* [PATCH 0/4] em28xx: GPIO registers: extend definitions and remove the caching
@ 2013-06-03 18:12 Frank Schäfer
2013-06-03 18:12 ` [PATCH 1/4] em28xx: extend GPIO register definitions for the em25xx, em276x/7x/8x, em2874/174/84 Frank Schäfer
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Frank Schäfer @ 2013-06-03 18:12 UTC (permalink / raw)
To: mchehab; +Cc: linux-media, Frank Schäfer
The first two patches add some missing GPIO register definitions,
while the third patch is a minor code movement to clean up things.
The fourth patch finally removes the GPIO register caching.
Frank Schäfer (4):
em28xx: extend GPIO register definitions for the em25xx,
em276x/7x/8x, em2874/174/84
em28xx: improve em2820-em2873/83 GPIO port register definitions and
descriptions
em28xx: move snapshot button bit definition for reg 0x0C from
em28xx-input.c to em28xx.h
em28xx: remove GPIO register caching
drivers/media/usb/em28xx/em28xx-cards.c | 220 +++++++++++++++----------------
drivers/media/usb/em28xx/em28xx-core.c | 27 +---
drivers/media/usb/em28xx/em28xx-dvb.c | 68 +++++-----
drivers/media/usb/em28xx/em28xx-input.c | 1 -
drivers/media/usb/em28xx/em28xx-reg.h | 23 +++-
drivers/media/usb/em28xx/em28xx.h | 6 -
6 Dateien geändert, 159 Zeilen hinzugefügt(+), 186 Zeilen entfernt(-)
--
1.7.10.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/4] em28xx: extend GPIO register definitions for the em25xx, em276x/7x/8x, em2874/174/84
2013-06-03 18:12 [PATCH 0/4] em28xx: GPIO registers: extend definitions and remove the caching Frank Schäfer
@ 2013-06-03 18:12 ` Frank Schäfer
2013-06-03 18:12 ` [PATCH 2/4] em28xx: improve em2820-em2873/83 GPIO port register definitions and descriptions Frank Schäfer
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Frank Schäfer @ 2013-06-03 18:12 UTC (permalink / raw)
To: mchehab; +Cc: linux-media, Frank Schäfer
The em25xx/em276x/7x/8x provides 4 GPIO register sets,
each of them consisting of separate read and a write registers.
The same registers are also used by the em2874/174/84.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
---
drivers/media/usb/em28xx/em28xx-cards.c | 88 +++++++++++++++----------------
drivers/media/usb/em28xx/em28xx-dvb.c | 62 +++++++++++-----------
drivers/media/usb/em28xx/em28xx-reg.h | 15 +++++-
3 Dateien geändert, 89 Zeilen hinzugefügt(+), 76 Zeilen entfernt(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 927956b..a2230cc 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -286,14 +286,14 @@ static struct em28xx_reg_seq dikom_dk300_digital[] = {
/* Reset for the most [digital] boards */
static struct em28xx_reg_seq leadership_digital[] = {
- {EM2874_R80_GPIO, 0x70, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq leadership_reset[] = {
- {EM2874_R80_GPIO, 0xf0, 0xff, 10},
- {EM2874_R80_GPIO, 0xb0, 0xff, 10},
- {EM2874_R80_GPIO, 0xf0, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
{ -1, -1, -1, -1},
};
@@ -302,25 +302,25 @@ static struct em28xx_reg_seq leadership_reset[] = {
* GPIO_7 - LED
*/
static struct em28xx_reg_seq pctv_290e[] = {
- {EM2874_R80_GPIO, 0x00, 0xff, 80},
- {EM2874_R80_GPIO, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
- {EM2874_R80_GPIO, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80},
+ {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
{-1, -1, -1, -1},
};
#if 0
static struct em28xx_reg_seq terratec_h5_gpio[] = {
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
- {EM2874_R80_GPIO, 0xf6, 0xff, 100},
- {EM2874_R80_GPIO, 0xf2, 0xff, 50},
- {EM2874_R80_GPIO, 0xf6, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq terratec_h5_digital[] = {
- {EM2874_R80_GPIO, 0xf6, 0xff, 10},
- {EM2874_R80_GPIO, 0xe6, 0xff, 100},
- {EM2874_R80_GPIO, 0xa6, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
{ -1, -1, -1, -1},
};
#endif
@@ -336,39 +336,39 @@ static struct em28xx_reg_seq terratec_h5_digital[] = {
* GPIO_7 - LED (green LED)
*/
static struct em28xx_reg_seq pctv_460e[] = {
