* [PATCH v4 0/5] ov7670 fixes
@ 2019-01-15 8:54 Lubomir Rintel
2019-01-15 8:54 ` [PATCH v4 1/5] ov7670: Remove useless use of a ret variable Lubomir Rintel
` (5 more replies)
0 siblings, 6 replies; 10+ messages in thread
From: Lubomir Rintel @ 2019-01-15 8:54 UTC (permalink / raw)
To: Sakari Ailus; +Cc: linux-media, linux-kernel
Hi,
here are the ov7670 patches originally from the "media: make Marvell camera
work on DT-based OLPC XO-1.75" updated to apply cleanly on top of
<git://linuxtv.org/sailus/media_tree.git> master as requested.
I've also added "ov7670: Remove useless use of a ret variable" with my Ack
slapped on it.
Lubo
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v4 1/5] ov7670: Remove useless use of a ret variable
2019-01-15 8:54 [PATCH v4 0/5] ov7670 fixes Lubomir Rintel
@ 2019-01-15 8:54 ` Lubomir Rintel
2019-01-15 8:54 ` [PATCH v4 2/5] media: ov7670: hook s_power onto v4l2 core Lubomir Rintel
` (4 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Lubomir Rintel @ 2019-01-15 8:54 UTC (permalink / raw)
To: Sakari Ailus; +Cc: linux-media, linux-kernel, Sakari Ailus, Lubomir Rintel
From: Sakari Ailus <sakari.ailus@linux.intel.com>
Instead of assigning the return value to ret and then checking and
returning it, just return the value to the caller directly. The success
value is always 0.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
---
drivers/media/i2c/ov7670.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index 4939a83b50e4..61c47c61c693 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -859,11 +859,7 @@ static int ov7675_set_framerate(struct v4l2_subdev *sd,
/* Recalculate frame rate */
ov7675_get_framerate(sd, tpf);
- ret = ov7670_write(sd, REG_CLKRC, info->clkrc);
- if (ret < 0)
- return ret;
-
- return 0;
+ return ov7670_write(sd, REG_CLKRC, info->clkrc);
}
static void ov7670_get_framerate_legacy(struct v4l2_subdev *sd,
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 2/5] media: ov7670: hook s_power onto v4l2 core
2019-01-15 8:54 [PATCH v4 0/5] ov7670 fixes Lubomir Rintel
2019-01-15 8:54 ` [PATCH v4 1/5] ov7670: Remove useless use of a ret variable Lubomir Rintel
@ 2019-01-15 8:54 ` Lubomir Rintel
2019-01-15 8:54 ` [PATCH v4 3/5] media: ov7670: control clock along with power Lubomir Rintel
` (3 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Lubomir Rintel @ 2019-01-15 8:54 UTC (permalink / raw)
To: Sakari Ailus; +Cc: linux-media, linux-kernel, Lubomir Rintel, Sakari Ailus
The commit 71862f63f351 ("media: ov7670: Add the ov7670_s_power function")
added a power control routing. However, it was not good enough to use as
a s_power() callback: it merely flipped on the power GPIOs without
restoring the register settings.
