linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] Add sensor driver support for the ov13b10 camera.
@ 2021-08-11 10:24 Arec Kao
  2021-08-11 10:40 ` Sakari Ailus
  0 siblings, 1 reply; 4+ messages in thread
From: Arec Kao @ 2021-08-11 10:24 UTC (permalink / raw)
  To: linux-media; +Cc: sakari.ailus, andy.yeh, arec.kao, wei.shun.chang

This driver supports following features:

- phase detection auto focus (PDAF)
- manual exposure and analog/digital gain control
- vblank/hblank control
- test pattern
- image vertical flip and horizontal mirror control
- 4208x3120 at 30FPS
- 2080x1170 at 60FPS

Signed-off-by: Arec Kao <arec.kao@intel.com>
---
 drivers/media/i2c/Kconfig   |   10 +
 drivers/media/i2c/Makefile  |    1 +
 drivers/media/i2c/ov13b10.c | 1414 +++++++++++++++++++++++++++++++++++
 3 files changed, 1425 insertions(+)
 create mode 100644 drivers/media/i2c/ov13b10.c

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 08feb3e8c1bf..ebd90b7dafd9 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -1186,6 +1186,16 @@ config VIDEO_OV13858
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV13858 camera.
 
+config VIDEO_OV13B10
+	tristate "OmniVision OV13B10 sensor support"
+	depends on I2C && VIDEO_V4L2
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+	select V4L2_FWNODE
+	help
+	  This is a Video4Linux2 sensor driver for the OmniVision
+	  OV13B10 camera.
+
 config VIDEO_VS6624
 	tristate "ST VS6624 sensor support"
 	depends on VIDEO_V4L2 && I2C
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 83268f20aa3a..5ac8d639e5ca 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -89,6 +89,7 @@ obj-$(CONFIG_VIDEO_OV9640) += ov9640.o
 obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
 obj-$(CONFIG_VIDEO_OV9734) += ov9734.o
 obj-$(CONFIG_VIDEO_OV13858) += ov13858.o
+obj-$(CONFIG_VIDEO_OV13B10) += ov13b10.o
 obj-$(CONFIG_VIDEO_MT9M001) += mt9m001.o
 obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o
 obj-$(CONFIG_VIDEO_MT9M111) += mt9m111.o
diff --git a/drivers/media/i2c/ov13b10.c b/drivers/media/i2c/ov13b10.c
new file mode 100644
index 000000000000..1348352ebd59
--- /dev/null
+++ b/drivers/media/i2c/ov13b10.c
@@ -0,0 +1,1414 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Intel Corporation.
+
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+
+#define OV13B10_REG_VALUE_08BIT		1
+#define OV13B10_REG_VALUE_16BIT		2
+#define OV13B10_REG_VALUE_24BIT		3
+
+#define OV13B10_REG_MODE_SELECT		0x0100
+#define OV13B10_MODE_STANDBY		0x00
+#define OV13B10_MODE_STREAMING		0x01
+
+#define OV13B10_REG_SOFTWARE_RST	0x0103
+#define OV13B10_SOFTWARE_RST		0x01
+
+/* Chip ID */
+#define OV13B10_REG_CHIP_ID		0x300a
+#define OV13B10_CHIP_ID			0x560d42
+
+/* V_TIMING internal */
+#define OV13B10_REG_VTS			0x380e
+#define OV13B10_VTS_30FPS		0x0c7c
+#define OV13B10_VTS_60FPS		0x063e
+#define OV13B10_VTS_MAX			0x7fff
+
+/* HBLANK control - read only */
+#define OV13B10_PPL_560MHZ		4704
+
+/* Exposure control */
+#define OV13B10_REG_EXPOSURE		0x3500
+#define OV13B10_EXPOSURE_MIN		4
+#define OV13B10_EXPOSURE_STEP		1
+#define OV13B10_EXPOSURE_DEFAULT	0x40
+
+/* Analog gain control */
+#define OV13B10_REG_ANALOG_GAIN		0x3508
+#define OV13B10_ANA_GAIN_MIN		0x80
+#define OV13B10_ANA_GAIN_MAX		0x07c0
+#define OV13B10_ANA_GAIN_STEP		1
+#define OV13B10_ANA_GAIN_DEFAULT	0x80
+
+/* Digital gain control */
+#define OV13B10_REG_DGTL_GAIN_H		0x350a
+#define OV13B10_REG_DGTL_GAIN_M		0x350b
+#define OV13B10_REG_DGTL_GAIN_L		0x350c
+
+#define OV13B10_DGTL_GAIN_MIN		1024		/* Min = 1 X */
+#define OV13B10_DGTL_GAIN_MAX		(4096 - 1)	/* Max = 4 X */
+#define OV13B10_DGTL_GAIN_DEFAULT	2560		/* Default gain = 2.5 X */
+#define OV13B10_DGTL_GAIN_STEP		1		/* Each step = 1/1024 */
+
+#define OV13B10_DGTL_GAIN_L_SHIFT	6
+#define OV13B10_DGTL_GAIN_L_MASK	0x3
+#define OV13B10_DGTL_GAIN_M_SHIFT	2
+#define OV13B10_DGTL_GAIN_M_MASK	0xff
+#define OV13B10_DGTL_GAIN_H_SHIFT	10
+#define OV13B10_DGTL_GAIN_H_MASK	0x3
+
+/* Test Pattern Control */
+#define OV13B10_REG_TEST_PATTERN	0x5080
+#define OV13B10_TEST_PATTERN_ENABLE	BIT(7)
+#define OV13B10_TEST_PATTERN_MASK	0xf3
+#define OV13B10_TEST_PATTERN_BAR_SHIFT	2
+
+/* Flip Control */
+#define OV13B10_REG_FORMAT1		0x3820
+#define OV13B10_REG_FORMAT2		0x3821
+
+/* Horizontal Window Offset */
+#define OV13B10_REG_H_WIN_OFFSET	0x3811
+
+/* Vertical Window Offset */
+#define OV13B10_REG_V_WIN_OFFSET	0x3813
+
+struct ov13b10_reg {
+	u16 address;
+	u8 val;
+};
+
+struct ov13b10_reg_list {
+	u32 num_of_regs;
+	const struct ov13b10_reg *regs;
+};
+
+/* Link frequency config */
+struct ov13b10_link_freq_config {
+	u32 pixels_per_line;
+
+	/* registers for this link frequency */
+	struct ov13b10_reg_list reg_list;
+};
+
+/* Mode : resolution and related config&values */
+struct ov13b10_mode {
+	/* Frame width */
+	u32 width;
+	/* Frame height */
+	u32 height;
+
+	/* V-timing */
+	u32 vts_def;
+	u32 vts_min;
+
+	/* Index of Link frequency config to be used */
+	u32 link_freq_index;
+	/* Default register values */
+	struct ov13b10_reg_list reg_list;
+};
+
+/* 4208x3120 needs 1120Mbps/lane, 4 lanes */
+static const struct ov13b10_reg mipi_data_rate_1120mbps[] = {
+	{0x0103, 0x01},
+	{0x0303, 0x04},
+	{0x0305, 0xaf},
+	{0x0321, 0x00},
+	{0x0323, 0x04},
+	{0x0324, 0x01},
+	{0x0325, 0xa4},
+	{0x0326, 0x81},
+	{0x0327, 0x04},
+	{0x3012, 0x07},
+	{0x3013, 0x32},
+	{0x3107, 0x23},
+	{0x3501, 0x0c},
+	{0x3502, 0x10},
+	{0x3504, 0x08},
+	{0x3508, 0x07},
+	{0x3509, 0xc0},
+	{0x3600, 0x16},
+	{0x3601, 0x54},
+	{0x3612, 0x4e},
+	{0x3620, 0x00},
+	{0x3621, 0x68},
+	{0x3622, 0x66},
+	{0x3623, 0x03},
+	{0x3662, 0x92},
+	{0x3666, 0xbb},
+	{0x3667, 0x44},
+	{0x366e, 0xff},
+	{0x366f, 0xf3},
+	{0x3675, 0x44},
+	{0x3676, 0x00},
+	{0x367f, 0xe9},
+	{0x3681, 0x32},
+	{0x3682, 0x1f},
+	{0x3683, 0x0b},
+	{0x3684, 0x0b},
+	{0x3704, 0x0f},
+	{0x3706, 0x40},
+	{0x3708, 0x3b},
+	{0x3709, 0x72},
+	{0x370b, 0xa2},
+	{0x3714, 0x24},
+	{0x371a, 0x3e},
+	{0x3725, 0x42},
+	{0x3739, 0x12},
+	{0x3767, 0x00},
+	{0x377a, 0x0d},
+	{0x3789, 0x18},
+	{0x3790, 0x40},
+	{0x3791, 0xa2},
+	{0x37c2, 0x04},
+	{0x37c3, 0xf1},
+	{0x37d9, 0x0c},
+	{0x37da, 0x02},
+	{0x37dc, 0x02},
+	{0x37e1, 0x04},
+	{0x37e2, 0x0a},
+	{0x3800, 0x00},
+	{0x3801, 0x00},
+	{0x3802, 0x00},
+	{0x3803, 0x08},
+	{0x3804, 0x10},
+	{0x3805, 0x8f},
+	{0x3806, 0x0c},
+	{0x3807, 0x47},
+	{0x3808, 0x10},
+	{0x3809, 0x70},
+	{0x380a, 0x0c},
+	{0x380b, 0x30},
+	{0x380c, 0x04},
+	{0x380d, 0x98},
+	{0x380e, 0x0c},
+	{0x380f, 0x7c},
+	{0x3811, 0x0f},
+	{0x3813, 0x09},
+	{0x3814, 0x01},
+	{0x3815, 0x01},
+	{0x3816, 0x01},
+	{0x3817, 0x01},
+	{0x381f, 0x08},
+	{0x3820, 0x88},
+	{0x3821, 0x00},
+	{0x3822, 0x14},
+	{0x382e, 0xe6},
+	{0x3c80, 0x00},
+	{0x3c87, 0x01},
+	{0x3c8c, 0x19},
+	{0x3c8d, 0x1c},
+	{0x3ca0, 0x00},
+	{0x3ca1, 0x00},
+	{0x3ca2, 0x00},
+	{0x3ca3, 0x00},
+	{0x3ca4, 0x50},
+	{0x3ca5, 0x11},
+	{0x3ca6, 0x01},
+	{0x3ca7, 0x00},
+	{0x3ca8, 0x00},
+	{0x4008, 0x02},
+	{0x4009, 0x0f},
+	{0x400a, 0x01},
+	{0x400b, 0x19},
+	{0x4011, 0x21},
+	{0x4017, 0x08},
+	{0x4019, 0x04},
+	{0x401a, 0x58},
+	{0x4032, 0x1e},
+	{0x4050, 0x02},
+	{0x4051, 0x09},
+	{0x405e, 0x00},
+	{0x4066, 0x02},
+	{0x4501, 0x00},
+	{0x4502, 0x10},
+	{0x4505, 0x00},
+	{0x4800, 0x64},
+	{0x481b, 0x3e},
+	{0x481f, 0x30},
+	{0x4825, 0x34},
+	{0x4837, 0x0e},
+	{0x484b, 0x01},
+	{0x4883, 0x02},
+	{0x5000, 0xff},
+	{0x5001, 0x0f},
+	{0x5045, 0x20},
+	{0x5046, 0x20},
+	{0x5047, 0xa4},
+	{0x5048, 0x20},
+	{0x5049, 0xa4},
+	{0x0100, 0x01},
+};
+
+static const struct ov13b10_reg mode_4208x3120_regs[] = {
+	{0x0305, 0xaf},
+	{0x3501, 0x0c},
+	{0x3662, 0x92},
+	{0x3714, 0x24},
+	{0x3739, 0x12},
+	{0x37c2, 0x04},
+	{0x37d9, 0x0c},
+	{0x37e2, 0x0a},
+	{0x3800, 0x00},
+	{0x3801, 0x00},
+	{0x3802, 0x00},
+	{0x3803, 0x08},
+	{0x3804, 0x10},
+	{0x3805, 0x8f},
+	{0x3806, 0x0c},
+	{0x3807, 0x47},
+	{0x3808, 0x10},
+	{0x3809, 0x70},
+	{0x380a, 0x0c},
+	{0x380b, 0x30},
+	{0x380c, 0x04},
+	{0x380d, 0x98},
+	{0x380e, 0x0c},
+	{0x380f, 0x7c},
+	{0x3810, 0x00},
+	{0x3811, 0x0f},
+	{0x3812, 0x00},
+	{0x3813, 0x09},
+	{0x3814, 0x01},
+	{0x3816, 0x01},
+	{0x3820, 0x88},
+	{0x3c8c, 0x19},
+	{0x4008, 0x02},
+	{0x4009, 0x0f},
+	{0x4050, 0x02},
+	{0x4051, 0x09},
+	{0x4501, 0x00},
+	{0x4505, 0x00},
+	{0x4837, 0x0e},
+	{0x5000, 0xff},
+	{0x5001, 0x0f},
+};
+
+static const struct ov13b10_reg mode_4160x3120_regs[] = {
+	{0x0305, 0xaf},
+	{0x3501, 0x0c},
+	{0x3662, 0x92},
+	{0x3714, 0x24},
+	{0x3739, 0x12},
+	{0x37c2, 0x04},
+	{0x37d9, 0x0c},
+	{0x37e2, 0x0a},
+	{0x3800, 0x00},
+	{0x3801, 0x00},
+	{0x3802, 0x00},
+	{0x3803, 0x08},
+	{0x3804, 0x10},
+	{0x3805, 0x8f},
+	{0x3806, 0x0c},
+	{0x3807, 0x47},
+	{0x3808, 0x10},
+	{0x3809, 0x40},
+	{0x380a, 0x0c},
+	{0x380b, 0x30},
+	{0x380c, 0x04},
+	{0x380d, 0x98},
+	{0x380e, 0x0c},
+	{0x380f, 0x7c},
+	{0x3810, 0x00},
+	{0x3811, 0x27},
+	{0x3812, 0x00},
+	{0x3813, 0x09},
+	{0x3814, 0x01},
+	{0x3816, 0x01},
+	{0x3820, 0x88},
+	{0x3c8c, 0x19},
+	{0x4008, 0x02},
+	{0x4009, 0x0f},
+	{0x4050, 0x02},
+	{0x4051, 0x09},
+	{0x4501, 0x00},
+	{0x4505, 0x00},
+	{0x4837, 0x0e},
+	{0x5000, 0xff},
+	{0x5001, 0x0f},
+};
+
+static const struct ov13b10_reg mode_4160x2340_regs[] = {
+	{0x0305, 0xaf},
+	{0x3501, 0x0c},
+	{0x3662, 0x92},
+	{0x3714, 0x24},
+	{0x3739, 0x12},
+	{0x37c2, 0x04},
+	{0x37d9, 0x0c},
+	{0x37e2, 0x0a},
+	{0x3800, 0x00},
+	{0x3801, 0x00},
+	{0x3802, 0x00},
+	{0x3803, 0x08},
+	{0x3804, 0x10},
+	{0x3805, 0x8f},
+	{0x3806, 0x0c},
+	{0x3807, 0x47},
+	{0x3808, 0x10},
+	{0x3809, 0x40},
+	{0x380a, 0x09},
+	{0x380b, 0x24},
+	{0x380c, 0x04},
+	{0x380d, 0x98},
+	{0x380e, 0x0c},
+	{0x380f, 0x7c},
+	{0x3810, 0x00},
+	{0x3811, 0x27},
+	{0x3812, 0x01},
+	{0x3813, 0x8f},
+	{0x3814, 0x01},
+	{0x3816, 0x01},
+	{0x3820, 0x88},
+	{0x3c8c, 0x19},
+	{0x4008, 0x02},
+	{0x4009, 0x0f},
+	{0x4050, 0x02},
+	{0x4051, 0x09},
+	{0x4501, 0x00},
+	{0x4505, 0x00},
+	{0x4837, 0x0e},
+	{0x5000, 0xff},
+	{0x5001, 0x0f},
+};
+
+static const struct ov13b10_reg mode_2104x1560_regs[] = {
+	{0x0305, 0xaf},
+	{0x3501, 0x06},
+	{0x3662, 0x88},
+	{0x3714, 0x28},
+	{0x3739, 0x10},
+	{0x37c2, 0x14},
+	{0x37d9, 0x06},
+	{0x37e2, 0x0c},
+	{0x3800, 0x00},
+	{0x3801, 0x00},
+	{0x3802, 0x00},
+	{0x3803, 0x08},
+	{0x3804, 0x10},
+	{0x3805, 0x8f},
+	{0x3806, 0x0c},
+	{0x3807, 0x47},
+	{0x3808, 0x08},
+	{0x3809, 0x38},
+	{0x380a, 0x06},
+	{0x380b, 0x18},
+	{0x380c, 0x04},
+	{0x380d, 0x98},
+	{0x380e, 0x06},
+	{0x380f, 0x3e},
+	{0x3810, 0x00},
+	{0x3811, 0x07},
+	{0x3812, 0x00},
+	{0x3813, 0x05},
+	{0x3814, 0x03},
+	{0x3816, 0x03},
+	{0x3820, 0x8b},
+	{0x3c8c, 0x18},
+	{0x4008, 0x00},
+	{0x4009, 0x05},
+	{0x4050, 0x00},
+	{0x4051, 0x05},
+	{0x4501, 0x08},
+	{0x4505, 0x00},
+	{0x4837, 0x0e},
+	{0x5000, 0xfd},
+	{0x5001, 0x0d},
+};
+
+static const struct ov13b10_reg mode_2080x1170_regs[] = {
+	{0x0305, 0xaf},
+	{0x3501, 0x06},
+	{0x3662, 0x88},
+	{0x3714, 0x28},
+	{0x3739, 0x10},
+	{0x37c2, 0x14},
+	{0x37d9, 0x06},
+	{0x37e2, 0x0c},
+	{0x3800, 0x00},
+	{0x3801, 0x00},
+	{0x3802, 0x00},
+	{0x3803, 0x08},
+	{0x3804, 0x10},
+	{0x3805, 0x8f},
+	{0x3806, 0x0c},
+	{0x3807, 0x47},
+	{0x3808, 0x08},
+	{0x3809, 0x20},
+	{0x380a, 0x04},
+	{0x380b, 0x92},
+	{0x380c, 0x04},
+	{0x380d, 0x98},
+	{0x380e, 0x06},
+	{0x380f, 0x3e},
+	{0x3810, 0x00},
+	{0x3811, 0x13},
+	{0x3812, 0x00},
+	{0x3813, 0xc9},
+	{0x3814, 0x03},
+	{0x3816, 0x03},
+	{0x3820, 0x8b},
+	{0x3c8c, 0x18},
+	{0x4008, 0x00},
+	{0x4009, 0x05},
+	{0x4050, 0x00},
+	{0x4051, 0x05},
+	{0x4501, 0x08},
+	{0x4505, 0x00},
+	{0x4837, 0x0e},
+	{0x5000, 0xfd},
+	{0x5001, 0x0d},
+};
+
+static const char * const ov13b10_test_pattern_menu[] = {
+	"Disabled",
+	"Vertical Color Bar Type 1",
+	"Vertical Color Bar Type 2",
+	"Vertical Color Bar Type 3",
+	"Vertical Color Bar Type 4"
+};
+
+/* Configurations for supported link frequencies */
+#define OV13B10_NUM_OF_LINK_FREQS	1
+#define OV13B10_LINK_FREQ_560MHZ	560000000ULL
+#define OV13B10_LINK_FREQ_INDEX_0	0
+
+/*
+ * pixel_rate = link_freq * data-rate * nr_of_lanes / bits_per_sample
+ * data rate => double data rate; number of lanes => 4; bits per pixel => 10
+ */
+static u64 link_freq_to_pixel_rate(u64 f)
+{
+	f *= 2 * 4;
+	do_div(f, 10);
+
+	return f;
+}
+
+/* Menu items for LINK_FREQ V4L2 control */
+static const s64 link_freq_menu_items[OV13B10_NUM_OF_LINK_FREQS] = {
+	OV13B10_LINK_FREQ_560MHZ
+};
+
+/* Link frequency configs */
+static const struct ov13b10_link_freq_config
+			link_freq_configs[OV13B10_NUM_OF_LINK_FREQS] = {
+	{
+		.pixels_per_line = OV13B10_PPL_560MHZ,
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(mipi_data_rate_1120mbps),
+			.regs = mipi_data_rate_1120mbps,
+		}
+	}
+};
+
+/* Mode configs */
+static const struct ov13b10_mode supported_modes[] = {
+	{
+		.width = 4208,
+		.height = 3120,
+		.vts_def = OV13B10_VTS_30FPS,
+		.vts_min = OV13B10_VTS_30FPS,
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(mode_4208x3120_regs),
+			.regs = mode_4208x3120_regs,
+		},
+		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
+	},
+	{
+		.width = 4160,
+		.height = 3120,
+		.vts_def = OV13B10_VTS_30FPS,
+		.vts_min = OV13B10_VTS_30FPS,
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(mode_4160x3120_regs),
+			.regs = mode_4160x3120_regs,
+		},
+		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
+	},
+	{
+		.width = 4160,
+		.height = 2340,
+		.vts_def = OV13B10_VTS_30FPS,
+		.vts_min = OV13B10_VTS_30FPS,
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(mode_4160x2340_regs),
+			.regs = mode_4160x2340_regs,
+		},
+		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
+	},
+	{
+		.width = 2104,
+		.height = 1560,
+		.vts_def = OV13B10_VTS_60FPS,
+		.vts_min = OV13B10_VTS_60FPS,
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(mode_2104x1560_regs),
+			.regs = mode_2104x1560_regs,
+		},
+		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
+	},
+		{
+		.width = 2080,
+		.height = 1170,
+		.vts_def = OV13B10_VTS_60FPS,
+		.vts_min = OV13B10_VTS_60FPS,
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(mode_2080x1170_regs),
+			.regs = mode_2080x1170_regs,
+		},
+		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
+	}
+};
+
+struct ov13b10 {
+	struct v4l2_subdev sd;
+	struct media_pad pad;
+
+	struct v4l2_ctrl_handler ctrl_handler;
+	/* V4L2 Controls */
+	struct v4l2_ctrl *link_freq;
+	struct v4l2_ctrl *pixel_rate;
+	struct v4l2_ctrl *vblank;
+	struct v4l2_ctrl *hblank;
+	struct v4l2_ctrl *exposure;
+
+	/* Current mode */
+	const struct ov13b10_mode *cur_mode;
+
+	/* Mutex for serialized access */
+	struct mutex mutex;
+
+	/* Streaming on/off */
+	bool streaming;
+};
+
+#define to_ov13b10(_sd)	container_of(_sd, struct ov13b10, sd)
+
+/* Read registers up to 4 at a time */
+static int ov13b10_read_reg(struct ov13b10 *ov13b,
+			    u16 reg, u32 len, u32 *val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
+	struct i2c_msg msgs[2];
+	u8 *data_be_p;
+	int ret;
+	__be32 data_be = 0;
+	__be16 reg_addr_be = cpu_to_be16(reg);
+
+	if (len > 4)
+		return -EINVAL;
+
+	data_be_p = (u8 *)&data_be;
+	/* Write register address */
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = 2;
+	msgs[0].buf = (u8 *)&reg_addr_be;
+
+	/* Read data from register */
+	msgs[1].addr = client->addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = len;
+	msgs[1].buf = &data_be_p[4 - len];
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret != ARRAY_SIZE(msgs))
+		return -EIO;
+
+	*val = be32_to_cpu(data_be);
+
+	return 0;
+}
+
+/* Write registers up to 4 at a time */
+static int ov13b10_write_reg(struct ov13b10 *ov13b,
+			     u16 reg, u32 len, u32 __val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
+	int buf_i, val_i;
+	u8 buf[6], *val_p;
+	__be32 val;
+
+	if (len > 4)
+		return -EINVAL;
+
+	buf[0] = reg >> 8;
+	buf[1] = reg & 0xff;
+
+	val = cpu_to_be32(__val);
+	val_p = (u8 *)&val;
+	buf_i = 2;
+	val_i = 4 - len;
+
+	while (val_i < 4)
+		buf[buf_i++] = val_p[val_i++];
+
+	if (i2c_master_send(client, buf, len + 2) != len + 2)
+		return -EIO;
+
+	return 0;
+}
+
+/* Write a list of registers */
+static int ov13b10_write_regs(struct ov13b10 *ov13b,
+			      const struct ov13b10_reg *regs, u32 len)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
+	int ret;
+	u32 i;
+
+	for (i = 0; i < len; i++) {
+		ret = ov13b10_write_reg(ov13b, regs[i].address, 1,
+					regs[i].val);
+		if (ret) {
+			dev_err_ratelimited(
+				&client->dev,
+				"Failed to write reg 0x%4.4x. error = %d\n",
+				regs[i].address, ret);
+
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int ov13b10_write_reg_list(struct ov13b10 *ov13b,
+				  const struct ov13b10_reg_list *r_list)
+{
+	return ov13b10_write_regs(ov13b, r_list->regs, r_list->num_of_regs);
+}
+
+/* Open sub-device */
+static int ov13b10_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	struct ov13b10 *ov13b = to_ov13b10(sd);
+	struct v4l2_mbus_framefmt *try_fmt = v4l2_subdev_get_try_format(sd,
+									fh->state,
+									0);
+
+	mutex_lock(&ov13b->mutex);
+
+	/* Initialize try_fmt */
+	try_fmt->width = ov13b->cur_mode->width;
+	try_fmt->height = ov13b->cur_mode->height;
+	try_fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+	try_fmt->field = V4L2_FIELD_NONE;
+
+	/* No crop or compose */
+	mutex_unlock(&ov13b->mutex);
+
+	return 0;
+}
+
+static int ov13b10_update_digital_gain(struct ov13b10 *ov13b, u32 d_gain)
+{
+	int ret;
+	u32 val;
+
+	/*
+	 * 0x350C[7:6], 0x350B[7:0], 0x350A[1:0]
+	 */
+
+	val = (d_gain & OV13B10_DGTL_GAIN_L_MASK) << OV13B10_DGTL_GAIN_L_SHIFT;
+	ret = ov13b10_write_reg(ov13b, OV13B10_REG_DGTL_GAIN_L,
+				OV13B10_REG_VALUE_08BIT, val);
+	if (ret)
+		return ret;
+
+	val = (d_gain >> OV13B10_DGTL_GAIN_M_SHIFT) & OV13B10_DGTL_GAIN_M_MASK;
+	ret = ov13b10_write_reg(ov13b, OV13B10_REG_DGTL_GAIN_M,
+				OV13B10_REG_VALUE_08BIT, val);
+	if (ret)
+		return ret;
+
+	val = (d_gain >> OV13B10_DGTL_GAIN_H_SHIFT) & OV13B10_DGTL_GAIN_H_MASK;
+	ret = ov13b10_write_reg(ov13b, OV13B10_REG_DGTL_GAIN_H,
