[PATCH v6 0/7] media: make Marvell camera work on DT-based OLPC XO-1.75

[PATCH v6 0/7] media: make Marvell camera work on DT-based OLPC XO-1.75

[Lubomir Rintel]

Hi,

this is a re-send of the patch that lacked a Signed-off-by tag and the
patches that followd it in the previosu spin of the series.

Applies on top of master branch of git://linuxtv.org/media_tree.git

Cheers,
Lubo

[PATCH v6 1/7] Revert "[media] marvell-ccic: reset ccic phy when stop streaming for stability"

[Lubomir Rintel]

This accesses the clock registers directly and thus is going to stay in the
way of making the driver devicetree friendly.

No boards seems to actually use this. If it's somehow actually needed it
needs to be done differently.

This reverts commit 7c269f454e7a51b151d94f99344120efa1cd0acb.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

---
Changes since v5:
- Added a sign-off

 .../media/platform/marvell-ccic/mcam-core.c   |  6 -----
 .../media/platform/marvell-ccic/mcam-core.h   |  2 --
 .../media/platform/marvell-ccic/mmp-driver.c  | 25 -------------------
 3 files changed, 33 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index 040fe9501415..2494a31de01b 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -1154,12 +1154,6 @@ static void mcam_vb_stop_streaming(struct vb2_queue *vq)
 	if (cam->state != S_STREAMING)
 		return;
 	mcam_ctlr_stop_dma(cam);
-	/*
-	 * Reset the CCIC PHY after stopping streaming,
-	 * otherwise, the CCIC may be unstable.
-	 */
-	if (cam->ctlr_reset)
-		cam->ctlr_reset(cam);
 	/*
 	 * VB2 reclaims the buffers, so we need to forget
 	 * about them.
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h
index ad8955f9f0a1..a3a097a45e78 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.h
+++ b/drivers/media/platform/marvell-ccic/mcam-core.h
@@ -116,7 +116,6 @@ struct mcam_camera {
 	int mclk_src;	/* which clock source the mclk derives from */
 	int mclk_div;	/* Clock Divider Value for MCLK */
 
-	int ccic_id;
 	enum v4l2_mbus_type bus_type;
 	/* MIPI support */
 	/* The dphy config value, allocated in board file
@@ -137,7 +136,6 @@ struct mcam_camera {
 	int (*plat_power_up) (struct mcam_camera *cam);
 	void (*plat_power_down) (struct mcam_camera *cam);
 	void (*calc_dphy) (struct mcam_camera *cam);
-	void (*ctlr_reset) (struct mcam_camera *cam);
 
 	/*
 	 * Everything below here is private to the mcam core and
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index af76eb637773..8d982c4aae0d 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -105,7 +105,6 @@ static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev)
 #define CPU_SUBSYS_PMU_BASE	0xd4282800
 #define REG_CCIC_DCGCR		0x28	/* CCIC dyn clock gate ctrl reg */
 #define REG_CCIC_CRCR		0x50	/* CCIC clk reset ctrl reg	*/
-#define REG_CCIC2_CRCR		0xf4	/* CCIC2 clk reset ctrl reg	*/
 
 static void mcam_clk_enable(struct mcam_camera *mcam)
 {
@@ -183,28 +182,6 @@ static void mmpcam_power_down(struct mcam_camera *mcam)
 	mcam_clk_disable(mcam);
 }
 
-static void mcam_ctlr_reset(struct mcam_camera *mcam)
-{
-	unsigned long val;
-	struct mmp_camera *cam = mcam_to_cam(mcam);
-
-	if (mcam->ccic_id) {
-		/*
-		 * Using CCIC2
-		 */
-		val = ioread32(cam->power_regs + REG_CCIC2_CRCR);
-		iowrite32(val & ~0x2, cam->power_regs + REG_CCIC2_CRCR);
-		iowrite32(val | 0x2, cam->power_regs + REG_CCIC2_CRCR);
-	} else {
-		/*
-		 * Using CCIC1
-		 */
-		val = ioread32(cam->power_regs + REG_CCIC_CRCR);
-		iowrite32(val & ~0x2, cam->power_regs + REG_CCIC_CRCR);
-		iowrite32(val | 0x2, cam->power_regs + REG_CCIC_CRCR);
-	}
-}
-
 /*
  * calc the dphy register values
  * There are three dphy registers being used.
@@ -352,11 +329,9 @@ static int mmpcam_probe(struct platform_device *pdev)
 	mcam = &cam->mcam;
 	mcam->plat_power_up = mmpcam_power_up;
 	mcam->plat_power_down = mmpcam_power_down;
-	mcam->ctlr_reset = mcam_ctlr_reset;
 	mcam->calc_dphy = mmpcam_calc_dphy;
 	mcam->dev = &pdev->dev;
 	mcam->use_smbus = 0;
-	mcam->ccic_id = pdev->id;
 	mcam->mclk_min = pdata->mclk_min;
 	mcam->mclk_src = pdata->mclk_src;
 	mcam->mclk_div = pdata->mclk_div;
-- 
2.21.0

[PATCH v6 2/7] [media] marvell-ccic: drop unused stuff

[Lubomir Rintel]

Remove structure members and headers that are not actually used. Saves
us from some noise in subsequent cleanup commits.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
 drivers/media/platform/marvell-ccic/mcam-core.c  | 1 -
 drivers/media/platform/marvell-ccic/mcam-core.h  | 2 --
 drivers/media/platform/marvell-ccic/mmp-driver.c | 2 --
 include/linux/platform_data/media/mmp-camera.h   | 1 -
 4 files changed, 6 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index 2494a31de01b..76641d5211ab 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -1776,7 +1776,6 @@ int mccic_register(struct mcam_camera *cam)
 	 */
 	sensor_cfg.clock_speed = cam->clock_speed;
 	sensor_cfg.use_smbus = cam->use_smbus;
-	cam->sensor_addr = ov7670_info.addr;
 	cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev,
 			cam->i2c_adapter, &ov7670_info, NULL);
 	if (cam->sensor == NULL) {
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h
index a3a097a45e78..b828b1bb59d3 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.h
+++ b/drivers/media/platform/marvell-ccic/mcam-core.h
@@ -112,7 +112,6 @@ struct mcam_camera {
 	short int use_smbus;	/* SMBUS or straight I2c? */
 	enum mcam_buffer_mode buffer_mode;
 
-	int mclk_min;	/* The minimal value of mclk */
 	int mclk_src;	/* which clock source the mclk derives from */
 	int mclk_div;	/* Clock Divider Value for MCLK */
 
@@ -152,7 +151,6 @@ struct mcam_camera {
 	 */
 	struct video_device vdev;
 	struct v4l2_subdev *sensor;
-	unsigned short sensor_addr;
 
 	/* Videobuf2 stuff */
 	struct vb2_queue vb_queue;
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 8d982c4aae0d..a1b1d66e34cd 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/i2c-gpio.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
@@ -332,7 +331,6 @@ static int mmpcam_probe(struct platform_device *pdev)
 	mcam->calc_dphy = mmpcam_calc_dphy;
 	mcam->dev = &pdev->dev;
 	mcam->use_smbus = 0;
-	mcam->mclk_min = pdata->mclk_min;
 	mcam->mclk_src = pdata->mclk_src;
 	mcam->mclk_div = pdata->mclk_div;
 	mcam->bus_type = pdata->bus_type;
diff --git a/include/linux/platform_data/media/mmp-camera.h b/include/linux/platform_data/media/mmp-camera.h
index d2d3a443eedf..4c3a80a45883 100644
--- a/include/linux/platform_data/media/mmp-camera.h
+++ b/include/linux/platform_data/media/mmp-camera.h
@@ -16,7 +16,6 @@ struct mmp_camera_platform_data {
 	int sensor_power_gpio;
 	int sensor_reset_gpio;
 	enum v4l2_mbus_type bus_type;
-	int mclk_min;	/* The minimal value of MCLK */
 	int mclk_src;	/* which clock source the MCLK derives from */
 	int mclk_div;	/* Clock Divider Value for MCLK */
 	/*
-- 
2.21.0