- {EM2874_R80_GPIO, 0x01, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50},
{0x0d, 0xff, 0xff, 50},
- {EM2874_R80_GPIO, 0x41, 0xff, 50}, /* GPIO_6=1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */
{0x0d, 0x42, 0xff, 50},
- {EM2874_R80_GPIO, 0x61, 0xff, 50}, /* GPIO_5=1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
- {EM2874_R80_GPIO, 0xff, 0xff, 10},
- {EM2874_R80_GPIO, 0xfd, 0xff, 10}, /* xc5000 reset */
- {EM2874_R80_GPIO, 0xf9, 0xff, 35},
- {EM2874_R80_GPIO, 0xfd, 0xff, 10},
- {EM2874_R80_GPIO, 0xff, 0xff, 10},
- {EM2874_R80_GPIO, 0xfe, 0xff, 10},
- {EM2874_R80_GPIO, 0xbe, 0xff, 10},
- {EM2874_R80_GPIO, 0xfe, 0xff, 20},
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */
+ {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20},
{ -1, -1, -1, -1},
};
#if 0
static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
- {EM2874_R80_GPIO, 0x6f, 0xff, 10},
- {EM2874_R80_GPIO, 0x4f, 0xff, 10}, /* xc5000 reset */
- {EM2874_R80_GPIO, 0x6f, 0xff, 10},
- {EM2874_R80_GPIO, 0x4f, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */
+ {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq hauppauge_930c_digital[] = {
- {EM2874_R80_GPIO, 0xf6, 0xff, 10},
- {EM2874_R80_GPIO, 0xe6, 0xff, 100},
- {EM2874_R80_GPIO, 0xa6, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
{ -1, -1, -1, -1},
};
#endif
@@ -379,9 +379,9 @@ static struct em28xx_reg_seq hauppauge_930c_digital[] = {
* GPIO_7 - LED, 0=active
*/
static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
- {EM2874_R80_GPIO, 0x83, 0xff, 100},
- {EM2874_R80_GPIO, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
- {EM2874_R80_GPIO, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
{-1, -1, -1, -1},
};
@@ -392,9 +392,9 @@ static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
* GPIO_7: LED, 1=active
*/
static struct em28xx_reg_seq pctv_510e[] = {
- {EM2874_R80_GPIO, 0x10, 0xff, 100},
- {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
- {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
{ -1, -1, -1, -1},
};
@@ -405,10 +405,10 @@ static struct em28xx_reg_seq pctv_510e[] = {
* GPIO_7: LED, 1=active
*/
static struct em28xx_reg_seq pctv_520e[] = {
- {EM2874_R80_GPIO, 0x10, 0xff, 100},
- {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
- {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
- {EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
{ -1, -1, -1, -1},
};
@@ -2948,13 +2948,13 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
break;
case CHIP_ID_EM2874:
chip_name = "em2874";
- dev->reg_gpio_num = EM2874_R80_GPIO;
+ dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
case CHIP_ID_EM28174:
chip_name = "em28174";
- dev->reg_gpio_num = EM2874_R80_GPIO;
+ dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
@@ -2964,7 +2964,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
break;
case CHIP_ID_EM2884:
chip_name = "em2884";
- dev->reg_gpio_num = EM2874_R80_GPIO;
+ dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index 42ede68..69aed82 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -421,23 +421,23 @@ static void hauppauge_hvr930c_init(struct em28xx *dev)
int i;
struct em28xx_reg_seq hauppauge_hvr930c_init[] = {
- {EM2874_R80_GPIO, 0xff, 0xff, 0x65},
- {EM2874_R80_GPIO, 0xfb, 0xff, 0x32},
- {EM2874_R80_GPIO, 0xff, 0xff, 0xb8},
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0x65},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfb, 0xff, 0x32},
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0xb8},
{ -1, -1, -1, -1},
};
struct em28xx_reg_seq hauppauge_hvr930c_end[] = {
- {EM2874_R80_GPIO, 0xef, 0xff, 0x01},
- {EM2874_R80_GPIO, 0xaf, 0xff, 0x65},
- {EM2874_R80_GPIO, 0xef, 0xff, 0x76},
- {EM2874_R80_GPIO, 0xef, 0xff, 0x01},
- {EM2874_R80_GPIO, 0xcf, 0xff, 0x0b},
- {EM2874_R80_GPIO, 0xef, 0xff, 0x40},
-
- {EM2874_R80_GPIO, 0xcf, 0xff, 0x65},
- {EM2874_R80_GPIO, 0xef, 0xff, 0x65},
- {EM2874_R80_GPIO, 0xcf, 0xff, 0x0b},
- {EM2874_R80_GPIO, 0xef, 0xff, 0x65},
+ {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x01},
