linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller
@ 2017-11-11  0:38 Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 01/25] rcar-vin: add Gen3 devicetree bindings documentation Niklas Söderlund
                   ` (24 more replies)
  0 siblings, 25 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

Hi,

This series adds Gen3 VIN support to rcar-vin driver for Renesas r8a7795
and r8a7796. It is based on the media-tree.

The driver is tested on both Renesas H3 (r8a7795, ES2.0) and
M3-W (r8a7796) together with the rcar-csi2 driver (posted separately and
not yet upstream) and the Salvator-X onboard ADV7482.

It is possible to capture both CVBS and HDMI video streams,
v4l2-compliance passes with no errors and media-ctl can be used to
change the routing and formats for the different entities in the media
graph.

Gen2 compatibility is verified on Koelsch and no problems where found, 
video can be captured just like before and v4l2-compliance passes 
without errors or warnings just like before this series.

I have started on a very basic test suite for the VIN driver at:

  https://git.ragnatech.se/vin-tests

And as before the state of the driver and information about how to test 
it can be found on the elinux wiki:

  http://elinux.org/R-Car/Tests:rcar-vin

* Changes since v6
- Rebase ontop of latest media-tree which brings in the use of the 
  fwnode async helpers for Gen2.
- Updated DT binding documentation, thanks Laurent for very helpful 
  input!
- Removed help text which where copied in from v4l2_ctrl_handler_init() 
  documentation when moving that code block, this was a residue from the 
  soc_camera conversion and should have been removed at that time.
- Removed bad check of tvnorms which disables IOCTLs if it's not set, 
  this was a residue from soc_camera conversion and have use in the 
  current driver.
- Moved all subdevice initialization from complete to bound handler 
  while improving the unbind handler. With this move all operations of 
  the ctrl_handler from the subdevice is handled in either bound or 
  unbind removing races pointed out by Laurent.
- Renamed rvin_v4l2_probe() -> rvin_v4l2_register() and 
  rvin_v4l2_remove() -> rvin_v4l2_unregister().
- Fold rvin_mbus_supported() into its only caller.
- Sort compatible string entries in ascending order.
- Improved documentation for struct rvin_group_chsel.
- Clarify comment in rvin_group_csi_pad_to_chan().
- Make use of of_device_get_match_data() as suggested by Geert.
- Fixed spelling mistakes.
- Added review tags from Hans.

* Changes since v5
- Extract and make use of common format checking for both Gen2 and Gen3.
- Assign pad at declaration time in rvin_get_sd_format()
- Always call pm_runtime_{get_sync,put}() and v4l2_pipeline_pm_use()
  when opening/closing a video device, remove the check of
  v4l2_fh_is_singular_file().
- Make rvin_set_chsel() return void instead of int since it always
  return 0.
- Simplify the VIN group allocator functions.
- Make the group notifier callbacks and setup more robust.
- Moved the video device registration back to probe time.
- Add H3 ES2.0 support.
- Fix handling of single field formats (top, bottom, alternate) as this
  was obviously wrong before but hidden by the Gen2 scaler support.
- Added review tags from Kieran.

* Changes since v4 (Not posted to ML)
- Updated to the new fwnode functions.
- Moved the registration of the video devices to the async notification
  callback.

* Changes since v3
- Only add neighboring subdevices to the async notifier. Instead of
  parsing the whole OF graph depend on incremental async subnotifier to
  discover the whole pipeline. This is needed to support arbitrarily
  long graphs and support the new ADV7482 prototype driver which Kieran
  is working on.
- Fix warning from lockdep, reported by Kieran.
- Fix commit messages from feedback from Sergei, thanks.
- Fix chip info an OF device ids sorting order, thanks Geert.
- Use subdev->of_node instead of subdev->dev->of_node, thanks Kieran.

* Changes since v2
- Do not try to control the subdevices in the media graph from the rcar-vin
  driver. Have user-space configure to format in the pipeline instead.
- Add link validation before starting the stream.
- Rework on how the subdevices are and the video node behave by defining
  specific V4L2 operations for the MC mode of operation, this simplified 
  the driver quit a bit, thanks Laurent!
- Add a new 'renesas,id' DT property which is needed to to be able to 
  keep the VIN to CSI-2 routing table inside the driver. Previously this 
  information was taken from the CSI-2 DT node which is obviously the 
  wrong way to do things. Thanks Laurent for pointing this out.
- Fixed a memory leek in the group allocator function.
- Return -EMLINK instead of -EBUSY if a MC link is not possible given 
  the current routing setup.
- Add comments to clarify that the 4 channels from the CSI-2 node is not 
  directly related to CSI-2 virtual channels, the CSI-2 node can output 
  any VC on any of its output channels.

* Changes since v1
- Remove unneeded casts as pointed out by Geert.
- Fix spelling and DT documentation as pointed out by Geert and Sergei, 
  thanks!
- Refresh patch 2/32 with an updated version, thanks Sakari for pointing 
  this out.
- Add Sakaris Ack to patch 1/32.
- Rebase on top of v4.9-rc1 instead of v4.9-rc3 to ease integration 
  testing together with renesas-drivers tree.


Niklas Söderlund (25):
  rcar-vin: add Gen3 devicetree bindings documentation
  rcar-vin: register the video device at probe time
  rcar-vin: move chip information to own struct
  rcar-vin: move max width and height information to chip information
  rcar-vin: change name of video device
  rcar-vin: move functions regarding scaling
  rcar-vin: all Gen2 boards can scale simplify logic
  rcar-vin: do not reset crop and compose when setting format
  rcar-vin: do not allow changing scaling and composing while streaming
  rcar-vin: read subdevice format for crop only when needed
  rcar-vin: fix handling of single field frames (top, bottom and
    alternate fields)
  rcar-vin: move media bus configuration to struct rvin_info
  rcar-vin: enable Gen3 hardware configuration
  rcar-vin: add function to manipulate Gen3 CHSEL value
  rcar-vin: add flag to switch to media controller mode
  rcar-vin: break out format alignment and checking
  rcar-vin: use different v4l2 operations in media controller mode
  rcar-vin: prepare for media controller mode initialization
  rcar-vin: add group allocator functions
  rcar-vin: add chsel information to rvin_info
  rcar-vin: parse Gen3 OF and setup media graph
  rcar-vin: add link notify for Gen3
  rcar-vin: extend {start,stop}_streaming to work with media controller
  rcar-vin: enable support for r8a7795
  rcar-vin: enable support for r8a7796

 .../devicetree/bindings/media/rcar_vin.txt         |  117 ++-
 drivers/media/platform/rcar-vin/Kconfig            |    2 +-
 drivers/media/platform/rcar-vin/rcar-core.c        | 1109 +++++++++++++++++++-
 drivers/media/platform/rcar-vin/rcar-dma.c         |  985 +++++++++--------
 drivers/media/platform/rcar-vin/rcar-v4l2.c        |  446 ++++----
 drivers/media/platform/rcar-vin/rcar-vin.h         |  125 ++-
 6 files changed, 2090 insertions(+), 694 deletions(-)

-- 
2.15.0

^ permalink raw reply	[flat|nested] 35+ messages in thread

* [PATCH v7 01/25] rcar-vin: add Gen3 devicetree bindings documentation
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-15 20:02   ` Rob Herring
  2017-11-11  0:38 ` [PATCH v7 02/25] rcar-vin: register the video device at probe time Niklas Söderlund
                   ` (23 subsequent siblings)
  24 siblings, 1 reply; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund, Rob Herring, devicetree

Document the devicetree bindings for the CSI-2 inputs available on Gen3.

There is a need to add a custom property 'renesas,id' and to define
which CSI-2 input is described in which endpoint under the port@1 node.
This information is needed since there are a set of predefined routes
between each VIN and CSI-2 block. This routing table will be kept
inside the driver but in order for it to act on it it must know which
VIN and CSI-2 is which.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 .../devicetree/bindings/media/rcar_vin.txt         | 116 ++++++++++++++++++---
 1 file changed, 104 insertions(+), 12 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index 6e4ef8caf759e5d3..df1abd0fb20386f8 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -2,8 +2,12 @@ Renesas R-Car Video Input driver (rcar_vin)
 -------------------------------------------
 
 The rcar_vin device provides video input capabilities for the Renesas R-Car
-family of devices. The current blocks are always slaves and suppot one input
-channel which can be either RGB, YUYV or BT656.
+family of devices.
+
+Each VIN instance has a single parallel input that supports RGB and YUV video,
+with both external synchronization and BT.656 synchronization for the latter.
+Depending on the instance the VIN input is connected to external SoC pins, or
+on Gen3 to a CSI-2 receiver.
 
  - compatible: Must be one or more of the following
    - "renesas,vin-r8a7795" for the R8A7795 device
@@ -28,21 +32,38 @@ channel which can be either RGB, YUYV or BT656.
 Additionally, an alias named vinX will need to be created to specify
 which video input device this is.
 
-The per-board settings:
+The per-board settings Gen2:
  - port sub-node describing a single endpoint connected to the vin
    as described in video-interfaces.txt[1]. Only the first one will
    be considered as each vin interface has one input port.
 
-   These settings are used to work out video input format and widths
-   into the system.
+The per-board settings Gen3:
+
+Gen3 can support both a single connected parallel input source from
+external SoC pins (port0) and/or multiple parallel input sources from
+local SoC CSI-2 receivers (port1) depending on SoC.
 
+- renesas,id - ID number of the VIN, VINx in the documentation.
+- ports
+    - port0 - sub-node describing a single endpoint connected to the VIN
+      from external SoC pins described in video-interfaces.txt[1]. Only
+      the first one will be considered as each VIN interface has at most
+      one set of SoC external input pins.
+    - port1 - sub-nodes describing one or more endpoints connected to
+      the VIN from local SoC CSI-2 receivers. The endpoint numbers must
+      use the following schema.
 
-Device node example
--------------------
+        - Endpoint 0 - sub-node describing the endpoint which is CSI20
+        - Endpoint 1 - sub-node describing the endpoint which is CSI21
+        - Endpoint 2 - sub-node describing the endpoint which is CSI40
+        - Endpoint 3 - sub-node describing the endpoint which is CSI41
 
-	aliases {
-	       vin0 = &vin0;
-	};
+Device node example Gen2
+------------------------
+
+        aliases {
+                vin0 = &vin0;
+        };
 
         vin0: vin@0xe6ef0000 {
                 compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
@@ -52,8 +73,8 @@ Device node example
                 status = "disabled";
         };
 
-Board setup example (vin1 composite video input)
-------------------------------------------------
+Board setup example Gen2 (vin1 composite video input)
+-----------------------------------------------------
 
 &i2c2   {
         status = "ok";
@@ -92,6 +113,77 @@ Board setup example (vin1 composite video input)
         };
 };
 
+Device node example Gen3
+------------------------
+
+        vin0: video@e6ef0000 {
+                compatible = "renesas,vin-r8a7795";
+                reg = <0 0xe6ef0000 0 0x1000>;
+                interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cpg CPG_MOD 811>;
+                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                resets = <&cpg 811>;
+                renesas,id = <0>;
+
+                ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@1 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+
+                                reg = <1>;
+
+                                vin0csi20: endpoint@0 {
+                                        reg = <0>;
+                                        remote-endpoint= <&csi20vin0>;
+                                };
+                                vin0csi21: endpoint@1 {
+                                        reg = <1>;
+                                        remote-endpoint= <&csi21vin0>;
+                                };
+                                vin0csi40: endpoint@2 {
+                                        reg = <2>;
+                                        remote-endpoint= <&csi40vin0>;
+                                };
+                        };
+                };
+        };
+
+        csi20: csi2@fea80000 {
+                compatible = "renesas,r8a7795-csi2", "renesas,rcar-gen3-csi2";
+                reg = <0 0xfea80000 0 0x10000>;
+                interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cpg CPG_MOD 714>;
+                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                resets = <&cpg 714>;
+
+                ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                                reg = <0>;
+                                csi20_in: endpoint {
+                                        clock-lanes = <0>;
+                                        data-lanes = <1>;
+                                        remote-endpoint = <&adv7482_txb>;
+                                };
+                        };
+
+                        port@1 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
 
+                                reg = <1>;
+
+                                csi20vin0: endpoint@0 {
+                                        reg = <0>;
+                                        remote-endpoint = <&vin0csi20>;
+                                };
+                        };
+                };
+        };
 
 [1] video-interfaces.txt common video media interface
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 02/25] rcar-vin: register the video device at probe time
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 01/25] rcar-vin: add Gen3 devicetree bindings documentation Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-17 11:39   ` Hans Verkuil
  2017-11-11  0:38 ` [PATCH v7 03/25] rcar-vin: move chip information to own struct Niklas Söderlund
                   ` (22 subsequent siblings)
  24 siblings, 1 reply; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

The driver registers the video device from the async complete callback
and unregistered in the async unbind callback. This creates problems if
if the subdevice is bound, unbound and later rebound. The second time
video_register_device() is called it fails:

   kobject (eb3be918): tried to init an initialized object, something is seriously wrong.

To prevent this register the video device at probe time and don't allow
user-space to open the video device if the subdevice is not bound yet.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 124 +++++++++++++++++++---------
 drivers/media/platform/rcar-vin/rcar-v4l2.c |  47 ++---------
 drivers/media/platform/rcar-vin/rcar-vin.h  |   5 +-
 3 files changed, 95 insertions(+), 81 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 108d776f32651b27..856df3e407c05d97 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -46,54 +46,18 @@ static int rvin_find_pad(struct v4l2_subdev *sd, int direction)
 	return -EINVAL;
 }
 
-static bool rvin_mbus_supported(struct rvin_graph_entity *entity)
-{
-	struct v4l2_subdev *sd = entity->subdev;
-	struct v4l2_subdev_mbus_code_enum code = {
-		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
-	};
-
-	code.index = 0;
-	code.pad = entity->source_pad;
-	while (!v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code)) {
-		code.index++;
-		switch (code.code) {
-		case MEDIA_BUS_FMT_YUYV8_1X16:
-		case MEDIA_BUS_FMT_UYVY8_2X8:
-		case MEDIA_BUS_FMT_UYVY10_2X10:
-		case MEDIA_BUS_FMT_RGB888_1X24:
-			entity->code = code.code;
-			return true;
-		default:
-			break;
-		}
-	}
-
-	return false;
-}
-
 static int rvin_digital_notify_complete(struct v4l2_async_notifier *notifier)
 {
 	struct rvin_dev *vin = notifier_to_vin(notifier);
 	int ret;
 
-	/* Verify subdevices mbus format */
-	if (!rvin_mbus_supported(vin->digital)) {
-		vin_err(vin, "Unsupported media bus format for %s\n",
-			vin->digital->subdev->name);
-		return -EINVAL;
-	}
-
-	vin_dbg(vin, "Found media bus format for %s: %d\n",
-		vin->digital->subdev->name, vin->digital->code);
-
 	ret = v4l2_device_register_subdev_nodes(&vin->v4l2_dev);
 	if (ret < 0) {
 		vin_err(vin, "Failed to register subdev nodes\n");
 		return ret;
 	}
 
-	return rvin_v4l2_probe(vin);
+	return 0;
 }
 
 static void rvin_digital_notify_unbind(struct v4l2_async_notifier *notifier,
@@ -103,8 +67,15 @@ static void rvin_digital_notify_unbind(struct v4l2_async_notifier *notifier,
 	struct rvin_dev *vin = notifier_to_vin(notifier);
 
 	vin_dbg(vin, "unbind digital subdev %s\n", subdev->name);
-	rvin_v4l2_remove(vin);
+
+	mutex_lock(&vin->lock);
+
+	vin->vdev.ctrl_handler = NULL;
+	v4l2_ctrl_handler_free(&vin->ctrl_handler);
+
 	vin->digital->subdev = NULL;
+
+	mutex_unlock(&vin->lock);
 }
 
 static int rvin_digital_notify_bound(struct v4l2_async_notifier *notifier,
@@ -112,12 +83,14 @@ static int rvin_digital_notify_bound(struct v4l2_async_notifier *notifier,
 				     struct v4l2_async_subdev *asd)
 {
 	struct rvin_dev *vin = notifier_to_vin(notifier);
+	struct v4l2_subdev_mbus_code_enum code = {
+		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+	};
 	int ret;
 
 	v4l2_set_subdev_hostdata(subdev, vin);
 
 	/* Find source and sink pad of remote subdevice */
-
 	ret = rvin_find_pad(subdev, MEDIA_PAD_FL_SOURCE);
 	if (ret < 0)
 		return ret;
@@ -126,21 +99,82 @@ static int rvin_digital_notify_bound(struct v4l2_async_notifier *notifier,
 	ret = rvin_find_pad(subdev, MEDIA_PAD_FL_SINK);
 	vin->digital->sink_pad = ret < 0 ? 0 : ret;
 
+	/* Find compatible subdevices mbus format */
+	vin->digital->code = 0;
+	code.index = 0;
+	code.pad = vin->digital->source_pad;
+	while (!vin->digital->code &&
+	       !v4l2_subdev_call(subdev, pad, enum_mbus_code, NULL, &code)) {
+		code.index++;
+		switch (code.code) {
+		case MEDIA_BUS_FMT_YUYV8_1X16:
+		case MEDIA_BUS_FMT_UYVY8_2X8:
+		case MEDIA_BUS_FMT_UYVY10_2X10:
+		case MEDIA_BUS_FMT_RGB888_1X24:
+			vin->digital->code = code.code;
+			vin_dbg(vin, "Found media bus format for %s: %d\n",
+				subdev->name, vin->digital->code);
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (!vin->digital->code) {
+		vin_err(vin, "Unsupported media bus format for %s\n",
+			subdev->name);
+		return -EINVAL;
+	}
+
+	/* Read tvnorms */
+	ret = v4l2_subdev_call(subdev, video, g_tvnorms, &vin->vdev.tvnorms);
+	if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
+		return ret;
+
+	/* Lock as to not race with open */
+	mutex_lock(&vin->lock);
+
+	/* Add the controls */
+	ret = v4l2_ctrl_handler_init(&vin->ctrl_handler, 16);
+	if (ret < 0)
+		goto err;
+
+	ret = v4l2_ctrl_add_handler(&vin->ctrl_handler, subdev->ctrl_handler,
+				    NULL);
+	if (ret < 0)
+		goto err_ctrl;
+
+	vin->vdev.ctrl_handler = &vin->ctrl_handler;
+
 	vin->digital->subdev = subdev;
 
+	ret = rvin_reset_format(vin);
+	if (ret)
+		goto err_subdev;
+
+	mutex_unlock(&vin->lock);
+
 	vin_dbg(vin, "bound subdev %s source pad: %u sink pad: %u\n",
 		subdev->name, vin->digital->source_pad,
 		vin->digital->sink_pad);
 
 	return 0;
+err_subdev:
+	vin->digital->subdev = NULL;
+	vin->vdev.ctrl_handler = NULL;
+err_ctrl:
+	v4l2_ctrl_handler_free(&vin->ctrl_handler);
+err:
+	mutex_unlock(&vin->lock);
+	return ret;
 }
+
 static const struct v4l2_async_notifier_operations rvin_digital_notify_ops = {
 	.bound = rvin_digital_notify_bound,
 	.unbind = rvin_digital_notify_unbind,
 	.complete = rvin_digital_notify_complete,
 };
 
-
 static int rvin_digital_parse_v4l2(struct device *dev,
 				   struct v4l2_fwnode_endpoint *vep,
 				   struct v4l2_async_subdev *asd)
@@ -189,7 +223,12 @@ static int rvin_digital_graph_init(struct rvin_dev *vin)
 	vin_dbg(vin, "Found digital subdevice %pOF\n",
 		to_of_node(vin->digital->asd.match.fwnode.fwnode));
 
+	ret = rvin_v4l2_register(vin);
+	if (ret)
+		return ret;
+
 	vin->notifier.ops = &rvin_digital_notify_ops;
+
 	ret = v4l2_async_notifier_register(&vin->v4l2_dev, &vin->notifier);
 	if (ret < 0) {
 		vin_err(vin, "Notifier registration failed\n");
@@ -275,6 +314,11 @@ static int rcar_vin_remove(struct platform_device *pdev)
 	v4l2_async_notifier_unregister(&vin->notifier);
 	v4l2_async_notifier_cleanup(&vin->notifier);
 
+	/* Checks internaly if handlers have been init or not */
+	v4l2_ctrl_handler_free(&vin->ctrl_handler);
+
+	rvin_v4l2_unregister(vin);
+
 	rvin_dma_remove(vin);
 
 	return 0;
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index b479b882da12f62d..33dd0ec0b82e57dc 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -103,7 +103,7 @@ static void rvin_reset_crop_compose(struct rvin_dev *vin)
 	vin->compose.height = vin->format.height;
 }
 
-static int rvin_reset_format(struct rvin_dev *vin)
+int rvin_reset_format(struct rvin_dev *vin)
 {
 	struct v4l2_subdev_format fmt = {
 		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
@@ -781,6 +781,11 @@ static int rvin_open(struct file *file)
 
 	mutex_lock(&vin->lock);
 
+	if (!vin->digital->subdev) {
+		ret = -ENODEV;
+		goto unlock;
+	}
+
 	file->private_data = vin;
 
 	ret = v4l2_fh_open(file);
@@ -839,14 +844,11 @@ static const struct v4l2_file_operations rvin_fops = {
 	.read		= vb2_fop_read,
 };
 
-void rvin_v4l2_remove(struct rvin_dev *vin)
+void rvin_v4l2_unregister(struct rvin_dev *vin)
 {
 	v4l2_info(&vin->v4l2_dev, "Removing %s\n",
 		  video_device_node_name(&vin->vdev));
 
-	/* Checks internaly if handlers have been init or not */
-	v4l2_ctrl_handler_free(&vin->ctrl_handler);
-
 	/* Checks internaly if vdev have been init or not */
 	video_unregister_device(&vin->vdev);
 }
@@ -866,44 +868,13 @@ static void rvin_notify(struct v4l2_subdev *sd,
 	}
 }
 
-int rvin_v4l2_probe(struct rvin_dev *vin)
+int rvin_v4l2_register(struct rvin_dev *vin)
 {
 	struct video_device *vdev = &vin->vdev;
-	struct v4l2_subdev *sd = vin_to_source(vin);
 	int ret;
 
-	v4l2_set_subdev_hostdata(sd, vin);
-
 	vin->v4l2_dev.notify = rvin_notify;
 
-	ret = v4l2_subdev_call(sd, video, g_tvnorms, &vin->vdev.tvnorms);
-	if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
-		return ret;
-
-	if (vin->vdev.tvnorms == 0) {
-		/* Disable the STD API if there are no tvnorms defined */
-		v4l2_disable_ioctl(&vin->vdev, VIDIOC_G_STD);
-		v4l2_disable_ioctl(&vin->vdev, VIDIOC_S_STD);
-		v4l2_disable_ioctl(&vin->vdev, VIDIOC_QUERYSTD);
-		v4l2_disable_ioctl(&vin->vdev, VIDIOC_ENUMSTD);
-	}
-
-	/* Add the controls */
-	/*
-	 * Currently the subdev with the largest number of controls (13) is
-	 * ov6550. So let's pick 16 as a hint for the control handler. Note
-	 * that this is a hint only: too large and you waste some memory, too
-	 * small and there is a (very) small performance hit when looking up
-	 * controls in the internal hash.
-	 */
-	ret = v4l2_ctrl_handler_init(&vin->ctrl_handler, 16);
-	if (ret < 0)
-		return ret;
-
-	ret = v4l2_ctrl_add_handler(&vin->ctrl_handler, sd->ctrl_handler, NULL);
-	if (ret < 0)
-		return ret;
-
 	/* video node */
 	vdev->fops = &rvin_fops;
 	vdev->v4l2_dev = &vin->v4l2_dev;
@@ -912,12 +883,10 @@ int rvin_v4l2_probe(struct rvin_dev *vin)
 	vdev->release = video_device_release_empty;
 	vdev->ioctl_ops = &rvin_ioctl_ops;
 	vdev->lock = &vin->lock;
-	vdev->ctrl_handler = &vin->ctrl_handler;
 	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
 		V4L2_CAP_READWRITE;
 
 	vin->format.pixelformat	= RVIN_DEFAULT_FORMAT;
-	rvin_reset_format(vin);
 
 	ret = video_register_device(&vin->vdev, VFL_TYPE_GRABBER, -1);
 	if (ret) {
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 5382078143fb3869..ab48cdf09889982e 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -156,8 +156,9 @@ struct rvin_dev {
 int rvin_dma_probe(struct rvin_dev *vin, int irq);
 void rvin_dma_remove(struct rvin_dev *vin);
 
-int rvin_v4l2_probe(struct rvin_dev *vin);
-void rvin_v4l2_remove(struct rvin_dev *vin);
+int rvin_v4l2_register(struct rvin_dev *vin);
+void rvin_v4l2_unregister(struct rvin_dev *vin);
+int rvin_reset_format(struct rvin_dev *vin);
 
 const struct rvin_video_format *rvin_format_from_pixel(u32 pixelformat);
 
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 03/25] rcar-vin: move chip information to own struct
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 01/25] rcar-vin: add Gen3 devicetree bindings documentation Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 02/25] rcar-vin: register the video device at probe time Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 04/25] rcar-vin: move max width and height information to chip information Niklas Söderlund
                   ` (21 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

When Gen3 support is added to the driver more than chip ID will be
different for the different SoCs. To avoid a lot of if statements in the
code create a struct chip_info to store this information.