[PATCH v6 3/7] [media] marvell-ccic/mmp: enable clock before accessing registers

[Lubomir Rintel]

The access to REG_CLKCTRL or REG_CTRL1 without the clock enabled hangs
the machine. Enable the clock first.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
 drivers/media/platform/marvell-ccic/mmp-driver.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index a1b1d66e34cd..352e67fc1062 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -144,6 +144,7 @@ static int mmpcam_power_up(struct mcam_camera *mcam)
  * Turn on power and clocks to the controller.
  */
 	mmpcam_power_up_ctlr(cam);
+	mcam_clk_enable(mcam);
 /*
  * Provide power to the sensor.
  */
@@ -157,8 +158,6 @@ static int mmpcam_power_up(struct mcam_camera *mcam)
 	gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */
 	mdelay(5);
 
-	mcam_clk_enable(mcam);
-
 	return 0;
 }
 
-- 
2.21.0

[PATCH v6 4/7] [media] marvell-ccic: rename the clocks

[Lubomir Rintel]

Use the names more suitable for devicetree bindings.

There are no board files utilizing this, thus we seem to be at liberty
at renaming this without consequences.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

---
Changes since v2:
- This patch was added to the series

 drivers/media/platform/marvell-ccic/mmp-driver.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 352e67fc1062..8f1d2a972bc9 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -33,7 +33,7 @@ MODULE_ALIAS("platform:mmp-camera");
 MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
 MODULE_LICENSE("GPL");
 
-static char *mcam_clks[] = {"CCICAXICLK", "CCICFUNCLK", "CCICPHYCLK"};
+static char *mcam_clks[] = {"axi", "func", "phy"};
 
 struct mmp_camera {
 	void __iomem *power_regs;
-- 
2.21.0

[PATCH v6 5/7] [media] marvell-ccic/mmp: add devicetree support

[Lubomir Rintel]

The platform data is actually not used anywhere (along with the CSI
support) and should be safe to remove.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>

---
Changes since v1:
- s/This are/These are/ in a comment

 .../media/platform/marvell-ccic/mmp-driver.c  | 36 ++++++++++++++-----
 1 file changed, 27 insertions(+), 9 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 8f1d2a972bc9..54c2dd8c29d8 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -19,6 +19,8 @@
 #include <media/v4l2-device.h>
 #include <linux/platform_data/media/mmp-camera.h>
 #include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
@@ -196,6 +198,9 @@ static void mmpcam_calc_dphy(struct mcam_camera *mcam)
 	struct device *dev = &cam->pdev->dev;
 	unsigned long tx_clk_esc;
 
+	if (!pdata)
+		return;
+
 	/*
 	 * If CSI2_DPHY3 is calculated dynamically,
 	 * pdata->lane_clk should be already set
@@ -314,10 +319,6 @@ static int mmpcam_probe(struct platform_device *pdev)
 	struct mmp_camera_platform_data *pdata;
 	int ret;
 
-	pdata = pdev->dev.platform_data;
-	if (!pdata)
-		return -ENODEV;
-
 	cam = devm_kzalloc(&pdev->dev, sizeof(*cam), GFP_KERNEL);
 	if (cam == NULL)
 		return -ENOMEM;
@@ -330,17 +331,29 @@ static int mmpcam_probe(struct platform_device *pdev)
 	mcam->calc_dphy = mmpcam_calc_dphy;
 	mcam->dev = &pdev->dev;
 	mcam->use_smbus = 0;
-	mcam->mclk_src = pdata->mclk_src;
-	mcam->mclk_div = pdata->mclk_div;
-	mcam->bus_type = pdata->bus_type;
-	mcam->dphy = pdata->dphy;
+	pdata = pdev->dev.platform_data;
+	if (pdata) {
+		mcam->mclk_src = pdata->mclk_src;
+		mcam->mclk_div = pdata->mclk_div;
+		mcam->bus_type = pdata->bus_type;
+		mcam->dphy = pdata->dphy;
+		mcam->lane = pdata->lane;
+	} else {
+		/*
+		 * These are values that used to be hardcoded in mcam-core and
+		 * work well on a OLPC XO 1.75 with a parallel bus sensor.
+		 * If it turns out other setups make sense, the values should
+		 * be obtained from the device tree.
+		 */
+		mcam->mclk_src = 3;
+		mcam->mclk_div = 2;
+	}
 	if (mcam->bus_type == V4L2_MBUS_CSI2_DPHY) {
 		cam->mipi_clk = devm_clk_get(mcam->dev, "mipi");
 		if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0))
 			return PTR_ERR(cam->mipi_clk);
 	}
 	mcam->mipi_enabled = false;
-	mcam->lane = pdata->lane;
 	mcam->chip_id = MCAM_ARMADA610;
 	mcam->buffer_mode = B_DMA_sg;
 	strscpy(mcam->bus_info, "platform:mmp-camera", sizeof(mcam->bus_info));
@@ -475,6 +488,10 @@ static int mmpcam_resume(struct platform_device *pdev)
 
 #endif
 
+static const struct of_device_id mmpcam_of_match[] = {
+	{ .compatible = "marvell,mmp2-ccic", },
+	{},
+};
 
 static struct platform_driver mmpcam_driver = {
 	.probe		= mmpcam_probe,
@@ -485,6 +502,7 @@ static struct platform_driver mmpcam_driver = {
 #endif
 	.driver = {
 		.name	= "mmp-camera",
+		.of_match_table = of_match_ptr(mmpcam_of_match),
 	}
 };
 
-- 
2.21.0

Re: [PATCH v6 5/7] [media] marvell-ccic/mmp: add devicetree support

[Jacopo Mondi]

[-- Attachment #1: Type: text/plain, Size: 3634 bytes --]

On Tue, May 28, 2019 at 11:07:29AM +0200, Lubomir Rintel wrote:
> The platform data is actually not used anywhere (along with the CSI
> support) and should be safe to remove.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> Acked-by: Pavel Machek <pavel@ucw.cz>
>
> ---
> Changes since v1:
> - s/This are/These are/ in a comment
>
>  .../media/platform/marvell-ccic/mmp-driver.c  | 36 ++++++++++++++-----
>  1 file changed, 27 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
> index 8f1d2a972bc9..54c2dd8c29d8 100644
> --- a/drivers/media/platform/marvell-ccic/mmp-driver.c
> +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
> @@ -19,6 +19,8 @@
>  #include <media/v4l2-device.h>
>  #include <linux/platform_data/media/mmp-camera.h>
>  #include <linux/device.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/gpio.h>
>  #include <linux/io.h>
> @@ -196,6 +198,9 @@ static void mmpcam_calc_dphy(struct mcam_camera *mcam)
>  	struct device *dev = &cam->pdev->dev;
>  	unsigned long tx_clk_esc;
>
> +	if (!pdata)
> +		return;
> +

This seems a bit of an hack to me. The caller knows the mcam->bus_type
and should not try to calc_dphy() if the bus type is not CSI2_DPHY.
What do you think?