+				OV13B10_REG_VALUE_08BIT, val);
+
+	return ret;
+}
+
+static int ov13b10_enable_test_pattern(struct ov13b10 *ov13b, u32 pattern)
+{
+	int ret;
+	u32 val;
+
+	ret = ov13b10_read_reg(ov13b, OV13B10_REG_TEST_PATTERN,
+			       OV13B10_REG_VALUE_08BIT, &val);
+	if (ret)
+		return ret;
+
+	if (pattern) {
+		val &= OV13B10_TEST_PATTERN_MASK;
+		val |= ((pattern - 1) << OV13B10_TEST_PATTERN_BAR_SHIFT) |
+		     OV13B10_TEST_PATTERN_ENABLE;
+	} else {
+		val &= ~OV13B10_TEST_PATTERN_ENABLE;
+	}
+
+	return ov13b10_write_reg(ov13b, OV13B10_REG_TEST_PATTERN,
+				 OV13B10_REG_VALUE_08BIT, val);
+}
+
+static int ov13b10_set_ctrl_hflip(struct ov13b10 *ov13b, u32 ctrl_val)
+{
+	int ret;
+	u32 val;
+
+	ret = ov13b10_read_reg(ov13b, OV13B10_REG_FORMAT1,
+			       OV13B10_REG_VALUE_08BIT, &val);
+	if (ret)
+		return ret;
+
+	ret = ov13b10_write_reg(ov13b, OV13B10_REG_FORMAT1,
+				OV13B10_REG_VALUE_08BIT,
+				ctrl_val ? val & ~BIT(3) : val);
+
+	if (ret)
+		return ret;
+
+	ret = ov13b10_read_reg(ov13b, OV13B10_REG_H_WIN_OFFSET,
+			       OV13B10_REG_VALUE_08BIT, &val);
+	if (ret)
+		return ret;
+
+	return ov13b10_write_reg(ov13b, OV13B10_REG_H_WIN_OFFSET,
+				 OV13B10_REG_VALUE_08BIT,
+				 ctrl_val ? ++val : val);
+}
+
+static int ov13b10_set_ctrl_vflip(struct ov13b10 *ov13b, u32 ctrl_val)
+{
+	int ret;
+	u32 val;
+
+	ret = ov13b10_read_reg(ov13b, OV13B10_REG_FORMAT1,
+			       OV13B10_REG_VALUE_08BIT, &val);
+	if (ret)
+		return ret;
+
+	ret = ov13b10_write_reg(ov13b, OV13B10_REG_FORMAT1,
+				OV13B10_REG_VALUE_08BIT,
+				ctrl_val ? val | BIT(4) | BIT(5)  : val);
+
+	if (ret)
+		return ret;
+
+	ret = ov13b10_read_reg(ov13b, OV13B10_REG_V_WIN_OFFSET,
+			       OV13B10_REG_VALUE_08BIT, &val);
+	if (ret)
+		return ret;
+
+	return ov13b10_write_reg(ov13b, OV13B10_REG_V_WIN_OFFSET,
+				 OV13B10_REG_VALUE_08BIT,
+				 ctrl_val ? --val : val);
+}
+
+static int ov13b10_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct ov13b10 *ov13b = container_of(ctrl->handler,
+					     struct ov13b10, ctrl_handler);
+	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
+	s64 max;
+	int ret;
+
+	/* Propagate change of current control to all related controls */
+	switch (ctrl->id) {
+	case V4L2_CID_VBLANK:
+		/* Update max exposure while meeting expected vblanking */
+		max = ov13b->cur_mode->height + ctrl->val - 8;
+		__v4l2_ctrl_modify_range(ov13b->exposure,
+					 ov13b->exposure->minimum,
+					 max, ov13b->exposure->step, max);
+		break;
+	}
+
+	/*
+	 * Applying V4L2 control value only happens
+	 * when power is up for streaming
+	 */
+	if (!pm_runtime_get_if_in_use(&client->dev))
+		return 0;
+
+	ret = 0;
+	switch (ctrl->id) {
+	case V4L2_CID_ANALOGUE_GAIN:
+		ret = ov13b10_write_reg(ov13b, OV13B10_REG_ANALOG_GAIN,
+					OV13B10_REG_VALUE_16BIT,
+					ctrl->val << 1);
+		break;
+	case V4L2_CID_DIGITAL_GAIN:
+		ret = ov13b10_update_digital_gain(ov13b, ctrl->val);
+		break;
+	case V4L2_CID_EXPOSURE:
+		ret = ov13b10_write_reg(ov13b, OV13B10_REG_EXPOSURE,
+					OV13B10_REG_VALUE_24BIT,
+					ctrl->val);
+		break;
+	case V4L2_CID_VBLANK:
+		ret = ov13b10_write_reg(ov13b, OV13B10_REG_VTS,
+					OV13B10_REG_VALUE_16BIT,
+					ov13b->cur_mode->height
+					  + ctrl->val);
+		break;
+	case V4L2_CID_TEST_PATTERN:
+		ret = ov13b10_enable_test_pattern(ov13b, ctrl->val);
+		break;
+	case V4L2_CID_HFLIP:
+		ov13b10_set_ctrl_hflip(ov13b, ctrl->val);
+		break;
+	case V4L2_CID_VFLIP:
+		ov13b10_set_ctrl_vflip(ov13b, ctrl->val);
+		break;
+	default:
+		dev_info(&client->dev,
+			 "ctrl(id:0x%x,val:0x%x) is not handled\n",
+			 ctrl->id, ctrl->val);
+		break;
+	}
+
+	pm_runtime_put(&client->dev);
+
+	return ret;
+}
+
+static const struct v4l2_ctrl_ops ov13b10_ctrl_ops = {
+	.s_ctrl = ov13b10_set_ctrl,
+};
+
+static int ov13b10_enum_mbus_code(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_state *sd_state,
+				  struct v4l2_subdev_mbus_code_enum *code)
+{
+	/* Only one bayer order(GRBG) is supported */
+	if (code->index > 0)
+		return -EINVAL;
+
+	code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+
+	return 0;
+}
+
+static int ov13b10_enum_frame_size(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_state *sd_state,
+				   struct v4l2_subdev_frame_size_enum *fse)
+{
+	if (fse->index >= ARRAY_SIZE(supported_modes))
+		return -EINVAL;
+
+	if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
+		return -EINVAL;
+
+	fse->min_width = supported_modes[fse->index].width;
+	fse->max_width = fse->min_width;
+	fse->min_height = supported_modes[fse->index].height;
+	fse->max_height = fse->min_height;
+
+	return 0;
+}
+
+static void ov13b10_update_pad_format(const struct ov13b10_mode *mode,
+				      struct v4l2_subdev_format *fmt)
+{
+	fmt->format.width = mode->width;
+	fmt->format.height = mode->height;
+	fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
+	fmt->format.field = V4L2_FIELD_NONE;
+}
+
+static int ov13b10_do_get_pad_format(struct ov13b10 *ov13b,
+				     struct v4l2_subdev_state *sd_state,
+				     struct v4l2_subdev_format *fmt)
+{
+	struct v4l2_mbus_framefmt *framefmt;
+	struct v4l2_subdev *sd = &ov13b->sd;
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
+		fmt->format = *framefmt;
+	} else {
+		ov13b10_update_pad_format(ov13b->cur_mode, fmt);
+	}
+
+	return 0;
+}
+
+static int ov13b10_get_pad_format(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_state *sd_state,
+				  struct v4l2_subdev_format *fmt)
+{
+	struct ov13b10 *ov13b = to_ov13b10(sd);
+	int ret;
+
+	mutex_lock(&ov13b->mutex);
+	ret = ov13b10_do_get_pad_format(ov13b, sd_state, fmt);
+	mutex_unlock(&ov13b->mutex);
+
+	return ret;
+}
+
+static int
+ov13b10_set_pad_format(struct v4l2_subdev *sd,
+		       struct v4l2_subdev_state *sd_state,
+		       struct v4l2_subdev_format *fmt)
+{
+	struct ov13b10 *ov13b = to_ov13b10(sd);
+	const struct ov13b10_mode *mode;
+	struct v4l2_mbus_framefmt *framefmt;
+	s32 vblank_def;
+	s32 vblank_min;
+	s64 h_blank;
+	s64 pixel_rate;
+	s64 link_freq;
+
+	mutex_lock(&ov13b->mutex);
+
+	/* Only one raw bayer(GRBG) order is supported */
+	if (fmt->format.code != MEDIA_BUS_FMT_SGRBG10_1X10)
+		fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
+
+	mode = v4l2_find_nearest_size(supported_modes,
+				      ARRAY_SIZE(supported_modes),
+				      width, height,
+				      fmt->format.width, fmt->format.height);
+	ov13b10_update_pad_format(mode, fmt);
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
+		*framefmt = fmt->format;
+	} else {
+		ov13b->cur_mode = mode;
+		__v4l2_ctrl_s_ctrl(ov13b->link_freq, mode->link_freq_index);
+		link_freq = link_freq_menu_items[mode->link_freq_index];
+		pixel_rate = link_freq_to_pixel_rate(link_freq);
+		__v4l2_ctrl_s_ctrl_int64(ov13b->pixel_rate, pixel_rate);
+
+		/* Update limits and set FPS to default */
+		vblank_def = ov13b->cur_mode->vts_def -
+			     ov13b->cur_mode->height;
+		vblank_min = ov13b->cur_mode->vts_min -
+			     ov13b->cur_mode->height;
+		__v4l2_ctrl_modify_range(
+			ov13b->vblank, vblank_min,
+			OV13B10_VTS_MAX - ov13b->cur_mode->height, 1,
+			vblank_def);
+		__v4l2_ctrl_s_ctrl(ov13b->vblank, vblank_def);
+		h_blank =
+			link_freq_configs[mode->link_freq_index].pixels_per_line
+			 - ov13b->cur_mode->width;
+		__v4l2_ctrl_modify_range(ov13b->hblank, h_blank,
+					 h_blank, 1, h_blank);
+	}
+
+	mutex_unlock(&ov13b->mutex);
+
+	return 0;
+}
+
+static int ov13b10_start_streaming(struct ov13b10 *ov13b)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
+	const struct ov13b10_reg_list *reg_list;
+	int ret, link_freq_index;
+
+	/* Get out of from software reset */
+	ret = ov13b10_write_reg(ov13b, OV13B10_REG_SOFTWARE_RST,
+				OV13B10_REG_VALUE_08BIT, OV13B10_SOFTWARE_RST);
+	if (ret) {
+		dev_err(&client->dev, "%s failed to set powerup registers\n",
+			__func__);
+		return ret;
+	}
+
+	link_freq_index = ov13b->cur_mode->link_freq_index;
+	reg_list = &link_freq_configs[link_freq_index].reg_list;
+	ret = ov13b10_write_reg_list(ov13b, reg_list);
+	if (ret) {
+		dev_err(&client->dev, "%s failed to set plls\n", __func__);
+		return ret;
+	}
+
+	/* Apply default values of current mode */
+	reg_list = &ov13b->cur_mode->reg_list;
+	ret = ov13b10_write_reg_list(ov13b, reg_list);
+	if (ret) {
+		dev_err(&client->dev, "%s failed to set mode\n", __func__);
+		return ret;
+	}
+
+	/* Apply customized values from user */
+	ret =  __v4l2_ctrl_handler_setup(ov13b->sd.ctrl_handler);
+	if (ret)
+		return ret;
+
+	return ov13b10_write_reg(ov13b, OV13B10_REG_MODE_SELECT,
+				 OV13B10_REG_VALUE_08BIT,
+				 OV13B10_MODE_STREAMING);
+}
+
+/* Stop streaming */
+static int ov13b10_stop_streaming(struct ov13b10 *ov13b)
+{
+	return ov13b10_write_reg(ov13b, OV13B10_REG_MODE_SELECT,
+				 OV13B10_REG_VALUE_08BIT, OV13B10_MODE_STANDBY);
+}
+
+static int ov13b10_set_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct ov13b10 *ov13b = to_ov13b10(sd);
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret = 0;
+
+	mutex_lock(&ov13b->mutex);
+	if (ov13b->streaming == enable) {
+		mutex_unlock(&ov13b->mutex);
+		return 0;
+	}
+
+	if (enable) {
+		ret = pm_runtime_resume_and_get(&client->dev);
+		if (ret < 0)
+			goto err_unlock;
+
+		/*
+		 * Apply default & customized values
+		 * and then start streaming.
+		 */
+		ret = ov13b10_start_streaming(ov13b);
+		if (ret)
+			goto err_rpm_put;
+	} else {
+		ov13b10_stop_streaming(ov13b);
+		pm_runtime_put(&client->dev);
+	}
+
+	ov13b->streaming = enable;
+	mutex_unlock(&ov13b->mutex);
+
+	return ret;
+
+err_rpm_put:
+	pm_runtime_put(&client->dev);
+err_unlock:
+	mutex_unlock(&ov13b->mutex);
+
+	return ret;
+}
+
+static int __maybe_unused ov13b10_suspend(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct ov13b10 *ov13b = to_ov13b10(sd);
+
+	if (ov13b->streaming)
+		ov13b10_stop_streaming(ov13b);
+
+	return 0;
+}
+
+static int __maybe_unused ov13b10_resume(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct ov13b10 *ov13b = to_ov13b10(sd);
+	int ret;
+
+	if (ov13b->streaming) {
+		ret = ov13b10_start_streaming(ov13b);
+		if (ret)
+			goto error;
+	}
+
+	return 0;
+
+error:
+	ov13b10_stop_streaming(ov13b);
+	ov13b->streaming = false;
+	return ret;
+}
+
+/* Verify chip ID */
+static int ov13b10_identify_module(struct ov13b10 *ov13b)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
+	int ret;
+	u32 val;
+
+	ret = ov13b10_read_reg(ov13b, OV13B10_REG_CHIP_ID,
+			       OV13B10_REG_VALUE_24BIT, &val);
+	if (ret)
+		return ret;
+
+	if (val != OV13B10_CHIP_ID) {
+		dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
+			OV13B10_CHIP_ID, val);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops ov13b10_video_ops = {
+	.s_stream = ov13b10_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops ov13b10_pad_ops = {
+	.enum_mbus_code = ov13b10_enum_mbus_code,
+	.get_fmt = ov13b10_get_pad_format,
+	.set_fmt = ov13b10_set_pad_format,
+	.enum_frame_size = ov13b10_enum_frame_size,
+};
+
+static const struct v4l2_subdev_ops ov13b10_subdev_ops = {
+	.video = &ov13b10_video_ops,
+	.pad = &ov13b10_pad_ops,
+};
+
+static const struct media_entity_operations ov13b10_subdev_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static const struct v4l2_subdev_internal_ops ov13b10_internal_ops = {
+	.open = ov13b10_open,
+};
+
+/* Initialize control handlers */
+static int ov13b10_init_controls(struct ov13b10 *ov13b)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
+	struct v4l2_fwnode_device_properties props;
+	struct v4l2_ctrl_handler *ctrl_hdlr;
+	s64 exposure_max;
+	s64 vblank_def;
+	s64 vblank_min;
+	s64 hblank;
+	s64 pixel_rate_min;
+	s64 pixel_rate_max;
+	const struct ov13b10_mode *mode;
+	int ret;
+
+	ctrl_hdlr = &ov13b->ctrl_handler;
+	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10);
+	if (ret)
+		return ret;
+
+	mutex_init(&ov13b->mutex);
+	ctrl_hdlr->lock = &ov13b->mutex;
+	ov13b->link_freq = v4l2_ctrl_new_int_menu(
+				ctrl_hdlr,
+				&ov13b10_ctrl_ops,
+				V4L2_CID_LINK_FREQ,
+				OV13B10_NUM_OF_LINK_FREQS - 1,
+				0,
+				link_freq_menu_items);
+	if (ov13b->link_freq)
+		ov13b->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]);
+	pixel_rate_min = 0;
+	/* By default, PIXEL_RATE is read only */
+	ov13b->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops,
+					      V4L2_CID_PIXEL_RATE,
+					      pixel_rate_min, pixel_rate_max,
+					      1, pixel_rate_max);
+
+	mode = ov13b->cur_mode;
+	vblank_def = mode->vts_def - mode->height;
+	vblank_min = mode->vts_min - mode->height;
+	ov13b->vblank = v4l2_ctrl_new_std(
+				ctrl_hdlr, &ov13b10_ctrl_ops, V4L2_CID_VBLANK,
+				vblank_min, OV13B10_VTS_MAX - mode->height, 1,
+				vblank_def);
+
+	hblank = link_freq_configs[mode->link_freq_index].pixels_per_line -
+		 mode->width;
+	ov13b->hblank = v4l2_ctrl_new_std(
+				ctrl_hdlr, &ov13b10_ctrl_ops, V4L2_CID_HBLANK,
+				hblank, hblank, 1, hblank);
+	if (ov13b->hblank)
+		ov13b->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	exposure_max = mode->vts_def - 8;
+	ov13b->exposure = v4l2_ctrl_new_std(
+				ctrl_hdlr, &ov13b10_ctrl_ops,
+				V4L2_CID_EXPOSURE, OV13B10_EXPOSURE_MIN,
+				exposure_max, OV13B10_EXPOSURE_STEP,
+				exposure_max);
+
+	v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
+			  OV13B10_ANA_GAIN_MIN, OV13B10_ANA_GAIN_MAX,
+			  OV13B10_ANA_GAIN_STEP, OV13B10_ANA_GAIN_DEFAULT);
+
+	/* Digital gain */
+	v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
+			  OV13B10_DGTL_GAIN_MIN, OV13B10_DGTL_GAIN_MAX,
+			  OV13B10_DGTL_GAIN_STEP, OV13B10_DGTL_GAIN_DEFAULT);
+
+	v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &ov13b10_ctrl_ops,
+				     V4L2_CID_TEST_PATTERN,
+				     ARRAY_SIZE(ov13b10_test_pattern_menu) - 1,
+				     0, 0, ov13b10_test_pattern_menu);
+
+	v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops,
+			  V4L2_CID_HFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops,
+			  V4L2_CID_VFLIP, 0, 1, 1, 0);
+
+	if (ctrl_hdlr->error) {
+		ret = ctrl_hdlr->error;
+		dev_err(&client->dev, "%s control init failed (%d)\n",
+			__func__, ret);
+		goto error;
+	}
+
+	ret = v4l2_fwnode_device_parse(&client->dev, &props);
+	if (ret)
+		goto error;
+
+	ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &ov13b10_ctrl_ops,
+					      &props);
+	if (ret)
+		goto error;
+
+	ov13b->sd.ctrl_handler = ctrl_hdlr;
+
+	return 0;
+
+error:
+	v4l2_ctrl_handler_free(ctrl_hdlr);
+	mutex_destroy(&ov13b->mutex);
+
+	return ret;
+}
+
+static void ov13b10_free_controls(struct ov13b10 *ov13b)
+{
+	v4l2_ctrl_handler_free(ov13b->sd.ctrl_handler);
+	mutex_destroy(&ov13b->mutex);
+}
+
+static int ov13b10_probe(struct i2c_client *client)
+{
+	struct ov13b10 *ov13b;
+	int ret;
+	u32 val = 0;
+
+	device_property_read_u32(&client->dev, "clock-frequency", &val);
+	if (val != 19200000)
+		return -EINVAL;
+
+	ov13b = devm_kzalloc(&client->dev, sizeof(*ov13b), GFP_KERNEL);
+	if (!ov13b)
+		return -ENOMEM;
+
+	/* Initialize subdev */
+	v4l2_i2c_subdev_init(&ov13b->sd, client, &ov13b10_subdev_ops);
+
+	/* Check module identity */
+	ret = ov13b10_identify_module(ov13b);
+	if (ret) {
+		dev_err(&client->dev, "failed to find sensor: %d\n", ret);
+		return ret;
+	}
+
+	/* Set default mode to max resolution */
+	ov13b->cur_mode = &supported_modes[0];
+
+	ret = ov13b10_init_controls(ov13b);
+	if (ret)
+		return ret;
+
+	/* Initialize subdev */
+	ov13b->sd.internal_ops = &ov13b10_internal_ops;
+	ov13b->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	ov13b->sd.entity.ops = &ov13b10_subdev_entity_ops;
+	ov13b->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+	/* Initialize source pad */
+	ov13b->pad.flags = MEDIA_PAD_FL_SOURCE;
+	ret = media_entity_pads_init(&ov13b->sd.entity, 1, &ov13b->pad);
+	if (ret) {
+		dev_err(&client->dev, "%s failed:%d\n", __func__, ret);
+		goto error_handler_free;
+	}
+
+	ret = v4l2_async_register_subdev_sensor(&ov13b->sd);
+	if (ret < 0)
+		goto error_media_entity;
+
+	/*
+	 * Device is already turned on by i2c-core with ACPI domain PM.
+	 * Enable runtime PM and turn off the device.
+	 */
+	pm_runtime_set_active(&client->dev);
+	pm_runtime_enable(&client->dev);
+	pm_runtime_idle(&client->dev);
+
+	return 0;
+
+error_media_entity:
+	media_entity_cleanup(&ov13b->sd.entity);
+
+error_handler_free:
+	ov13b10_free_controls(ov13b);
+	dev_err(&client->dev, "%s failed:%d\n", __func__, ret);
+
+	return ret;
+}
+
+static int ov13b10_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct ov13b10 *ov13b = to_ov13b10(sd);
+
+	v4l2_async_unregister_subdev(sd);
+	media_entity_cleanup(&sd->entity);
+	ov13b10_free_controls(ov13b);
+
+	pm_runtime_disable(&client->dev);
+
+	return 0;
+}
+
+static const struct i2c_device_id ov13b10_id_table[] = {
+	{"ov13b10", 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, ov13b10_id_table);
+
+static const struct dev_pm_ops ov13b10_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ov13b10_suspend, ov13b10_resume)
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id ov13b10_acpi_ids[] = {
+	{"OVTIDB10"},
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(acpi, ov13b10_acpi_ids);
+#endif
+
+static struct i2c_driver ov13b10_i2c_driver = {
+	.driver = {
+		.name = "ov13b10",
+		.pm = &ov13b10_pm_ops,
+		.acpi_match_table = ACPI_PTR(ov13b10_acpi_ids),
+	},
+	.probe_new = ov13b10_probe,
+	.remove = ov13b10_remove,
+	.id_table = ov13b10_id_table,
+};
+
+module_i2c_driver(ov13b10_i2c_driver);
+
+MODULE_AUTHOR("Kao, Arec <arec.kao@intel.com>");
+MODULE_DESCRIPTION("Omnivision ov13b10 sensor driver");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH] Add sensor driver support for the ov13b10 camera.
  2021-08-11 10:24 [PATCH] Add sensor driver support for the ov13b10 camera Arec Kao
@ 2021-08-11 10:40 ` Sakari Ailus
  2021-08-12  3:38   ` Kao, Arec
  0 siblings, 1 reply; 4+ messages in thread
From: Sakari Ailus @ 2021-08-11 10:40 UTC (permalink / raw)
  To: Arec Kao; +Cc: linux-media, andy.yeh, wei.shun.chang

