* [PATCH] vimc: debayer: Add support for ARGB format @ 2020-05-28 18:57 Kaaira Gupta 2020-05-29 15:43 ` Dafna Hirschfeld 0 siblings, 1 reply; 13+ messages in thread From: Kaaira Gupta @ 2020-05-28 18:57 UTC (permalink / raw) To: Helen Koike, Shuah Khan, Mauro Carvalho Chehab, linux-media, linux-kernel, kieran.bingham Running qcam for pixelformat 0x34324142 showed that vimc debayer does not support it. Hence, add the support for Alpha (255). Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> --- .../media/test-drivers/vimc/vimc-debayer.c | 27 ++++++++++++------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/drivers/media/test-drivers/vimc/vimc-debayer.c b/drivers/media/test-drivers/vimc/vimc-debayer.c index c3f6fef34f68..f34148717a40 100644 --- a/drivers/media/test-drivers/vimc/vimc-debayer.c +++ b/drivers/media/test-drivers/vimc/vimc-debayer.c @@ -62,6 +62,7 @@ static const u32 vimc_deb_src_mbus_codes[] = { MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, MEDIA_BUS_FMT_RGB888_1X32_PADHI, + MEDIA_BUS_FMT_ARGB8888_1X32 }; static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { @@ -322,15 +323,23 @@ static void vimc_deb_process_rgb_frame(struct vimc_deb_device *vdeb, unsigned int i, index; vpix = vimc_pix_map_by_code(vdeb->src_code); - index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); - for (i = 0; i < 3; i++) { - switch (vpix->pixelformat) { - case V4L2_PIX_FMT_RGB24: - vdeb->src_frame[index + i] = rgb[i]; - break; - case V4L2_PIX_FMT_BGR24: - vdeb->src_frame[index + i] = rgb[2 - i]; - break; + + if (vpix->pixelformat == V4L2_PIX_FMT_ARGB32) { + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 4); + vdeb->src_frame[index] = 255; + for (i = 0; i < 3; i++) + vdeb->src_frame[index + i + 1] = rgb[i]; + } else { + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); + for (i = 0; i < 3; i++) { + switch (vpix->pixelformat) { + case V4L2_PIX_FMT_RGB24: + vdeb->src_frame[index + i] = rgb[i]; + break; + case V4L2_PIX_FMT_BGR24: + vdeb->src_frame[index + i] = rgb[2 - i]; + break; + } } } } -- 2.17.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH] vimc: debayer: Add support for ARGB format 2020-05-28 18:57 [PATCH] vimc: debayer: Add support for ARGB format Kaaira Gupta @ 2020-05-29 15:43 ` Dafna Hirschfeld 2020-06-01 12:16 ` Kaaira Gupta 0 siblings, 1 reply; 13+ messages in thread From: Dafna Hirschfeld @ 2020-05-29 15:43 UTC (permalink / raw) To: Kaaira Gupta, Helen Koike, Shuah Khan, Mauro Carvalho Chehab, linux-media, linux-kernel, kieran.bingham, dafna Hirschfeld Hi, Thanks for the patch I don't know how real devices handle ARGB formats, I wonder if it should be the part of the debayer. On 28.05.20 20:57, Kaaira Gupta wrote: > Running qcam for pixelformat 0x34324142 showed that vimc debayer does > not support it. Hence, add the support for Alpha (255). I would change the commit log to: Add support for V4L2_PIX_FMT_RGB24 format in the debayer and set the alpha channel to constant 255. Thanks, Dafna > > Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> > --- > .../media/test-drivers/vimc/vimc-debayer.c | 27 ++++++++++++------- > 1 file changed, 18 insertions(+), 9 deletions(-) > > diff --git a/drivers/media/test-drivers/vimc/vimc-debayer.c b/drivers/media/test-drivers/vimc/vimc-debayer.c > index c3f6fef34f68..f34148717a40 100644 > --- a/drivers/media/test-drivers/vimc/vimc-debayer.c > +++ b/drivers/media/test-drivers/vimc/vimc-debayer.c > @@ -62,6 +62,7 @@ static const u32 vimc_deb_src_mbus_codes[] = { > MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, > MEDIA_BUS_FMT_RGB888_1X32_PADHI, > + MEDIA_BUS_FMT_ARGB8888_1X32 > }; > > static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { > @@ -322,15 +323,23 @@ static void vimc_deb_process_rgb_frame(struct vimc_deb_device *vdeb, > unsigned int i, index; > > vpix = vimc_pix_map_by_code(vdeb->src_code); > - index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); > - for (i = 0; i < 3; i++) { > - switch (vpix->pixelformat) { > - case V4L2_PIX_FMT_RGB24: > - vdeb->src_frame[index + i] = rgb[i]; > - break; > - case V4L2_PIX_FMT_BGR24: > - vdeb->src_frame[index + i] = rgb[2 - i]; > - break; > + > + if (vpix->pixelformat == V4L2_PIX_FMT_ARGB32) { > + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 4); > + vdeb->src_frame[index] = 255; > + for (i = 0; i < 3; i++) > + vdeb->src_frame[index + i + 1] = rgb[i]; > + } else { > + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); > + for (i = 0; i < 3; i++) { > + switch (vpix->pixelformat) { > + case V4L2_PIX_FMT_RGB24: > + vdeb->src_frame[index + i] = rgb[i]; > + break; > + case V4L2_PIX_FMT_BGR24: > + vdeb->src_frame[index + i] = rgb[2 - i]; > + break; > + } > } > } > } > ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH] vimc: debayer: Add support for ARGB format 2020-05-29 15:43 ` Dafna Hirschfeld @ 2020-06-01 12:16 ` Kaaira Gupta 2020-06-01 12:37 ` Laurent Pinchart 2020-06-02 10:52 ` Dafna Hirschfeld 0 siblings, 2 replies; 13+ messages in thread From: Kaaira Gupta @ 2020-06-01 12:16 UTC (permalink / raw) To: Dafna Hirschfeld Cc: Helen Koike, Shuah Khan, laurent.pinchart, Mauro Carvalho Chehab, linux-media, linux-kernel, kieran.bingham, dafna Hirschfeld On Fri, May 29, 2020 at 05:43:57PM +0200, Dafna Hirschfeld wrote: > Hi, > Thanks for the patch > > I don't know how real devices handle ARGB formats, > I wonder if it should be the part of the debayer. Hi! qcam tries to support BA24 as it is one of the formats that vimc lists as its supported formats wih --list-formats. Shouldn't BA24 be possible to capture with vimc? If yes, which entity should support it, if not debayer? Should there be a separate conversion entity, or should we keep the support in debayer itself for efficiency issues? > > > On 28.05.20 20:57, Kaaira Gupta wrote: > > Running qcam for pixelformat 0x34324142 showed that vimc debayer does > > not support it. Hence, add the support for Alpha (255). > > I would change the commit log to: > > Add support for V4L2_PIX_FMT_RGB24 format in the debayer > and set the alpha channel to constant 255. > > Thanks, > Dafna > > > > > Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> > > --- > > .../media/test-drivers/vimc/vimc-debayer.c | 27 ++++++++++++------- > > 1 file changed, 18 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/media/test-drivers/vimc/vimc-debayer.c b/drivers/media/test-drivers/vimc/vimc-debayer.c > > index c3f6fef34f68..f34148717a40 100644 > > --- a/drivers/media/test-drivers/vimc/vimc-debayer.c > > +++ b/drivers/media/test-drivers/vimc/vimc-debayer.c > > @@ -62,6 +62,7 @@ static const u32 vimc_deb_src_mbus_codes[] = { > > MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > > MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, > > MEDIA_BUS_FMT_RGB888_1X32_PADHI, > > + MEDIA_BUS_FMT_ARGB8888_1X32 > > }; > > static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { > > @@ -322,15 +323,23 @@ static void vimc_deb_process_rgb_frame(struct vimc_deb_device *vdeb, > > unsigned int i, index; > > vpix = vimc_pix_map_by_code(vdeb->src_code); > > - index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); > > - for (i = 0; i < 3; i++) { > > - switch (vpix->pixelformat) { > > - case V4L2_PIX_FMT_RGB24: > > - vdeb->src_frame[index + i] = rgb[i]; > > - break; > > - case V4L2_PIX_FMT_BGR24: > > - vdeb->src_frame[index + i] = rgb[2 - i]; > > - break; > > + > > + if (vpix->pixelformat == V4L2_PIX_FMT_ARGB32) { > > + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 4); > > + vdeb->src_frame[index] = 255; > > + for (i = 0; i < 3; i++) > > + vdeb->src_frame[index + i + 1] = rgb[i]; > > + } else { > > + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); > > + for (i = 0; i < 3; i++) { > > + switch (vpix->pixelformat) { > > + case V4L2_PIX_FMT_RGB24: > > + vdeb->src_frame[index + i] = rgb[i]; > > + break; > > + case V4L2_PIX_FMT_BGR24: > > + vdeb->src_frame[index + i] = rgb[2 - i]; > > + break; > > + } > > } > > } > > } > > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] vimc: debayer: Add support for ARGB format 2020-06-01 12:16 ` Kaaira Gupta @ 2020-06-01 12:37 ` Laurent Pinchart 2020-06-01 16:27 ` Helen Koike 2020-06-02 10:52 ` Dafna Hirschfeld 1 sibling, 1 reply; 13+ messages in thread From: Laurent Pinchart @ 2020-06-01 12:37 UTC (permalink / raw) To: Kaaira Gupta Cc: Dafna Hirschfeld, Helen Koike, Shuah Khan, Mauro Carvalho Chehab, linux-media, linux-kernel, kieran.bingham, dafna Hirschfeld On Mon, Jun 01, 2020 at 05:46:26PM +0530, Kaaira Gupta wrote: > On