And while we are at it sort the compatible string entries and make use
of of_device_get_match_data() which will always work as the driver is DT
only, so there's always a valid match.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 54 ++++++++++++++++++++++-------
 drivers/media/platform/rcar-vin/rcar-v4l2.c |  3 +-
 drivers/media/platform/rcar-vin/rcar-vin.h  | 12 +++++--
 3 files changed, 53 insertions(+), 16 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 856df3e407c05d97..e90e5d014e074d64 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -242,21 +242,53 @@ static int rvin_digital_graph_init(struct rvin_dev *vin)
  * Platform Device Driver
  */
 
+static const struct rvin_info rcar_info_h1 = {
+	.chip = RCAR_H1,
+};
+
+static const struct rvin_info rcar_info_m1 = {
+	.chip = RCAR_M1,
+};
+
+static const struct rvin_info rcar_info_gen2 = {
+	.chip = RCAR_GEN2,
+};
+
 static const struct of_device_id rvin_of_id_table[] = {
-	{ .compatible = "renesas,vin-r8a7794", .data = (void *)RCAR_GEN2 },
-	{ .compatible = "renesas,vin-r8a7793", .data = (void *)RCAR_GEN2 },
-	{ .compatible = "renesas,vin-r8a7791", .data = (void *)RCAR_GEN2 },
-	{ .compatible = "renesas,vin-r8a7790", .data = (void *)RCAR_GEN2 },
-	{ .compatible = "renesas,vin-r8a7779", .data = (void *)RCAR_H1 },
-	{ .compatible = "renesas,vin-r8a7778", .data = (void *)RCAR_M1 },
-	{ .compatible = "renesas,rcar-gen2-vin", .data = (void *)RCAR_GEN2 },
+	{
+		.compatible = "renesas,vin-r8a7778",
+		.data = &rcar_info_m1,
+	},
+	{
+		.compatible = "renesas,vin-r8a7779",
+		.data = &rcar_info_h1,
+	},
+	{
+		.compatible = "renesas,vin-r8a7790",
+		.data = &rcar_info_gen2,
+	},
+	{
+		.compatible = "renesas,vin-r8a7791",
+		.data = &rcar_info_gen2,
+	},
+	{
+		.compatible = "renesas,vin-r8a7793",
+		.data = &rcar_info_gen2,
+	},
+	{
+		.compatible = "renesas,vin-r8a7794",
+		.data = &rcar_info_gen2,
+	},
+	{
+		.compatible = "renesas,rcar-gen2-vin",
+		.data = &rcar_info_gen2,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, rvin_of_id_table);
 
 static int rcar_vin_probe(struct platform_device *pdev)
 {
-	const struct of_device_id *match;
 	struct rvin_dev *vin;
 	struct resource *mem;
 	int irq, ret;
@@ -265,12 +297,8 @@ static int rcar_vin_probe(struct platform_device *pdev)
 	if (!vin)
 		return -ENOMEM;
 
-	match = of_match_device(of_match_ptr(rvin_of_id_table), &pdev->dev);
-	if (!match)
-		return -ENODEV;
-
 	vin->dev = &pdev->dev;
-	vin->chip = (enum chip_id)match->data;
+	vin->info = of_device_get_match_data(&pdev->dev);
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (mem == NULL)
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 33dd0ec0b82e57dc..be00f4431493eb0a 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -266,7 +266,8 @@ static int __rvin_try_format(struct rvin_dev *vin,
 	pix->sizeimage = max_t(u32, pix->sizeimage,
 			       rvin_format_sizeimage(pix));
 
-	if (vin->chip == RCAR_M1 && pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
+	if (vin->info->chip == RCAR_M1 &&
+	    pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
 		vin_err(vin, "pixel format XBGR32 not supported on M1\n");
 		return -EINVAL;
 	}
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index ab48cdf09889982e..ab240eb4aad9176c 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -88,11 +88,19 @@ struct rvin_graph_entity {
 	unsigned int sink_pad;
 };
 
+/**
+ * struct rvin_info - Information about the particular VIN implementation
+ * @chip:		type of VIN chip
+ */
+struct rvin_info {
+	enum chip_id chip;
+};
+
 /**
  * struct rvin_dev - Renesas VIN device structure
  * @dev:		(OF) device
  * @base:		device I/O register space remapped to virtual memory
- * @chip:		type of VIN chip
+ * @info:		info about VIN instance
  *
  * @vdev:		V4L2 video device associated with VIN
  * @v4l2_dev:		V4L2 device
@@ -120,7 +128,7 @@ struct rvin_graph_entity {
 struct rvin_dev {
 	struct device *dev;
 	void __iomem *base;
-	enum chip_id chip;
+	const struct rvin_info *info;
 
 	struct video_device vdev;
 	struct v4l2_device v4l2_dev;
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 04/25] rcar-vin: move max width and height information to chip information
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (2 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 03/25] rcar-vin: move chip information to own struct Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 05/25] rcar-vin: change name of video device Niklas Söderlund
                   ` (20 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

On Gen3 the max supported width and height will be different from Gen2.
Move the limits to the struct rvin_info to prepare for Gen3 support.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 6 ++++++
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 6 ++----
 drivers/media/platform/rcar-vin/rcar-vin.h  | 6 ++++++
 3 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index e90e5d014e074d64..cb761057459caa3f 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -244,14 +244,20 @@ static int rvin_digital_graph_init(struct rvin_dev *vin)
 
 static const struct rvin_info rcar_info_h1 = {
 	.chip = RCAR_H1,
+	.max_width = 2048,
+	.max_height = 2048,
 };
 
 static const struct rvin_info rcar_info_m1 = {
 	.chip = RCAR_M1,
+	.max_width = 2048,
+	.max_height = 2048,
 };
 
 static const struct rvin_info rcar_info_gen2 = {
 	.chip = RCAR_GEN2,
+	.max_width = 2048,
+	.max_height = 2048,
 };
 
 static const struct of_device_id rvin_of_id_table[] = {
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index be00f4431493eb0a..76c0b8fa8602d08d 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -23,8 +23,6 @@
 #include "rcar-vin.h"
 
 #define RVIN_DEFAULT_FORMAT	V4L2_PIX_FMT_YUYV
-#define RVIN_MAX_WIDTH		2048
-#define RVIN_MAX_HEIGHT		2048
 
 /* -----------------------------------------------------------------------------
  * Format Conversions
@@ -258,8 +256,8 @@ static int __rvin_try_format(struct rvin_dev *vin,
 	walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
 
 	/* Limit to VIN capabilities */
-	v4l_bound_align_image(&pix->width, 2, RVIN_MAX_WIDTH, walign,
-			      &pix->height, 4, RVIN_MAX_HEIGHT, 2, 0);
+	v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
+			      &pix->height, 4, vin->info->max_height, 2, 0);
 
 	pix->bytesperline = max_t(u32, pix->bytesperline,
 				  rvin_format_bytesperline(pix));
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index ab240eb4aad9176c..e41dc3bff7fdc649 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -91,9 +91,15 @@ struct rvin_graph_entity {
 /**
  * struct rvin_info - Information about the particular VIN implementation
  * @chip:		type of VIN chip
+ *
+ * max_width:		max input width the VIN supports
+ * max_height:		max input height the VIN supports
  */
 struct rvin_info {
 	enum chip_id chip;
+
+	unsigned int max_width;
+	unsigned int max_height;
 };
 
 /**
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 05/25] rcar-vin: change name of video device
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (3 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 04/25] rcar-vin: move max width and height information to chip information Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 06/25] rcar-vin: move functions regarding scaling Niklas Söderlund
                   ` (19 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

The rcar-vin driver needs to be part of a media controller to support
Gen3. Give each VIN instance a unique name so it can be referenced from
userspace.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 76c0b8fa8602d08d..f501da9df48c288b 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -878,7 +878,8 @@ int rvin_v4l2_register(struct rvin_dev *vin)
 	vdev->fops = &rvin_fops;
 	vdev->v4l2_dev = &vin->v4l2_dev;
 	vdev->queue = &vin->queue;
-	strlcpy(vdev->name, KBUILD_MODNAME, sizeof(vdev->name));
+	snprintf(vdev->name, sizeof(vdev->name), "%s %s", KBUILD_MODNAME,
+		 dev_name(vin->dev));
 	vdev->release = video_device_release_empty;
 	vdev->ioctl_ops = &rvin_ioctl_ops;
 	vdev->lock = &vin->lock;
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 06/25] rcar-vin: move functions regarding scaling
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (4 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 05/25] rcar-vin: change name of video device Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 07/25] rcar-vin: all Gen2 boards can scale simplify logic Niklas Söderlund
                   ` (18 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

In preparation of refactoring the scaling code move the code regarding
scaling to to the top of the file to avoid the need to add forward
declarations. No code is changed in this commit only whole functions
moved inside the same file.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-dma.c | 806 +++++++++++++++--------------
 1 file changed, 405 insertions(+), 401 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 23fdff7a7370842e..b71259701d2da20f 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -138,305 +138,6 @@ static u32 rvin_read(struct rvin_dev *vin, u32 offset)
 	return ioread32(vin->base + offset);
 }
 
-static int rvin_setup(struct rvin_dev *vin)
-{
-	u32 vnmc, dmr, dmr2, interrupts;
-	v4l2_std_id std;
-	bool progressive = false, output_is_yuv = false, input_is_yuv = false;
-
-	switch (vin->format.field) {
-	case V4L2_FIELD_TOP:
-		vnmc = VNMC_IM_ODD;
-		break;
-	case V4L2_FIELD_BOTTOM:
-		vnmc = VNMC_IM_EVEN;
-		break;
-	case V4L2_FIELD_INTERLACED:
-		/* Default to TB */
-		vnmc = VNMC_IM_FULL;
-		/* Use BT if video standard can be read and is 60 Hz format */
-		if (!v4l2_subdev_call(vin_to_source(vin), video, g_std, &std)) {
-			if (std & V4L2_STD_525_60)
-				vnmc = VNMC_IM_FULL | VNMC_FOC;
-		}
-		break;
-	case V4L2_FIELD_INTERLACED_TB:
-		vnmc = VNMC_IM_FULL;
-		break;
-	case V4L2_FIELD_INTERLACED_BT:
-		vnmc = VNMC_IM_FULL | VNMC_FOC;
-		break;
-	case V4L2_FIELD_ALTERNATE:
-	case V4L2_FIELD_NONE:
-		if (vin->continuous) {
-			vnmc = VNMC_IM_ODD_EVEN;
-			progressive = true;
-		} else {
-			vnmc = VNMC_IM_ODD;
-		}
-		break;
-	default:
-		vnmc = VNMC_IM_ODD;
-		break;
-	}
-
-	/*
-	 * Input interface
-	 */
-	switch (vin->digital->code) {
-	case MEDIA_BUS_FMT_YUYV8_1X16:
-		/* BT.601/BT.1358 16bit YCbCr422 */
-		vnmc |= VNMC_INF_YUV16;
-		input_is_yuv = true;
-		break;
-	case MEDIA_BUS_FMT_UYVY8_2X8:
-		/* BT.656 8bit YCbCr422 or BT.601 8bit YCbCr422 */
-		vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
-			VNMC_INF_YUV8_BT656 : VNMC_INF_YUV8_BT601;
-		input_is_yuv = true;
-		break;
-	case MEDIA_BUS_FMT_RGB888_1X24:
-		vnmc |= VNMC_INF_RGB888;
-		break;
-	case MEDIA_BUS_FMT_UYVY10_2X10:
-		/* BT.656 10bit YCbCr422 or BT.601 10bit YCbCr422 */
-		vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
-			VNMC_INF_YUV10_BT656 : VNMC_INF_YUV10_BT601;
-		input_is_yuv = true;
-		break;
-	default:
-		break;
-	}
-
-	/* Enable VSYNC Field Toogle mode after one VSYNC input */
-	dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
-
-	/* Hsync Signal Polarity Select */
-	if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
-		dmr2 |= VNDMR2_HPS;
-
-	/* Vsync Signal Polarity Select */
-	if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
-		dmr2 |= VNDMR2_VPS;
-
-	/*
-	 * Output format
-	 */
-	switch (vin->format.pixelformat) {
-	case V4L2_PIX_FMT_NV16:
-		rvin_write(vin,
-			   ALIGN(vin->format.width * vin->format.height, 0x80),
-			   VNUVAOF_REG);
-		dmr = VNDMR_DTMD_YCSEP;
-		output_is_yuv = true;
-		break;
-	case V4L2_PIX_FMT_YUYV:
-		dmr = VNDMR_BPSM;
-		output_is_yuv = true;
-		break;
-	case V4L2_PIX_FMT_UYVY:
-		dmr = 0;
-		output_is_yuv = true;
-		break;
-	case V4L2_PIX_FMT_XRGB555:
-		dmr = VNDMR_DTMD_ARGB1555;
-		break;
-	case V4L2_PIX_FMT_RGB565:
-		dmr = 0;
-		break;
-	case V4L2_PIX_FMT_XBGR32:
-		/* Note: not supported on M1 */
-		dmr = VNDMR_EXRGB;
-		break;
-	default:
-		vin_err(vin, "Invalid pixelformat (0x%x)\n",
-			vin->format.pixelformat);
-		return -EINVAL;
-	}
-
-	/* Always update on field change */
-	vnmc |= VNMC_VUP;
-
-	/* If input and output use the same colorspace, use bypass mode */
-	if (input_is_yuv == output_is_yuv)
-		vnmc |= VNMC_BPS;
-
-	/* Progressive or interlaced mode */
-	interrupts = progressive ? VNIE_FIE : VNIE_EFE;
-
-	/* Ack interrupts */
-	rvin_write(vin, interrupts, VNINTS_REG);
-	/* Enable interrupts */
-	rvin_write(vin, interrupts, VNIE_REG);
-	/* Start capturing */
-	rvin_write(vin, dmr, VNDMR_REG);
-	rvin_write(vin, dmr2, VNDMR2_REG);
-
-	/* Enable module */
-	rvin_write(vin, vnmc | VNMC_ME, VNMC_REG);
-
-	return 0;
-}
-
-static void rvin_disable_interrupts(struct rvin_dev *vin)
-{
-	rvin_write(vin, 0, VNIE_REG);
-}
-
-static u32 rvin_get_interrupt_status(struct rvin_dev *vin)
-{
-	return rvin_read(vin, VNINTS_REG);
-}
-
-static void rvin_ack_interrupt(struct rvin_dev *vin)
-{
-	rvin_write(vin, rvin_read(vin, VNINTS_REG), VNINTS_REG);
-}
-
-static bool rvin_capture_active(struct rvin_dev *vin)
-{
-	return rvin_read(vin, VNMS_REG) & VNMS_CA;
-}
-
-static int rvin_get_active_slot(struct rvin_dev *vin, u32 vnms)
-{
-	if (vin->continuous)
-		return (vnms & VNMS_FBS_MASK) >> VNMS_FBS_SHIFT;
-
-	return 0;
-}
-
-static enum v4l2_field rvin_get_active_field(struct rvin_dev *vin, u32 vnms)
-{
-	if (vin->format.field == V4L2_FIELD_ALTERNATE) {
-		/* If FS is set it's a Even field */
-		if (vnms & VNMS_FS)
-			return V4L2_FIELD_BOTTOM;
-		return V4L2_FIELD_TOP;
-	}
-
-	return vin->format.field;
-}
-
-static void rvin_set_slot_addr(struct rvin_dev *vin, int slot, dma_addr_t addr)
-{
-	const struct rvin_video_format *fmt;
-	int offsetx, offsety;
-	dma_addr_t offset;
-
-	fmt = rvin_format_from_pixel(vin->format.pixelformat);
-
-	/*
-	 * There is no HW support for composition do the beast we can
-	 * by modifying the buffer offset
-	 */
-	offsetx = vin->compose.left * fmt->bpp;
-	offsety = vin->compose.top * vin->format.bytesperline;
-	offset = addr + offsetx + offsety;
-
-	/*
-	 * The address needs to be 128 bytes aligned. Driver should never accept
-	 * settings that do not satisfy this in the first place...
-	 */
-	if (WARN_ON((offsetx | offsety | offset) & HW_BUFFER_MASK))
-		return;
-
-	rvin_write(vin, offset, VNMB_REG(slot));
-}
-
-/* Moves a buffer from the queue to the HW slots */
-static bool rvin_fill_hw_slot(struct rvin_dev *vin, int slot)
-{
-	struct rvin_buffer *buf;
-	struct vb2_v4l2_buffer *vbuf;
-	dma_addr_t phys_addr_top;
-
-	if (vin->queue_buf[slot] != NULL)
-		return true;
-
-	if (list_empty(&vin->buf_list))
-		return false;
-
-	vin_dbg(vin, "Filling HW slot: %d\n", slot);
-
-	/* Keep track of buffer we give to HW */
-	buf = list_entry(vin->buf_list.next, struct rvin_buffer, list);
-	vbuf = &buf->vb;
-	list_del_init(to_buf_list(vbuf));
-	vin->queue_buf[slot] = vbuf;
-
-	/* Setup DMA */
-	phys_addr_top = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
-	rvin_set_slot_addr(vin, slot, phys_addr_top);
-
-	return true;
-}
-
-static bool rvin_fill_hw(struct rvin_dev *vin)
-{
-	int slot, limit;
-
-	limit = vin->continuous ? HW_BUFFER_NUM : 1;
-
-	for (slot = 0; slot < limit; slot++)
-		if (!rvin_fill_hw_slot(vin, slot))
-			return false;
-	return true;
-}
-
-static void rvin_capture_on(struct rvin_dev *vin)
-{
-	vin_dbg(vin, "Capture on in %s mode\n",
-		vin->continuous ? "continuous" : "single");
-
-	if (vin->continuous)
-		/* Continuous Frame Capture Mode */
-		rvin_write(vin, VNFC_C_FRAME, VNFC_REG);
-	else
-		/* Single Frame Capture Mode */
-		rvin_write(vin, VNFC_S_FRAME, VNFC_REG);
-}
-
-static int rvin_capture_start(struct rvin_dev *vin)
-{
-	struct rvin_buffer *buf, *node;
-	int bufs, ret;
-
-	/* Count number of free buffers */
-	bufs = 0;
-	list_for_each_entry_safe(buf, node, &vin->buf_list, list)
-		bufs++;
-
-	/* Continuous capture requires more buffers then there are HW slots */
-	vin->continuous = bufs > HW_BUFFER_NUM;
-
-	if (!rvin_fill_hw(vin)) {
-		vin_err(vin, "HW not ready to start, not enough buffers available\n");
-		return -EINVAL;
-	}
-
-	rvin_crop_scale_comp(vin);
-
-	ret = rvin_setup(vin);
-	if (ret)
-		return ret;
-
-	rvin_capture_on(vin);
-
-	vin->state = RUNNING;
-
-	return 0;
-}
-
-static void rvin_capture_stop(struct rvin_dev *vin)
-{
-	/* Set continuous & single transfer off */
-	rvin_write(vin, 0, VNFC_REG);
-
-	/* Disable module */
-	rvin_write(vin, rvin_read(vin, VNMC_REG) & ~VNMC_ME, VNMC_REG);
-}
-
 /* -----------------------------------------------------------------------------
  * Crop and Scaling Gen2
  */
@@ -757,139 +458,442 @@ static const struct vin_coeff vin_coeff_set[] = {
 			  0x0370e83b, 0x0310d439, 0x03a0f83d,
 			  0x0370e83c, 0x0300d438, 0x03b0fc3c },
 	}
-};
+};
+
+static void rvin_set_coeff(struct rvin_dev *vin, unsigned short xs)
+{
+	int i;
+	const struct vin_coeff *p_prev_set = NULL;
+	const struct vin_coeff *p_set = NULL;
+
+	/* Look for suitable coefficient values */
+	for (i = 0; i < ARRAY_SIZE(vin_coeff_set); i++) {
+		p_prev_set = p_set;
+		p_set = &vin_coeff_set[i];
+
+		if (xs < p_set->xs_value)
+			break;
+	}
+
+	/* Use previous value if its XS value is closer */
+	if (p_prev_set && p_set &&
+	    xs - p_prev_set->xs_value < p_set->xs_value - xs)
+		p_set = p_prev_set;
+
+	/* Set coefficient registers */
+	rvin_write(vin, p_set->coeff_set[0], VNC1A_REG);
+	rvin_write(vin, p_set->coeff_set[1], VNC1B_REG);
+	rvin_write(vin, p_set->coeff_set[2], VNC1C_REG);
+
+	rvin_write(vin, p_set->coeff_set[3], VNC2A_REG);
+	rvin_write(vin, p_set->coeff_set[4], VNC2B_REG);
+	rvin_write(vin, p_set->coeff_set[5], VNC2C_REG);
+
+	rvin_write(vin, p_set->coeff_set[6], VNC3A_REG);
+	rvin_write(vin, p_set->coeff_set[7], VNC3B_REG);
+	rvin_write(vin, p_set->coeff_set[8], VNC3C_REG);
+
+	rvin_write(vin, p_set->coeff_set[9], VNC4A_REG);
+	rvin_write(vin, p_set->coeff_set[10], VNC4B_REG);
+	rvin_write(vin, p_set->coeff_set[11], VNC4C_REG);
+
+	rvin_write(vin, p_set->coeff_set[12], VNC5A_REG);
+	rvin_write(vin, p_set->coeff_set[13], VNC5B_REG);
+	rvin_write(vin, p_set->coeff_set[14], VNC5C_REG);
+
+	rvin_write(vin, p_set->coeff_set[15], VNC6A_REG);
+	rvin_write(vin, p_set->coeff_set[16], VNC6B_REG);
+	rvin_write(vin, p_set->coeff_set[17], VNC6C_REG);
+
+	rvin_write(vin, p_set->coeff_set[18], VNC7A_REG);
+	rvin_write(vin, p_set->coeff_set[19], VNC7B_REG);
+	rvin_write(vin, p_set->coeff_set[20], VNC7C_REG);
+
+	rvin_write(vin, p_set->coeff_set[21], VNC8A_REG);
+	rvin_write(vin, p_set->coeff_set[22], VNC8B_REG);
+	rvin_write(vin, p_set->coeff_set[23], VNC8C_REG);
+}
+
+void rvin_crop_scale_comp(struct rvin_dev *vin)
+{
+	u32 xs, ys;
+
+	/* Set Start/End Pixel/Line Pre-Clip */
+	rvin_write(vin, vin->crop.left, VNSPPRC_REG);
+	rvin_write(vin, vin->crop.left + vin->crop.width - 1, VNEPPRC_REG);
+	switch (vin->format.field) {
+	case V4L2_FIELD_INTERLACED:
+	case V4L2_FIELD_INTERLACED_TB:
+	case V4L2_FIELD_INTERLACED_BT:
+		rvin_write(vin, vin->crop.top / 2, VNSLPRC_REG);
+		rvin_write(vin, (vin->crop.top + vin->crop.height) / 2 - 1,
+			   VNELPRC_REG);
+		break;
+	default:
+		rvin_write(vin, vin->crop.top, VNSLPRC_REG);
+		rvin_write(vin, vin->crop.top + vin->crop.height - 1,
+			   VNELPRC_REG);
+		break;
+	}
+
+	/* Set scaling coefficient */
+	ys = 0;
+	if (vin->crop.height != vin->compose.height)
+		ys = (4096 * vin->crop.height) / vin->compose.height;
+	rvin_write(vin, ys, VNYS_REG);
+
+	xs = 0;
+	if (vin->crop.width != vin->compose.width)
+		xs = (4096 * vin->crop.width) / vin->compose.width;
+
+	/* Horizontal upscaling is up to double size */
+	if (xs > 0 && xs < 2048)
+		xs = 2048;
+
+	rvin_write(vin, xs, VNXS_REG);
+
+	/* Horizontal upscaling is done out by scaling down from double size */
+	if (xs < 4096)
+		xs *= 2;
+
+	rvin_set_coeff(vin, xs);
+
+	/* Set Start/End Pixel/Line Post-Clip */
+	rvin_write(vin, 0, VNSPPOC_REG);
+	rvin_write(vin, 0, VNSLPOC_REG);
+	rvin_write(vin, vin->format.width - 1, VNEPPOC_REG);
+	switch (vin->format.field) {
+	case V4L2_FIELD_INTERLACED:
+	case V4L2_FIELD_INTERLACED_TB:
+	case V4L2_FIELD_INTERLACED_BT:
+		rvin_write(vin, vin->format.height / 2 - 1, VNELPOC_REG);
+		break;
+	default:
+		rvin_write(vin, vin->format.height - 1, VNELPOC_REG);
+		break;
+	}
+
+	if (vin->format.pixelformat == V4L2_PIX_FMT_NV16)
+		rvin_write(vin, ALIGN(vin->format.width, 0x20), VNIS_REG);
+	else
+		rvin_write(vin, ALIGN(vin->format.width, 0x10), VNIS_REG);
+
+	vin_dbg(vin,
+		"Pre-Clip: %ux%u@%u:%u YS: %d XS: %d Post-Clip: %ux%u@%u:%u\n",
+		vin->crop.width, vin->crop.height, vin->crop.left,
+		vin->crop.top, ys, xs, vin->format.width, vin->format.height,
+		0, 0);
+}
+
+void rvin_scale_try(struct rvin_dev *vin, struct v4l2_pix_format *pix,
+		    u32 width, u32 height)
+{
+	/* All VIN channels on Gen2 have scalers */
+	pix->width = width;
+	pix->height = height;
+}
+
+/* -----------------------------------------------------------------------------
+ * Hardware setup
+ */
+
+static int rvin_setup(struct rvin_dev *vin)
+{
+	u32 vnmc, dmr, dmr2, interrupts;
+	v4l2_std_id std;
+	bool progressive = false, output_is_yuv = false, input_is_yuv = false;
+
+	switch (vin->format.field) {
+	case V4L2_FIELD_TOP:
+		vnmc = VNMC_IM_ODD;
+		break;
+	case V4L2_FIELD_BOTTOM:
+		vnmc = VNMC_IM_EVEN;
+		break;
+	case V4L2_FIELD_INTERLACED:
+		/* Default to TB */
+		vnmc = VNMC_IM_FULL;
+		/* Use BT if video standard can be read and is 60 Hz format */
+		if (!v4l2_subdev_call(vin_to_source(vin), video, g_std, &std)) {
+			if (std & V4L2_STD_525_60)
+				vnmc = VNMC_IM_FULL | VNMC_FOC;
+		}
+		break;
+	case V4L2_FIELD_INTERLACED_TB:
+		vnmc = VNMC_IM_FULL;
+		break;
+	case V4L2_FIELD_INTERLACED_BT:
+		vnmc = VNMC_IM_FULL | VNMC_FOC;
+		break;
+	case V4L2_FIELD_ALTERNATE:
+	case V4L2_FIELD_NONE:
+		if (vin->continuous) {
+			vnmc = VNMC_IM_ODD_EVEN;
+			progressive = true;
+		} else {
+			vnmc = VNMC_IM_ODD;
+		}
+		break;
+	default:
+		vnmc = VNMC_IM_ODD;
+		break;
+	}
+
+	/*
+	 * Input interface
+	 */
+	switch (vin->digital->code) {
+	case MEDIA_BUS_FMT_YUYV8_1X16:
+		/* BT.601/BT.1358 16bit YCbCr422 */
+		vnmc |= VNMC_INF_YUV16;
+		input_is_yuv = true;
+		break;
+	case MEDIA_BUS_FMT_UYVY8_2X8:
+		/* BT.656 8bit YCbCr422 or BT.601 8bit YCbCr422 */
+		vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
+			VNMC_INF_YUV8_BT656 : VNMC_INF_YUV8_BT601;
+		input_is_yuv = true;
+		break;
+	case MEDIA_BUS_FMT_RGB888_1X24:
+		vnmc |= VNMC_INF_RGB888;
+		break;
+	case MEDIA_BUS_FMT_UYVY10_2X10:
+		/* BT.656 10bit YCbCr422 or BT.601 10bit YCbCr422 */
+		vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
+			VNMC_INF_YUV10_BT656 : VNMC_INF_YUV10_BT601;
+		input_is_yuv = true;
+		break;
+	default:
+		break;
+	}
+
+	/* Enable VSYNC Field Toogle mode after one VSYNC input */
+	dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
+
+	/* Hsync Signal Polarity Select */
+	if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
+		dmr2 |= VNDMR2_HPS;
+
+	/* Vsync Signal Polarity Select */
+	if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
+		dmr2 |= VNDMR2_VPS;
+
+	/*
+	 * Output format
+	 */
+	switch (vin->format.pixelformat) {
+	case V4L2_PIX_FMT_NV16:
+		rvin_write(vin,
+			   ALIGN(vin->format.width * vin->format.height, 0x80),
+			   VNUVAOF_REG);
+		dmr = VNDMR_DTMD_YCSEP;
+		output_is_yuv = true;
+		break;
+	case V4L2_PIX_FMT_YUYV:
+		dmr = VNDMR_BPSM;
+		output_is_yuv = true;
+		break;
+	case V4L2_PIX_FMT_UYVY:
+		dmr = 0;
+		output_is_yuv = true;
+		break;
+	case V4L2_PIX_FMT_XRGB555:
+		dmr = VNDMR_DTMD_ARGB1555;
+		break;
+	case V4L2_PIX_FMT_RGB565:
+		dmr = 0;
+		break;
+	case V4L2_PIX_FMT_XBGR32:
+		/* Note: not supported on M1 */
+		dmr = VNDMR_EXRGB;
+		break;
+	default:
+		vin_err(vin, "Invalid pixelformat (0x%x)\n",
+			vin->format.pixelformat);
+		return -EINVAL;
+	}
 