Hi Arec,

Thanks for the patch.

A few small comments below.

On Wed, Aug 11, 2021 at 06:24:02PM +0800, Arec Kao wrote:
> This driver supports following features:
> 
> - phase detection auto focus (PDAF)
> - manual exposure and analog/digital gain control
> - vblank/hblank control
> - test pattern
> - image vertical flip and horizontal mirror control
> - 4208x3120 at 30FPS
> - 2080x1170 at 60FPS
> 
> Signed-off-by: Arec Kao <arec.kao@intel.com>
> ---
>  drivers/media/i2c/Kconfig   |   10 +
>  drivers/media/i2c/Makefile  |    1 +
>  drivers/media/i2c/ov13b10.c | 1414 +++++++++++++++++++++++++++++++++++
>  3 files changed, 1425 insertions(+)
>  create mode 100644 drivers/media/i2c/ov13b10.c
> 
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 08feb3e8c1bf..ebd90b7dafd9 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -1186,6 +1186,16 @@ config VIDEO_OV13858
>  	  This is a Video4Linux2 sensor driver for the OmniVision
>  	  OV13858 camera.
>  
> +config VIDEO_OV13B10
> +	tristate "OmniVision OV13B10 sensor support"
> +	depends on I2C && VIDEO_V4L2
> +	select MEDIA_CONTROLLER
> +	select VIDEO_V4L2_SUBDEV_API
> +	select V4L2_FWNODE
> +	help
> +	  This is a Video4Linux2 sensor driver for the OmniVision
> +	  OV13B10 camera.
> +
>  config VIDEO_VS6624
>  	tristate "ST VS6624 sensor support"
>  	depends on VIDEO_V4L2 && I2C
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index 83268f20aa3a..5ac8d639e5ca 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -89,6 +89,7 @@ obj-$(CONFIG_VIDEO_OV9640) += ov9640.o
>  obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
>  obj-$(CONFIG_VIDEO_OV9734) += ov9734.o
>  obj-$(CONFIG_VIDEO_OV13858) += ov13858.o
> +obj-$(CONFIG_VIDEO_OV13B10) += ov13b10.o
>  obj-$(CONFIG_VIDEO_MT9M001) += mt9m001.o
>  obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o
>  obj-$(CONFIG_VIDEO_MT9M111) += mt9m111.o
> diff --git a/drivers/media/i2c/ov13b10.c b/drivers/media/i2c/ov13b10.c
> new file mode 100644
> index 000000000000..1348352ebd59
> --- /dev/null
> +++ b/drivers/media/i2c/ov13b10.c
> @@ -0,0 +1,1414 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2021 Intel Corporation.
> +
> +#include <linux/acpi.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
> +
> +#define OV13B10_REG_VALUE_08BIT		1
> +#define OV13B10_REG_VALUE_16BIT		2
> +#define OV13B10_REG_VALUE_24BIT		3
> +
> +#define OV13B10_REG_MODE_SELECT		0x0100
> +#define OV13B10_MODE_STANDBY		0x00
> +#define OV13B10_MODE_STREAMING		0x01
> +
> +#define OV13B10_REG_SOFTWARE_RST	0x0103
> +#define OV13B10_SOFTWARE_RST		0x01
> +
> +/* Chip ID */
> +#define OV13B10_REG_CHIP_ID		0x300a
> +#define OV13B10_CHIP_ID			0x560d42
> +
> +/* V_TIMING internal */
> +#define OV13B10_REG_VTS			0x380e
> +#define OV13B10_VTS_30FPS		0x0c7c
> +#define OV13B10_VTS_60FPS		0x063e
> +#define OV13B10_VTS_MAX			0x7fff
> +
> +/* HBLANK control - read only */
> +#define OV13B10_PPL_560MHZ		4704
> +
> +/* Exposure control */
> +#define OV13B10_REG_EXPOSURE		0x3500
> +#define OV13B10_EXPOSURE_MIN		4
> +#define OV13B10_EXPOSURE_STEP		1
> +#define OV13B10_EXPOSURE_DEFAULT	0x40
> +
> +/* Analog gain control */
> +#define OV13B10_REG_ANALOG_GAIN		0x3508
> +#define OV13B10_ANA_GAIN_MIN		0x80
> +#define OV13B10_ANA_GAIN_MAX		0x07c0
> +#define OV13B10_ANA_GAIN_STEP		1
> +#define OV13B10_ANA_GAIN_DEFAULT	0x80
> +
> +/* Digital gain control */
> +#define OV13B10_REG_DGTL_GAIN_H		0x350a
> +#define OV13B10_REG_DGTL_GAIN_M		0x350b
> +#define OV13B10_REG_DGTL_GAIN_L		0x350c
> +
> +#define OV13B10_DGTL_GAIN_MIN		1024		/* Min = 1 X */
> +#define OV13B10_DGTL_GAIN_MAX		(4096 - 1)	/* Max = 4 X */
> +#define OV13B10_DGTL_GAIN_DEFAULT	2560		/* Default gain = 2.5 X */
> +#define OV13B10_DGTL_GAIN_STEP		1		/* Each step = 1/1024 */
> +
> +#define OV13B10_DGTL_GAIN_L_SHIFT	6
> +#define OV13B10_DGTL_GAIN_L_MASK	0x3
> +#define OV13B10_DGTL_GAIN_M_SHIFT	2
> +#define OV13B10_DGTL_GAIN_M_MASK	0xff
> +#define OV13B10_DGTL_GAIN_H_SHIFT	10
> +#define OV13B10_DGTL_GAIN_H_MASK	0x3
> +
> +/* Test Pattern Control */
> +#define OV13B10_REG_TEST_PATTERN	0x5080
> +#define OV13B10_TEST_PATTERN_ENABLE	BIT(7)
> +#define OV13B10_TEST_PATTERN_MASK	0xf3
> +#define OV13B10_TEST_PATTERN_BAR_SHIFT	2
> +
> +/* Flip Control */
> +#define OV13B10_REG_FORMAT1		0x3820
> +#define OV13B10_REG_FORMAT2		0x3821
> +
> +/* Horizontal Window Offset */
> +#define OV13B10_REG_H_WIN_OFFSET	0x3811
> +
> +/* Vertical Window Offset */
> +#define OV13B10_REG_V_WIN_OFFSET	0x3813
> +
> +struct ov13b10_reg {
> +	u16 address;
> +	u8 val;
> +};
> +
> +struct ov13b10_reg_list {
> +	u32 num_of_regs;
> +	const struct ov13b10_reg *regs;
> +};
> +
> +/* Link frequency config */
> +struct ov13b10_link_freq_config {
> +	u32 pixels_per_line;
> +
> +	/* registers for this link frequency */
> +	struct ov13b10_reg_list reg_list;
> +};
> +
> +/* Mode : resolution and related config&values */
> +struct ov13b10_mode {
> +	/* Frame width */
> +	u32 width;
> +	/* Frame height */
> +	u32 height;
> +
> +	/* V-timing */
> +	u32 vts_def;
> +	u32 vts_min;
> +
> +	/* Index of Link frequency config to be used */
> +	u32 link_freq_index;
> +	/* Default register values */
> +	struct ov13b10_reg_list reg_list;
> +};
> +
> +/* 4208x3120 needs 1120Mbps/lane, 4 lanes */
> +static const struct ov13b10_reg mipi_data_rate_1120mbps[] = {
> +	{0x0103, 0x01},
> +	{0x0303, 0x04},
> +	{0x0305, 0xaf},
> +	{0x0321, 0x00},
> +	{0x0323, 0x04},
> +	{0x0324, 0x01},
> +	{0x0325, 0xa4},
> +	{0x0326, 0x81},
> +	{0x0327, 0x04},
> +	{0x3012, 0x07},
> +	{0x3013, 0x32},
> +	{0x3107, 0x23},
> +	{0x3501, 0x0c},
> +	{0x3502, 0x10},
> +	{0x3504, 0x08},
> +	{0x3508, 0x07},
> +	{0x3509, 0xc0},
> +	{0x3600, 0x16},
> +	{0x3601, 0x54},
> +	{0x3612, 0x4e},
> +	{0x3620, 0x00},
> +	{0x3621, 0x68},
> +	{0x3622, 0x66},
> +	{0x3623, 0x03},
> +	{0x3662, 0x92},
> +	{0x3666, 0xbb},
> +	{0x3667, 0x44},
> +	{0x366e, 0xff},
> +	{0x366f, 0xf3},
> +	{0x3675, 0x44},
> +	{0x3676, 0x00},
> +	{0x367f, 0xe9},
> +	{0x3681, 0x32},
> +	{0x3682, 0x1f},
> +	{0x3683, 0x0b},
> +	{0x3684, 0x0b},
> +	{0x3704, 0x0f},
> +	{0x3706, 0x40},
> +	{0x3708, 0x3b},
> +	{0x3709, 0x72},
> +	{0x370b, 0xa2},
> +	{0x3714, 0x24},
> +	{0x371a, 0x3e},
> +	{0x3725, 0x42},
> +	{0x3739, 0x12},
> +	{0x3767, 0x00},
> +	{0x377a, 0x0d},
> +	{0x3789, 0x18},
> +	{0x3790, 0x40},
> +	{0x3791, 0xa2},
> +	{0x37c2, 0x04},
> +	{0x37c3, 0xf1},
> +	{0x37d9, 0x0c},
> +	{0x37da, 0x02},
> +	{0x37dc, 0x02},
> +	{0x37e1, 0x04},
> +	{0x37e2, 0x0a},
> +	{0x3800, 0x00},
> +	{0x3801, 0x00},
> +	{0x3802, 0x00},
> +	{0x3803, 0x08},
> +	{0x3804, 0x10},
> +	{0x3805, 0x8f},
> +	{0x3806, 0x0c},
> +	{0x3807, 0x47},
> +	{0x3808, 0x10},
> +	{0x3809, 0x70},
> +	{0x380a, 0x0c},
> +	{0x380b, 0x30},
> +	{0x380c, 0x04},
> +	{0x380d, 0x98},
> +	{0x380e, 0x0c},
> +	{0x380f, 0x7c},
> +	{0x3811, 0x0f},
> +	{0x3813, 0x09},
> +	{0x3814, 0x01},
> +	{0x3815, 0x01},
> +	{0x3816, 0x01},
> +	{0x3817, 0x01},
> +	{0x381f, 0x08},
> +	{0x3820, 0x88},
> +	{0x3821, 0x00},
> +	{0x3822, 0x14},
> +	{0x382e, 0xe6},
> +	{0x3c80, 0x00},
> +	{0x3c87, 0x01},
> +	{0x3c8c, 0x19},
> +	{0x3c8d, 0x1c},
> +	{0x3ca0, 0x00},
> +	{0x3ca1, 0x00},
> +	{0x3ca2, 0x00},
> +	{0x3ca3, 0x00},
> +	{0x3ca4, 0x50},
> +	{0x3ca5, 0x11},
> +	{0x3ca6, 0x01},
> +	{0x3ca7, 0x00},
> +	{0x3ca8, 0x00},
> +	{0x4008, 0x02},
> +	{0x4009, 0x0f},
> +	{0x400a, 0x01},
> +	{0x400b, 0x19},
> +	{0x4011, 0x21},
> +	{0x4017, 0x08},
> +	{0x4019, 0x04},
> +	{0x401a, 0x58},
> +	{0x4032, 0x1e},
> +	{0x4050, 0x02},
> +	{0x4051, 0x09},
> +	{0x405e, 0x00},
> +	{0x4066, 0x02},
> +	{0x4501, 0x00},
> +	{0x4502, 0x10},
> +	{0x4505, 0x00},
> +	{0x4800, 0x64},
> +	{0x481b, 0x3e},
> +	{0x481f, 0x30},
> +	{0x4825, 0x34},
> +	{0x4837, 0x0e},
> +	{0x484b, 0x01},
> +	{0x4883, 0x02},
> +	{0x5000, 0xff},
> +	{0x5001, 0x0f},
> +	{0x5045, 0x20},
> +	{0x5046, 0x20},
> +	{0x5047, 0xa4},
> +	{0x5048, 0x20},
> +	{0x5049, 0xa4},
> +	{0x0100, 0x01},
> +};
> +
> +static const struct ov13b10_reg mode_4208x3120_regs[] = {
> +	{0x0305, 0xaf},
> +	{0x3501, 0x0c},
> +	{0x3662, 0x92},
> +	{0x3714, 0x24},
> +	{0x3739, 0x12},
> +	{0x37c2, 0x04},
> +	{0x37d9, 0x0c},
> +	{0x37e2, 0x0a},
> +	{0x3800, 0x00},
> +	{0x3801, 0x00},
> +	{0x3802, 0x00},
> +	{0x3803, 0x08},
> +	{0x3804, 0x10},
> +	{0x3805, 0x8f},
> +	{0x3806, 0x0c},
> +	{0x3807, 0x47},
> +	{0x3808, 0x10},
> +	{0x3809, 0x70},
> +	{0x380a, 0x0c},
> +	{0x380b, 0x30},
> +	{0x380c, 0x04},
> +	{0x380d, 0x98},
> +	{0x380e, 0x0c},
> +	{0x380f, 0x7c},
> +	{0x3810, 0x00},
> +	{0x3811, 0x0f},
> +	{0x3812, 0x00},
> +	{0x3813, 0x09},
> +	{0x3814, 0x01},
> +	{0x3816, 0x01},
> +	{0x3820, 0x88},
> +	{0x3c8c, 0x19},
> +	{0x4008, 0x02},
> +	{0x4009, 0x0f},
> +	{0x4050, 0x02},
> +	{0x4051, 0x09},
> +	{0x4501, 0x00},
> +	{0x4505, 0x00},
> +	{0x4837, 0x0e},
> +	{0x5000, 0xff},
> +	{0x5001, 0x0f},
> +};
> +
> +static const struct ov13b10_reg mode_4160x3120_regs[] = {
> +	{0x0305, 0xaf},
> +	{0x3501, 0x0c},
> +	{0x3662, 0x92},
> +	{0x3714, 0x24},
> +	{0x3739, 0x12},
> +	{0x37c2, 0x04},
> +	{0x37d9, 0x0c},
> +	{0x37e2, 0x0a},
> +	{0x3800, 0x00},
> +	{0x3801, 0x00},
> +	{0x3802, 0x00},
> +	{0x3803, 0x08},
> +	{0x3804, 0x10},
> +	{0x3805, 0x8f},
> +	{0x3806, 0x0c},
> +	{0x3807, 0x47},
> +	{0x3808, 0x10},
> +	{0x3809, 0x40},
> +	{0x380a, 0x0c},
> +	{0x380b, 0x30},
> +	{0x380c, 0x04},
> +	{0x380d, 0x98},
> +	{0x380e, 0x0c},
> +	{0x380f, 0x7c},
> +	{0x3810, 0x00},
> +	{0x3811, 0x27},
> +	{0x3812, 0x00},
> +	{0x3813, 0x09},
> +	{0x3814, 0x01},
> +	{0x3816, 0x01},
> +	{0x3820, 0x88},
> +	{0x3c8c, 0x19},
> +	{0x4008, 0x02},
> +	{0x4009, 0x0f},
> +	{0x4050, 0x02},
> +	{0x4051, 0x09},
> +	{0x4501, 0x00},
> +	{0x4505, 0x00},
> +	{0x4837, 0x0e},
> +	{0x5000, 0xff},
> +	{0x5001, 0x0f},
> +};
> +
> +static const struct ov13b10_reg mode_4160x2340_regs[] = {
> +	{0x0305, 0xaf},
> +	{0x3501, 0x0c},
> +	{0x3662, 0x92},
> +	{0x3714, 0x24},
> +	{0x3739, 0x12},
> +	{0x37c2, 0x04},
> +	{0x37d9, 0x0c},
> +	{0x37e2, 0x0a},
> +	{0x3800, 0x00},
> +	{0x3801, 0x00},
> +	{0x3802, 0x00},
> +	{0x3803, 0x08},
> +	{0x3804, 0x10},
> +	{0x3805, 0x8f},
> +	{0x3806, 0x0c},
> +	{0x3807, 0x47},
> +	{0x3808, 0x10},
> +	{0x3809, 0x40},
> +	{0x380a, 0x09},
> +	{0x380b, 0x24},
> +	{0x380c, 0x04},
> +	{0x380d, 0x98},
> +	{0x380e, 0x0c},
> +	{0x380f, 0x7c},
> +	{0x3810, 0x00},
> +	{0x3811, 0x27},
> +	{0x3812, 0x01},
> +	{0x3813, 0x8f},
> +	{0x3814, 0x01},
> +	{0x3816, 0x01},
> +	{0x3820, 0x88},
> +	{0x3c8c, 0x19},
> +	{0x4008, 0x02},
> +	{0x4009, 0x0f},
> +	{0x4050, 0x02},
> +	{0x4051, 0x09},
> +	{0x4501, 0x00},
> +	{0x4505, 0x00},
> +	{0x4837, 0x0e},
> +	{0x5000, 0xff},
> +	{0x5001, 0x0f},
> +};
> +
> +static const struct ov13b10_reg mode_2104x1560_regs[] = {
> +	{0x0305, 0xaf},
> +	{0x3501, 0x06},
> +	{0x3662, 0x88},
> +	{0x3714, 0x28},
> +	{0x3739, 0x10},
> +	{0x37c2, 0x14},
> +	{0x37d9, 0x06},
> +	{0x37e2, 0x0c},
> +	{0x3800, 0x00},
> +	{0x3801, 0x00},
> +	{0x3802, 0x00},
> +	{0x3803, 0x08},
> +	{0x3804, 0x10},
> +	{0x3805, 0x8f},
> +	{0x3806, 0x0c},
> +	{0x3807, 0x47},
> +	{0x3808, 0x08},
> +	{0x3809, 0x38},
> +	{0x380a, 0x06},
> +	{0x380b, 0x18},
> +	{0x380c, 0x04},
> +	{0x380d, 0x98},
> +	{0x380e, 0x06},
> +	{0x380f, 0x3e},
> +	{0x3810, 0x00},
> +	{0x3811, 0x07},
> +	{0x3812, 0x00},
> +	{0x3813, 0x05},
> +	{0x3814, 0x03},
> +	{0x3816, 0x03},
> +	{0x3820, 0x8b},
> +	{0x3c8c, 0x18},
> +	{0x4008, 0x00},
> +	{0x4009, 0x05},
> +	{0x4050, 0x00},
> +	{0x4051, 0x05},
> +	{0x4501, 0x08},
> +	{0x4505, 0x00},
> +	{0x4837, 0x0e},
> +	{0x5000, 0xfd},
> +	{0x5001, 0x0d},
> +};
> +
> +static const struct ov13b10_reg mode_2080x1170_regs[] = {
> +	{0x0305, 0xaf},
> +	{0x3501, 0x06},
> +	{0x3662, 0x88},
> +	{0x3714, 0x28},
> +	{0x3739, 0x10},
> +	{0x37c2, 0x14},
> +	{0x37d9, 0x06},
> +	{0x37e2, 0x0c},
> +	{0x3800, 0x00},
> +	{0x3801, 0x00},
> +	{0x3802, 0x00},
> +	{0x3803, 0x08},
> +	{0x3804, 0x10},
> +	{0x3805, 0x8f},
> +	{0x3806, 0x0c},
> +	{0x3807, 0x47},
> +	{0x3808, 0x08},
> +	{0x3809, 0x20},
> +	{0x380a, 0x04},
> +	{0x380b, 0x92},
> +	{0x380c, 0x04},
> +	{0x380d, 0x98},
> +	{0x380e, 0x06},
> +	{0x380f, 0x3e},
> +	{0x3810, 0x00},
> +	{0x3811, 0x13},
> +	{0x3812, 0x00},
> +	{0x3813, 0xc9},
> +	{0x3814, 0x03},
> +	{0x3816, 0x03},
> +	{0x3820, 0x8b},
> +	{0x3c8c, 0x18},
> +	{0x4008, 0x00},
> +	{0x4009, 0x05},
> +	{0x4050, 0x00},
> +	{0x4051, 0x05},
> +	{0x4501, 0x08},
> +	{0x4505, 0x00},
> +	{0x4837, 0x0e},
> +	{0x5000, 0xfd},
> +	{0x5001, 0x0d},
> +};
> +
> +static const char * const ov13b10_test_pattern_menu[] = {
> +	"Disabled",
> +	"Vertical Color Bar Type 1",
> +	"Vertical Color Bar Type 2",
> +	"Vertical Color Bar Type 3",
> +	"Vertical Color Bar Type 4"
> +};
> +
> +/* Configurations for supported link frequencies */
> +#define OV13B10_NUM_OF_LINK_FREQS	1
> +#define OV13B10_LINK_FREQ_560MHZ	560000000ULL
> +#define OV13B10_LINK_FREQ_INDEX_0	0
> +
> +/*
> + * pixel_rate = link_freq * data-rate * nr_of_lanes / bits_per_sample
> + * data rate => double data rate; number of lanes => 4; bits per pixel => 10
> + */
> +static u64 link_freq_to_pixel_rate(u64 f)
> +{
> +	f *= 2 * 4;
> +	do_div(f, 10);
> +
> +	return f;
> +}
> +
> +/* Menu items for LINK_FREQ V4L2 control */
> +static const s64 link_freq_menu_items[OV13B10_NUM_OF_LINK_FREQS] = {
> +	OV13B10_LINK_FREQ_560MHZ
> +};
> +
> +/* Link frequency configs */
> +static const struct ov13b10_link_freq_config
> +			link_freq_configs[OV13B10_NUM_OF_LINK_FREQS] = {
> +	{
> +		.pixels_per_line = OV13B10_PPL_560MHZ,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mipi_data_rate_1120mbps),
> +			.regs = mipi_data_rate_1120mbps,
> +		}
> +	}
> +};
> +
> +/* Mode configs */
> +static const struct ov13b10_mode supported_modes[] = {
> +	{
> +		.width = 4208,
> +		.height = 3120,
> +		.vts_def = OV13B10_VTS_30FPS,
> +		.vts_min = OV13B10_VTS_30FPS,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mode_4208x3120_regs),
> +			.regs = mode_4208x3120_regs,
> +		},
> +		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
> +	},
> +	{
> +		.width = 4160,
> +		.height = 3120,
> +		.vts_def = OV13B10_VTS_30FPS,
> +		.vts_min = OV13B10_VTS_30FPS,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mode_4160x3120_regs),
> +			.regs = mode_4160x3120_regs,
> +		},
> +		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
> +	},
> +	{
> +		.width = 4160,
> +		.height = 2340,
> +		.vts_def = OV13B10_VTS_30FPS,
> +		.vts_min = OV13B10_VTS_30FPS,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mode_4160x2340_regs),
> +			.regs = mode_4160x2340_regs,
> +		},
> +		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
> +	},
> +	{
> +		.width = 2104,
> +		.height = 1560,
> +		.vts_def = OV13B10_VTS_60FPS,
> +		.vts_min = OV13B10_VTS_60FPS,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mode_2104x1560_regs),
> +			.regs = mode_2104x1560_regs,
> +		},
> +		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
> +	},
> +		{
> +		.width = 2080,
> +		.height = 1170,
> +		.vts_def = OV13B10_VTS_60FPS,
> +		.vts_min = OV13B10_VTS_60FPS,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mode_2080x1170_regs),
> +			.regs = mode_2080x1170_regs,
> +		},
> +		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
> +	}
> +};
> +
> +struct ov13b10 {
> +	struct v4l2_subdev sd;
> +	struct media_pad pad;
> +
> +	struct v4l2_ctrl_handler ctrl_handler;
> +	/* V4L2 Controls */
> +	struct v4l2_ctrl *link_freq;
> +	struct v4l2_ctrl *pixel_rate;
> +	struct v4l2_ctrl *vblank;
> +	struct v4l2_ctrl *hblank;
> +	struct v4l2_ctrl *exposure;
> +
> +	/* Current mode */
> +	const struct ov13b10_mode *cur_mode;
> +
> +	/* Mutex for serialized access */
> +	struct mutex mutex;
> +
> +	/* Streaming on/off */
> +	bool streaming;
> +};
> +
> +#define to_ov13b10(_sd)	container_of(_sd, struct ov13b10, sd)
> +
> +/* Read registers up to 4 at a time */
> +static int ov13b10_read_reg(struct ov13b10 *ov13b,
> +			    u16 reg, u32 len, u32 *val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
> +	struct i2c_msg msgs[2];
> +	u8 *data_be_p;
> +	int ret;
> +	__be32 data_be = 0;
> +	__be16 reg_addr_be = cpu_to_be16(reg);
> +
> +	if (len > 4)
> +		return -EINVAL;
> +
> +	data_be_p = (u8 *)&data_be;
> +	/* Write register address */
> +	msgs[0].addr = client->addr;
> +	msgs[0].flags = 0;
> +	msgs[0].len = 2;
> +	msgs[0].buf = (u8 *)&reg_addr_be;
> +
> +	/* Read data from register */
> +	msgs[1].addr = client->addr;
> +	msgs[1].flags = I2C_M_RD;
> +	msgs[1].len = len;
> +	msgs[1].buf = &data_be_p[4 - len];
> +
> +	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
> +	if (ret != ARRAY_SIZE(msgs))
> +		return -EIO;
> +
> +	*val = be32_to_cpu(data_be);
> +
> +	return 0;
> +}
> +
> +/* Write registers up to 4 at a time */
> +static int ov13b10_write_reg(struct ov13b10 *ov13b,
> +			     u16 reg, u32 len, u32 __val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
> +	int buf_i, val_i;
> +	u8 buf[6], *val_p;
> +	__be32 val;
> +
> +	if (len > 4)
> +		return -EINVAL;
> +
> +	buf[0] = reg >> 8;
> +	buf[1] = reg & 0xff;
> +
> +	val = cpu_to_be32(__val);
> +	val_p = (u8 *)&val;
> +	buf_i = 2;
> +	val_i = 4 - len;
> +
> +	while (val_i < 4)
> +		buf[buf_i++] = val_p[val_i++];
> +
> +	if (i2c_master_send(client, buf, len + 2) != len + 2)
> +		return -EIO;
> +
> +	return 0;
> +}
> +
> +/* Write a list of registers */
> +static int ov13b10_write_regs(struct ov13b10 *ov13b,
> +			      const struct ov13b10_reg *regs, u32 len)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
> +	int ret;
> +	u32 i;
> +
> +	for (i = 0; i < len; i++) {
> +		ret = ov13b10_write_reg(ov13b, regs[i].address, 1,
> +					regs[i].val);
> +		if (ret) {
> +			dev_err_ratelimited(
> +				&client->dev,
> +				"Failed to write reg 0x%4.4x. error = %d\n",
> +				regs[i].address, ret);
> +
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int ov13b10_write_reg_list(struct ov13b10 *ov13b,
> +				  const struct ov13b10_reg_list *r_list)
> +{
> +	return ov13b10_write_regs(ov13b, r_list->regs, r_list->num_of_regs);
> +}
> +
> +/* Open sub-device */
> +static int ov13b10_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> +{
> +	struct ov13b10 *ov13b = to_ov13b10(sd);
> +	struct v4l2_mbus_framefmt *try_fmt = v4l2_subdev_get_try_format(sd,
> +									fh->state,
> +									0);
> +
> +	mutex_lock(&ov13b->mutex);
> +
> +	/* Initialize try_fmt */
> +	try_fmt->width = ov13b->cur_mode->width;
> +	try_fmt->height = ov13b->cur_mode->height;

These should be the defaults for the driver, not reflect the current
configuration (apart from the pixel order at least).

Does v/hflip change the pixel order with this driver btw.?

