* [PATCH] ivtv/cx18: remove ivtvdriver.org references
@ 2019-12-04 11:57 Hans Verkuil
2019-12-04 12:54 ` Andy Walls
2019-12-05 8:02 ` Sakari Ailus
0 siblings, 2 replies; 3+ messages in thread
From: Hans Verkuil @ 2019-12-04 11:57 UTC (permalink / raw)
To: Linux Media Mailing List; +Cc: Andy Walls, Sakari Ailus
That URL is no longer valid, so either remove references to it or
replace it with linuxtv.org.
Rather than updating the URL I've just dropped the cx18.rst driver
documentation since it was really out of date.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
---
.../media/uapi/v4l/pixfmt-reserved.rst | 3 +-
Documentation/media/v4l-drivers/cx18.rst | 39 -------------------
Documentation/media/v4l-drivers/index.rst | 1 -
MAINTAINERS | 6 +--
drivers/media/pci/cx18/cx18-cards.c | 8 ++--
drivers/media/pci/cx18/cx18-driver.c | 2 +-
drivers/media/pci/ivtv/Kconfig | 5 +--
drivers/media/pci/ivtv/ivtv-driver.c | 3 +-
drivers/media/pci/ivtv/ivtv-driver.h | 1 -
9 files changed, 10 insertions(+), 58 deletions(-)
delete mode 100644 Documentation/media/v4l-drivers/cx18.rst
diff --git a/Documentation/media/uapi/v4l/pixfmt-reserved.rst b/Documentation/media/uapi/v4l/pixfmt-reserved.rst
index b2cd155e691b..7d98a7bf9f1f 100644
--- a/Documentation/media/uapi/v4l/pixfmt-reserved.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-reserved.rst
@@ -55,8 +55,7 @@ please make a proposal on the linux-media mailing list.
- ``V4L2_PIX_FMT_HM12``
- 'HM12'
- - YUV 4:2:0 format used by the IVTV driver,
- `http://www.ivtvdriver.org/ <http://www.ivtvdriver.org/>`__
+ - YUV 4:2:0 format used by the IVTV driver.
The format is documented in the kernel sources in the file
``Documentation/media/v4l-drivers/cx2341x.rst``
diff --git a/Documentation/media/v4l-drivers/cx18.rst b/Documentation/media/v4l-drivers/cx18.rst
deleted file mode 100644
index 16895a734bae..000000000000
--- a/Documentation/media/v4l-drivers/cx18.rst
+++ /dev/null
@@ -1,39 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The cx18 driver
-===============
-
-.. note::
-
- This documentation is outdated.
-
-Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
-encoder chip:
-
-1) Currently supported are:
-
- - Hauppauge HVR-1600
- - Compro VideoMate H900
- - Yuan MPC718
- - Conexant Raptor PAL/SECAM devkit
-
-2) Some people have problems getting the i2c bus to work.
- The symptom is that the eeprom cannot be read and the card is
- unusable. This is probably fixed, but if you have problems
- then post to the video4linux or ivtv-users mailing list.
-
-3) VBI (raw or sliced) has not yet been implemented.
-
-4) MPEG indexing is not yet implemented.
-
-5) The driver is still a bit rough around the edges, this should
- improve over time.
-
-
-Firmware:
-
-You can obtain the firmware files here:
-
-http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz
-
-Untar and copy the .fw files to your firmware directory.
diff --git a/Documentation/media/v4l-drivers/index.rst b/Documentation/media/v4l-drivers/index.rst
index c4c78a28654c..b41fea23fe5d 100644
--- a/Documentation/media/v4l-drivers/index.rst
+++ b/Documentation/media/v4l-drivers/index.rst
@@ -38,7 +38,6 @@ For more details see the file COPYING in the source distribution of Linux.
