[PATCH AUTOSEL 5.10 004/176] media: dib8000: rewrite the init prbs logic

[PATCH AUTOSEL 5.10 004/176] media: dib8000: rewrite the init prbs logic

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 8db11aebdb8f93f46a8513c22c9bd52fa23263aa ]

The logic at dib8000_get_init_prbs() has a few issues:

1. the tables used there has an extra unused value at the beginning;
2. the dprintk() message doesn't write the right value when
   transmission mode is not 8K;
3. the array overflow validation is done by the callers.

Rewrite the code to fix such issues.

This should also shut up those smatch warnings:

	drivers/media/dvb-frontends/dib8000.c:2125 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_8k' 14 <= 14
	drivers/media/dvb-frontends/dib8000.c:2129 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_2k' 14 <= 14
	drivers/media/dvb-frontends/dib8000.c:2131 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_4k' 14 <= 14
	drivers/media/dvb-frontends/dib8000.c:2134 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_8k' 14 <= 14

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-frontends/dib8000.c | 58 +++++++++++++++++++--------
 1 file changed, 41 insertions(+), 17 deletions(-)

diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c
index 082796534b0a..bb02354a48b8 100644
--- a/drivers/media/dvb-frontends/dib8000.c
+++ b/drivers/media/dvb-frontends/dib8000.c
@@ -2107,32 +2107,55 @@ static void dib8000_load_ana_fe_coefs(struct dib8000_state *state, const s16 *an
 			dib8000_write_word(state, 117 + mode, ana_fe[mode]);
 }
 
-static const u16 lut_prbs_2k[14] = {
-	0, 0x423, 0x009, 0x5C7, 0x7A6, 0x3D8, 0x527, 0x7FF, 0x79B, 0x3D6, 0x3A2, 0x53B, 0x2F4, 0x213
+static const u16 lut_prbs_2k[13] = {
+	0x423, 0x009, 0x5C7,
+	0x7A6, 0x3D8, 0x527,
+	0x7FF, 0x79B, 0x3D6,
+	0x3A2, 0x53B, 0x2F4,
+	0x213
 };
-static const u16 lut_prbs_4k[14] = {
-	0, 0x208, 0x0C3, 0x7B9, 0x423, 0x5C7, 0x3D8, 0x7FF, 0x3D6, 0x53B, 0x213, 0x029, 0x0D0, 0x48E
+
+static const u16 lut_prbs_4k[13] = {
+	0x208, 0x0C3, 0x7B9,
+	0x423, 0x5C7, 0x3D8,
+	0x7FF, 0x3D6, 0x53B,
+	0x213, 0x029, 0x0D0,
+	0x48E
 };
-static const u16 lut_prbs_8k[14] = {
-	0, 0x740, 0x069, 0x7DD, 0x208, 0x7B9, 0x5C7, 0x7FF, 0x53B, 0x029, 0x48E, 0x4C4, 0x367, 0x684
+
+static const u16 lut_prbs_8k[13] = {
+	0x740, 0x069, 0x7DD,
+	0x208, 0x7B9, 0x5C7,
+	0x7FF, 0x53B, 0x029,
+	0x48E, 0x4C4, 0x367,
+	0x684
 };
 
 static u16 dib8000_get_init_prbs(struct dib8000_state *state, u16 subchannel)
 {
 	int sub_channel_prbs_group = 0;
+	int prbs_group;
 
