From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: "Geert Uytterhoeven" <geert+renesas@glider.be>,
"Magnus Damm" <magnus.damm@gmail.com>,
"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
"Kieran Bingham" <kieran.bingham@ideasonboard.com>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Rob Herring" <robh+dt@kernel.org>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Rob Herring <robh@kernel.org>
Subject: [PATCH v6 1/8] dt-bindings: media: max9286: Re-indent example
Date: Thu, 22 Jul 2021 11:12:32 +0200 [thread overview]
Message-ID: <20210722091239.26451-2-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20210722091239.26451-1-jacopo+renesas@jmondi.org>
The dt-bindings examples are usually indented with 4 spaces.
The maxim,max9286 schema has the example indented with only
2 spaces, re-indent it.
Cosmetic change only.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
.../bindings/media/i2c/maxim,max9286.yaml | 214 +++++++++---------
1 file changed, 107 insertions(+), 107 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index ee16102fdfe7..0e7162998b77 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -191,140 +191,140 @@ examples:
#include <dt-bindings/gpio/gpio.h>
i2c@e66d8000 {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg = <0 0xe66d8000>;
+ reg = <0 0xe66d8000>;
- gmsl-deserializer@2c {
- compatible = "maxim,max9286";
- reg = <0x2c>;
- poc-supply = <&camera_poc_12v>;
- enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ gmsl-deserializer@2c {
+ compatible = "maxim,max9286";
+ reg = <0x2c>;
+ poc-supply = <&camera_poc_12v>;
+ enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
- maxim,reverse-channel-microvolt = <170000>;
+ maxim,reverse-channel-microvolt = <170000>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@0 {
+ reg = <0>;
- max9286_in0: endpoint {
- remote-endpoint = <&rdacm20_out0>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- max9286_in1: endpoint {
- remote-endpoint = <&rdacm20_out1>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- max9286_in2: endpoint {
- remote-endpoint = <&rdacm20_out2>;
- };
- };
+ max9286_in0: endpoint {
+ remote-endpoint = <&rdacm20_out0>;
+ };
+ };
- port@3 {
- reg = <3>;
+ port@1 {
+ reg = <1>;
- max9286_in3: endpoint {
- remote-endpoint = <&rdacm20_out3>;
- };
- };
+ max9286_in1: endpoint {
+ remote-endpoint = <&rdacm20_out1>;
+ };
+ };
- port@4 {
- reg = <4>;
+ port@2 {
+ reg = <2>;
- max9286_out: endpoint {
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&csi40_in>;
- };
- };
- };
+ max9286_in2: endpoint {
+ remote-endpoint = <&rdacm20_out2>;
+ };
+ };
- i2c-mux {
- #address-cells = <1>;
- #size-cells = <0>;
+ port@3 {
+ reg = <3>;
- i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
+ max9286_in3: endpoint {
+ remote-endpoint = <&rdacm20_out3>;
+ };
+ };
- camera@51 {
- compatible = "imi,rdacm20";
- reg = <0x51>, <0x61>;
+ port@4 {
+ reg = <4>;
- port {
- rdacm20_out0: endpoint {
- remote-endpoint = <&max9286_in0>;
+ max9286_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
};
- };
-
};
- };
-
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- camera@52 {
- compatible = "imi,rdacm20";
- reg = <0x52>, <0x62>;
+ i2c-mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port {
- rdacm20_out1: endpoint {
- remote-endpoint = <&max9286_in1>;
- };
- };
- };
- };
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
- i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
+ camera@51 {
+ compatible = "imi,rdacm20";
+ reg = <0x51>, <0x61>;
- camera@53 {
- compatible = "imi,rdacm20";
- reg = <0x53>, <0x63>;
+ port {
+ rdacm20_out0: endpoint {
+ remote-endpoint = <&max9286_in0>;
+ };
+ };
- port {
- rdacm20_out2: endpoint {
- remote-endpoint = <&max9286_in2>;
+ };
};
- };
- };
- };
- i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ camera@52 {
+ compatible = "imi,rdacm20";
+ reg = <0x52>, <0x62>;
+
+ port {
+ rdacm20_out1: endpoint {
+ remote-endpoint = <&max9286_in1>;
+ };
+ };
+ };
+ };
- camera@54 {
- compatible = "imi,rdacm20";
- reg = <0x54>, <0x64>;
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ camera@53 {
+ compatible = "imi,rdacm20";
+ reg = <0x53>, <0x63>;
+
+ port {
+ rdacm20_out2: endpoint {
+ remote-endpoint = <&max9286_in2>;
+ };
+ };
+ };
+ };
- port {
- rdacm20_out3: endpoint {
- remote-endpoint = <&max9286_in3>;
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ camera@54 {
+ compatible = "imi,rdacm20";
+ reg = <0x54>, <0x64>;
+
+ port {
+ rdacm20_out3: endpoint {
+ remote-endpoint = <&max9286_in3>;
+ };
+ };
+ };
};
- };
};
- };
};
- };
};
--
2.32.0
next prev parent reply other threads:[~2021-07-22 9:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-22 9:12 [PATCH v6 0/8] arm64: dts: renesas: Enable GMSL on Eagle and Condor Jacopo Mondi
2021-07-22 9:12 ` Jacopo Mondi [this message]
2021-07-22 9:12 ` [PATCH v6 2/8] dt-bindings: media: max9286: Define 'maxim,gpio-poc' Jacopo Mondi
2021-07-22 9:12 ` [PATCH v6 3/8] media: i2c: max9286: Use "maxim,gpio-poc" property Jacopo Mondi
2021-07-22 9:12 ` [PATCH v6 4/8] media: i2c: rdacm20: Re-program chip address earlier Jacopo Mondi
2021-07-22 9:12 ` [PATCH v6 5/8] arm64: dts: renesas: condor: Enable MAX9286 Jacopo Mondi
2021-07-22 9:12 ` [PATCH v6 6/8] arm64: dts: renesas: eagle: " Jacopo Mondi
2021-07-22 9:12 ` [PATCH v6 7/8] arm64: dts: renesas: Add GMSL cameras .dtsi Jacopo Mondi
2021-07-22 9:12 ` [PATCH v6 8/8] DNI: arm64: dts: renesas: eagle: Include eagle-gmsl Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210722091239.26451-2-jacopo+renesas@jmondi.org \
--to=jacopo+renesas@jmondi.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).