>  	/*
>  	 * If CSI2_DPHY3 is calculated dynamically,
>  	 * pdata->lane_clk should be already set
> @@ -314,10 +319,6 @@ static int mmpcam_probe(struct platform_device *pdev)
>  	struct mmp_camera_platform_data *pdata;
>  	int ret;
>
> -	pdata = pdev->dev.platform_data;
> -	if (!pdata)
> -		return -ENODEV;
> -
>  	cam = devm_kzalloc(&pdev->dev, sizeof(*cam), GFP_KERNEL);
>  	if (cam == NULL)
>  		return -ENOMEM;
> @@ -330,17 +331,29 @@ static int mmpcam_probe(struct platform_device *pdev)
>  	mcam->calc_dphy = mmpcam_calc_dphy;
>  	mcam->dev = &pdev->dev;
>  	mcam->use_smbus = 0;
> -	mcam->mclk_src = pdata->mclk_src;
> -	mcam->mclk_div = pdata->mclk_div;
> -	mcam->bus_type = pdata->bus_type;
> -	mcam->dphy = pdata->dphy;
> +	pdata = pdev->dev.platform_data;
> +	if (pdata) {
> +		mcam->mclk_src = pdata->mclk_src;
> +		mcam->mclk_div = pdata->mclk_div;
> +		mcam->bus_type = pdata->bus_type;
> +		mcam->dphy = pdata->dphy;
> +		mcam->lane = pdata->lane;
> +	} else {
> +		/*
> +		 * These are values that used to be hardcoded in mcam-core and
> +		 * work well on a OLPC XO 1.75 with a parallel bus sensor.
> +		 * If it turns out other setups make sense, the values should
> +		 * be obtained from the device tree.
> +		 */
> +		mcam->mclk_src = 3;
> +		mcam->mclk_div = 2;

I see these only used in mcam_enable_mipi(). Am I wrong?

Thanks
   j

> +	}
>  	if (mcam->bus_type == V4L2_MBUS_CSI2_DPHY) {
>  		cam->mipi_clk = devm_clk_get(mcam->dev, "mipi");
>  		if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0))
>  			return PTR_ERR(cam->mipi_clk);
>  	}
>  	mcam->mipi_enabled = false;
> -	mcam->lane = pdata->lane;
>  	mcam->chip_id = MCAM_ARMADA610;
>  	mcam->buffer_mode = B_DMA_sg;
>  	strscpy(mcam->bus_info, "platform:mmp-camera", sizeof(mcam->bus_info));
> @@ -475,6 +488,10 @@ static int mmpcam_resume(struct platform_device *pdev)
>
>  #endif
>
> +static const struct of_device_id mmpcam_of_match[] = {
> +	{ .compatible = "marvell,mmp2-ccic", },
> +	{},
> +};
>
>  static struct platform_driver mmpcam_driver = {
>  	.probe		= mmpcam_probe,
> @@ -485,6 +502,7 @@ static struct platform_driver mmpcam_driver = {
>  #endif
>  	.driver = {
>  		.name	= "mmp-camera",
> +		.of_match_table = of_match_ptr(mmpcam_of_match),
>  	}
>  };
>
> --
> 2.21.0
>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 5/7] [media] marvell-ccic/mmp: add devicetree support

[Sakari Ailus]

Ping?

Lubomir: I'm applying the set now, but please addres Jacopo's comment.
Thanks.

-- 
Sakari Ailus

Re: [PATCH v6 5/7] [media] marvell-ccic/mmp: add devicetree support

[Lubomir Rintel]

On Thu, 2019-06-20 at 14:35 +0300, Sakari Ailus wrote:
> Ping?
> 
> Lubomir: I'm applying the set now, but please addres Jacopo's comment.
> Thanks.

Hi, I'm wondering if you could wait a couple of minutes?

I've tested the patch set on my machine last night and I was about to
submit the updated set just now.

Alternatively, I can just address Jacopo's comment with a patch that
applies on top of the set, but it would make slightly more sense if it
came earlier.

Thanks
Lubo

Re: [PATCH v6 5/7] [media] marvell-ccic/mmp: add devicetree support

[Sakari Ailus]

On Thu, Jun 20, 2019 at 01:37:53PM +0200, Lubomir Rintel wrote:
> On Thu, 2019-06-20 at 14:35 +0300, Sakari Ailus wrote:
> > Ping?
> > 
> > Lubomir: I'm applying the set now, but please addres Jacopo's comment.
> > Thanks.
> 
> Hi, I'm wondering if you could wait a couple of minutes?
> 
> I've tested the patch set on my machine last night and I was about to
> submit the updated set just now.
> 
> Alternatively, I can just address Jacopo's comment with a patch that
> applies on top of the set, but it would make slightly more sense if it
> came earlier.

I applied the patches but I can always replace them with new versions ---
Mauro will cherry-pick them anyway.

-- 
Sakari Ailus

Re: [PATCH v6 5/7] [media] marvell-ccic/mmp: add devicetree support

[Jacopo Mondi]

[-- Attachment #1: Type: text/plain, Size: 819 bytes --]

Hi Lubomir, Sakari,

On Thu, Jun 20, 2019 at 01:37:53PM +0200, Lubomir Rintel wrote:
> On Thu, 2019-06-20 at 14:35 +0300, Sakari Ailus wrote:
> > Ping?
> >
> > Lubomir: I'm applying the set now, but please addres Jacopo's comment.
> > Thanks.
>
> Hi, I'm wondering if you could wait a couple of minutes?
>
> I've tested the patch set on my machine last night and I was about to
> submit the updated set just now.
>
> Alternatively, I can just address Jacopo's comment with a patch that
> applies on top of the set, but it would make slightly more sense if it
> came earlier.

Indeed, sorry for the late review. I also commented on patches which
are already in, so please consider if you would like to address issues
on top.

It's minor stuff though, nothing that seems a blocker to me.

Thanks
   j
>
> Thanks
> Lubo
>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH v6 6/7] [media] marvell-ccic: use async notifier to get the sensor

[Lubomir Rintel]

An instance of a sensor on DT-based MMP2 platform is always going to be
created asynchronously.

Let's move the manual device creation away from the core to the Cafe
driver (used on OLPC XO-1, not present in DT) and set up appropriate
async matches: I2C on Cafe, FWNODE on MMP (OLPC XO-1.75).

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

---
Changes since v2:
- Moved a typo fix hunk that was accidentally in the following patch
  here, to unbreak build.

 .../media/platform/marvell-ccic/cafe-driver.c |  49 ++++--
 .../media/platform/marvell-ccic/mcam-core.c   | 161 ++++++++++++------
 .../media/platform/marvell-ccic/mcam-core.h   |   5 +-
 .../media/platform/marvell-ccic/mmp-driver.c  |  27 +--
 .../linux/platform_data/media/mmp-camera.h    |   1 -
 5 files changed, 164 insertions(+), 79 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/cafe-driver.c b/drivers/media/platform/marvell-ccic/cafe-driver.c
index 8d00d9d8adff..bf80799a9349 100644
--- a/drivers/media/platform/marvell-ccic/cafe-driver.c
+++ b/drivers/media/platform/marvell-ccic/cafe-driver.c
@@ -8,6 +8,7 @@
  *
  * Copyright 2006-11 One Laptop Per Child Association, Inc.
  * Copyright 2006-11 Jonathan Corbet <corbet@lwn.net>
+ * Copyright 2018 Lubomir Rintel <lkundrak@v3.sk>
  *
  * Written by Jonathan Corbet, corbet@lwn.net.
  *
@@ -27,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
+#include <media/i2c/ov7670.h>
 #include <linux/device.h>
 #include <linux/wait.h>
 #include <linux/delay.h>
@@ -52,6 +54,7 @@ struct cafe_camera {
 	int registered;			/* Fully initialized? */
 	struct mcam_camera mcam;
 	struct pci_dev *pdev;
+	struct i2c_adapter *i2c_adapter;
 	wait_queue_head_t smbus_wait;	/* Waiting on i2c events */
 };
 