-	sub_channel_prbs_group = (subchannel / 3) + 1;
-	dprintk("sub_channel_prbs_group = %d , subchannel =%d prbs = 0x%04x\n", sub_channel_prbs_group, subchannel, lut_prbs_8k[sub_channel_prbs_group]);
+	sub_channel_prbs_group = subchannel / 3;
+	if (sub_channel_prbs_group >= ARRAY_SIZE(lut_prbs_2k))
+		return 0;
 
 	switch (state->fe[0]->dtv_property_cache.transmission_mode) {
 	case TRANSMISSION_MODE_2K:
-			return lut_prbs_2k[sub_channel_prbs_group];
+		prbs_group = lut_prbs_2k[sub_channel_prbs_group];
+		break;
 	case TRANSMISSION_MODE_4K:
-			return lut_prbs_4k[sub_channel_prbs_group];
+		prbs_group =  lut_prbs_4k[sub_channel_prbs_group];
+		break;
 	default:
 	case TRANSMISSION_MODE_8K:
-			return lut_prbs_8k[sub_channel_prbs_group];
+		prbs_group = lut_prbs_8k[sub_channel_prbs_group];
 	}
+
+	dprintk("sub_channel_prbs_group = %d , subchannel =%d prbs = 0x%04x\n",
+		sub_channel_prbs_group, subchannel, prbs_group);
+
+	return prbs_group;
 }
 
 static void dib8000_set_13seg_channel(struct dib8000_state *state)
@@ -2409,10 +2432,8 @@ static void dib8000_set_isdbt_common_channel(struct dib8000_state *state, u8 seq
 	/* TSB or ISDBT ? apply it now */
 	if (c->isdbt_sb_mode) {
 		dib8000_set_sb_channel(state);
-		if (c->isdbt_sb_subchannel < 14)
-			init_prbs = dib8000_get_init_prbs(state, c->isdbt_sb_subchannel);
-		else
-			init_prbs = 0;
+		init_prbs = dib8000_get_init_prbs(state,
+						  c->isdbt_sb_subchannel);
 	} else {
 		dib8000_set_13seg_channel(state);
 		init_prbs = 0xfff;
@@ -3004,6 +3025,7 @@ static int dib8000_tune(struct dvb_frontend *fe)
 
 	unsigned long *timeout = &state->timeout;
 	unsigned long now = jiffies;
+	u16 init_prbs;
 #ifdef DIB8000_AGC_FREEZE
 	u16 agc1, agc2;
 #endif
@@ -3302,8 +3324,10 @@ static int dib8000_tune(struct dvb_frontend *fe)
 		break;
 
 	case CT_DEMOD_STEP_11:  /* 41 : init prbs autosearch */
-		if (state->subchannel <= 41) {
-			dib8000_set_subchannel_prbs(state, dib8000_get_init_prbs(state, state->subchannel));
+		init_prbs = dib8000_get_init_prbs(state, state->subchannel);
+
+		if (init_prbs) {
+			dib8000_set_subchannel_prbs(state, init_prbs);
 			*tune_state = CT_DEMOD_STEP_9;
 		} else {
 			*tune_state = CT_DEMOD_STOP;
-- 
2.30.2

[PATCH AUTOSEL 5.10 033/176] media: hantro: vp8: Move noisy WARN_ON to vpu_debug

[Sasha Levin]

From: Ezequiel Garcia <ezequiel@collabora.com>

[ Upstream commit 6ad61a7847da09b6261824accb539d05bcdfef65 ]

When the VP8 decoders can't find a reference frame,
the driver falls back to the current output frame.

This will probably produce some undesirable results,
leading to frame corruption, but shouldn't cause
noisy warnings.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/hantro/hantro_g1_vp8_dec.c    | 13 ++++++++++---
 .../staging/media/hantro/rk3399_vpu_hw_vp8_dec.c    | 13 ++++++++++---
 2 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/media/hantro/hantro_g1_vp8_dec.c b/drivers/staging/media/hantro/hantro_g1_vp8_dec.c
index a5cdf150cd16..d30bdc678cc2 100644
--- a/drivers/staging/media/hantro/hantro_g1_vp8_dec.c
+++ b/drivers/staging/media/hantro/hantro_g1_vp8_dec.c
@@ -377,12 +377,17 @@ static void cfg_ref(struct hantro_ctx *ctx,
 	vb2_dst = hantro_get_dst_buf(ctx);
 