bttv
cafe_ccic
cpia2
- cx18
cx2341x
cx88
davinci-vpbe
diff --git a/MAINTAINERS b/MAINTAINERS
index 37a977cbac6f..dcf45a59a183 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4398,13 +4398,10 @@ F: drivers/net/wireless/st/cw1200/
CX18 VIDEO4LINUX DRIVER
M: Andy Walls <awalls@md.metrocast.net>
-L: ivtv-devel@ivtvdriver.org (subscribers-only)
L: linux-media@vger.kernel.org
T: git git://linuxtv.org/media_tree.git
W: https://linuxtv.org
-W: http://www.ivtvdriver.org/index.php/Cx18
S: Maintained
-F: Documentation/media/v4l-drivers/cx18*
F: drivers/media/pci/cx18/
F: include/uapi/linux/ivtv*
@@ -8752,10 +8749,9 @@ F: drivers/media/tuners/it913x*
IVTV VIDEO4LINUX DRIVER
M: Andy Walls <awalls@md.metrocast.net>
-L: ivtv-devel@ivtvdriver.org (subscribers-only)
L: linux-media@vger.kernel.org
T: git git://linuxtv.org/media_tree.git
-W: http://www.ivtvdriver.org
+W: https://linuxtv.org
S: Maintained
F: Documentation/media/v4l-drivers/ivtv*
F: drivers/media/pci/ivtv/
diff --git a/drivers/media/pci/cx18/cx18-cards.c b/drivers/media/pci/cx18/cx18-cards.c
index cf118760d124..ecbe76f1ca63 100644
--- a/drivers/media/pci/cx18/cx18-cards.c
+++ b/drivers/media/pci/cx18/cx18-cards.c
@@ -245,7 +245,7 @@ static const struct cx18_card cx18_card_mpc718 = {
.type = CX18_CARD_YUAN_MPC718,
.name = "Yuan MPC718 MiniPCI DVB-T/Analog",
.comment = "Experimenters needed for device to work well.\n"
- "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+ "\tTo help, mail the linux-media list (www.linuxtv.org).\n",
.v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_418_AV,
.hw_muxer = CX18_HW_GPIO_MUX,
@@ -305,7 +305,7 @@ static const struct cx18_card cx18_card_gotview_dvd3 = {
.type = CX18_CARD_GOTVIEW_PCI_DVD3,
.name = "GoTView PCI DVD3 Hybrid",
.comment = "Experimenters needed for device to work well.\n"
- "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+ "\tTo help, mail the linux-media list (www.linuxtv.org).\n",
.v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_418_AV,
.hw_muxer = CX18_HW_GPIO_MUX,
@@ -419,7 +419,7 @@ static const struct cx18_card cx18_card_toshiba_qosmio_dvbt = {
.type = CX18_CARD_TOSHIBA_QOSMIO_DVBT,
.name = "Toshiba Qosmio DVB-T/Analog",
.comment = "Experimenters and photos needed for device to work well.\n"
- "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+ "\tTo help, mail the linux-media list (www.linuxtv.org).\n",
.v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_418_AV,
.hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL,
@@ -462,7 +462,7 @@ static const struct cx18_card cx18_card_leadtek_pvr2100 = {
.type = CX18_CARD_LEADTEK_PVR2100,
.name = "Leadtek WinFast PVR2100",
.comment = "Experimenters and photos needed for device to work well.\n"
- "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+ "\tTo help, mail the linux-media list (www.linuxtv.org).\n",
.v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_418_AV,
.hw_muxer = CX18_HW_GPIO_MUX,
diff --git a/drivers/media/pci/cx18/cx18-driver.c b/drivers/media/pci/cx18/cx18-driver.c
index fd47bd07ffd8..16119f4e9404 100644
--- a/drivers/media/pci/cx18/cx18-driver.c
+++ b/drivers/media/pci/cx18/cx18-driver.c
@@ -676,7 +676,7 @@ static void cx18_process_options(struct cx18 *cx)
cx->pci_dev->subsystem_device);
CX18_ERR("Defaulting to %s card\n", cx->card->name);
CX18_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
- CX18_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n");
+ CX18_ERR("card you have to the linux-media mailinglist (www.linuxtv.org)\n");
CX18_ERR("Prefix your subject line with [UNKNOWN CX18 CARD].\n");
}
cx->v4l2_cap = cx->card->v4l2_capabilities;
diff --git a/drivers/media/pci/ivtv/Kconfig b/drivers/media/pci/ivtv/Kconfig
index 36c089103cf9..c729e54692c4 100644
--- a/drivers/media/pci/ivtv/Kconfig
+++ b/drivers/media/pci/ivtv/Kconfig
@@ -24,7 +24,7 @@ config VIDEO_IVTV
PCI personal video recorder devices.