-static void rvin_set_coeff(struct rvin_dev *vin, unsigned short xs)
+	/* Always update on field change */
+	vnmc |= VNMC_VUP;
+
+	/* If input and output use the same colorspace, use bypass mode */
+	if (input_is_yuv == output_is_yuv)
+		vnmc |= VNMC_BPS;
+
+	/* Progressive or interlaced mode */
+	interrupts = progressive ? VNIE_FIE : VNIE_EFE;
+
+	/* Ack interrupts */
+	rvin_write(vin, interrupts, VNINTS_REG);
+	/* Enable interrupts */
+	rvin_write(vin, interrupts, VNIE_REG);
+	/* Start capturing */
+	rvin_write(vin, dmr, VNDMR_REG);
+	rvin_write(vin, dmr2, VNDMR2_REG);
+
+	/* Enable module */
+	rvin_write(vin, vnmc | VNMC_ME, VNMC_REG);
+
+	return 0;
+}
+
+static void rvin_disable_interrupts(struct rvin_dev *vin)
 {
-	int i;
-	const struct vin_coeff *p_prev_set = NULL;
-	const struct vin_coeff *p_set = NULL;
+	rvin_write(vin, 0, VNIE_REG);
+}
 
-	/* Look for suitable coefficient values */
-	for (i = 0; i < ARRAY_SIZE(vin_coeff_set); i++) {
-		p_prev_set = p_set;
-		p_set = &vin_coeff_set[i];
+static u32 rvin_get_interrupt_status(struct rvin_dev *vin)
+{
+	return rvin_read(vin, VNINTS_REG);
+}
 
-		if (xs < p_set->xs_value)
-			break;
+static void rvin_ack_interrupt(struct rvin_dev *vin)
+{
+	rvin_write(vin, rvin_read(vin, VNINTS_REG), VNINTS_REG);
+}
+
+static bool rvin_capture_active(struct rvin_dev *vin)
+{
+	return rvin_read(vin, VNMS_REG) & VNMS_CA;
+}
+
+static int rvin_get_active_slot(struct rvin_dev *vin, u32 vnms)
+{
+	if (vin->continuous)
+		return (vnms & VNMS_FBS_MASK) >> VNMS_FBS_SHIFT;
+
+	return 0;
+}
+
+static enum v4l2_field rvin_get_active_field(struct rvin_dev *vin, u32 vnms)
+{
+	if (vin->format.field == V4L2_FIELD_ALTERNATE) {
+		/* If FS is set it's a Even field */
+		if (vnms & VNMS_FS)
+			return V4L2_FIELD_BOTTOM;
+		return V4L2_FIELD_TOP;
 	}
 
-	/* Use previous value if its XS value is closer */
-	if (p_prev_set && p_set &&
-	    xs - p_prev_set->xs_value < p_set->xs_value - xs)
-		p_set = p_prev_set;
+	return vin->format.field;
+}
 
-	/* Set coefficient registers */
-	rvin_write(vin, p_set->coeff_set[0], VNC1A_REG);
-	rvin_write(vin, p_set->coeff_set[1], VNC1B_REG);
-	rvin_write(vin, p_set->coeff_set[2], VNC1C_REG);
+static void rvin_set_slot_addr(struct rvin_dev *vin, int slot, dma_addr_t addr)
+{
+	const struct rvin_video_format *fmt;
+	int offsetx, offsety;
+	dma_addr_t offset;
 
-	rvin_write(vin, p_set->coeff_set[3], VNC2A_REG);
-	rvin_write(vin, p_set->coeff_set[4], VNC2B_REG);
-	rvin_write(vin, p_set->coeff_set[5], VNC2C_REG);
+	fmt = rvin_format_from_pixel(vin->format.pixelformat);
 
-	rvin_write(vin, p_set->coeff_set[6], VNC3A_REG);
-	rvin_write(vin, p_set->coeff_set[7], VNC3B_REG);
-	rvin_write(vin, p_set->coeff_set[8], VNC3C_REG);
+	/*
+	 * There is no HW support for composition do the beast we can
+	 * by modifying the buffer offset
+	 */
+	offsetx = vin->compose.left * fmt->bpp;
+	offsety = vin->compose.top * vin->format.bytesperline;
+	offset = addr + offsetx + offsety;
 
-	rvin_write(vin, p_set->coeff_set[9], VNC4A_REG);
-	rvin_write(vin, p_set->coeff_set[10], VNC4B_REG);
-	rvin_write(vin, p_set->coeff_set[11], VNC4C_REG);
+	/*
+	 * The address needs to be 128 bytes aligned. Driver should never accept
+	 * settings that do not satisfy this in the first place...
+	 */
+	if (WARN_ON((offsetx | offsety | offset) & HW_BUFFER_MASK))
+		return;
 
-	rvin_write(vin, p_set->coeff_set[12], VNC5A_REG);
-	rvin_write(vin, p_set->coeff_set[13], VNC5B_REG);
-	rvin_write(vin, p_set->coeff_set[14], VNC5C_REG);
+	rvin_write(vin, offset, VNMB_REG(slot));
+}
 
-	rvin_write(vin, p_set->coeff_set[15], VNC6A_REG);
-	rvin_write(vin, p_set->coeff_set[16], VNC6B_REG);
-	rvin_write(vin, p_set->coeff_set[17], VNC6C_REG);
+/* Moves a buffer from the queue to the HW slots */
+static bool rvin_fill_hw_slot(struct rvin_dev *vin, int slot)
+{
+	struct rvin_buffer *buf;
+	struct vb2_v4l2_buffer *vbuf;
+	dma_addr_t phys_addr_top;
 
-	rvin_write(vin, p_set->coeff_set[18], VNC7A_REG);
-	rvin_write(vin, p_set->coeff_set[19], VNC7B_REG);
-	rvin_write(vin, p_set->coeff_set[20], VNC7C_REG);
+	if (vin->queue_buf[slot] != NULL)
+		return true;
 
-	rvin_write(vin, p_set->coeff_set[21], VNC8A_REG);
-	rvin_write(vin, p_set->coeff_set[22], VNC8B_REG);
-	rvin_write(vin, p_set->coeff_set[23], VNC8C_REG);
+	if (list_empty(&vin->buf_list))
+		return false;
+
+	vin_dbg(vin, "Filling HW slot: %d\n", slot);
+
+	/* Keep track of buffer we give to HW */
+	buf = list_entry(vin->buf_list.next, struct rvin_buffer, list);
+	vbuf = &buf->vb;
+	list_del_init(to_buf_list(vbuf));
+	vin->queue_buf[slot] = vbuf;
+
+	/* Setup DMA */
+	phys_addr_top = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
+	rvin_set_slot_addr(vin, slot, phys_addr_top);
+
+	return true;
 }
 
-void rvin_crop_scale_comp(struct rvin_dev *vin)
+static bool rvin_fill_hw(struct rvin_dev *vin)
 {
-	u32 xs, ys;
+	int slot, limit;
 
-	/* Set Start/End Pixel/Line Pre-Clip */
-	rvin_write(vin, vin->crop.left, VNSPPRC_REG);
-	rvin_write(vin, vin->crop.left + vin->crop.width - 1, VNEPPRC_REG);
-	switch (vin->format.field) {
-	case V4L2_FIELD_INTERLACED:
-	case V4L2_FIELD_INTERLACED_TB:
-	case V4L2_FIELD_INTERLACED_BT:
-		rvin_write(vin, vin->crop.top / 2, VNSLPRC_REG);
-		rvin_write(vin, (vin->crop.top + vin->crop.height) / 2 - 1,
-			   VNELPRC_REG);
-		break;
-	default:
-		rvin_write(vin, vin->crop.top, VNSLPRC_REG);
-		rvin_write(vin, vin->crop.top + vin->crop.height - 1,
-			   VNELPRC_REG);
-		break;
-	}
+	limit = vin->continuous ? HW_BUFFER_NUM : 1;
 
-	/* Set scaling coefficient */
-	ys = 0;
-	if (vin->crop.height != vin->compose.height)
-		ys = (4096 * vin->crop.height) / vin->compose.height;
-	rvin_write(vin, ys, VNYS_REG);
+	for (slot = 0; slot < limit; slot++)
+		if (!rvin_fill_hw_slot(vin, slot))
+			return false;
+	return true;
+}
 
-	xs = 0;
-	if (vin->crop.width != vin->compose.width)
-		xs = (4096 * vin->crop.width) / vin->compose.width;
+static void rvin_capture_on(struct rvin_dev *vin)
+{
+	vin_dbg(vin, "Capture on in %s mode\n",
+		vin->continuous ? "continuous" : "single");
 
-	/* Horizontal upscaling is up to double size */
-	if (xs > 0 && xs < 2048)
-		xs = 2048;
+	if (vin->continuous)
+		/* Continuous Frame Capture Mode */
+		rvin_write(vin, VNFC_C_FRAME, VNFC_REG);
+	else
+		/* Single Frame Capture Mode */
+		rvin_write(vin, VNFC_S_FRAME, VNFC_REG);
+}
 
-	rvin_write(vin, xs, VNXS_REG);
+static int rvin_capture_start(struct rvin_dev *vin)
+{
+	struct rvin_buffer *buf, *node;
+	int bufs, ret;
 
-	/* Horizontal upscaling is done out by scaling down from double size */
-	if (xs < 4096)
-		xs *= 2;
+	/* Count number of free buffers */
+	bufs = 0;
+	list_for_each_entry_safe(buf, node, &vin->buf_list, list)
+		bufs++;
 
-	rvin_set_coeff(vin, xs);
+	/* Continuous capture requires more buffers then there are HW slots */
+	vin->continuous = bufs > HW_BUFFER_NUM;
 
-	/* Set Start/End Pixel/Line Post-Clip */
-	rvin_write(vin, 0, VNSPPOC_REG);
-	rvin_write(vin, 0, VNSLPOC_REG);
-	rvin_write(vin, vin->format.width - 1, VNEPPOC_REG);
-	switch (vin->format.field) {
-	case V4L2_FIELD_INTERLACED:
-	case V4L2_FIELD_INTERLACED_TB:
-	case V4L2_FIELD_INTERLACED_BT:
-		rvin_write(vin, vin->format.height / 2 - 1, VNELPOC_REG);
-		break;
-	default:
-		rvin_write(vin, vin->format.height - 1, VNELPOC_REG);
-		break;
+	if (!rvin_fill_hw(vin)) {
+		vin_err(vin, "HW not ready to start, not enough buffers available\n");
+		return -EINVAL;
 	}
 
-	if (vin->format.pixelformat == V4L2_PIX_FMT_NV16)
-		rvin_write(vin, ALIGN(vin->format.width, 0x20), VNIS_REG);
-	else
-		rvin_write(vin, ALIGN(vin->format.width, 0x10), VNIS_REG);
+	rvin_crop_scale_comp(vin);
 
-	vin_dbg(vin,
-		"Pre-Clip: %ux%u@%u:%u YS: %d XS: %d Post-Clip: %ux%u@%u:%u\n",
-		vin->crop.width, vin->crop.height, vin->crop.left,
-		vin->crop.top, ys, xs, vin->format.width, vin->format.height,
-		0, 0);
+	ret = rvin_setup(vin);
+	if (ret)
+		return ret;
+
+	rvin_capture_on(vin);
+
+	vin->state = RUNNING;
+
+	return 0;
 }
 
-void rvin_scale_try(struct rvin_dev *vin, struct v4l2_pix_format *pix,
-		    u32 width, u32 height)
+static void rvin_capture_stop(struct rvin_dev *vin)
 {
-	/* All VIN channels on Gen2 have scalers */
-	pix->width = width;
-	pix->height = height;
+	/* Set continuous & single transfer off */
+	rvin_write(vin, 0, VNFC_REG);
+
+	/* Disable module */
+	rvin_write(vin, rvin_read(vin, VNMC_REG) & ~VNMC_ME, VNMC_REG);
 }
 
 /* -----------------------------------------------------------------------------
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 07/25] rcar-vin: all Gen2 boards can scale simplify logic
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (5 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 06/25] rcar-vin: move functions regarding scaling Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 08/25] rcar-vin: do not reset crop and compose when setting format Niklas Söderlund
                   ` (17 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

The logic to preserve the requested format width and height are too
complex and come from a premature optimization for Gen3. All Gen2 SoC
can scale and the Gen3 implementation will not use these functions at
all so simply preserve the width and height when interacting with the
subdevice much like the field is preserved simplifies the logic quite a
bit.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-dma.c  |  8 --------
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 22 ++++++++++------------
 drivers/media/platform/rcar-vin/rcar-vin.h  |  2 --
 3 files changed, 10 insertions(+), 22 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index b71259701d2da20f..daf01bb32b5fc3c2 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -585,14 +585,6 @@ void rvin_crop_scale_comp(struct rvin_dev *vin)
 		0, 0);
 }
 
-void rvin_scale_try(struct rvin_dev *vin, struct v4l2_pix_format *pix,
-		    u32 width, u32 height)
-{
-	/* All VIN channels on Gen2 have scalers */
-	pix->width = width;
-	pix->height = height;
-}
-
 /* -----------------------------------------------------------------------------
  * Hardware setup
  */
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index f501da9df48c288b..02b081d2d8826e90 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -166,6 +166,7 @@ static int __rvin_try_format_source(struct rvin_dev *vin,
 		.which = which,
 	};
 	enum v4l2_field field;
+	u32 width, height;
 	int ret;
 
 	sd = vin_to_source(vin);
@@ -178,7 +179,10 @@ static int __rvin_try_format_source(struct rvin_dev *vin,
 
 	format.pad = vin->digital->source_pad;
 
+	/* Allow the video device to override field and to scale */
 	field = pix->field;
+	width = pix->width;
+	height = pix->height;
 
 	ret = v4l2_subdev_call(sd, pad, set_fmt, pad_cfg, &format);
 	if (ret < 0 && ret != -ENOIOCTLCMD)
@@ -191,6 +195,9 @@ static int __rvin_try_format_source(struct rvin_dev *vin,
 	source->width = pix->width;
 	source->height = pix->height;
 
+	pix->width = width;
+	pix->height = height;
+
 	vin_dbg(vin, "Source resolution: %ux%u\n", source->width,
 		source->height);
 
@@ -204,13 +211,9 @@ static int __rvin_try_format(struct rvin_dev *vin,
 			     struct v4l2_pix_format *pix,
 			     struct rvin_source_fmt *source)
 {
-	u32 rwidth, rheight, walign;
+	u32 walign;
 	int ret;
 
-	/* Requested */
-	rwidth = pix->width;
-	rheight = pix->height;
-
 	/* Keep current field if no specific one is asked for */
 	if (pix->field == V4L2_FIELD_ANY)
 		pix->field = vin->format.field;
@@ -248,10 +251,6 @@ static int __rvin_try_format(struct rvin_dev *vin,
 		break;
 	}
 
-	/* If source can't match format try if VIN can scale */
-	if (source->width != rwidth || source->height != rheight)
-		rvin_scale_try(vin, pix, rwidth, rheight);
-
 	/* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
 	walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
 
@@ -270,9 +269,8 @@ static int __rvin_try_format(struct rvin_dev *vin,
 		return -EINVAL;
 	}
 
-	vin_dbg(vin, "Requested %ux%u Got %ux%u bpl: %d size: %d\n",
-		rwidth, rheight, pix->width, pix->height,
-		pix->bytesperline, pix->sizeimage);
+	vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
+		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
 
 	return 0;
 }
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index e41dc3bff7fdc649..80f38b89ed8d9992 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -177,8 +177,6 @@ int rvin_reset_format(struct rvin_dev *vin);
 const struct rvin_video_format *rvin_format_from_pixel(u32 pixelformat);
 
 /* Cropping, composing and scaling */
-void rvin_scale_try(struct rvin_dev *vin, struct v4l2_pix_format *pix,
-		    u32 width, u32 height);
 void rvin_crop_scale_comp(struct rvin_dev *vin);
 
 #endif
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 08/25] rcar-vin: do not reset crop and compose when setting format
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (6 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 07/25] rcar-vin: all Gen2 boards can scale simplify logic Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 09/25] rcar-vin: do not allow changing scaling and composing while streaming Niklas Söderlund
                   ` (16 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

It was a bad idea to reset the crop and compose settings when a new
format is set. This would overwrite any crop/compose set by s_select and
cause unexpected behaviors, remove it. Also fold the reset helper in to
the only remaining caller.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 02b081d2d8826e90..25f2386cb67447f2 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -90,17 +90,6 @@ static u32 rvin_format_sizeimage(struct v4l2_pix_format *pix)
  * V4L2
  */
 
-static void rvin_reset_crop_compose(struct rvin_dev *vin)
-{
-	vin->crop.top = vin->crop.left = 0;
-	vin->crop.width = vin->source.width;
-	vin->crop.height = vin->source.height;
-
-	vin->compose.top = vin->compose.left = 0;
-	vin->compose.width = vin->format.width;
-	vin->compose.height = vin->format.height;
-}
-
 int rvin_reset_format(struct rvin_dev *vin)
 {
 	struct v4l2_subdev_format fmt = {
@@ -147,7 +136,13 @@ int rvin_reset_format(struct rvin_dev *vin)
 		break;
 	}
 
-	rvin_reset_crop_compose(vin);
+	vin->crop.top = vin->crop.left = 0;
+	vin->crop.width = mf->width;
+	vin->crop.height = mf->height;
+
+	vin->compose.top = vin->compose.left = 0;
+	vin->compose.width = mf->width;
+	vin->compose.height = mf->height;
 
 	vin->format.bytesperline = rvin_format_bytesperline(&vin->format);
 	vin->format.sizeimage = rvin_format_sizeimage(&vin->format);
@@ -317,8 +312,6 @@ static int rvin_s_fmt_vid_cap(struct file *file, void *priv,
 
 	vin->format = f->fmt.pix;
 
-	rvin_reset_crop_compose(vin);
-
 	return 0;
 }
 
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 09/25] rcar-vin: do not allow changing scaling and composing while streaming
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (7 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 08/25] rcar-vin: do not reset crop and compose when setting format Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 10/25] rcar-vin: read subdevice format for crop only when needed Niklas Söderlund
                   ` (15 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

It is possible on Gen2 to change the registers controlling composing and
scaling while the stream is running. It is however not a good idea to do
so and could result in trouble. There are also no good reasons to allow
this, remove immediate reflection in hardware registers from
vidioc_s_selection and only configure scaling and composing when the
stream starts.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-dma.c  | 2 +-
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 3 ---
 drivers/media/platform/rcar-vin/rcar-vin.h  | 3 ---
 3 files changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index daf01bb32b5fc3c2..b478eda84a27bf09 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -514,7 +514,7 @@ static void rvin_set_coeff(struct rvin_dev *vin, unsigned short xs)
 	rvin_write(vin, p_set->coeff_set[23], VNC8C_REG);
 }
 
-void rvin_crop_scale_comp(struct rvin_dev *vin)
+static void rvin_crop_scale_comp(struct rvin_dev *vin)
 {
 	u32 xs, ys;
 
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 25f2386cb67447f2..b3c23634e9dbe095 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -436,9 +436,6 @@ static int rvin_s_selection(struct file *file, void *fh,
 		return -EINVAL;
 	}
 
-	/* HW supports modifying configuration while running */
-	rvin_crop_scale_comp(vin);
-
 	return 0;
 }
 
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 80f38b89ed8d9992..111dd8a1974253af 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -176,7 +176,4 @@ int rvin_reset_format(struct rvin_dev *vin);
 
 const struct rvin_video_format *rvin_format_from_pixel(u32 pixelformat);
 
-/* Cropping, composing and scaling */
-void rvin_crop_scale_comp(struct rvin_dev *vin);
-
 #endif
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 10/25] rcar-vin: read subdevice format for crop only when needed
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (8 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 09/25] rcar-vin: do not allow changing scaling and composing while streaming Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 11/25] rcar-vin: fix handling of single field frames (top, bottom and alternate fields) Niklas Söderlund
                   ` (14 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

Instead of caching the subdevice format each time the video device
format is set read it directly when it's needed. As it turns out the
format is only needed when figuring out the max rectangle for cropping.

This simplifies the code and makes it clearer what the source format is
used for.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 88 ++++++++++++++---------------
 drivers/media/platform/rcar-vin/rcar-vin.h  | 12 ----
 2 files changed, 42 insertions(+), 58 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index b3c23634e9dbe095..ee5df05df2e9561f 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -90,24 +90,30 @@ static u32 rvin_format_sizeimage(struct v4l2_pix_format *pix)
  * V4L2
  */
 
-int rvin_reset_format(struct rvin_dev *vin)
+static int rvin_get_sd_format(struct rvin_dev *vin, struct v4l2_pix_format *pix)
 {
 	struct v4l2_subdev_format fmt = {
 		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+		.pad = vin->digital->source_pad,
 	};
-	struct v4l2_mbus_framefmt *mf = &fmt.format;
 	int ret;
 
-	fmt.pad = vin->digital->source_pad;
-
 	ret = v4l2_subdev_call(vin_to_source(vin), pad, get_fmt, NULL, &fmt);
 	if (ret)
 		return ret;
 
-	vin->format.width	= mf->width;
-	vin->format.height	= mf->height;
-	vin->format.colorspace	= mf->colorspace;
-	vin->format.field	= mf->field;
+	v4l2_fill_pix_format(pix, &fmt.format);
+
+	return 0;
+}
+
+int rvin_reset_format(struct rvin_dev *vin)
+{
+	int ret;
+
+	ret = rvin_get_sd_format(vin, &vin->format);
+	if (ret)
+		return ret;
 
 	/*
 	 * If the subdevice uses ALTERNATE field mode and G_STD is
@@ -137,12 +143,12 @@ int rvin_reset_format(struct rvin_dev *vin)
 	}
 
 	vin->crop.top = vin->crop.left = 0;
-	vin->crop.width = mf->width;
-	vin->crop.height = mf->height;
+	vin->crop.width = vin->format.width;
+	vin->crop.height = vin->format.height;
 
 	vin->compose.top = vin->compose.left = 0;
-	vin->compose.width = mf->width;
-	vin->compose.height = mf->height;
+	vin->compose.width = vin->format.width;
+	vin->compose.height = vin->format.height;
 
 	vin->format.bytesperline = rvin_format_bytesperline(&vin->format);
 	vin->format.sizeimage = rvin_format_sizeimage(&vin->format);
@@ -151,9 +157,7 @@ int rvin_reset_format(struct rvin_dev *vin)
 }
 
 static int __rvin_try_format_source(struct rvin_dev *vin,
-				    u32 which,
-				    struct v4l2_pix_format *pix,
-				    struct rvin_source_fmt *source)
+				    u32 which, struct v4l2_pix_format *pix)
 {
 	struct v4l2_subdev *sd;
 	struct v4l2_subdev_pad_config *pad_cfg;
@@ -186,25 +190,15 @@ static int __rvin_try_format_source(struct rvin_dev *vin,
 	v4l2_fill_pix_format(pix, &format.format);
 
 	pix->field = field;
-
-	source->width = pix->width;
-	source->height = pix->height;
-
 	pix->width = width;
 	pix->height = height;
-
-	vin_dbg(vin, "Source resolution: %ux%u\n", source->width,
-		source->height);
-
 done:
 	v4l2_subdev_free_pad_config(pad_cfg);
 	return ret;
 }
 
 static int __rvin_try_format(struct rvin_dev *vin,
-			     u32 which,
-			     struct v4l2_pix_format *pix,
-			     struct rvin_source_fmt *source)
+			     u32 which, struct v4l2_pix_format *pix)
 {
 	u32 walign;
 	int ret;
@@ -225,7 +219,7 @@ static int __rvin_try_format(struct rvin_dev *vin,
 	pix->sizeimage = 0;
 
 	/* Limit to source capabilities */
-	ret = __rvin_try_format_source(vin, which, pix, source);
+	ret = __rvin_try_format_source(vin, which, pix);
 	if (ret)
 		return ret;
 
@@ -234,7 +228,6 @@ static int __rvin_try_format(struct rvin_dev *vin,
 	case V4L2_FIELD_BOTTOM:
 	case V4L2_FIELD_ALTERNATE:
 		pix->height /= 2;
-		source->height /= 2;
 		break;
 	case V4L2_FIELD_NONE:
 	case V4L2_FIELD_INTERLACED_TB:
@@ -286,30 +279,23 @@ static int rvin_try_fmt_vid_cap(struct file *file, void *priv,
 				struct v4l2_format *f)
 {
 	struct rvin_dev *vin = video_drvdata(file);
-	struct rvin_source_fmt source;
 
-	return __rvin_try_format(vin, V4L2_SUBDEV_FORMAT_TRY, &f->fmt.pix,
-				 &source);
+	return __rvin_try_format(vin, V4L2_SUBDEV_FORMAT_TRY, &f->fmt.pix);
 }
 
 static int rvin_s_fmt_vid_cap(struct file *file, void *priv,
 			      struct v4l2_format *f)
 {
 	struct rvin_dev *vin = video_drvdata(file);
-	struct rvin_source_fmt source;
 	int ret;
 
 	if (vb2_is_busy(&vin->queue))
 		return -EBUSY;
 