+ {EM2874_R80_GPIO_P0_CTRL, 0xaf, 0xff, 0x65},
+ {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x76},
+ {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x01},
+ {EM2874_R80_GPIO_P0_CTRL, 0xcf, 0xff, 0x0b},
+ {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x40},
+
+ {EM2874_R80_GPIO_P0_CTRL, 0xcf, 0xff, 0x65},
+ {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x65},
+ {EM2874_R80_GPIO_P0_CTRL, 0xcf, 0xff, 0x0b},
+ {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x65},
{ -1, -1, -1, -1},
};
@@ -488,15 +488,15 @@ static void terratec_h5_init(struct em28xx *dev)
int i;
struct em28xx_reg_seq terratec_h5_init[] = {
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
- {EM2874_R80_GPIO, 0xf6, 0xff, 100},
- {EM2874_R80_GPIO, 0xf2, 0xff, 50},
- {EM2874_R80_GPIO, 0xf6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
{ -1, -1, -1, -1},
};
struct em28xx_reg_seq terratec_h5_end[] = {
- {EM2874_R80_GPIO, 0xe6, 0xff, 100},
- {EM2874_R80_GPIO, 0xa6, 0xff, 50},
- {EM2874_R80_GPIO, 0xe6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
{ -1, -1, -1, -1},
};
struct {
@@ -544,14 +544,14 @@ static void terratec_htc_stick_init(struct em28xx *dev)
*/
struct em28xx_reg_seq terratec_htc_stick_init[] = {
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
- {EM2874_R80_GPIO, 0xf6, 0xff, 100},
- {EM2874_R80_GPIO, 0xe6, 0xff, 50},
- {EM2874_R80_GPIO, 0xf6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
{ -1, -1, -1, -1},
};
struct em28xx_reg_seq terratec_htc_stick_end[] = {
- {EM2874_R80_GPIO, 0xb6, 0xff, 100},
- {EM2874_R80_GPIO, 0xf6, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0xb6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50},
{ -1, -1, -1, -1},
};
@@ -591,15 +591,15 @@ static void terratec_htc_usb_xs_init(struct em28xx *dev)
struct em28xx_reg_seq terratec_htc_usb_xs_init[] = {
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
- {EM2874_R80_GPIO, 0xb2, 0xff, 100},
- {EM2874_R80_GPIO, 0xb2, 0xff, 50},
- {EM2874_R80_GPIO, 0xb6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xb2, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xb2, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0xb6, 0xff, 100},
{ -1, -1, -1, -1},
};
struct em28xx_reg_seq terratec_htc_usb_xs_end[] = {
- {EM2874_R80_GPIO, 0xa6, 0xff, 100},
- {EM2874_R80_GPIO, 0xa6, 0xff, 50},
- {EM2874_R80_GPIO, 0xe6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
{ -1, -1, -1, -1},
};
diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h
index 622871d..0233c5b 100644
--- a/drivers/media/usb/em28xx/em28xx-reg.h
+++ b/drivers/media/usb/em28xx/em28xx-reg.h
@@ -193,7 +193,20 @@
#define EM2874_R50_IR_CONFIG 0x50
#define EM2874_R51_IR 0x51
#define EM2874_R5F_TS_ENABLE 0x5f
-#define EM2874_R80_GPIO 0x80
+
+/* em2874/174/84, em25xx, em276x/7x/8x GPIO registers */
+/*
+ * NOTE: not all ports are bonded out;
+ * Some ports are multiplexed with special function I/O
+ */
+#define EM2874_R80_GPIO_P0_CTRL 0x80
+#define EM2874_R81_GPIO_P1_CTRL 0x81
+#define EM2874_R82_GPIO_P2_CTRL 0x82
+#define EM2874_R83_GPIO_P3_CTRL 0x83
+#define EM2874_R84_GPIO_P0_STATE 0x84
+#define EM2874_R85_GPIO_P1_STATE 0x85
+#define EM2874_R86_GPIO_P2_STATE 0x86
+#define EM2874_R87_GPIO_P3_STATE 0x87
/* em2874 IR config register (0x50) */
#define EM2874_IR_NEC 0x00
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/4] em28xx: improve em2820-em2873/83 GPIO port register definitions and descriptions
2013-06-03 18:12 [PATCH 0/4] em28xx: GPIO registers: extend definitions and remove the caching Frank Schäfer
2013-06-03 18:12 ` [PATCH 1/4] em28xx: extend GPIO register definitions for the em25xx, em276x/7x/8x, em2874/174/84 Frank Schäfer
@ 2013-06-03 18:12 ` Frank Schäfer
2013-06-03 18:12 ` [PATCH 3/4] em28xx: move snapshot button bit definition for reg 0x0C from em28xx-input.c to em28xx.h Frank Schäfer
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Frank Schäfer @ 2013-06-03 18:12 UTC (permalink / raw)
To: mchehab; +Cc: linux-media, Frank Schäfer