This is used in devices such as the Hauppauge PVR-150/250/350/500
- cards. There is a driver homepage at <http://www.ivtvdriver.org>.
+ cards.
To compile this driver as a module, choose M here: the
module will be called ivtv.
@@ -67,8 +67,7 @@ config VIDEO_FB_IVTV
This is a framebuffer driver for the Conexant cx23415 MPEG
encoder/decoder.
- This is used in the Hauppauge PVR-350 card. There is a driver
- homepage at <http://www.ivtvdriver.org>.
+ This is used in the Hauppauge PVR-350 card.
To compile this driver as a module, choose M here: the
module will be called ivtvfb.
diff --git a/drivers/media/pci/ivtv/ivtv-driver.c b/drivers/media/pci/ivtv/ivtv-driver.c
index 3f3f40ea890b..88dec72f29dc 100644
--- a/drivers/media/pci/ivtv/ivtv-driver.c
+++ b/drivers/media/pci/ivtv/ivtv-driver.c
@@ -23,7 +23,6 @@
* Driver for the Conexant CX23415/CX23416 chip.
* Author: Kevin Thayer (nufan_wfk at yahoo.com)
* License: GPL
- * http://www.ivtvdriver.org
*
* -----
* MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
@@ -723,7 +722,7 @@ static void ivtv_process_options(struct ivtv *itv)
IVTV_ERR(" %s based\n", chipname);
IVTV_ERR("Defaulting to %s card\n", itv->card->name);
IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
- IVTV_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n");
+ IVTV_ERR("card you have to the linux-media mailinglist (www.linuxtv.org)\n");
IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n");
}
itv->v4l2_cap = itv->card->v4l2_capabilities;
diff --git a/drivers/media/pci/ivtv/ivtv-driver.h b/drivers/media/pci/ivtv/ivtv-driver.h
index cafba6b1055d..e5efe525ad7b 100644
--- a/drivers/media/pci/ivtv/ivtv-driver.h
+++ b/drivers/media/pci/ivtv/ivtv-driver.h
@@ -28,7 +28,6 @@
* Driver for the cx23415/6 chip.
* Author: Kevin Thayer (nufan_wfk at yahoo.com)
* License: GPL
- * http://www.ivtvdriver.org
*
* -----
* MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
--
2.24.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ivtv/cx18: remove ivtvdriver.org references
2019-12-04 11:57 [PATCH] ivtv/cx18: remove ivtvdriver.org references Hans Verkuil
@ 2019-12-04 12:54 ` Andy Walls
2019-12-05 8:02 ` Sakari Ailus
1 sibling, 0 replies; 3+ messages in thread
From: Andy Walls @ 2019-12-04 12:54 UTC (permalink / raw)
To: Hans Verkuil, Linux Media Mailing List; +Cc: Sakari Ailus
On December 4, 2019 6:57:10 AM EST, Hans Verkuil <hverkuil@xs4all.nl> wrote:
>That URL is no longer valid, so either remove references to it or
>replace it with linuxtv.org.
>
>Rather than updating the URL I've just dropped the cx18.rst driver
>documentation since it was really out of date.
>
>Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
>---
> .../media/uapi/v4l/pixfmt-reserved.rst | 3 +-
> Documentation/media/v4l-drivers/cx18.rst | 39 -------------------
> Documentation/media/v4l-drivers/index.rst | 1 -
> MAINTAINERS | 6 +--
> drivers/media/pci/cx18/cx18-cards.c | 8 ++--
> drivers/media/pci/cx18/cx18-driver.c | 2 +-
> drivers/media/pci/ivtv/Kconfig | 5 +--
> drivers/media/pci/ivtv/ivtv-driver.c | 3 +-
> drivers/media/pci/ivtv/ivtv-driver.h | 1 -
> 9 files changed, 10 insertions(+), 58 deletions(-)
> delete mode 100644 Documentation/media/v4l-drivers/cx18.rst
>
>diff --git a/Documentation/media/uapi/v4l/pixfmt-reserved.rst
>b/Documentation/media/uapi/v4l/pixfmt-reserved.rst
>index b2cd155e691b..7d98a7bf9f1f 100644
>--- a/Documentation/media/uapi/v4l/pixfmt-reserved.rst
>+++ b/Documentation/media/uapi/v4l/pixfmt-reserved.rst
>@@ -55,8 +55,7 @@ please make a proposal on the linux-media mailing
>list.