Fri, May 29, 2020 at 05:43:57PM +0200, Dafna Hirschfeld wrote: > > Hi, > > Thanks for the patch > > > > I don't know how real devices handle ARGB formats, > > I wonder if it should be the part of the debayer. > > Hi! qcam tries to support BA24 as it is one of the formats that vimc > lists as its supported formats wih --list-formats. Shouldn't BA24 be > possible to capture with vimc? > > If yes, which entity should support it, if not debayer? Should there be > a separate conversion entity, or should we keep the support in debayer > itself for efficiency issues? At the hardware level, the de-bayering block usually produces RGB with 8 or more bits per colour components (so 3xn, 24 bits for 8-bit depths). The conversion to 32-bit ARGB usually happens at the DMA engine level, in the formatter right in front of the DMA engine. Ideally the vimc pipeline should expose the same. From a performance point of view, it makes little sense to process the image in vimc through multiple steps. I think it would be best to generate the final image directly at the output of the pipeline. > > On 28.05.20 20:57, Kaaira Gupta wrote: > > > Running qcam for pixelformat 0x34324142 showed that vimc debayer does > > > not support it. Hence, add the support for Alpha (255). > > > > I would change the commit log to: > > > > Add support for V4L2_PIX_FMT_RGB24 format in the debayer > > and set the alpha channel to constant 255. > > > > > Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> > > > --- > > > .../media/test-drivers/vimc/vimc-debayer.c | 27 ++++++++++++------- > > > 1 file changed, 18 insertions(+), 9 deletions(-) > > > > > > diff --git a/drivers/media/test-drivers/vimc/vimc-debayer.c b/drivers/media/test-drivers/vimc/vimc-debayer.c > > > index c3f6fef34f68..f34148717a40 100644 > > > --- a/drivers/media/test-drivers/vimc/vimc-debayer.c > > > +++ b/drivers/media/test-drivers/vimc/vimc-debayer.c > > > @@ -62,6 +62,7 @@ static const u32 vimc_deb_src_mbus_codes[] = { > > > MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > > > MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, > > > MEDIA_BUS_FMT_RGB888_1X32_PADHI, > > > + MEDIA_BUS_FMT_ARGB8888_1X32 > > > }; > > > static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { > > > @@ -322,15 +323,23 @@ static void vimc_deb_process_rgb_frame(struct vimc_deb_device *vdeb, > > > unsigned int i, index; > > > vpix = vimc_pix_map_by_code(vdeb->src_code); > > > - index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); > > > - for (i = 0; i < 3; i++) { > > > - switch (vpix->pixelformat) { > > > - case V4L2_PIX_FMT_RGB24: > > > - vdeb->src_frame[index + i] = rgb[i]; > > > - break; > > > - case V4L2_PIX_FMT_BGR24: > > > - vdeb->src_frame[index + i] = rgb[2 - i]; > > > - break; > > > + > > > + if (vpix->pixelformat == V4L2_PIX_FMT_ARGB32) { > > > + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 4); > > > + vdeb->src_frame[index] = 255; > > > + for (i = 0; i < 3; i++) > > > + vdeb->src_frame[index + i + 1] = rgb[i]; > > > + } else { > > > + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); > > > + for (i = 0; i < 3; i++) { > > > + switch (vpix->pixelformat) { > > > + case V4L2_PIX_FMT_RGB24: > > > + vdeb->src_frame[index + i] = rgb[i]; > > > + break; > > > + case V4L2_PIX_FMT_BGR24: > > > + vdeb->src_frame[index + i] = rgb[2 - i]; > > > + break; > > > + } > > > } > > > } > > > } -- Regards, Laurent Pinchart ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] vimc: debayer: Add support for ARGB format 2020-06-01 12:37 ` Laurent Pinchart @ 2020-06-01 16:27 ` Helen Koike 0 siblings, 0 replies; 13+ messages in thread From: Helen Koike @ 2020-06-01 16:27 UTC (permalink / raw) To: Laurent Pinchart, Kaaira Gupta Cc: Dafna Hirschfeld, Shuah Khan, Mauro Carvalho Chehab, linux-media, linux-kernel, kieran.bingham, dafna Hirschfeld, Lucas Magalhães On 6/1/20 9:37 AM, Laurent Pinchart wrote: > On Mon, Jun 01, 2020 at 05:46:26PM +0530, Kaaira Gupta wrote: >> On Fri, May 29, 2020 at 05:43:57PM +0200, Dafna Hirschfeld wrote: >>> Hi, >>> Thanks for the patch >>> >>> I don't know how real devices handle ARGB formats, >>> I wonder if it should be the part of the debayer. >> >> Hi! qcam tries to support BA24 as it is one of the formats that vimc >> lists as its supported formats wih --list-formats. Shouldn't BA24 be >> possible to capture with vimc? >> >> If yes, which entity should support it, if not debayer? Should there be >> a separate conversion entity, or should we keep the support in debayer >> itself for efficiency issues? > > At the hardware level, the de-bayering block usually produces RGB with 8 > or more bits per colour components (so 3xn, 24 bits for 8-bit depths). > The conversion to 32-bit ARGB usually happens at the DMA engine level, > in the formatter right in front of the DMA engine. Ideally the vimc > pipeline should expose the same. > > From a performance point of view, it makes little sense to process the > image in vimc through multiple steps. I think it would be best to > generate the final image directly at the output of the pipeline. [+ Lucas Magalhães] Lucas was working on a patch for that, he sent an RFC[1] some time ago. [1] https://patchwork.linuxtv.org/patch/60445/ It would be nice to have this indeed. Regards, Helen > >>> On 28.05.20 20:57, Kaaira Gupta wrote: >>>> Running qcam for pixelformat 0x34324142 showed that vimc debayer does >>>> not support it. Hence, add the support for Alpha (255). >>> >>> I would change the commit log to: >>> >>> Add support for V4L2_PIX_FMT_RGB24 format in the debayer >>> and set the alpha channel to constant 255. >>> >>>> Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> >>>> --- >>>> .../media/test-drivers/vimc/vimc-debayer.c | 27 ++++++++++++------- >>>> 1 file changed, 18 insertions(+), 9 deletions(-) >>>> >>>> diff --git a/drivers/media/test-drivers/vimc/vimc-debayer.c b/drivers/media/test-drivers/vimc/vimc-debayer.c >>>> index c3f6fef34f68..f34148717a40 100644 >>>> --- a/drivers/media/test-drivers/vimc/vimc-debayer.c >>>> +++ b/drivers/media/test-drivers/vimc/vimc-debayer.c >>>> @@ -62,6 +62,7 @@ static const u32 vimc_deb_src_mbus_codes[] = { >>>> MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, >>>> MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, >>>> MEDIA_BUS_FMT_RGB888_1X32_PADHI, >>>> + MEDIA_BUS_FMT_ARGB8888_1X32 >>>> }; >>>> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { >>>> @@ -322,15 +323,23 @@ static void vimc_deb_process_rgb_frame(struct vimc_deb_device *vdeb, >>>> unsigned int i, index; >>>> vpix = vimc_pix_map_by_code(vdeb->src_code); >>>> - index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>>> - for (i = 0; i < 3; i++) { >>>> - switch (vpix->pixelformat) { >>>> - case V4L2_PIX_FMT_RGB24: >>>> - vdeb->src_frame[index + i] = rgb[i]; >>>> - break; >>>> - case V4L2_PIX_FMT_BGR24: >>>> - vdeb->src_frame[index + i] = rgb[2 - i]; >>>> - break; >>>> + >>>> + if (vpix->pixelformat == V4L2_PIX_FMT_ARGB32) { >>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 4); >>>> + vdeb->src_frame[index] = 255; >>>> + for (i = 0; i < 3; i++) >>>> + vdeb->src_frame[index + i + 1] = rgb[i]; >>>> + } else { >>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>>> + for (i = 0; i < 3; i++) { >>>> + switch (vpix->pixelformat) { >>>> + case V4L2_PIX_FMT_RGB24: >>>> + vdeb->src_frame[index + i] = rgb[i]; >>>> + break; >>>> + case V4L2_PIX_FMT_BGR24: >>>> + vdeb->src_frame[index + i] = rgb[2 - i]; >>>> + break; >>>> + } >>>> } >>>> } >>>> } > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] vimc: debayer: Add support for ARGB format 2020-06-01 12:16 ` Kaaira Gupta 2020-06-01 12:37 ` Laurent Pinchart @ 2020-06-02 10:52 ` Dafna Hirschfeld 2020-06-02 10:55 ` Helen Koike 1 sibling, 1 reply; 13+ messages in thread From: Dafna Hirschfeld @ 2020-06-02 10:52 UTC (permalink / raw) To: Kaaira Gupta Cc: Helen Koike, Shuah Khan, laurent.pinchart, Mauro Carvalho Chehab, linux-media, linux-kernel, kieran.bingham, dafna Hirschfeld On 01.06.20 14:16, Kaaira Gupta wrote: > On Fri, May 29, 2020 at 05:43:57PM +0200, Dafna Hirschfeld wrote: >> Hi, >> Thanks for the patch >> >> I don't know how real devices handle ARGB formats, >> I wonder if it should be the part of the debayer. > > Hi! qcam tries to support BA24 as it is one of the formats that vimc > lists as its supported formats wih --list-formats. Shouldn't BA24 be > possible to capture with vimc? Hi, Just to clarify, when listing the supported formats of a video node, the node lists the formats