- add definition for GPIO register 0x09 (reading/input)
- extend the information the chip variants that support GPIO registers 0x08/0x09
- rename EM28XX_R08_GPIO to EM2820_R08_GPIO_CTRL
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
---
drivers/media/usb/em28xx/em28xx-cards.c | 128 +++++++++++++++----------------
drivers/media/usb/em28xx/em28xx-dvb.c | 6 +-
drivers/media/usb/em28xx/em28xx-reg.h | 5 +-
3 Dateien geändert, 70 Zeilen hinzugefügt(+), 69 Zeilen entfernt(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index a2230cc..7f1422b 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -83,26 +83,26 @@ static void em28xx_pre_card_setup(struct em28xx *dev);
/* Reset for the most [analog] boards */
static struct em28xx_reg_seq default_analog[] = {
- {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Reset for the most [digital] boards */
static struct em28xx_reg_seq default_digital[] = {
- {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Board Hauppauge WinTV HVR 900 analog */
static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
- {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10},
{0x05, 0xff, 0x10, 10},
{ -1, -1, -1, -1},
};
/* Board Hauppauge WinTV HVR 900 digital */
static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
- {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x04, 0x0f, 10},
{EM2880_R04_GPO, 0x0c, 0x0f, 10},
{ -1, -1, -1, -1},
@@ -110,14 +110,14 @@ static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
/* Board Hauppauge WinTV HVR 900 (R2) digital */
static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
- {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x0c, 0x0f, 10},
{ -1, -1, -1, -1},
};
/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
- {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
@@ -128,11 +128,11 @@ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
/* Board - EM2882 Kworld 315U digital */
static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
- {EM28XX_R08_GPIO, 0xff, 0xff, 10},
- {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
{EM2880_R04_GPO, 0x04, 0xff, 10},
{EM2880_R04_GPO, 0x0c, 0xff, 10},
- {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10},
{ -1, -1, -1, -1},
};
@@ -145,13 +145,13 @@ static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
};
static struct em28xx_reg_seq kworld_330u_analog[] = {
- {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x00, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq kworld_330u_digital[] = {
- {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
{ -1, -1, -1, -1},
};
@@ -163,12 +163,12 @@ static struct em28xx_reg_seq kworld_330u_digital[] = {
GOP3 - s5h1409 reset
*/
static struct em28xx_reg_seq evga_indtube_analog[] = {
- {EM28XX_R08_GPIO, 0x79, 0xff, 60},
+ {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq evga_indtube_digital[] = {
- {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
+ {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1},
{EM2880_R04_GPO, 0x04, 0xff, 10},
{EM2880_R04_GPO, 0x0c, 0xff, 1},
{ -1, -1, -1, -1},
@@ -186,31 +186,31 @@ static struct em28xx_reg_seq evga_indtube_digital[] = {
* EM_GPIO_7 - currently unknown
*/
static struct em28xx_reg_seq kworld_a340_digital[] = {
- {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Pinnacle Hybrid Pro eb1a:2881 */
static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
- {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
- {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
{EM2880_R04_GPO, 0x0c, 0xff, 1},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
- {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x00, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
- {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
{ -1, -1, -1, -1},
};
@@ -219,66 +219,66 @@ static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
GPIO4 - CU1216L NIM
Other GPIOs seems to be don't care. */
static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