>
> - ``V4L2_PIX_FMT_HM12``
> - 'HM12'
>- - YUV 4:2:0 format used by the IVTV driver,
>- `http://www.ivtvdriver.org/ <http://www.ivtvdriver.org/>`__
>+ - YUV 4:2:0 format used by the IVTV driver.
>
> The format is documented in the kernel sources in the file
> ``Documentation/media/v4l-drivers/cx2341x.rst``
>diff --git a/Documentation/media/v4l-drivers/cx18.rst
>b/Documentation/media/v4l-drivers/cx18.rst
>deleted file mode 100644
>index 16895a734bae..000000000000
>--- a/Documentation/media/v4l-drivers/cx18.rst
>+++ /dev/null
>@@ -1,39 +0,0 @@
>-.. SPDX-License-Identifier: GPL-2.0
>-
>-The cx18 driver
>-===============
>-
>-.. note::
>-
>- This documentation is outdated.
>-
>-Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
>-encoder chip:
>-
>-1) Currently supported are:
>-
>- - Hauppauge HVR-1600
>- - Compro VideoMate H900
>- - Yuan MPC718
>- - Conexant Raptor PAL/SECAM devkit
>-
>-2) Some people have problems getting the i2c bus to work.
>- The symptom is that the eeprom cannot be read and the card is
>- unusable. This is probably fixed, but if you have problems
>- then post to the video4linux or ivtv-users mailing list.
>-
>-3) VBI (raw or sliced) has not yet been implemented.
>-
>-4) MPEG indexing is not yet implemented.
>-
>-5) The driver is still a bit rough around the edges, this should
>- improve over time.
>-
>-
>-Firmware:
>-
>-You can obtain the firmware files here:
>-
>-http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz
>-
>-Untar and copy the .fw files to your firmware directory.
>diff --git a/Documentation/media/v4l-drivers/index.rst
>b/Documentation/media/v4l-drivers/index.rst
>index c4c78a28654c..b41fea23fe5d 100644
>--- a/Documentation/media/v4l-drivers/index.rst
>+++ b/Documentation/media/v4l-drivers/index.rst
>@@ -38,7 +38,6 @@ For more details see the file COPYING in the source
>distribution of Linux.
> bttv
> cafe_ccic
> cpia2
>- cx18
> cx2341x
> cx88
> davinci-vpbe
>diff --git a/MAINTAINERS b/MAINTAINERS
>index 37a977cbac6f..dcf45a59a183 100644
>--- a/MAINTAINERS
>+++ b/MAINTAINERS
>@@ -4398,13 +4398,10 @@ F: drivers/net/wireless/st/cw1200/
>
> CX18 VIDEO4LINUX DRIVER
> M: Andy Walls <awalls@md.metrocast.net>
>-L: ivtv-devel@ivtvdriver.org (subscribers-only)
> L: linux-media@vger.kernel.org
> T: git git://linuxtv.org/media_tree.git
> W: https://linuxtv.org
>-W: http://www.ivtvdriver.org/index.php/Cx18
> S: Maintained
>-F: Documentation/media/v4l-drivers/cx18*
> F: drivers/media/pci/cx18/
> F: include/uapi/linux/ivtv*
>
>@@ -8752,10 +8749,9 @@ F: drivers/media/tuners/it913x*
>
> IVTV VIDEO4LINUX DRIVER
> M: Andy Walls <awalls@md.metrocast.net>
>-L: ivtv-devel@ivtvdriver.org (subscribers-only)
> L: linux-media@vger.kernel.org
> T: git git://linuxtv.org/media_tree.git
>-W: http://www.ivtvdriver.org
>+W: https://linuxtv.org
> S: Maintained
> F: Documentation/media/v4l-drivers/ivtv*
> F: drivers/media/pci/ivtv/
>diff --git a/drivers/media/pci/cx18/cx18-cards.c
>b/drivers/media/pci/cx18/cx18-cards.c
