From: Dongchun Zhu <dongchun.zhu@mediatek.com>
To: <mchehab@kernel.org>, <andriy.shevchenko@linux.intel.com>,
<robh+dt@kernel.org>, <mark.rutland@arm.com>,
<sakari.ailus@linux.intel.com>, <drinkcat@chromium.org>,
<tfiga@chromium.org>, <matthias.bgg@gmail.com>,
<bingbu.cao@intel.com>
Cc: <srv_heupstream@mediatek.com>,
<linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>, <sj.huang@mediatek.com>,
<linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
<louis.kuo@mediatek.com>, <shengnan.wang@mediatek.com>,
<dongchun.zhu@mediatek.com>
Subject: [V3, 0/2] media: ov8856: Add YAML binding and sensor mode support
Date: Thu, 31 Oct 2019 17:02:11 +0800 [thread overview]
Message-ID: <20191031090213.27727-1-dongchun.zhu@mediatek.com> (raw)
Hello,
This series adds new DT bindings in YAML and two more sensor modes for users to call.
From the latest ov8856 datasheet, it is proposed to adopt the resolution of 1632*1224 and 3264*2448,
together with Bayer Order of BGGR. Here two more scenario settings are provided.
The hardware revision of ov8856 could be distinguished from one OTP SRAM register R700F.
PLL register R3614 requires to be correspondingly updated.
For instance, 0x20 is suggested for 1B camera module.
Finally, The driver has been validated in camera features on CrOS application.
Changes of V3 mainly address comments from Andy, Tomasz, Sakari, Rob.
- Convert text documentation to YAML schema.
- Enable VSYNC singal output
- Add ov8856_runtime_suspend() which would call __ov8856_power_off()
- Add ov8856_runtime_resume() which would call __ov8856_power_on()
- Fix other reviewed issues in V2
Mainly changes of V2 are addressing the comments from Sakari, Tomasz,
including,
- Add clock-frequency and link-frequencies in DT
- Re-define some macros like R3614, R3d84, n_shutdn
- Rename OV8856_MCLK to OV8856_XVCLK per datasheet
- Refine ov8856_update_otp_reg, ov8856_configure_regulators and ov8856_cal_delay
- Set the bayer order in the mode struct, and directly links to register R3808, R3809
- Remove or refine redundant log print
- Fix other reviewed issues in V1
Dongchun Zhu (2):
media: dt-bindings: ov8856: Document YAML bindings
media: i2c: ov8856: Add support for more sensor modes
.../devicetree/bindings/media/i2c/ov8856.yaml | 126 ++++
MAINTAINERS | 1 +
drivers/media/i2c/ov8856.c | 661 ++++++++++++++++++++-
3 files changed, 779 insertions(+), 9 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml
--
2.9.2
next reply other threads:[~2019-10-31 9:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-31 9:02 Dongchun Zhu [this message]
2019-10-31 9:02 ` [V3, 1/2] media: dt-bindings: ov8856: Document YAML bindings Dongchun Zhu
2019-10-31 16:38 ` Rob Herring
2019-10-31 9:02 ` [V3, 2/2] media: i2c: ov8856: Add support for more sensor modes Dongchun Zhu
2019-10-31 17:04 ` Sakari Ailus
2019-11-25 9:33 ` Pi-Hsun Shih
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191031090213.27727-1-dongchun.zhu@mediatek.com \
--to=dongchun.zhu@mediatek.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bingbu.cao@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=louis.kuo@mediatek.com \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=shengnan.wang@mediatek.com \
--cc=sj.huang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).