Fix this now and register an actual power callback.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/i2c/ov7670.c | 50 +++++++++++++++++++++++++++++++++-----
1 file changed, 44 insertions(+), 6 deletions(-)
diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index 61c47c61c693..4679aa9dc430 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -242,6 +242,7 @@ struct ov7670_info {
struct v4l2_mbus_framefmt format;
struct ov7670_format_struct *fmt; /* Current format */
struct clk *clk;
+ int on;
struct gpio_desc *resetb_gpio;
struct gpio_desc *pwdn_gpio;
unsigned int mbus_config; /* Media bus configuration flags */
@@ -1603,19 +1604,54 @@ static int ov7670_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_regis
}
#endif
-static int ov7670_s_power(struct v4l2_subdev *sd, int on)
+static void ov7670_power_on(struct v4l2_subdev *sd)
{
struct ov7670_info *info = to_state(sd);
+ if (info->on)
+ return;
+
if (info->pwdn_gpio)
- gpiod_set_value(info->pwdn_gpio, !on);
- if (on && info->resetb_gpio) {
+ gpiod_set_value(info->pwdn_gpio, 0);
+ if (info->resetb_gpio) {
gpiod_set_value(info->resetb_gpio, 1);
usleep_range(500, 1000);
gpiod_set_value(info->resetb_gpio, 0);
usleep_range(3000, 5000);
}
+ info->on = true;
+}
+
+static void ov7670_power_off(struct v4l2_subdev *sd)
+{
+ struct ov7670_info *info = to_state(sd);
+
+ if (!info->on)
+ return;
+
+ if (info->pwdn_gpio)
+ gpiod_set_value(info->pwdn_gpio, 1);
+
+ info->on = false;
+}
+
+static int ov7670_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct ov7670_info *info = to_state(sd);
+
+ if (info->on == on)
+ return 0;
+
+ if (on) {
+ ov7670_power_on (sd);
+ ov7670_apply_fmt(sd);
+ ov7675_apply_framerate(sd);
+ v4l2_ctrl_handler_setup(&info->hdl);
+ } else {
+ ov7670_power_off (sd);
+ }
+
return 0;
}
@@ -1648,6 +1684,7 @@ static int ov7670_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
static const struct v4l2_subdev_core_ops ov7670_core_ops = {
.reset = ov7670_reset,
.init = ov7670_init,
+ .s_power = ov7670_s_power,
.log_status = v4l2_ctrl_subdev_log_status,
.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
@@ -1812,6 +1849,7 @@ static int ov7670_probe(struct i2c_client *client,
else
return ret;
}
+
if (info->clk) {
ret = clk_prepare_enable(info->clk);
if (ret)
@@ -1828,7 +1866,7 @@ static int ov7670_probe(struct i2c_client *client,
if (ret)
goto clk_disable;
- ov7670_s_power(sd, 1);
+ ov7670_power_on(sd);
/* Make sure it's an ov7670 */
ret = ov7670_detect(sd);
@@ -1915,7 +1953,7 @@ static int ov7670_probe(struct i2c_client *client,
hdl_free:
v4l2_ctrl_handler_free(&info->hdl);
power_off:
- ov7670_s_power(sd, 0);
+ ov7670_power_off(sd);
clk_disable:
clk_disable_unprepare(info->clk);
return ret;
@@ -1931,7 +1969,7 @@ static int ov7670_remove(struct i2c_client *client)
v4l2_ctrl_handler_free(&info->hdl);
clk_disable_unprepare(info->clk);
media_entity_cleanup(&info->sd.entity);
- ov7670_s_power(sd, 0);
+ ov7670_power_off(sd);
return 0;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 3/5] media: ov7670: control clock along with power
2019-01-15 8:54 [PATCH v4 0/5] ov7670 fixes Lubomir Rintel
2019-01-15 8:54 ` [PATCH v4 1/5] ov7670: Remove useless use of a ret variable Lubomir Rintel
2019-01-15 8:54 ` [PATCH v4 2/5] media: ov7670: hook s_power onto v4l2 core Lubomir Rintel
@ 2019-01-15 8:54 ` Lubomir Rintel
2019-01-15 8:54 ` [PATCH v4 4/5] media: ov7670: split register setting from set_fmt() logic Lubomir Rintel
` (2 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Lubomir Rintel @ 2019-01-15 8:54 UTC (permalink / raw)
To: Sakari Ailus; +Cc: linux-media, linux-kernel, Lubomir Rintel, Sakari Ailus
This provides more power saving when the sensor is off.