> +	try_fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +	try_fmt->field = V4L2_FIELD_NONE;
> +
> +	/* No crop or compose */
> +	mutex_unlock(&ov13b->mutex);
> +
> +	return 0;
> +}
> +
> +static int ov13b10_update_digital_gain(struct ov13b10 *ov13b, u32 d_gain)
> +{
> +	int ret;
> +	u32 val;
> +
> +	/*
> +	 * 0x350C[7:6], 0x350B[7:0], 0x350A[1:0]
> +	 */
> +
> +	val = (d_gain & OV13B10_DGTL_GAIN_L_MASK) << OV13B10_DGTL_GAIN_L_SHIFT;
> +	ret = ov13b10_write_reg(ov13b, OV13B10_REG_DGTL_GAIN_L,
> +				OV13B10_REG_VALUE_08BIT, val);
> +	if (ret)
> +		return ret;
> +
> +	val = (d_gain >> OV13B10_DGTL_GAIN_M_SHIFT) & OV13B10_DGTL_GAIN_M_MASK;
> +	ret = ov13b10_write_reg(ov13b, OV13B10_REG_DGTL_GAIN_M,
> +				OV13B10_REG_VALUE_08BIT, val);
> +	if (ret)
> +		return ret;
> +
> +	val = (d_gain >> OV13B10_DGTL_GAIN_H_SHIFT) & OV13B10_DGTL_GAIN_H_MASK;
> +	ret = ov13b10_write_reg(ov13b, OV13B10_REG_DGTL_GAIN_H,
> +				OV13B10_REG_VALUE_08BIT, val);
> +
> +	return ret;
> +}
> +
> +static int ov13b10_enable_test_pattern(struct ov13b10 *ov13b, u32 pattern)
> +{
> +	int ret;
> +	u32 val;
> +
> +	ret = ov13b10_read_reg(ov13b, OV13B10_REG_TEST_PATTERN,
> +			       OV13B10_REG_VALUE_08BIT, &val);
> +	if (ret)
> +		return ret;
> +
> +	if (pattern) {
> +		val &= OV13B10_TEST_PATTERN_MASK;
> +		val |= ((pattern - 1) << OV13B10_TEST_PATTERN_BAR_SHIFT) |
> +		     OV13B10_TEST_PATTERN_ENABLE;
> +	} else {
> +		val &= ~OV13B10_TEST_PATTERN_ENABLE;
> +	}
> +
> +	return ov13b10_write_reg(ov13b, OV13B10_REG_TEST_PATTERN,
> +				 OV13B10_REG_VALUE_08BIT, val);
> +}
> +
> +static int ov13b10_set_ctrl_hflip(struct ov13b10 *ov13b, u32 ctrl_val)
> +{
> +	int ret;
> +	u32 val;
> +
> +	ret = ov13b10_read_reg(ov13b, OV13B10_REG_FORMAT1,
> +			       OV13B10_REG_VALUE_08BIT, &val);
> +	if (ret)
> +		return ret;
> +
> +	ret = ov13b10_write_reg(ov13b, OV13B10_REG_FORMAT1,
> +				OV13B10_REG_VALUE_08BIT,
> +				ctrl_val ? val & ~BIT(3) : val);
> +
> +	if (ret)
> +		return ret;
> +
> +	ret = ov13b10_read_reg(ov13b, OV13B10_REG_H_WIN_OFFSET,
> +			       OV13B10_REG_VALUE_08BIT, &val);
> +	if (ret)
> +		return ret;
> +
> +	return ov13b10_write_reg(ov13b, OV13B10_REG_H_WIN_OFFSET,
> +				 OV13B10_REG_VALUE_08BIT,
> +				 ctrl_val ? ++val : val);
> +}
> +
> +static int ov13b10_set_ctrl_vflip(struct ov13b10 *ov13b, u32 ctrl_val)
> +{
> +	int ret;
> +	u32 val;
> +
> +	ret = ov13b10_read_reg(ov13b, OV13B10_REG_FORMAT1,
> +			       OV13B10_REG_VALUE_08BIT, &val);
> +	if (ret)
> +		return ret;
> +
> +	ret = ov13b10_write_reg(ov13b, OV13B10_REG_FORMAT1,
> +				OV13B10_REG_VALUE_08BIT,
> +				ctrl_val ? val | BIT(4) | BIT(5)  : val);
> +
> +	if (ret)
> +		return ret;
> +
> +	ret = ov13b10_read_reg(ov13b, OV13B10_REG_V_WIN_OFFSET,
> +			       OV13B10_REG_VALUE_08BIT, &val);
> +	if (ret)
> +		return ret;
> +
> +	return ov13b10_write_reg(ov13b, OV13B10_REG_V_WIN_OFFSET,
> +				 OV13B10_REG_VALUE_08BIT,
> +				 ctrl_val ? --val : val);
> +}
> +
> +static int ov13b10_set_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct ov13b10 *ov13b = container_of(ctrl->handler,
> +					     struct ov13b10, ctrl_handler);
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
> +	s64 max;
> +	int ret;
> +
> +	/* Propagate change of current control to all related controls */
> +	switch (ctrl->id) {
> +	case V4L2_CID_VBLANK:
> +		/* Update max exposure while meeting expected vblanking */
> +		max = ov13b->cur_mode->height + ctrl->val - 8;
> +		__v4l2_ctrl_modify_range(ov13b->exposure,
> +					 ov13b->exposure->minimum,
> +					 max, ov13b->exposure->step, max);
> +		break;
> +	}
> +
> +	/*
> +	 * Applying V4L2 control value only happens
> +	 * when power is up for streaming
> +	 */
> +	if (!pm_runtime_get_if_in_use(&client->dev))
> +		return 0;
> +
> +	ret = 0;
> +	switch (ctrl->id) {
> +	case V4L2_CID_ANALOGUE_GAIN:
> +		ret = ov13b10_write_reg(ov13b, OV13B10_REG_ANALOG_GAIN,
> +					OV13B10_REG_VALUE_16BIT,
> +					ctrl->val << 1);
> +		break;
> +	case V4L2_CID_DIGITAL_GAIN:
> +		ret = ov13b10_update_digital_gain(ov13b, ctrl->val);
> +		break;
> +	case V4L2_CID_EXPOSURE:
> +		ret = ov13b10_write_reg(ov13b, OV13B10_REG_EXPOSURE,
> +					OV13B10_REG_VALUE_24BIT,
> +					ctrl->val);
> +		break;
> +	case V4L2_CID_VBLANK:
> +		ret = ov13b10_write_reg(ov13b, OV13B10_REG_VTS,
> +					OV13B10_REG_VALUE_16BIT,
> +					ov13b->cur_mode->height
> +					  + ctrl->val);

Fits on previous line.

> +		break;
> +	case V4L2_CID_TEST_PATTERN:
> +		ret = ov13b10_enable_test_pattern(ov13b, ctrl->val);
> +		break;
> +	case V4L2_CID_HFLIP:
> +		ov13b10_set_ctrl_hflip(ov13b, ctrl->val);
> +		break;
> +	case V4L2_CID_VFLIP:
> +		ov13b10_set_ctrl_vflip(ov13b, ctrl->val);
> +		break;
> +	default:
> +		dev_info(&client->dev,
> +			 "ctrl(id:0x%x,val:0x%x) is not handled\n",
> +			 ctrl->id, ctrl->val);
> +		break;
> +	}
> +
> +	pm_runtime_put(&client->dev);
> +
> +	return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops ov13b10_ctrl_ops = {
> +	.s_ctrl = ov13b10_set_ctrl,
> +};
> +
> +static int ov13b10_enum_mbus_code(struct v4l2_subdev *sd,
> +				  struct v4l2_subdev_state *sd_state,
> +				  struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	/* Only one bayer order(GRBG) is supported */
> +	if (code->index > 0)
> +		return -EINVAL;
> +
> +	code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +
> +	return 0;
> +}
> +
> +static int ov13b10_enum_frame_size(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_state *sd_state,
> +				   struct v4l2_subdev_frame_size_enum *fse)
> +{
> +	if (fse->index >= ARRAY_SIZE(supported_modes))
> +		return -EINVAL;
> +
> +	if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
> +		return -EINVAL;
> +
> +	fse->min_width = supported_modes[fse->index].width;
> +	fse->max_width = fse->min_width;
> +	fse->min_height = supported_modes[fse->index].height;
> +	fse->max_height = fse->min_height;
> +
> +	return 0;
> +}
> +
> +static void ov13b10_update_pad_format(const struct ov13b10_mode *mode,
> +				      struct v4l2_subdev_format *fmt)
> +{
> +	fmt->format.width = mode->width;
> +	fmt->format.height = mode->height;
> +	fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +	fmt->format.field = V4L2_FIELD_NONE;
> +}
> +
> +static int ov13b10_do_get_pad_format(struct ov13b10 *ov13b,
> +				     struct v4l2_subdev_state *sd_state,
> +				     struct v4l2_subdev_format *fmt)
> +{
> +	struct v4l2_mbus_framefmt *framefmt;
> +	struct v4l2_subdev *sd = &ov13b->sd;
> +
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> +		framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> +		fmt->format = *framefmt;
> +	} else {
> +		ov13b10_update_pad_format(ov13b->cur_mode, fmt);
> +	}
> +
> +	return 0;
> +}
> +
> +static int ov13b10_get_pad_format(struct v4l2_subdev *sd,
> +				  struct v4l2_subdev_state *sd_state,
> +				  struct v4l2_subdev_format *fmt)
> +{
> +	struct ov13b10 *ov13b = to_ov13b10(sd);
> +	int ret;
> +
> +	mutex_lock(&ov13b->mutex);
> +	ret = ov13b10_do_get_pad_format(ov13b, sd_state, fmt);
> +	mutex_unlock(&ov13b->mutex);
> +
> +	return ret;
> +}
> +
> +static int
> +ov13b10_set_pad_format(struct v4l2_subdev *sd,
> +		       struct v4l2_subdev_state *sd_state,
> +		       struct v4l2_subdev_format *fmt)
> +{
> +	struct ov13b10 *ov13b = to_ov13b10(sd);
> +	const struct ov13b10_mode *mode;
> +	struct v4l2_mbus_framefmt *framefmt;
> +	s32 vblank_def;
> +	s32 vblank_min;
> +	s64 h_blank;
> +	s64 pixel_rate;
> +	s64 link_freq;
> +
> +	mutex_lock(&ov13b->mutex);
> +
> +	/* Only one raw bayer(GRBG) order is supported */
> +	if (fmt->format.code != MEDIA_BUS_FMT_SGRBG10_1X10)
> +		fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +
> +	mode = v4l2_find_nearest_size(supported_modes,
> +				      ARRAY_SIZE(supported_modes),
> +				      width, height,
> +				      fmt->format.width, fmt->format.height);
> +	ov13b10_update_pad_format(mode, fmt);
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> +		framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> +		*framefmt = fmt->format;
> +	} else {
> +		ov13b->cur_mode = mode;
> +		__v4l2_ctrl_s_ctrl(ov13b->link_freq, mode->link_freq_index);
> +		link_freq = link_freq_menu_items[mode->link_freq_index];
> +		pixel_rate = link_freq_to_pixel_rate(link_freq);
> +		__v4l2_ctrl_s_ctrl_int64(ov13b->pixel_rate, pixel_rate);
> +
> +		/* Update limits and set FPS to default */
> +		vblank_def = ov13b->cur_mode->vts_def -
> +			     ov13b->cur_mode->height;
> +		vblank_min = ov13b->cur_mode->vts_min -
> +			     ov13b->cur_mode->height;
> +		__v4l2_ctrl_modify_range(

Could you still run this through scripts/checkpatch.pl? In particular,
lines shouldn't end in an opening parenthesis.

There are also lines over 80 chars for no apparent reason.

> +			ov13b->vblank, vblank_min,
> +			OV13B10_VTS_MAX - ov13b->cur_mode->height, 1,
> +			vblank_def);
> +		__v4l2_ctrl_s_ctrl(ov13b->vblank, vblank_def);
> +		h_blank =
> +			link_freq_configs[mode->link_freq_index].pixels_per_line
> +			 - ov13b->cur_mode->width;
> +		__v4l2_ctrl_modify_range(ov13b->hblank, h_blank,
> +					 h_blank, 1, h_blank);
> +	}
> +
> +	mutex_unlock(&ov13b->mutex);
> +
> +	return 0;
> +}
> +
> +static int ov13b10_start_streaming(struct ov13b10 *ov13b)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
> +	const struct ov13b10_reg_list *reg_list;
> +	int ret, link_freq_index;
> +
> +	/* Get out of from software reset */
> +	ret = ov13b10_write_reg(ov13b, OV13B10_REG_SOFTWARE_RST,
> +				OV13B10_REG_VALUE_08BIT, OV13B10_SOFTWARE_RST);
> +	if (ret) {
> +		dev_err(&client->dev, "%s failed to set powerup registers\n",
> +			__func__);
> +		return ret;
> +	}
> +
> +	link_freq_index = ov13b->cur_mode->link_freq_index;
> +	reg_list = &link_freq_configs[link_freq_index].reg_list;
> +	ret = ov13b10_write_reg_list(ov13b, reg_list);
> +	if (ret) {
> +		dev_err(&client->dev, "%s failed to set plls\n", __func__);
> +		return ret;
> +	}
> +
> +	/* Apply default values of current mode */
> +	reg_list = &ov13b->cur_mode->reg_list;
> +	ret = ov13b10_write_reg_list(ov13b, reg_list);
> +	if (ret) {
> +		dev_err(&client->dev, "%s failed to set mode\n", __func__);
> +		return ret;
> +	}
> +
> +	/* Apply customized values from user */
> +	ret =  __v4l2_ctrl_handler_setup(ov13b->sd.ctrl_handler);
> +	if (ret)
> +		return ret;
> +
> +	return ov13b10_write_reg(ov13b, OV13B10_REG_MODE_SELECT,
> +				 OV13B10_REG_VALUE_08BIT,
> +				 OV13B10_MODE_STREAMING);
> +}
> +
> +/* Stop streaming */
> +static int ov13b10_stop_streaming(struct ov13b10 *ov13b)
> +{
> +	return ov13b10_write_reg(ov13b, OV13B10_REG_MODE_SELECT,
> +				 OV13B10_REG_VALUE_08BIT, OV13B10_MODE_STANDBY);
> +}
> +
> +static int ov13b10_set_stream(struct v4l2_subdev *sd, int enable)
> +{
> +	struct ov13b10 *ov13b = to_ov13b10(sd);
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	int ret = 0;
> +
> +	mutex_lock(&ov13b->mutex);
> +	if (ov13b->streaming == enable) {
> +		mutex_unlock(&ov13b->mutex);
> +		return 0;
> +	}
> +
> +	if (enable) {
> +		ret = pm_runtime_resume_and_get(&client->dev);
> +		if (ret < 0)
> +			goto err_unlock;
> +
> +		/*
> +		 * Apply default & customized values
> +		 * and then start streaming.
> +		 */
> +		ret = ov13b10_start_streaming(ov13b);
> +		if (ret)
> +			goto err_rpm_put;
> +	} else {
> +		ov13b10_stop_streaming(ov13b);
> +		pm_runtime_put(&client->dev);
> +	}
> +
> +	ov13b->streaming = enable;
> +	mutex_unlock(&ov13b->mutex);
> +
> +	return ret;
> +
> +err_rpm_put:
> +	pm_runtime_put(&client->dev);
> +err_unlock:
> +	mutex_unlock(&ov13b->mutex);
> +
> +	return ret;
> +}
> +
> +static int __maybe_unused ov13b10_suspend(struct device *dev)
> +{
> +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct ov13b10 *ov13b = to_ov13b10(sd);
> +
> +	if (ov13b->streaming)
> +		ov13b10_stop_streaming(ov13b);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused ov13b10_resume(struct device *dev)
> +{
> +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct ov13b10 *ov13b = to_ov13b10(sd);
> +	int ret;
> +
> +	if (ov13b->streaming) {
> +		ret = ov13b10_start_streaming(ov13b);
> +		if (ret)
> +			goto error;
> +	}
> +
> +	return 0;
> +
> +error:
> +	ov13b10_stop_streaming(ov13b);
> +	ov13b->streaming = false;
> +	return ret;
> +}
> +
> +/* Verify chip ID */
> +static int ov13b10_identify_module(struct ov13b10 *ov13b)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
> +	int ret;
> +	u32 val;
> +
> +	ret = ov13b10_read_reg(ov13b, OV13B10_REG_CHIP_ID,
> +			       OV13B10_REG_VALUE_24BIT, &val);
> +	if (ret)
> +		return ret;
> +
> +	if (val != OV13B10_CHIP_ID) {
> +		dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
> +			OV13B10_CHIP_ID, val);
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_video_ops ov13b10_video_ops = {
> +	.s_stream = ov13b10_set_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops ov13b10_pad_ops = {
> +	.enum_mbus_code = ov13b10_enum_mbus_code,
> +	.get_fmt = ov13b10_get_pad_format,
> +	.set_fmt = ov13b10_set_pad_format,
> +	.enum_frame_size = ov13b10_enum_frame_size,
> +};
> +
> +static const struct v4l2_subdev_ops ov13b10_subdev_ops = {
> +	.video = &ov13b10_video_ops,
> +	.pad = &ov13b10_pad_ops,
> +};
> +
> +static const struct media_entity_operations ov13b10_subdev_entity_ops = {
> +	.link_validate = v4l2_subdev_link_validate,
> +};
> +
> +static const struct v4l2_subdev_internal_ops ov13b10_internal_ops = {
> +	.open = ov13b10_open,
> +};
> +
> +/* Initialize control handlers */
> +static int ov13b10_init_controls(struct ov13b10 *ov13b)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
> +	struct v4l2_fwnode_device_properties props;
> +	struct v4l2_ctrl_handler *ctrl_hdlr;
> +	s64 exposure_max;
> +	s64 vblank_def;
> +	s64 vblank_min;
> +	s64 hblank;
> +	s64 pixel_rate_min;
> +	s64 pixel_rate_max;
> +	const struct ov13b10_mode *mode;
> +	int ret;
> +
> +	ctrl_hdlr = &ov13b->ctrl_handler;
> +	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10);
> +	if (ret)
> +		return ret;
> +
> +	mutex_init(&ov13b->mutex);
> +	ctrl_hdlr->lock = &ov13b->mutex;
> +	ov13b->link_freq = v4l2_ctrl_new_int_menu(
> +				ctrl_hdlr,
> +				&ov13b10_ctrl_ops,
> +				V4L2_CID_LINK_FREQ,
> +				OV13B10_NUM_OF_LINK_FREQS - 1,
> +				0,
> +				link_freq_menu_items);
> +	if (ov13b->link_freq)
> +		ov13b->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]);
> +	pixel_rate_min = 0;
> +	/* By default, PIXEL_RATE is read only */
> +	ov13b->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops,
> +					      V4L2_CID_PIXEL_RATE,
> +					      pixel_rate_min, pixel_rate_max,
> +					      1, pixel_rate_max);
> +
> +	mode = ov13b->cur_mode;
> +	vblank_def = mode->vts_def - mode->height;
> +	vblank_min = mode->vts_min - mode->height;
> +	ov13b->vblank = v4l2_ctrl_new_std(
> +				ctrl_hdlr, &ov13b10_ctrl_ops, V4L2_CID_VBLANK,
> +				vblank_min, OV13B10_VTS_MAX - mode->height, 1,
> +				vblank_def);
> +
> +	hblank = link_freq_configs[mode->link_freq_index].pixels_per_line -
> +		 mode->width;
> +	ov13b->hblank = v4l2_ctrl_new_std(
> +				ctrl_hdlr, &ov13b10_ctrl_ops, V4L2_CID_HBLANK,
> +				hblank, hblank, 1, hblank);
> +	if (ov13b->hblank)
> +		ov13b->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	exposure_max = mode->vts_def - 8;
> +	ov13b->exposure = v4l2_ctrl_new_std(
> +				ctrl_hdlr, &ov13b10_ctrl_ops,
> +				V4L2_CID_EXPOSURE, OV13B10_EXPOSURE_MIN,
> +				exposure_max, OV13B10_EXPOSURE_STEP,
> +				exposure_max);
> +
> +	v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
> +			  OV13B10_ANA_GAIN_MIN, OV13B10_ANA_GAIN_MAX,
> +			  OV13B10_ANA_GAIN_STEP, OV13B10_ANA_GAIN_DEFAULT);
> +
> +	/* Digital gain */
> +	v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
> +			  OV13B10_DGTL_GAIN_MIN, OV13B10_DGTL_GAIN_MAX,
> +			  OV13B10_DGTL_GAIN_STEP, OV13B10_DGTL_GAIN_DEFAULT);
> +
> +	v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &ov13b10_ctrl_ops,
> +				     V4L2_CID_TEST_PATTERN,
> +				     ARRAY_SIZE(ov13b10_test_pattern_menu) - 1,
> +				     0, 0, ov13b10_test_pattern_menu);
> +
> +	v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops,
> +			  V4L2_CID_HFLIP, 0, 1, 1, 0);
> +	v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops,
> +			  V4L2_CID_VFLIP, 0, 1, 1, 0);
> +
> +	if (ctrl_hdlr->error) {
> +		ret = ctrl_hdlr->error;
> +		dev_err(&client->dev, "%s control init failed (%d)\n",
> +			__func__, ret);
> +		goto error;
> +	}
> +
> +	ret = v4l2_fwnode_device_parse(&client->dev, &props);
> +	if (ret)
> +		goto error;
> +
> +	ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &ov13b10_ctrl_ops,
> +					      &props);
> +	if (ret)
> +		goto error;
> +
> +	ov13b->sd.ctrl_handler = ctrl_hdlr;
> +
> +	return 0;
> +
> +error:
> +	v4l2_ctrl_handler_free(ctrl_hdlr);
> +	mutex_destroy(&ov13b->mutex);
> +
> +	return ret;
> +}
> +
> +static void ov13b10_free_controls(struct ov13b10 *ov13b)
> +{
> +	v4l2_ctrl_handler_free(ov13b->sd.ctrl_handler);
> +	mutex_destroy(&ov13b->mutex);
> +}
> +
> +static int ov13b10_probe(struct i2c_client *client)
> +{
> +	struct ov13b10 *ov13b;
> +	int ret;
> +	u32 val = 0;
> +
> +	device_property_read_u32(&client->dev, "clock-frequency", &val);
> +	if (val != 19200000)
> +		return -EINVAL;
> +
> +	ov13b = devm_kzalloc(&client->dev, sizeof(*ov13b), GFP_KERNEL);
> +	if (!ov13b)
> +		return -ENOMEM;
> +
> +	/* Initialize subdev */
> +	v4l2_i2c_subdev_init(&ov13b->sd, client, &ov13b10_subdev_ops);
> +
> +	/* Check module identity */
> +	ret = ov13b10_identify_module(ov13b);
> +	if (ret) {
> +		dev_err(&client->dev, "failed to find sensor: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* Set default mode to max resolution */
> +	ov13b->cur_mode = &supported_modes[0];
> +
> +	ret = ov13b10_init_controls(ov13b);
> +	if (ret)
> +		return ret;
> +
> +	/* Initialize subdev */
> +	ov13b->sd.internal_ops = &ov13b10_internal_ops;
> +	ov13b->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	ov13b->sd.entity.ops = &ov13b10_subdev_entity_ops;
> +	ov13b->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +
> +	/* Initialize source pad */
> +	ov13b->pad.flags = MEDIA_PAD_FL_SOURCE;
> +	ret = media_entity_pads_init(&ov13b->sd.entity, 1, &ov13b->pad);
> +	if (ret) {
> +		dev_err(&client->dev, "%s failed:%d\n", __func__, ret);
> +		goto error_handler_free;
> +	}
> +
> +	ret = v4l2_async_register_subdev_sensor(&ov13b->sd);
> +	if (ret < 0)
> +		goto error_media_entity;
> +
> +	/*
> +	 * Device is already turned on by i2c-core with ACPI domain PM.
> +	 * Enable runtime PM and turn off the device.
> +	 */
> +	pm_runtime_set_active(&client->dev);
> +	pm_runtime_enable(&client->dev);
> +	pm_runtime_idle(&client->dev);
> +
> +	return 0;
> +
> +error_media_entity:
> +	media_entity_cleanup(&ov13b->sd.entity);
> +
> +error_handler_free:
> +	ov13b10_free_controls(ov13b);
> +	dev_err(&client->dev, "%s failed:%d\n", __func__, ret);
> +
> +	return ret;
> +}
> +
> +static int ov13b10_remove(struct i2c_client *client)
> +{
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct ov13b10 *ov13b = to_ov13b10(sd);
> +
> +	v4l2_async_unregister_subdev(sd);
> +	media_entity_cleanup(&sd->entity);
> +	ov13b10_free_controls(ov13b);
> +
> +	pm_runtime_disable(&client->dev);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id ov13b10_id_table[] = {
> +	{"ov13b10", 0},
> +	{},
> +};

You can drop this table.

