[PATCH AUTOSEL 4.14 006/127] media: smiapp: Fix error handling at NVM reading

[PATCH AUTOSEL 4.14 006/127] media: smiapp: Fix error handling at NVM reading

[Sasha Levin]

From: Sakari Ailus <sakari.ailus@linux.intel.com>

[ Upstream commit a5b1d5413534607b05fb34470ff62bf395f5c8d0 ]

If NVM reading failed, the device was left powered on. Fix that.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/smiapp/smiapp-core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c
index e4d7f2febf00c..05b3974bd9202 100644
--- a/drivers/media/i2c/smiapp/smiapp-core.c
+++ b/drivers/media/i2c/smiapp/smiapp-core.c
@@ -2338,11 +2338,12 @@ smiapp_sysfs_nvm_read(struct device *dev, struct device_attribute *attr,
 		if (rval < 0) {
 			if (rval != -EBUSY && rval != -EAGAIN)
 				pm_runtime_set_active(&client->dev);
-			pm_runtime_put(&client->dev);
+			pm_runtime_put_noidle(&client->dev);
 			return -ENODEV;
 		}
 
 		if (smiapp_read_nvm(sensor, sensor->nvm)) {
+			pm_runtime_put(&client->dev);
 			dev_err(&client->dev, "nvm read failed\n");
 			return -ENODEV;
 		}
-- 
2.25.1

[PATCH AUTOSEL 4.14 027/127] media: ti-vpe: cal: Restrict DMA to avoid memory corruption

[Sasha Levin]

From: Nikhil Devshatwar <nikhil.nd@ti.com>

[ Upstream commit 6e72eab2e7b7a157d554b8f9faed7676047be7c1 ]

When setting DMA for video capture from CSI channel, if the DMA size
is not given, it ends up writing as much data as sent by the camera.

This may lead to overwriting the buffers causing memory corruption.
Observed green lines on the default framebuffer.

Restrict the DMA to maximum height as specified in the S_FMT ioctl.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/ti-vpe/cal.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index b6dcae1ecc1be..ad344e642ddb7 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -687,12 +687,13 @@ static void pix_proc_config(struct cal_ctx *ctx)
 }
 
 static void cal_wr_dma_config(struct cal_ctx *ctx,
-			      unsigned int width)
+			      unsigned int width, unsigned int height)
 {
 	u32 val;
 
 	val = reg_read(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port));
 	set_field(&val, ctx->csi2_port, CAL_WR_DMA_CTRL_CPORT_MASK);
+	set_field(&val, height, CAL_WR_DMA_CTRL_YSIZE_MASK);
 	set_field(&val, CAL_WR_DMA_CTRL_DTAG_PIX_DAT,
 		  CAL_WR_DMA_CTRL_DTAG_MASK);
 	set_field(&val, CAL_WR_DMA_CTRL_MODE_CONST,
@@ -1318,7 +1319,8 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
 	csi2_lane_config(ctx);
 	csi2_ctx_config(ctx);
 	pix_proc_config(ctx);
-	cal_wr_dma_config(ctx, ctx->v_fmt.fmt.pix.bytesperline);
+	cal_wr_dma_config(ctx, ctx->v_fmt.fmt.pix.bytesperline,
+			  ctx->v_fmt.fmt.pix.height);
 	cal_wr_dma_addr(ctx, addr);
 	csi2_ppi_enable(ctx);
 
-- 
2.25.1

[PATCH AUTOSEL 4.14 051/127] media: staging/imx: Missing assignment in imx_media_capture_device_register()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit ef0ed05dcef8a74178a8b480cce23a377b1de2b8 ]

There was supposed to be a "ret = " assignment here, otherwise the
error handling on the next line won't work.