- {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
- {EM28XX_R08_GPIO, 0xde, 0xff, 10},
- {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
- {EM28XX_R08_GPIO, 0xff, 0xff, 10},
- {EM28XX_R08_GPIO, 0x7f, 0xff, 10},
- {EM28XX_R08_GPIO, 0x6f, 0xff, 10},
- {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{-1, -1, -1, -1},
};
/* Callback for the most boards */
static struct em28xx_reg_seq default_tuner_gpio[] = {
- {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
- {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
- {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Mute/unmute */
static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
- {EM28XX_R08_GPIO, 5, 7, 10},
+ {EM2820_R08_GPIO_CTRL, 5, 7, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
- {EM28XX_R08_GPIO, 4, 7, 10},
+ {EM2820_R08_GPIO_CTRL, 4, 7, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq compro_mute_gpio[] = {
- {EM28XX_R08_GPIO, 6, 7, 10},
+ {EM2820_R08_GPIO_CTRL, 6, 7, 10},
{ -1, -1, -1, -1},
};
/* Terratec AV350 */
static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
- {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
- {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq silvercrest_reg_seq[] = {
- {EM28XX_R08_GPIO, 0xff, 0xff, 10},
- {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq vc211a_enable[] = {
- {EM28XX_R08_GPIO, 0xff, 0x07, 10},
- {EM28XX_R08_GPIO, 0xff, 0x0f, 10},
- {EM28XX_R08_GPIO, 0xff, 0x0b, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq dikom_dk300_digital[] = {
- {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
+ {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
{ -1, -1, -1, -1},
};
@@ -310,7 +310,7 @@ static struct em28xx_reg_seq pctv_290e[] = {
#if 0
static struct em28xx_reg_seq terratec_h5_gpio[] = {
- {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50},
{EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50},
@@ -2300,9 +2300,9 @@ static void em28xx_pre_card_setup(struct em28xx *dev)
break;
case EM2861_BOARD_KWORLD_PVRTV_300U:
case EM2880_BOARD_KWORLD_DVB_305U:
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d);
msleep(10);
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d);
msleep(10);
break;
case EM2870_BOARD_COMPRO_VIDEOMATE:
@@ -2312,45 +2312,45 @@ static void em28xx_pre_card_setup(struct em28xx *dev)
msleep(10);
em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
msleep(10);
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
mdelay(70);
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
mdelay(70);
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc);
mdelay(70);
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
mdelay(70);
break;
case EM2870_BOARD_TERRATEC_XS_MT2060:
/* this device needs some gpio writes to get the DVB-T
demod work */
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
mdelay(70);
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
mdelay(70);
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
mdelay(70);
break;
case EM2870_BOARD_PINNACLE_PCTV_DVB:
/* this device needs some gpio writes to get the
DVB-T demod work */
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
mdelay(70);
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
mdelay(70);
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
mdelay(70);
break;
case EM2820_BOARD_GADMEI_UTV310:
case EM2820_BOARD_MSI_VOX_USB_2:
/* enables audio for that devices */
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
break;
case EM2882_BOARD_KWORLD_ATSC_315U:
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
msleep(10);
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
msleep(10);
em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
msleep(10);
@@ -2376,13 +2376,13 @@ static void em28xx_pre_card_setup(struct em28xx *dev)
break;
case EM2820_BOARD_IODATA_GVMVP_SZ:
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
msleep(70);
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
msleep(10);
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