-	ret = __rvin_try_format(vin, V4L2_SUBDEV_FORMAT_ACTIVE, &f->fmt.pix,
-				&source);
+	ret = __rvin_try_format(vin, V4L2_SUBDEV_FORMAT_ACTIVE, &f->fmt.pix);
 	if (ret)
 		return ret;
 
-	vin->source.width = source.width;
-	vin->source.height = source.height;
-
 	vin->format = f->fmt.pix;
 
 	return 0;
@@ -340,6 +326,8 @@ static int rvin_g_selection(struct file *file, void *fh,
 			    struct v4l2_selection *s)
 {
 	struct rvin_dev *vin = video_drvdata(file);
+	struct v4l2_pix_format pix;
+	int ret;
 
 	if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
@@ -347,9 +335,12 @@ static int rvin_g_selection(struct file *file, void *fh,
 	switch (s->target) {
 	case V4L2_SEL_TGT_CROP_BOUNDS:
 	case V4L2_SEL_TGT_CROP_DEFAULT:
+		ret = rvin_get_sd_format(vin, &pix);
+		if (ret)
+			return ret;
 		s->r.left = s->r.top = 0;
-		s->r.width = vin->source.width;
-		s->r.height = vin->source.height;
+		s->r.width = pix.width;
+		s->r.height = pix.height;
 		break;
 	case V4L2_SEL_TGT_CROP:
 		s->r = vin->crop;
@@ -375,12 +366,14 @@ static int rvin_s_selection(struct file *file, void *fh,
 {
 	struct rvin_dev *vin = video_drvdata(file);
 	const struct rvin_video_format *fmt;
+	struct v4l2_pix_format pix;
 	struct v4l2_rect r = s->r;
 	struct v4l2_rect max_rect;
 	struct v4l2_rect min_rect = {
 		.width = 6,
 		.height = 2,
 	};
+	int ret;
 
 	if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
@@ -390,22 +383,25 @@ static int rvin_s_selection(struct file *file, void *fh,
 	switch (s->target) {
 	case V4L2_SEL_TGT_CROP:
 		/* Can't crop outside of source input */
+		ret = rvin_get_sd_format(vin, &pix);
+		if (ret)
+			return ret;
 		max_rect.top = max_rect.left = 0;
-		max_rect.width = vin->source.width;
-		max_rect.height = vin->source.height;
+		max_rect.width = pix.width;
+		max_rect.height = pix.height;
 		v4l2_rect_map_inside(&r, &max_rect);
 
-		v4l_bound_align_image(&r.width, 2, vin->source.width, 1,
-				      &r.height, 4, vin->source.height, 2, 0);
+		v4l_bound_align_image(&r.width, 2, pix.width, 1,
+				      &r.height, 4, pix.height, 2, 0);
 
-		r.top  = clamp_t(s32, r.top, 0, vin->source.height - r.height);
-		r.left = clamp_t(s32, r.left, 0, vin->source.width - r.width);
+		r.top  = clamp_t(s32, r.top, 0, pix.height - r.height);
+		r.left = clamp_t(s32, r.left, 0, pix.width - r.width);
 
 		vin->crop = s->r = r;
 
 		vin_dbg(vin, "Cropped %dx%d@%d:%d of %dx%d\n",
 			r.width, r.height, r.left, r.top,
-			vin->source.width, vin->source.height);
+			pix.width, pix.height);
 		break;
 	case V4L2_SEL_TGT_COMPOSE:
 		/* Make sure compose rect fits inside output format */
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 111dd8a1974253af..b97391c414d01bb0 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -48,16 +48,6 @@ enum rvin_dma_state {
 	STOPPING,
 };
 
-/**
- * struct rvin_source_fmt - Source information
- * @width:	Width from source
- * @height:	Height from source
- */
-struct rvin_source_fmt {
-	u32 width;
-	u32 height;
-};
-
 /**
  * struct rvin_video_format - Data format stored in memory
  * @fourcc:	Pixelformat
@@ -125,7 +115,6 @@ struct rvin_info {
  * @sequence:		V4L2 buffers sequence number
  * @state:		keeps track of operation state
  *
- * @source:		active format from the video source
  * @format:		active V4L2 pixel format
  *
  * @crop:		active cropping
@@ -152,7 +141,6 @@ struct rvin_dev {
 	unsigned int sequence;
 	enum rvin_dma_state state;
 
-	struct rvin_source_fmt source;
 	struct v4l2_pix_format format;
 
 	struct v4l2_rect crop;
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 11/25] rcar-vin: fix handling of single field frames (top, bottom and alternate fields)
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (9 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 10/25] rcar-vin: read subdevice format for crop only when needed Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 12/25] rcar-vin: move media bus configuration to struct rvin_info Niklas Söderlund
                   ` (13 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

There was never proper support in the VIN driver to deliver ALTERNATING
field format to user-space, remove this field option. For sources using
this field format instead use the VIN hardware feature of combining the
fields to an interlaced format. This mode of operation was previously
the default behavior and ALTERNATING was only delivered to user-space if
explicitly requested. Allowing this to be explicitly requested was a
mistake and was never properly tested and never worked due to the
constraints put on the field format when it comes to sequence numbers and
timestamps etc.

The height should not be cut in half for the format for TOP or BOTTOM
fields settings. This was a mistake and it was made visible by the
scaling refactoring. Correct behavior is that the user should request a
frame size that fits the half height frame reflected in the field
setting. If not the VIN will do its best to scale the top or bottom to
the requested format and cropping and scaling do not work as expected.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-dma.c  | 15 +--------
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 48 +++++++++++------------------
 2 files changed, 19 insertions(+), 44 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index b478eda84a27bf09..506d51a13b4f5f40 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -617,7 +617,6 @@ static int rvin_setup(struct rvin_dev *vin)
 	case V4L2_FIELD_INTERLACED_BT:
 		vnmc = VNMC_IM_FULL | VNMC_FOC;
 		break;
-	case V4L2_FIELD_ALTERNATE:
 	case V4L2_FIELD_NONE:
 		if (vin->continuous) {
 			vnmc = VNMC_IM_ODD_EVEN;
@@ -757,18 +756,6 @@ static int rvin_get_active_slot(struct rvin_dev *vin, u32 vnms)
 	return 0;
 }
 
-static enum v4l2_field rvin_get_active_field(struct rvin_dev *vin, u32 vnms)
-{
-	if (vin->format.field == V4L2_FIELD_ALTERNATE) {
-		/* If FS is set it's a Even field */
-		if (vnms & VNMS_FS)
-			return V4L2_FIELD_BOTTOM;
-		return V4L2_FIELD_TOP;
-	}
-
-	return vin->format.field;
-}
-
 static void rvin_set_slot_addr(struct rvin_dev *vin, int slot, dma_addr_t addr)
 {
 	const struct rvin_video_format *fmt;
@@ -941,7 +928,7 @@ static irqreturn_t rvin_irq(int irq, void *data)
 		goto done;
 
 	/* Capture frame */
-	vin->queue_buf[slot]->field = rvin_get_active_field(vin, vnms);
+	vin->queue_buf[slot]->field = vin->format.field;
 	vin->queue_buf[slot]->sequence = sequence;
 	vin->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns();
 	vb2_buffer_done(&vin->queue_buf[slot]->vb2_buf, VB2_BUF_STATE_DONE);
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index ee5df05df2e9561f..b4e96e18ab845f8b 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -102,6 +102,24 @@ static int rvin_get_sd_format(struct rvin_dev *vin, struct v4l2_pix_format *pix)
 	if (ret)
 		return ret;
 
+	switch (fmt.format.field) {
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+	case V4L2_FIELD_NONE:
+	case V4L2_FIELD_INTERLACED_TB:
+	case V4L2_FIELD_INTERLACED_BT:
+	case V4L2_FIELD_INTERLACED:
+		break;
+	case V4L2_FIELD_ALTERNATE:
+		/* Use VIN hardware to combine the two fields */
+		fmt.format.field = V4L2_FIELD_INTERLACED;
+		fmt.format.height *= 2;
+		break;
+	default:
+		vin->format.field = V4L2_FIELD_NONE;
+		break;
+	}
+
 	v4l2_fill_pix_format(pix, &fmt.format);
 
 	return 0;
@@ -115,33 +133,6 @@ int rvin_reset_format(struct rvin_dev *vin)
 	if (ret)
 		return ret;
 
-	/*
-	 * If the subdevice uses ALTERNATE field mode and G_STD is
-	 * implemented use the VIN HW to combine the two fields to
-	 * one INTERLACED frame. The ALTERNATE field mode can still
-	 * be requested in S_FMT and be respected, this is just the
-	 * default which is applied at probing or when S_STD is called.
-	 */
-	if (vin->format.field == V4L2_FIELD_ALTERNATE &&
-	    v4l2_subdev_has_op(vin_to_source(vin), video, g_std))
-		vin->format.field = V4L2_FIELD_INTERLACED;
-
-	switch (vin->format.field) {
-	case V4L2_FIELD_TOP:
-	case V4L2_FIELD_BOTTOM:
-	case V4L2_FIELD_ALTERNATE:
-		vin->format.height /= 2;
-		break;
-	case V4L2_FIELD_NONE:
-	case V4L2_FIELD_INTERLACED_TB:
-	case V4L2_FIELD_INTERLACED_BT:
-	case V4L2_FIELD_INTERLACED:
-		break;
-	default:
-		vin->format.field = V4L2_FIELD_NONE;
-		break;
-	}
-
 	vin->crop.top = vin->crop.left = 0;
 	vin->crop.width = vin->format.width;
 	vin->crop.height = vin->format.height;
@@ -226,9 +217,6 @@ static int __rvin_try_format(struct rvin_dev *vin,
 	switch (pix->field) {
 	case V4L2_FIELD_TOP:
 	case V4L2_FIELD_BOTTOM:
-	case V4L2_FIELD_ALTERNATE:
-		pix->height /= 2;
-		break;
 	case V4L2_FIELD_NONE:
 	case V4L2_FIELD_INTERLACED_TB:
 	case V4L2_FIELD_INTERLACED_BT:
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 12/25] rcar-vin: move media bus configuration to struct rvin_info
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (10 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 11/25] rcar-vin: fix handling of single field frames (top, bottom and alternate fields) Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 13/25] rcar-vin: enable Gen3 hardware configuration Niklas Söderlund
                   ` (12 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

Bus configuration will once the driver is extended to support Gen3
contain information not specific to only the directly connected parallel
subdevice. Move it to struct rvin_info to show it's not always coupled
to the parallel subdevice.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 18 +++++++++---------
 drivers/media/platform/rcar-vin/rcar-dma.c  | 11 ++++++-----
 drivers/media/platform/rcar-vin/rcar-v4l2.c |  2 +-
 drivers/media/platform/rcar-vin/rcar-vin.h  |  9 ++++-----
 4 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index cb761057459caa3f..fa76f494ec0c4bd2 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -100,10 +100,10 @@ static int rvin_digital_notify_bound(struct v4l2_async_notifier *notifier,
 	vin->digital->sink_pad = ret < 0 ? 0 : ret;
 
 	/* Find compatible subdevices mbus format */
-	vin->digital->code = 0;
+	vin->code = 0;
 	code.index = 0;
 	code.pad = vin->digital->source_pad;
-	while (!vin->digital->code &&
+	while (!vin->code &&
 	       !v4l2_subdev_call(subdev, pad, enum_mbus_code, NULL, &code)) {
 		code.index++;
 		switch (code.code) {
@@ -111,16 +111,16 @@ static int rvin_digital_notify_bound(struct v4l2_async_notifier *notifier,
 		case MEDIA_BUS_FMT_UYVY8_2X8:
 		case MEDIA_BUS_FMT_UYVY10_2X10:
 		case MEDIA_BUS_FMT_RGB888_1X24:
-			vin->digital->code = code.code;
+			vin->code = code.code;
 			vin_dbg(vin, "Found media bus format for %s: %d\n",
-				subdev->name, vin->digital->code);
+				subdev->name, vin->code);
 			break;
 		default:
 			break;
 		}
 	}
 
-	if (!vin->digital->code) {
+	if (!vin->code) {
 		vin_err(vin, "Unsupported media bus format for %s\n",
 			subdev->name);
 		return -EINVAL;
@@ -186,16 +186,16 @@ static int rvin_digital_parse_v4l2(struct device *dev,
 	if (vep->base.port || vep->base.id)
 		return -ENOTCONN;
 
-	rvge->mbus_cfg.type = vep->bus_type;
+	vin->mbus_cfg.type = vep->bus_type;
 
-	switch (rvge->mbus_cfg.type) {
+	switch (vin->mbus_cfg.type) {
 	case V4L2_MBUS_PARALLEL:
 		vin_dbg(vin, "Found PARALLEL media bus\n");
-		rvge->mbus_cfg.flags = vep->bus.parallel.flags;
+		vin->mbus_cfg.flags = vep->bus.parallel.flags;
 		break;
 	case V4L2_MBUS_BT656:
 		vin_dbg(vin, "Found BT656 media bus\n");
-		rvge->mbus_cfg.flags = 0;
+		vin->mbus_cfg.flags = 0;
 		break;
 	default:
 		vin_err(vin, "Unknown media bus type\n");
diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 506d51a13b4f5f40..9362e7dba5e3ba95 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -633,7 +633,7 @@ static int rvin_setup(struct rvin_dev *vin)
 	/*
 	 * Input interface
 	 */
-	switch (vin->digital->code) {
+	switch (vin->code) {
 	case MEDIA_BUS_FMT_YUYV8_1X16:
 		/* BT.601/BT.1358 16bit YCbCr422 */
 		vnmc |= VNMC_INF_YUV16;
@@ -641,7 +641,7 @@ static int rvin_setup(struct rvin_dev *vin)
 		break;
 	case MEDIA_BUS_FMT_UYVY8_2X8:
 		/* BT.656 8bit YCbCr422 or BT.601 8bit YCbCr422 */
-		vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
+		vnmc |= vin->mbus_cfg.type == V4L2_MBUS_BT656 ?
 			VNMC_INF_YUV8_BT656 : VNMC_INF_YUV8_BT601;
 		input_is_yuv = true;
 		break;
@@ -650,7 +650,7 @@ static int rvin_setup(struct rvin_dev *vin)
 		break;
 	case MEDIA_BUS_FMT_UYVY10_2X10:
 		/* BT.656 10bit YCbCr422 or BT.601 10bit YCbCr422 */
-		vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
+		vnmc |= vin->mbus_cfg.type == V4L2_MBUS_BT656 ?
 			VNMC_INF_YUV10_BT656 : VNMC_INF_YUV10_BT601;
 		input_is_yuv = true;
 		break;
@@ -662,11 +662,11 @@ static int rvin_setup(struct rvin_dev *vin)
 	dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
 
 	/* Hsync Signal Polarity Select */
-	if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
+	if (!(vin->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
 		dmr2 |= VNDMR2_HPS;
 
 	/* Vsync Signal Polarity Select */
-	if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
+	if (!(vin->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
 		dmr2 |= VNDMR2_VPS;
 
 	/*
@@ -875,6 +875,7 @@ static void rvin_capture_stop(struct rvin_dev *vin)
 	rvin_write(vin, rvin_read(vin, VNMC_REG) & ~VNMC_ME, VNMC_REG);
 }
 
+
 /* -----------------------------------------------------------------------------
  * DMA Functions
  */
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index b4e96e18ab845f8b..f7e04601007edb64 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -161,7 +161,7 @@ static int __rvin_try_format_source(struct rvin_dev *vin,
 
 	sd = vin_to_source(vin);
 
-	v4l2_fill_mbus_format(&format.format, pix, vin->digital->code);
+	v4l2_fill_mbus_format(&format.format, pix, vin->code);
 
 	pad_cfg = v4l2_subdev_alloc_pad_config(sd);
 	if (pad_cfg == NULL)
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index b97391c414d01bb0..4bd9223be1ee6b6a 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -62,8 +62,6 @@ struct rvin_video_format {
  * struct rvin_graph_entity - Video endpoint from async framework
  * @asd:	sub-device descriptor for async framework
  * @subdev:	subdevice matched using async framework
- * @code:	Media bus format from source
- * @mbus_cfg:	Media bus format from DT
  * @source_pad:	source pad of remote subdevice
  * @sink_pad:	sink pad of remote subdevice
  */
@@ -71,9 +69,6 @@ struct rvin_graph_entity {
 	struct v4l2_async_subdev asd;
 	struct v4l2_subdev *subdev;
 
-	u32 code;
-	struct v4l2_mbus_config mbus_cfg;
-
 	unsigned int source_pad;
 	unsigned int sink_pad;
 };
@@ -115,6 +110,8 @@ struct rvin_info {
  * @sequence:		V4L2 buffers sequence number
  * @state:		keeps track of operation state
  *
+ * @mbus_cfg:		media bus format from DT
+ * @code:		media bus coide from subdevice
  * @format:		active V4L2 pixel format
  *
  * @crop:		active cropping
@@ -141,6 +138,8 @@ struct rvin_dev {
 	unsigned int sequence;
 	enum rvin_dma_state state;
 
+	struct v4l2_mbus_config mbus_cfg;
+	u32 code;
 	struct v4l2_pix_format format;
 
 	struct v4l2_rect crop;
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 13/25] rcar-vin: enable Gen3 hardware configuration
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (11 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 12/25] rcar-vin: move media bus configuration to struct rvin_info Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 14/25] rcar-vin: add function to manipulate Gen3 CHSEL value Niklas Söderlund
                   ` (11 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

Add the register needed to work with Gen3 hardware. This patch adds
the logic for how to work with the Gen3 hardware. More work is required
to enable the subdevice structure needed to configure capturing.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-dma.c | 94 ++++++++++++++++++++----------
 drivers/media/platform/rcar-vin/rcar-vin.h |  1 +
 2 files changed, 64 insertions(+), 31 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 9362e7dba5e3ba95..c4f8e81e88c99e28 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -33,21 +33,23 @@
 #define VNELPRC_REG	0x10	/* Video n End Line Pre-Clip Register */
 #define VNSPPRC_REG	0x14	/* Video n Start Pixel Pre-Clip Register */
 #define VNEPPRC_REG	0x18	/* Video n End Pixel Pre-Clip Register */
-#define VNSLPOC_REG	0x1C	/* Video n Start Line Post-Clip Register */
-#define VNELPOC_REG	0x20	/* Video n End Line Post-Clip Register */
-#define VNSPPOC_REG	0x24	/* Video n Start Pixel Post-Clip Register */
-#define VNEPPOC_REG	0x28	/* Video n End Pixel Post-Clip Register */
 #define VNIS_REG	0x2C	/* Video n Image Stride Register */
 #define VNMB_REG(m)	(0x30 + ((m) << 2)) /* Video n Memory Base m Register */
 #define VNIE_REG	0x40	/* Video n Interrupt Enable Register */
 #define VNINTS_REG	0x44	/* Video n Interrupt Status Register */
 #define VNSI_REG	0x48	/* Video n Scanline Interrupt Register */
 #define VNMTC_REG	0x4C	/* Video n Memory Transfer Control Register */
-#define VNYS_REG	0x50	/* Video n Y Scale Register */
-#define VNXS_REG	0x54	/* Video n X Scale Register */
 #define VNDMR_REG	0x58	/* Video n Data Mode Register */
 #define VNDMR2_REG	0x5C	/* Video n Data Mode Register 2 */
 #define VNUVAOF_REG	0x60	/* Video n UV Address Offset Register */
+
+/* Register offsets specific for Gen2 */
+#define VNSLPOC_REG	0x1C	/* Video n Start Line Post-Clip Register */
+#define VNELPOC_REG	0x20	/* Video n End Line Post-Clip Register */
+#define VNSPPOC_REG	0x24	/* Video n Start Pixel Post-Clip Register */
+#define VNEPPOC_REG	0x28	/* Video n End Pixel Post-Clip Register */
+#define VNYS_REG	0x50	/* Video n Y Scale Register */
+#define VNXS_REG	0x54	/* Video n X Scale Register */
 #define VNC1A_REG	0x80	/* Video n Coefficient Set C1A Register */
 #define VNC1B_REG	0x84	/* Video n Coefficient Set C1B Register */
 #define VNC1C_REG	0x88	/* Video n Coefficient Set C1C Register */
@@ -73,9 +75,13 @@
 #define VNC8B_REG	0xF4	/* Video n Coefficient Set C8B Register */
 #define VNC8C_REG	0xF8	/* Video n Coefficient Set C8C Register */
 
+/* Register offsets specific for Gen3 */
+#define VNCSI_IFMD_REG		0x20 /* Video n CSI2 Interface Mode Register */
 
 /* Register bit fields for R-Car VIN */
 /* Video n Main Control Register bits */
+#define VNMC_DPINE		(1 << 27) /* Gen3 specific */
+#define VNMC_SCLE		(1 << 26) /* Gen3 specific */
 #define VNMC_FOC		(1 << 21)
 #define VNMC_YCAL		(1 << 19)
 #define VNMC_INF_YUV8_BT656	(0 << 16)
@@ -119,6 +125,13 @@
 #define VNDMR2_FTEV		(1 << 17)
 #define VNDMR2_VLV(n)		((n & 0xf) << 12)
 
+/* Video n CSI2 Interface Mode Register (Gen3) */
+#define VNCSI_IFMD_DES2		(1 << 27)
+#define VNCSI_IFMD_DES1		(1 << 26)
+#define VNCSI_IFMD_DES0		(1 << 25)
+#define VNCSI_IFMD_CSI_CHSEL(n) ((n & 0xf) << 0)
+#define VNCSI_IFMD_CSI_CHSEL_MASK 0xf
+
 struct rvin_buffer {
 	struct vb2_v4l2_buffer vb;
 	struct list_head list;
@@ -514,28 +527,10 @@ static void rvin_set_coeff(struct rvin_dev *vin, unsigned short xs)
 	rvin_write(vin, p_set->coeff_set[23], VNC8C_REG);
 }
 
-static void rvin_crop_scale_comp(struct rvin_dev *vin)
+static void rvin_crop_scale_comp_gen2(struct rvin_dev *vin)
 {
 	u32 xs, ys;
 
-	/* Set Start/End Pixel/Line Pre-Clip */
-	rvin_write(vin, vin->crop.left, VNSPPRC_REG);
-	rvin_write(vin, vin->crop.left + vin->crop.width - 1, VNEPPRC_REG);
-	switch (vin->format.field) {
-	case V4L2_FIELD_INTERLACED:
-	case V4L2_FIELD_INTERLACED_TB:
-	case V4L2_FIELD_INTERLACED_BT:
-		rvin_write(vin, vin->crop.top / 2, VNSLPRC_REG);
-		rvin_write(vin, (vin->crop.top + vin->crop.height) / 2 - 1,
-			   VNELPRC_REG);
-		break;
-	default:
-		rvin_write(vin, vin->crop.top, VNSLPRC_REG);
-		rvin_write(vin, vin->crop.top + vin->crop.height - 1,
-			   VNELPRC_REG);
-		break;
-	}
-
 	/* Set scaling coefficient */
 	ys = 0;
 	if (vin->crop.height != vin->compose.height)
@@ -573,11 +568,6 @@ static void rvin_crop_scale_comp(struct rvin_dev *vin)
 		break;
 	}
 
-	if (vin->format.pixelformat == V4L2_PIX_FMT_NV16)
-		rvin_write(vin, ALIGN(vin->format.width, 0x20), VNIS_REG);
-	else
-		rvin_write(vin, ALIGN(vin->format.width, 0x10), VNIS_REG);
-
 	vin_dbg(vin,
 		"Pre-Clip: %ux%u@%u:%u YS: %d XS: %d Post-Clip: %ux%u@%u:%u\n",
 		vin->crop.width, vin->crop.height, vin->crop.left,
@@ -585,6 +575,37 @@ static void rvin_crop_scale_comp(struct rvin_dev *vin)
 		0, 0);
 }
 
+static void rvin_crop_scale_comp(struct rvin_dev *vin)
+{
+	/* Set Start/End Pixel/Line Pre-Clip */
+	rvin_write(vin, vin->crop.left, VNSPPRC_REG);
+	rvin_write(vin, vin->crop.left + vin->crop.width - 1, VNEPPRC_REG);
+
+	switch (vin->format.field) {
+	case V4L2_FIELD_INTERLACED:
+	case V4L2_FIELD_INTERLACED_TB:
+	case V4L2_FIELD_INTERLACED_BT:
+		rvin_write(vin, vin->crop.top / 2, VNSLPRC_REG);
+		rvin_write(vin, (vin->crop.top + vin->crop.height) / 2 - 1,
+			   VNELPRC_REG);
+		break;
+	default:
+		rvin_write(vin, vin->crop.top, VNSLPRC_REG);
+		rvin_write(vin, vin->crop.top + vin->crop.height - 1,
+			   VNELPRC_REG);
+		break;
+	}
+
+	/* TODO: Add support for the UDS scaler. */
+	if (vin->info->chip != RCAR_GEN3)
+		rvin_crop_scale_comp_gen2(vin);
+
+	if (vin->format.pixelformat == V4L2_PIX_FMT_NV16)
+		rvin_write(vin, ALIGN(vin->format.width, 0x20), VNIS_REG);
+	else
+		rvin_write(vin, ALIGN(vin->format.width, 0x10), VNIS_REG);
+}
+
 /* -----------------------------------------------------------------------------
  * Hardware setup
  */
@@ -659,7 +680,10 @@ static int rvin_setup(struct rvin_dev *vin)
 	}
 
 	/* Enable VSYNC Field Toogle mode after one VSYNC input */
-	dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
+	if (vin->info->chip == RCAR_GEN3)
+		dmr2 = VNDMR2_FTEV;
+	else
+		dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
 
 	/* Hsync Signal Polarity Select */
 	if (!(vin->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
@@ -711,6 +735,14 @@ static int rvin_setup(struct rvin_dev *vin)
 	if (input_is_yuv == output_is_yuv)
 		vnmc |= VNMC_BPS;
 
+	if (vin->info->chip == RCAR_GEN3) {
+		/* Select between CSI-2 and Digital input */
+		if (vin->mbus_cfg.type == V4L2_MBUS_CSI2)
+			vnmc &= ~VNMC_DPINE;
+		else
+			vnmc |= VNMC_DPINE;
+	}
+
 	/* Progressive or interlaced mode */
 	interrupts = progressive ? VNIE_FIE : VNIE_EFE;
 
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 4bd9223be1ee6b6a..1f761518a6cc60b8 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -33,6 +33,7 @@ enum chip_id {
 	RCAR_H1,
 	RCAR_M1,
 	RCAR_GEN2,
+	RCAR_GEN3,
 };
 
 /**
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 14/25] rcar-vin: add function to manipulate Gen3 CHSEL value
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (12 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 13/25] rcar-vin: enable Gen3 hardware configuration Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-17 11:22   ` Hans Verkuil
  2017-11-11  0:38 ` [PATCH v7 15/25] rcar-vin: add flag to switch to media controller mode Niklas Söderlund
                   ` (10 subsequent siblings)
  24 siblings, 1 reply; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

On Gen3 the CSI-2 routing is controlled by the VnCSI_IFMD register. One
feature of this register is that it's only present in the VIN0 and VIN4
instances. The register in VIN0 controls the routing for VIN0-3 and the
register in VIN4 controls routing for VIN4-7.