that the video node as an independent media entity support. It does not mean that the 'camera' as a whole (that is, the media topology graph) supports all the formats that the video node lists. When interacting with a video node or a subdevice node, one interacts only with that specific entity. In the case of vimc, the RGB video node as an independent entity supports BA24 so the format appears in the list of the its supported formats. But since the Debayer does not support it, the format can not be generated by the entire vimc topology. This is not a bug. Hope t was helpful, Dafna > > If yes, which entity should support it, if not debayer? Should there be > a separate conversion entity, or should we keep the support in debayer > itself for efficiency issues? > >> >> >> On 28.05.20 20:57, Kaaira Gupta wrote: >>> Running qcam for pixelformat 0x34324142 showed that vimc debayer does >>> not support it. Hence, add the support for Alpha (255). >> >> I would change the commit log to: >> >> Add support for V4L2_PIX_FMT_RGB24 format in the debayer >> and set the alpha channel to constant 255. >> >> Thanks, >> Dafna >> >>> >>> Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> >>> --- >>> .../media/test-drivers/vimc/vimc-debayer.c | 27 ++++++++++++------- >>> 1 file changed, 18 insertions(+), 9 deletions(-) >>> >>> diff --git a/drivers/media/test-drivers/vimc/vimc-debayer.c b/drivers/media/test-drivers/vimc/vimc-debayer.c >>> index c3f6fef34f68..f34148717a40 100644 >>> --- a/drivers/media/test-drivers/vimc/vimc-debayer.c >>> +++ b/drivers/media/test-drivers/vimc/vimc-debayer.c >>> @@ -62,6 +62,7 @@ static const u32 vimc_deb_src_mbus_codes[] = { >>> MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, >>> MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, >>> MEDIA_BUS_FMT_RGB888_1X32_PADHI, >>> + MEDIA_BUS_FMT_ARGB8888_1X32 >>> }; >>> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { >>> @@ -322,15 +323,23 @@ static void vimc_deb_process_rgb_frame(struct vimc_deb_device *vdeb, >>> unsigned int i, index; >>> vpix = vimc_pix_map_by_code(vdeb->src_code); >>> - index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>> - for (i = 0; i < 3; i++) { >>> - switch (vpix->pixelformat) { >>> - case V4L2_PIX_FMT_RGB24: >>> - vdeb->src_frame[index + i] = rgb[i]; >>> - break; >>> - case V4L2_PIX_FMT_BGR24: >>> - vdeb->src_frame[index + i] = rgb[2 - i]; >>> - break; >>> + >>> + if (vpix->pixelformat == V4L2_PIX_FMT_ARGB32) { >>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 4); >>> + vdeb->src_frame[index] = 255; >>> + for (i = 0; i < 3; i++) >>> + vdeb->src_frame[index + i + 1] = rgb[i]; >>> + } else { >>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>> + for (i = 0; i < 3; i++) { >>> + switch (vpix->pixelformat) { >>> + case V4L2_PIX_FMT_RGB24: >>> + vdeb->src_frame[index + i] = rgb[i]; >>> + break; >>> + case V4L2_PIX_FMT_BGR24: >>> + vdeb->src_frame[index + i] = rgb[2 - i]; >>> + break; >>> + } >>> } >>> } >>> } >>> ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] vimc: debayer: Add support for ARGB format 2020-06-02 10:52 ` Dafna Hirschfeld @ 2020-06-02 10:55 ` Helen Koike 2020-06-02 11:24 ` Kieran Bingham 0 siblings, 1 reply; 13+ messages in thread From: Helen Koike @ 2020-06-02 10:55 UTC (permalink / raw) To: Dafna Hirschfeld, Kaaira Gupta Cc: Shuah Khan, laurent.pinchart, Mauro Carvalho Chehab, linux-media, linux-kernel, kieran.bingham, dafna Hirschfeld On 6/2/20 7:52 AM, Dafna Hirschfeld wrote: > > > On 01.06.20 14:16, Kaaira Gupta wrote: >> On Fri, May 29, 2020 at 05:43:57PM +0200, Dafna Hirschfeld wrote: >>> Hi, >>> Thanks for the patch >>> >>> I don't know how real devices handle ARGB formats, >>> I wonder if it should be the part of the debayer. >> >> Hi! qcam tries to support BA24 as it is one of the formats that vimc >> lists as its supported formats wih --list-formats. Shouldn't BA24 be >> possible to capture with vimc? > > Hi, > Just to clarify, when listing the supported formats of a video node, the node lists > the formats that the video node as an independent media entity support. > It does not mean that the 'camera' as a whole (that is, the media topology graph) supports > all the formats that the video node lists. When interacting with a video node or > a subdevice node, one interacts only with that specific entity. > In the case of vimc, the RGB video node as an independent entity supports BA24 so the format > appears in the list of the its supported formats. But since the Debayer does not > support it, the format can not be generated by the entire vimc topology. > This is not a bug. This is also my understanding. You should have an -EPIPE error when start streaming though, it shouldn't fail silently. Regards, Helen > > Hope t was helpful, > Dafna > >> >> If yes, which entity should support it, if not debayer? Should there be >> a separate conversion entity, or should we keep the support in debayer >> itself for efficiency issues? >> >>> >>> >>> On 28.05.20 20:57, Kaaira Gupta wrote: >>>> Running qcam for pixelformat 0x34324142 showed that vimc debayer does >>>> not support it. Hence, add the support for Alpha (255). >>> >>> I would change the commit log to: >>> >>> Add support for V4L2_PIX_FMT_RGB24 format in the debayer >>> and set the alpha channel to constant 255. >>> >>> Thanks, >>> Dafna >>> >>>> >>>> Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> >>>> --- >>>> .../media/test-drivers/vimc/vimc-debayer.c | 27 ++++++++++++------- >>>> 1 file changed, 18 insertions(+), 9 deletions(-) >>>> >>>> diff --git a/drivers/media/test-drivers/vimc/vimc-debayer.c b/drivers/media/test-drivers/vimc/vimc-debayer.c >>>> index c3f6fef34f68..f34148717a40 100644 >>>> --- a/drivers/media/test-drivers/vimc/vimc-debayer.c >>>> +++ b/drivers/media/test-drivers/vimc/vimc-debayer.c >>>> @@ -62,6 +62,7 @@ static const u32 vimc_deb_src_mbus_codes[] = { >>>> MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, >>>> MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, >>>> MEDIA_BUS_FMT_RGB888_1X32_PADHI, >>>> + MEDIA_BUS_FMT_ARGB8888_1X32 >>>> }; >>>> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { >>>> @@ -322,15 +323,23 @@ static void vimc_deb_process_rgb_frame(struct vimc_deb_device *vdeb, >>>> unsigned int i, index; >>>> vpix = vimc_pix_map_by_code(vdeb->src_code); >>>> - index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>>> - for (i = 0; i < 3; i++) { >>>> - switch (vpix->pixelformat) { >>>> - case V4L2_PIX_FMT_RGB24: >>>> - vdeb->src_frame[index + i] = rgb[i]; >>>> - break; >>>> - case V4L2_PIX_FMT_BGR24: >>>> - vdeb->src_frame[index + i] = rgb[2 - i]; >>>> - break; >>>> + >>>> + if (vpix->pixelformat == V4L2_PIX_FMT_ARGB32) { >>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 4); >>>> + vdeb->src_frame[index] = 255; >>>> + for (i = 0; i < 3; i++) >>>> + vdeb->src_frame[index + i + 1] = rgb[i]; >>>> + } else { >>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>>> + for (i = 0; i < 3; i++) { >>>> + switch (vpix->pixelformat) { >>>> + case V4L2_PIX_FMT_RGB24: >>>> + vdeb->src_frame[index + i] = rgb[i]; >>>> + break; >>>> + case V4L2_PIX_FMT_BGR24: >>>> + vdeb->src_frame[index + i] = rgb[2 - i]; >>>> + break; >>>> + } >>>> } >>>> } >>>> } >>>> ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] vimc: debayer: Add support for ARGB format 2020-06-02 10:55 ` Helen Koike @ 2020-06-02 11:24 ` Kieran Bingham 2020-06-02 11:31 ` Helen Koike 0 siblings, 1 reply; 13+ messages in thread From: Kieran Bingham @ 2020-06-02 11:24 UTC (permalink / raw) To: Helen Koike, Dafna Hirschfeld, Kaaira Gupta Cc: Shuah Khan, laurent.pinchart, Mauro Carvalho Chehab, linux-media, linux-kernel, dafna Hirschfeld Hi Helen, Dafna, On 02/06/2020 11:55, Helen Koike wrote: > > On 6/2/20 7:52 AM, Dafna Hirschfeld wrote: >> >> On 01.06.20 14:16, Kaaira Gupta wrote: >>> On Fri, May 29, 2020 at 05:43:57PM +0200, Dafna Hirschfeld wrote: >>>> Hi, >>>> Thanks for the patch >>>> >>>> I don't know how real devices handle ARGB formats, >>>> I wonder if it should be the part of the debayer. >>> >>> Hi! qcam tries to support BA24 as it is one of the formats that vimc >>> lists as its supported formats wih --list-formats. Shouldn't BA24 be >>> possible to capture with vimc? >> >> Hi, >> Just to clarify, when listing the supported formats of a video node, the node lists >> the formats that the video node as an independent media entity support. >> It does not mean that the 'camera' as a whole (that is, the media topology graph) supports >> all the