@@ -351,15 +354,15 @@ static int cafe_smbus_setup(struct cafe_camera *cam)
 		return ret;
 	}
 
-	cam->mcam.i2c_adapter = adap;
+	cam->i2c_adapter = adap;
 	cafe_smbus_enable_irq(cam);
 	return 0;
 }
 
 static void cafe_smbus_shutdown(struct cafe_camera *cam)
 {
-	i2c_del_adapter(cam->mcam.i2c_adapter);
-	kfree(cam->mcam.i2c_adapter);
+	i2c_del_adapter(cam->i2c_adapter);
+	kfree(cam->i2c_adapter);
 }
 
 
@@ -452,6 +455,29 @@ static irqreturn_t cafe_irq(int irq, void *data)
 	return IRQ_RETVAL(handled);
 }
 
+/* -------------------------------------------------------------------------- */
+
+static struct ov7670_config sensor_cfg = {
+	/*
+	 * Exclude QCIF mode, because it only captures a tiny portion
+	 * of the sensor FOV
+	 */
+	.min_width = 320,
+	.min_height = 240,
+
+	/*
+	 * Set the clock speed for the XO 1; I don't believe this
+	 * driver has ever run anywhere else.
+	 */
+	.clock_speed = 45,
+	.use_smbus = 1,
+};
+
+struct i2c_board_info ov7670_info = {
+	.type = "ov7670",
+	.addr = 0x42 >> 1,
+	.platform_data = &sensor_cfg,
+};
 
 /* -------------------------------------------------------------------------- */
 /*
@@ -481,12 +507,6 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 	mcam->plat_power_down = cafe_ctlr_power_down;
 	mcam->dev = &pdev->dev;
 	snprintf(mcam->bus_info, sizeof(mcam->bus_info), "PCI:%s", pci_name(pdev));
-	/*
-	 * Set the clock speed for the XO 1; I don't believe this
-	 * driver has ever run anywhere else.
-	 */
-	mcam->clock_speed = 45;
-	mcam->use_smbus = 1;
 	/*
 	 * Vmalloc mode for buffers is traditional with this driver.
 	 * We *might* be able to run DMA_contig, especially on a system
@@ -527,12 +547,21 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 	if (ret)
 		goto out_pdown;
 
+	mcam->asd.match_type = V4L2_ASYNC_MATCH_I2C;
+	mcam->asd.match.i2c.adapter_id = i2c_adapter_id(cam->i2c_adapter);
+	mcam->asd.match.i2c.address = ov7670_info.addr;
+
 	ret = mccic_register(mcam);
-	if (ret == 0) {
+	if (ret)
+		goto out_smbus_shutdown;
+
+	if (i2c_new_device(cam->i2c_adapter, &ov7670_info)) {
 		cam->registered = 1;
 		return 0;
 	}
 
+	mccic_shutdown(mcam);
+out_smbus_shutdown:
 	cafe_smbus_shutdown(cam);
 out_pdown:
 	cafe_ctlr_power_down(mcam);
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index 76641d5211ab..7dc7d9d91782 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -4,6 +4,7 @@
  * so it needs platform-specific support outside of the core.
  *
  * Copyright 2011 Jonathan Corbet corbet@lwn.net
+ * Copyright 2018 Lubomir Rintel <lkundrak@v3.sk>
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -26,7 +27,6 @@
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-event.h>
-#include <media/i2c/ov7670.h>
 #include <media/videobuf2-vmalloc.h>
 #include <media/videobuf2-dma-contig.h>
 #include <media/videobuf2-dma-sg.h>
@@ -93,6 +93,9 @@ MODULE_PARM_DESC(buffer_mode,
 #define sensor_call(cam, o, f, args...) \
 	v4l2_subdev_call(cam->sensor, o, f, ##args)
 
+#define notifier_to_mcam(notifier) \
+	container_of(notifier, struct mcam_camera, notifier)
+
 static struct mcam_format_struct {
 	__u8 *desc;
 	__u32 pixelformat;
@@ -1715,23 +1718,94 @@ EXPORT_SYMBOL_GPL(mccic_irq);
 /*
  * Registration and such.
  */
-static struct ov7670_config sensor_cfg = {
-	/*
-	 * Exclude QCIF mode, because it only captures a tiny portion
-	 * of the sensor FOV
-	 */
-	.min_width = 320,
-	.min_height = 240,
-};
 
+static int mccic_notify_bound(struct v4l2_async_notifier *notifier,
+	struct v4l2_subdev *subdev, struct v4l2_async_subdev *asd)
+{
+	struct mcam_camera *cam = notifier_to_mcam(notifier);
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	if (cam->sensor) {
+		cam_err(cam, "sensor already bound\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	v4l2_set_subdev_hostdata(subdev, cam);
+	cam->sensor = subdev;
+
+	ret = mcam_cam_init(cam);
+	if (ret) {
+		cam->sensor = NULL;
+		goto out;
+	}
+
+	ret = mcam_setup_vb2(cam);
+	if (ret) {
+		cam->sensor = NULL;
+		goto out;
+	}
+
+	cam->vdev = mcam_v4l_template;
+	cam->vdev.v4l2_dev = &cam->v4l2_dev;
+	cam->vdev.lock = &cam->s_mutex;
+	cam->vdev.queue = &cam->vb_queue;
+	video_set_drvdata(&cam->vdev, cam);
+	ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1);
+	if (ret) {
+		cam->sensor = NULL;
+		goto out;
+	}
+
+	cam_dbg(cam, "sensor %s bound\n", subdev->name);
+out:
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+static void mccic_notify_unbind(struct v4l2_async_notifier *notifier,
+	struct v4l2_subdev *subdev, struct v4l2_async_subdev *asd)
+{
+	struct mcam_camera *cam = notifier_to_mcam(notifier);
+
+	mutex_lock(&cam->s_mutex);
+	if (cam->sensor != subdev) {
+		cam_err(cam, "sensor %s not bound\n", subdev->name);
+		goto out;
+	}
+
+	video_unregister_device(&cam->vdev);
+	cam->sensor = NULL;
+	cam_dbg(cam, "sensor %s unbound\n", subdev->name);
+
+out:
+	mutex_unlock(&cam->s_mutex);
+}
+
+static int mccic_notify_complete(struct v4l2_async_notifier *notifier)
+{
+	struct mcam_camera *cam = notifier_to_mcam(notifier);
+	int ret;
+
+	/*
+	 * Get the v4l2 setup done.
+	 */
+	ret = v4l2_ctrl_handler_init(&cam->ctrl_handler, 10);
+	if (!ret)
+		cam->v4l2_dev.ctrl_handler = &cam->ctrl_handler;
+
+	return ret;
+}
+
+static const struct v4l2_async_notifier_operations mccic_notify_ops = {
+	.bound = mccic_notify_bound,
+	.unbind = mccic_notify_unbind,
+	.complete = mccic_notify_complete,
+};
 
 int mccic_register(struct mcam_camera *cam)
 {
-	struct i2c_board_info ov7670_info = {
-		.type = "ov7670",
-		.addr = 0x42 >> 1,
-		.platform_data = &sensor_cfg,
-	};
 	int ret;
 