 	ref = hantro_get_ref(ctx, hdr->last_frame_ts);
-	if (!ref)
+	if (!ref) {
+		vpu_debug(0, "failed to find last frame ts=%llu\n",
+			  hdr->last_frame_ts);
 		ref = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
+	}
 	vdpu_write_relaxed(vpu, ref, G1_REG_ADDR_REF(0));
 
 	ref = hantro_get_ref(ctx, hdr->golden_frame_ts);
-	WARN_ON(!ref && hdr->golden_frame_ts);
+	if (!ref && hdr->golden_frame_ts)
+		vpu_debug(0, "failed to find golden frame ts=%llu\n",
+			  hdr->golden_frame_ts);
 	if (!ref)
 		ref = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
 	if (hdr->flags & V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_GOLDEN)
@@ -390,7 +395,9 @@ static void cfg_ref(struct hantro_ctx *ctx,
 	vdpu_write_relaxed(vpu, ref, G1_REG_ADDR_REF(4));
 
 	ref = hantro_get_ref(ctx, hdr->alt_frame_ts);
-	WARN_ON(!ref && hdr->alt_frame_ts);
+	if (!ref && hdr->alt_frame_ts)
+		vpu_debug(0, "failed to find alt frame ts=%llu\n",
+			  hdr->alt_frame_ts);
 	if (!ref)
 		ref = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
 	if (hdr->flags & V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_ALT)
diff --git a/drivers/staging/media/hantro/rk3399_vpu_hw_vp8_dec.c b/drivers/staging/media/hantro/rk3399_vpu_hw_vp8_dec.c
index a4a792f00b11..5b8c8fc49cce 100644
--- a/drivers/staging/media/hantro/rk3399_vpu_hw_vp8_dec.c
+++ b/drivers/staging/media/hantro/rk3399_vpu_hw_vp8_dec.c
@@ -454,12 +454,17 @@ static void cfg_ref(struct hantro_ctx *ctx,
 	vb2_dst = hantro_get_dst_buf(ctx);
 
 	ref = hantro_get_ref(ctx, hdr->last_frame_ts);
-	if (!ref)
+	if (!ref) {
+		vpu_debug(0, "failed to find last frame ts=%llu\n",
+			  hdr->last_frame_ts);
 		ref = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
+	}
 	vdpu_write_relaxed(vpu, ref, VDPU_REG_VP8_ADDR_REF0);
 
 	ref = hantro_get_ref(ctx, hdr->golden_frame_ts);
-	WARN_ON(!ref && hdr->golden_frame_ts);
+	if (!ref && hdr->golden_frame_ts)
+		vpu_debug(0, "failed to find golden frame ts=%llu\n",
+			  hdr->golden_frame_ts);
 	if (!ref)
 		ref = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
 	if (hdr->flags & V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_GOLDEN)
@@ -467,7 +472,9 @@ static void cfg_ref(struct hantro_ctx *ctx,
 	vdpu_write_relaxed(vpu, ref, VDPU_REG_VP8_ADDR_REF2_5(2));
 
 	ref = hantro_get_ref(ctx, hdr->alt_frame_ts);
-	WARN_ON(!ref && hdr->alt_frame_ts);
+	if (!ref && hdr->alt_frame_ts)
+		vpu_debug(0, "failed to find alt frame ts=%llu\n",
+			  hdr->alt_frame_ts);
 	if (!ref)
 		ref = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
 	if (hdr->flags & V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_ALT)
-- 
2.30.2

[PATCH AUTOSEL 5.10 034/176] media: platform: stm32: unprepare clocks at handling errors in probe