To be able to control routing from a media device this function is need
to control runtime PM for the subgroup master (VIN0 and VIN4). The
subgroup master must be switched on before the register is manipulated,
once the operation is complete it's safe to switch the master off and
the new routing will still be in effect.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/media/platform/rcar-vin/rcar-dma.c | 25 +++++++++++++++++++++++++
 drivers/media/platform/rcar-vin/rcar-vin.h |  2 ++
 2 files changed, 27 insertions(+)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index c4f8e81e88c99e28..463c656b9878be52 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -16,6 +16,7 @@
 
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
 
 #include <media/videobuf2-dma-contig.h>
 
@@ -1228,3 +1229,27 @@ int rvin_dma_probe(struct rvin_dev *vin, int irq)
 
 	return ret;
 }
+
+/* -----------------------------------------------------------------------------
+ * Gen3 CHSEL manipulation
+ */
+
+void rvin_set_chsel(struct rvin_dev *vin, u8 chsel)
+{
+	u32 ifmd, vnmc;
+
+	pm_runtime_get_sync(vin->dev);
+
+	/* Make register writes take effect immediately */
+	vnmc = rvin_read(vin, VNMC_REG) & ~VNMC_VUP;
+	rvin_write(vin, vnmc, VNMC_REG);
+
+	ifmd = VNCSI_IFMD_DES2 | VNCSI_IFMD_DES1 | VNCSI_IFMD_DES0 |
+		VNCSI_IFMD_CSI_CHSEL(chsel);
+
+	rvin_write(vin, ifmd, VNCSI_IFMD_REG);
+
+	vin_dbg(vin, "Set IFMD 0x%x\n", ifmd);
+
+	pm_runtime_put(vin->dev);
+}
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 1f761518a6cc60b8..8a7c51724a90786c 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -164,4 +164,6 @@ int rvin_reset_format(struct rvin_dev *vin);
 
 const struct rvin_video_format *rvin_format_from_pixel(u32 pixelformat);
 
+void rvin_set_chsel(struct rvin_dev *vin, u8 chsel);
+
 #endif
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 15/25] rcar-vin: add flag to switch to media controller mode
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (13 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 14/25] rcar-vin: add function to manipulate Gen3 CHSEL value Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 16/25] rcar-vin: break out format alignment and checking Niklas Söderlund
                   ` (9 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

On Gen3 a media controller API needs to be used to allow userspace to
configure the subdevices in the pipeline instead of directly controlling
a single source subdevice, which is and will continue to be the mode of
operation on Gen2.

Prepare for these two modes of operation by adding a flag to struct
rvin_info which will control which mode to use.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 6 +++++-
 drivers/media/platform/rcar-vin/rcar-vin.h  | 2 ++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index fa76f494ec0c4bd2..071116eec284ba5f 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -244,18 +244,21 @@ static int rvin_digital_graph_init(struct rvin_dev *vin)
 
 static const struct rvin_info rcar_info_h1 = {
 	.chip = RCAR_H1,
+	.use_mc = false,
 	.max_width = 2048,
 	.max_height = 2048,
 };
 
 static const struct rvin_info rcar_info_m1 = {
 	.chip = RCAR_M1,
+	.use_mc = false,
 	.max_width = 2048,
 	.max_height = 2048,
 };
 
 static const struct rvin_info rcar_info_gen2 = {
 	.chip = RCAR_GEN2,
+	.use_mc = false,
 	.max_width = 2048,
 	.max_height = 2048,
 };
@@ -349,7 +352,8 @@ static int rcar_vin_remove(struct platform_device *pdev)
 	v4l2_async_notifier_cleanup(&vin->notifier);
 
 	/* Checks internaly if handlers have been init or not */
-	v4l2_ctrl_handler_free(&vin->ctrl_handler);
+	if (!vin->info->use_mc)
+		v4l2_ctrl_handler_free(&vin->ctrl_handler);
 
 	rvin_v4l2_unregister(vin);
 
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 8a7c51724a90786c..de269764b00a2fa1 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -77,12 +77,14 @@ struct rvin_graph_entity {
 /**
  * struct rvin_info - Information about the particular VIN implementation
  * @chip:		type of VIN chip
+ * @use_mc:		use media controller instead of controlling subdevice
  *
  * max_width:		max input width the VIN supports
  * max_height:		max input height the VIN supports
  */
 struct rvin_info {
 	enum chip_id chip;
+	bool use_mc;
 
 	unsigned int max_width;
 	unsigned int max_height;
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 16/25] rcar-vin: break out format alignment and checking
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (14 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 15/25] rcar-vin: add flag to switch to media controller mode Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 17/25] rcar-vin: use different v4l2 operations in media controller mode Niklas Söderlund
                   ` (8 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

Part of the format alignment and checking can be shared with the Gen3
format handling. Break that part out to its own function. While doing
this clean up the checking and add more checks.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 98 +++++++++++++++--------------
 1 file changed, 51 insertions(+), 47 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index f7e04601007edb64..c9a3fe21dea4ce5d 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -86,6 +86,56 @@ static u32 rvin_format_sizeimage(struct v4l2_pix_format *pix)
 	return pix->bytesperline * pix->height;
 }
 
+static int rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format *pix)
+{
+	u32 walign;
+
+	/* If requested format is not supported fallback to the default */
+	if (!rvin_format_from_pixel(pix->pixelformat)) {
+		vin_dbg(vin, "Format 0x%x not found, using default 0x%x\n",
+			pix->pixelformat, RVIN_DEFAULT_FORMAT);
+		pix->pixelformat = RVIN_DEFAULT_FORMAT;
+	}
+
+	switch (pix->field) {
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+	case V4L2_FIELD_NONE:
+	case V4L2_FIELD_INTERLACED_TB:
+	case V4L2_FIELD_INTERLACED_BT:
+	case V4L2_FIELD_INTERLACED:
+		break;
+	default:
+		pix->field = V4L2_FIELD_NONE;
+		break;
+	}
+
+	/* Check that colorspace is reasonable, if not keep current */
+	if (!pix->colorspace || pix->colorspace >= 0xff)
+		pix->colorspace = vin->format.colorspace;
+
+	/* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
+	walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
+
+	/* Limit to VIN capabilities */
+	v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
+			      &pix->height, 4, vin->info->max_height, 2, 0);
+
+	pix->bytesperline = rvin_format_bytesperline(pix);
+	pix->sizeimage = rvin_format_sizeimage(pix);
+
+	if (vin->info->chip == RCAR_M1 &&
+	    pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
+		vin_err(vin, "pixel format XBGR32 not supported on M1\n");
+		return -EINVAL;
+	}
+
+	vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
+		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
+
+	return 0;
+}
+
 /* -----------------------------------------------------------------------------
  * V4L2
  */
@@ -191,64 +241,18 @@ static int __rvin_try_format_source(struct rvin_dev *vin,
 static int __rvin_try_format(struct rvin_dev *vin,
 			     u32 which, struct v4l2_pix_format *pix)
 {
-	u32 walign;
 	int ret;
 
 	/* Keep current field if no specific one is asked for */
 	if (pix->field == V4L2_FIELD_ANY)
 		pix->field = vin->format.field;
 
-	/* If requested format is not supported fallback to the default */
-	if (!rvin_format_from_pixel(pix->pixelformat)) {
-		vin_dbg(vin, "Format 0x%x not found, using default 0x%x\n",
-			pix->pixelformat, RVIN_DEFAULT_FORMAT);
-		pix->pixelformat = RVIN_DEFAULT_FORMAT;
-	}
-
-	/* Always recalculate */
-	pix->bytesperline = 0;
-	pix->sizeimage = 0;
-
 	/* Limit to source capabilities */
 	ret = __rvin_try_format_source(vin, which, pix);
 	if (ret)
 		return ret;
 
-	switch (pix->field) {
-	case V4L2_FIELD_TOP:
-	case V4L2_FIELD_BOTTOM:
-	case V4L2_FIELD_NONE:
-	case V4L2_FIELD_INTERLACED_TB:
-	case V4L2_FIELD_INTERLACED_BT:
-	case V4L2_FIELD_INTERLACED:
-		break;
-	default:
-		pix->field = V4L2_FIELD_NONE;
-		break;
-	}
-
-	/* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
-	walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
-
-	/* Limit to VIN capabilities */
-	v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
-			      &pix->height, 4, vin->info->max_height, 2, 0);
-
-	pix->bytesperline = max_t(u32, pix->bytesperline,
-				  rvin_format_bytesperline(pix));
-	pix->sizeimage = max_t(u32, pix->sizeimage,
-			       rvin_format_sizeimage(pix));
-
-	if (vin->info->chip == RCAR_M1 &&
-	    pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
-		vin_err(vin, "pixel format XBGR32 not supported on M1\n");
-		return -EINVAL;
-	}
-
-	vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
-		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
-
-	return 0;
+	return rvin_format_align(vin, pix);
 }
 
 static int rvin_querycap(struct file *file, void *priv,
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 17/25] rcar-vin: use different v4l2 operations in media controller mode
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (15 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 16/25] rcar-vin: break out format alignment and checking Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 18/25] rcar-vin: prepare for media controller mode initialization Niklas Söderlund
                   ` (7 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

When the driver runs in media controller mode it should not directly
control the subdevice instead userspace will be responsible for
configuring the pipeline. To be able to run in this mode a different set
of v4l2 operations needs to be used.

Add a new set of v4l2 operations to support the running without directly
interacting with the source subdevice.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-dma.c  |   3 +-
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 153 +++++++++++++++++++++++++++-
 drivers/media/platform/rcar-vin/rcar-vin.h  |   1 +
 3 files changed, 154 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 463c656b9878be52..fe1319eb4c5df02d 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -628,7 +628,8 @@ static int rvin_setup(struct rvin_dev *vin)
 		/* Default to TB */
 		vnmc = VNMC_IM_FULL;
 		/* Use BT if video standard can be read and is 60 Hz format */
-		if (!v4l2_subdev_call(vin_to_source(vin), video, g_std, &std)) {
+		if (!vin->info->use_mc &&
+		    !v4l2_subdev_call(vin_to_source(vin), video, g_std, &std)) {
 			if (std & V4L2_STD_525_60)
 				vnmc = VNMC_IM_FULL | VNMC_FOC;
 		}
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index c9a3fe21dea4ce5d..11064dd7dcbb53c7 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -23,6 +23,9 @@
 #include "rcar-vin.h"
 
 #define RVIN_DEFAULT_FORMAT	V4L2_PIX_FMT_YUYV
+#define RVIN_DEFAULT_WIDTH	800
+#define RVIN_DEFAULT_HEIGHT	600
+#define RVIN_DEFAULT_COLORSPACE	V4L2_COLORSPACE_SRGB
 
 /* -----------------------------------------------------------------------------
  * Format Conversions
@@ -671,6 +674,84 @@ static const struct v4l2_ioctl_ops rvin_ioctl_ops = {
 	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
 };
 
+/* -----------------------------------------------------------------------------
+ * V4L2 Media Controller
+ */
+
+static int __rvin_mc_try_format(struct rvin_dev *vin,
+				struct v4l2_pix_format *pix)
+{
+	/* Keep current field if no specific one is asked for */
+	if (pix->field == V4L2_FIELD_ANY)
+		pix->field = vin->format.field;
+
+	return rvin_format_align(vin, pix);
+}
+
+static int rvin_mc_try_fmt_vid_cap(struct file *file, void *priv,
+				   struct v4l2_format *f)
+{
+	struct rvin_dev *vin = video_drvdata(file);
+
+	return __rvin_mc_try_format(vin, &f->fmt.pix);
+}
+
+static int rvin_mc_s_fmt_vid_cap(struct file *file, void *priv,
+				 struct v4l2_format *f)
+{
+	struct rvin_dev *vin = video_drvdata(file);
+	int ret;
+
+	if (vb2_is_busy(&vin->queue))
+		return -EBUSY;
+
+	ret = __rvin_mc_try_format(vin, &f->fmt.pix);
+	if (ret)
+		return ret;
+
+	vin->format = f->fmt.pix;
+
+	return 0;
+}
+
+static int rvin_mc_enum_input(struct file *file, void *priv,
+			      struct v4l2_input *i)
+{
+	if (i->index != 0)
+		return -EINVAL;
+
+	i->type = V4L2_INPUT_TYPE_CAMERA;
+	strlcpy(i->name, "Camera", sizeof(i->name));
+
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops rvin_mc_ioctl_ops = {
+	.vidioc_querycap		= rvin_querycap,
+	.vidioc_try_fmt_vid_cap		= rvin_mc_try_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap		= rvin_g_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap		= rvin_mc_s_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap	= rvin_enum_fmt_vid_cap,
+
+	.vidioc_enum_input		= rvin_mc_enum_input,
+	.vidioc_g_input			= rvin_g_input,
+	.vidioc_s_input			= rvin_s_input,
+
+	.vidioc_reqbufs			= vb2_ioctl_reqbufs,
+	.vidioc_create_bufs		= vb2_ioctl_create_bufs,
+	.vidioc_querybuf		= vb2_ioctl_querybuf,
+	.vidioc_qbuf			= vb2_ioctl_qbuf,
+	.vidioc_dqbuf			= vb2_ioctl_dqbuf,
+	.vidioc_expbuf			= vb2_ioctl_expbuf,
+	.vidioc_prepare_buf		= vb2_ioctl_prepare_buf,
+	.vidioc_streamon		= vb2_ioctl_streamon,
+	.vidioc_streamoff		= vb2_ioctl_streamoff,
+
+	.vidioc_log_status		= v4l2_ctrl_log_status,
+	.vidioc_subscribe_event		= rvin_subscribe_event,
+	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
+};
+
 /* -----------------------------------------------------------------------------
  * File Operations
  */
@@ -819,6 +900,60 @@ static const struct v4l2_file_operations rvin_fops = {
 	.read		= vb2_fop_read,
 };
 
+/* -----------------------------------------------------------------------------
+ * Media controller file Operations
+ */
+
+static int rvin_mc_open(struct file *file)
+{
+	struct rvin_dev *vin = video_drvdata(file);
+	int ret;
+
+	mutex_lock(&vin->lock);
+
+	file->private_data = vin;
+
+	ret = v4l2_fh_open(file);
+	if (ret)
+		goto unlock;
+
+	pm_runtime_get_sync(vin->dev);
+	v4l2_pipeline_pm_use(&vin->vdev.entity, 1);
+
+unlock:
+	mutex_unlock(&vin->lock);
+
+	return ret;
+}
+
+static int rvin_mc_release(struct file *file)
+{
+	struct rvin_dev *vin = video_drvdata(file);
+	int ret;
+
+	mutex_lock(&vin->lock);
+
+	/* the release helper will cleanup any on-going streaming */
+	ret = _vb2_fop_release(file, NULL);
+
+	v4l2_pipeline_pm_use(&vin->vdev.entity, 0);
+	pm_runtime_put(vin->dev);
+
+	mutex_unlock(&vin->lock);
+
+	return ret;
+}
+
+static const struct v4l2_file_operations rvin_mc_fops = {
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= video_ioctl2,
+	.open		= rvin_mc_open,
+	.release	= rvin_mc_release,
+	.poll		= vb2_fop_poll,
+	.mmap		= vb2_fop_mmap,
+	.read		= vb2_fop_read,
+};
+
 void rvin_v4l2_unregister(struct rvin_dev *vin)
 {
 	v4l2_info(&vin->v4l2_dev, "Removing %s\n",
@@ -851,18 +986,32 @@ int rvin_v4l2_register(struct rvin_dev *vin)
 	vin->v4l2_dev.notify = rvin_notify;
 
 	/* video node */
-	vdev->fops = &rvin_fops;
 	vdev->v4l2_dev = &vin->v4l2_dev;
 	vdev->queue = &vin->queue;
 	snprintf(vdev->name, sizeof(vdev->name), "%s %s", KBUILD_MODNAME,
 		 dev_name(vin->dev));
 	vdev->release = video_device_release_empty;
-	vdev->ioctl_ops = &rvin_ioctl_ops;
 	vdev->lock = &vin->lock;
 	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
 		V4L2_CAP_READWRITE;
 
+	/* Set some form of default format */
 	vin->format.pixelformat	= RVIN_DEFAULT_FORMAT;
+	vin->format.width = RVIN_DEFAULT_WIDTH;
+	vin->format.height = RVIN_DEFAULT_HEIGHT;
+	vin->format.colorspace = RVIN_DEFAULT_COLORSPACE;
+
+	ret = rvin_format_align(vin, &vin->format);
+	if (ret)
+		return ret;
+
+	if (vin->info->use_mc) {
+		vdev->fops = &rvin_mc_fops;
+		vdev->ioctl_ops = &rvin_mc_ioctl_ops;
+	} else {
+		vdev->fops = &rvin_fops;
+		vdev->ioctl_ops = &rvin_ioctl_ops;
+	}
 
 	ret = video_register_device(&vin->vdev, VFL_TYPE_GRABBER, -1);
 	if (ret) {
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index de269764b00a2fa1..2789887efe2f3251 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -21,6 +21,7 @@
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-dev.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-mc.h>
 #include <media/videobuf2-v4l2.h>
 
 /* Number of HW buffers */
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 18/25] rcar-vin: prepare for media controller mode initialization
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (16 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 17/25] rcar-vin: use different v4l2 operations in media controller mode Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 19/25] rcar-vin: add group allocator functions Niklas Söderlund
                   ` (6 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

When running in media controller mode a media pad is needed, register
one. Also set the media bus format to CSI-2.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 24 ++++++++++++++++++++++--
 drivers/media/platform/rcar-vin/rcar-vin.h  |  4 ++++
 2 files changed, 26 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 071116eec284ba5f..1b3572c8b6691a07 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -46,6 +46,10 @@ static int rvin_find_pad(struct v4l2_subdev *sd, int direction)
 	return -EINVAL;
 }
 
+/* -----------------------------------------------------------------------------
+ * Digital async notifier
+ */
+
 static int rvin_digital_notify_complete(struct v4l2_async_notifier *notifier)
 {
 	struct rvin_dev *vin = notifier_to_vin(notifier);
@@ -238,6 +242,20 @@ static int rvin_digital_graph_init(struct rvin_dev *vin)
 	return 0;
 }
 
+/* -----------------------------------------------------------------------------
+ * Group async notifier
+ */
+
+static int rvin_group_init(struct rvin_dev *vin)
+{
+	/* All our sources are CSI-2 */
+	vin->mbus_cfg.type = V4L2_MBUS_CSI2;
+	vin->mbus_cfg.flags = 0;
+
+	vin->pad.flags = MEDIA_PAD_FL_SINK;
+	return media_entity_pads_init(&vin->vdev.entity, 1, &vin->pad);
+}
+
 /* -----------------------------------------------------------------------------
  * Platform Device Driver
  */
@@ -326,8 +344,10 @@ static int rcar_vin_probe(struct platform_device *pdev)
 		return ret;
 
 	platform_set_drvdata(pdev, vin);
-
-	ret = rvin_digital_graph_init(vin);
+	if (vin->info->use_mc)
+		ret = rvin_group_init(vin);
+	else
+		ret = rvin_digital_graph_init(vin);
 	if (ret < 0)
 		goto error;
 
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 2789887efe2f3251..2d92b9dd0aed6cc9 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -103,6 +103,8 @@ struct rvin_info {
  * @notifier:		V4L2 asynchronous subdevs notifier
  * @digital:		entity in the DT for local digital subdevice
  *
+ * @pad:		pad for media controller
+ *
  * @lock:		protects @queue
  * @queue:		vb2 buffers queue
  *
@@ -132,6 +134,8 @@ struct rvin_dev {
 	struct v4l2_async_notifier notifier;
 	struct rvin_graph_entity *digital;
 
+	struct media_pad pad;
+
 	struct mutex lock;
 	struct vb2_queue queue;
 
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 19/25] rcar-vin: add group allocator functions
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (17 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 18/25] rcar-vin: prepare for media controller mode initialization Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 20/25] rcar-vin: add chsel information to rvin_info Niklas Söderlund
                   ` (5 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

In media controller mode all VIN instances needs to be part of the same
media graph. There is also a need to each VIN instance to know and in
some cases be able to communicate with other VIN instances.

Add an allocator framework where the first VIN instance to be probed
creates a shared data structure and creates a media device.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 179 +++++++++++++++++++++++++++-
 drivers/media/platform/rcar-vin/rcar-vin.h  |  38 ++++++
 2 files changed, 216 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 1b3572c8b6691a07..e204eb3db77c1d2b 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -20,12 +20,171 @@
 #include <linux/of_graph.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/slab.h>
 
 #include <media/v4l2-async.h>
 #include <media/v4l2-fwnode.h>
 
 #include "rcar-vin.h"
 
+/* -----------------------------------------------------------------------------
+ * Gen3 CSI2 Group Allocator
+ */
+
+static int rvin_group_read_id(struct rvin_dev *vin, struct device_node *np)
+{
+	u32 val;
+	int ret;
+
+	ret = of_property_read_u32(np, "renesas,id", &val);
+	if (ret) {
+		vin_err(vin, "%s: No renesas,id property found\n",
+			of_node_full_name(np));
+		return -EINVAL;
+	}
+
+	if (val >= RCAR_VIN_NUM) {
+		vin_err(vin, "%s: Invalid renesas,id '%u'\n",
+			of_node_full_name(np), val);
+		return -EINVAL;
+	}
+
+	return val;
+}
+
+static DEFINE_MUTEX(rvin_group_lock);
+static struct rvin_group *rvin_group_data;
+
+static void rvin_group_release(struct kref *kref)
+{
+	struct rvin_group *group =
+		container_of(kref, struct rvin_group, refcount);
+
+	mutex_lock(&rvin_group_lock);
+
+	media_device_unregister(&group->mdev);
+	media_device_cleanup(&group->mdev);
+
+	rvin_group_data = NULL;
+
+	mutex_unlock(&rvin_group_lock);
+
+	kfree(group);
+}
+
+static struct rvin_group *__rvin_group_allocate(struct rvin_dev *vin)
+{
+	struct rvin_group *group;
+
+	if (rvin_group_data) {
+		group = rvin_group_data;
+		kref_get(&group->refcount);
+		vin_dbg(vin, "%s: get group=%p\n", __func__, group);
+		return group;
+	}
+
+	group = kzalloc(sizeof(*group), GFP_KERNEL);
+	if (!group)
+		return NULL;
+
+	kref_init(&group->refcount);
+	rvin_group_data = group;
+
+	vin_dbg(vin, "%s: alloc group=%p\n", __func__, group);
+	return group;
+}
+
+static int rvin_group_add_vin(struct rvin_dev *vin)
+{
+	int ret;
+
+	ret = rvin_group_read_id(vin, vin->dev->of_node);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&vin->group->lock);
+
+	if (vin->group->vin[ret]) {
+		mutex_unlock(&vin->group->lock);
+		vin_err(vin, "VIN number %d already occupied\n", ret);
+		return -EINVAL;
+	}
+
+	vin->group->vin[ret] = vin;
+
+	mutex_unlock(&vin->group->lock);
+
+	vin_dbg(vin, "I'm VIN number %d", ret);
+
+	return 0;
+}
+
+static int rvin_group_allocate(struct rvin_dev *vin)
+{
+	struct rvin_group *group;
+	struct media_device *mdev;
+	int ret;
+
+	mutex_lock(&rvin_group_lock);
+
+	group = __rvin_group_allocate(vin);
+	if (!group) {
+		mutex_unlock(&rvin_group_lock);
+		return -ENOMEM;
+	}
+
+	/* Init group data if it is not already initialized */
+	mdev = &group->mdev;
+	if (!mdev->dev) {
+		mutex_init(&group->lock);
+		mdev->dev = vin->dev;
+
+		strlcpy(mdev->driver_name, "Renesas VIN",
+			sizeof(mdev->driver_name));
+		strlcpy(mdev->model, vin->dev->of_node->name,
+			sizeof(mdev->model));
+		strlcpy(mdev->bus_info, of_node_full_name(vin->dev->of_node),
+			sizeof(mdev->bus_info));
+		media_device_init(mdev);
+
+		ret = media_device_register(mdev);
+		if (ret) {
+			vin_err(vin, "Failed to register media device\n");
+			kref_put(&group->refcount, rvin_group_release);
+			mutex_unlock(&rvin_group_lock);
+			return ret;
+		}
+	}
+
+	vin->group = group;
+	vin->v4l2_dev.mdev = mdev;
+
+	ret = rvin_group_add_vin(vin);
+	if (ret) {
+		kref_put(&group->refcount, rvin_group_release);
+		mutex_unlock(&rvin_group_lock);
+		return ret;
+	}
+
+	mutex_unlock(&rvin_group_lock);
+
+	return 0;
+}
+
+static void rvin_group_delete(struct rvin_dev *vin)
+{
+	unsigned int i;
+
+	mutex_lock(&vin->group->lock);
+	for (i = 0; i < RCAR_VIN_NUM; i++)
+		if (vin->group->vin[i] == vin)
+			vin->group->vin[i] = NULL;
+	mutex_unlock(&vin->group->lock);
+
+	vin_dbg(vin, "%s: group=%p\n", __func__, &vin->group);
+	kref_put(&vin->group->refcount, rvin_group_release);
+}
+
 /* -----------------------------------------------------------------------------
  * Async notifier
  */
@@ -248,12 +407,27 @@ static int rvin_digital_graph_init(struct rvin_dev *vin)
 
 static int rvin_group_init(struct rvin_dev *vin)
 {
+	int ret;
+
+	ret = rvin_group_allocate(vin);
+	if (ret)
+		return ret;
+
 	/* All our sources are CSI-2 */
 	vin->mbus_cfg.type = V4L2_MBUS_CSI2;
 	vin->mbus_cfg.flags = 0;
 
 	vin->pad.flags = MEDIA_PAD_FL_SINK;
-	return media_entity_pads_init(&vin->vdev.entity, 1, &vin->pad);
+	ret = media_entity_pads_init(&vin->vdev.entity, 1, &vin->pad);
+	if (ret)
+		goto error_group;
+
+	return 0;
+
+error_group:
+	rvin_group_delete(vin);
+
+	return ret;
 }
 
 /* -----------------------------------------------------------------------------
@@ -377,6 +551,9 @@ static int rcar_vin_remove(struct platform_device *pdev)
 
 	rvin_v4l2_unregister(vin);
 