msleep(70);
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
msleep(70);
break;
}
@@ -2678,12 +2678,12 @@ static void em28xx_card_setup(struct em28xx *dev)
case EM2882_BOARD_KWORLD_ATSC_315U:
em28xx_write_reg(dev, 0x0d, 0x42);
msleep(10);
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
msleep(10);
break;
case EM2820_BOARD_KWORLD_PVRTV2800RF:
/* GPIO enables sound on KWORLD PVR TV 2800RF */
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
+ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9);
break;
case EM2820_BOARD_UNKNOWN:
case EM2800_BOARD_UNKNOWN:
@@ -2899,7 +2899,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
/* Set the default GPO/GPIO for legacy devices */
dev->reg_gpo_num = EM2880_R04_GPO;
- dev->reg_gpio_num = EM28XX_R08_GPIO;
+ dev->reg_gpio_num = EM2820_R08_GPIO_CTRL;
dev->wait_after_write = 5;
@@ -3087,7 +3087,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
if (dev->board.has_msp34xx) {
/* Send a reset to other chips via gpio */
- retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
+ retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
if (retval < 0) {
em28xx_errdev("%s: em28xx_write_reg - "
"msp34xx(1) failed! error [%d]\n",
@@ -3096,7 +3096,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
}
msleep(3);
- retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+ retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
if (retval < 0) {
em28xx_errdev("%s: em28xx_write_reg - "
"msp34xx(2) failed! error [%d]\n",
diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index 69aed82..bb1e8dc 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -487,7 +487,7 @@ static void terratec_h5_init(struct em28xx *dev)
{
int i;
struct em28xx_reg_seq terratec_h5_init[] = {
- {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50},
{EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
@@ -543,7 +543,7 @@ static void terratec_htc_stick_init(struct em28xx *dev)
* 0xb6: unknown (does not affect DVB-T).
*/
struct em28xx_reg_seq terratec_htc_stick_init[] = {
- {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 50},
{EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
@@ -590,7 +590,7 @@ static void terratec_htc_usb_xs_init(struct em28xx *dev)
int i;
struct em28xx_reg_seq terratec_htc_usb_xs_init[] = {
- {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xb2, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xb2, 0xff, 50},
{EM2874_R80_GPIO_P0_CTRL, 0xb6, 0xff, 100},
diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h
index 0233c5b..af39ddb 100644
--- a/drivers/media/usb/em28xx/em28xx-reg.h
+++ b/drivers/media/usb/em28xx/em28xx-reg.h
@@ -49,8 +49,9 @@
/* GPIO/GPO registers */
-#define EM2880_R04_GPO 0x04 /* em2880-em2883 only */
-#define EM28XX_R08_GPIO 0x08 /* em2820 or upper */
+#define EM2880_R04_GPO 0x04 /* em2880-em2883 only */
+#define EM2820_R08_GPIO_CTRL 0x08 /* em2820-em2873/83 only */
+#define EM2820_R09_GPIO_STATE 0x09 /* em2820-em2873/83 only */
#define EM28XX_R06_I2C_CLK 0x06
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/4] em28xx: move snapshot button bit definition for reg 0x0C from em28xx-input.c to em28xx.h
2013-06-03 18:12 [PATCH 0/4] em28xx: GPIO registers: extend definitions and remove the caching Frank Schäfer
2013-06-03 18:12 ` [PATCH 1/4] em28xx: extend GPIO register definitions for the em25xx, em276x/7x/8x, em2874/174/84 Frank Schäfer
2013-06-03 18:12 ` [PATCH 2/4] em28xx: improve em2820-em2873/83 GPIO port register definitions and descriptions Frank Schäfer
@ 2013-06-03 18:12 ` Frank Schäfer
2013-06-03 18:12 ` [PATCH 4/4] em28xx: remove GPIO register caching Frank Schäfer
2013-06-03 18:13 ` [PATCH 0/4] em28xx: GPIO registers: extend definitions and remove the caching Frank Schäfer
4 siblings, 0 replies; 6+ messages in thread
From: Frank Schäfer @ 2013-06-03 18:12 UTC (permalink / raw)
To: mchehab; +Cc: linux-media, Frank Schäfer
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
---
drivers/media/usb/em28xx/em28xx-input.c | 1 -