 	/*
@@ -1744,17 +1818,20 @@ int mccic_register(struct mcam_camera *cam)
 		printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, attempting vmalloc mode instead\n");
 		cam->buffer_mode = B_vmalloc;
 	}
+
 	if (!mcam_buffer_mode_supported(cam->buffer_mode)) {
 		printk(KERN_ERR "marvell-cam: buffer mode %d unsupported\n",
 				cam->buffer_mode);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out;
 	}
+
 	/*
 	 * Register with V4L
 	 */
 	ret = v4l2_device_register(cam->dev, &cam->v4l2_dev);
 	if (ret)
-		return ret;
+		goto out;
 
 	mutex_init(&cam->s_mutex);
 	cam->state = S_NOTREADY;
@@ -1764,43 +1841,20 @@ int mccic_register(struct mcam_camera *cam)
 	mcam_ctlr_init(cam);
 
 	/*
-	 * Get the v4l2 setup done.
+	 * Register sensor notifier.
 	 */
-	ret = v4l2_ctrl_handler_init(&cam->ctrl_handler, 10);
-	if (ret)
-		goto out_unregister;
-	cam->v4l2_dev.ctrl_handler = &cam->ctrl_handler;
-
-	/*
-	 * Try to find the sensor.
-	 */
-	sensor_cfg.clock_speed = cam->clock_speed;
-	sensor_cfg.use_smbus = cam->use_smbus;
-	cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev,
-			cam->i2c_adapter, &ov7670_info, NULL);
-	if (cam->sensor == NULL) {
-		ret = -ENODEV;
-		goto out_unregister;
+	v4l2_async_notifier_init(&cam->notifier);
+	ret = v4l2_async_notifier_add_subdev(&cam->notifier, &cam->asd);
+	if (ret) {
+		cam_warn(cam, "failed to add subdev to a notifier");
+		goto out;
 	}
 
-	ret = mcam_cam_init(cam);
-	if (ret)
-		goto out_unregister;
-
-	ret = mcam_setup_vb2(cam);
-	if (ret)
-		goto out_unregister;
-
-	mutex_lock(&cam->s_mutex);
-	cam->vdev = mcam_v4l_template;
-	cam->vdev.v4l2_dev = &cam->v4l2_dev;
-	cam->vdev.lock = &cam->s_mutex;
-	cam->vdev.queue = &cam->vb_queue;
-	video_set_drvdata(&cam->vdev, cam);
-	ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1);
-	if (ret) {
-		mutex_unlock(&cam->s_mutex);
-		goto out_unregister;
+	cam->notifier.ops = &mccic_notify_ops;
+	ret = v4l2_async_notifier_register(&cam->v4l2_dev, &cam->notifier);
+	if (ret < 0) {
+		cam_warn(cam, "failed to register a sensor notifier");
+		goto out;
 	}
 
 	/*
@@ -1811,11 +1865,10 @@ int mccic_register(struct mcam_camera *cam)
 			cam_warn(cam, "Unable to alloc DMA buffers at load will try again later.");
 	}
 
-	mutex_unlock(&cam->s_mutex);
 	return 0;
 
-out_unregister:
-	v4l2_ctrl_handler_free(&cam->ctrl_handler);
+out:
+	v4l2_async_notifier_unregister(&cam->notifier);
 	v4l2_device_unregister(&cam->v4l2_dev);
 	return ret;
 }
@@ -1835,8 +1888,8 @@ void mccic_shutdown(struct mcam_camera *cam)
 	}
 	if (cam->buffer_mode == B_vmalloc)
 		mcam_free_dma_bufs(cam);
-	video_unregister_device(&cam->vdev);
 	v4l2_ctrl_handler_free(&cam->ctrl_handler);
+	v4l2_async_notifier_unregister(&cam->notifier);
 	v4l2_device_unregister(&cam->v4l2_dev);
 }
 EXPORT_SYMBOL_GPL(mccic_shutdown);
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h
index b828b1bb59d3..4a72213aca1a 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.h
+++ b/drivers/media/platform/marvell-ccic/mcam-core.h
@@ -102,14 +102,11 @@ struct mcam_camera {
 	 * These fields should be set by the platform code prior to
 	 * calling mcam_register().
 	 */
-	struct i2c_adapter *i2c_adapter;
 	unsigned char __iomem *regs;
 	unsigned regs_size; /* size in bytes of the register space */
 	spinlock_t dev_lock;
 	struct device *dev; /* For messages, dma alloc */
 	enum mcam_chip_id chip_id;
-	short int clock_speed;	/* Sensor clock speed, default 30 */
-	short int use_smbus;	/* SMBUS or straight I2c? */
 	enum mcam_buffer_mode buffer_mode;
 
 	int mclk_src;	/* which clock source the mclk derives from */
@@ -150,6 +147,8 @@ struct mcam_camera {
 	 * Subsystem structures.
 	 */
 	struct video_device vdev;
+	struct v4l2_async_notifier notifier;
+	struct v4l2_async_subdev asd;
 	struct v4l2_subdev *sensor;
 
 	/* Videobuf2 stuff */
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 54c2dd8c29d8..eea0399fd81f 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -3,6 +3,7 @@
  * to work with the Armada 610 as used in the OLPC 1.75 system.
  *
  * Copyright 2011 Jonathan Corbet <corbet@lwn.net>
+ * Copyright 2018 Lubomir Rintel <lkundrak@v3.sk>
  *
  * This file may be distributed under the terms of the GNU General
  * Public License, version 2.
@@ -11,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
@@ -316,6 +316,7 @@ static int mmpcam_probe(struct platform_device *pdev)
 	struct mmp_camera *cam;
 	struct mcam_camera *mcam;
 	struct resource *res;
+	struct fwnode_handle *ep;
 	struct mmp_camera_platform_data *pdata;
 	int ret;
 
@@ -330,7 +331,6 @@ static int mmpcam_probe(struct platform_device *pdev)
 	mcam->plat_power_down = mmpcam_power_down;
 	mcam->calc_dphy = mmpcam_calc_dphy;
 	mcam->dev = &pdev->dev;
-	mcam->use_smbus = 0;
 	pdata = pdev->dev.platform_data;
 	if (pdata) {
 		mcam->mclk_src = pdata->mclk_src;
@@ -374,15 +374,6 @@ static int mmpcam_probe(struct platform_device *pdev)
 	cam->power_regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(cam->power_regs))
 		return PTR_ERR(cam->power_regs);
-	/*
-	 * Find the i2c adapter.  This assumes, of course, that the
-	 * i2c bus is already up and functioning.
-	 */
-	mcam->i2c_adapter = platform_get_drvdata(pdata->i2c_device);
-	if (mcam->i2c_adapter == NULL) {
-		dev_err(&pdev->dev, "No i2c adapter\n");
-		return -ENODEV;
-	}
 	/*
 	 * Sensor GPIO pins.
 	 */
@@ -405,6 +396,19 @@ static int mmpcam_probe(struct platform_device *pdev)
 
 	mcam_init_clk(mcam);
 
+	/*
+	 * Create a match of the sensor against its OF node.
+	 */
+	ep = fwnode_graph_get_next_endpoint(of_fwnode_handle(pdev->dev.of_node),
+					    NULL);
+	if (!ep)
+		return -ENODEV;
+
+	mcam->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
+	mcam->asd.match.fwnode = fwnode_graph_get_remote_port_parent(ep);
+
+	fwnode_handle_put(ep);
+
 	/*
 	 * Power the device up and hand it off to the core.
 	 */
@@ -414,6 +418,7 @@ static int mmpcam_probe(struct platform_device *pdev)
 	ret = mccic_register(mcam);
 	if (ret)
 		goto out_power_down;
+
 	/*
 	 * Finally, set up our IRQ now that the core is ready to
 	 * deal with it.
diff --git a/include/linux/platform_data/media/mmp-camera.h b/include/linux/platform_data/media/mmp-camera.h
index 4c3a80a45883..c573ebc40035 100644
--- a/include/linux/platform_data/media/mmp-camera.h
+++ b/include/linux/platform_data/media/mmp-camera.h
@@ -12,7 +12,6 @@ enum dphy3_algo {
 };
 
 struct mmp_camera_platform_data {
-	struct platform_device *i2c_device;
 	int sensor_power_gpio;
 	int sensor_reset_gpio;
 	enum v4l2_mbus_type bus_type;
-- 
2.21.0

[PATCH v6 7/7] [media] marvell-ccic: provide a clock for the sensor

[Lubomir Rintel]

The sensor needs the MCLK clock running when it's being probed. On
platforms where the sensor is instantiated from a DT (MMP2) it is going
to happen asynchronously.