+	if (vin->info->use_mc)
+		rvin_group_delete(vin);
+
 	rvin_dma_remove(vin);
 
 	return 0;
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 2d92b9dd0aed6cc9..a9bd570d6635fd47 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -17,6 +17,8 @@
 #ifndef __RCAR_VIN__
 #define __RCAR_VIN__
 
+#include <linux/kref.h>
+
 #include <media/v4l2-async.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-dev.h>
@@ -30,6 +32,9 @@
 /* Address alignment mask for HW buffers */
 #define HW_BUFFER_MASK 0x7f
 
+/* Max number on VIN instances that can be in a system */
+#define RCAR_VIN_NUM 8
+
 enum chip_id {
 	RCAR_H1,
 	RCAR_M1,
@@ -37,6 +42,15 @@ enum chip_id {
 	RCAR_GEN3,
 };
 
+enum rvin_csi_id {
+	RVIN_CSI20,
+	RVIN_CSI21,
+	RVIN_CSI40,
+	RVIN_CSI41,
+	RVIN_CSI_MAX,
+	RVIN_NC, /* Not Connected */
+};
+
 /**
  * STOPPED  - No operation in progress
  * RUNNING  - Operation in progress have buffers
@@ -75,6 +89,8 @@ struct rvin_graph_entity {
 	unsigned int sink_pad;
 };
 
+struct rvin_group;
+
 /**
  * struct rvin_info - Information about the particular VIN implementation
  * @chip:		type of VIN chip
@@ -103,6 +119,7 @@ struct rvin_info {
  * @notifier:		V4L2 asynchronous subdevs notifier
  * @digital:		entity in the DT for local digital subdevice
  *
+ * @group:		Gen3 CSI group
  * @pad:		pad for media controller
  *
  * @lock:		protects @queue
@@ -134,6 +151,7 @@ struct rvin_dev {
 	struct v4l2_async_notifier notifier;
 	struct rvin_graph_entity *digital;
 
+	struct rvin_group *group;
 	struct media_pad pad;
 
 	struct mutex lock;
@@ -162,6 +180,26 @@ struct rvin_dev {
 #define vin_warn(d, fmt, arg...)	dev_warn(d->dev, fmt, ##arg)
 #define vin_err(d, fmt, arg...)		dev_err(d->dev, fmt, ##arg)
 
+/**
+ * struct rvin_group - VIN CSI2 group information
+ * @refcount:		number of VIN instances using the group
+ *
+ * @mdev:		media device which represents the group
+ *
+ * @lock:		protects the vin and csi members
+ * @vin:		VIN instances which are part of the group
+ * @csi:		CSI-2 entities that are part of the group
+ */
+struct rvin_group {
+	struct kref refcount;
+
+	struct media_device mdev;
+
+	struct mutex lock;
+	struct rvin_dev *vin[RCAR_VIN_NUM];
+	struct rvin_graph_entity csi[RVIN_CSI_MAX];
+};
+
 int rvin_dma_probe(struct rvin_dev *vin, int irq);
 void rvin_dma_remove(struct rvin_dev *vin);
 
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 20/25] rcar-vin: add chsel information to rvin_info
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (18 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 19/25] rcar-vin: add group allocator functions Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-17 11:25   ` Hans Verkuil
  2017-11-11  0:38 ` [PATCH v7 21/25] rcar-vin: parse Gen3 OF and setup media graph Niklas Söderlund
                   ` (4 subsequent siblings)
  24 siblings, 1 reply; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

Each Gen3 SoC has a limited set of predefined routing possibilities for
which CSI-2 device and virtual channel can be routed to which VIN
instance. Prepare to store this information in the struct rvin_info.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/media/platform/rcar-vin/rcar-vin.h | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index a9bd570d6635fd47..41c81b8d9fb8e851 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -35,6 +35,9 @@
 /* Max number on VIN instances that can be in a system */
 #define RCAR_VIN_NUM 8
 
+/* Max number of CHSEL values for any Gen3 SoC */
+#define RCAR_CHSEL_MAX 6
+
 enum chip_id {
 	RCAR_H1,
 	RCAR_M1,
@@ -91,6 +94,22 @@ struct rvin_graph_entity {
 
 struct rvin_group;
 
+/** struct rvin_group_chsel - Map a CSI-2 receiver and channel to a CHSEL value
+ * @csi:		VIN internal number for CSI-2 device
+ * @chan:		Output channel of the CSI-2 receiver. Each R-Car CSI-2
+ *			receiver has four output channels facing the VIN
+ *			devices, each channel can carry one CSI-2 Virtual
+ *			Channel (VC) and there are no correlation between
+ *			output channel number and CSI-2 VC. It's up to the
+ *			CSI-2 receiver driver to configure which VC is
+ *			outputted on which channel, the VIN devices only
+ *			cares about output channels.
+ */
+struct rvin_group_chsel {
+	enum rvin_csi_id csi;
+	unsigned int chan;
+};
+
 /**
  * struct rvin_info - Information about the particular VIN implementation
  * @chip:		type of VIN chip
@@ -98,6 +117,9 @@ struct rvin_group;
  *
  * max_width:		max input width the VIN supports
  * max_height:		max input height the VIN supports
+ *
+ * num_chsels:		number of possible chsel values for this VIN
+ * chsels:		routing table VIN <-> CSI-2 for the chsel values
  */
 struct rvin_info {
 	enum chip_id chip;
@@ -105,6 +127,9 @@ struct rvin_info {
 
 	unsigned int max_width;
 	unsigned int max_height;
+
+	unsigned int num_chsels;
+	struct rvin_group_chsel chsels[RCAR_VIN_NUM][RCAR_CHSEL_MAX];
 };
 
 /**
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 21/25] rcar-vin: parse Gen3 OF and setup media graph
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (19 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 20/25] rcar-vin: add chsel information to rvin_info Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 22/25] rcar-vin: add link notify for Gen3 Niklas Söderlund
                   ` (3 subsequent siblings)
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

Parse the VIN Gen3 OF graph and register all CSI-2 devices in the VIN
group common media device. Once all CSI-2 subdevices are added to the
common media device create links between them.

The parsing and registering CSI-2 subdevices with the v4l2 async
framework is a collaborative effort shared between the VIN instances
which are part of the group. The first rcar-vin instance parses OF and
finds all other VIN and CSI-2 nodes which are part of the graph. It
stores a bit mask of all VIN instances found and handles to all CSI-2
nodes.

The bit mask is used to figure out when all VIN instances have been
probed. Once the last VIN instance is probed this is detected and this
instance registers all CSI-2 subdevices in its private async notifier.
Once the .complete() callback of this notifier is called it creates the
media controller links between all entities in the graph.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 297 +++++++++++++++++++++++++++-
 drivers/media/platform/rcar-vin/rcar-vin.h  |   7 +-
 2 files changed, 302 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index e204eb3db77c1d2b..78a9766eb7114959 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -405,10 +405,269 @@ static int rvin_digital_graph_init(struct rvin_dev *vin)
  * Group async notifier
  */
 
-static int rvin_group_init(struct rvin_dev *vin)
+/* group lock should be held when calling this function */
+static int rvin_group_add_link(struct rvin_dev *vin,
+			       struct media_entity *source,
+			       unsigned int source_idx,
+			       struct media_entity *sink,
+			       unsigned int sink_idx,
+			       u32 flags)
+{
+	struct media_pad *source_pad, *sink_pad;
+	int ret = 0;
+
+	source_pad = &source->pads[source_idx];
+	sink_pad = &sink->pads[sink_idx];
+
+	if (!media_entity_find_link(source_pad, sink_pad))
+		ret = media_create_pad_link(source, source_idx,
+					    sink, sink_idx, flags);
+
+	if (ret)
+		vin_err(vin, "Error adding link from %s to %s\n",
+			source->name, sink->name);
+
+	return ret;
+}
+
+static int rvin_group_update_links(struct rvin_dev *vin)
+{
+	struct media_entity *source, *sink;
+	struct rvin_dev *master;
+	unsigned int i, n, idx, csi;
+	int ret = 0;
+
+	mutex_lock(&vin->group->lock);
+
+	for (n = 0; n < RCAR_VIN_NUM; n++) {
+
+		/* Check that VIN is part of the group */
+		if (!vin->group->vin[n])
+			continue;
+
+		/* Check that subgroup master is part of the group */
+		master = vin->group->vin[n < 4 ? 0 : 4];
+		if (!master)
+			continue;
+
+		for (i = 0; i < vin->info->num_chsels; i++) {
+			csi = vin->info->chsels[n][i].csi;
+
+			/* If the CSI-2 is out of bounds it's a noop, skip */
+			if (csi >= RVIN_CSI_MAX)
+				continue;
+
+			/* Check that CSI-2 are part of the group */
+			if (!vin->group->csi[csi].subdev)
+				continue;
+
+			source = &vin->group->csi[csi].subdev->entity;
+			sink = &vin->group->vin[n]->vdev.entity;
+			idx = vin->info->chsels[n][i].chan + 1;
+
+			ret = rvin_group_add_link(vin, source, idx, sink, 0,
+						  0);
+			if (ret)
+				goto out;
+		}
+	}
+out:
+	mutex_unlock(&vin->group->lock);
+
+	return ret;
+}
+
+static int rvin_group_notify_complete(struct v4l2_async_notifier *notifier)
 {
+	struct rvin_dev *vin = notifier_to_vin(notifier);
 	int ret;
 
+	ret = v4l2_device_register_subdev_nodes(&vin->v4l2_dev);
+	if (ret) {
+		vin_err(vin, "Failed to register subdev nodes\n");
+		return ret;
+	}
+
+	return rvin_group_update_links(vin);
+}
+
+static void rvin_group_notify_unbind(struct v4l2_async_notifier *notifier,
+				     struct v4l2_subdev *subdev,
+				     struct v4l2_async_subdev *asd)
+{
+	struct rvin_dev *vin = notifier_to_vin(notifier);
+	struct rvin_graph_entity *csi = to_rvin_graph_entity(asd);
+
+	mutex_lock(&vin->group->lock);
+	csi->subdev = NULL;
+	mutex_unlock(&vin->group->lock);
+}
+
+static int rvin_group_notify_bound(struct v4l2_async_notifier *notifier,
+				   struct v4l2_subdev *subdev,
+				   struct v4l2_async_subdev *asd)
+{
+	struct rvin_dev *vin = notifier_to_vin(notifier);
+	struct rvin_graph_entity *csi = to_rvin_graph_entity(asd);
+
+	v4l2_set_subdev_hostdata(subdev, vin);
+
+	mutex_lock(&vin->group->lock);
+	vin_dbg(vin, "Bound CSI-2 %s\n", subdev->name);
+	csi->subdev = subdev;
+	mutex_unlock(&vin->group->lock);
+
+	return 0;
+}
+
+static const struct v4l2_async_notifier_operations rvin_group_notify_ops = {
+	.bound = rvin_group_notify_bound,
+	.unbind = rvin_group_notify_unbind,
+	.complete = rvin_group_notify_complete,
+};
+
+static struct device_node *rvin_group_get_remote(struct rvin_dev *vin,
+						 struct device_node *node)
+{
+	struct device_node *np;
+
+	np = of_graph_get_remote_port_parent(node);
+	if (!np) {
+		vin_err(vin, "Remote port not found %s\n",
+			of_node_full_name(node));
+		return NULL;
+	}
+
+	/* Not all remote ports are available, this is OK */
+	if (!of_device_is_available(np)) {
+		vin_dbg(vin, "Remote port %s is not available\n",
+			of_node_full_name(np));
+		of_node_put(np);
+		return NULL;
+	}
+
+	return np;
+}
+
+/* group lock should be held when calling this function */
+static int rvin_group_graph_parse(struct rvin_dev *vin, struct device_node *np)
+{
+	int i, id, ret;
+
+	/* Read VIN id from DT */
+	id = rvin_group_read_id(vin, np);
+	if (id < 0)
+		return id;
+
+	/* Check if VIN is already handled */
+	if (vin->group->mask & BIT(id))
+		return 0;
+
+	vin->group->mask |= BIT(id);
+
+	vin_dbg(vin, "Handling VIN%d\n", id);
+
+	/* Parse all endpoints for CSI-2 and VIN nodes */
+	for (i = 0; i < RVIN_CSI_MAX; i++) {
+		struct device_node *ep, *csi, *remote;
+
+		/* Check if instance is connected to the CSI-2 */
+		ep = of_graph_get_endpoint_by_regs(np, 1, i);
+		if (!ep) {
+			vin_dbg(vin, "VIN%d: ep %d not connected\n", id, i);
+			continue;
+		}
+
+		if (vin->group->csi[i].asd.match.fwnode.fwnode) {
+			of_node_put(ep);
+			vin_dbg(vin, "VIN%d: ep %d already handled\n", id, i);
+			continue;
+		}
+
+		csi = rvin_group_get_remote(vin, ep);
+		of_node_put(ep);
+		if (!csi)
+			continue;
+
+		vin->group->csi[i].asd.match.fwnode.fwnode =
+			of_fwnode_handle(csi);
+		vin->group->csi[i].asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
+
+		vin_dbg(vin, "VIN%d ep: %d handled CSI-2 %s\n", id, i,
+			of_node_full_name(csi));
+
+		/* Parse the CSI-2 for all VIN nodes connected to it */
+		ep = NULL;
+		while (1) {
+			ep = of_graph_get_next_endpoint(csi, ep);
+			if (!ep)
+				break;
+
+			remote = rvin_group_get_remote(vin, ep);
+			if (!remote)
+				continue;
+
+			if (of_match_node(vin->dev->driver->of_match_table,
+					  remote)) {
+				ret = rvin_group_graph_parse(vin, remote);
+				if (ret)
+					return ret;
+
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int rvin_group_graph_register(struct rvin_dev *vin)
+{
+	struct v4l2_async_subdev **subdevs = NULL;
+	int i, n, ret, count = 0;
+
+	mutex_lock(&vin->group->lock);
+
+	/* Count how many CSI-2 nodes found */
+	for (i = 0; i < RVIN_CSI_MAX; i++)
+		if (vin->group->csi[i].asd.match.fwnode.fwnode)
+			count++;
+
+	if (!count) {
+		mutex_unlock(&vin->group->lock);
+		return 0;
+	}
+
+	/* Allocate and setup list of subdevices for the notifier */
+	subdevs = devm_kzalloc(vin->dev, sizeof(*subdevs) * count, GFP_KERNEL);
+	if (subdevs == NULL) {
+		mutex_unlock(&vin->group->lock);
+		return -ENOMEM;
+	}
+
+	n = 0;
+	for (i = 0; i < RVIN_CSI_MAX; i++)
+		if (vin->group->csi[i].asd.match.fwnode.fwnode)
+			subdevs[n++] = &vin->group->csi[i].asd;
+
+	vin_dbg(vin, "Claimed %d subdevices for group\n", count);
+
+	vin->notifier.num_subdevs = count;
+	vin->notifier.subdevs = subdevs;
+	vin->notifier.ops = &rvin_group_notify_ops;
+
+	mutex_unlock(&vin->group->lock);
+
+	ret = v4l2_async_notifier_register(&vin->v4l2_dev, &vin->notifier);
+	if (ret < 0)
+		vin_err(vin, "Notifier registration failed\n");
+
+	return ret;
+}
+
+static int rvin_group_init(struct rvin_dev *vin)
+{
+	int i, ret, count_mask, count_vin = 0;
+
 	ret = rvin_group_allocate(vin);
 	if (ret)
 		return ret;
@@ -422,8 +681,44 @@ static int rvin_group_init(struct rvin_dev *vin)
 	if (ret)
 		goto error_group;
 
+	/*
+	 * Check number of registered VINs in group against the group mask.
+	 * If the mask is empty DT has not yet been parsed and if the
+	 * count matches all VINs are registered and it's safe to register
+	 * the async notifier
+	 */
+	mutex_lock(&vin->group->lock);
+
+	if (!vin->group->mask) {
+		ret = rvin_group_graph_parse(vin, vin->dev->of_node);
+		if (ret) {
+			mutex_unlock(&vin->group->lock);
+			goto error_group;
+		}
+	}
+
+	for (i = 0; i < RCAR_VIN_NUM; i++)
+		if (vin->group->vin[i])
+			count_vin++;
+
+	count_mask = hweight_long(vin->group->mask);
+
+	mutex_unlock(&vin->group->lock);
+
+	ret = rvin_v4l2_register(vin);
+	if (ret)
+		goto error_group;
+
+	if (count_vin == count_mask) {
+		ret = rvin_group_graph_register(vin);
+		if (ret)
+			goto error_vdev;
+	}
+
 	return 0;
 
+error_vdev:
+	rvin_v4l2_unregister(vin);
 error_group:
 	rvin_group_delete(vin);
 
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 41c81b8d9fb8e851..97f168f8169ceeb1 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -92,6 +92,9 @@ struct rvin_graph_entity {
 	unsigned int sink_pad;
 };
 
+#define to_rvin_graph_entity(asd) \
+	container_of(asd, struct rvin_graph_entity, asd)
+
 struct rvin_group;
 
 /** struct rvin_group_chsel - Map a CSI-2 receiver and channel to a CHSEL value
@@ -211,7 +214,8 @@ struct rvin_dev {
  *
  * @mdev:		media device which represents the group
  *
- * @lock:		protects the vin and csi members
+ * @lock:		protects the mask, vin and csi members
+ * @mask:		Mask of VIN instances found in DT
  * @vin:		VIN instances which are part of the group
  * @csi:		CSI-2 entities that are part of the group
  */
@@ -221,6 +225,7 @@ struct rvin_group {
 	struct media_device mdev;
 
 	struct mutex lock;
+	unsigned long mask;
 	struct rvin_dev *vin[RCAR_VIN_NUM];
 	struct rvin_graph_entity csi[RVIN_CSI_MAX];
 };
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 22/25] rcar-vin: add link notify for Gen3
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (20 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 21/25] rcar-vin: parse Gen3 OF and setup media graph Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-17 11:29   ` Hans Verkuil
  2017-11-11  0:38 ` [PATCH v7 23/25] rcar-vin: extend {start,stop}_streaming to work with media controller Niklas Söderlund
                   ` (2 subsequent siblings)
  24 siblings, 1 reply; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

Add the ability to process media device link change request. Link
enabling is a bit complicated on Gen3, whether or not it's possible to
enable a link depends on what other links already are enabled. On Gen3
the 8 VINs are split into two subgroup's (VIN0-3 and VIN4-7) and from a
routing perspective these two groups are independent of each other.
Each subgroup's routing is controlled by the subgroup VIN master
instance (VIN0 and VIN4).

There are a limited number of possible route setups available for each
subgroup and the configuration of each setup is dictated by the
hardware. On H3 for example there are 6 possible route setups for each
subgroup to choose from.

This leads to the media device link notification code being rather large
since it will find the best routing configuration to try and accommodate
as many links as possible. When it's not possible to enable a new link
due to hardware constrains the link_notifier callback will return
-EMLINK.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 205 ++++++++++++++++++++++++++++
 1 file changed, 205 insertions(+)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 78a9766eb7114959..79b0334d8c563328 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -27,6 +27,209 @@
 
 #include "rcar-vin.h"
 
+/* -----------------------------------------------------------------------------
+ * Media Controller link notification
+ */
+
+static unsigned int rvin_group_csi_pad_to_chan(unsigned int pad)
+{
+	/*
+	 * The companion CSI-2 receiver driver (rcar-csi2) is known
+	 * and we know it have one source pad (pad 0) and four sink
+	 * pads (pad 1-4). So to translate a pad on the remote
+	 * CSI-2 receiver to the VIN internal channel number simply
+	 * subtract one from the pad number.
+	 */
+	return pad - 1;
+}
+
+/* group lock should be held when calling this function */
+static int rvin_group_entity_to_vin_num(struct rvin_group *group,
+					struct media_entity *entity)
+{
+	struct video_device *vdev;
+	int i;
+
+	if (!is_media_entity_v4l2_video_device(entity))
+		return -ENODEV;
+
+	vdev = media_entity_to_video_device(entity);
+
+	for (i = 0; i < RCAR_VIN_NUM; i++) {
+		if (!group->vin[i])
+			continue;
+
+		if (&group->vin[i]->vdev == vdev)
+			return i;
+	}
+
+	return -ENODEV;
+}
+
+/* group lock should be held when calling this function */
+static int rvin_group_entity_to_csi_num(struct rvin_group *group,
+					struct media_entity *entity)
+{
+	struct v4l2_subdev *sd;
+	int i;
+
+	if (!is_media_entity_v4l2_subdev(entity))
+		return -ENODEV;
+
+	sd = media_entity_to_v4l2_subdev(entity);
+
+	for (i = 0; i < RVIN_CSI_MAX; i++)
+		if (group->csi[i].subdev == sd)
+			return i;
+
+	return -ENODEV;
+}
+
+/* group lock should be held when calling this function */
+static void __rvin_group_build_link_list(struct rvin_group *group,
+					 struct rvin_group_chsel *map,
+					 int start, int len)
+{
+	struct media_pad *vin_pad, *remote_pad;
+	unsigned int n;
+
+	for (n = 0; n < len; n++) {
+		map[n].csi = -1;
+		map[n].chan = -1;
+
+		if (!group->vin[start + n])
+			continue;
+
+		vin_pad = &group->vin[start + n]->vdev.entity.pads[0];
+
+		remote_pad = media_entity_remote_pad(vin_pad);
+		if (!remote_pad)
+			continue;
+
+		map[n].csi =
+			rvin_group_entity_to_csi_num(group, remote_pad->entity);
+		map[n].chan = rvin_group_csi_pad_to_chan(remote_pad->index);
+	}
+}
+
+/* group lock should be held when calling this function */
+static int __rvin_group_try_get_chsel(struct rvin_group *group,
+				      struct rvin_group_chsel *map,
+				      int start, int len)
+{
+	const struct rvin_group_chsel *sel;
+	unsigned int i, n;
+	int chsel;
+
+	for (i = 0; i < group->vin[start]->info->num_chsels; i++) {
+		chsel = i;
+		for (n = 0; n < len; n++) {
+
+			/* If the link is not active it's OK */
+			if (map[n].csi == -1)
+				continue;
+
+			/* Check if chsel matches requested link */
+			sel = &group->vin[start]->info->chsels[start + n][i];
+			if (map[n].csi != sel->csi ||
+			    map[n].chan != sel->chan) {
+				chsel = -1;
+				break;
+			}
+		}
+
+		/* A chsel which satisfies the links has been found */
+		if (chsel != -1)
+			return chsel;
+	}
+
+	/* No chsel can satisfy the requested links */
+	return -1;
+}
+
+/* group lock should be held when calling this function */
+static bool rvin_group_in_use(struct rvin_group *group)
+{
+	struct media_entity *entity;
+
+	media_device_for_each_entity(entity, &group->mdev)
+		if (entity->use_count)
+			return true;
+
+	return false;
+}
+
+static int rvin_group_link_notify(struct media_link *link, u32 flags,
+				  unsigned int notification)
+{
+	struct rvin_group *group = container_of(link->graph_obj.mdev,
+						struct rvin_group, mdev);
+	struct rvin_group_chsel chsel_map[4];
+	int vin_num, vin_master, csi_num, csi_chan;
+	unsigned int chsel;
+
+	mutex_lock(&group->lock);
+
+	vin_num = rvin_group_entity_to_vin_num(group, link->sink->entity);
+	csi_num = rvin_group_entity_to_csi_num(group, link->source->entity);
+	csi_chan = rvin_group_csi_pad_to_chan(link->source->index);
+
+	/*
+	 * Figure out which VIN node is the subgroup master.
+	 *
+	 * VIN0-3 are controlled by VIN0
+	 * VIN4-7 are controlled by VIN4
+	 */
+	vin_master = vin_num < 4 ? 0 : 4;
+
+	/* If not all devices exist something is horribly wrong */
+	if (vin_num < 0 || csi_num < 0 || !group->vin[vin_master])
+		goto error;
+
+	/* Special checking only needed for links which are to be enabled */
+	if (notification != MEDIA_DEV_NOTIFY_PRE_LINK_CH ||
+	    !(flags & MEDIA_LNK_FL_ENABLED))
+		goto out;
+
+	/* If any link in the group is in use, no new link can be enabled */
+	if (rvin_group_in_use(group))
+		goto error;
+
+	/* If the VIN already has an active link it's busy */
+	if (media_entity_remote_pad(&link->sink->entity->pads[0]))
+		goto error;
+
+	/* Build list of active links */
+	__rvin_group_build_link_list(group, chsel_map, vin_master, 4);
+
+	/* Add the new proposed link */
+	chsel_map[vin_num - vin_master].csi = csi_num;
+	chsel_map[vin_num - vin_master].chan = csi_chan;
+
+	/* See if there is a chsel value which matches our link selection */
+	chsel = __rvin_group_try_get_chsel(group, chsel_map, vin_master, 4);
+
+	/* No chsel can provide the requested links */
+	if (chsel == -1)
+		goto error;
+
+	/* Update chsel value at group master */
+	rvin_set_chsel(group->vin[vin_master], chsel);
+
+out:
+	mutex_unlock(&group->lock);
+
+	return v4l2_pipeline_link_notify(link, flags, notification);
+error:
+	mutex_unlock(&group->lock);
+
+	return -EMLINK;
+}
+
+static const struct media_device_ops rvin_media_ops = {
+	.link_notify = rvin_group_link_notify,
+};
+
 /* -----------------------------------------------------------------------------
  * Gen3 CSI2 Group Allocator
  */
@@ -147,6 +350,8 @@ static int rvin_group_allocate(struct rvin_dev *vin)
 			sizeof(mdev->bus_info));
 		media_device_init(mdev);
 
+		mdev->ops = &rvin_media_ops;
+
 		ret = media_device_register(mdev);
 		if (ret) {
 			vin_err(vin, "Failed to register media device\n");
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 23/25] rcar-vin: extend {start,stop}_streaming to work with media controller
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (21 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 22/25] rcar-vin: add link notify for Gen3 Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-17 11:31   ` Hans Verkuil
  2017-11-11  0:38 ` [PATCH v7 24/25] rcar-vin: enable support for r8a7795 Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 25/25] rcar-vin: enable support for r8a7796 Niklas Söderlund
  24 siblings, 1 reply; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

The procedure to start or stop streaming using the non-MC single
subdevice and the MC graph and multiple subdevices are quite different.
Create a new function to abstract which method is used based on which
mode the driver is running in and add logic to start the MC graph.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/media/platform/rcar-vin/rcar-dma.c | 113 +++++++++++++++++++++++++++--
 1 file changed, 106 insertions(+), 7 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index fe1319eb4c5df02d..b16b892a4de876bb 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -1087,15 +1087,116 @@ static void rvin_buffer_queue(struct vb2_buffer *vb)
 	spin_unlock_irqrestore(&vin->qlock, flags);
 }
 