formats that the video node lists. When interacting with a video node or >> a subdevice node, one interacts only with that specific entity. >> In the case of vimc, the RGB video node as an independent entity supports BA24 so the format >> appears in the list of the its supported formats. But since the Debayer does not >> support it, the format can not be generated by the entire vimc topology. >> This is not a bug. > > This is also my understanding. > > You should have an -EPIPE error when start streaming though, it shouldn't fail silently. Yes, we had -EPIPE, and that is what I think we were trying to resolve. How would userspace be expected to detect what formats to use ? Should the available formats on the capture node depend on the current linking of the media graph? Otherwise, to know what formats are supported - userspace must first 'get a list of formats' then try to 'set' the formats to know what is possible? Or should (given VIMC is quite specialist anyway) userspace 'just know' what is capable all the same? That's possibly fine, as we can simply remove support for the ARGB formats from the libcamera pipeline handler if it is never expected to be supported. But then as a further question - what formats will we expect VIMC to support? VIVID has a (very) wide range of formats. Would we ever expect VIMC to be as configurable? Or is the scope limited to what we have today? -- Regards Kieran > Regards, > Helen > >> >> Hope t was helpful, >> Dafna >> >>> >>> If yes, which entity should support it, if not debayer? Should there be >>> a separate conversion entity, or should we keep the support in debayer >>> itself for efficiency issues? >>> >>>> >>>> >>>> On 28.05.20 20:57, Kaaira Gupta wrote: >>>>> Running qcam for pixelformat 0x34324142 showed that vimc debayer does >>>>> not support it. Hence, add the support for Alpha (255). >>>> >>>> I would change the commit log to: >>>> >>>> Add support for V4L2_PIX_FMT_RGB24 format in the debayer >>>> and set the alpha channel to constant 255. >>>> >>>> Thanks, >>>> Dafna >>>> >>>>> >>>>> Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> >>>>> --- >>>>> .../media/test-drivers/vimc/vimc-debayer.c | 27 ++++++++++++------- >>>>> 1 file changed, 18 insertions(+), 9 deletions(-) >>>>> >>>>> diff --git a/drivers/media/test-drivers/vimc/vimc-debayer.c b/drivers/media/test-drivers/vimc/vimc-debayer.c >>>>> index c3f6fef34f68..f34148717a40 100644 >>>>> --- a/drivers/media/test-drivers/vimc/vimc-debayer.c >>>>> +++ b/drivers/media/test-drivers/vimc/vimc-debayer.c >>>>> @@ -62,6 +62,7 @@ static const u32 vimc_deb_src_mbus_codes[] = { >>>>> MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, >>>>> MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, >>>>> MEDIA_BUS_FMT_RGB888_1X32_PADHI, >>>>> + MEDIA_BUS_FMT_ARGB8888_1X32 >>>>> }; >>>>> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { >>>>> @@ -322,15 +323,23 @@ static void vimc_deb_process_rgb_frame(struct vimc_deb_device *vdeb, >>>>> unsigned int i, index; >>>>> vpix = vimc_pix_map_by_code(vdeb->src_code); >>>>> - index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>>>> - for (i = 0; i < 3; i++) { >>>>> - switch (vpix->pixelformat) { >>>>> - case V4L2_PIX_FMT_RGB24: >>>>> - vdeb->src_frame[index + i] = rgb[i]; >>>>> - break; >>>>> - case V4L2_PIX_FMT_BGR24: >>>>> - vdeb->src_frame[index + i] = rgb[2 - i]; >>>>> - break; >>>>> + >>>>> + if (vpix->pixelformat == V4L2_PIX_FMT_ARGB32) { >>>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 4); >>>>> + vdeb->src_frame[index] = 255; >>>>> + for (i = 0; i < 3; i++) >>>>> + vdeb->src_frame[index + i + 1] = rgb[i]; >>>>> + } else { >>>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>>>> + for (i = 0; i < 3; i++) { >>>>> + switch (vpix->pixelformat) { >>>>> + case V4L2_PIX_FMT_RGB24: >>>>> + vdeb->src_frame[index + i] = rgb[i]; >>>>> + break; >>>>> + case V4L2_PIX_FMT_BGR24: >>>>> + vdeb->src_frame[index + i] = rgb[2 - i]; >>>>> + break; >>>>> + } >>>>> } >>>>> } >>>>> } >>>>> -- Regards -- Kieran ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] vimc: debayer: Add support for ARGB format 2020-06-02 11:24 ` Kieran Bingham @ 2020-06-02 11:31 ` Helen Koike 2020-06-02 12:45 ` Laurent Pinchart 0 siblings, 1 reply; 13+ messages in thread From: Helen Koike @ 2020-06-02 11:31 UTC (permalink / raw) To: kieran.bingham, Dafna Hirschfeld, Kaaira Gupta Cc: Shuah Khan, laurent.pinchart, Mauro Carvalho Chehab, linux-media, linux-kernel, dafna Hirschfeld Hello, On 6/2/20 8:24 AM, Kieran Bingham wrote: > Hi Helen, Dafna, > > On 02/06/2020 11:55, Helen Koike wrote: >> >> On 6/2/20 7:52 AM, Dafna Hirschfeld wrote: >>> >>> On 01.06.20 14:16, Kaaira Gupta wrote: >>>> On Fri, May 29, 2020 at 05:43:57PM +0200, Dafna Hirschfeld wrote: >>>>> Hi, >>>>> Thanks for the patch >>>>> >>>>> I don't know how real devices handle ARGB formats, >>>>> I wonder if it should be the part of the debayer. >>>> >>>> Hi! qcam tries to support BA24 as it is one of the formats that vimc >>>> lists as its supported formats wih --list-formats. Shouldn't BA24 be >>>> possible to capture with vimc? >>> >>> Hi, >>> Just to clarify, when listing the supported formats of a video node, the node lists >>> the formats that the video node as an independent media entity support. >>> It does not mean that the 'camera' as a whole (that is, the media topology graph) supports >>> all the formats that the video node lists. When interacting with a video node or >>> a subdevice node, one interacts only with that specific entity. >>> In the case of vimc, the RGB video node as an independent entity supports BA24 so the format >>> appears in the list of the its supported formats. But since the Debayer does not >>> support it, the format can not be generated by the entire vimc topology. >>> This is not a bug. >> >> This is also my understanding. >> >> You should have an -EPIPE error when start streaming though, it shouldn't fail silently. > > Yes, we had -EPIPE, and that is what I think we were trying to resolve. > > How would userspace be expected to detect what formats to use ? Should > the available formats on the capture node depend on the current linking > of the media graph? This is a good question, I don't recall v4l2 API defining this. It would be a bit hard to implement in Vimc, specially when we have configfs for custom topology, since the capture would need to query all the pipeline. But could be implemented. > > Otherwise, to know what formats are supported - userspace must first > 'get a list of formats' then try to 'set' the formats to know what is > possible? At the moment yes. > > Or should (given VIMC is quite specialist anyway) userspace 'just know' > what is capable all the same? > > That's possibly fine, as we can simply remove support for the ARGB > formats from the libcamera pipeline handler if it is never expected to > be supported. With the configfs feature, you could build a topology with sensor->capture, and ARGB would be supported. > > But then as a further question - what formats will we expect VIMC to > support? VIVID has a (very) wide range of formats. > > Would we ever expect VIMC to be as configurable? > Or is the scope limited to what we have today? I know it is very limited atm, but I would like to increase the range, I'm just with a limited bandwitdh to work on it. Thanks, Helen > > -- > Regards > > Kieran > > > >> Regards, >> Helen >> >>> >>> Hope t was helpful, >>> Dafna >>> >>>> >>>> If yes, which entity should support it, if not debayer? Should there be >>>> a separate conversion entity, or should we keep the support in debayer >>>> itself for efficiency issues? >>>> >>>>> >>>>> >>>>> On 28.05.20 20:57, Kaaira Gupta wrote: >>>>>> Running qcam for pixelformat 0x34324142 showed that vimc debayer does >>>>>> not support it. Hence, add the support for Alpha (255). >>>>> >>>>> I would change the commit log to: >>>>> >>>>> Add support for V4L2_PIX_FMT_RGB24 format in the debayer >>>>> and set the alpha channel to constant 255. >>>>> >>>>> Thanks, >>>>> Dafna >>>>> >>>>>> >>>>>> Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> >>>>>> --- >>>>>> .../media/test-drivers/vimc/vimc-debayer.c | 27 ++++++++++++------- >>>>>> 1 file changed, 18 insertions(+), 9 deletions(-) >>>>>> >>>>>> diff --git a/drivers/media/test-drivers/vimc/vimc-debayer.c b/drivers/media/test-drivers/vimc/vimc-debayer.c >>>>>> index c3f6fef34f68..f34148717a40 100644 >>>>>> --- a/drivers/media/test-drivers/vimc/vimc-debayer.c >>>>>> +++ b/drivers/media/test-drivers/vimc/vimc-debayer.c >>>>>> @@ -62,6 +62,7 @@ static const u32 vimc_deb_src_mbus_codes[] = { >>>>>> MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, >>>>>> MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, >>>>>> MEDIA_BUS_FMT_RGB888_1X32_PADHI, >>>>>> + MEDIA_BUS_FMT_ARGB8888_1X32 >>>>>> }; >>>>>> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { >>>>>> @@ -322,15 +323,23 @@ static void vimc_deb_process_rgb_frame(struct vimc_deb_device *vdeb, >>>>>> unsigned int i, index; >>>>>> vpix = vimc_pix_map_by_code(vdeb->src_code); >>>>>> - index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>>>>> - for (i = 0; i < 3; i++) { >>>>>> - switch (vpix->pixelformat) { >>>>>> - case V4L2_PIX_FMT_RGB24: >>>>>> - vdeb->src_frame[index + i] = rgb[i]; >>>>>> - break; >>>>>> - case V4L2_PIX_FMT_BGR24: >>>>>> - vdeb->src_frame[index + i] = rgb[2 - i]; >>>>>> - break; >>>>>> + >>>>>> + if (vpix->pixelformat == V4L2_PIX_FMT_ARGB32) { >>>>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 4); >>>>>> + vdeb->src_frame[index] = 255; >>>>>> + for (i = 0; i < 3; i++) >>>>>> + vdeb->src_frame[index + i + 1] = rgb[i]; >>>>>> + } else { >>>>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>>>>> + for (i = 0; i < 3; i++) { >>>>>> + switch (vpix->pixelformat) { >>>>>> + case V4L2_PIX_FMT_RGB24: >>>>>> + vdeb->src_frame[index + i] = rgb[i]; >>>>>> + break; >>>>>> + case V4L2_PIX_FMT_BGR24: >>>>>> + vdeb->src_frame[index + i] = rgb[2 - i]; >>>>>> + break; >>>>>> + } >>>>>> } >>>>>> } >>>>>> } >>>>>> > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] vimc: debayer: Add support for ARGB format 2020-06-02 11:31 ` Helen Koike @ 2020-06-02 12:45 ` Laurent Pinchart 2020-06-02 13:13 ` Helen Koike 2020-06-02 13:16 ` Dafna Hirschfeld 0 siblings, 2 replies; 13+ messages in thread From: Laurent Pinchart @ 2020-06-02 12:45 UTC (permalink / raw) To: Helen Koike Cc: kieran.bingham, Dafna Hirschfeld, Kaaira Gupta, Shuah Khan, Mauro Carvalho Chehab, linux-media, linux-kernel, dafna Hirschfeld Hello, On Tue, Jun 02, 2020 at 08:31:26AM -0300, Helen Koike wrote: > On 6/2/20 8:24 AM, Kieran Bingham wrote: > > On 02/06/2020 11:55, Helen Koike wrote: > >> On 6/2/20 7:52 AM, Dafna Hirschfeld wrote: > >>> On 01.06.20 14:16, Kaaira Gupta wrote: > >>>> On Fri, May 29, 2020 at 05:43:57PM +0200, Dafna Hirschfeld wrote: > >>>>> Hi, > >>>>> Thanks for the patch > >>>>> > >>>>> I don't know how real devices handle ARGB formats, > >>>>> I wonder if it should be the part of the debayer. > >>>> > >>>> Hi! qcam tries to support BA24 as it is one of the formats that vimc > >>>> lists as its supported formats wih --list-formats. Shouldn't BA24 be > >>>> possible to capture with vimc? > >>> > >>> Hi, > >>> Just to clarify, when listing the supported formats of a video node, the node lists > >>> the formats that the video node as an independent media entity support. > >>> It does not mean that the 'camera' as a whole (that is, the media topology graph) supports > >>> all the formats that the video node lists. When interacting with a video node or > >>> a subdevice node, one interacts only with that specific entity. > >>> In the case of vimc, the RGB video node as an independent entity supports BA24 so the format > >>> appears in the list of the its supported formats. But since the Debayer does not > >>> support it, the format can not be generated by the entire vimc topology. > >>> This is not a bug. Is here a valid configuration for the vimc pipeline that produces BA24 ? I agree that not all pipeline configurations need to support every format, but we shouldn't report a format that can't be produced at all. This being said, and as discussed before, the de-bayering subdev should just produce MEDIA_BUS_FMT_RGB888_1X24, and the video node should then implement the RGB pixel formats. BA24 should likely be one of the supported formats (or maybe BX24 ?). > >> This is also my understanding. > >> > >> You should have an -EPIPE error when start streaming though, it > >> shouldn't fail silently. > > > > Yes, we had -EPIPE, and that is what I think we were trying to resolve. > > > > How would userspace be expected to detect what formats to use ? Should > > the available formats on the capture node depend on the current linking > > of the media graph? > > This is a good question, I don't recall v4l2 API defining this. A recent extension to VIDIOC_ENUMFMT allows enumerating pixel formats for a given media bus code, I think that's the way forward. > It would be a bit hard to implement in Vimc, specially when we have configfs > for custom topology, since the capture would need to query all the pipeline. > But could be implemented. > > > Otherwise, to know what formats are supported - userspace must first > > 'get a list of formats' then try to 'set' the formats to know what is > > possible? > > At the moment yes. > > > Or should (given VIMC is quite specialist anyway) userspace 'just know' > > what is capable all the same? > > > > That's possibly fine, as we can simply remove support for the ARGB > > formats from the libcamera pipeline handler if it is never expected to > > be supported. > > With the configfs feature, you could build a topology with sensor->capture, > and ARGB would be supported. > > > But then as a further question - what formats will we expect VIMC to > > support? VIVID has a (very) wide range of formats. > > > > Would we ever expect VIMC to be as configurable? > > Or is the scope limited to what we have today? > > I know it is very limited atm, but I would like to increase the range, > I'm just with a limited bandwitdh to work on it. > > >>>> > >>>> If yes, which entity should support it, if not debayer? Should there be > >>>> a separate conversion entity, or should we keep the support in debayer > >>>> itself for efficiency issues? > >>>> > >>>>> On 28.05.20 20:57, Kaaira Gupta wrote: > >>>>>> Running qcam for pixelformat 0x34324142 showed that vimc debayer does > >>>>>> not support it. Hence, add the support for Alpha (255). > >>>>> > >>>>> I would change the commit log to: > >>>>> > >>>>> Add support for V4L2_PIX_FMT_RGB24 format in the debayer > >>>>> and set the alpha channel to constant 255. > >>>>> > >>>>>> Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> > >>>>>> --- > >>>>>> .../media/test-drivers/vimc/vimc-debayer.c | 27 ++++++++++++------- > >>>>>> 1 file changed, 18 insertions(+), 9 deletions(-) > >>>>>> > >>>>>> diff --git a/drivers/media/test-drivers/vimc/vimc-debayer.c b/drivers/media/test-drivers/vimc/vimc-debayer.c > >>>>>> index c3f6fef34f68..f34148717a40 100644 > >>>>>> --- a/drivers/media/test-drivers/vimc/vimc-debayer.c > >>>>>> +++ b/drivers/media/test-drivers/vimc/vimc-debayer.c > >>>>>> @@ -62,6 +62,7 @@ static const u32 vimc_deb_src_mbus_codes[] = { > >>>>>> MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > >>>>>> MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, > >>>>>> MEDIA_BUS_FMT_RGB888_1X32_PADHI, > >>>>>> + MEDIA_BUS_FMT_ARGB8888_1X32 > >>>>>> }; > >>>>>> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { > >>>>>> @@ -322,15 +323,23 @@ static void vimc_deb_process_rgb_frame(struct vimc_deb_device *vdeb, > >>>>>> unsigned int i, index; > >>>>>> vpix = vimc_pix_map_by_code(vdeb->src_code); > >>>>>> - index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); > >>>>>> - for (i = 0; i < 3; i++) { > >>>>>> - switch (vpix->pixelformat) { > >>>>>> - case V4L2_PIX_FMT_RGB24: > >>>>>> - vdeb->src_frame[index + i] = rgb[i]; > >>>>>> - break; > >>>>>> - case V4L2_PIX_FMT_BGR24: > >>>>>> - vdeb->src_frame[index + i] = rgb[2 - i]; > >>>>>> - break; > >>>>>> + > >>>>>> + if (vpix->pixelformat == V4L2_PIX_FMT_ARGB32) { > >>>>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 4); > >>>>>> + vdeb->src_frame[index] = 255; > >>>>>> + for (i = 0; i < 3; i++) > >>>>>> + vdeb->src_frame[index + i + 1] = rgb[i]; > >>>>>> + } else { > >>>>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); > >>>>>> + for (i = 0; i < 3; i++) { > >>>>>> + switch (vpix->pixelformat) { > >>>>>> + case V4L2_PIX_FMT_RGB24: > >>>>>> + vdeb->src_frame[index + i] = rgb[i]; > >>>>>> + break; > >>>>>> + case V4L2_PIX_FMT_BGR24: > >>>>>> + vdeb->src_frame[index + i] = rgb[2 - i]; > >>>>>> + break; > >>>>>> + } > >>>>>> } > >>>>>> } > >>>>>> } -- Regards, Laurent Pinchart ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] vimc: debayer: Add support for ARGB format 2020-06-02 12:45 ` Laurent Pinchart @ 2020-06-02 13:13 ` Helen Koike 2020-06-02 13:16 ` Dafna Hirschfeld 