18] v2: Various fixes/improvements
Date: Thu, 22 Nov 2018 18:52:07 -0200 [thread overview]
Message-ID: <20181122185207.3e50acb1@coco.lan> (raw)
In-Reply-To: <b9c05ebb-6cb3-d6b3-f2e4-48720f3a05bd@xs4all.nl>
Em Tue, 8 May 2018 12:48:45 +0200
Hans Verkuil <hverkuil@xs4all.nl> escreveu:
> Fixes/improvements all over the place.
>
> Changes since v1:
>
> Replaced "media: media-device: fix ioctl function types" with the v2 version
> of that patch. My fault, I missed Sakari's request for a change of v1.
You should seriously review how you're adding SOBs... there are
even some like:
Signed-off-by Hans Verkuil <hans.verkuil>
Reported-by: syzbot+69780d144754b8071f4b@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # for v4.20 and up
Signed-off-by Hans Verkuil <hansverk@cisco.com>
On this series. Again, none matching the Author's email.
PS.: one quick way to fix it is by using git filter.
You could do something like:
$ git filter-branch -f --msg-filter 'cat|grep -v "Signed-off-by: Your Name"; echo "Signed-off-by: Your Name <your.new@email>"' origin/master..
And fix all of them with a single command.
>
> Regards,
>
> Hans
>
> The following changes since commit f10379aad39e9da8bc7d1822e251b5f0673067ef:
>
> media: include/video/omapfb_dss.h: use IS_ENABLED() (2018-05-05 11:45:51 -0400)
>
> are available in the Git repository at:
>
> git://linuxtv.org/hverkuil/media_tree.git for-v4.18b
>
> for you to fetch changes up to 171d364998d1e2373c12b93924fe63cc71586101:
>
> media: media-device: fix ioctl function types (2018-05-08 12:40:23 +0200)
>
> ----------------------------------------------------------------
> Arvind Yadav (2):
> platform: Use gpio_is_valid()
> sta2x11: Use gpio_is_valid() and remove unnecessary check
>
> Brad Love (4):
> em28xx: Fix DualHD broken second tuner
> intel-ipu3: Kconfig coding style issue
> cec: Kconfig coding style issue
> saa7164: Fix driver name in debug output
>
> Colin Ian King (1):
> media/usbvision: fix spelling mistake: "compresion" -> "compression"
>
> Dan Carpenter (1):
> media: vpbe_venc: potential uninitialized variable in ven_sub_dev_init()
>
> Fengguang Wu (1):
> media: vcodec: fix ptr_ret.cocci warnings
>
> Hans Verkuil (2):
> cec-gpio: use GPIOD_OUT_HIGH_OPEN_DRAIN
> v4l2-dev.h: fix doc warning
>
> Jacopo Mondi (1):
> media: renesas-ceu: Set mbus_fmt on subdev operations
>
> Jan Luebbe (1):
> media: imx-csi: fix burst size for 16 bit
>
> Jasmin Jessich (2):
> media: Use ktime_set() in pt1.c
> media: Revert cleanup ktime_set() usage
>
> Julia Lawall (1):
> pvrusb2: delete unneeded include
>
> Niklas Söderlund (1):
> media: entity: fix spelling for media_entity_get_fwnode_pad()
>
> Philipp Zabel (4):
> media: coda: reuse coda_s_fmt_vid_cap to propagate format in coda_s_fmt_vid_out
> media: coda: do not try to propagate format if capture queue busy
> media: coda: set colorimetry on coded queue
> media: imx: add 16-bit grayscale support
>
> Robin Murphy (1):
> media: videobuf-dma-sg: Fix dma_{sync,unmap}_sg() calls
>
> Sami Tolvanen (1):
> media: media-device: fix ioctl function types
>
> Simon Que (1):
> v4l2-core: Rename array 'video_driver' to 'video_drivers'
>
> Souptick Joarder (1):
> videobuf: Change return type to vm_fault_t
>
> Wolfram Sang (1):
> media: platform: am437x: simplify getting .drvdata
>
> drivers/media/Kconfig | 12 ++++++------
> drivers/media/dvb-core/dmxdev.c | 2 +-
> drivers/media/media-device.c | 21 +++++++++++----------
> drivers/media/pci/cx88/cx88-input.c | 6 ++++--
> drivers/media/pci/intel/ipu3/Kconfig | 12 ++++++------
> drivers/media/pci/pt1/pt1.c | 2 +-
> drivers/media/pci/pt3/pt3.c | 2 +-
> drivers/media/pci/saa7164/saa7164-fw.c | 3 ++-
> drivers/media/pci/sta2x11/sta2x11_vip.c | 31 +++++++++++++++----------------
> drivers/media/platform/am437x/am437x-vpfe.c | 6 ++----
> drivers/media/platform/cec-gpio/cec-gpio.c | 2 +-
> drivers/media/platform/coda/coda-common.c | 45 +++++++++++++++++++++++++++++++--------------
> drivers/media/platform/davinci/vpbe_venc.c | 2 +-
> drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 5 +----
> drivers/media/platform/renesas-ceu.c | 20 +++++++++++++++-----
> drivers/media/platform/via-camera.c | 2 +-
> drivers/media/usb/em28xx/em28xx-dvb.c | 2 +-
> drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c | 1 -
> drivers/media/usb/usbvision/usbvision-core.c | 2 +-
> drivers/media/v4l2-core/v4l2-dev.c | 22 +++++++++++-----------
> drivers/media/v4l2-core/videobuf-dma-sg.c | 6 +++---
> drivers/staging/media/imx/imx-media-csi.c | 3 ++-
> drivers/staging/media/imx/imx-media-utils.c | 9 +++++++++
> include/media/media-entity.h | 2 +-
> include/media/v4l2-dev.h | 1 +
> 25 files changed, 128 insertions(+), 93 deletions(-)
Thanks,
Mauro
next prev parent reply other threads:[~2018-11-23 7:33 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-08 10:48 [GIT PULL FOR v4.18] v2: Various fixes/improvements Hans Verkuil
2018-11-22 20:52 ` Mauro Carvalho Chehab [this message]
2018-11-22 22:26 ` Hans Verkuil
2018-11-22 22:43 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181122185207.3e50acb1@coco.lan \
--to=mchehab+samsung@kernel.org \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).