From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-media@vger.kernel.org
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>,
David Plowman <david.plowman@raspberrypi.com>,
Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>,
Hans Verkuil <hverkuil-cisco@xs4all.nl>,
Naushir Patuck <naush@raspberrypi.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
kernel-list@raspberrypi.com,
linux-rpi-kernel@lists.infradead.org,
Florian Fainelli <florian.fainelli@broadcom.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com
Subject: Re: [PATCH v7 03/15] media: i2c: imx219: Report internal routes to userspace
Date: Wed, 27 Mar 2024 11:56:12 +0200 [thread overview]
Message-ID: <9f31882b-f6f6-4a42-8f6a-4434483d9811@ideasonboard.com> (raw)
In-Reply-To: <20240324220854.15010-4-laurent.pinchart@ideasonboard.com>
On 25/03/2024 00:08, Laurent Pinchart wrote:
> Usage of internal pads creates a route internal to the subdev, and the
> V4L2 camera sensor API requires such routes to be reported to userspace.
> Create the route in the .init_state() operation.
>
> Internal routing support requires stream support, so set the
> V4L2_SUBDEV_FL_HAS_STREAMS flag and switch formats and selection
> rectangles access from pads to streams. As the route is immutable,
No "switch formats and selection rectangles access from pads to stream"
in this patch.
Tomi
> there's no need to implement the .set_routing() operation, and we can
> hardcode the sink and source stream IDs to 0.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
> ---
> Changes since v6:
>
> - Drop change to get format API in imx219_set_ctrl()
> - Fix function name in commit message
> - Set V4L2_SUBDEV_ROUTE_FL_IMMUTABLE flag on route
> ---
> drivers/media/i2c/imx219.c | 24 +++++++++++++++++++++++-
> 1 file changed, 23 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
> index 817bf192e4d9..6602250834be 100644
> --- a/drivers/media/i2c/imx219.c
> +++ b/drivers/media/i2c/imx219.c
> @@ -993,15 +993,36 @@ static int imx219_get_selection(struct v4l2_subdev *sd,
> static int imx219_init_state(struct v4l2_subdev *sd,
> struct v4l2_subdev_state *state)
> {
> + struct v4l2_subdev_route routes[1] = {
> + {
> + .sink_pad = IMX219_PAD_IMAGE,
> + .sink_stream = 0,
> + .source_pad = IMX219_PAD_SOURCE,
> + .source_stream = 0,
> + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE |
> + V4L2_SUBDEV_ROUTE_FL_IMMUTABLE,
> + },
> + };
> + struct v4l2_subdev_krouting routing = {
> + .len_routes = ARRAY_SIZE(routes),
> + .num_routes = ARRAY_SIZE(routes),
> + .routes = routes,
> + };
> struct v4l2_subdev_format fmt = {
> .which = V4L2_SUBDEV_FORMAT_TRY,
> .pad = IMX219_PAD_SOURCE,
> + .stream = 0,
> .format = {
> .code = MEDIA_BUS_FMT_SRGGB10_1X10,
> .width = supported_modes[0].width,
> .height = supported_modes[0].height,
> },
> };
> + int ret;
> +
> + ret = v4l2_subdev_set_routing(sd, state, &routing);
> + if (ret)
> + return ret;
>
> imx219_set_pad_format(sd, state, &fmt);
>
> @@ -1260,7 +1281,8 @@ static int imx219_probe(struct i2c_client *client)
>
> /* Initialize subdev */
> imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> - V4L2_SUBDEV_FL_HAS_EVENTS;
> + V4L2_SUBDEV_FL_HAS_EVENTS |
> + V4L2_SUBDEV_FL_STREAMS;
> imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
>
> /*
next prev parent reply other threads:[~2024-03-27 9:56 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-24 22:08 [PATCH v7 00/15] media: Add driver for the Raspberry Pi <5 CSI-2 receiver Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 01/15] media: i2c: imx219: Inline imx219_update_pad_format() in its caller Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 02/15] media: i2c: imx219: Add internal image sink pad Laurent Pinchart
2024-03-27 9:51 ` Tomi Valkeinen
2024-03-28 16:09 ` Laurent Pinchart
2024-03-28 16:18 ` Tomi Valkeinen
2024-03-28 16:56 ` Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 03/15] media: i2c: imx219: Report internal routes to userspace Laurent Pinchart
2024-03-27 9:56 ` Tomi Valkeinen [this message]
2024-04-04 8:19 ` Tomi Valkeinen
2024-04-04 8:29 ` Sakari Ailus
2024-04-04 10:29 ` Tomi Valkeinen
2024-04-04 10:34 ` Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 04/15] media: i2c: imx219: Report streams using frame descriptors Laurent Pinchart
2024-03-27 10:08 ` Tomi Valkeinen
2024-03-28 17:17 ` Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 05/15] media: i2c: imx219: Add embedded data support Laurent Pinchart
2024-03-26 23:30 ` Sakari Ailus
2024-03-27 0:22 ` Laurent Pinchart
2024-03-27 6:52 ` Sakari Ailus
2024-03-27 10:51 ` Tomi Valkeinen
2024-03-28 21:49 ` Laurent Pinchart
2024-03-29 9:13 ` Tomi Valkeinen
2024-03-24 22:08 ` [PATCH v7 06/15] media: v4l: Add V4L2-PIX-FMT-Y12P format Laurent Pinchart
2024-03-27 11:08 ` Tomi Valkeinen
2024-03-27 11:18 ` Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 07/15] media: v4l: Add V4L2-PIX-FMT-Y14P format Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 08/15] dt-bindings: media: Add bindings for bcm2835-unicam Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 09/15] media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface Laurent Pinchart
2024-03-27 11:21 ` Tomi Valkeinen
2024-04-01 13:52 ` Laurent Pinchart
2024-04-02 6:00 ` Tomi Valkeinen
2024-04-02 6:05 ` Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 10/15] ARM: dts: bcm2835-rpi: Move firmware-clocks from bcm2711 to bcm2835 Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 11/15] ARM: dts: bcm2835: Add Unicam CSI nodes Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 12/15] ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0 Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 13/15] ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0 Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 14/15] ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator Laurent Pinchart
2024-03-24 22:08 ` [PATCH v7 15/15] [DNI] arm64: dts: broadcom: Add overlay for Raspberry Pi 4B IMX219 camera Laurent Pinchart
2024-03-25 13:55 ` [PATCH v7 00/15] media: Add driver for the Raspberry Pi <5 CSI-2 receiver Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9f31882b-f6f6-4a42-8f6a-4434483d9811@ideasonboard.com \
--to=tomi.valkeinen@ideasonboard.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=david.plowman@raspberrypi.com \
--cc=florian.fainelli@broadcom.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jeanmichel.hautbois@yoseli.org \
--cc=kernel-list@raspberrypi.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=naush@raspberrypi.com \
--cc=rjui@broadcom.com \
--cc=sakari.ailus@linux.intel.com \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).