While at that, do the delay on power/clock enable even if the sensor driver
itself doesn't control the GPIOs. This is required for the OLPC XO-1
platform, that lacks the proper power/reset properties in its DT, but
needs the delay after the sensor is clocked up.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/i2c/ov7670.c | 30 ++++++++++++++----------------
1 file changed, 14 insertions(+), 16 deletions(-)
diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index 4679aa9dc430..93c055502bb9 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -1611,14 +1611,17 @@ static void ov7670_power_on(struct v4l2_subdev *sd)
if (info->on)
return;
+ clk_prepare_enable(info->clk);
+
if (info->pwdn_gpio)
gpiod_set_value(info->pwdn_gpio, 0);
if (info->resetb_gpio) {
gpiod_set_value(info->resetb_gpio, 1);
usleep_range(500, 1000);
gpiod_set_value(info->resetb_gpio, 0);
- usleep_range(3000, 5000);
}
+ if (info->pwdn_gpio || info->resetb_gpio || info->clk)
+ usleep_range(3000, 5000);
info->on = true;
}
@@ -1630,6 +1633,8 @@ static void ov7670_power_off(struct v4l2_subdev *sd)
if (!info->on)
return;
+ clk_disable_unprepare(info->clk);
+
if (info->pwdn_gpio)
gpiod_set_value(info->pwdn_gpio, 1);
@@ -1850,24 +1855,20 @@ static int ov7670_probe(struct i2c_client *client,
return ret;
}
- if (info->clk) {
- ret = clk_prepare_enable(info->clk);
- if (ret)
- return ret;
+ ret = ov7670_init_gpio(client, info);
+ if (ret)
+ return ret;
+ ov7670_power_on(sd);
+
+ if (info->clk) {
info->clock_speed = clk_get_rate(info->clk) / 1000000;
if (info->clock_speed < 10 || info->clock_speed > 48) {
ret = -EINVAL;
- goto clk_disable;
+ goto power_off;
}
}
- ret = ov7670_init_gpio(client, info);
- if (ret)
- goto clk_disable;
-
- ov7670_power_on(sd);
-
/* Make sure it's an ov7670 */
ret = ov7670_detect(sd);
if (ret) {
@@ -1946,6 +1947,7 @@ static int ov7670_probe(struct i2c_client *client,
if (ret < 0)
goto entity_cleanup;
+ ov7670_power_off(sd);
return 0;
entity_cleanup:
@@ -1954,12 +1956,9 @@ static int ov7670_probe(struct i2c_client *client,
v4l2_ctrl_handler_free(&info->hdl);
power_off:
ov7670_power_off(sd);
-clk_disable:
- clk_disable_unprepare(info->clk);
return ret;
}
-
static int ov7670_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
@@ -1967,7 +1966,6 @@ static int ov7670_remove(struct i2c_client *client)
v4l2_async_unregister_subdev(sd);
v4l2_ctrl_handler_free(&info->hdl);
- clk_disable_unprepare(info->clk);
media_entity_cleanup(&info->sd.entity);
ov7670_power_off(sd);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 4/5] media: ov7670: split register setting from set_fmt() logic
2019-01-15 8:54 [PATCH v4 0/5] ov7670 fixes Lubomir Rintel
` (2 preceding siblings ...)
2019-01-15 8:54 ` [PATCH v4 3/5] media: ov7670: control clock along with power Lubomir Rintel
@ 2019-01-15 8:54 ` Lubomir Rintel
2019-01-15 8:54 ` [PATCH v4 5/5] media: ov7670: split register setting from set_framerate() logic Lubomir Rintel
2019-01-15 10:40 ` [PATCH v4 0/5] ov7670 fixes Sakari Ailus
5 siblings, 0 replies; 10+ messages in thread
From: Lubomir Rintel @ 2019-01-15 8:54 UTC (permalink / raw)
To: Sakari Ailus; +Cc: linux-media, linux-kernel, Lubomir Rintel
This will allow us to restore the last set format after the device returns
from a power off.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
drivers/media/i2c/ov7670.c | 80 ++++++++++++++++++++++----------------
1 file changed, 46 insertions(+), 34 deletions(-)
diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index 93c055502bb9..d0f40d5f6ca0 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -241,6 +241,7 @@ struct ov7670_info {
};
struct v4l2_mbus_framefmt format;
struct ov7670_format_struct *fmt; /* Current format */
+ struct ov7670_win_size *wsize;
struct clk *clk;
int on;
struct gpio_desc *resetb_gpio;
@@ -1001,48 +1002,20 @@ static int ov7670_try_fmt_internal(struct v4l2_subdev *sd,
return 0;
}
-/*
- * Set a format.
- */
-static int ov7670_set_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *format)
+static int ov7670_apply_fmt(struct v4l2_subdev *sd)
{
- struct ov7670_format_struct *ovfmt;
- struct ov7670_win_size *wsize;
struct ov7670_info *info = to_state(sd);
-#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
- struct v4l2_mbus_framefmt *mbus_fmt;
-#endif
+ struct ov7670_win_size *wsize = info->wsize;
unsigned char com7, com10 = 0;
int ret;
- if (format->pad)
- return -EINVAL;
-
- if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
- ret = ov7670_try_fmt_internal(sd, &format->format, NULL, NULL);
- if (ret)
- return ret;
-#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
- mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
- *mbus_fmt = format->format;
- return 0;
-#else
- return -ENOTTY;
-#endif
- }
-
- ret = ov7670_try_fmt_internal(sd, &format->format, &ovfmt, &wsize);
- if (ret)
- return ret;
/*
* COM7 is a pain in the ass, it doesn't like to be read then
* quickly written afterward. But we have everything we need
* to set it absolutely here, as long as the format-specific
* register sets list it first.