> +
> +MODULE_DEVICE_TABLE(i2c, ov13b10_id_table);
> +
> +static const struct dev_pm_ops ov13b10_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(ov13b10_suspend, ov13b10_resume)
> +};
> +
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id ov13b10_acpi_ids[] = {
> +	{"OVTIDB10"},
> +	{ /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(acpi, ov13b10_acpi_ids);
> +#endif
> +
> +static struct i2c_driver ov13b10_i2c_driver = {
> +	.driver = {
> +		.name = "ov13b10",
> +		.pm = &ov13b10_pm_ops,
> +		.acpi_match_table = ACPI_PTR(ov13b10_acpi_ids),
> +	},
> +	.probe_new = ov13b10_probe,
> +	.remove = ov13b10_remove,
> +	.id_table = ov13b10_id_table,
> +};
> +
> +module_i2c_driver(ov13b10_i2c_driver);
> +
> +MODULE_AUTHOR("Kao, Arec <arec.kao@intel.com>");
> +MODULE_DESCRIPTION("Omnivision ov13b10 sensor driver");
> +MODULE_LICENSE("GPL v2");

-- 
Kind regards,

Sakari Ailus

^ permalink raw reply	[flat|nested] 4+ messages in thread

* RE: [PATCH] Add sensor driver support for the ov13b10 camera.
  2021-08-11 10:40 ` Sakari Ailus
@ 2021-08-12  3:38   ` Kao, Arec
  2021-08-12  6:39     ` Sakari Ailus
  0 siblings, 1 reply; 4+ messages in thread
From: Kao, Arec @ 2021-08-12  3:38 UTC (permalink / raw)
  To: Sakari Ailus; +Cc: linux-media, Yeh, Andy, Chang, Wei Shun

Hi Sakari,

Thank you for the nice feedback. I will fix each of your comments on v2 patch.
As regards to your comment: "Does v/hflip change the pixel order with this driver btw.?", yes, it does actually change bayer order when image flip/mirror and already made some changes with increasing/decreasing horizontal/ vertical window offset in v/hflip function.

Thanks,
BRs,
Arec Kao

-----Original Message-----
From: Sakari Ailus <sakari.ailus@linux.intel.com> 
Sent: Wednesday, August 11, 2021 6:40 PM
To: Kao, Arec <arec.kao@intel.com>
Cc: linux-media@vger.kernel.org; Yeh, Andy <andy.yeh@intel.com>; Chang, Wei Shun <wei.shun.chang@intel.com>
Subject: Re: [PATCH] Add sensor driver support for the ov13b10 camera.

Hi Arec,

Thanks for the patch.

A few small comments below.

On Wed, Aug 11, 2021 at 06:24:02PM +0800, Arec Kao wrote:
> This driver supports following features:
> 
> - phase detection auto focus (PDAF)
> - manual exposure and analog/digital gain control
> - vblank/hblank control
> - test pattern
> - image vertical flip and horizontal mirror control
> - 4208x3120 at 30FPS
> - 2080x1170 at 60FPS
> 
> Signed-off-by: Arec Kao <arec.kao@intel.com>
> ---
>  drivers/media/i2c/Kconfig   |   10 +
>  drivers/media/i2c/Makefile  |    1 +
>  drivers/media/i2c/ov13b10.c | 1414 
> +++++++++++++++++++++++++++++++++++
>  3 files changed, 1425 insertions(+)
>  create mode 100644 drivers/media/i2c/ov13b10.c
> 
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig 
> index 08feb3e8c1bf..ebd90b7dafd9 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -1186,6 +1186,16 @@ config VIDEO_OV13858
>  	  This is a Video4Linux2 sensor driver for the OmniVision
>  	  OV13858 camera.
>  
> +config VIDEO_OV13B10
> +	tristate "OmniVision OV13B10 sensor support"
> +	depends on I2C && VIDEO_V4L2
> +	select MEDIA_CONTROLLER
> +	select VIDEO_V4L2_SUBDEV_API
> +	select V4L2_FWNODE
> +	help
> +	  This is a Video4Linux2 sensor driver for the OmniVision
> +	  OV13B10 camera.
> +
>  config VIDEO_VS6624
>  	tristate "ST VS6624 sensor support"
>  	depends on VIDEO_V4L2 && I2C
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile 
> index 83268f20aa3a..5ac8d639e5ca 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -89,6 +89,7 @@ obj-$(CONFIG_VIDEO_OV9640) += ov9640.o
>  obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
>  obj-$(CONFIG_VIDEO_OV9734) += ov9734.o
>  obj-$(CONFIG_VIDEO_OV13858) += ov13858.o
> +obj-$(CONFIG_VIDEO_OV13B10) += ov13b10.o
>  obj-$(CONFIG_VIDEO_MT9M001) += mt9m001.o
>  obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o
>  obj-$(CONFIG_VIDEO_MT9M111) += mt9m111.o diff --git 
> a/drivers/media/i2c/ov13b10.c b/drivers/media/i2c/ov13b10.c new file 
> mode 100644 index 000000000000..1348352ebd59
> --- /dev/null
> +++ b/drivers/media/i2c/ov13b10.c
> @@ -0,0 +1,1414 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2021 Intel Corporation.
> +
> +#include <linux/acpi.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
> +
> +#define OV13B10_REG_VALUE_08BIT		1
> +#define OV13B10_REG_VALUE_16BIT		2
> +#define OV13B10_REG_VALUE_24BIT		3
> +
> +#define OV13B10_REG_MODE_SELECT		0x0100
> +#define OV13B10_MODE_STANDBY		0x00
> +#define OV13B10_MODE_STREAMING		0x01
> +
> +#define OV13B10_REG_SOFTWARE_RST	0x0103
> +#define OV13B10_SOFTWARE_RST		0x01
> +
> +/* Chip ID */
> +#define OV13B10_REG_CHIP_ID		0x300a
> +#define OV13B10_CHIP_ID			0x560d42
> +
> +/* V_TIMING internal */
> +#define OV13B10_REG_VTS			0x380e
> +#define OV13B10_VTS_30FPS		0x0c7c
> +#define OV13B10_VTS_60FPS		0x063e
> +#define OV13B10_VTS_MAX			0x7fff
> +
> +/* HBLANK control - read only */
> +#define OV13B10_PPL_560MHZ		4704
> +
> +/* Exposure control */
> +#define OV13B10_REG_EXPOSURE		0x3500
> +#define OV13B10_EXPOSURE_MIN		4
> +#define OV13B10_EXPOSURE_STEP		1
> +#define OV13B10_EXPOSURE_DEFAULT	0x40
> +
> +/* Analog gain control */
> +#define OV13B10_REG_ANALOG_GAIN		0x3508
> +#define OV13B10_ANA_GAIN_MIN		0x80
> +#define OV13B10_ANA_GAIN_MAX		0x07c0
> +#define OV13B10_ANA_GAIN_STEP		1
> +#define OV13B10_ANA_GAIN_DEFAULT	0x80
> +
> +/* Digital gain control */
> +#define OV13B10_REG_DGTL_GAIN_H		0x350a
> +#define OV13B10_REG_DGTL_GAIN_M		0x350b
> +#define OV13B10_REG_DGTL_GAIN_L		0x350c
> +
> +#define OV13B10_DGTL_GAIN_MIN		1024		/* Min = 1 X */
> +#define OV13B10_DGTL_GAIN_MAX		(4096 - 1)	/* Max = 4 X */
> +#define OV13B10_DGTL_GAIN_DEFAULT	2560		/* Default gain = 2.5 X */
> +#define OV13B10_DGTL_GAIN_STEP		1		/* Each step = 1/1024 */
> +
> +#define OV13B10_DGTL_GAIN_L_SHIFT	6
> +#define OV13B10_DGTL_GAIN_L_MASK	0x3
> +#define OV13B10_DGTL_GAIN_M_SHIFT	2
> +#define OV13B10_DGTL_GAIN_M_MASK	0xff
> +#define OV13B10_DGTL_GAIN_H_SHIFT	10
> +#define OV13B10_DGTL_GAIN_H_MASK	0x3
> +
> +/* Test Pattern Control */
> +#define OV13B10_REG_TEST_PATTERN	0x5080
> +#define OV13B10_TEST_PATTERN_ENABLE	BIT(7)
> +#define OV13B10_TEST_PATTERN_MASK	0xf3
> +#define OV13B10_TEST_PATTERN_BAR_SHIFT	2
> +
> +/* Flip Control */
> +#define OV13B10_REG_FORMAT1		0x3820
> +#define OV13B10_REG_FORMAT2		0x3821
> +
> +/* Horizontal Window Offset */
> +#define OV13B10_REG_H_WIN_OFFSET	0x3811
> +
> +/* Vertical Window Offset */
> +#define OV13B10_REG_V_WIN_OFFSET	0x3813
> +
> +struct ov13b10_reg {
> +	u16 address;
> +	u8 val;
> +};
> +
> +struct ov13b10_reg_list {
> +	u32 num_of_regs;
> +	const struct ov13b10_reg *regs;
> +};
> +
> +/* Link frequency config */
> +struct ov13b10_link_freq_config {
> +	u32 pixels_per_line;
> +
> +	/* registers for this link frequency */
> +	struct ov13b10_reg_list reg_list;
> +};
> +
> +/* Mode : resolution and related config&values */ struct ov13b10_mode 
> +{
> +	/* Frame width */
> +	u32 width;
> +	/* Frame height */
> +	u32 height;
> +
> +	/* V-timing */
> +	u32 vts_def;
> +	u32 vts_min;
> +
> +	/* Index of Link frequency config to be used */
> +	u32 link_freq_index;
> +	/* Default register values */
> +	struct ov13b10_reg_list reg_list;
> +};
> +
> +/* 4208x3120 needs 1120Mbps/lane, 4 lanes */ static const struct 
> +ov13b10_reg mipi_data_rate_1120mbps[] = {
> +	{0x0103, 0x01},
> +	{0x0303, 0x04},
> +	{0x0305, 0xaf},
> +	{0x0321, 0x00},
> +	{0x0323, 0x04},
> +	{0x0324, 0x01},
> +	{0x0325, 0xa4},
> +	{0x0326, 0x81},
> +	{0x0327, 0x04},
> +	{0x3012, 0x07},
> +	{0x3013, 0x32},
> +	{0x3107, 0x23},
> +	{0x3501, 0x0c},
> +	{0x3502, 0x10},
> +	{0x3504, 0x08},
> +	{0x3508, 0x07},
> +	{0x3509, 0xc0},
> +	{0x3600, 0x16},
> +	{0x3601, 0x54},
> +	{0x3612, 0x4e},
> +	{0x3620, 0x00},
> +	{0x3621, 0x68},
> +	{0x3622, 0x66},
> +	{0x3623, 0x03},
> +	{0x3662, 0x92},
> +	{0x3666, 0xbb},
> +	{0x3667, 0x44},
> +	{0x366e, 0xff},
> +	{0x366f, 0xf3},
> +	{0x3675, 0x44},
> +	{0x3676, 0x00},
> +	{0x367f, 0xe9},
> +	{0x3681, 0x32},
> +	{0x3682, 0x1f},
> +	{0x3683, 0x0b},
> +	{0x3684, 0x0b},
> +	{0x3704, 0x0f},
> +	{0x3706, 0x40},
> +	{0x3708, 0x3b},
> +	{0x3709, 0x72},
> +	{0x370b, 0xa2},
> +	{0x3714, 0x24},
> +	{0x371a, 0x3e},
> +	{0x3725, 0x42},
> +	{0x3739, 0x12},
> +	{0x3767, 0x00},
> +	{0x377a, 0x0d},
> +	{0x3789, 0x18},
> +	{0x3790, 0x40},
> +	{0x3791, 0xa2},
> +	{0x37c2, 0x04},
> +	{0x37c3, 0xf1},
> +	{0x37d9, 0x0c},
> +	{0x37da, 0x02},
> +	{0x37dc, 0x02},
> +	{0x37e1, 0x04},
> +	{0x37e2, 0x0a},
> +	{0x3800, 0x00},
> +	{0x3801, 0x00},
> +	{0x3802, 0x00},
> +	{0x3803, 0x08},
> +	{0x3804, 0x10},
> +	{0x3805, 0x8f},
> +	{0x3806, 0x0c},
> +	{0x3807, 0x47},
> +	{0x3808, 0x10},
> +	{0x3809, 0x70},
> +	{0x380a, 0x0c},
> +	{0x380b, 0x30},
> +	{0x380c, 0x04},
> +	{0x380d, 0x98},
> +	{0x380e, 0x0c},
> +	{0x380f, 0x7c},
> +	{0x3811, 0x0f},
> +	{0x3813, 0x09},
> +	{0x3814, 0x01},
> +	{0x3815, 0x01},
> +	{0x3816, 0x01},
> +	{0x3817, 0x01},
> +	{0x381f, 0x08},
> +	{0x3820, 0x88},
> +	{0x3821, 0x00},
> +	{0x3822, 0x14},
> +	{0x382e, 0xe6},
> +	{0x3c80, 0x00},
> +	{0x3c87, 0x01},
> +	{0x3c8c, 0x19},
> +	{0x3c8d, 0x1c},
> +	{0x3ca0, 0x00},
> +	{0x3ca1, 0x00},
> +	{0x3ca2, 0x00},
> +	{0x3ca3, 0x00},
> +	{0x3ca4, 0x50},
> +	{0x3ca5, 0x11},
> +	{0x3ca6, 0x01},
> +	{0x3ca7, 0x00},
> +	{0x3ca8, 0x00},
> +	{0x4008, 0x02},
> +	{0x4009, 0x0f},
> +	{0x400a, 0x01},
> +	{0x400b, 0x19},
> +	{0x4011, 0x21},
> +	{0x4017, 0x08},
> +	{0x4019, 0x04},
> +	{0x401a, 0x58},
> +	{0x4032, 0x1e},
> +	{0x4050, 0x02},
> +	{0x4051, 0x09},
> +	{0x405e, 0x00},
> +	{0x4066, 0x02},
> +	{0x4501, 0x00},
> +	{0x4502, 0x10},
> +	{0x4505, 0x00},
> +	{0x4800, 0x64},
> +	{0x481b, 0x3e},
> +	{0x481f, 0x30},
> +	{0x4825, 0x34},
> +	{0x4837, 0x0e},
> +	{0x484b, 0x01},
> +	{0x4883, 0x02},
> +	{0x5000, 0xff},
> +	{0x5001, 0x0f},
> +	{0x5045, 0x20},
> +	{0x5046, 0x20},
> +	{0x5047, 0xa4},
> +	{0x5048, 0x20},
> +	{0x5049, 0xa4},
> +	{0x0100, 0x01},
> +};
> +
> +static const struct ov13b10_reg mode_4208x3120_regs[] = {
> +	{0x0305, 0xaf},
> +	{0x3501, 0x0c},
> +	{0x3662, 0x92},
> +	{0x3714, 0x24},
> +	{0x3739, 0x12},
> +	{0x37c2, 0x04},
> +	{0x37d9, 0x0c},
> +	{0x37e2, 0x0a},
> +	{0x3800, 0x00},
> +	{0x3801, 0x00},