Fixes: 64b5a49df486 ("[media] media: imx: Add Capture Device Interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx-media-capture.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/media/imx/imx-media-capture.c b/drivers/staging/media/imx/imx-media-capture.c
index ea145bafb880a..8ff8843df5141 100644
--- a/drivers/staging/media/imx/imx-media-capture.c
+++ b/drivers/staging/media/imx/imx-media-capture.c
@@ -685,7 +685,7 @@ int imx_media_capture_device_register(struct imx_media_video_dev *vdev)
 	/* setup default format */
 	fmt_src.pad = priv->src_sd_pad;
 	fmt_src.which = V4L2_SUBDEV_FORMAT_ACTIVE;
-	v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt_src);
+	ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt_src);
 	if (ret) {
 		v4l2_err(sd, "failed to get src_sd format\n");
 		goto unreg;
-- 
2.25.1

[PATCH AUTOSEL 4.14 055/127] media: go7007: Fix URB type for interrupt handling

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit a3ea410cac41b19a5490aad7fe6d9a9a772e646e ]

Josef reported that his old-and-good Plextor ConvertX M402U video
converter spews lots of WARNINGs on the recent kernels, and it turned
out that the device uses a bulk endpoint for interrupt handling just
like 2250 board.

For fixing it, generalize the check with the proper verification of
the endpoint instead of hard-coded board type check.

Fixes: 7e5219d18e93 ("[media] go7007: Fix 2250 urb type")
Reported-and-tested-by: Josef Möllers <josef.moellers@suse.com>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1162583
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206427

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/go7007/go7007-usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/go7007/go7007-usb.c b/drivers/media/usb/go7007/go7007-usb.c
index ed9bcaf08d5ec..ddfaabd4c0813 100644
--- a/drivers/media/usb/go7007/go7007-usb.c
+++ b/drivers/media/usb/go7007/go7007-usb.c
@@ -1052,6 +1052,7 @@ static int go7007_usb_probe(struct usb_interface *intf,
 	struct go7007_usb *usb;
 	const struct go7007_usb_board *board;
 	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct usb_host_endpoint *ep;
 	unsigned num_i2c_devs;
 	char *name;
 	int video_pipe, i, v_urb_len;
@@ -1147,7 +1148,8 @@ static int go7007_usb_probe(struct usb_interface *intf,
 	if (usb->intr_urb->transfer_buffer == NULL)
 		goto allocfail;
 
-	if (go->board_id == GO7007_BOARDID_SENSORAY_2250)
+	ep = usb->usbdev->ep_in[4];
+	if (usb_endpoint_type(&ep->desc) == USB_ENDPOINT_XFER_BULK)
 		usb_fill_bulk_urb(usb->intr_urb, usb->usbdev,
 			usb_rcvbulkpipe(usb->usbdev, 4),
 			usb->intr_urb->transfer_buffer, 2*sizeof(u16),
-- 
2.25.1

[PATCH AUTOSEL 4.14 064/127] media: tda10071: fix unsigned sign extension overflow

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit a7463e2dc698075132de9905b89f495df888bb79 ]

The shifting of buf[3] by 24 bits to the left will be promoted to
a 32 bit signed int and then sign-extended to an unsigned long. In
the unlikely event that the the top bit of buf[3] is set then all
then all the upper bits end up as also being set because of
the sign-extension and this affect the ev->post_bit_error sum.
Fix this by using the temporary u32 variable bit_error to avoid
the sign-extension promotion. This also removes the need to do the
computation twice.

Addresses-Coverity: ("Unintended sign extension")

Fixes: 267897a4708f ("[media] tda10071: implement DVBv5 statistics")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-frontends/tda10071.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/media/dvb-frontends/tda10071.c b/drivers/media/dvb-frontends/tda10071.c
index a59f4fd09df60..27466b0d0be86 100644
--- a/drivers/media/dvb-frontends/tda10071.c
+++ b/drivers/media/dvb-frontends/tda10071.c
@@ -483,10 +483,11 @@ static int tda10071_read_status(struct dvb_frontend *fe, enum fe_status *status)
 			goto error;
 
 		if (dev->delivery_system == SYS_DVBS) {
-			dev->dvbv3_ber = buf[0] << 24 | buf[1] << 16 |
-					 buf[2] << 8 | buf[3] << 0;
-			dev->post_bit_error += buf[0] << 24 | buf[1] << 16 |
-					       buf[2] << 8 | buf[3] << 0;
+			u32 bit_error = buf[0] << 24 | buf[1] << 16 |
+					buf[2] << 8 | buf[3] << 0;
+
+			dev->dvbv3_ber = bit_error;
+			dev->post_bit_error += bit_error;
 			c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
 			c->post_bit_error.stat[0].uvalue = dev->post_bit_error;
 			dev->block_error += buf[4] << 8 | buf[5] << 0;
-- 
2.25.1