From: Hans Verkuil <hverkuil@xs4all.nl>
To: Benoit Parrot <bparrot@ti.com>
Cc: Prabhakar Lad <prabhakar.csengg@gmail.com>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [Patch 08/13] media: am437x-vpfe: Maintain a reference to the current vpfe_fmt
Date: Fri, 13 Sep 2019 15:34:28 +0200 [thread overview]
Message-ID: <693c483f-5342-ab0a-7023-222f06bd011e@xs4all.nl> (raw)
In-Reply-To: <20190913133245.6rvajfhlghbocuf4@ti.com>
On 9/13/19 3:32 PM, Benoit Parrot wrote:
> Hans Verkuil <hverkuil@xs4all.nl> wrote on Fri [2019-Sep-13 15:14:45 +0200]:
>> On 9/9/19 6:27 PM, Benoit Parrot wrote:
>>> Keep a reference to the currently selected struct vpfe_fmt * object.
>>> By doing so we rename the current struct v4l2_format * member from
>>> fmt to v_fmt.
>>> The added struct vpfe_fmt * reference is set to "const" so we also
>>> constify all accesses and related helper functions.
>>
>> This explains what you do, but not why you do it.
>
> Hmm ok I'll rework this a bit.
>
>>
>> And I think fmt vs v_fmt is *very* confusing naming.
>
> Well in this case v_fmt stands for "v4l2_fmt" and depending on the function
> I was using fmt to either mean a vpfe_fmt pointer or a v4l2_format pointer
> so tried (and apparently failed) to make it clearer which was which.
Well, v_fmt could refer to either v4l2_format or vpfe_fmt, so that prefix
doesn't help me :-)
Since 'fmt' was already defined in struct vpfe_device as v4l2_format, I'd
just keep that rather than causing code churn by changing it. And come up
with a better name for when you refer to a vpfe_fmt struct.
Regards,
Hans
>
>>
>> I'd keep fmt as-is, and come up with a different name for the vpfe_fmt
>> pointer. ref_vpfe_fmt?
>>
>> Regards,
>>
>> Hans
>>
>>>
>>> Signed-off-by: Benoit Parrot <bparrot@ti.com>
>>> ---
>>> drivers/media/platform/am437x/am437x-vpfe.c | 88 +++++++++++++--------
>>> drivers/media/platform/am437x/am437x-vpfe.h | 3 +-
>>> 2 files changed, 55 insertions(+), 36 deletions(-)
>>>
>>> diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
>>> index e76dc2b3b7b8..a8f6cf1d06a0 100644
>>> --- a/drivers/media/platform/am437x/am437x-vpfe.c
>>> +++ b/drivers/media/platform/am437x/am437x-vpfe.c
>>> @@ -147,8 +147,8 @@ static int
>>> __vpfe_get_format(struct vpfe_device *vpfe,
>>> struct v4l2_format *format, unsigned int *bpp);
>>>
>>> -static struct vpfe_fmt *find_format_by_code(struct vpfe_device *vpfe,
>>> - unsigned int code)
>>> +static const struct vpfe_fmt *find_format_by_code(struct vpfe_device *vpfe,
>>> + unsigned int code)
>>> {
>>> struct vpfe_fmt *fmt;
>>> unsigned int k;
>>> @@ -162,8 +162,8 @@ static struct vpfe_fmt *find_format_by_code(struct vpfe_device *vpfe,
>>> return NULL;
>>> }
>>>
>>> -static struct vpfe_fmt *find_format_by_pix(struct vpfe_device *vpfe,
>>> - unsigned int pixelformat)
>>> +static const struct vpfe_fmt *find_format_by_pix(struct vpfe_device *vpfe,
>>> + unsigned int pixelformat)
>>> {
>>> struct vpfe_fmt *fmt;
>>> unsigned int k;
>>> @@ -184,7 +184,7 @@ mbus_to_pix(struct vpfe_device *vpfe,