drivers/media/usb/em28xx/em28xx-reg.h | 3 ++-
2 Dateien geändert, 2 Zeilen hinzugefügt(+), 2 Zeilen entfernt(-)
diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c
index 466b19d..ea181e4 100644
--- a/drivers/media/usb/em28xx/em28xx-input.c
+++ b/drivers/media/usb/em28xx/em28xx-input.c
@@ -32,7 +32,6 @@
#define EM28XX_SNAPSHOT_KEY KEY_CAMERA
#define EM28XX_SBUTTON_QUERY_INTERVAL 500
-#define EM28XX_R0C_USBSUSP_SNAPSHOT 0x20
static unsigned int ir_debug;
module_param(ir_debug, int, 0644);
diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h
index af39ddb..a88906c 100644
--- a/drivers/media/usb/em28xx/em28xx-reg.h
+++ b/drivers/media/usb/em28xx/em28xx-reg.h
@@ -68,7 +68,8 @@
#define EM28XX_R0A_CHIPID 0x0a
-#define EM28XX_R0C_USBSUSP 0x0c /* */
+#define EM28XX_R0C_USBSUSP 0x0c
+#define EM28XX_R0C_USBSUSP_SNAPSHOT 0x20 /* 1=button pressed, needs reset */
#define EM28XX_R0E_AUDIOSRC 0x0e
#define EM28XX_R0F_XCLK 0x0f
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 4/4] em28xx: remove GPIO register caching
2013-06-03 18:12 [PATCH 0/4] em28xx: GPIO registers: extend definitions and remove the caching Frank Schäfer
` (2 preceding siblings ...)
2013-06-03 18:12 ` [PATCH 3/4] em28xx: move snapshot button bit definition for reg 0x0C from em28xx-input.c to em28xx.h Frank Schäfer
@ 2013-06-03 18:12 ` Frank Schäfer
2013-06-03 18:13 ` [PATCH 0/4] em28xx: GPIO registers: extend definitions and remove the caching Frank Schäfer
4 siblings, 0 replies; 6+ messages in thread
From: Frank Schäfer @ 2013-06-03 18:12 UTC (permalink / raw)
To: mchehab; +Cc: linux-media, Frank Schäfer
The GPIO register caching is the result of wrong assumptions and incomplete
knowledge about the GPIO registers and their functionality.
Today, we know that it is not needed.
It is also limited to a single register and therefore incomplete (newer chips
are using multiple registers).
Instead of extending the caching, get rid of it, because it has no real
benefits and just bloats/complicates the code.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
---
drivers/media/usb/em28xx/em28xx-cards.c | 12 ------------
drivers/media/usb/em28xx/em28xx-core.c | 27 ++-------------------------
drivers/media/usb/em28xx/em28xx.h | 6 ------
3 Dateien geändert, 2 Zeilen hinzugefügt(+), 43 Zeilen entfernt(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 7f1422b..1a59cbc 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -2897,10 +2897,6 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
em28xx_set_model(dev);
- /* Set the default GPO/GPIO for legacy devices */
- dev->reg_gpo_num = EM2880_R04_GPO;
- dev->reg_gpio_num = EM2820_R08_GPIO_CTRL;
-
dev->wait_after_write = 5;
/* Based on the Chip ID, set the device configuration */
@@ -2948,13 +2944,11 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
break;
case CHIP_ID_EM2874:
chip_name = "em2874";
- dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
case CHIP_ID_EM28174:
chip_name = "em28174";
- dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
@@ -2964,7 +2958,6 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
break;
case CHIP_ID_EM2884:
chip_name = "em2884";
- dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
@@ -2993,11 +2986,6 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
return 0;
}
- /* Prepopulate cached GPO register content */
- retval = em28xx_read_reg(dev, dev->reg_gpo_num);
- if (retval >= 0)
- dev->reg_gpo = retval;
-
em28xx_pre_card_setup(dev);
if (!dev->board.is_em2800) {
diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c
index a802128..fc157af 100644
--- a/drivers/media/usb/em28xx/em28xx-core.c
+++ b/drivers/media/usb/em28xx/em28xx-core.c
@@ -193,23 +193,7 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len)
{
- int rc;
-
- rc = em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len);
-
- /* Stores GPO/GPIO values at the cache, if changed
- Only write values should be stored, since input on a GPIO
- register will return the input bits.
