linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-media@vger.kernel.org
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>,
	David Plowman <david.plowman@raspberrypi.com>,
	Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	Naushir Patuck <naush@raspberrypi.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	kernel-list@raspberrypi.com,
	linux-rpi-kernel@lists.infradead.org,
	Florian Fainelli <florian.fainelli@broadcom.com>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	bcm-kernel-feedback-list@broadcom.com
Subject: [PATCH v7 01/15] media: i2c: imx219: Inline imx219_update_pad_format() in its caller
Date: Mon, 25 Mar 2024 00:08:37 +0200	[thread overview]
Message-ID: <20240324220854.15010-2-laurent.pinchart@ideasonboard.com> (raw)
In-Reply-To: <20240324220854.15010-1-laurent.pinchart@ideasonboard.com>

The imx219_update_pad_format() is short and called from a single place,
in imx219_set_pad_format(). Inline the code in the caller to keep all
format adjustments grouped in a single place and improve readability.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/media/i2c/imx219.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)

diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index e17ef2e9d9d0..3878da50860e 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -758,21 +758,6 @@ static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
 	return ret;
 }
 
-static void imx219_update_pad_format(struct imx219 *imx219,
-				     const struct imx219_mode *mode,
-				     struct v4l2_mbus_framefmt *fmt, u32 code)
-{
-	/* Bayer order varies with flips */
-	fmt->code = imx219_get_format_code(imx219, code);
-	fmt->width = mode->width;
-	fmt->height = mode->height;
-	fmt->field = V4L2_FIELD_NONE;
-	fmt->colorspace = V4L2_COLORSPACE_RAW;
-	fmt->ycbcr_enc = V4L2_YCBCR_ENC_601;
-	fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
-	fmt->xfer_func = V4L2_XFER_FUNC_NONE;
-}
-
 static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
 				 struct v4l2_subdev_state *state,
 				 struct v4l2_subdev_mbus_code_enum *code)
@@ -819,12 +804,23 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
 	struct v4l2_rect *crop;
 	unsigned int bin_h, bin_v;
 
+	/*
+	 * Adjust the requested format to match the closest mode. The Bayer
+	 * order varies with flips.
+	 */
 	mode = v4l2_find_nearest_size(supported_modes,
 				      ARRAY_SIZE(supported_modes),
 				      width, height,
 				      fmt->format.width, fmt->format.height);
 
-	imx219_update_pad_format(imx219, mode, &fmt->format, fmt->format.code);
+	fmt->format.code = imx219_get_format_code(imx219, fmt->format.code);
+	fmt->format.width = mode->width;
+	fmt->format.height = mode->height;
+	fmt->format.field = V4L2_FIELD_NONE;
+	fmt->format.colorspace = V4L2_COLORSPACE_RAW;
+	fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_601;
+	fmt->format.quantization = V4L2_QUANTIZATION_FULL_RANGE;
+	fmt->format.xfer_func = V4L2_XFER_FUNC_NONE;
 
 	format = v4l2_subdev_state_get_format(state, 0);
 	*format = fmt->format;
-- 
Regards,

Laurent Pinchart


  reply	other threads:[~2024-03-24 22:09 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-24 22:08 [PATCH v7 00/15] media: Add driver for the Raspberry Pi <5 CSI-2 receiver Laurent Pinchart
2024-03-24 22:08 ` Laurent Pinchart [this message]
2024-03-24 22:08 ` [PATCH v7 02/15] media: i2c: imx219: Add internal image sink pad Laurent Pinchart
2024-03-27  9:51   ` Tomi Valkeinen
2024-03-28 16:09     ` Laurent Pinchart
2024-03-28 16:18       ` Tomi Valkeinen
2024-03-28 16:56         ` Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 03/15] media: i2c: imx219: Report internal routes to userspace Laurent Pinchart
2024-03-27  9:56   ` Tomi Valkeinen
2024-04-04  8:19   ` Tomi Valkeinen
2024-04-04  8:29     ` Sakari Ailus
2024-04-04 10:29       ` Tomi Valkeinen
2024-04-04 10:34       ` Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 04/15] media: i2c: imx219: Report streams using frame descriptors Laurent Pinchart
2024-03-27 10:08   ` Tomi Valkeinen
2024-03-28 17:17     ` Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 05/15] media: i2c: imx219: Add embedded data support Laurent Pinchart
2024-03-26 23:30   ` Sakari Ailus
2024-03-27  0:22     ` Laurent Pinchart
2024-03-27  6:52       ` Sakari Ailus
2024-03-27 10:51   ` Tomi Valkeinen
2024-03-28 21:49     ` Laurent Pinchart
2024-03-29  9:13       ` Tomi Valkeinen
2024-03-24 22:08 ` [PATCH v7 06/15] media: v4l: Add V4L2-PIX-FMT-Y12P format Laurent Pinchart
2024-03-27 11:08   ` Tomi Valkeinen
2024-03-27 11:18     ` Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 07/15] media: v4l: Add V4L2-PIX-FMT-Y14P format Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 08/15] dt-bindings: media: Add bindings for bcm2835-unicam Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 09/15] media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface Laurent Pinchart
2024-03-27 11:21   ` Tomi Valkeinen
2024-04-01 13:52     ` Laurent Pinchart
2024-04-02  6:00       ` Tomi Valkeinen
2024-04-02  6:05         ` Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 10/15] ARM: dts: bcm2835-rpi: Move firmware-clocks from bcm2711 to bcm2835 Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 11/15] ARM: dts: bcm2835: Add Unicam CSI nodes Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 12/15] ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0 Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 13/15] ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0 Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 14/15] ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 15/15] [DNI] arm64: dts: broadcom: Add overlay for Raspberry Pi 4B IMX219 camera Laurent Pinchart
2024-03-25 13:55 ` [PATCH v7 00/15] media: Add driver for the Raspberry Pi <5 CSI-2 receiver Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240324220854.15010-2-laurent.pinchart@ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=david.plowman@raspberrypi.com \
    --cc=florian.fainelli@broadcom.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jeanmichel.hautbois@yoseli.org \
    --cc=kernel-list@raspberrypi.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=naush@raspberrypi.com \
    --cc=rjui@broadcom.com \
    --cc=sakari.ailus@linux.intel.com \
    --cc=sbranden@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).