>>> {
>>> struct vpfe_subdev_info *sdinfo = vpfe->current_subdev;
>>> unsigned int bus_width = sdinfo->vpfe_param.bus_width;
>>> - struct vpfe_fmt *fmt;
>>> + const struct vpfe_fmt *fmt;
>>>
>>> fmt = find_format_by_code(vpfe, mbus->code);
>>> if (WARN_ON(fmt == NULL)) {
>>> @@ -207,7 +207,7 @@ static void pix_to_mbus(struct vpfe_device *vpfe,
>>> struct v4l2_pix_format *pix_fmt,
>>> struct v4l2_mbus_framefmt *mbus_fmt)
>>> {
>>> - struct vpfe_fmt *fmt;
>>> + const struct vpfe_fmt *fmt;
>>>
>>> fmt = find_format_by_pix(vpfe, pix_fmt->pixelformat);
>>> if (!fmt) {
>>> @@ -990,10 +990,10 @@ static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe)
>>> vpfe_dbg(2, vpfe, "vpfe_config_ccdc_image_format\n");
>>>
>>> vpfe_dbg(1, vpfe, "pixelformat: %s\n",
>>> - print_fourcc(vpfe->fmt.fmt.pix.pixelformat));
>>> + print_fourcc(vpfe->v_fmt.fmt.pix.pixelformat));
>>>
>>> if (vpfe_ccdc_set_pixel_format(&vpfe->ccdc,
>>> - vpfe->fmt.fmt.pix.pixelformat) < 0) {
>>> + vpfe->v_fmt.fmt.pix.pixelformat) < 0) {
>>> vpfe_err(vpfe, "couldn't set pix format in ccdc\n");
>>> return -EINVAL;
>>> }
>>> @@ -1001,7 +1001,7 @@ static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe)
>>> /* configure the image window */
>>> vpfe_ccdc_set_image_window(&vpfe->ccdc, &vpfe->crop, vpfe->bpp);
>>>
>>> - switch (vpfe->fmt.fmt.pix.field) {
>>> + switch (vpfe->v_fmt.fmt.pix.field) {
>>> case V4L2_FIELD_INTERLACED:
>>> /* do nothing, since it is default */
>>> ret = vpfe_ccdc_set_buftype(
>>> @@ -1043,7 +1043,8 @@ static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe)
>>> static int vpfe_config_image_format(struct vpfe_device *vpfe,
>>> v4l2_std_id std_id)
>>> {
>>> - struct v4l2_pix_format *pix = &vpfe->fmt.fmt.pix;
>>> + const struct vpfe_fmt *fmt;
>>> + struct v4l2_pix_format *pix = &vpfe->v_fmt.fmt.pix;
>>> int i, ret;
>>>
>>> for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) {
>>> @@ -1078,10 +1079,18 @@ static int vpfe_config_image_format(struct vpfe_device *vpfe,
>>> else
>>> pix->field = V4L2_FIELD_NONE;
>>>
>>> - ret = __vpfe_get_format(vpfe, &vpfe->fmt, &vpfe->bpp);
>>> + ret = __vpfe_get_format(vpfe, &vpfe->v_fmt, &vpfe->bpp);
>>> if (ret)
>>> return ret;
>>>
>>> + fmt = find_format_by_pix(vpfe, pix->pixelformat);
>>> + if (!fmt) {
>>> + vpfe_dbg(3, vpfe, "Invalid pixel code: %4.4s\n",
>>> + (char *)&pix->pixelformat);
>>> + return -EINVAL;
>>> + }
>>> + vpfe->fmt = fmt;
>>> +
>>> /* Update the crop window based on found values */
>>> vpfe->crop.width = pix->width;
>>> vpfe->crop.height = pix->height;
>>> @@ -1227,7 +1236,7 @@ static inline void vpfe_schedule_bottom_field(struct vpfe_device *vpfe)
>>> static inline void vpfe_process_buffer_complete(struct vpfe_device *vpfe)
>>> {
>>> vpfe->cur_frm->vb.vb2_buf.timestamp = ktime_get_ns();
>>> - vpfe->cur_frm->vb.field = vpfe->fmt.fmt.pix.field;
>>> + vpfe->cur_frm->vb.field = vpfe->v_fmt.fmt.pix.field;
>>> vpfe->cur_frm->vb.sequence = vpfe->sequence++;
>>> vb2_buffer_done(&vpfe->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE);