Therefore, the current modus operandi, where the bridge driver fiddles
with the sensor power and clock itself is not going to fly. As the comments
wisely note, this doesn't even belong there.

Luckily, the ov7670 driver is already able to control its power and
reset lines, we can just drop the MMP platform glue altogether.

It also requests the clock via the standard clock subsystem. Good -- let's
set up a clock instance so that the sensor can ask us to enable the clock.
Note that this is pretty dumb at the moment: the clock is hardwired to a
particular frequency and parent. It was always the case.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

---
Changes since v3:
- Do not enable the clock on register() now that the sensor can turn
  it on.

Changes since v1:
- [kbuild/ia64] depend on COMMON_CLK.
- [smatch] fix bad return in mcam_v4l_open() leading to lock not getting
  released on error.

 drivers/media/platform/marvell-ccic/Kconfig   |   2 +
 .../media/platform/marvell-ccic/cafe-driver.c |   9 +-
 .../media/platform/marvell-ccic/mcam-core.c   | 172 +++++++++++++-----
 .../media/platform/marvell-ccic/mcam-core.h   |   3 +
 .../media/platform/marvell-ccic/mmp-driver.c  | 152 ++--------------
 .../linux/platform_data/media/mmp-camera.h    |   2 -
 6 files changed, 157 insertions(+), 183 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/Kconfig b/drivers/media/platform/marvell-ccic/Kconfig
index cd88e2eed749..136ce370f62d 100644
--- a/drivers/media/platform/marvell-ccic/Kconfig
+++ b/drivers/media/platform/marvell-ccic/Kconfig
@@ -1,6 +1,7 @@
 config VIDEO_CAFE_CCIC
 	tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
 	depends on PCI && I2C && VIDEO_V4L2
+	depends on COMMON_CLK
 	select VIDEO_OV7670
 	select VIDEOBUF2_VMALLOC
 	select VIDEOBUF2_DMA_CONTIG
@@ -14,6 +15,7 @@ config VIDEO_MMP_CAMERA
 	tristate "Marvell Armada 610 integrated camera controller support"
 	depends on I2C && VIDEO_V4L2
 	depends on ARCH_MMP || COMPILE_TEST
+	depends on COMMON_CLK
 	select VIDEO_OV7670
 	select I2C_GPIO
 	select VIDEOBUF2_VMALLOC
diff --git a/drivers/media/platform/marvell-ccic/cafe-driver.c b/drivers/media/platform/marvell-ccic/cafe-driver.c
index bf80799a9349..173013d6135d 100644
--- a/drivers/media/platform/marvell-ccic/cafe-driver.c
+++ b/drivers/media/platform/marvell-ccic/cafe-driver.c
@@ -33,6 +33,7 @@
 #include <linux/wait.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/clkdev.h>
 
 #include "mcam-core.h"
 
@@ -533,11 +534,10 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 		goto out_iounmap;
 
 	/*
-	 * Initialize the controller and leave it powered up.  It will
-	 * stay that way until the sensor driver shows up.
+	 * Initialize the controller.
 	 */
 	cafe_ctlr_init(mcam);
-	cafe_ctlr_power_up(mcam);
+
 	/*
 	 * Set up I2C/SMBUS communications.  We have to drop the mutex here
 	 * because the sensor could attach in this call chain, leading to
@@ -555,6 +555,9 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 	if (ret)
 		goto out_smbus_shutdown;
 
+	clkdev_create(mcam->mclk, "xclk", "%d-%04x",
+		i2c_adapter_id(cam->i2c_adapter), ov7670_info.addr);
+
 	if (i2c_new_device(cam->i2c_adapter, &ov7670_info)) {
 		cam->registered = 1;
 		return 0;
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index 7dc7d9d91782..f9ac1547d093 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -22,6 +22,7 @@
 #include <linux/vmalloc.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -303,9 +304,6 @@ static void mcam_enable_mipi(struct mcam_camera *mcam)
 		 */
 		mcam_reg_write(mcam, REG_CSI2_CTRL0,
 			CSI2_C0_MIPI_EN | CSI2_C0_ACT_LANE(mcam->lane));
-		mcam_reg_write(mcam, REG_CLKCTRL,
-			(mcam->mclk_src << 29) | mcam->mclk_div);
-
 		mcam->mipi_enabled = true;
 	}
 }
@@ -830,31 +828,6 @@ static void mcam_ctlr_irq_disable(struct mcam_camera *cam)
 	mcam_reg_clear_bit(cam, REG_IRQMASK, FRAMEIRQS);
 }
 
-
-
-static void mcam_ctlr_init(struct mcam_camera *cam)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	/*
-	 * Make sure it's not powered down.
-	 */
-	mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN);
-	/*
-	 * Turn off the enable bit.  It sure should be off anyway,
-	 * but it's good to be sure.
-	 */
-	mcam_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE);
-	/*
-	 * Clock the sensor appropriately.  Controller clock should
-	 * be 48MHz, sensor "typical" value is half that.
-	 */
-	mcam_reg_write_mask(cam, REG_CLKCTRL, 2, CLK_DIV_MASK);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-}
-
-
 /*
  * Stop the controller, and don't return until we're really sure that no
  * further DMA is going on.
@@ -898,14 +871,15 @@ static int mcam_ctlr_power_up(struct mcam_camera *cam)
 	int ret;
 
 	spin_lock_irqsave(&cam->dev_lock, flags);
-	ret = cam->plat_power_up(cam);
-	if (ret) {
-		spin_unlock_irqrestore(&cam->dev_lock, flags);
-		return ret;
+	if (cam->plat_power_up) {
+		ret = cam->plat_power_up(cam);
+		if (ret) {
+			spin_unlock_irqrestore(&cam->dev_lock, flags);
+			return ret;
+		}
 	}
 	mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN);
 	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	msleep(5); /* Just to be sure */
 	return 0;
 }
 
@@ -920,10 +894,101 @@ static void mcam_ctlr_power_down(struct mcam_camera *cam)
 	 * power down routine.
 	 */
 	mcam_reg_set_bit(cam, REG_CTRL1, C1_PWRDWN);
-	cam->plat_power_down(cam);
+	if (cam->plat_power_down)
+		cam->plat_power_down(cam);
 	spin_unlock_irqrestore(&cam->dev_lock, flags);
 }
 
