From: Daniel Scally <dan.scally@ideasonboard.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: jacopo.mondi@ideasonboard.com, nayden.kanchev@arm.com,
robh+dt@kernel.org, mchehab@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
jerome.forissier@linaro.org, kieran.bingham@ideasonboard.com,
laurent.pinchart@ideasonboard.com,
Daniel Scally <dan.scally@ideasonboard.com>
Subject: [PATCH 1/5] media: uapi: Add MEDIA_BUS_FMT_RGB202020_1X60 format code
Date: Wed, 31 Jan 2024 16:47:05 +0000 [thread overview]
Message-ID: <20240131164709.810587-2-dan.scally@ideasonboard.com> (raw)
In-Reply-To: <20240131164709.810587-1-dan.scally@ideasonboard.com>
The Mali-C55 ISP by ARM requires 20-bits per colour channel input on
the bus. Add a new media bus format code to represent it.
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
---
.../media/v4l/subdev-formats.rst | 168 ++++++++++++++++++
include/uapi/linux/media-bus-format.h | 3 +-
2 files changed, 170 insertions(+), 1 deletion(-)
diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst
index eb3cd20b0cf2..269b61926855 100644
--- a/Documentation/userspace-api/media/v4l/subdev-formats.rst
+++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst
@@ -2223,6 +2223,174 @@ The following table list existing packed 48bit wide RGB formats.
\endgroup
+The following table list existing packed 60bit wide RGB formats.
+
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+.. _v4l2-mbus-pixelcode-rgb-60:
+
+.. raw:: latex
+
+ \begingroup
+ \tiny
+ \setlength{\tabcolsep}{2pt}
+
+.. flat-table:: 60bit RGB formats
+ :header-rows: 3
+ :stub-columns: 0
+ :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+
+ * - Identifier
+ - Code
+ -
+ - :cspan:`31` Data organization
+ * -
+ -
+ - Bit
+ -
+ -
+ -
+ -
+ - 59
+ - 58
+ - 57
+ - 56
+ - 55
+ - 54
+ - 53
+ - 52
+ - 51
+ - 50
+ - 49
+ - 48
+ - 47
+ - 46
+ - 45
+ - 44
+ - 43
+ - 42
+ - 41
+ - 40
+ - 39
+ - 38
+ - 37
+ - 36
+ - 35
+ - 34
+ - 33
+ - 32
+ * -
+ -
+ -
+ - 31
+ - 30
+ - 29
+ - 28
+ - 27
+ - 26
+ - 25
+ - 24
+ - 23
+ - 22
+ - 21
+ - 20
+ - 19
+ - 18
+ - 17
+ - 16
+ - 15
+ - 14
+ - 13
+ - 12
+ - 11
+ - 10
+ - 9
+ - 8
+ - 7
+ - 6
+ - 5
+ - 4
+ - 3
+ - 2
+ - 1
+ - 0
+ * .. _MEDIA-BUS-FMT-RGB202020-1X60:
+
+ - MEDIA_BUS_FMT_RGB202020_1X60
+ - 0x1026
+ -
+ -
+ -
+ -
+ -
+ - r\ :sub:`19`
+ - r\ :sub:`18`
+ - r\ :sub:`17`
+ - r\ :sub:`16`
+ - r\ :sub:`15`
+ - r\ :sub:`14`
+ - r\ :sub:`13`
+ - r\ :sub:`12`
+ - r\ :sub:`11`
+ - r\ :sub:`10`
+ - r\ :sub:`8`
+ - r\ :sub:`8`
+ - r\ :sub:`7`
+ - r\ :sub:`6`
+ - r\ :sub:`5`
+ - r\ :sub:`4`
+ - r\ :sub:`3`
+ - r\ :sub:`2`
+ - r\ :sub:`1`
+ - r\ :sub:`0`
+ - g\ :sub:`19`
+ - g\ :sub:`18`
+ - g\ :sub:`17`
+ - g\ :sub:`16`
+ - g\ :sub:`15`
+ - g\ :sub:`14`
+ - g\ :sub:`13`
+ - g\ :sub:`12`
+ * -
+ -
+ -
+ - g\ :sub:`11`