>>> vpfe->cur_frm = vpfe->next_frm;
>>> @@ -1296,7 +1305,7 @@ static void vpfe_handle_interlaced_irq(struct vpfe_device *vpfe,
>>> static irqreturn_t vpfe_isr(int irq, void *dev)
>>> {
>>> struct vpfe_device *vpfe = (struct vpfe_device *)dev;
>>> - enum v4l2_field field = vpfe->fmt.fmt.pix.field;
>>> + enum v4l2_field field = vpfe->v_fmt.fmt.pix.field;
>>> int intr_status, stopping = vpfe->stopping;
>>>
>>> intr_status = vpfe_reg_read(&vpfe->ccdc, VPFE_IRQ_STS);
>>> @@ -1397,7 +1406,7 @@ static int __vpfe_get_format(struct vpfe_device *vpfe,
>>> mbus_to_pix(vpfe, &mbus_fmt, &format->fmt.pix, bpp);
>>> }
>>>
>>> - format->type = vpfe->fmt.type;
>>> + format->type = vpfe->v_fmt.type;
>>>
>>> vpfe_dbg(1, vpfe,
>>> "%s size %dx%d (%s) bytesperline = %d, size = %d, bpp = %d\n",
>>> @@ -1434,7 +1443,7 @@ static int __vpfe_set_format(struct vpfe_device *vpfe,
>>> v4l2_fill_pix_format(&format->fmt.pix, &fmt.format);
>>> mbus_to_pix(vpfe, &fmt.format, &format->fmt.pix, bpp);
>>>
>>> - format->type = vpfe->fmt.type;
>>> + format->type = vpfe->v_fmt.type;
>>>
>>> vpfe_dbg(1, vpfe,
>>> "%s size %dx%d (%s) bytesperline = %d, size = %d, bpp = %d\n",
>>> @@ -1452,7 +1461,7 @@ static int vpfe_g_fmt(struct file *file, void *priv,
>>>
>>> vpfe_dbg(2, vpfe, "vpfe_g_fmt\n");
>>>
>>> - *fmt = vpfe->fmt;
>>> + *fmt = vpfe->v_fmt;
>>>
>>> return 0;
>>> }
>>> @@ -1496,9 +1505,10 @@ static int vpfe_try_fmt(struct file *file, void *priv,
>>> }
>>>
>>> static int vpfe_s_fmt(struct file *file, void *priv,
>>> - struct v4l2_format *fmt)
>>> + struct v4l2_format *f)
>>> {
>>> struct vpfe_device *vpfe = video_drvdata(file);
>>> + const struct vpfe_fmt *fmt;
>>> struct v4l2_format format;
>>> unsigned int bpp;
>>> int ret;
>>> @@ -1515,25 +1525,32 @@ static int vpfe_s_fmt(struct file *file, void *priv,
>>> if (ret)
>>> return ret;
>>>
>>> -
>>> - if (!cmp_v4l2_format(fmt, &format)) {
>>> + if (!cmp_v4l2_format(f, &format)) {
>>> /* Sensor format is different from the requested format
>>> * so we need to change it
>>> */
>>> - ret = __vpfe_set_format(vpfe, fmt, &bpp);
>>> + ret = __vpfe_set_format(vpfe, f, &bpp);
>>> if (ret)
>>> return ret;
>>> } else /* Just make sure all of the fields are consistent */
>>> - *fmt = format;
>>> + *f = format;
>>> +
>>> + fmt = find_format_by_pix(vpfe, f->fmt.pix.pixelformat);
>>> + if (!fmt) {
>>> + vpfe_dbg(3, vpfe, "Invalid pixel code: %4.4s, This should not happen!!\n",
>>> + (char *)&f->fmt.pix.pixelformat);
>>> + return -EINVAL;
>>> + }
>>>
>>> /* First detach any IRQ if currently attached */
>>> vpfe_detach_irq(vpfe);
>>> - vpfe->fmt = *fmt;
>>> + vpfe->v_fmt = *f;
>>> vpfe->bpp = bpp;
>>> + vpfe->fmt = fmt;
>>>
>>> /* Update the crop window based on found values */
>>> - vpfe->crop.width = fmt->fmt.pix.width;
>>> - vpfe->crop.height = fmt->fmt.pix.height;
>>> + vpfe->crop.width = f->fmt.pix.width;
>>> + vpfe->crop.height = f->fmt.pix.height;
>>>
>>> /* set image capture parameters in the ccdc */
>>> return vpfe_config_ccdc_image_format(vpfe);