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit 055d2db28ec2fa3ab5c527c5604f1b32b89fa13a ]

stm32_cec_probe() did not unprepare clocks on error handling paths. The
patch fixes that.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/cec/platform/stm32/stm32-cec.c | 26 ++++++++++++++------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/media/cec/platform/stm32/stm32-cec.c b/drivers/media/cec/platform/stm32/stm32-cec.c
index ea4b1ebfca99..0ffd89712536 100644
--- a/drivers/media/cec/platform/stm32/stm32-cec.c
+++ b/drivers/media/cec/platform/stm32/stm32-cec.c
@@ -305,14 +305,16 @@ static int stm32_cec_probe(struct platform_device *pdev)
 
 	cec->clk_hdmi_cec = devm_clk_get(&pdev->dev, "hdmi-cec");
 	if (IS_ERR(cec->clk_hdmi_cec) &&
-	    PTR_ERR(cec->clk_hdmi_cec) == -EPROBE_DEFER)
-		return -EPROBE_DEFER;
+	    PTR_ERR(cec->clk_hdmi_cec) == -EPROBE_DEFER) {
+		ret = -EPROBE_DEFER;
+		goto err_unprepare_cec_clk;
+	}
 
 	if (!IS_ERR(cec->clk_hdmi_cec)) {
 		ret = clk_prepare(cec->clk_hdmi_cec);
 		if (ret) {
 			dev_err(&pdev->dev, "Can't prepare hdmi-cec clock\n");
-			return ret;
+			goto err_unprepare_cec_clk;
 		}
 	}
 
@@ -324,19 +326,27 @@ static int stm32_cec_probe(struct platform_device *pdev)
 			CEC_NAME, caps,	CEC_MAX_LOG_ADDRS);
 	ret = PTR_ERR_OR_ZERO(cec->adap);
 	if (ret)
-		return ret;
+		goto err_unprepare_hdmi_cec_clk;
 
 	ret = cec_register_adapter(cec->adap, &pdev->dev);
-	if (ret) {
-		cec_delete_adapter(cec->adap);
-		return ret;
-	}
+	if (ret)
+		goto err_delete_adapter;
 
 	cec_hw_init(cec);
 
 	platform_set_drvdata(pdev, cec);
 
 	return 0;
+
+err_delete_adapter:
+	cec_delete_adapter(cec->adap);
+
+err_unprepare_hdmi_cec_clk:
+	clk_unprepare(cec->clk_hdmi_cec);
+
+err_unprepare_cec_clk:
+	clk_unprepare(cec->clk_cec);
+	return ret;
 }
 
 static int stm32_cec_remove(struct platform_device *pdev)
-- 
2.30.2

[PATCH AUTOSEL 5.10 035/176] media: atomisp: Fix runtime PM imbalance in atomisp_pci_probe

[Sasha Levin]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 672fe1cf145ab9978c62eb827d6a16aa6b63994b ]

When hmm_pool_register() fails, a pairing PM usage counter
increment is needed to keep the counter balanced. It's the
same for the following error paths.

Link: https://lore.kernel.org/linux-media/20210408081850.24278-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
index 0295e2e32d79..02f774ed80c8 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
@@ -1815,6 +1815,7 @@ static int atomisp_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 	hmm_cleanup();
 	hmm_pool_unregister(HMM_POOL_TYPE_RESERVED);
 hmm_pool_fail:
+	pm_runtime_get_noresume(&pdev->dev);
 	destroy_workqueue(isp->wdt_work_queue);
 wdt_work_queue_fail:
 	atomisp_acc_cleanup(isp);
-- 
2.30.2

[PATCH AUTOSEL 5.10 036/176] media: atomisp: pci: fix error return code in atomisp_pci_probe()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit d14e272958bdfdc40dcafb827d24ba6fdafa9d52 ]

If init_atomisp_wdts() fails, atomisp_pci_probe() need return
error code.