>index cf118760d124..ecbe76f1ca63 100644
>--- a/drivers/media/pci/cx18/cx18-cards.c
>+++ b/drivers/media/pci/cx18/cx18-cards.c
>@@ -245,7 +245,7 @@ static const struct cx18_card cx18_card_mpc718 = {
> .type = CX18_CARD_YUAN_MPC718,
> .name = "Yuan MPC718 MiniPCI DVB-T/Analog",
> .comment = "Experimenters needed for device to work well.\n"
>- "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
>+ "\tTo help, mail the linux-media list (www.linuxtv.org).\n",
> .v4l2_capabilities = CX18_CAP_ENCODER,
> .hw_audio_ctrl = CX18_HW_418_AV,
> .hw_muxer = CX18_HW_GPIO_MUX,
>@@ -305,7 +305,7 @@ static const struct cx18_card
>cx18_card_gotview_dvd3 = {
> .type = CX18_CARD_GOTVIEW_PCI_DVD3,
> .name = "GoTView PCI DVD3 Hybrid",
> .comment = "Experimenters needed for device to work well.\n"
>- "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
>+ "\tTo help, mail the linux-media list (www.linuxtv.org).\n",
> .v4l2_capabilities = CX18_CAP_ENCODER,
> .hw_audio_ctrl = CX18_HW_418_AV,
> .hw_muxer = CX18_HW_GPIO_MUX,
>@@ -419,7 +419,7 @@ static const struct cx18_card
>cx18_card_toshiba_qosmio_dvbt = {
> .type = CX18_CARD_TOSHIBA_QOSMIO_DVBT,
> .name = "Toshiba Qosmio DVB-T/Analog",
> .comment = "Experimenters and photos needed for device to work
>well.\n"
>- "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
>+ "\tTo help, mail the linux-media list (www.linuxtv.org).\n",
> .v4l2_capabilities = CX18_CAP_ENCODER,
> .hw_audio_ctrl = CX18_HW_418_AV,
> .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL,
>@@ -462,7 +462,7 @@ static const struct cx18_card
>cx18_card_leadtek_pvr2100 = {
> .type = CX18_CARD_LEADTEK_PVR2100,
> .name = "Leadtek WinFast PVR2100",
> .comment = "Experimenters and photos needed for device to work
>well.\n"
>- "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
>+ "\tTo help, mail the linux-media list (www.linuxtv.org).\n",
> .v4l2_capabilities = CX18_CAP_ENCODER,
> .hw_audio_ctrl = CX18_HW_418_AV,
> .hw_muxer = CX18_HW_GPIO_MUX,
>diff --git a/drivers/media/pci/cx18/cx18-driver.c
>b/drivers/media/pci/cx18/cx18-driver.c
>index fd47bd07ffd8..16119f4e9404 100644
>--- a/drivers/media/pci/cx18/cx18-driver.c
>+++ b/drivers/media/pci/cx18/cx18-driver.c
>@@ -676,7 +676,7 @@ static void cx18_process_options(struct cx18 *cx)
> cx->pci_dev->subsystem_device);
> CX18_ERR("Defaulting to %s card\n", cx->card->name);
> CX18_ERR("Please mail the vendor/device and subsystem vendor/device
>IDs and what kind of\n");
>- CX18_ERR("card you have to the ivtv-devel mailinglist
>(www.ivtvdriver.org)\n");
>+ CX18_ERR("card you have to the linux-media mailinglist
>(www.linuxtv.org)\n");
> CX18_ERR("Prefix your subject line with [UNKNOWN CX18 CARD].\n");
> }
> cx->v4l2_cap = cx->card->v4l2_capabilities;
>diff --git a/drivers/media/pci/ivtv/Kconfig
>b/drivers/media/pci/ivtv/Kconfig
>index 36c089103cf9..c729e54692c4 100644
>--- a/drivers/media/pci/ivtv/Kconfig
>+++ b/drivers/media/pci/ivtv/Kconfig
>@@ -24,7 +24,7 @@ config VIDEO_IVTV
> PCI personal video recorder devices.