1 sibling, 0 replies; 13+ messages in thread From: Helen Koike @ 2020-06-02 13:13 UTC (permalink / raw) To: Laurent Pinchart Cc: kieran.bingham, Dafna Hirschfeld, Kaaira Gupta, Shuah Khan, Mauro Carvalho Chehab, linux-media, linux-kernel, dafna Hirschfeld On 6/2/20 9:45 AM, Laurent Pinchart wrote: > Hello, > > On Tue, Jun 02, 2020 at 08:31:26AM -0300, Helen Koike wrote: >> On 6/2/20 8:24 AM, Kieran Bingham wrote: >>> On 02/06/2020 11:55, Helen Koike wrote: >>>> On 6/2/20 7:52 AM, Dafna Hirschfeld wrote: >>>>> On 01.06.20 14:16, Kaaira Gupta wrote: >>>>>> On Fri, May 29, 2020 at 05:43:57PM +0200, Dafna Hirschfeld wrote: >>>>>>> Hi, >>>>>>> Thanks for the patch >>>>>>> >>>>>>> I don't know how real devices handle ARGB formats, >>>>>>> I wonder if it should be the part of the debayer. >>>>>> >>>>>> Hi! qcam tries to support BA24 as it is one of the formats that vimc >>>>>> lists as its supported formats wih --list-formats. Shouldn't BA24 be >>>>>> possible to capture with vimc? >>>>> >>>>> Hi, >>>>> Just to clarify, when listing the supported formats of a video node, the node lists >>>>> the formats that the video node as an independent media entity support. >>>>> It does not mean that the 'camera' as a whole (that is, the media topology graph) supports >>>>> all the formats that the video node lists. When interacting with a video node or >>>>> a subdevice node, one interacts only with that specific entity. >>>>> In the case of vimc, the RGB video node as an independent entity supports BA24 so the format >>>>> appears in the list of the its supported formats. But since the Debayer does not >>>>> support it, the format can not be generated by the entire vimc topology. >>>>> This is not a bug. > > Is here a valid configuration for the vimc pipeline that produces BA24 ? It should work when using the other capture nodes that doesn't contain the debayer in the pipeline. > I agree that not all pipeline configurations need to support every > format, but we shouldn't report a format that can't be produced at all. ok, this requires major changes in Vimc, unless we implement all the conversions in the capture. > > This being said, and as discussed before, the de-bayering subdev should > just produce MEDIA_BUS_FMT_RGB888_1X24, and the video node should then > implement the RGB pixel formats. BA24 should likely be one of the > supported formats (or maybe BX24 ?). We can implement the conversion in the capture node, we just need to distinguish when the pipeline generates it and when it requires conversion, but shouldn't be a problem. > >>>> This is also my understanding. >>>> >>>> You should have an -EPIPE error when start streaming though, it >>>> shouldn't fail silently. >>> >>> Yes, we had -EPIPE, and that is what I think we were trying to resolve. >>> >>> How would userspace be expected to detect what formats to use ? Should >>> the available formats on the capture node depend on the current linking >>> of the media graph? >> >> This is a good question, I don't recall v4l2 API defining this. > > A recent extension to VIDIOC_ENUMFMT allows enumerating pixel formats > for a given media bus code, I think that's the way forward. Nice, I'm not familiar with this extension, I'll take a look, thanks for the pointer. Thanks Helen > >> It would be a bit hard to implement in Vimc, specially when we have configfs >> for custom topology, since the capture would need to query all the pipeline. >> But could be implemented. >> >>> Otherwise, to know what formats are supported - userspace must first >>> 'get a list of formats' then try to 'set' the formats to know what is >>> possible? >> >> At the moment yes. >> >>> Or should (given VIMC is quite specialist anyway) userspace 'just know' >>> what is capable all the same? >>> >>> That's possibly fine, as we can simply remove support for the ARGB >>> formats from the libcamera pipeline handler if it is never expected to >>> be supported. >> >> With the configfs feature, you could build a topology with sensor->capture, >> and ARGB would be supported. >> >>> But then as a further question - what formats will we expect VIMC to >>> support? VIVID has a (very) wide range of formats. >>> >>> Would we ever expect VIMC to be as configurable? >>> Or is the scope limited to what we have today? >> >> I know it is very limited atm, but I would like to increase the range, >> I'm just with a limited bandwitdh to work on it. >> >>>>>> >>>>>> If yes, which entity should support it, if not debayer? Should there be >>>>>> a separate conversion entity, or should we keep the support in debayer >>>>>> itself for efficiency issues? >>>>>> >>>>>>> On 28.05.20 20:57, Kaaira Gupta wrote: >>>>>>>> Running qcam for pixelformat 0x34324142 showed that vimc debayer does >>>>>>>> not support it. Hence, add the support for Alpha (255). >>>>>>> >>>>>>> I would change the commit log to: >>>>>>> >>>>>>> Add support for V4L2_PIX_FMT_RGB24 format in the debayer >>>>>>> and set the alpha channel to constant 255. >>>>>>> >>>>>>>> Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> >>>>>>>> --- >>>>>>>> .../media/test-drivers/vimc/vimc-debayer.c | 27 ++++++++++++------- >>>>>>>> 1 file changed, 18 insertions(+), 9 deletions(-) >>>>>>>> >>>>>>>> diff --git a/drivers/media/test-drivers/vimc/vimc-debayer.c b/drivers/media/test-drivers/vimc/vimc-debayer.c >>>>>>>> index c3f6fef34f68..f34148717a40 100644 >>>>>>>> --- a/drivers/media/test-drivers/vimc/vimc-debayer.c >>>>>>>> +++ b/drivers/media/test-drivers/vimc/vimc-debayer.c >>>>>>>> @@ -62,6 +62,7 @@ static const u32 vimc_deb_src_mbus_codes[] = { >>>>>>>> MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, >>>>>>>> MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, >>>>>>>> MEDIA_BUS_FMT_RGB888_1X32_PADHI, >>>>>>>> + MEDIA_BUS_FMT_ARGB8888_1X32 >>>>>>>> }; >>>>>>>> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { >>>>>>>> @@ -322,15 +323,23 @@ static void vimc_deb_process_rgb_frame(struct vimc_deb_device *vdeb, >>>>>>>> unsigned int i, index; >>>>>>>> vpix = vimc_pix_map_by_code(vdeb->src_code); >>>>>>>> - index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>>>>>>> - for (i = 0; i < 3; i++) { >>>>>>>> - switch (vpix->pixelformat) { >>>>>>>> - case V4L2_PIX_FMT_RGB24: >>>>>>>> - vdeb->src_frame[index + i] = rgb[i]; >>>>>>>> - break; >>>>>>>> - case V4L2_PIX_FMT_BGR24: >>>>>>>> - vdeb->src_frame[index + i] = rgb[2 - i]; >>>>>>>> - break; >>>>>>>> + >>>>>>>> + if (vpix->pixelformat == V4L2_PIX_FMT_ARGB32) { >>>>>>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 4); >>>>>>>> + vdeb->src_frame[index] = 255; >>>>>>>> + for (i = 0; i < 3; i++) >>>>>>>> + vdeb->src_frame[index + i + 1] = rgb[i]; >>>>>>>> + } else { >>>>>>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>>>>>>> + for (i = 0; i < 3; i++) { >>>>>>>> + switch (vpix->pixelformat) { >>>>>>>> + case V4L2_PIX_FMT_RGB24: >>>>>>>> + vdeb->src_frame[index + i] = rgb[i]; >>>>>>>> + break; >>>>>>>> + case V4L2_PIX_FMT_BGR24: >>>>>>>> + vdeb->src_frame[index + i] = rgb[2 - i]; >>>>>>>> + break; >>>>>>>> + } >>>>>>>> } >>>>>>>> } >>>>>>>> } > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] vimc: debayer: Add support for ARGB format 2020-06-02 12:45 ` Laurent Pinchart 2020-06-02 13:13 ` Helen Koike @ 2020-06-02 13:16 ` Dafna Hirschfeld 2020-06-02 15:14 ` Laurent Pinchart 1 sibling, 1 reply; 13+ messages in thread From: Dafna Hirschfeld @ 2020-06-02 13:16 UTC (permalink / raw) To: Laurent Pinchart, Helen Koike Cc: kieran.bingham, Kaaira Gupta, Shuah Khan, Mauro Carvalho Chehab, linux-media, linux-kernel, dafna Hirschfeld On 02.06.20 14:45, Laurent Pinchart wrote: > Hello, > > On Tue, Jun 02, 2020 at 08:31:26AM -0300, Helen Koike wrote: >> On 6/2/20 8:24 AM, Kieran Bingham wrote: >>> On 02/06/2020 11:55, Helen Koike wrote: >>>> On 6/2/20 7:52 AM, Dafna Hirschfeld wrote: >>>>> On 01.06.20 14:16, Kaaira Gupta wrote: >>>>>> On Fri, May 29, 2020 at 05:43:57PM +0200, Dafna Hirschfeld wrote: >>>>>>> Hi, >>>>>>> Thanks for the patch >>>>>>> >>>>>>> I don't know how real devices handle ARGB formats, >>>>>>> I wonder if it should be the part of the debayer. >>>>>> >>>>>> Hi! qcam tries to support BA24 as it is one of the formats that vimc >>>>>> lists as its supported formats wih --list-formats. Shouldn't BA24 be >>>>>> possible to capture with vimc? >>>>> >>>>> Hi, >>>>> Just to clarify, when listing the supported formats of a video node, the node lists >>>>> the formats that the video node as an independent media entity support. >>>>> It does not