Link: https://lore.kernel.org/linux-media/20210617072329.1233662-1-yangyingliang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
index 02f774ed80c8..fa1bd99cd6f1 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
@@ -1763,7 +1763,8 @@ static int atomisp_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 	if (err < 0)
 		goto register_entities_fail;
 	/* init atomisp wdts */
-	if (init_atomisp_wdts(isp) != 0)
+	err = init_atomisp_wdts(isp);
+	if (err != 0)
 		goto wdt_work_queue_fail;
 
 	/* save the iunit context only once after all the values are init'ed. */
-- 
2.30.2

[PATCH AUTOSEL 5.10 073/176] media: imx258: Rectify mismatch of VTS value

[Sasha Levin]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit 51f93add3669f1b1f540de1cf397815afbd4c756 ]

The frame_length_lines (0x0340) registers are hard-coded as follows:

- 4208x3118
  frame_length_lines = 0x0c50

- 2104x1560
  frame_length_lines = 0x0638

- 1048x780
  frame_length_lines = 0x034c

The driver exposes the V4L2_CID_VBLANK control in read-only mode and
sets its value to vts_def - height, where vts_def is a mode-dependent
value coming from the supported_modes array. It is set using one of
the following macros defined in the driver:

  #define IMX258_VTS_30FPS                0x0c98
  #define IMX258_VTS_30FPS_2K             0x0638
  #define IMX258_VTS_30FPS_VGA            0x034c

There's a clear mismatch in the value for the full resolution mode i.e.
IMX258_VTS_30FPS. Fix it by rectifying the macro with the value set for
the frame_length_lines register as stated above.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/imx258.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
index ccb55fd1d506..c0a691a73ec9 100644
--- a/drivers/media/i2c/imx258.c
+++ b/drivers/media/i2c/imx258.c
@@ -22,7 +22,7 @@
 #define IMX258_CHIP_ID			0x0258
 
 /* V_TIMING internal */
-#define IMX258_VTS_30FPS		0x0c98
+#define IMX258_VTS_30FPS		0x0c50
 #define IMX258_VTS_30FPS_2K		0x0638
 #define IMX258_VTS_30FPS_VGA		0x034c
 #define IMX258_VTS_MAX			0xffff
-- 
2.30.2

[PATCH AUTOSEL 5.10 074/176] media: imx258: Limit the max analogue gain to 480

[Sasha Levin]

From: Umang Jain <umang.jain@ideasonboard.com>

[ Upstream commit f809665ee75fff3f4ea8907f406a66d380aeb184 ]

The range for analog gain mentioned in the datasheet is [0, 480].
The real gain formula mentioned in the datasheet is:

	Gain = 512 / (512 – X)

Hence, values larger than 511 clearly makes no sense. The gain
register field is also documented to be of 9-bits in the datasheet.

Certainly, it is enough to infer that, the kernel driver currently
advertises an arbitrary analog gain max. Fix it by rectifying the
value as per the data sheet i.e. 480.

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/imx258.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
index c0a691a73ec9..e6104ee97ed2 100644
--- a/drivers/media/i2c/imx258.c
+++ b/drivers/media/i2c/imx258.c
@@ -46,7 +46,7 @@
 /* Analog gain control */
 #define IMX258_REG_ANALOG_GAIN		0x0204
 #define IMX258_ANA_GAIN_MIN		0
-#define IMX258_ANA_GAIN_MAX		0x1fff
+#define IMX258_ANA_GAIN_MAX		480
 #define IMX258_ANA_GAIN_STEP		1
 #define IMX258_ANA_GAIN_DEFAULT		0x0
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 075/176] media: v4l2-dv-timings.c: fix wrong condition in two for-loops

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 4108b3e6db31acc4c68133290bbcc87d4db905c9 ]

These for-loops should test against v4l2_dv_timings_presets[i].bt.width,
not if i < v4l2_dv_timings_presets[i].bt.width. Luckily nothing ever broke,
since the smallest width is still a lot higher than the total number of
presets, but it is wrong.