> +	{0x3802, 0x00},
> +	{0x3803, 0x08},
> +	{0x3804, 0x10},
> +	{0x3805, 0x8f},
> +	{0x3806, 0x0c},
> +	{0x3807, 0x47},
> +	{0x3808, 0x10},
> +	{0x3809, 0x70},
> +	{0x380a, 0x0c},
> +	{0x380b, 0x30},
> +	{0x380c, 0x04},
> +	{0x380d, 0x98},
> +	{0x380e, 0x0c},
> +	{0x380f, 0x7c},
> +	{0x3810, 0x00},
> +	{0x3811, 0x0f},
> +	{0x3812, 0x00},
> +	{0x3813, 0x09},
> +	{0x3814, 0x01},
> +	{0x3816, 0x01},
> +	{0x3820, 0x88},
> +	{0x3c8c, 0x19},
> +	{0x4008, 0x02},
> +	{0x4009, 0x0f},
> +	{0x4050, 0x02},
> +	{0x4051, 0x09},
> +	{0x4501, 0x00},
> +	{0x4505, 0x00},
> +	{0x4837, 0x0e},
> +	{0x5000, 0xff},
> +	{0x5001, 0x0f},
> +};
> +
> +static const struct ov13b10_reg mode_4160x3120_regs[] = {
> +	{0x0305, 0xaf},
> +	{0x3501, 0x0c},
> +	{0x3662, 0x92},
> +	{0x3714, 0x24},
> +	{0x3739, 0x12},
> +	{0x37c2, 0x04},
> +	{0x37d9, 0x0c},
> +	{0x37e2, 0x0a},
> +	{0x3800, 0x00},
> +	{0x3801, 0x00},
> +	{0x3802, 0x00},
> +	{0x3803, 0x08},
> +	{0x3804, 0x10},
> +	{0x3805, 0x8f},
> +	{0x3806, 0x0c},
> +	{0x3807, 0x47},
> +	{0x3808, 0x10},
> +	{0x3809, 0x40},
> +	{0x380a, 0x0c},
> +	{0x380b, 0x30},
> +	{0x380c, 0x04},
> +	{0x380d, 0x98},
> +	{0x380e, 0x0c},
> +	{0x380f, 0x7c},
> +	{0x3810, 0x00},
> +	{0x3811, 0x27},
> +	{0x3812, 0x00},
> +	{0x3813, 0x09},
> +	{0x3814, 0x01},
> +	{0x3816, 0x01},
> +	{0x3820, 0x88},
> +	{0x3c8c, 0x19},
> +	{0x4008, 0x02},
> +	{0x4009, 0x0f},
> +	{0x4050, 0x02},
> +	{0x4051, 0x09},
> +	{0x4501, 0x00},
> +	{0x4505, 0x00},
> +	{0x4837, 0x0e},
> +	{0x5000, 0xff},
> +	{0x5001, 0x0f},
> +};
> +
> +static const struct ov13b10_reg mode_4160x2340_regs[] = {
> +	{0x0305, 0xaf},
> +	{0x3501, 0x0c},
> +	{0x3662, 0x92},
> +	{0x3714, 0x24},
> +	{0x3739, 0x12},
> +	{0x37c2, 0x04},
> +	{0x37d9, 0x0c},
> +	{0x37e2, 0x0a},
> +	{0x3800, 0x00},
> +	{0x3801, 0x00},
> +	{0x3802, 0x00},
> +	{0x3803, 0x08},
> +	{0x3804, 0x10},
> +	{0x3805, 0x8f},
> +	{0x3806, 0x0c},
> +	{0x3807, 0x47},
> +	{0x3808, 0x10},
> +	{0x3809, 0x40},
> +	{0x380a, 0x09},
> +	{0x380b, 0x24},
> +	{0x380c, 0x04},
> +	{0x380d, 0x98},
> +	{0x380e, 0x0c},
> +	{0x380f, 0x7c},
> +	{0x3810, 0x00},
> +	{0x3811, 0x27},
> +	{0x3812, 0x01},
> +	{0x3813, 0x8f},
> +	{0x3814, 0x01},
> +	{0x3816, 0x01},
> +	{0x3820, 0x88},
> +	{0x3c8c, 0x19},
> +	{0x4008, 0x02},
> +	{0x4009, 0x0f},
> +	{0x4050, 0x02},
> +	{0x4051, 0x09},
> +	{0x4501, 0x00},
> +	{0x4505, 0x00},
> +	{0x4837, 0x0e},
> +	{0x5000, 0xff},
> +	{0x5001, 0x0f},
> +};
> +
> +static const struct ov13b10_reg mode_2104x1560_regs[] = {
> +	{0x0305, 0xaf},
> +	{0x3501, 0x06},
> +	{0x3662, 0x88},
> +	{0x3714, 0x28},
> +	{0x3739, 0x10},
> +	{0x37c2, 0x14},
> +	{0x37d9, 0x06},
> +	{0x37e2, 0x0c},
> +	{0x3800, 0x00},
> +	{0x3801, 0x00},
> +	{0x3802, 0x00},
> +	{0x3803, 0x08},
> +	{0x3804, 0x10},
> +	{0x3805, 0x8f},
> +	{0x3806, 0x0c},
> +	{0x3807, 0x47},
> +	{0x3808, 0x08},
> +	{0x3809, 0x38},
> +	{0x380a, 0x06},
> +	{0x380b, 0x18},
> +	{0x380c, 0x04},
> +	{0x380d, 0x98},
> +	{0x380e, 0x06},
> +	{0x380f, 0x3e},
> +	{0x3810, 0x00},
> +	{0x3811, 0x07},
> +	{0x3812, 0x00},
> +	{0x3813, 0x05},
> +	{0x3814, 0x03},
> +	{0x3816, 0x03},
> +	{0x3820, 0x8b},
> +	{0x3c8c, 0x18},
> +	{0x4008, 0x00},
> +	{0x4009, 0x05},
> +	{0x4050, 0x00},
> +	{0x4051, 0x05},
> +	{0x4501, 0x08},
> +	{0x4505, 0x00},
> +	{0x4837, 0x0e},
> +	{0x5000, 0xfd},
> +	{0x5001, 0x0d},
> +};
> +
> +static const struct ov13b10_reg mode_2080x1170_regs[] = {
> +	{0x0305, 0xaf},
> +	{0x3501, 0x06},
> +	{0x3662, 0x88},
> +	{0x3714, 0x28},
> +	{0x3739, 0x10},
> +	{0x37c2, 0x14},
> +	{0x37d9, 0x06},
> +	{0x37e2, 0x0c},
> +	{0x3800, 0x00},
> +	{0x3801, 0x00},
> +	{0x3802, 0x00},
> +	{0x3803, 0x08},
> +	{0x3804, 0x10},
> +	{0x3805, 0x8f},
> +	{0x3806, 0x0c},
> +	{0x3807, 0x47},
> +	{0x3808, 0x08},
> +	{0x3809, 0x20},
> +	{0x380a, 0x04},
> +	{0x380b, 0x92},
> +	{0x380c, 0x04},
> +	{0x380d, 0x98},
> +	{0x380e, 0x06},
> +	{0x380f, 0x3e},
> +	{0x3810, 0x00},
> +	{0x3811, 0x13},
> +	{0x3812, 0x00},
> +	{0x3813, 0xc9},
> +	{0x3814, 0x03},
> +	{0x3816, 0x03},
> +	{0x3820, 0x8b},
> +	{0x3c8c, 0x18},
> +	{0x4008, 0x00},
> +	{0x4009, 0x05},
> +	{0x4050, 0x00},
> +	{0x4051, 0x05},
> +	{0x4501, 0x08},
> +	{0x4505, 0x00},
> +	{0x4837, 0x0e},
> +	{0x5000, 0xfd},
> +	{0x5001, 0x0d},
> +};
> +
> +static const char * const ov13b10_test_pattern_menu[] = {
> +	"Disabled",
> +	"Vertical Color Bar Type 1",
> +	"Vertical Color Bar Type 2",
> +	"Vertical Color Bar Type 3",
> +	"Vertical Color Bar Type 4"
> +};
> +
> +/* Configurations for supported link frequencies */
> +#define OV13B10_NUM_OF_LINK_FREQS	1
> +#define OV13B10_LINK_FREQ_560MHZ	560000000ULL
> +#define OV13B10_LINK_FREQ_INDEX_0	0
> +
> +/*
> + * pixel_rate = link_freq * data-rate * nr_of_lanes / bits_per_sample
> + * data rate => double data rate; number of lanes => 4; bits per 
> +pixel => 10  */ static u64 link_freq_to_pixel_rate(u64 f) {
> +	f *= 2 * 4;
> +	do_div(f, 10);
> +
> +	return f;
> +}
> +
> +/* Menu items for LINK_FREQ V4L2 control */ static const s64 
> +link_freq_menu_items[OV13B10_NUM_OF_LINK_FREQS] = {
> +	OV13B10_LINK_FREQ_560MHZ
> +};
> +
> +/* Link frequency configs */
> +static const struct ov13b10_link_freq_config
> +			link_freq_configs[OV13B10_NUM_OF_LINK_FREQS] = {
> +	{
> +		.pixels_per_line = OV13B10_PPL_560MHZ,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mipi_data_rate_1120mbps),
> +			.regs = mipi_data_rate_1120mbps,
> +		}
> +	}
> +};
> +
> +/* Mode configs */
> +static const struct ov13b10_mode supported_modes[] = {
> +	{
> +		.width = 4208,
> +		.height = 3120,
> +		.vts_def = OV13B10_VTS_30FPS,
> +		.vts_min = OV13B10_VTS_30FPS,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mode_4208x3120_regs),
> +			.regs = mode_4208x3120_regs,
> +		},
> +		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
> +	},
> +	{
> +		.width = 4160,
> +		.height = 3120,
> +		.vts_def = OV13B10_VTS_30FPS,
> +		.vts_min = OV13B10_VTS_30FPS,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mode_4160x3120_regs),
> +			.regs = mode_4160x3120_regs,
> +		},
> +		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
> +	},
> +	{
> +		.width = 4160,
> +		.height = 2340,
> +		.vts_def = OV13B10_VTS_30FPS,
> +		.vts_min = OV13B10_VTS_30FPS,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mode_4160x2340_regs),
> +			.regs = mode_4160x2340_regs,
> +		},
> +		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
> +	},
> +	{
> +		.width = 2104,
> +		.height = 1560,
> +		.vts_def = OV13B10_VTS_60FPS,
> +		.vts_min = OV13B10_VTS_60FPS,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mode_2104x1560_regs),
> +			.regs = mode_2104x1560_regs,
> +		},
> +		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
> +	},
> +		{
> +		.width = 2080,
> +		.height = 1170,
> +		.vts_def = OV13B10_VTS_60FPS,
> +		.vts_min = OV13B10_VTS_60FPS,
> +		.reg_list = {
> +			.num_of_regs = ARRAY_SIZE(mode_2080x1170_regs),
> +			.regs = mode_2080x1170_regs,
> +		},
> +		.link_freq_index = OV13B10_LINK_FREQ_INDEX_0,
> +	}
> +};
> +
> +struct ov13b10 {
> +	struct v4l2_subdev sd;
> +	struct media_pad pad;
> +
> +	struct v4l2_ctrl_handler ctrl_handler;
> +	/* V4L2 Controls */
> +	struct v4l2_ctrl *link_freq;
> +	struct v4l2_ctrl *pixel_rate;
> +	struct v4l2_ctrl *vblank;
> +	struct v4l2_ctrl *hblank;
> +	struct v4l2_ctrl *exposure;
> +
> +	/* Current mode */
> +	const struct ov13b10_mode *cur_mode;
> +
> +	/* Mutex for serialized access */
> +	struct mutex mutex;
> +
> +	/* Streaming on/off */
> +	bool streaming;
> +};
> +
> +#define to_ov13b10(_sd)	container_of(_sd, struct ov13b10, sd)
> +
> +/* Read registers up to 4 at a time */ static int 
> +ov13b10_read_reg(struct ov13b10 *ov13b,
> +			    u16 reg, u32 len, u32 *val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
> +	struct i2c_msg msgs[2];
> +	u8 *data_be_p;
> +	int ret;
> +	__be32 data_be = 0;
> +	__be16 reg_addr_be = cpu_to_be16(reg);
> +
> +	if (len > 4)
> +		return -EINVAL;
> +
> +	data_be_p = (u8 *)&data_be;
> +	/* Write register address */
> +	msgs[0].addr = client->addr;
> +	msgs[0].flags = 0;
> +	msgs[0].len = 2;
> +	msgs[0].buf = (u8 *)&reg_addr_be;
> +
> +	/* Read data from register */
> +	msgs[1].addr = client->addr;
> +	msgs[1].flags = I2C_M_RD;
> +	msgs[1].len = len;
> +	msgs[1].buf = &data_be_p[4 - len];
> +
> +	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
> +	if (ret != ARRAY_SIZE(msgs))
> +		return -EIO;
> +
> +	*val = be32_to_cpu(data_be);
> +
> +	return 0;
> +}
> +
> +/* Write registers up to 4 at a time */ static int 
> +ov13b10_write_reg(struct ov13b10 *ov13b,
> +			     u16 reg, u32 len, u32 __val)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
> +	int buf_i, val_i;
> +	u8 buf[6], *val_p;
> +	__be32 val;
> +
> +	if (len > 4)
> +		return -EINVAL;
> +
> +	buf[0] = reg >> 8;
> +	buf[1] = reg & 0xff;
> +
> +	val = cpu_to_be32(__val);
> +	val_p = (u8 *)&val;
> +	buf_i = 2;
> +	val_i = 4 - len;
> +
> +	while (val_i < 4)
> +		buf[buf_i++] = val_p[val_i++];
> +
> +	if (i2c_master_send(client, buf, len + 2) != len + 2)
> +		return -EIO;
> +
> +	return 0;
> +}
> +
> +/* Write a list of registers */
> +static int ov13b10_write_regs(struct ov13b10 *ov13b,
> +			      const struct ov13b10_reg *regs, u32 len) {
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
> +	int ret;
> +	u32 i;
> +
> +	for (i = 0; i < len; i++) {
> +		ret = ov13b10_write_reg(ov13b, regs[i].address, 1,
> +					regs[i].val);
> +		if (ret) {
> +			dev_err_ratelimited(
> +				&client->dev,
> +				"Failed to write reg 0x%4.4x. error = %d\n",
> +				regs[i].address, ret);
> +
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int ov13b10_write_reg_list(struct ov13b10 *ov13b,
> +				  const struct ov13b10_reg_list *r_list) {
> +	return ov13b10_write_regs(ov13b, r_list->regs, r_list->num_of_regs); 
> +}
> +
> +/* Open sub-device */
> +static int ov13b10_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh 
> +*fh) {
> +	struct ov13b10 *ov13b = to_ov13b10(sd);
> +	struct v4l2_mbus_framefmt *try_fmt = v4l2_subdev_get_try_format(sd,
> +									fh->state,
> +									0);
> +
> +	mutex_lock(&ov13b->mutex);
> +
> +	/* Initialize try_fmt */
> +	try_fmt->width = ov13b->cur_mode->width;
> +	try_fmt->height = ov13b->cur_mode->height;