mean that the 'camera' as a whole (that is, the media topology graph) supports >>>>> all the formats that the video node lists. When interacting with a video node or >>>>> a subdevice node, one interacts only with that specific entity. >>>>> In the case of vimc, the RGB video node as an independent entity supports BA24 so the format >>>>> appears in the list of the its supported formats. But since the Debayer does not >>>>> support it, the format can not be generated by the entire vimc topology. >>>>> This is not a bug. > > Is here a valid configuration for the vimc pipeline that produces BA24 ? I think there isn't > I agree that not all pipeline configurations need to support every > format, but we shouldn't report a format that can't be produced at all. > > This being said, and as discussed before, the de-bayering subdev should > just produce MEDIA_BUS_FMT_RGB888_1X24, and the video node should then > implement the RGB pixel formats. BA24 should likely be one of the > supported formats (or maybe BX24 ?). So you mean that the video node should support it so when it receive RGB format in the source pad it converts it to BA24 or BX24 ? It makes sense. I guess both BA24 and BX24 can be added, I see in the pixfmt-rgb.html doc that probably the control V4L2_CID_ALPHA_COMPONENT should then be added. > >>>> This is also my understanding. >>>> >>>> You should have an -EPIPE error when start streaming though, it >>>> shouldn't fail silently. >>> >>> Yes, we had -EPIPE, and that is what I think we were trying to resolve. >>> >>> How would userspace be expected to detect what formats to use ? Should >>> the available formats on the capture node depend on the current linking >>> of the media graph? >> >> This is a good question, I don't recall v4l2 API defining this. > > A recent extension to VIDIOC_ENUMFMT allows enumerating pixel formats > for a given media bus code, I think that's the way forward. > >> It would be a bit hard to implement in Vimc, specially when we have configfs >> for custom topology, since the capture would need to query all the pipeline. >> But could be implemented. >> >>> Otherwise, to know what formats are supported - userspace must first >>> 'get a list of formats' then try to 'set' the formats to know what is >>> possible? Yes, there is a doc file that explains that it should be done in a "bottom-up" way ,that is, starting with configuring the sensor, then adjusting the debayer to the sensor output, then adjusting the scaler to the debayer outout and then adjusting the video node output to the scaler output. One should also use the 'try' version of the setting at the stage of adjusting the final configuration. The detailed explanation is in Documentation/output/userspace-api/media/v4l/dev-subdev.html Thanks, Dafna >> >> At the moment yes. >> >>> Or should (given VIMC is quite specialist anyway) userspace 'just know' >>> what is capable all the same? >>> >>> That's possibly fine, as we can simply remove support for the ARGB >>> formats from the libcamera pipeline handler if it is never expected to >>> be supported. >> >> With the configfs feature, you could build a topology with sensor->capture, >> and ARGB would be supported. >> >>> But then as a further question - what formats will we expect VIMC to >>> support? VIVID has a (very) wide range of formats. >>> >>> Would we ever expect VIMC to be as configurable? >>> Or is the scope limited to what we have today? >> >> I know it is very limited atm, but I would like to increase the range, >> I'm just with a limited bandwitdh to work on it. >> >>>>>> >>>>>> If yes, which entity should support it, if not debayer? Should there be >>>>>> a separate conversion entity, or should we keep the support in debayer >>>>>> itself for efficiency issues? >>>>>> >>>>>>> On 28.05.20 20:57, Kaaira Gupta wrote: >>>>>>>> Running qcam for pixelformat 0x34324142 showed that vimc debayer does >>>>>>>> not support it. Hence, add the support for Alpha (255). >>>>>>> >>>>>>> I would change the commit log to: >>>>>>> >>>>>>> Add support for V4L2_PIX_FMT_RGB24 format in the debayer >>>>>>> and set the alpha channel to constant 255. >>>>>>> >>>>>>>> Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> >>>>>>>> --- >>>>>>>> .../media/test-drivers/vimc/vimc-debayer.c | 27 ++++++++++++------- >>>>>>>> 1 file changed, 18 insertions(+), 9 deletions(-) >>>>>>>> >>>>>>>> diff --git a/drivers/media/test-drivers/vimc/vimc-debayer.c b/drivers/media/test-drivers/vimc/vimc-debayer.c >>>>>>>> index c3f6fef34f68..f34148717a40 100644 >>>>>>>> --- a/drivers/media/test-drivers/vimc/vimc-debayer.c >>>>>>>> +++ b/drivers/media/test-drivers/vimc/vimc-debayer.c >>>>>>>> @@ -62,6 +62,7 @@ static const u32 vimc_deb_src_mbus_codes[] = { >>>>>>>> MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, >>>>>>>> MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, >>>>>>>> MEDIA_BUS_FMT_RGB888_1X32_PADHI, >>>>>>>> + MEDIA_BUS_FMT_ARGB8888_1X32 >>>>>>>> }; >>>>>>>> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { >>>>>>>> @@ -322,15 +323,23 @@ static void vimc_deb_process_rgb_frame(struct vimc_deb_device *vdeb, >>>>>>>> unsigned int i, index; >>>>>>>> vpix = vimc_pix_map_by_code(vdeb->src_code); >>>>>>>> - index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>>>>>>> - for (i = 0; i < 3; i++) { >>>>>>>> - switch (vpix->pixelformat) { >>>>>>>> - case V4L2_PIX_FMT_RGB24: >>>>>>>> - vdeb->src_frame[index + i] = rgb[i]; >>>>>>>> - break; >>>>>>>> - case V4L2_PIX_FMT_BGR24: >>>>>>>> - vdeb->src_frame[index + i] = rgb[2 - i]; >>>>>>>> - break; >>>>>>>> + >>>>>>>> + if (vpix->pixelformat == V4L2_PIX_FMT_ARGB32) { >>>>>>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 4); >>>>>>>> + vdeb->src_frame[index] = 255; >>>>>>>> + for (i = 0; i < 3; i++) >>>>>>>> + vdeb->src_frame[index + i + 1] = rgb[i]; >>>>>>>> + } else { >>>>>>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); >>>>>>>> + for (i = 0; i < 3; i++) { >>>>>>>> + switch (vpix->pixelformat) { >>>>>>>> + case V4L2_PIX_FMT_RGB24: >>>>>>>> + vdeb->src_frame[index + i] = rgb[i]; >>>>>>>> + break; >>>>>>>> + case V4L2_PIX_FMT_BGR24: >>>>>>>> + vdeb->src_frame[index + i] = rgb[2 - i]; >>>>>>>> + break; >>>>>>>> + } >>>>>>>> } >>>>>>>> } >>>>>>>> } > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] vimc: debayer: Add support for ARGB format 2020-06-02 13:16 ` Dafna Hirschfeld @ 2020-06-02 15:14 ` Laurent Pinchart 0 siblings, 0 replies; 13+ messages in thread From: Laurent Pinchart @ 2020-06-02 15:14 UTC (permalink / raw) To: Dafna Hirschfeld Cc: Helen Koike, kieran.bingham, Kaaira Gupta, Shuah Khan, Mauro Carvalho Chehab, linux-media, linux-kernel, dafna Hirschfeld Hi Dafna, On Tue, Jun 02, 2020 at 03:16:03PM +0200, Dafna Hirschfeld wrote: > On 02.06.20 14:45, Laurent Pinchart wrote: > > On Tue, Jun 02, 2020 at 08:31:26AM -0300, Helen Koike wrote: > >> On 6/2/20 8:24 AM, Kieran Bingham wrote: > >>> On 02/06/2020 11:55, Helen Koike wrote: > >>>> On 6/2/20 7:52 AM, Dafna Hirschfeld wrote: > >>>>> On 01.06.20 14:16, Kaaira Gupta wrote: > >>>>>> On Fri, May 29, 2020 at 05:43:57PM +0200, Dafna Hirschfeld wrote: > >>>>>>> Hi, > >>>>>>> Thanks for the patch > >>>>>>> > >>>>>>> I don't know how real devices handle ARGB formats, > >>>>>>> I wonder if it should be the part of the debayer. > >>>>>> > >>>>>> Hi! qcam tries to support BA24 as it is one of the formats that vimc > >>>>>> lists as its supported formats wih --list-formats. Shouldn't BA24 be > >>>>>> possible to capture with vimc? > >>>>> > >>>>> Hi, > >>>>> Just to clarify, when listing the supported formats of a video node, the node lists > >>>>> the formats that the video node as an independent media entity support. > >>>>> It does not mean that the 'camera' as a whole (that is, the media topology graph) supports > >>>>> all the formats that the video node lists. When interacting with a video node or > >>>>> a subdevice node, one interacts only with that specific entity. > >>>>> In the case of vimc, the RGB video node as an independent entity supports BA24 so the format > >>>>> appears in the list of the its supported formats. But since the Debayer does not > >>>>> support it, the format can not be generated by the entire vimc topology. > >>>>> This is not a bug. > > > > Is here a valid configuration for the vimc pipeline that produces BA24 ? > > I think there isn't > > > I agree that not all pipeline configurations need to support every > > format, but we shouldn't report a format that can't be produced at all. > > > > This