>>> @@ -1547,7 +1564,7 @@ static int vpfe_enum_size(struct file *file, void *priv,
>>> struct vpfe_subdev_info *sdinfo;
>>> struct v4l2_mbus_framefmt mbus;
>>> struct v4l2_pix_format pix;
>>> - struct vpfe_fmt *fmt;
>>> + const struct vpfe_fmt *fmt;
>>> int ret;
>>>
>>> vpfe_dbg(2, vpfe, "vpfe_enum_size\n");
>>> @@ -1850,7 +1867,7 @@ static int vpfe_queue_setup(struct vb2_queue *vq,
>>> unsigned int sizes[], struct device *alloc_devs[])
>>> {
>>> struct vpfe_device *vpfe = vb2_get_drv_priv(vq);
>>> - unsigned size = vpfe->fmt.fmt.pix.sizeimage;
>>> + unsigned int size = vpfe->v_fmt.fmt.pix.sizeimage;
>>>
>>> if (vq->num_buffers + *nbuffers < 3)
>>> *nbuffers = 3 - vq->num_buffers;
>>> @@ -1886,12 +1903,12 @@ static int vpfe_buffer_prepare(struct vb2_buffer *vb)
>>> struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>>> struct vpfe_device *vpfe = vb2_get_drv_priv(vb->vb2_queue);
>>>
>>> - vb2_set_plane_payload(vb, 0, vpfe->fmt.fmt.pix.sizeimage);
>>> + vb2_set_plane_payload(vb, 0, vpfe->v_fmt.fmt.pix.sizeimage);
>>>
>>> if (vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0))
>>> return -EINVAL;
>>>
>>> - vbuf->field = vpfe->fmt.fmt.pix.field;
>>> + vbuf->field = vpfe->v_fmt.fmt.pix.field;
>>>
>>> return 0;
>>> }
>>> @@ -2116,11 +2133,12 @@ vpfe_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
>>> s->r = vpfe->crop = r;
>>>
>>> vpfe_ccdc_set_image_window(&vpfe->ccdc, &r, vpfe->bpp);
>>> - vpfe->fmt.fmt.pix.width = r.width;
>>> - vpfe->fmt.fmt.pix.height = r.height;
>>> - vpfe->fmt.fmt.pix.bytesperline = vpfe_ccdc_get_line_length(&vpfe->ccdc);
>>> - vpfe->fmt.fmt.pix.sizeimage = vpfe->fmt.fmt.pix.bytesperline *
>>> - vpfe->fmt.fmt.pix.height;
>>> + vpfe->v_fmt.fmt.pix.width = r.width;
>>> + vpfe->v_fmt.fmt.pix.height = r.height;
>>> + vpfe->v_fmt.fmt.pix.bytesperline =
>>> + vpfe_ccdc_get_line_length(&vpfe->ccdc);
>>> + vpfe->v_fmt.fmt.pix.sizeimage = vpfe->v_fmt.fmt.pix.bytesperline *
>>> + vpfe->v_fmt.fmt.pix.height;
>>>
>>> vpfe_dbg(1, vpfe, "cropped (%d,%d)/%dx%d of %dx%d\n",
>>> r.left, r.top, r.width, r.height, cr.width, cr.height);
>>> @@ -2156,7 +2174,7 @@ static long vpfe_ioctl_default(struct file *file, void *priv,
>>> return ret;
>>> }
>>> ret = vpfe_get_ccdc_image_format(vpfe,
>>> - &vpfe->fmt);
>>> + &vpfe->v_fmt);
>>> if (ret < 0) {
>>> vpfe_dbg(2, vpfe,
>>> "Invalid image format at CCDC\n");
>>> @@ -2309,7 +2327,7 @@ static int vpfe_probe_complete(struct vpfe_device *vpfe)
>>> spin_lock_init(&vpfe->dma_queue_lock);
>>> mutex_init(&vpfe->lock);
>>>
>>> - vpfe->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>>> + vpfe->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>>>
>>> /* set first sub device as current one */
>>> vpfe->current_subdev = &vpfe->cfg->sub_devs[0];
>>> diff --git a/drivers/media/platform/am437x/am437x-vpfe.h b/drivers/media/platform/am437x/am437x-vpfe.h
>>> index 6f25750f84e4..64a25bf720e4 100644
>>> --- a/drivers/media/platform/am437x/am437x-vpfe.h
>>> +++ b/drivers/media/platform/am437x/am437x-vpfe.h
