From: Neil Armstrong <narmstrong@baylibre.com>
To: mchehab@kernel.org, hans.verkuil@cisco.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-media@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/3] media: meson: vdec: Add compliant H264 support
Date: Tue, 26 Nov 2019 10:37:30 +0100 [thread overview]
Message-ID: <20191126093733.32404-1-narmstrong@baylibre.com> (raw)
Hello,
This patch series aims to bring H.264 support as well as compliance update
to the amlogic stateful video decoder driver.
The issue in the V1 patchset at [1] is solved by patch #1 following comments
and requirements from hans.
With this, it passes v4l2-compliance with streaming on Amlogic G12A and
Amlogic SM1 SoCs successfully.
This patchset depends on G12A and SM1 enablement series at [2] and [3].
The compliance log is:
# v4l2-compliance --stream-from-hdr test-25fps.h264.hdr -s 200
v4l2-compliance SHA: 7ead0e1856b89f2e19369af452bb03fd0cd16793, 64 bits
Compliance test for meson-vdec device /dev/video0:
Driver Info:
Driver name : meson-vdec
Card type : Amlogic Video Decoder
Bus info : platform:meson-vdec
Driver version : 5.4.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Detected Stateful Decoder
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 2 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Test input 0:
Streaming ioctls:
test read/write: OK (Not Supported)
test blocking wait: OK
Video Capture Multiplanar: Captured 200 buffers
test MMAP (select): OK
Video Capture Multiplanar: Captured 200 buffers
test MMAP (epoll): OK
test USERPTR (select): OK (Not Supported)
test DMABUF: Cannot test, specify --expbuf-device
Total for meson-vdec device /dev/video0: 49, Succeeded: 49, Failed: 0, Warnings: 0
Changes since v1 at [1]:
- fixed output_size is never used reported by hans
- rebased on G12A and SM1 patches
- added handling of qbuf after STREAMON and STOP before enought buffer queued
[1] https://lore.kernel.org/linux-media/20191007145909.29979-1-mjourdan@baylibre.com
[2] https://lore.kernel.org/linux-media/20191120111430.29552-1-narmstrong@baylibre.com
[3] https://lore.kernel.org/linux-media/20191121101429.23831-1-narmstrong@baylibre.com
Maxime Jourdan (2):
media: meson: vdec: bring up to compliance
media: meson: vdec: add H.264 decoding support
Neil Armstrong (1):
media: v4l2-mem2mem: mark DONE any OUTPUT queued buffer after CMD_STOP
drivers/media/v4l2-core/v4l2-mem2mem.c | 61 ++-
drivers/staging/media/meson/vdec/Makefile | 2 +-
drivers/staging/media/meson/vdec/codec_h264.c | 482 ++++++++++++++++++
drivers/staging/media/meson/vdec/codec_h264.h | 14 +
drivers/staging/media/meson/vdec/esparser.c | 58 +--
drivers/staging/media/meson/vdec/vdec.c | 92 ++--
drivers/staging/media/meson/vdec/vdec.h | 14 +-
.../staging/media/meson/vdec/vdec_helpers.c | 85 ++-
.../staging/media/meson/vdec/vdec_helpers.h | 6 +-
.../staging/media/meson/vdec/vdec_platform.c | 71 +++
include/media/v4l2-mem2mem.h | 14 +
11 files changed, 779 insertions(+), 120 deletions(-)
create mode 100644 drivers/staging/media/meson/vdec/codec_h264.c
create mode 100644 drivers/staging/media/meson/vdec/codec_h264.h
--
2.22.0
next reply other threads:[~2019-11-26 9:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-26 9:37 Neil Armstrong [this message]
2019-11-26 9:37 ` [PATCH v2 1/3] media: v4l2-mem2mem: mark DONE any OUTPUT queued buffer after CMD_STOP Neil Armstrong
2019-11-26 9:38 ` [PATCH v2 2/3] media: meson: vdec: bring up to compliance Neil Armstrong
2019-11-26 9:38 ` [PATCH v2 3/3] media: meson: vdec: add H.264 decoding support Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191126093733.32404-1-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=hans.verkuil@cisco.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).