These should be the defaults for the driver, not reflect the current configuration (apart from the pixel order at least).

Does v/hflip change the pixel order with this driver btw.?

> +	try_fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +	try_fmt->field = V4L2_FIELD_NONE;
> +
> +	/* No crop or compose */
> +	mutex_unlock(&ov13b->mutex);
> +
> +	return 0;
> +}
> +
> +static int ov13b10_update_digital_gain(struct ov13b10 *ov13b, u32 
> +d_gain) {
> +	int ret;
> +	u32 val;
> +
> +	/*
> +	 * 0x350C[7:6], 0x350B[7:0], 0x350A[1:0]
> +	 */
> +
> +	val = (d_gain & OV13B10_DGTL_GAIN_L_MASK) << OV13B10_DGTL_GAIN_L_SHIFT;
> +	ret = ov13b10_write_reg(ov13b, OV13B10_REG_DGTL_GAIN_L,
> +				OV13B10_REG_VALUE_08BIT, val);
> +	if (ret)
> +		return ret;
> +
> +	val = (d_gain >> OV13B10_DGTL_GAIN_M_SHIFT) & OV13B10_DGTL_GAIN_M_MASK;
> +	ret = ov13b10_write_reg(ov13b, OV13B10_REG_DGTL_GAIN_M,
> +				OV13B10_REG_VALUE_08BIT, val);
> +	if (ret)
> +		return ret;
> +
> +	val = (d_gain >> OV13B10_DGTL_GAIN_H_SHIFT) & OV13B10_DGTL_GAIN_H_MASK;
> +	ret = ov13b10_write_reg(ov13b, OV13B10_REG_DGTL_GAIN_H,
> +				OV13B10_REG_VALUE_08BIT, val);
> +
> +	return ret;
> +}
> +
> +static int ov13b10_enable_test_pattern(struct ov13b10 *ov13b, u32 
> +pattern) {
> +	int ret;
> +	u32 val;
> +
> +	ret = ov13b10_read_reg(ov13b, OV13B10_REG_TEST_PATTERN,
> +			       OV13B10_REG_VALUE_08BIT, &val);
> +	if (ret)
> +		return ret;
> +
> +	if (pattern) {
> +		val &= OV13B10_TEST_PATTERN_MASK;
> +		val |= ((pattern - 1) << OV13B10_TEST_PATTERN_BAR_SHIFT) |
> +		     OV13B10_TEST_PATTERN_ENABLE;
> +	} else {
> +		val &= ~OV13B10_TEST_PATTERN_ENABLE;
> +	}
> +
> +	return ov13b10_write_reg(ov13b, OV13B10_REG_TEST_PATTERN,
> +				 OV13B10_REG_VALUE_08BIT, val);
> +}
> +
> +static int ov13b10_set_ctrl_hflip(struct ov13b10 *ov13b, u32 
> +ctrl_val) {
> +	int ret;
> +	u32 val;
> +
> +	ret = ov13b10_read_reg(ov13b, OV13B10_REG_FORMAT1,
> +			       OV13B10_REG_VALUE_08BIT, &val);
> +	if (ret)
> +		return ret;
> +
> +	ret = ov13b10_write_reg(ov13b, OV13B10_REG_FORMAT1,
> +				OV13B10_REG_VALUE_08BIT,
> +				ctrl_val ? val & ~BIT(3) : val);
> +
> +	if (ret)
> +		return ret;
> +
> +	ret = ov13b10_read_reg(ov13b, OV13B10_REG_H_WIN_OFFSET,
> +			       OV13B10_REG_VALUE_08BIT, &val);
> +	if (ret)
> +		return ret;
> +
> +	return ov13b10_write_reg(ov13b, OV13B10_REG_H_WIN_OFFSET,
> +				 OV13B10_REG_VALUE_08BIT,
> +				 ctrl_val ? ++val : val);
> +}
> +
> +static int ov13b10_set_ctrl_vflip(struct ov13b10 *ov13b, u32 
> +ctrl_val) {
> +	int ret;
> +	u32 val;
> +
> +	ret = ov13b10_read_reg(ov13b, OV13B10_REG_FORMAT1,
> +			       OV13B10_REG_VALUE_08BIT, &val);
> +	if (ret)
> +		return ret;
> +
> +	ret = ov13b10_write_reg(ov13b, OV13B10_REG_FORMAT1,
> +				OV13B10_REG_VALUE_08BIT,
> +				ctrl_val ? val | BIT(4) | BIT(5)  : val);
> +
> +	if (ret)
> +		return ret;
> +
> +	ret = ov13b10_read_reg(ov13b, OV13B10_REG_V_WIN_OFFSET,
> +			       OV13B10_REG_VALUE_08BIT, &val);
> +	if (ret)
> +		return ret;
> +
> +	return ov13b10_write_reg(ov13b, OV13B10_REG_V_WIN_OFFSET,
> +				 OV13B10_REG_VALUE_08BIT,
> +				 ctrl_val ? --val : val);
> +}
> +
> +static int ov13b10_set_ctrl(struct v4l2_ctrl *ctrl) {
> +	struct ov13b10 *ov13b = container_of(ctrl->handler,
> +					     struct ov13b10, ctrl_handler);
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
> +	s64 max;
> +	int ret;
> +
> +	/* Propagate change of current control to all related controls */
> +	switch (ctrl->id) {
> +	case V4L2_CID_VBLANK:
> +		/* Update max exposure while meeting expected vblanking */
> +		max = ov13b->cur_mode->height + ctrl->val - 8;
> +		__v4l2_ctrl_modify_range(ov13b->exposure,
> +					 ov13b->exposure->minimum,
> +					 max, ov13b->exposure->step, max);
> +		break;
> +	}
> +
> +	/*
> +	 * Applying V4L2 control value only happens
> +	 * when power is up for streaming
> +	 */
> +	if (!pm_runtime_get_if_in_use(&client->dev))
> +		return 0;
> +
> +	ret = 0;
> +	switch (ctrl->id) {
> +	case V4L2_CID_ANALOGUE_GAIN:
> +		ret = ov13b10_write_reg(ov13b, OV13B10_REG_ANALOG_GAIN,
> +					OV13B10_REG_VALUE_16BIT,
> +					ctrl->val << 1);
> +		break;
> +	case V4L2_CID_DIGITAL_GAIN:
> +		ret = ov13b10_update_digital_gain(ov13b, ctrl->val);
> +		break;
> +	case V4L2_CID_EXPOSURE:
> +		ret = ov13b10_write_reg(ov13b, OV13B10_REG_EXPOSURE,
> +					OV13B10_REG_VALUE_24BIT,
> +					ctrl->val);
> +		break;
> +	case V4L2_CID_VBLANK:
> +		ret = ov13b10_write_reg(ov13b, OV13B10_REG_VTS,
> +					OV13B10_REG_VALUE_16BIT,
> +					ov13b->cur_mode->height
> +					  + ctrl->val);

Fits on previous line.