- Not sure what happens on reading GPO register.
- */
- if (rc >= 0) {
- if (reg == dev->reg_gpo_num)
- dev->reg_gpo = buf[0];
- else if (reg == dev->reg_gpio_num)
- dev->reg_gpio = buf[0];
- }
-
- return rc;
+ return em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len);
}
EXPORT_SYMBOL_GPL(em28xx_write_regs);
@@ -231,14 +215,7 @@ int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
int oldval;
u8 newval;
- /* Uses cache for gpo/gpio registers */
- if (reg == dev->reg_gpo_num)
- oldval = dev->reg_gpo;
- else if (reg == dev->reg_gpio_num)
- oldval = dev->reg_gpio;
- else
- oldval = em28xx_read_reg(dev, reg);
-
+ oldval = em28xx_read_reg(dev, reg);
if (oldval < 0)
return oldval;
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index 59a9580..205e903 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -637,12 +637,6 @@ struct em28xx {
enum em28xx_mode mode;
- /* register numbers for GPO/GPIO registers */
- u16 reg_gpo_num, reg_gpio_num;
-
- /* Caches GPO and GPIO registers */
- unsigned char reg_gpo, reg_gpio;
-
/* Snapshot button */
char snapshot_button_path[30]; /* path of the input dev */
struct input_dev *sbutton_input_dev;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 0/4] em28xx: GPIO registers: extend definitions and remove the caching
2013-06-03 18:12 [PATCH 0/4] em28xx: GPIO registers: extend definitions and remove the caching Frank Schäfer
` (3 preceding siblings ...)
2013-06-03 18:12 ` [PATCH 4/4] em28xx: remove GPIO register caching Frank Schäfer
@ 2013-06-03 18:13 ` Frank Schäfer
4 siblings, 0 replies; 6+ messages in thread
From: Frank Schäfer @ 2013-06-03 18:13 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: Linux Media Mailing List
Am 03.06.2013 20:12, schrieb Frank Schäfer:
> The first two patches add some missing GPIO register definitions,
> while the third patch is a minor code movement to clean up things.
> The fourth patch finally removes the GPIO register caching.
>
> Frank Schäfer (4):
> em28xx: extend GPIO register definitions for the em25xx,
> em276x/7x/8x, em2874/174/84
> em28xx: improve em2820-em2873/83 GPIO port register definitions and
> descriptions
> em28xx: move snapshot button bit definition for reg 0x0C from
> em28xx-input.c to em28xx.h
> em28xx: remove GPIO register caching
>
> drivers/media/usb/em28xx/em28xx-cards.c | 220 +++++++++++++++----------------
> drivers/media/usb/em28xx/em28xx-core.c | 27 +---
> drivers/media/usb/em28xx/em28xx-dvb.c | 68 +++++-----
> drivers/media/usb/em28xx/em28xx-input.c | 1 -
> drivers/media/usb/em28xx/em28xx-reg.h | 23 +++-
> drivers/media/usb/em28xx/em28xx.h | 6 -
> 6 Dateien geändert, 159 Zeilen hinzugefügt(+), 186 Zeilen entfernt(-)
...makes the following 2 patches obsolete:
https://patchwork.linuxtv.org/patch/18510/
https://patchwork.linuxtv.org/patch/18511/
Regards,
Frank
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-06-03 18:11 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-06-03 18:12 [PATCH 0/4] em28xx: GPIO registers: extend definitions and remove the caching Frank Schäfer
2013-06-03 18:12 ` [PATCH 1/4] em28xx: extend GPIO register definitions for the em25xx, em276x/7x/8x, em2874/174/84 Frank Schäfer
2013-06-03 18:12 ` [PATCH 2/4] em28xx: improve em2820-em2873/83 GPIO port register definitions and descriptions Frank Schäfer
2013-06-03 18:12 ` [PATCH 3/4] em28xx: move snapshot button bit definition for reg 0x0C from em28xx-input.c to em28xx.h Frank Schäfer
2013-06-03 18:12 ` [PATCH 4/4] em28xx: remove GPIO register caching Frank Schäfer
2013-06-03 18:13 ` [PATCH 0/4] em28xx: GPIO registers: extend definitions and remove the caching Frank Schäfer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).