+static int rvin_set_stream(struct rvin_dev *vin, int on)
+{
+	struct v4l2_subdev_format fmt = {
+		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+	};
+	struct media_pipeline *pipe;
+	struct  v4l2_subdev *sd;
+	struct media_pad *pad;
+	int ret;
+
+	/* No media controller used, simply pass operation to subdevice */
+	if (!vin->info->use_mc) {
+		ret = v4l2_subdev_call(vin->digital->subdev, video, s_stream,
+				       on);
+
+		return ret == -ENOIOCTLCMD ? 0 : ret;
+	}
+
+	pad = media_entity_remote_pad(&vin->pad);
+	if (!pad)
+		return -EPIPE;
+
+	sd = media_entity_to_v4l2_subdev(pad->entity);
+	if (!sd)
+		return -EPIPE;
+
+	if (!on) {
+		media_pipeline_stop(&vin->vdev.entity);
+		ret = v4l2_subdev_call(sd, video, s_stream, 0);
+		return 0;
+	}
+
+	fmt.pad = pad->index;
+	if (v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt))
+		return -EPIPE;
+
+	switch (fmt.format.code) {
+	case MEDIA_BUS_FMT_YUYV8_1X16:
+	case MEDIA_BUS_FMT_UYVY8_2X8:
+	case MEDIA_BUS_FMT_UYVY10_2X10:
+	case MEDIA_BUS_FMT_RGB888_1X24:
+		vin->code = fmt.format.code;
+		break;
+	default:
+		return -EPIPE;
+	}
+
+	switch (fmt.format.field) {
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+	case V4L2_FIELD_NONE:
+	case V4L2_FIELD_INTERLACED_TB:
+	case V4L2_FIELD_INTERLACED_BT:
+	case V4L2_FIELD_INTERLACED:
+	case V4L2_FIELD_SEQ_TB:
+	case V4L2_FIELD_SEQ_BT:
+		/* Supported nativly */
+		break;
+	case V4L2_FIELD_ALTERNATE:
+		switch (vin->format.field) {
+		case V4L2_FIELD_TOP:
+		case V4L2_FIELD_BOTTOM:
+		case V4L2_FIELD_NONE:
+			break;
+		case V4L2_FIELD_INTERLACED_TB:
+		case V4L2_FIELD_INTERLACED_BT:
+		case V4L2_FIELD_INTERLACED:
+		case V4L2_FIELD_SEQ_TB:
+		case V4L2_FIELD_SEQ_BT:
+			/* Use VIN hardware to combine the two fields */
+			fmt.format.height *= 2;
+			break;
+		default:
+			return -EPIPE;
+		}
+		break;
+	default:
+		return -EPIPE;
+	}
+
+	if (fmt.format.width != vin->format.width ||
+	    fmt.format.height != vin->format.height)
+		return -EPIPE;
+
+	pipe = sd->entity.pipe ? sd->entity.pipe : &vin->vdev.pipe;
+	if (media_pipeline_start(&vin->vdev.entity, pipe))
+		return -EPIPE;
+
+	ret = v4l2_subdev_call(sd, video, s_stream, 1);
+	if (ret == -ENOIOCTLCMD)
+		ret = 0;
+	if (ret)
+		media_pipeline_stop(&vin->vdev.entity);
+
+	return ret;
+}
+
 static int rvin_start_streaming(struct vb2_queue *vq, unsigned int count)
 {
 	struct rvin_dev *vin = vb2_get_drv_priv(vq);
-	struct v4l2_subdev *sd;
 	unsigned long flags;
 	int ret;
 
-	sd = vin_to_source(vin);
-	v4l2_subdev_call(sd, video, s_stream, 1);
+	ret = rvin_set_stream(vin, 1);
+	if (ret) {
+		spin_lock_irqsave(&vin->qlock, flags);
+		return_all_buffers(vin, VB2_BUF_STATE_QUEUED);
+		spin_unlock_irqrestore(&vin->qlock, flags);
+		return ret;
+	}
 
 	spin_lock_irqsave(&vin->qlock, flags);
 
@@ -1104,7 +1205,7 @@ static int rvin_start_streaming(struct vb2_queue *vq, unsigned int count)
 	ret = rvin_capture_start(vin);
 	if (ret) {
 		return_all_buffers(vin, VB2_BUF_STATE_QUEUED);
-		v4l2_subdev_call(sd, video, s_stream, 0);
+		rvin_set_stream(vin, 0);
 	}
 
 	spin_unlock_irqrestore(&vin->qlock, flags);
@@ -1115,7 +1216,6 @@ static int rvin_start_streaming(struct vb2_queue *vq, unsigned int count)
 static void rvin_stop_streaming(struct vb2_queue *vq)
 {
 	struct rvin_dev *vin = vb2_get_drv_priv(vq);
-	struct v4l2_subdev *sd;
 	unsigned long flags;
 	int retries = 0;
 
@@ -1154,8 +1254,7 @@ static void rvin_stop_streaming(struct vb2_queue *vq)
 
 	spin_unlock_irqrestore(&vin->qlock, flags);
 
-	sd = vin_to_source(vin);
-	v4l2_subdev_call(sd, video, s_stream, 0);
+	rvin_set_stream(vin, 0);
 
 	/* disable interrupts */
 	rvin_disable_interrupts(vin);
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 24/25] rcar-vin: enable support for r8a7795
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (22 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 23/25] rcar-vin: extend {start,stop}_streaming to work with media controller Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-11  0:38 ` [PATCH v7 25/25] rcar-vin: enable support for r8a7796 Niklas Söderlund
  24 siblings, 0 replies; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

Add the SoC specific information for Renesas r8a7795 ES1.x and ES2.0.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/Kconfig     |   2 +-
 drivers/media/platform/rcar-vin/rcar-core.c | 150 ++++++++++++++++++++++++++++
 2 files changed, 151 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/rcar-vin/Kconfig b/drivers/media/platform/rcar-vin/Kconfig
index af4c98b44d2e22cb..8fa7ee468c63afb9 100644
--- a/drivers/media/platform/rcar-vin/Kconfig
+++ b/drivers/media/platform/rcar-vin/Kconfig
@@ -6,7 +6,7 @@ config VIDEO_RCAR_VIN
 	select V4L2_FWNODE
 	---help---
 	  Support for Renesas R-Car Video Input (VIN) driver.
-	  Supports R-Car Gen2 SoCs.
+	  Supports R-Car Gen2 and Gen3 SoCs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called rcar-vin.
diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 79b0334d8c563328..b22f6596700d2479 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include <media/v4l2-async.h>
 #include <media/v4l2-fwnode.h>
@@ -955,6 +956,134 @@ static const struct rvin_info rcar_info_gen2 = {
 	.max_height = 2048,
 };
 
+static const struct rvin_info rcar_info_r8a7795 = {
+	.chip = RCAR_GEN3,
+	.use_mc = true,
+	.max_width = 4096,
+	.max_height = 4096,
+
+	.num_chsels = 5,
+	.chsels = {
+		{
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 1 },
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+		}, {
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 1 },
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 1 },
+			{ .csi = RVIN_CSI20, .chan = 1 },
+		}, {
+			{ .csi = RVIN_CSI20, .chan = 1 },
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 2 },
+			{ .csi = RVIN_CSI20, .chan = 2 },
+		}, {
+			{ .csi = RVIN_CSI40, .chan = 1 },
+			{ .csi = RVIN_CSI20, .chan = 1 },
+			{ .csi = RVIN_CSI20, .chan = 1 },
+			{ .csi = RVIN_CSI40, .chan = 3 },
+			{ .csi = RVIN_CSI20, .chan = 3 },
+		}, {
+			{ .csi = RVIN_CSI41, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI41, .chan = 1 },
+			{ .csi = RVIN_CSI41, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+		}, {
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI41, .chan = 1 },
+			{ .csi = RVIN_CSI41, .chan = 0 },
+			{ .csi = RVIN_CSI41, .chan = 1 },
+			{ .csi = RVIN_CSI20, .chan = 1 },
+		}, {
+			{ .csi = RVIN_CSI20, .chan = 1 },
+			{ .csi = RVIN_CSI41, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI41, .chan = 2 },
+			{ .csi = RVIN_CSI20, .chan = 2 },
+		}, {
+			{ .csi = RVIN_CSI41, .chan = 1 },
+			{ .csi = RVIN_CSI20, .chan = 1 },
+			{ .csi = RVIN_CSI20, .chan = 1 },
+			{ .csi = RVIN_CSI41, .chan = 3 },
+			{ .csi = RVIN_CSI20, .chan = 3 },
+		},
+	},
+};
+
+static const struct rvin_info rcar_info_r8a7795es1 = {
+	.chip = RCAR_GEN3,
+	.use_mc = true,
+	.max_width = 4096,
+	.max_height = 4096,
+
+	.num_chsels = 6,
+	.chsels = {
+		{
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI21, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI21, .chan = 0 },
+		}, {
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI21, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 1 },
+			{ .csi = RVIN_CSI20, .chan = 1 },
+			{ .csi = RVIN_CSI21, .chan = 1 },
+		}, {
+			{ .csi = RVIN_CSI21, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 2 },
+			{ .csi = RVIN_CSI20, .chan = 2 },
+			{ .csi = RVIN_CSI21, .chan = 2 },
+		}, {
+			{ .csi = RVIN_CSI40, .chan = 1 },
+			{ .csi = RVIN_CSI20, .chan = 1 },
+			{ .csi = RVIN_CSI21, .chan = 1 },
+			{ .csi = RVIN_CSI40, .chan = 3 },
+			{ .csi = RVIN_CSI20, .chan = 3 },
+			{ .csi = RVIN_CSI21, .chan = 3 },
+		}, {
+			{ .csi = RVIN_CSI41, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI21, .chan = 0 },
+			{ .csi = RVIN_CSI41, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI21, .chan = 0 },
+		}, {
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI21, .chan = 0 },
+			{ .csi = RVIN_CSI41, .chan = 0 },
+			{ .csi = RVIN_CSI41, .chan = 1 },
+			{ .csi = RVIN_CSI20, .chan = 1 },
+			{ .csi = RVIN_CSI21, .chan = 1 },
+		}, {
+			{ .csi = RVIN_CSI21, .chan = 0 },
+			{ .csi = RVIN_CSI41, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI41, .chan = 2 },
+			{ .csi = RVIN_CSI20, .chan = 2 },
+			{ .csi = RVIN_CSI21, .chan = 2 },
+		}, {
+			{ .csi = RVIN_CSI41, .chan = 1 },
+			{ .csi = RVIN_CSI20, .chan = 1 },
+			{ .csi = RVIN_CSI21, .chan = 1 },
+			{ .csi = RVIN_CSI41, .chan = 3 },
+			{ .csi = RVIN_CSI20, .chan = 3 },
+			{ .csi = RVIN_CSI21, .chan = 3 },
+		},
+	},
+};
+
 static const struct of_device_id rvin_of_id_table[] = {
 	{
 		.compatible = "renesas,vin-r8a7778",
@@ -984,12 +1113,25 @@ static const struct of_device_id rvin_of_id_table[] = {
 		.compatible = "renesas,rcar-gen2-vin",
 		.data = &rcar_info_gen2,
 	},
+	{
+		.compatible = "renesas,vin-r8a7795",
+		.data = &rcar_info_r8a7795,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, rvin_of_id_table);
 
+static const struct soc_device_attribute r8a7795es1[] = {
+	{
+		.soc_id = "r8a7795", .revision = "ES1.*",
+		.data = &rcar_info_r8a7795es1,
+	},
+	{ /* sentinel */ }
+};
+
 static int rcar_vin_probe(struct platform_device *pdev)
 {
+	const struct soc_device_attribute *attr;
 	struct rvin_dev *vin;
 	struct resource *mem;
 	int irq, ret;
@@ -1001,6 +1143,14 @@ static int rcar_vin_probe(struct platform_device *pdev)
 	vin->dev = &pdev->dev;
 	vin->info = of_device_get_match_data(&pdev->dev);
 
+	/*
+	 * Special care is needed on r8a7795 ES1.x since it
+	 * uses different routing than r8a7795 ES2.0.
+	 */
+	attr = soc_device_match(r8a7795es1);
+	if (attr)
+		vin->info = attr->data;
+
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (mem == NULL)
 		return -EINVAL;
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v7 25/25] rcar-vin: enable support for r8a7796
  2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
                   ` (23 preceding siblings ...)
  2017-11-11  0:38 ` [PATCH v7 24/25] rcar-vin: enable support for r8a7795 Niklas Söderlund
@ 2017-11-11  0:38 ` Niklas Söderlund
  2017-11-13  8:42   ` Geert Uytterhoeven
  24 siblings, 1 reply; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-11  0:38 UTC (permalink / raw)
  To: Laurent Pinchart, Hans Verkuil, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
	Niklas Söderlund

Add the SoC specific information for Renesas r8a7796.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 .../devicetree/bindings/media/rcar_vin.txt         |  1 +
 drivers/media/platform/rcar-vin/rcar-core.c        | 64 ++++++++++++++++++++++
 2 files changed, 65 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index df1abd0fb20386f8..ddf249c2276600d2 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -10,6 +10,7 @@ Depending on the instance the VIN input is connected to external SoC pins, or
 on Gen3 to a CSI-2 receiver.
 
  - compatible: Must be one or more of the following
+   - "renesas,vin-r8a7796" for the R8A7796 device
    - "renesas,vin-r8a7795" for the R8A7795 device
    - "renesas,vin-r8a7794" for the R8A7794 device
    - "renesas,vin-r8a7793" for the R8A7793 device
diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index b22f6596700d2479..e329de4ce0172e8d 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -1084,6 +1084,66 @@ static const struct rvin_info rcar_info_r8a7795es1 = {
 	},
 };
 
+static const struct rvin_info rcar_info_r8a7796 = {
+	.chip = RCAR_GEN3,
+	.use_mc = true,
+	.max_width = 4096,
+	.max_height = 4096,
+
+	.num_chsels = 5,
+	.chsels = {
+		{
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_NC, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+		}, {
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_NC, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 1 },
+			{ .csi = RVIN_CSI20, .chan = 1 },
+		}, {
+			{ .csi = RVIN_NC, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 2 },
+			{ .csi = RVIN_CSI20, .chan = 2 },
+		}, {
+			{ .csi = RVIN_CSI40, .chan = 1 },
+			{ .csi = RVIN_CSI20, .chan = 1 },
+			{ .csi = RVIN_NC, .chan = 1 },
+			{ .csi = RVIN_CSI40, .chan = 3 },
+			{ .csi = RVIN_CSI20, .chan = 3 },
+		}, {
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_NC, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+		}, {
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_NC, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 1 },
+			{ .csi = RVIN_CSI20, .chan = 1 },
+		}, {
+			{ .csi = RVIN_NC, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 0 },
+			{ .csi = RVIN_CSI20, .chan = 0 },
+			{ .csi = RVIN_CSI40, .chan = 2 },
+			{ .csi = RVIN_CSI20, .chan = 2 },
+		}, {
+			{ .csi = RVIN_CSI40, .chan = 1 },
+			{ .csi = RVIN_CSI20, .chan = 1 },
+			{ .csi = RVIN_NC, .chan = 1 },
+			{ .csi = RVIN_CSI40, .chan = 3 },
+			{ .csi = RVIN_CSI20, .chan = 3 },
+		},
+	},
+};
+
 static const struct of_device_id rvin_of_id_table[] = {
 	{
 		.compatible = "renesas,vin-r8a7778",
@@ -1117,6 +1177,10 @@ static const struct of_device_id rvin_of_id_table[] = {
 		.compatible = "renesas,vin-r8a7795",
 		.data = &rcar_info_r8a7795,
 	},
+	{
+		.compatible = "renesas,vin-r8a7796",
+		.data = &rcar_info_r8a7796,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, rvin_of_id_table);
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* Re: [PATCH v7 25/25] rcar-vin: enable support for r8a7796
  2017-11-11  0:38 ` [PATCH v7 25/25] rcar-vin: enable support for r8a7796 Niklas Söderlund
@ 2017-11-13  8:42   ` Geert Uytterhoeven
  0 siblings, 0 replies; 35+ messages in thread
From: Geert Uytterhoeven @ 2017-11-13  8:42 UTC (permalink / raw)
  To: Niklas Söderlund
  Cc: Laurent Pinchart, Hans Verkuil, Linux Media Mailing List,
	Linux-Renesas, Fukawa, Kieran Bingham, Mark Rutland, Rob Herring,
	devicetree

CC DT

On Sat, Nov 11, 2017 at 1:38 AM, Niklas Söderlund
<niklas.soderlund+renesas@ragnatech.se> wrote:
> Add the SoC specific information for Renesas r8a7796.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
> ---
>  .../devicetree/bindings/media/rcar_vin.txt         |  1 +
>  drivers/media/platform/rcar-vin/rcar-core.c        | 64 ++++++++++++++++++++++
>  2 files changed, 65 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
> index df1abd0fb20386f8..ddf249c2276600d2 100644
> --- a/Documentation/devicetree/bindings/media/rcar_vin.txt
> +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
> @@ -10,6 +10,7 @@ Depending on the instance the VIN input is connected to external SoC pins, or
>  on Gen3 to a CSI-2 receiver.
>
>   - compatible: Must be one or more of the following
> +   - "renesas,vin-r8a7796" for the R8A7796 device
>     - "renesas,vin-r8a7795" for the R8A7795 device
>     - "renesas,vin-r8a7794" for the R8A7794 device
>     - "renesas,vin-r8a7793" for the R8A7793 device
> diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
> index b22f6596700d2479..e329de4ce0172e8d 100644
> --- a/drivers/media/platform/rcar-vin/rcar-core.c
> +++ b/drivers/media/platform/rcar-vin/rcar-core.c
> @@ -1084,6 +1084,66 @@ static const struct rvin_info rcar_info_r8a7795es1 = {
>         },
>  };
>
> +static const struct rvin_info rcar_info_r8a7796 = {
> +       .chip = RCAR_GEN3,
> +       .use_mc = true,
> +       .max_width = 4096,
> +       .max_height = 4096,
> +
> +       .num_chsels = 5,
> +       .chsels = {
> +               {
> +                       { .csi = RVIN_CSI40, .chan = 0 },
> +                       { .csi = RVIN_CSI20, .chan = 0 },
> +                       { .csi = RVIN_NC, .chan = 0 },
> +                       { .csi = RVIN_CSI40, .chan = 0 },
> +                       { .csi = RVIN_CSI20, .chan = 0 },
> +               }, {
> +                       { .csi = RVIN_CSI20, .chan = 0 },
> +                       { .csi = RVIN_NC, .chan = 0 },
> +                       { .csi = RVIN_CSI40, .chan = 0 },
> +                       { .csi = RVIN_CSI40, .chan = 1 },
> +                       { .csi = RVIN_CSI20, .chan = 1 },
> +               }, {
> +                       { .csi = RVIN_NC, .chan = 0 },
> +                       { .csi = RVIN_CSI40, .chan = 0 },
> +                       { .csi = RVIN_CSI20, .chan = 0 },
> +                       { .csi = RVIN_CSI40, .chan = 2 },
> +                       { .csi = RVIN_CSI20, .chan = 2 },
> +               }, {
> +                       { .csi = RVIN_CSI40, .chan = 1 },
> +                       { .csi = RVIN_CSI20, .chan = 1 },
> +                       { .csi = RVIN_NC, .chan = 1 },
> +                       { .csi = RVIN_CSI40, .chan = 3 },
> +                       { .csi = RVIN_CSI20, .chan = 3 },
> +               }, {
> +                       { .csi = RVIN_CSI40, .chan = 0 },
> +                       { .csi = RVIN_CSI20, .chan = 0 },
> +                       { .csi = RVIN_NC, .chan = 0 },
> +                       { .csi = RVIN_CSI40, .chan = 0 },
> +                       { .csi = RVIN_CSI20, .chan = 0 },
> +               }, {
> +                       { .csi = RVIN_CSI20, .chan = 0 },
> +                       { .csi = RVIN_NC, .chan = 0 },
> +                       { .csi = RVIN_CSI40, .chan = 0 },
> +                       { .csi = RVIN_CSI40, .chan = 1 },
> +                       { .csi = RVIN_CSI20, .chan = 1 },
> +               }, {
> +                       { .csi = RVIN_NC, .chan = 0 },
> +                       { .csi = RVIN_CSI40, .chan = 0 },
> +                       { .csi = RVIN_CSI20, .chan = 0 },
> +                       { .csi = RVIN_CSI40, .chan = 2 },
> +                       { .csi = RVIN_CSI20, .chan = 2 },
> +               }, {
> +                       { .csi = RVIN_CSI40, .chan = 1 },
> +                       { .csi = RVIN_CSI20, .chan = 1 },
> +                       { .csi = RVIN_NC, .chan = 1 },
> +                       { .csi = RVIN_CSI40, .chan = 3 },
> +                       { .csi = RVIN_CSI20, .chan = 3 },
> +               },
> +       },
> +};
> +
>  static const struct of_device_id rvin_of_id_table[] = {
>         {
>                 .compatible = "renesas,vin-r8a7778",
> @@ -1117,6 +1177,10 @@ static const struct of_device_id rvin_of_id_table[] = {
>                 .compatible = "renesas,vin-r8a7795",
>                 .data = &rcar_info_r8a7795,
>         },
> +       {
> +               .compatible = "renesas,vin-r8a7796",
> +               .data = &rcar_info_r8a7796,
> +       },
>         { },
>  };
>  MODULE_DEVICE_TABLE(of, rvin_of_id_table);
> --
> 2.15.0

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v7 01/25] rcar-vin: add Gen3 devicetree bindings documentation
  2017-11-11  0:38 ` [PATCH v7 01/25] rcar-vin: add Gen3 devicetree bindings documentation Niklas Söderlund
@ 2017-11-15 20:02   ` Rob Herring
  2017-11-15 22:58     ` Niklas Söderlund
  0 siblings, 1 reply; 35+ messages in thread
From: Rob Herring @ 2017-11-15 20:02 UTC (permalink / raw)
  To: Niklas Söderlund
  Cc: Laurent Pinchart, Hans Verkuil, linux-media, linux-renesas-soc,
	tomoharu.fukawa.eb, Kieran Bingham, devicetree

On Sat, Nov 11, 2017 at 01:38:11AM +0100, Niklas Söderlund wrote:
> Document the devicetree bindings for the CSI-2 inputs available on Gen3.
> 
> There is a need to add a custom property 'renesas,id' and to define
> which CSI-2 input is described in which endpoint under the port@1 node.
> This information is needed since there are a set of predefined routes
> between each VIN and CSI-2 block. This routing table will be kept
> inside the driver but in order for it to act on it it must know which
> VIN and CSI-2 is which.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
>  .../devicetree/bindings/media/rcar_vin.txt         | 116 ++++++++++++++++++---
>  1 file changed, 104 insertions(+), 12 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
> index 6e4ef8caf759e5d3..df1abd0fb20386f8 100644
> --- a/Documentation/devicetree/bindings/media/rcar_vin.txt
> +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
> @@ -2,8 +2,12 @@ Renesas R-Car Video Input driver (rcar_vin)
>  -------------------------------------------
>  
>  The rcar_vin device provides video input capabilities for the Renesas R-Car
> -family of devices. The current blocks are always slaves and suppot one input
> -channel which can be either RGB, YUYV or BT656.
> +family of devices.
> +
> +Each VIN instance has a single parallel input that supports RGB and YUV video,
> +with both external synchronization and BT.656 synchronization for the latter.
> +Depending on the instance the VIN input is connected to external SoC pins, or
> +on Gen3 to a CSI-2 receiver.
>  
>   - compatible: Must be one or more of the following
>     - "renesas,vin-r8a7795" for the R8A7795 device
> @@ -28,21 +32,38 @@ channel which can be either RGB, YUYV or BT656.
>  Additionally, an alias named vinX will need to be created to specify
>  which video input device this is.
>  
> -The per-board settings:
> +The per-board settings Gen2:
>   - port sub-node describing a single endpoint connected to the vin
>     as described in video-interfaces.txt[1]. Only the first one will
>     be considered as each vin interface has one input port.
>  
> -   These settings are used to work out video input format and widths
> -   into the system.
> +The per-board settings Gen3:
> +
> +Gen3 can support both a single connected parallel input source from
> +external SoC pins (port0) and/or multiple parallel input sources from
> +local SoC CSI-2 receivers (port1) depending on SoC.
>  
> +- renesas,id - ID number of the VIN, VINx in the documentation.

Why is this needed? We try to avoid indexes unless that's the only way a 
device is addressed (and then we use reg).

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v7 01/25] rcar-vin: add Gen3 devicetree bindings documentation
  2017-11-15 20:02   ` Rob Herring
@ 2017-11-15 22:58     ` Niklas Söderlund
  2017-11-17 13:41       ` Rob Herring
  0 siblings, 1 reply; 35+ messages in thread
From: Niklas Söderlund @ 2017-11-15 22:58 UTC (permalink / raw)
  To: Rob Herring
  Cc: Laurent Pinchart, Hans Verkuil, linux-media, linux-renesas-soc,
	tomoharu.fukawa.eb, Kieran Bingham, devicetree

Hi Rob,

Thanks for your feedback, much appreciated!

On 2017-11-15 14:02:26 -0600, Rob Herring wrote:
> On Sat, Nov 11, 2017 at 01:38:11AM +0100, Niklas Söderlund wrote:
> > Document the devicetree bindings for the CSI-2 inputs available on Gen3.
> > 
> > There is a need to add a custom property 'renesas,id' and to define
> > which CSI-2 input is described in which endpoint under the port@1 node.
> > This information is needed since there are a set of predefined routes
> > between each VIN and CSI-2 block. This routing table will be kept
> > inside the driver but in order for it to act on it it must know which
> > VIN and CSI-2 is which.
> > 
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > ---
> >  .../devicetree/bindings/media/rcar_vin.txt         | 116 ++++++++++++++++++---
> >  1 file changed, 104 insertions(+), 12 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
> > index 6e4ef8caf759e5d3..df1abd0fb20386f8 100644
> > --- a/Documentation/devicetree/bindings/media/rcar_vin.txt
> > +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
> > @@ -2,8 +2,12 @@ Renesas R-Car Video Input driver (rcar_vin)
> >  -------------------------------------------
> >  
> >  The rcar_vin device provides video input capabilities for the Renesas R-Car
> > -family of devices. The current blocks are always slaves and suppot one input
> > -channel which can be either RGB, YUYV or BT656.
> > +family of devices.
> > +
> > +Each VIN instance has a single parallel input that supports RGB and YUV video,
> > +with both external synchronization and BT.656 synchronization for the latter.
> > +Depending on the instance the VIN input is connected to external SoC pins, or
> > +on Gen3 to a CSI-2 receiver.
> >  
> >   - compatible: Must be one or more of the following
> >     - "renesas,vin-r8a7795" for the R8A7795 device
> > @@ -28,21 +32,38 @@ channel which can be either RGB, YUYV or BT656.
> >  Additionally, an alias named vinX will need to be created to specify
> >  which video input device this is.
> >  
> > -The per-board settings:
> > +The per-board settings Gen2:
> >   - port sub-node describing a single endpoint connected to the vin
> >     as described in video-interfaces.txt[1]. Only the first one will
> >     be considered as each vin interface has one input port.
> >  
> > -   These settings are used to work out video input format and widths
> > -   into the system.
> > +The per-board settings Gen3:
> > +
> > +Gen3 can support both a single connected parallel input source from
> > +external SoC pins (port0) and/or multiple parallel input sources from
> > +local SoC CSI-2 receivers (port1) depending on SoC.
> >  
> > +- renesas,id - ID number of the VIN, VINx in the documentation.
> 
> Why is this needed? We try to avoid indexes unless that's the only way a 
> device is addressed (and then we use reg).