>>> @@ -280,7 +280,8 @@ struct vpfe_device {
>>> /* Pointer pointing to next v4l2_buffer */
>>> struct vpfe_cap_buffer *next_frm;
>>> /* Used to store pixel format */
>>> - struct v4l2_format fmt;
>>> + const struct vpfe_fmt *fmt;
>>> + struct v4l2_format v_fmt;
>>> /* Used to store current bytes per pixel based on current format */
>>> unsigned int bpp;
>>> struct vpfe_fmt *active_fmt[VPFE_MAX_ACTIVE_FMT];
>>>
>>
next prev parent reply other threads:[~2019-09-13 13:34 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-09 16:27 [Patch 00/13] media: am437x-vpfe: overdue maintenance Benoit Parrot
2019-09-09 16:27 ` [Patch 01/13] media: am437x-vpfe: Fix suspend path to always handle pinctrl config Benoit Parrot
2019-09-13 12:59 ` Hans Verkuil
2019-09-13 13:24 ` Benoit Parrot
2019-09-09 16:27 ` [Patch 02/13] media: am437x-vpfe: Fix missing first line Benoit Parrot
2019-09-13 13:00 ` Hans Verkuil
2019-09-13 13:25 ` Benoit Parrot
2019-09-09 16:27 ` [Patch 03/13] media: am437x-vpfe: Rework ISR routine for clarity Benoit Parrot
2019-09-09 16:27 ` [Patch 04/13] media: am437x-vpfe: Wait for end of frame before tear-down Benoit Parrot
2019-09-09 16:27 ` [Patch 05/13] media: am437x-vpfe: Streamlined vb2 buffer cleanup Benoit Parrot
2019-09-16 8:00 ` Lad, Prabhakar
2019-09-16 14:53 ` Benoit Parrot
2019-09-16 16:02 ` Lad, Prabhakar
2019-09-09 16:27 ` [Patch 06/13] media: am437x-vpfe: Setting STD to current value is not an error Benoit Parrot
2019-09-09 16:27 ` [Patch 07/13] media: am437x-vpfe: Use a per instance format array instead of a static one Benoit Parrot
2019-09-13 13:07 ` Hans Verkuil
2019-09-13 13:29 ` Benoit Parrot
2019-09-17 16:19 ` Benoit Parrot
2019-09-09 16:27 ` [Patch 08/13] media: am437x-vpfe: Maintain a reference to the current vpfe_fmt Benoit Parrot
2019-09-13 13:14 ` Hans Verkuil
2019-09-13 13:32 ` Benoit Parrot
2019-09-13 13:34 ` Hans Verkuil [this message]
2019-09-13 13:43 ` Benoit Parrot
2019-09-09 16:27 ` [Patch 09/13] media: am437x-vpfe: fix function trace debug log Benoit Parrot
2019-09-09 16:54 ` Joe Perches
2019-09-09 17:14 ` Benoit Parrot
2019-09-09 16:27 ` [Patch 10/13] media: am437x-vpfe: Remove print_fourcc helper Benoit Parrot
2019-09-09 16:39 ` Joe Perches
2019-09-09 17:12 ` Benoit Parrot
2019-09-09 16:27 ` [Patch 11/13] media: am437x-vpfe: TRY_FMT ioctl is not really trying anything Benoit Parrot
2019-09-09 16:27 ` [Patch 12/13] media: am437x-vpfe: Remove per bus width static data Benoit Parrot
2019-09-13 13:19 ` Hans Verkuil
2019-09-13 13:34 ` Benoit Parrot
2019-09-09 16:27 ` [Patch 13/13] media: am437x-vpfe: Switch to SPDX Licensing Benoit Parrot
2019-09-10 10:42 ` [Patch 00/13] media: am437x-vpfe: overdue maintenance Hans Verkuil
2019-09-10 16:20 ` Benoit Parrot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=693c483f-5342-ab0a-7023-222f06bd011e@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=bparrot@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=prabhakar.csengg@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).