*/
- com7 = ovfmt->regs[0].value;
+ com7 = info->fmt->regs[0].value;
com7 |= wsize->com7_bit;
ret = ov7670_write(sd, REG_COM7, com7);
if (ret)
@@ -1064,7 +1037,7 @@ static int ov7670_set_fmt(struct v4l2_subdev *sd,
/*
* Now write the rest of the array. Also store start/stops
*/
- ret = ov7670_write_array(sd, ovfmt->regs + 1);
+ ret = ov7670_write_array(sd, info->fmt->regs + 1);
if (ret)
return ret;
@@ -1079,8 +1052,6 @@ static int ov7670_set_fmt(struct v4l2_subdev *sd,
return ret;
}
- info->fmt = ovfmt;
-
/*
* If we're running RGB565, we must rewrite clkrc after setting
* the other parameters or the image looks poor. If we're *not*
@@ -1098,6 +1069,46 @@ static int ov7670_set_fmt(struct v4l2_subdev *sd,
return 0;
}
+/*
+ * Set a format.
+ */
+static int ov7670_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct ov7670_info *info = to_state(sd);
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+ struct v4l2_mbus_framefmt *mbus_fmt;
+#endif
+ int ret;
+
+ if (format->pad)
+ return -EINVAL;
+
+ if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+ ret = ov7670_try_fmt_internal(sd, &format->format, NULL, NULL);
+ if (ret)
+ return ret;
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+ mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
+ *mbus_fmt = format->format;
+ return 0;
+#else
+ return -ENOTTY;
+#endif
+ }
+
+ ret = ov7670_try_fmt_internal(sd, &format->format, &info->fmt, &info->wsize);
+ if (ret)
+ return ret;
+
+ ret = ov7670_apply_fmt(sd);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static int ov7670_get_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *format)
@@ -1882,6 +1893,7 @@ static int ov7670_probe(struct i2c_client *client,
info->devtype = &ov7670_devdata[id->driver_data];
info->fmt = &ov7670_formats[0];
+ info->wsize = &info->devtype->win_sizes[0];
ov7670_get_default_format(sd, &info->format);
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 5/5] media: ov7670: split register setting from set_framerate() logic
2019-01-15 8:54 [PATCH v4 0/5] ov7670 fixes Lubomir Rintel
` (3 preceding siblings ...)
2019-01-15 8:54 ` [PATCH v4 4/5] media: ov7670: split register setting from set_fmt() logic Lubomir Rintel
@ 2019-01-15 8:54 ` Lubomir Rintel
2019-01-15 9:07 ` Sakari Ailus
2019-01-15 10:40 ` [PATCH v4 0/5] ov7670 fixes Sakari Ailus
5 siblings, 1 reply; 10+ messages in thread
From: Lubomir Rintel @ 2019-01-15 8:54 UTC (permalink / raw)
To: Sakari Ailus; +Cc: linux-media, linux-kernel, Lubomir Rintel
This will allow us to restore the last set frame rate after the device
returns from a power off.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
drivers/media/i2c/ov7670.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index d0f40d5f6ca0..6f9a53d4dcfc 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -812,13 +812,24 @@ static void ov7675_get_framerate(struct v4l2_subdev *sd,
(4 * clkrc);
}
+static int ov7675_apply_framerate(struct v4l2_subdev *sd)
+{
+ struct ov7670_info *info = to_state(sd);
+ int ret;
+
+ ret = ov7670_write(sd, REG_CLKRC, info->clkrc);
+ if (ret < 0)
+ return ret;
+
+ return ov7670_write(sd, REG_DBLV, info->pll_bypass ? DBLV_BYPASS : DBLV_X4);
+}
+
static int ov7675_set_framerate(struct v4l2_subdev *sd,
struct v4l2_fract *tpf)
{
struct ov7670_info *info = to_state(sd);
u32 clkrc;
int pll_factor;
- int ret;
/*
* The formula is fps = 5/4*pixclk for YUV/RGB and