being said, and as discussed before, the de-bayering subdev should > > just produce MEDIA_BUS_FMT_RGB888_1X24, and the video node should then > > implement the RGB pixel formats. BA24 should likely be one of the > > supported formats (or maybe BX24 ?). > > So you mean that the video node should support it so when it receive RGB > format in the source pad it converts it to BA24 or BX24 ? Yes. If you think about an equivalent hardware pipeline, the device would carry 24-bit RGB between the processing blocks, and only when the data reaches the output formatter (usually bundled with the DMA engine) would it be converted to one of the multiple RGB pixel formats. I think vimc should mimic that behaviour when it comes to pipeline configuration. When it comes to generating data (or processing it, I believe vimc supports, or aims to support, memory-to-memory processing), we have two options: - In the general case, data generated by the TPG would be processed by the individual blocks in the pipeline until it reaches the capture video node. To support processing steps that may generate more, less or an equal amount of data as they consume, we would need to allocate buffers between all the processing blocks. Those buffers don't need to be full frame buffers though, they can be a few lines only, generating the test pattern and processing it a few lines at a time. This architecture would also support memory-to-memory processing. - When using the TPG, we could optimize the implementation by generating data in the capture buffer directly, in the format configured on the video node, without processing the data in every block. The drawback is that processing artifacts (such as the artifacts due to colour interpolation or scaling) wouldn't be generated, the captured image would be cleaner than in a real hardware implementation. Whether that is an issue or not is for us to decide. If vimc doesn't need to support memory-to-memory processing, we could implement the optimized behaviour only. > It makes sense. I guess both BA24 and BX24 can be added, I see in the > pixfmt-rgb.html doc that probably the control V4L2_CID_ALPHA_COMPONENT > should then be added. Yes, V4L2_CID_ALPHA_COMPONENT would need to be added (on the video node) to produce BA24, otherwise the alpha component would have a fixed value. > >>>> This is also my understanding. > >>>> > >>>> You should have an -EPIPE error when start streaming though, it > >>>> shouldn't fail silently. > >>> > >>> Yes, we had -EPIPE, and that is what I think we were trying to resolve. > >>> > >>> How would userspace be expected to detect what formats to use ? Should > >>> the available formats on the capture node depend on the current linking > >>> of the media graph? > >> > >> This is a good question, I don't recall v4l2 API defining this. > > > > A recent extension to VIDIOC_ENUMFMT allows enumerating pixel formats > > for a given media bus code, I think that's the way forward. > > > >> It would be a bit hard to implement in Vimc, specially when we have configfs > >> for custom topology, since the capture would need to query all the pipeline. > >> But could be implemented. > >> > >>> Otherwise, to know what formats are supported - userspace must first > >>> 'get a list of formats' then try to 'set' the formats to know what is > >>> possible? > > Yes, there is a doc file that explains that it should be done in a "bottom-up" way > ,that is, starting with configuring the sensor, then adjusting the debayer > to the sensor output, then adjusting the scaler to the debayer outout and then > adjusting the video node output to the scaler output. One should also use the > 'try' version of the setting at the stage of adjusting the final configuration. > The detailed explanation is in Documentation/output/userspace-api/media/v4l/dev-subdev.html That won't help though. The video node will happily accept a VIDIOC_S_FMT call that sets a pixel format not compatible with the media bus format at the input of the video node. The error will only be raised at stream on time. The VIDIOC_ENUMFMT extension that allows enumerating pixel formats supported for a given media bus code is the only working option. > >> At the moment yes. > >> > >>> Or should (given VIMC is quite specialist anyway) userspace 'just know' > >>> what is capable all the same? > >>> > >>> That's possibly fine, as we can simply remove support for the ARGB > >>> formats from the libcamera pipeline handler if it is never expected to > >>> be supported. > >> > >> With the configfs feature, you could build a topology with sensor->capture, > >> and ARGB would be supported. > >> > >>> But then as a further question - what formats will we expect VIMC to > >>> support? VIVID has a (very) wide range of formats. > >>> > >>> Would we ever expect VIMC to be as configurable? > >>> Or is the scope limited to what we have today? > >> > >> I know it is very limited atm, but I would like to increase the range, > >> I'm just with a limited bandwitdh to work on it. > >> > >>>>>> > >>>>>> If yes, which entity should support it, if not debayer? Should there be > >>>>>> a separate conversion entity, or should we keep the support in debayer > >>>>>> itself for efficiency issues? > >>>>>> > >>>>>>> On 28.05.20 20:57, Kaaira Gupta wrote: > >>>>>>>> Running qcam for pixelformat 0x34324142 showed that vimc debayer does > >>>>>>>> not support it. Hence, add the support for Alpha (255). > >>>>>>> > >>>>>>> I would change the commit log to: > >>>>>>> > >>>>>>> Add support for V4L2_PIX_FMT_RGB24 format in the debayer > >>>>>>> and set the alpha channel to constant 255. > >>>>>>> > >>>>>>>> Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> > >>>>>>>> --- > >>>>>>>> .../media/test-drivers/vimc/vimc-debayer.c | 27 ++++++++++++------- > >>>>>>>> 1 file changed, 18 insertions(+), 9 deletions(-) > >>>>>>>> > >>>>>>>> diff --git a/drivers/media/test-drivers/vimc/vimc-debayer.c b/drivers/media/test-drivers/vimc/vimc-debayer.c > >>>>>>>> index c3f6fef34f68..f34148717a40 100644 > >>>>>>>> --- a/drivers/media/test-drivers/vimc/vimc-debayer.c > >>>>>>>> +++ b/drivers/media/test-drivers/vimc/vimc-debayer.c > >>>>>>>> @@ -62,6 +62,7 @@ static const u32 vimc_deb_src_mbus_codes[] = { > >>>>>>>> MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > >>>>>>>> MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, > >>>>>>>> MEDIA_BUS_FMT_RGB888_1X32_PADHI, > >>>>>>>> + MEDIA_BUS_FMT_ARGB8888_1X32 > >>>>>>>> }; > >>>>>>>> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = { > >>>>>>>> @@ -322,15 +323,23 @@ static void vimc_deb_process_rgb_frame(struct vimc_deb_device *vdeb, > >>>>>>>> unsigned int i, index; > >>>>>>>> vpix = vimc_pix_map_by_code(vdeb->src_code); > >>>>>>>> - index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); > >>>>>>>> - for (i = 0; i < 3; i++) { > >>>>>>>> - switch (vpix->pixelformat) { > >>>>>>>> - case V4L2_PIX_FMT_RGB24: > >>>>>>>> - vdeb->src_frame[index + i] = rgb[i]; > >>>>>>>> - break; > >>>>>>>> - case V4L2_PIX_FMT_BGR24: > >>>>>>>> - vdeb->src_frame[index + i] = rgb[2 - i]; > >>>>>>>> - break; > >>>>>>>> + > >>>>>>>> + if (vpix->pixelformat == V4L2_PIX_FMT_ARGB32) { > >>>>>>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 4); > >>>>>>>> + vdeb->src_frame[index] = 255; > >>>>>>>> + for (i = 0; i < 3; i++) > >>>>>>>> + vdeb->src_frame[index + i + 1] = rgb[i]; > >>>>>>>> + } else { > >>>>>>>> + index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3); > >>>>>>>> + for (i = 0; i < 3; i++) { > >>>>>>>> + switch (vpix->pixelformat) { > >>>>>>>> + case V4L2_PIX_FMT_RGB24: > >>>>>>>> + vdeb->src_frame[index + i] = rgb[i]; > >>>>>>>> + break; > >>>>>>>> + case V4L2_PIX_FMT_BGR24: > >>>>>>>> + vdeb->src_frame[index + i] = rgb[2 - i]; > >>>>>>>> + break; > >>>>>>>> + } > >>>>>>>> } > >>>>>>>> } > >>>>>>>> } -- Regards, Laurent Pinchart ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2020-06-02 15:14 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-05-28 18:57 [PATCH] vimc: debayer: Add support for ARGB format Kaaira Gupta 2020-05-29 15:43 ` Dafna Hirschfeld 2020-06-01 12:16 ` Kaaira Gupta 2020-06-01 12:37 ` Laurent Pinchart 2020-06-01 16:27 ` Helen Koike 2020-06-02 10:52 ` Dafna Hirschfeld 2020-06-02 10:55 ` Helen Koike 2020-06-02 11:24 ` Kieran Bingham 2020-06-02 11:31 ` Helen Koike 2020-06-02 12:45 ` Laurent Pinchart 2020-06-02 13:13 ` Helen Koike 2020-06-02 13:16 ` Dafna Hirschfeld 2020-06-02 15:14 ` Laurent Pinchart
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).