>
> This is used in devices such as the Hauppauge PVR-150/250/350/500
>- cards. There is a driver homepage at <http://www.ivtvdriver.org>.
>+ cards.
>
> To compile this driver as a module, choose M here: the
> module will be called ivtv.
>@@ -67,8 +67,7 @@ config VIDEO_FB_IVTV
> This is a framebuffer driver for the Conexant cx23415 MPEG
> encoder/decoder.
>
>- This is used in the Hauppauge PVR-350 card. There is a driver
>- homepage at <http://www.ivtvdriver.org>.
>+ This is used in the Hauppauge PVR-350 card.
>
> To compile this driver as a module, choose M here: the
> module will be called ivtvfb.
>diff --git a/drivers/media/pci/ivtv/ivtv-driver.c
>b/drivers/media/pci/ivtv/ivtv-driver.c
>index 3f3f40ea890b..88dec72f29dc 100644
>--- a/drivers/media/pci/ivtv/ivtv-driver.c
>+++ b/drivers/media/pci/ivtv/ivtv-driver.c
>@@ -23,7 +23,6 @@
> * Driver for the Conexant CX23415/CX23416 chip.
> * Author: Kevin Thayer (nufan_wfk at yahoo.com)
> * License: GPL
>- * http://www.ivtvdriver.org
> *
> * -----
> * MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
>@@ -723,7 +722,7 @@ static void ivtv_process_options(struct ivtv *itv)
> IVTV_ERR(" %s based\n", chipname);
> IVTV_ERR("Defaulting to %s card\n", itv->card->name);
> IVTV_ERR("Please mail the vendor/device and subsystem vendor/device
>IDs and what kind of\n");
>- IVTV_ERR("card you have to the ivtv-devel mailinglist
>(www.ivtvdriver.org)\n");
>+ IVTV_ERR("card you have to the linux-media mailinglist
>(www.linuxtv.org)\n");
> IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n");
> }
> itv->v4l2_cap = itv->card->v4l2_capabilities;
>diff --git a/drivers/media/pci/ivtv/ivtv-driver.h
>b/drivers/media/pci/ivtv/ivtv-driver.h
>index cafba6b1055d..e5efe525ad7b 100644
>--- a/drivers/media/pci/ivtv/ivtv-driver.h
>+++ b/drivers/media/pci/ivtv/ivtv-driver.h
>@@ -28,7 +28,6 @@
> * Driver for the cx23415/6 chip.
> * Author: Kevin Thayer (nufan_wfk at yahoo.com)
> * License: GPL
>- * http://www.ivtvdriver.org
> *
> * -----
> * MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
Acked-By: awalls@md.metrocast.net
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ivtv/cx18: remove ivtvdriver.org references
2019-12-04 11:57 [PATCH] ivtv/cx18: remove ivtvdriver.org references Hans Verkuil
2019-12-04 12:54 ` Andy Walls
@ 2019-12-05 8:02 ` Sakari Ailus
1 sibling, 0 replies; 3+ messages in thread
From: Sakari Ailus @ 2019-12-05 8:02 UTC (permalink / raw)
To: Hans Verkuil; +Cc: Linux Media Mailing List, Andy Walls
On Wed, Dec 04, 2019 at 12:57:10PM +0100, Hans Verkuil wrote:
> That URL is no longer valid, so either remove references to it or
> replace it with linuxtv.org.
>
> Rather than updating the URL I've just dropped the cx18.rst driver
> documentation since it was really out of date.
>
> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Thanks!
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
--
Sakari Ailus
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-12-05 8:02 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-04 11:57 [PATCH] ivtv/cx18: remove ivtvdriver.org references Hans Verkuil
2019-12-04 12:54 ` Andy Walls
2019-12-05 8:02 ` Sakari Ailus
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).