@@ -827,19 +838,10 @@ static int ov7675_set_framerate(struct v4l2_subdev *sd,
* pixclk = clock_speed / (clkrc + 1) * PLLfactor
*
*/
- if (info->pll_bypass) {
- pll_factor = 1;
- ret = ov7670_write(sd, REG_DBLV, DBLV_BYPASS);
- } else {
- pll_factor = PLL_FACTOR;
- ret = ov7670_write(sd, REG_DBLV, DBLV_X4);
- }
- if (ret < 0)
- return ret;
-
if (tpf->numerator == 0 || tpf->denominator == 0) {
clkrc = 0;
} else {
+ pll_factor = info->pll_bypass ? 1 : PLL_FACTOR;
clkrc = (5 * pll_factor * info->clock_speed * tpf->numerator) /
(4 * tpf->denominator);
if (info->fmt->mbus_code == MEDIA_BUS_FMT_SBGGR8_1X8)
@@ -861,7 +863,7 @@ static int ov7675_set_framerate(struct v4l2_subdev *sd,
/* Recalculate frame rate */
ov7675_get_framerate(sd, tpf);
- return ov7670_write(sd, REG_CLKRC, info->clkrc);
+ return ov7675_apply_framerate(sd);
}
static void ov7670_get_framerate_legacy(struct v4l2_subdev *sd,
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v4 5/5] media: ov7670: split register setting from set_framerate() logic
2019-01-15 8:54 ` [PATCH v4 5/5] media: ov7670: split register setting from set_framerate() logic Lubomir Rintel
@ 2019-01-15 9:07 ` Sakari Ailus
0 siblings, 0 replies; 10+ messages in thread
From: Sakari Ailus @ 2019-01-15 9:07 UTC (permalink / raw)
To: Lubomir Rintel; +Cc: linux-media, linux-kernel
On Tue, Jan 15, 2019 at 09:54:48AM +0100, Lubomir Rintel wrote:
> This will allow us to restore the last set frame rate after the device
> returns from a power off.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Thanks!
I've applied them, and hopefully all is well now.
> ---
> drivers/media/i2c/ov7670.c | 26 ++++++++++++++------------
> 1 file changed, 14 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
> index d0f40d5f6ca0..6f9a53d4dcfc 100644
> --- a/drivers/media/i2c/ov7670.c
> +++ b/drivers/media/i2c/ov7670.c
> @@ -812,13 +812,24 @@ static void ov7675_get_framerate(struct v4l2_subdev *sd,
> (4 * clkrc);
> }
>
> +static int ov7675_apply_framerate(struct v4l2_subdev *sd)
> +{
> + struct ov7670_info *info = to_state(sd);
> + int ret;
> +
> + ret = ov7670_write(sd, REG_CLKRC, info->clkrc);
> + if (ret < 0)
> + return ret;
> +
> + return ov7670_write(sd, REG_DBLV, info->pll_bypass ? DBLV_BYPASS : DBLV_X4);
I wrapped this to avoid it exceeding 80... no other changes.
> +}
--
Sakari Ailus
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v4 0/5] ov7670 fixes
2019-01-15 8:54 [PATCH v4 0/5] ov7670 fixes Lubomir Rintel
` (4 preceding siblings ...)
2019-01-15 8:54 ` [PATCH v4 5/5] media: ov7670: split register setting from set_framerate() logic Lubomir Rintel
@ 2019-01-15 10:40 ` Sakari Ailus
2019-01-15 11:12 ` Lubomir Rintel
5 siblings, 1 reply; 10+ messages in thread
From: Sakari Ailus @ 2019-01-15 10:40 UTC (permalink / raw)
To: Lubomir Rintel; +Cc: linux-media, linux-kernel
On Tue, Jan 15, 2019 at 09:54:43AM +0100, Lubomir Rintel wrote:
> Hi,
>
> here are the ov7670 patches originally from the "media: make Marvell camera
> work on DT-based OLPC XO-1.75" updated to apply cleanly on top of
> <git://linuxtv.org/sailus/media_tree.git> master as requested.
>
> I've also added "ov7670: Remove useless use of a ret variable" with my Ack
> slapped on it.
Hi Lubomir,
It seems the end result compiles but the intermedia patches do not. Could
you resend, please? I'll replace the patches in my tree with a new version
then...
Thanks.