> +		break;
> +	case V4L2_CID_TEST_PATTERN:
> +		ret = ov13b10_enable_test_pattern(ov13b, ctrl->val);
> +		break;
> +	case V4L2_CID_HFLIP:
> +		ov13b10_set_ctrl_hflip(ov13b, ctrl->val);
> +		break;
> +	case V4L2_CID_VFLIP:
> +		ov13b10_set_ctrl_vflip(ov13b, ctrl->val);
> +		break;
> +	default:
> +		dev_info(&client->dev,
> +			 "ctrl(id:0x%x,val:0x%x) is not handled\n",
> +			 ctrl->id, ctrl->val);
> +		break;
> +	}
> +
> +	pm_runtime_put(&client->dev);
> +
> +	return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops ov13b10_ctrl_ops = {
> +	.s_ctrl = ov13b10_set_ctrl,
> +};
> +
> +static int ov13b10_enum_mbus_code(struct v4l2_subdev *sd,
> +				  struct v4l2_subdev_state *sd_state,
> +				  struct v4l2_subdev_mbus_code_enum *code) {
> +	/* Only one bayer order(GRBG) is supported */
> +	if (code->index > 0)
> +		return -EINVAL;
> +
> +	code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +
> +	return 0;
> +}
> +
> +static int ov13b10_enum_frame_size(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_state *sd_state,
> +				   struct v4l2_subdev_frame_size_enum *fse) {
> +	if (fse->index >= ARRAY_SIZE(supported_modes))
> +		return -EINVAL;
> +
> +	if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
> +		return -EINVAL;
> +
> +	fse->min_width = supported_modes[fse->index].width;
> +	fse->max_width = fse->min_width;
> +	fse->min_height = supported_modes[fse->index].height;
> +	fse->max_height = fse->min_height;
> +
> +	return 0;
> +}
> +
> +static void ov13b10_update_pad_format(const struct ov13b10_mode *mode,
> +				      struct v4l2_subdev_format *fmt) {
> +	fmt->format.width = mode->width;
> +	fmt->format.height = mode->height;
> +	fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +	fmt->format.field = V4L2_FIELD_NONE; }
> +
> +static int ov13b10_do_get_pad_format(struct ov13b10 *ov13b,
> +				     struct v4l2_subdev_state *sd_state,
> +				     struct v4l2_subdev_format *fmt) {
> +	struct v4l2_mbus_framefmt *framefmt;
> +	struct v4l2_subdev *sd = &ov13b->sd;
> +
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> +		framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> +		fmt->format = *framefmt;
> +	} else {
> +		ov13b10_update_pad_format(ov13b->cur_mode, fmt);
> +	}
> +
> +	return 0;
> +}
> +
> +static int ov13b10_get_pad_format(struct v4l2_subdev *sd,
> +				  struct v4l2_subdev_state *sd_state,
> +				  struct v4l2_subdev_format *fmt) {
> +	struct ov13b10 *ov13b = to_ov13b10(sd);
> +	int ret;
> +
> +	mutex_lock(&ov13b->mutex);
> +	ret = ov13b10_do_get_pad_format(ov13b, sd_state, fmt);
> +	mutex_unlock(&ov13b->mutex);
> +
> +	return ret;
> +}
> +
> +static int
> +ov13b10_set_pad_format(struct v4l2_subdev *sd,
> +		       struct v4l2_subdev_state *sd_state,
> +		       struct v4l2_subdev_format *fmt) {
> +	struct ov13b10 *ov13b = to_ov13b10(sd);
> +	const struct ov13b10_mode *mode;
> +	struct v4l2_mbus_framefmt *framefmt;
> +	s32 vblank_def;
> +	s32 vblank_min;
> +	s64 h_blank;
> +	s64 pixel_rate;
> +	s64 link_freq;
> +
> +	mutex_lock(&ov13b->mutex);
> +
> +	/* Only one raw bayer(GRBG) order is supported */
> +	if (fmt->format.code != MEDIA_BUS_FMT_SGRBG10_1X10)
> +		fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +
> +	mode = v4l2_find_nearest_size(supported_modes,
> +				      ARRAY_SIZE(supported_modes),
> +				      width, height,
> +				      fmt->format.width, fmt->format.height);
> +	ov13b10_update_pad_format(mode, fmt);
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> +		framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> +		*framefmt = fmt->format;
> +	} else {
> +		ov13b->cur_mode = mode;
> +		__v4l2_ctrl_s_ctrl(ov13b->link_freq, mode->link_freq_index);
> +		link_freq = link_freq_menu_items[mode->link_freq_index];
> +		pixel_rate = link_freq_to_pixel_rate(link_freq);
> +		__v4l2_ctrl_s_ctrl_int64(ov13b->pixel_rate, pixel_rate);
> +
> +		/* Update limits and set FPS to default */
> +		vblank_def = ov13b->cur_mode->vts_def -
> +			     ov13b->cur_mode->height;
> +		vblank_min = ov13b->cur_mode->vts_min -
> +			     ov13b->cur_mode->height;
> +		__v4l2_ctrl_modify_range(

Could you still run this through scripts/checkpatch.pl? In particular, lines shouldn't end in an opening parenthesis.

There are also lines over 80 chars for no apparent reason.

> +			ov13b->vblank, vblank_min,
> +			OV13B10_VTS_MAX - ov13b->cur_mode->height, 1,
> +			vblank_def);
> +		__v4l2_ctrl_s_ctrl(ov13b->vblank, vblank_def);
> +		h_blank =
> +			link_freq_configs[mode->link_freq_index].pixels_per_line
> +			 - ov13b->cur_mode->width;
> +		__v4l2_ctrl_modify_range(ov13b->hblank, h_blank,
> +					 h_blank, 1, h_blank);
> +	}
> +
> +	mutex_unlock(&ov13b->mutex);
> +
> +	return 0;
> +}
> +
> +static int ov13b10_start_streaming(struct ov13b10 *ov13b) {
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
> +	const struct ov13b10_reg_list *reg_list;
> +	int ret, link_freq_index;
> +
> +	/* Get out of from software reset */
> +	ret = ov13b10_write_reg(ov13b, OV13B10_REG_SOFTWARE_RST,
> +				OV13B10_REG_VALUE_08BIT, OV13B10_SOFTWARE_RST);
> +	if (ret) {
> +		dev_err(&client->dev, "%s failed to set powerup registers\n",
> +			__func__);
> +		return ret;
> +	}
> +
> +	link_freq_index = ov13b->cur_mode->link_freq_index;
> +	reg_list = &link_freq_configs[link_freq_index].reg_list;
> +	ret = ov13b10_write_reg_list(ov13b, reg_list);
> +	if (ret) {
> +		dev_err(&client->dev, "%s failed to set plls\n", __func__);
> +		return ret;
> +	}
> +
> +	/* Apply default values of current mode */
> +	reg_list = &ov13b->cur_mode->reg_list;
> +	ret = ov13b10_write_reg_list(ov13b, reg_list);
> +	if (ret) {
> +		dev_err(&client->dev, "%s failed to set mode\n", __func__);
> +		return ret;
> +	}
> +
> +	/* Apply customized values from user */
> +	ret =  __v4l2_ctrl_handler_setup(ov13b->sd.ctrl_handler);
> +	if (ret)
> +		return ret;
> +
> +	return ov13b10_write_reg(ov13b, OV13B10_REG_MODE_SELECT,
> +				 OV13B10_REG_VALUE_08BIT,
> +				 OV13B10_MODE_STREAMING);
> +}
> +
> +/* Stop streaming */
> +static int ov13b10_stop_streaming(struct ov13b10 *ov13b) {
> +	return ov13b10_write_reg(ov13b, OV13B10_REG_MODE_SELECT,
> +				 OV13B10_REG_VALUE_08BIT, OV13B10_MODE_STANDBY); }
> +
> +static int ov13b10_set_stream(struct v4l2_subdev *sd, int enable) {
> +	struct ov13b10 *ov13b = to_ov13b10(sd);
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	int ret = 0;
> +
> +	mutex_lock(&ov13b->mutex);
> +	if (ov13b->streaming == enable) {
> +		mutex_unlock(&ov13b->mutex);
> +		return 0;
> +	}
> +
> +	if (enable) {
> +		ret = pm_runtime_resume_and_get(&client->dev);
> +		if (ret < 0)
> +			goto err_unlock;
> +
> +		/*
> +		 * Apply default & customized values
> +		 * and then start streaming.
> +		 */
> +		ret = ov13b10_start_streaming(ov13b);
> +		if (ret)
> +			goto err_rpm_put;
> +	} else {
> +		ov13b10_stop_streaming(ov13b);
> +		pm_runtime_put(&client->dev);
> +	}
> +
> +	ov13b->streaming = enable;
> +	mutex_unlock(&ov13b->mutex);
> +
> +	return ret;
> +
> +err_rpm_put:
> +	pm_runtime_put(&client->dev);
> +err_unlock:
> +	mutex_unlock(&ov13b->mutex);
> +
> +	return ret;
> +}
> +
> +static int __maybe_unused ov13b10_suspend(struct device *dev) {
> +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct ov13b10 *ov13b = to_ov13b10(sd);
> +
> +	if (ov13b->streaming)
> +		ov13b10_stop_streaming(ov13b);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused ov13b10_resume(struct device *dev) {
> +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct ov13b10 *ov13b = to_ov13b10(sd);
> +	int ret;
> +
> +	if (ov13b->streaming) {
> +		ret = ov13b10_start_streaming(ov13b);
> +		if (ret)
> +			goto error;
> +	}
> +
> +	return 0;
> +
> +error:
> +	ov13b10_stop_streaming(ov13b);
> +	ov13b->streaming = false;
> +	return ret;
> +}
> +
> +/* Verify chip ID */
> +static int ov13b10_identify_module(struct ov13b10 *ov13b) {
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
> +	int ret;
> +	u32 val;
> +
> +	ret = ov13b10_read_reg(ov13b, OV13B10_REG_CHIP_ID,
> +			       OV13B10_REG_VALUE_24BIT, &val);
> +	if (ret)
> +		return ret;
> +
> +	if (val != OV13B10_CHIP_ID) {
> +		dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
> +			OV13B10_CHIP_ID, val);
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_video_ops ov13b10_video_ops = {
> +	.s_stream = ov13b10_set_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops ov13b10_pad_ops = {
> +	.enum_mbus_code = ov13b10_enum_mbus_code,
> +	.get_fmt = ov13b10_get_pad_format,
> +	.set_fmt = ov13b10_set_pad_format,
> +	.enum_frame_size = ov13b10_enum_frame_size, };
> +
> +static const struct v4l2_subdev_ops ov13b10_subdev_ops = {
> +	.video = &ov13b10_video_ops,
> +	.pad = &ov13b10_pad_ops,
> +};
> +
> +static const struct media_entity_operations ov13b10_subdev_entity_ops = {
> +	.link_validate = v4l2_subdev_link_validate, };
> +
> +static const struct v4l2_subdev_internal_ops ov13b10_internal_ops = {
> +	.open = ov13b10_open,
> +};
> +
> +/* Initialize control handlers */
> +static int ov13b10_init_controls(struct ov13b10 *ov13b) {
> +	struct i2c_client *client = v4l2_get_subdevdata(&ov13b->sd);
> +	struct v4l2_fwnode_device_properties props;
> +	struct v4l2_ctrl_handler *ctrl_hdlr;
> +	s64 exposure_max;
> +	s64 vblank_def;
> +	s64 vblank_min;
> +	s64 hblank;
> +	s64 pixel_rate_min;
> +	s64 pixel_rate_max;
> +	const struct ov13b10_mode *mode;
> +	int ret;
> +
> +	ctrl_hdlr = &ov13b->ctrl_handler;
> +	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10);
> +	if (ret)
> +		return ret;
> +
> +	mutex_init(&ov13b->mutex);
> +	ctrl_hdlr->lock = &ov13b->mutex;
> +	ov13b->link_freq = v4l2_ctrl_new_int_menu(
> +				ctrl_hdlr,
> +				&ov13b10_ctrl_ops,
> +				V4L2_CID_LINK_FREQ,
> +				OV13B10_NUM_OF_LINK_FREQS - 1,
> +				0,
> +				link_freq_menu_items);
> +	if (ov13b->link_freq)
> +		ov13b->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]);
> +	pixel_rate_min = 0;
> +	/* By default, PIXEL_RATE is read only */
> +	ov13b->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops,
> +					      V4L2_CID_PIXEL_RATE,
> +					      pixel_rate_min, pixel_rate_max,
> +					      1, pixel_rate_max);
> +
> +	mode = ov13b->cur_mode;
> +	vblank_def = mode->vts_def - mode->height;
> +	vblank_min = mode->vts_min - mode->height;
> +	ov13b->vblank = v4l2_ctrl_new_std(
> +				ctrl_hdlr, &ov13b10_ctrl_ops, V4L2_CID_VBLANK,
> +				vblank_min, OV13B10_VTS_MAX - mode->height, 1,
> +				vblank_def);
> +
> +	hblank = link_freq_configs[mode->link_freq_index].pixels_per_line -
> +		 mode->width;
> +	ov13b->hblank = v4l2_ctrl_new_std(
> +				ctrl_hdlr, &ov13b10_ctrl_ops, V4L2_CID_HBLANK,
> +				hblank, hblank, 1, hblank);
> +	if (ov13b->hblank)
> +		ov13b->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	exposure_max = mode->vts_def - 8;
> +	ov13b->exposure = v4l2_ctrl_new_std(
> +				ctrl_hdlr, &ov13b10_ctrl_ops,
> +				V4L2_CID_EXPOSURE, OV13B10_EXPOSURE_MIN,
> +				exposure_max, OV13B10_EXPOSURE_STEP,
> +				exposure_max);
> +
> +	v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
> +			  OV13B10_ANA_GAIN_MIN, OV13B10_ANA_GAIN_MAX,
> +			  OV13B10_ANA_GAIN_STEP, OV13B10_ANA_GAIN_DEFAULT);
> +
> +	/* Digital gain */
> +	v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
> +			  OV13B10_DGTL_GAIN_MIN, OV13B10_DGTL_GAIN_MAX,
> +			  OV13B10_DGTL_GAIN_STEP, OV13B10_DGTL_GAIN_DEFAULT);
> +
> +	v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &ov13b10_ctrl_ops,
> +				     V4L2_CID_TEST_PATTERN,
> +				     ARRAY_SIZE(ov13b10_test_pattern_menu) - 1,
> +				     0, 0, ov13b10_test_pattern_menu);
> +
> +	v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops,
> +			  V4L2_CID_HFLIP, 0, 1, 1, 0);
> +	v4l2_ctrl_new_std(ctrl_hdlr, &ov13b10_ctrl_ops,
> +			  V4L2_CID_VFLIP, 0, 1, 1, 0);
> +
> +	if (ctrl_hdlr->error) {
> +		ret = ctrl_hdlr->error;
> +		dev_err(&client->dev, "%s control init failed (%d)\n",
> +			__func__, ret);
> +		goto error;
> +	}
> +
> +	ret = v4l2_fwnode_device_parse(&client->dev, &props);
> +	if (ret)
> +		goto error;
> +
> +	ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &ov13b10_ctrl_ops,
> +					      &props);
> +	if (ret)
> +		goto error;
> +
> +	ov13b->sd.ctrl_handler = ctrl_hdlr;
> +
> +	return 0;
> +
> +error:
> +	v4l2_ctrl_handler_free(ctrl_hdlr);
> +	mutex_destroy(&ov13b->mutex);
> +
> +	return ret;
> +}
> +
> +static void ov13b10_free_controls(struct ov13b10 *ov13b) {
> +	v4l2_ctrl_handler_free(ov13b->sd.ctrl_handler);
> +	mutex_destroy(&ov13b->mutex);
> +}
> +
> +static int ov13b10_probe(struct i2c_client *client) {
> +	struct ov13b10 *ov13b;
> +	int ret;
> +	u32 val = 0;
> +
> +	device_property_read_u32(&client->dev, "clock-frequency", &val);
> +	if (val != 19200000)
> +		return -EINVAL;
> +
> +	ov13b = devm_kzalloc(&client->dev, sizeof(*ov13b), GFP_KERNEL);
> +	if (!ov13b)
> +		return -ENOMEM;
> +
> +	/* Initialize subdev */
> +	v4l2_i2c_subdev_init(&ov13b->sd, client, &ov13b10_subdev_ops);
> +
> +	/* Check module identity */
> +	ret = ov13b10_identify_module(ov13b);
> +	if (ret) {
> +		dev_err(&client->dev, "failed to find sensor: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* Set default mode to max resolution */
> +	ov13b->cur_mode = &supported_modes[0];
> +
> +	ret = ov13b10_init_controls(ov13b);
> +	if (ret)
> +		return ret;
> +
> +	/* Initialize subdev */
> +	ov13b->sd.internal_ops = &ov13b10_internal_ops;
> +	ov13b->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	ov13b->sd.entity.ops = &ov13b10_subdev_entity_ops;
> +	ov13b->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +
> +	/* Initialize source pad */
> +	ov13b->pad.flags = MEDIA_PAD_FL_SOURCE;
> +	ret = media_entity_pads_init(&ov13b->sd.entity, 1, &ov13b->pad);
> +	if (ret) {
> +		dev_err(&client->dev, "%s failed:%d\n", __func__, ret);
> +		goto error_handler_free;
> +	}
> +
> +	ret = v4l2_async_register_subdev_sensor(&ov13b->sd);
> +	if (ret < 0)
> +		goto error_media_entity;
> +
> +	/*
> +	 * Device is already turned on by i2c-core with ACPI domain PM.
> +	 * Enable runtime PM and turn off the device.
> +	 */
> +	pm_runtime_set_active(&client->dev);
> +	pm_runtime_enable(&client->dev);
> +	pm_runtime_idle(&client->dev);
> +
> +	return 0;
> +
> +error_media_entity:
> +	media_entity_cleanup(&ov13b->sd.entity);
> +
> +error_handler_free:
> +	ov13b10_free_controls(ov13b);
> +	dev_err(&client->dev, "%s failed:%d\n", __func__, ret);
> +
> +	return ret;
> +}
> +
> +static int ov13b10_remove(struct i2c_client *client) {
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct ov13b10 *ov13b = to_ov13b10(sd);
> +
> +	v4l2_async_unregister_subdev(sd);
> +	media_entity_cleanup(&sd->entity);
> +	ov13b10_free_controls(ov13b);
> +
> +	pm_runtime_disable(&client->dev);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id ov13b10_id_table[] = {
> +	{"ov13b10", 0},
> +	{},
> +};

You can drop this table.

> +
> +MODULE_DEVICE_TABLE(i2c, ov13b10_id_table);
> +
> +static const struct dev_pm_ops ov13b10_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(ov13b10_suspend, ov13b10_resume) };
> +
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id ov13b10_acpi_ids[] = {
> +	{"OVTIDB10"},
> +	{ /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(acpi, ov13b10_acpi_ids); #endif
> +
> +static struct i2c_driver ov13b10_i2c_driver = {
> +	.driver = {
> +		.name = "ov13b10",
> +		.pm = &ov13b10_pm_ops,
> +		.acpi_match_table = ACPI_PTR(ov13b10_acpi_ids),
> +	},
> +	.probe_new = ov13b10_probe,
> +	.remove = ov13b10_remove,
> +	.id_table = ov13b10_id_table,
> +};
> +
> +module_i2c_driver(ov13b10_i2c_driver);
> +
> +MODULE_AUTHOR("Kao, Arec <arec.kao@intel.com>"); 
> +MODULE_DESCRIPTION("Omnivision ov13b10 sensor driver"); 
> +MODULE_LICENSE("GPL v2");

--
Kind regards,

Sakari Ailus

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH] Add sensor driver support for the ov13b10 camera.
  2021-08-12  3:38   ` Kao, Arec
@ 2021-08-12  6:39     ` Sakari Ailus
  0 siblings, 0 replies; 4+ messages in thread
From: Sakari Ailus @ 2021-08-12  6:39 UTC (permalink / raw)
  To: Kao, Arec; +Cc: linux-media, Yeh, Andy, Chang, Wei Shun

Hi Arec,

On Thu, Aug 12, 2021 at 03:38:55AM +0000, Kao, Arec wrote:
> Hi Sakari,
> 
> Thank you for the nice feedback. I will fix each of your comments on v2
> patch. As regards to your comment: "Does v/hflip change the pixel order
> with this driver btw.?", yes, it does actually change bayer order when
> image flip/mirror and already made some changes with
> increasing/decreasing horizontal/ vertical window offset in v/hflip
> function.

Ok. Almost all sensors require changing the Bayer order but some drivers
just shift the crop window by one pixel. Either is fine, as long as it is
taken care of so that the sensor produces pixels in the order the driver
indicates.

-- 
Regards,

Sakari Ailus

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2021-08-12  6:40 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-11 10:24 [PATCH] Add sensor driver support for the ov13b10 camera Arec Kao
2021-08-11 10:40 ` Sakari Ailus
2021-08-12  3:38   ` Kao, Arec
2021-08-12  6:39     ` Sakari Ailus

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).