+/* ---------------------------------------------------------------------- */
+/*
+ * Controller clocks.
+ */
+static void mcam_clk_enable(struct mcam_camera *mcam)
+{
+	unsigned int i;
+
+	for (i = 0; i < NR_MCAM_CLK; i++) {
+		if (!IS_ERR(mcam->clk[i]))
+			clk_prepare_enable(mcam->clk[i]);
+	}
+}
+
+static void mcam_clk_disable(struct mcam_camera *mcam)
+{
+	int i;
+
+	for (i = NR_MCAM_CLK - 1; i >= 0; i--) {
+		if (!IS_ERR(mcam->clk[i]))
+			clk_disable_unprepare(mcam->clk[i]);
+	}
+}
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Master sensor clock.
+ */
+static int mclk_prepare(struct clk_hw *hw)
+{
+	struct mcam_camera *cam = container_of(hw, struct mcam_camera, mclk_hw);
+
+	clk_prepare(cam->clk[0]);
+	return 0;
+}
+
+static void mclk_unprepare(struct clk_hw *hw)
+{
+	struct mcam_camera *cam = container_of(hw, struct mcam_camera, mclk_hw);
+
+	clk_unprepare(cam->clk[0]);
+}
+
+static int mclk_enable(struct clk_hw *hw)
+{
+	struct mcam_camera *cam = container_of(hw, struct mcam_camera, mclk_hw);
+	int mclk_src;
+	int mclk_div;
+
+	/*
+	 * Clock the sensor appropriately.  Controller clock should
+	 * be 48MHz, sensor "typical" value is half that.
+	 */
+	if (cam->bus_type == V4L2_MBUS_CSI2_DPHY) {
+		mclk_src = cam->mclk_src;
+		mclk_div = cam->mclk_div;
+	} else {
+		mclk_src = 3;
+		mclk_div = 2;
+	}
+
+	clk_enable(cam->clk[0]);
+	mcam_reg_write(cam, REG_CLKCTRL, (mclk_src << 29) | mclk_div);
+	mcam_ctlr_power_up(cam);
+
+	return 0;
+}
+
+static void mclk_disable(struct clk_hw *hw)
+{
+	struct mcam_camera *cam = container_of(hw, struct mcam_camera, mclk_hw);
+
+	mcam_ctlr_power_down(cam);
+	clk_disable(cam->clk[0]);
+}
+
+static unsigned long mclk_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	return 48000000;
+}
+
+static const struct clk_ops mclk_ops = {
+	.prepare = mclk_prepare,
+	.unprepare = mclk_unprepare,
+	.enable = mclk_enable,
+	.disable = mclk_disable,
+	.recalc_rate = mclk_recalc_rate,
+};
+
 /* -------------------------------------------------------------------- */
 /*
  * Communications with the sensor.
@@ -948,7 +1013,6 @@ static int mcam_cam_init(struct mcam_camera *cam)
 	ret = __mcam_cam_reset(cam);
 	/* Get/set parameters? */
 	cam->state = S_IDLE;
-	mcam_ctlr_power_down(cam);
 	return ret;
 }
 
@@ -1584,9 +1648,10 @@ static int mcam_v4l_open(struct file *filp)
 	if (ret)
 		goto out;
 	if (v4l2_fh_is_singular_file(filp)) {
-		ret = mcam_ctlr_power_up(cam);
+		ret = sensor_call(cam, core, s_power, 1);
 		if (ret)
 			goto out;
+		mcam_clk_enable(cam);
 		__mcam_cam_reset(cam);
 		mcam_set_config_needed(cam, 1);
 	}
@@ -1608,7 +1673,8 @@ static int mcam_v4l_release(struct file *filp)
 	_vb2_fop_release(filp, NULL);
 	if (last_open) {
 		mcam_disable_mipi(cam);
-		mcam_ctlr_power_down(cam);
+		sensor_call(cam, core, s_power, 0);
+		mcam_clk_disable(cam);
 		if (cam->buffer_mode == B_vmalloc && alloc_bufs_at_read)
 			mcam_free_dma_bufs(cam);
 	}
@@ -1806,6 +1872,7 @@ static const struct v4l2_async_notifier_operations mccic_notify_ops = {
 
 int mccic_register(struct mcam_camera *cam)
 {
+	struct clk_init_data mclk_init = { };
 	int ret;
 
 	/*
@@ -1838,7 +1905,6 @@ int mccic_register(struct mcam_camera *cam)
 	mcam_set_config_needed(cam, 1);
 	cam->pix_format = mcam_def_pix_format;
 	cam->mbus_code = mcam_def_mbus_code;
-	mcam_ctlr_init(cam);
 
 	/*
 	 * Register sensor notifier.
@@ -1857,6 +1923,26 @@ int mccic_register(struct mcam_camera *cam)
 		goto out;
 	}
 
+	/*
+	 * Register sensor master clock.
+	 */
+	mclk_init.parent_names = NULL;
+	mclk_init.num_parents = 0;
+	mclk_init.ops = &mclk_ops;
+	mclk_init.name = "mclk";
+
+	of_property_read_string(cam->dev->of_node, "clock-output-names",
+							&mclk_init.name);
+
+	cam->mclk_hw.init = &mclk_init;
+
+	cam->mclk = devm_clk_register(cam->dev, &cam->mclk_hw);
+	if (IS_ERR(cam->mclk)) {
+		ret = PTR_ERR(cam->mclk);
+		dev_err(cam->dev, "can't register clock\n");
+		goto out;
+	}
+
 	/*
 	 * If so requested, try to get our DMA buffers now.
 	 */
@@ -1884,7 +1970,7 @@ void mccic_shutdown(struct mcam_camera *cam)
 	 */
 	if (!list_empty(&cam->vdev.fh_list)) {
 		cam_warn(cam, "Removing a device with users!\n");
-		mcam_ctlr_power_down(cam);
+		sensor_call(cam, core, s_power, 0);
 	}
 	if (cam->buffer_mode == B_vmalloc)
 		mcam_free_dma_bufs(cam);
@@ -1906,7 +1992,8 @@ void mccic_suspend(struct mcam_camera *cam)
 		enum mcam_state cstate = cam->state;
 
 		mcam_ctlr_stop_dma(cam);
-		mcam_ctlr_power_down(cam);
+		sensor_call(cam, core, s_power, 0);
+		mcam_clk_disable(cam);
 		cam->state = cstate;
 	}
 	mutex_unlock(&cam->s_mutex);
@@ -1919,14 +2006,15 @@ int mccic_resume(struct mcam_camera *cam)
 
 	mutex_lock(&cam->s_mutex);
 	if (!list_empty(&cam->vdev.fh_list)) {
-		ret = mcam_ctlr_power_up(cam);
+		mcam_clk_enable(cam);
+		ret = sensor_call(cam, core, s_power, 1);
 		if (ret) {
 			mutex_unlock(&cam->s_mutex);
 			return ret;
 		}
 		__mcam_cam_reset(cam);
 	} else {
-		mcam_ctlr_power_down(cam);
+		sensor_call(cam, core, s_power, 0);
 	}
 	mutex_unlock(&cam->s_mutex);
 
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h
index 4a72213aca1a..2e3a7567a76a 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.h
+++ b/drivers/media/platform/marvell-ccic/mcam-core.h
@@ -8,6 +8,7 @@
 #define _MCAM_CORE_H
 
 #include <linux/list.h>
+#include <linux/clk-provider.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-dev.h>
@@ -125,6 +126,8 @@ struct mcam_camera {
 
 	/* clock tree support */
 	struct clk *clk[NR_MCAM_CLK];
+	struct clk_hw mclk_hw;
+	struct clk *mclk;
 
 	/*
 	 * Callbacks from the core to the platform code.
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index eea0399fd81f..380702cfccd6 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -22,9 +22,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 #include <linux/io.h>
-#include <linux/delay.h>
 #include <linux/list.h>
 #include <linux/pm.h>
 #include <linux/clk.h>
@@ -38,7 +36,6 @@ MODULE_LICENSE("GPL");
 static char *mcam_clks[] = {"axi", "func", "phy"};
 
 struct mmp_camera {
-	void __iomem *power_regs;
 	struct platform_device *pdev;
 	struct mcam_camera mcam;
 	struct list_head devlist;
@@ -94,94 +91,6 @@ static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev)
 	return NULL;
 }
 