--
Sakari Ailus
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v4 0/5] ov7670 fixes
2019-01-15 10:40 ` [PATCH v4 0/5] ov7670 fixes Sakari Ailus
@ 2019-01-15 11:12 ` Lubomir Rintel
2019-01-15 11:24 ` Sakari Ailus
0 siblings, 1 reply; 10+ messages in thread
From: Lubomir Rintel @ 2019-01-15 11:12 UTC (permalink / raw)
To: Sakari Ailus; +Cc: linux-media, linux-kernel
On Tue, 2019-01-15 at 12:40 +0200, Sakari Ailus wrote:
> On Tue, Jan 15, 2019 at 09:54:43AM +0100, Lubomir Rintel wrote:
> > Hi,
> >
> > here are the ov7670 patches originally from the "media: make Marvell camera
> > work on DT-based OLPC XO-1.75" updated to apply cleanly on top of
> > <git://linuxtv.org/sailus/media_tree.git> master as requested.
> >
> > I've also added "ov7670: Remove useless use of a ret variable" with my Ack
> > slapped on it.
>
> Hi Lubomir,
>
> It seems the end result compiles but the intermedia patches do not. Could
> you resend, please? I'll replace the patches in my tree with a new version
> then...
Seems like the order got messed up. It should be sufficient to reorder
the patches like this:
pick f42ae764598a ov7670: Remove useless use of a ret variable
pick 5be2efe0e5bb media: ov7670: split register setting from set_fmt() logic
pick 38eed963866e media: ov7670: split register setting from set_framerate() logic
pick 97be3c31de46 media: ov7670: hook s_power onto v4l2 core
pick 56c292d92642 media: ov7670: control clock along with power
(With "git rebase -i 87680151c22eee5b3bb6361fb8d18d765a9d8aff")
>
> Thanks.
Cheers,
Lubo
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v4 0/5] ov7670 fixes
2019-01-15 11:12 ` Lubomir Rintel
@ 2019-01-15 11:24 ` Sakari Ailus
0 siblings, 0 replies; 10+ messages in thread
From: Sakari Ailus @ 2019-01-15 11:24 UTC (permalink / raw)
To: Lubomir Rintel; +Cc: linux-media, linux-kernel
On Tue, Jan 15, 2019 at 12:12:56PM +0100, Lubomir Rintel wrote:
> On Tue, 2019-01-15 at 12:40 +0200, Sakari Ailus wrote:
> > On Tue, Jan 15, 2019 at 09:54:43AM +0100, Lubomir Rintel wrote:
> > > Hi,
> > >
> > > here are the ov7670 patches originally from the "media: make Marvell camera
> > > work on DT-based OLPC XO-1.75" updated to apply cleanly on top of
> > > <git://linuxtv.org/sailus/media_tree.git> master as requested.
> > >
> > > I've also added "ov7670: Remove useless use of a ret variable" with my Ack
> > > slapped on it.
> >
> > Hi Lubomir,
> >
> > It seems the end result compiles but the intermedia patches do not. Could
> > you resend, please? I'll replace the patches in my tree with a new version
> > then...
>
> Seems like the order got messed up. It should be sufficient to reorder
> the patches like this:
>
> pick f42ae764598a ov7670: Remove useless use of a ret variable
> pick 5be2efe0e5bb media: ov7670: split register setting from set_fmt() logic
> pick 38eed963866e media: ov7670: split register setting from set_framerate() logic
> pick 97be3c31de46 media: ov7670: hook s_power onto v4l2 core
> pick 56c292d92642 media: ov7670: control clock along with power
>
> (With "git rebase -i 87680151c22eee5b3bb6361fb8d18d765a9d8aff")
Oh well. Done; let's see if that works better...
--
Sakari Ailus
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2019-01-15 11:26 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-15 8:54 [PATCH v4 0/5] ov7670 fixes Lubomir Rintel
2019-01-15 8:54 ` [PATCH v4 1/5] ov7670: Remove useless use of a ret variable Lubomir Rintel
2019-01-15 8:54 ` [PATCH v4 2/5] media: ov7670: hook s_power onto v4l2 core Lubomir Rintel
2019-01-15 8:54 ` [PATCH v4 3/5] media: ov7670: control clock along with power Lubomir Rintel
2019-01-15 8:54 ` [PATCH v4 4/5] media: ov7670: split register setting from set_fmt() logic Lubomir Rintel
2019-01-15 8:54 ` [PATCH v4 5/5] media: ov7670: split register setting from set_framerate() logic Lubomir Rintel
2019-01-15 9:07 ` Sakari Ailus
2019-01-15 10:40 ` [PATCH v4 0/5] ov7670 fixes Sakari Ailus
2019-01-15 11:12 ` Lubomir Rintel
2019-01-15 11:24 ` Sakari Ailus
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).