From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
To: linux-media@vger.kernel.org
Cc: Dafna Hirschfeld <dafna3@gmail.com>,
Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
Ezequiel Garcia <ezequiel@collabora.com>,
Hans Verkuil <hverkuil-cisco@xs4all.nl>
Subject: [PATCHv2 4/6] videodev2.h: add V4L2_CTRL_FLAG_REQUIRES_REQUESTS
Date: Mon, 11 Feb 2019 11:13:55 +0100 [thread overview]
Message-ID: <20190211101357.48754-5-hverkuil-cisco@xs4all.nl> (raw)
In-Reply-To: <20190211101357.48754-1-hverkuil-cisco@xs4all.nl>
Indicate if a control can only be set through a request, as opposed
to being set directly. This is necessary for stateless codecs where
it makes no sense to set the state controls directly.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
---
.../media/uapi/v4l/vidioc-queryctrl.rst | 4 ++++
.../media/videodev2.h.rst.exceptions | 1 +
include/uapi/linux/videodev2.h | 23 ++++++++++---------
3 files changed, 17 insertions(+), 11 deletions(-)
diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
index f824162d0ea9..b08c69cedb92 100644
--- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
+++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
@@ -539,6 +539,10 @@ See also the examples in :ref:`control`.
``V4L2_CTRL_FLAG_GRABBED`` flag when buffers are allocated or
streaming is in progress since most drivers do not support changing
the format in that case.
+ * - ``V4L2_CTRL_FLAG_REQUIRES_REQUESTS``
+ - 0x0800
+ - This control cannot be set directly, but only through a request
+ (i.e. by setting ``which`` to ``V4L2_CTRL_WHICH_REQUEST_VAL``).
Return Value
diff --git a/Documentation/media/videodev2.h.rst.exceptions b/Documentation/media/videodev2.h.rst.exceptions
index 64d348e67df9..0caa72014dba 100644
--- a/Documentation/media/videodev2.h.rst.exceptions
+++ b/Documentation/media/videodev2.h.rst.exceptions
@@ -351,6 +351,7 @@ replace define V4L2_CTRL_FLAG_VOLATILE control-flags
replace define V4L2_CTRL_FLAG_HAS_PAYLOAD control-flags
replace define V4L2_CTRL_FLAG_EXECUTE_ON_WRITE control-flags
replace define V4L2_CTRL_FLAG_MODIFY_LAYOUT control-flags
+replace define V4L2_CTRL_FLAG_REQUIRES_REQUESTS control-flags
replace define V4L2_CTRL_FLAG_NEXT_CTRL control
replace define V4L2_CTRL_FLAG_NEXT_COMPOUND control
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 7f035d44666e..a78bfdc1df97 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -1736,17 +1736,18 @@ struct v4l2_querymenu {
} __attribute__ ((packed));
/* Control flags */
-#define V4L2_CTRL_FLAG_DISABLED 0x0001
-#define V4L2_CTRL_FLAG_GRABBED 0x0002
-#define V4L2_CTRL_FLAG_READ_ONLY 0x0004
-#define V4L2_CTRL_FLAG_UPDATE 0x0008
-#define V4L2_CTRL_FLAG_INACTIVE 0x0010
-#define V4L2_CTRL_FLAG_SLIDER 0x0020
-#define V4L2_CTRL_FLAG_WRITE_ONLY 0x0040
-#define V4L2_CTRL_FLAG_VOLATILE 0x0080
-#define V4L2_CTRL_FLAG_HAS_PAYLOAD 0x0100
-#define V4L2_CTRL_FLAG_EXECUTE_ON_WRITE 0x0200
-#define V4L2_CTRL_FLAG_MODIFY_LAYOUT 0x0400
+#define V4L2_CTRL_FLAG_DISABLED 0x0001
+#define V4L2_CTRL_FLAG_GRABBED 0x0002
+#define V4L2_CTRL_FLAG_READ_ONLY 0x0004
+#define V4L2_CTRL_FLAG_UPDATE 0x0008
+#define V4L2_CTRL_FLAG_INACTIVE 0x0010
+#define V4L2_CTRL_FLAG_SLIDER 0x0020
+#define V4L2_CTRL_FLAG_WRITE_ONLY 0x0040
+#define V4L2_CTRL_FLAG_VOLATILE 0x0080
+#define V4L2_CTRL_FLAG_HAS_PAYLOAD 0x0100
+#define V4L2_CTRL_FLAG_EXECUTE_ON_WRITE 0x0200
+#define V4L2_CTRL_FLAG_MODIFY_LAYOUT 0x0400
+#define V4L2_CTRL_FLAG_REQUIRES_REQUESTS 0x0800
/* Query flags, to be ORed with the control ID */
#define V4L2_CTRL_FLAG_NEXT_CTRL 0x80000000
--
2.20.1
next prev parent reply other threads:[~2019-02-11 10:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-11 10:13 [PATCHv2 0/6] vb2/v4l2-ctrls: check if requests are required Hans Verkuil
2019-02-11 10:13 ` [PATCHv2 1/6] vb2: add requires_requests bit for stateless codecs Hans Verkuil
2019-02-11 10:13 ` [PATCHv2 2/6] videodev2.h: add V4L2_BUF_CAP_REQUIRES_REQUESTS Hans Verkuil
2019-02-11 10:13 ` [PATCHv2 3/6] cedrus: set requires_requests Hans Verkuil
2019-02-11 10:13 ` Hans Verkuil [this message]
2019-02-11 13:04 ` [PATCHv2 4/6] videodev2.h: add V4L2_CTRL_FLAG_REQUIRES_REQUESTS Hans Verkuil
2019-02-13 10:38 ` Paul Kocialkowski
2019-02-13 11:59 ` Hans Verkuil
2019-02-11 10:13 ` [PATCHv2 5/6] v4l2-ctrls: check for REQUIRES_REQUESTS flag Hans Verkuil
2019-02-11 10:13 ` [PATCHv2 6/6] v4l2-ctrls: mark MPEG2 stateless controls as REQUIRES_REQUESTS Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190211101357.48754-5-hverkuil-cisco@xs4all.nl \
--to=hverkuil-cisco@xs4all.nl \
--cc=dafna3@gmail.com \
--cc=ezequiel@collabora.com \
--cc=linux-media@vger.kernel.org \
--cc=paul.kocialkowski@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).