+ - g\ :sub:`10`
+ - g\ :sub:`9`
+ - g\ :sub:`8`
+ - g\ :sub:`7`
+ - g\ :sub:`6`
+ - g\ :sub:`5`
+ - g\ :sub:`4`
+ - g\ :sub:`3`
+ - g\ :sub:`2`
+ - g\ :sub:`1`
+ - g\ :sub:`0`
+ - b\ :sub:`19`
+ - b\ :sub:`18`
+ - b\ :sub:`17`
+ - b\ :sub:`16`
+ - b\ :sub:`15`
+ - b\ :sub:`14`
+ - b\ :sub:`13`
+ - b\ :sub:`12`
+ - b\ :sub:`11`
+ - b\ :sub:`10`
+ - b\ :sub:`9`
+ - b\ :sub:`8`
+ - b\ :sub:`7`
+ - b\ :sub:`6`
+ - b\ :sub:`5`
+ - b\ :sub:`4`
+ - b\ :sub:`3`
+ - b\ :sub:`2`
+ - b\ :sub:`1`
+ - b\ :sub:`0`
+
+.. raw:: latex
+
+ \endgroup
+
On LVDS buses, usually each sample is transferred serialized in seven
time slots per pixel clock, on three (18-bit) or four (24-bit)
differential data pairs at the same time. The remaining bits are used
diff --git a/include/uapi/linux/media-bus-format.h b/include/uapi/linux/media-bus-format.h
index f05f747e444d..8633818cc33c 100644
--- a/include/uapi/linux/media-bus-format.h
+++ b/include/uapi/linux/media-bus-format.h
@@ -34,7 +34,7 @@
#define MEDIA_BUS_FMT_FIXED 0x0001
-/* RGB - next is 0x1026 */
+/* RGB - next is 0x1027 */
#define MEDIA_BUS_FMT_RGB444_1X12 0x1016
#define MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE 0x1001
#define MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE 0x1002
@@ -72,6 +72,7 @@
#define MEDIA_BUS_FMT_RGB888_1X36_CPADLO 0x1021
#define MEDIA_BUS_FMT_RGB121212_1X36 0x1019
#define MEDIA_BUS_FMT_RGB161616_1X48 0x101a
+#define MEDIA_BUS_FMT_RGB202020_1X60 0x1026
/* YUV (including grey) - next is 0x202f */
#define MEDIA_BUS_FMT_Y8_1X8 0x2001
--
2.34.1
next prev parent reply other threads:[~2024-01-31 16:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-31 16:47 [PATCH 0/5] Add Arm Mali-C55 Image Signal Processor Driver Daniel Scally
2024-01-31 16:47 ` Daniel Scally [this message]
2024-01-31 16:47 ` [PATCH 2/5] dt-bindings: media: Add bindings for ARM mali-c55 Daniel Scally
2024-01-31 18:28 ` Rob Herring
2024-02-01 21:53 ` Rob Herring
2024-01-31 16:47 ` [PATCH 3/5] media: mali-c55: Add Mali-C55 ISP driver Daniel Scally
2024-02-01 6:07 ` kernel test robot
2024-02-01 6:48 ` kernel test robot
2024-02-02 18:12 ` kernel test robot
2024-01-31 16:47 ` [PATCH 4/5] media: Documentation: Add Mali-C55 ISP Documentation Daniel Scally
2024-01-31 16:47 ` [PATCH 5/5] MAINTAINERS: Add entry for mali-c55 driver Daniel Scally
2024-01-31 17:43 ` [PATCH 0/5] Add Arm Mali-C55 Image Signal Processor Driver Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240131164709.810587-2-dan.scally@ideasonboard.com \
--to=dan.scally@ideasonboard.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jacopo.mondi@ideasonboard.com \
--cc=jerome.forissier@linaro.org \
--cc=kieran.bingham@ideasonboard.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nayden.kanchev@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).