The last item in the presets array is all 0, so the for-loop must stop
when it reaches that sentinel.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/v4l2-dv-timings.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-dv-timings.c b/drivers/media/v4l2-core/v4l2-dv-timings.c
index 230d65a64217..af48705c704f 100644
--- a/drivers/media/v4l2-core/v4l2-dv-timings.c
+++ b/drivers/media/v4l2-core/v4l2-dv-timings.c
@@ -196,7 +196,7 @@ bool v4l2_find_dv_timings_cap(struct v4l2_dv_timings *t,
 	if (!v4l2_valid_dv_timings(t, cap, fnc, fnc_handle))
 		return false;
 
-	for (i = 0; i < v4l2_dv_timings_presets[i].bt.width; i++) {
+	for (i = 0; v4l2_dv_timings_presets[i].bt.width; i++) {
 		if (v4l2_valid_dv_timings(v4l2_dv_timings_presets + i, cap,
 					  fnc, fnc_handle) &&
 		    v4l2_match_dv_timings(t, v4l2_dv_timings_presets + i,
@@ -218,7 +218,7 @@ bool v4l2_find_dv_timings_cea861_vic(struct v4l2_dv_timings *t, u8 vic)
 {
 	unsigned int i;
 
-	for (i = 0; i < v4l2_dv_timings_presets[i].bt.width; i++) {
+	for (i = 0; v4l2_dv_timings_presets[i].bt.width; i++) {
 		const struct v4l2_bt_timings *bt =
 			&v4l2_dv_timings_presets[i].bt;
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 076/176] media: TDA1997x: fix tda1997x_query_dv_timings() return value

[Sasha Levin]

From: Krzysztof Hałasa <khalasa@piap.pl>

[ Upstream commit 7dee1030871a48d4f3c5a74227a4b4188463479a ]

Correctly propagate the tda1997x_detect_std error value.

Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/tda1997x.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/tda1997x.c b/drivers/media/i2c/tda1997x.c
index 89bb7e6dc7a4..258b51d8bcbc 100644
--- a/drivers/media/i2c/tda1997x.c
+++ b/drivers/media/i2c/tda1997x.c
@@ -1695,14 +1695,15 @@ static int tda1997x_query_dv_timings(struct v4l2_subdev *sd,
 				     struct v4l2_dv_timings *timings)
 {
 	struct tda1997x_state *state = to_state(sd);
+	int ret;
 
 	v4l_dbg(1, debug, state->client, "%s\n", __func__);
 	memset(timings, 0, sizeof(struct v4l2_dv_timings));
 	mutex_lock(&state->lock);
-	tda1997x_detect_std(state, timings);
+	ret = tda1997x_detect_std(state, timings);
 	mutex_unlock(&state->lock);
 
-	return 0;
+	return ret;
 }
 
 static const struct v4l2_subdev_video_ops tda1997x_video_ops = {
-- 
2.30.2

[PATCH AUTOSEL 5.10 077/176] media: tegra-cec: Handle errors of clk_prepare_enable()

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit 38367073c796a37a61549b1f66a71b3adb03802d ]

tegra_cec_probe() and tegra_cec_resume() ignored possible errors of
clk_prepare_enable(). The patch fixes this.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/cec/platform/tegra/tegra_cec.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/media/cec/platform/tegra/tegra_cec.c b/drivers/media/cec/platform/tegra/tegra_cec.c
index 1ac0c70a5981..5e907395ca2e 100644
--- a/drivers/media/cec/platform/tegra/tegra_cec.c
+++ b/drivers/media/cec/platform/tegra/tegra_cec.c
@@ -366,7 +366,11 @@ static int tegra_cec_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	clk_prepare_enable(cec->clk);
+	ret = clk_prepare_enable(cec->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to prepare clock for CEC\n");
+		return ret;
+	}
 
 	/* set context info. */
 	cec->dev = &pdev->dev;
@@ -446,9 +450,7 @@ static int tegra_cec_resume(struct platform_device *pdev)
 
 	dev_notice(&pdev->dev, "Resuming\n");
 
-	clk_prepare_enable(cec->clk);
-
-	return 0;
+	return clk_prepare_enable(cec->clk);
 }
 #endif
 
-- 
2.30.2