-
-
-
-/*
- * Power-related registers; this almost certainly belongs
- * somewhere else.
- *
- * ARMADA 610 register manual, sec 7.2.1, p1842.
- */
-#define CPU_SUBSYS_PMU_BASE	0xd4282800
-#define REG_CCIC_DCGCR		0x28	/* CCIC dyn clock gate ctrl reg */
-#define REG_CCIC_CRCR		0x50	/* CCIC clk reset ctrl reg	*/
-
-static void mcam_clk_enable(struct mcam_camera *mcam)
-{
-	unsigned int i;
-
-	for (i = 0; i < NR_MCAM_CLK; i++) {
-		if (!IS_ERR(mcam->clk[i]))
-			clk_prepare_enable(mcam->clk[i]);
-	}
-}
-
-static void mcam_clk_disable(struct mcam_camera *mcam)
-{
-	int i;
-
-	for (i = NR_MCAM_CLK - 1; i >= 0; i--) {
-		if (!IS_ERR(mcam->clk[i]))
-			clk_disable_unprepare(mcam->clk[i]);
-	}
-}
-
-/*
- * Power control.
- */
-static void mmpcam_power_up_ctlr(struct mmp_camera *cam)
-{
-	iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR);
-	iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR);
-	mdelay(1);
-}
-
-static int mmpcam_power_up(struct mcam_camera *mcam)
-{
-	struct mmp_camera *cam = mcam_to_cam(mcam);
-	struct mmp_camera_platform_data *pdata;
-
-/*
- * Turn on power and clocks to the controller.
- */
-	mmpcam_power_up_ctlr(cam);
-	mcam_clk_enable(mcam);
-/*
- * Provide power to the sensor.
- */
-	mcam_reg_write(mcam, REG_CLKCTRL, 0x60000002);
-	pdata = cam->pdev->dev.platform_data;
-	gpio_set_value(pdata->sensor_power_gpio, 1);
-	mdelay(5);
-	mcam_reg_clear_bit(mcam, REG_CTRL1, 0x10000000);
-	gpio_set_value(pdata->sensor_reset_gpio, 0); /* reset is active low */
-	mdelay(5);
-	gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */
-	mdelay(5);
-
-	return 0;
-}
-
-static void mmpcam_power_down(struct mcam_camera *mcam)
-{
-	struct mmp_camera *cam = mcam_to_cam(mcam);
-	struct mmp_camera_platform_data *pdata;
-/*
- * Turn off clocks and set reset lines
- */
-	iowrite32(0, cam->power_regs + REG_CCIC_DCGCR);
-	iowrite32(0, cam->power_regs + REG_CCIC_CRCR);
-/*
- * Shut down the sensor.
- */
-	pdata = cam->pdev->dev.platform_data;
-	gpio_set_value(pdata->sensor_power_gpio, 0);
-	gpio_set_value(pdata->sensor_reset_gpio, 0);
-
-	mcam_clk_disable(mcam);
-}
-
 /*
  * calc the dphy register values
  * There are three dphy registers being used.
@@ -327,8 +236,6 @@ static int mmpcam_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&cam->devlist);
 
 	mcam = &cam->mcam;
-	mcam->plat_power_up = mmpcam_power_up;
-	mcam->plat_power_down = mmpcam_power_down;
 	mcam->calc_dphy = mmpcam_calc_dphy;
 	mcam->dev = &pdev->dev;
 	pdata = pdev->dev.platform_data;
@@ -366,33 +273,6 @@ static int mmpcam_probe(struct platform_device *pdev)
 	if (IS_ERR(mcam->regs))
 		return PTR_ERR(mcam->regs);
 	mcam->regs_size = resource_size(res);
-	/*
-	 * Power/clock memory is elsewhere; get it too.  Perhaps this
-	 * should really be managed outside of this driver?
-	 */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	cam->power_regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(cam->power_regs))
-		return PTR_ERR(cam->power_regs);
-	/*
-	 * Sensor GPIO pins.
-	 */
-	ret = devm_gpio_request(&pdev->dev, pdata->sensor_power_gpio,
-							"cam-power");
-	if (ret) {
-		dev_err(&pdev->dev, "Can't get sensor power gpio %d",
-				pdata->sensor_power_gpio);
-		return ret;
-	}
-	gpio_direction_output(pdata->sensor_power_gpio, 0);
-	ret = devm_gpio_request(&pdev->dev, pdata->sensor_reset_gpio,
-							"cam-reset");
-	if (ret) {
-		dev_err(&pdev->dev, "Can't get sensor reset gpio %d",
-				pdata->sensor_reset_gpio);
-		return ret;
-	}
-	gpio_direction_output(pdata->sensor_reset_gpio, 0);
 
 	mcam_init_clk(mcam);
 
@@ -410,14 +290,21 @@ static int mmpcam_probe(struct platform_device *pdev)
 	fwnode_handle_put(ep);
 
 	/*
-	 * Power the device up and hand it off to the core.
+	 * Register the device with the core.
 	 */
-	ret = mmpcam_power_up(mcam);
-	if (ret)
-		return ret;
 	ret = mccic_register(mcam);
 	if (ret)
-		goto out_power_down;
+		return ret;
+
+	/*
+	 * Add OF clock provider.
+	 */
+	ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get,
+								mcam->mclk);
+	if (ret) {
+		dev_err(&pdev->dev, "can't add DT clock provider\n");
+		goto out;
+	}
 
 	/*
 	 * Finally, set up our IRQ now that the core is ready to
@@ -426,7 +313,7 @@ static int mmpcam_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (res == NULL) {
 		ret = -ENODEV;
-		goto out_unregister;
+		goto out;
 	}
 	cam->irq = res->start;
 	ret = devm_request_irq(&pdev->dev, cam->irq, mmpcam_irq, IRQF_SHARED,
@@ -436,10 +323,10 @@ static int mmpcam_probe(struct platform_device *pdev)
 		return 0;
 	}
 
-out_unregister:
+out:
+	fwnode_handle_put(mcam->asd.match.fwnode);
 	mccic_shutdown(mcam);
-out_power_down:
-	mmpcam_power_down(mcam);
+
 	return ret;
 }
 
@@ -450,7 +337,6 @@ static int mmpcam_remove(struct mmp_camera *cam)
 
 	mmpcam_remove_device(cam);
 	mccic_shutdown(mcam);
-	mmpcam_power_down(mcam);
 	return 0;
 }
 
@@ -482,12 +368,6 @@ static int mmpcam_resume(struct platform_device *pdev)
 {
 	struct mmp_camera *cam = mmpcam_find_device(pdev);
 
-	/*
-	 * Power up unconditionally just in case the core tries to
-	 * touch a register even if nothing was active before; trust
-	 * me, it's better this way.
-	 */
-	mmpcam_power_up_ctlr(cam);
 	return mccic_resume(&cam->mcam);
 }
 
diff --git a/include/linux/platform_data/media/mmp-camera.h b/include/linux/platform_data/media/mmp-camera.h
index c573ebc40035..53adaab64f28 100644
--- a/include/linux/platform_data/media/mmp-camera.h
+++ b/include/linux/platform_data/media/mmp-camera.h
@@ -12,8 +12,6 @@ enum dphy3_algo {
 };
 
 struct mmp_camera_platform_data {
-	int sensor_power_gpio;
-	int sensor_reset_gpio;
 	enum v4l2_mbus_type bus_type;
 	int mclk_src;	/* which clock source the MCLK derives from */
 	int mclk_div;	/* Clock Divider Value for MCLK */
-- 
2.21.0