This is unfortunately needed (or something similar) as there is a 
register in one VIN instance which controls the routing of the incoming 
CSI-2 video streams, not only to itself, but also to other VIN instances 
inside the same SoC.

To be more specific I will try to clarify this using the R-Car H3 as an 
example. On the H3 there are 8 instances of the capture hardware (VIN0 - 
VIN7) and 3 instances off CSI-2 receivers (CSI20, CSI40 and CSI41) which 
receives CSI-2 streams, split the possible multiple virtual channels 
(VC) encoded in CSI-2 streams and forwards it to the VIN's.

The problem is that VIN0 and VIN4 are different from the other VIN's, 
they have one register (CHSEL) which controls the limited number of 
possible routes of video streams between a CSI-2 + VC to a specific VIN.  
The CHSEL register in VIN0 controls the routing for VIN0-3 and the one 
in VIN4 controls VIN4-7 (the two subgroups are similar so lets only 
consider VIN0-3).

There are only a handful of routes possible and the kicker is that 
changing the CHSEL value in VIN0, directly reflects all routes for 
VIN0-VIN3 per this table:

CHSEL reg in VIN0:  0         1         2         3         4
Video sent to VIN0: CSI40/VC0 CSI20/VC0 CSI40/VC1 CSI40/VC0 CSI20/VC0
Video sent to VIN1: CSI20/VC0 CSI40/VC1 CSI40/VC0 CSI40/VC1 CSI20/VC1
Video sent to VIN2: CSI20/VC1 CSI40/VC0 CSI20/VC0 CSI40/VC2 CSI20/VC2
Video sent to VIN3: CSI40/VC1 CSI20/VC1 CSI20/VC1 CSI40/VC3 CSI20/VC3

So if CHSEL in VIN0 is set to 2 the following routes are active: VIN0: 
CSI40/VC1, VIN1: CSI40/VC0, VIN2: CSI20/VC0, CSI20/VC1. These routing 
tables are different for most SoCs in the R-Car Gen3 family, and are 
kept inside the driver code.

So the renesas,id properly is used so that the rcar-vin driver knows 
which of the driver instances corresponds to a specific VINx number from 
the documentation so that using the media device API the correct links 
can be added and that the routing table is enforced so a user can't try 
to activate a CSI-2 + VC to a VIN link which is not possible due to 
other routes already being active.

I agree that if possible I would like to not have the need for this 
property, but I can't think of another way on how to give this knowledge 
to the driver in a better way. I'm happy to try out other ideas :-)

Dose this explanation make sens to you?

-- 
Regards,
Niklas Söderlund

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v7 14/25] rcar-vin: add function to manipulate Gen3 CHSEL value
  2017-11-11  0:38 ` [PATCH v7 14/25] rcar-vin: add function to manipulate Gen3 CHSEL value Niklas Söderlund
@ 2017-11-17 11:22   ` Hans Verkuil
  0 siblings, 0 replies; 35+ messages in thread
From: Hans Verkuil @ 2017-11-17 11:22 UTC (permalink / raw)
  To: Niklas Söderlund, Laurent Pinchart, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham

On 11/11/17 01:38, Niklas Söderlund wrote:
> On Gen3 the CSI-2 routing is controlled by the VnCSI_IFMD register. One
> feature of this register is that it's only present in the VIN0 and VIN4
> instances. The register in VIN0 controls the routing for VIN0-3 and the
> register in VIN4 controls routing for VIN4-7.
> 
> To be able to control routing from a media device this function is need
> to control runtime PM for the subgroup master (VIN0 and VIN4). The
> subgroup master must be switched on before the register is manipulated,
> once the operation is complete it's safe to switch the master off and
> the new routing will still be in effect.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>

Regards,

	Hans

> ---
>  drivers/media/platform/rcar-vin/rcar-dma.c | 25 +++++++++++++++++++++++++
>  drivers/media/platform/rcar-vin/rcar-vin.h |  2 ++
>  2 files changed, 27 insertions(+)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
> index c4f8e81e88c99e28..463c656b9878be52 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -16,6 +16,7 @@
>  
>  #include <linux/delay.h>
>  #include <linux/interrupt.h>
> +#include <linux/pm_runtime.h>
>  
>  #include <media/videobuf2-dma-contig.h>
>  
> @@ -1228,3 +1229,27 @@ int rvin_dma_probe(struct rvin_dev *vin, int irq)
>  
>  	return ret;
>  }
> +
> +/* -----------------------------------------------------------------------------
> + * Gen3 CHSEL manipulation
> + */
> +
> +void rvin_set_chsel(struct rvin_dev *vin, u8 chsel)
> +{
> +	u32 ifmd, vnmc;
> +
> +	pm_runtime_get_sync(vin->dev);
> +
> +	/* Make register writes take effect immediately */
> +	vnmc = rvin_read(vin, VNMC_REG) & ~VNMC_VUP;
> +	rvin_write(vin, vnmc, VNMC_REG);
> +
> +	ifmd = VNCSI_IFMD_DES2 | VNCSI_IFMD_DES1 | VNCSI_IFMD_DES0 |
> +		VNCSI_IFMD_CSI_CHSEL(chsel);
> +
> +	rvin_write(vin, ifmd, VNCSI_IFMD_REG);
> +
> +	vin_dbg(vin, "Set IFMD 0x%x\n", ifmd);
> +
> +	pm_runtime_put(vin->dev);
> +}
> diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
> index 1f761518a6cc60b8..8a7c51724a90786c 100644
> --- a/drivers/media/platform/rcar-vin/rcar-vin.h
> +++ b/drivers/media/platform/rcar-vin/rcar-vin.h
> @@ -164,4 +164,6 @@ int rvin_reset_format(struct rvin_dev *vin);
>  
>  const struct rvin_video_format *rvin_format_from_pixel(u32 pixelformat);
>  
> +void rvin_set_chsel(struct rvin_dev *vin, u8 chsel);
> +
>  #endif
> 

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v7 20/25] rcar-vin: add chsel information to rvin_info
  2017-11-11  0:38 ` [PATCH v7 20/25] rcar-vin: add chsel information to rvin_info Niklas Söderlund
@ 2017-11-17 11:25   ` Hans Verkuil
  0 siblings, 0 replies; 35+ messages in thread
From: Hans Verkuil @ 2017-11-17 11:25 UTC (permalink / raw)
  To: Niklas Söderlund, Laurent Pinchart, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham

On 11/11/17 01:38, Niklas Söderlund wrote:
> Each Gen3 SoC has a limited set of predefined routing possibilities for
> which CSI-2 device and virtual channel can be routed to which VIN
> instance. Prepare to store this information in the struct rvin_info.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>

Regards,

	Hans

> ---
>  drivers/media/platform/rcar-vin/rcar-vin.h | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
> index a9bd570d6635fd47..41c81b8d9fb8e851 100644
> --- a/drivers/media/platform/rcar-vin/rcar-vin.h
> +++ b/drivers/media/platform/rcar-vin/rcar-vin.h
> @@ -35,6 +35,9 @@
>  /* Max number on VIN instances that can be in a system */
>  #define RCAR_VIN_NUM 8
>  
> +/* Max number of CHSEL values for any Gen3 SoC */
> +#define RCAR_CHSEL_MAX 6
> +
>  enum chip_id {
>  	RCAR_H1,
>  	RCAR_M1,
> @@ -91,6 +94,22 @@ struct rvin_graph_entity {
>  
>  struct rvin_group;
>  
> +/** struct rvin_group_chsel - Map a CSI-2 receiver and channel to a CHSEL value
> + * @csi:		VIN internal number for CSI-2 device
> + * @chan:		Output channel of the CSI-2 receiver. Each R-Car CSI-2
> + *			receiver has four output channels facing the VIN
> + *			devices, each channel can carry one CSI-2 Virtual
> + *			Channel (VC) and there are no correlation between
> + *			output channel number and CSI-2 VC. It's up to the
> + *			CSI-2 receiver driver to configure which VC is
> + *			outputted on which channel, the VIN devices only
> + *			cares about output channels.
> + */
> +struct rvin_group_chsel {
> +	enum rvin_csi_id csi;
> +	unsigned int chan;
> +};
> +
>  /**
>   * struct rvin_info - Information about the particular VIN implementation
>   * @chip:		type of VIN chip
> @@ -98,6 +117,9 @@ struct rvin_group;
>   *
>   * max_width:		max input width the VIN supports
>   * max_height:		max input height the VIN supports
> + *
> + * num_chsels:		number of possible chsel values for this VIN
> + * chsels:		routing table VIN <-> CSI-2 for the chsel values
>   */
>  struct rvin_info {
>  	enum chip_id chip;
> @@ -105,6 +127,9 @@ struct rvin_info {
>  
>  	unsigned int max_width;
>  	unsigned int max_height;
> +
> +	unsigned int num_chsels;
> +	struct rvin_group_chsel chsels[RCAR_VIN_NUM][RCAR_CHSEL_MAX];
>  };
>  
>  /**
> 

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v7 22/25] rcar-vin: add link notify for Gen3
  2017-11-11  0:38 ` [PATCH v7 22/25] rcar-vin: add link notify for Gen3 Niklas Söderlund
@ 2017-11-17 11:29   ` Hans Verkuil
  0 siblings, 0 replies; 35+ messages in thread
From: Hans Verkuil @ 2017-11-17 11:29 UTC (permalink / raw)
  To: Niklas Söderlund, Laurent Pinchart, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham

On 11/11/17 01:38, Niklas Söderlund wrote:
> Add the ability to process media device link change request. Link
> enabling is a bit complicated on Gen3, whether or not it's possible to
> enable a link depends on what other links already are enabled. On Gen3
> the 8 VINs are split into two subgroup's (VIN0-3 and VIN4-7) and from a
> routing perspective these two groups are independent of each other.
> Each subgroup's routing is controlled by the subgroup VIN master
> instance (VIN0 and VIN4).
> 
> There are a limited number of possible route setups available for each
> subgroup and the configuration of each setup is dictated by the
> hardware. On H3 for example there are 6 possible route setups for each
> subgroup to choose from.
> 
> This leads to the media device link notification code being rather large
> since it will find the best routing configuration to try and accommodate
> as many links as possible. When it's not possible to enable a new link
> due to hardware constrains the link_notifier callback will return
> -EMLINK.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>

Regards,

	Hans

> ---
>  drivers/media/platform/rcar-vin/rcar-core.c | 205 ++++++++++++++++++++++++++++
>  1 file changed, 205 insertions(+)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
> index 78a9766eb7114959..79b0334d8c563328 100644
> --- a/drivers/media/platform/rcar-vin/rcar-core.c
> +++ b/drivers/media/platform/rcar-vin/rcar-core.c
> @@ -27,6 +27,209 @@
>  
>  #include "rcar-vin.h"
>  
> +/* -----------------------------------------------------------------------------
> + * Media Controller link notification
> + */
> +
> +static unsigned int rvin_group_csi_pad_to_chan(unsigned int pad)
> +{
> +	/*
> +	 * The companion CSI-2 receiver driver (rcar-csi2) is known
> +	 * and we know it have one source pad (pad 0) and four sink
> +	 * pads (pad 1-4). So to translate a pad on the remote
> +	 * CSI-2 receiver to the VIN internal channel number simply
> +	 * subtract one from the pad number.
> +	 */
> +	return pad - 1;
> +}
> +
> +/* group lock should be held when calling this function */
> +static int rvin_group_entity_to_vin_num(struct rvin_group *group,
> +					struct media_entity *entity)
> +{
> +	struct video_device *vdev;
> +	int i;
> +
> +	if (!is_media_entity_v4l2_video_device(entity))
> +		return -ENODEV;
> +
> +	vdev = media_entity_to_video_device(entity);
> +
> +	for (i = 0; i < RCAR_VIN_NUM; i++) {
> +		if (!group->vin[i])
> +			continue;
> +
> +		if (&group->vin[i]->vdev == vdev)
> +			return i;
> +	}
> +
> +	return -ENODEV;
> +}
> +
> +/* group lock should be held when calling this function */
> +static int rvin_group_entity_to_csi_num(struct rvin_group *group,
> +					struct media_entity *entity)
> +{
> +	struct v4l2_subdev *sd;
> +	int i;
> +
> +	if (!is_media_entity_v4l2_subdev(entity))
> +		return -ENODEV;
> +
> +	sd = media_entity_to_v4l2_subdev(entity);
> +
> +	for (i = 0; i < RVIN_CSI_MAX; i++)
> +		if (group->csi[i].subdev == sd)
> +			return i;
> +
> +	return -ENODEV;
> +}
> +
> +/* group lock should be held when calling this function */
> +static void __rvin_group_build_link_list(struct rvin_group *group,
> +					 struct rvin_group_chsel *map,
> +					 int start, int len)
> +{
> +	struct media_pad *vin_pad, *remote_pad;
> +	unsigned int n;
> +
> +	for (n = 0; n < len; n++) {
> +		map[n].csi = -1;
> +		map[n].chan = -1;
> +
> +		if (!group->vin[start + n])
> +			continue;
> +
> +		vin_pad = &group->vin[start + n]->vdev.entity.pads[0];
> +
> +		remote_pad = media_entity_remote_pad(vin_pad);
> +		if (!remote_pad)
> +			continue;
> +
> +		map[n].csi =
> +			rvin_group_entity_to_csi_num(group, remote_pad->entity);
> +		map[n].chan = rvin_group_csi_pad_to_chan(remote_pad->index);
> +	}
> +}
> +
> +/* group lock should be held when calling this function */
> +static int __rvin_group_try_get_chsel(struct rvin_group *group,
> +				      struct rvin_group_chsel *map,
> +				      int start, int len)
> +{
> +	const struct rvin_group_chsel *sel;
> +	unsigned int i, n;
> +	int chsel;
> +
> +	for (i = 0; i < group->vin[start]->info->num_chsels; i++) {
> +		chsel = i;
> +		for (n = 0; n < len; n++) {
> +
> +			/* If the link is not active it's OK */
> +			if (map[n].csi == -1)
> +				continue;
> +
> +			/* Check if chsel matches requested link */
> +			sel = &group->vin[start]->info->chsels[start + n][i];
> +			if (map[n].csi != sel->csi ||
> +			    map[n].chan != sel->chan) {
> +				chsel = -1;
> +				break;
> +			}
> +		}
> +
> +		/* A chsel which satisfies the links has been found */
> +		if (chsel != -1)
> +			return chsel;
> +	}
> +
> +	/* No chsel can satisfy the requested links */
> +	return -1;
> +}
> +
> +/* group lock should be held when calling this function */
> +static bool rvin_group_in_use(struct rvin_group *group)
> +{
> +	struct media_entity *entity;
> +
> +	media_device_for_each_entity(entity, &group->mdev)
> +		if (entity->use_count)
> +			return true;
> +
> +	return false;
> +}
> +
> +static int rvin_group_link_notify(struct media_link *link, u32 flags,
> +				  unsigned int notification)
> +{
> +	struct rvin_group *group = container_of(link->graph_obj.mdev,
> +						struct rvin_group, mdev);
> +	struct rvin_group_chsel chsel_map[4];
> +	int vin_num, vin_master, csi_num, csi_chan;
> +	unsigned int chsel;
> +
> +	mutex_lock(&group->lock);
> +
> +	vin_num = rvin_group_entity_to_vin_num(group, link->sink->entity);
> +	csi_num = rvin_group_entity_to_csi_num(group, link->source->entity);
> +	csi_chan = rvin_group_csi_pad_to_chan(link->source->index);
> +
> +	/*
> +	 * Figure out which VIN node is the subgroup master.
> +	 *
> +	 * VIN0-3 are controlled by VIN0
> +	 * VIN4-7 are controlled by VIN4
> +	 */
> +	vin_master = vin_num < 4 ? 0 : 4;
> +
> +	/* If not all devices exist something is horribly wrong */
> +	if (vin_num < 0 || csi_num < 0 || !group->vin[vin_master])
> +		goto error;
> +
> +	/* Special checking only needed for links which are to be enabled */
> +	if (notification != MEDIA_DEV_NOTIFY_PRE_LINK_CH ||
> +	    !(flags & MEDIA_LNK_FL_ENABLED))
> +		goto out;
> +
> +	/* If any link in the group is in use, no new link can be enabled */
> +	if (rvin_group_in_use(group))
> +		goto error;
> +
> +	/* If the VIN already has an active link it's busy */
> +	if (media_entity_remote_pad(&link->sink->entity->pads[0]))
> +		goto error;
> +
> +	/* Build list of active links */
> +	__rvin_group_build_link_list(group, chsel_map, vin_master, 4);
> +
> +	/* Add the new proposed link */
> +	chsel_map[vin_num - vin_master].csi = csi_num;
> +	chsel_map[vin_num - vin_master].chan = csi_chan;
> +
> +	/* See if there is a chsel value which matches our link selection */
> +	chsel = __rvin_group_try_get_chsel(group, chsel_map, vin_master, 4);
> +
> +	/* No chsel can provide the requested links */
> +	if (chsel == -1)
> +		goto error;
> +
> +	/* Update chsel value at group master */
> +	rvin_set_chsel(group->vin[vin_master], chsel);
> +
> +out:
> +	mutex_unlock(&group->lock);
> +
> +	return v4l2_pipeline_link_notify(link, flags, notification);
> +error:
> +	mutex_unlock(&group->lock);
> +
> +	return -EMLINK;
> +}
> +
> +static const struct media_device_ops rvin_media_ops = {
> +	.link_notify = rvin_group_link_notify,
> +};
> +
>  /* -----------------------------------------------------------------------------
>   * Gen3 CSI2 Group Allocator
>   */
> @@ -147,6 +350,8 @@ static int rvin_group_allocate(struct rvin_dev *vin)
>  			sizeof(mdev->bus_info));
>  		media_device_init(mdev);
>  
> +		mdev->ops = &rvin_media_ops;
> +
>  		ret = media_device_register(mdev);
>  		if (ret) {
>  			vin_err(vin, "Failed to register media device\n");
> 

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v7 23/25] rcar-vin: extend {start,stop}_streaming to work with media controller
  2017-11-11  0:38 ` [PATCH v7 23/25] rcar-vin: extend {start,stop}_streaming to work with media controller Niklas Söderlund
@ 2017-11-17 11:31   ` Hans Verkuil
  0 siblings, 0 replies; 35+ messages in thread
From: Hans Verkuil @ 2017-11-17 11:31 UTC (permalink / raw)
  To: Niklas Söderlund, Laurent Pinchart, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham

On 11/11/17 01:38, Niklas Söderlund wrote:
> The procedure to start or stop streaming using the non-MC single
> subdevice and the MC graph and multiple subdevices are quite different.
> Create a new function to abstract which method is used based on which
> mode the driver is running in and add logic to start the MC graph.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

One tiny typo in a comment, see below. After fixing that you can add my:

Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>

Regards,

	Hans

> ---
>  drivers/media/platform/rcar-vin/rcar-dma.c | 113 +++++++++++++++++++++++++++--
>  1 file changed, 106 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
> index fe1319eb4c5df02d..b16b892a4de876bb 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -1087,15 +1087,116 @@ static void rvin_buffer_queue(struct vb2_buffer *vb)
>  	spin_unlock_irqrestore(&vin->qlock, flags);
>  }
>  
> +static int rvin_set_stream(struct rvin_dev *vin, int on)
> +{
> +	struct v4l2_subdev_format fmt = {
> +		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
> +	};
> +	struct media_pipeline *pipe;
> +	struct  v4l2_subdev *sd;
> +	struct media_pad *pad;
> +	int ret;
> +
> +	/* No media controller used, simply pass operation to subdevice */
> +	if (!vin->info->use_mc) {
> +		ret = v4l2_subdev_call(vin->digital->subdev, video, s_stream,
> +				       on);
> +
> +		return ret == -ENOIOCTLCMD ? 0 : ret;
> +	}
> +
> +	pad = media_entity_remote_pad(&vin->pad);
> +	if (!pad)
> +		return -EPIPE;
> +
> +	sd = media_entity_to_v4l2_subdev(pad->entity);
> +	if (!sd)
> +		return -EPIPE;
> +
> +	if (!on) {
> +		media_pipeline_stop(&vin->vdev.entity);
> +		ret = v4l2_subdev_call(sd, video, s_stream, 0);
> +		return 0;
> +	}
> +
> +	fmt.pad = pad->index;
> +	if (v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt))
> +		return -EPIPE;
> +
> +	switch (fmt.format.code) {
> +	case MEDIA_BUS_FMT_YUYV8_1X16:
> +	case MEDIA_BUS_FMT_UYVY8_2X8:
> +	case MEDIA_BUS_FMT_UYVY10_2X10:
> +	case MEDIA_BUS_FMT_RGB888_1X24:
> +		vin->code = fmt.format.code;
> +		break;
> +	default:
> +		return -EPIPE;
> +	}
> +
> +	switch (fmt.format.field) {
> +	case V4L2_FIELD_TOP:
> +	case V4L2_FIELD_BOTTOM:
> +	case V4L2_FIELD_NONE:
> +	case V4L2_FIELD_INTERLACED_TB:
> +	case V4L2_FIELD_INTERLACED_BT:
> +	case V4L2_FIELD_INTERLACED:
> +	case V4L2_FIELD_SEQ_TB:
> +	case V4L2_FIELD_SEQ_BT:
> +		/* Supported nativly */

nativly -> natively

> +		break;
> +	case V4L2_FIELD_ALTERNATE:
> +		switch (vin->format.field) {
> +		case V4L2_FIELD_TOP:
> +		case V4L2_FIELD_BOTTOM:
> +		case V4L2_FIELD_NONE:
> +			break;
> +		case V4L2_FIELD_INTERLACED_TB:
> +		case V4L2_FIELD_INTERLACED_BT:
> +		case V4L2_FIELD_INTERLACED:
> +		case V4L2_FIELD_SEQ_TB:
> +		case V4L2_FIELD_SEQ_BT:
> +			/* Use VIN hardware to combine the two fields */
> +			fmt.format.height *= 2;
> +			break;
> +		default:
> +			return -EPIPE;
> +		}
> +		break;
> +	default:
> +		return -EPIPE;
> +	}
> +
> +	if (fmt.format.width != vin->format.width ||
> +	    fmt.format.height != vin->format.height)
> +		return -EPIPE;
> +
> +	pipe = sd->entity.pipe ? sd->entity.pipe : &vin->vdev.pipe;
> +	if (media_pipeline_start(&vin->vdev.entity, pipe))
> +		return -EPIPE;
> +
> +	ret = v4l2_subdev_call(sd, video, s_stream, 1);
> +	if (ret == -ENOIOCTLCMD)
> +		ret = 0;
> +	if (ret)
> +		media_pipeline_stop(&vin->vdev.entity);
> +
> +	return ret;
> +}
> +
>  static int rvin_start_streaming(struct vb2_queue *vq, unsigned int count)
>  {
>  	struct rvin_dev *vin = vb2_get_drv_priv(vq);
> -	struct v4l2_subdev *sd;
>  	unsigned long flags;
>  	int ret;
>  
> -	sd = vin_to_source(vin);
> -	v4l2_subdev_call(sd, video, s_stream, 1);
> +	ret = rvin_set_stream(vin, 1);
> +	if (ret) {
> +		spin_lock_irqsave(&vin->qlock, flags);
> +		return_all_buffers(vin, VB2_BUF_STATE_QUEUED);
> +		spin_unlock_irqrestore(&vin->qlock, flags);
> +		return ret;
> +	}
>  
>  	spin_lock_irqsave(&vin->qlock, flags);
>  
> @@ -1104,7 +1205,7 @@ static int rvin_start_streaming(struct vb2_queue *vq, unsigned int count)
>  	ret = rvin_capture_start(vin);
>  	if (ret) {
>  		return_all_buffers(vin, VB2_BUF_STATE_QUEUED);
> -		v4l2_subdev_call(sd, video, s_stream, 0);
> +		rvin_set_stream(vin, 0);
>  	}
>  
>  	spin_unlock_irqrestore(&vin->qlock, flags);
> @@ -1115,7 +1216,6 @@ static int rvin_start_streaming(struct vb2_queue *vq, unsigned int count)
>  static void rvin_stop_streaming(struct vb2_queue *vq)
>  {
>  	struct rvin_dev *vin = vb2_get_drv_priv(vq);
> -	struct v4l2_subdev *sd;
>  	unsigned long flags;
>  	int retries = 0;
>  
> @@ -1154,8 +1254,7 @@ static void rvin_stop_streaming(struct vb2_queue *vq)
>  
>  	spin_unlock_irqrestore(&vin->qlock, flags);
>  
> -	sd = vin_to_source(vin);
> -	v4l2_subdev_call(sd, video, s_stream, 0);
> +	rvin_set_stream(vin, 0);
>  
>  	/* disable interrupts */
>  	rvin_disable_interrupts(vin);
> 

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v7 02/25] rcar-vin: register the video device at probe time
  2017-11-11  0:38 ` [PATCH v7 02/25] rcar-vin: register the video device at probe time Niklas Söderlund
@ 2017-11-17 11:39   ` Hans Verkuil
  0 siblings, 0 replies; 35+ messages in thread
From: Hans Verkuil @ 2017-11-17 11:39 UTC (permalink / raw)
  To: Niklas Söderlund, Laurent Pinchart, linux-media
  Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham

On 11/11/17 01:38, Niklas Söderlund wrote:
> The driver registers the video device from the async complete callback
> and unregistered in the async unbind callback. This creates problems if
> if the subdevice is bound, unbound and later rebound. The second time

"unbound and later rebound": that's a manual operation via /sys bind/unbind?

I remain unhappy about this patch. It's a workaround for a more basic problem
IMHO.

Can you move this patch to the end of the series? That way I can decide later
whether to merge it or not without blocking the rest of the series.

Other than this patch the only blocking patch is the bindings patch which hasn't
got an Ack yet.

Regards,

	Hans

> video_register_device() is called it fails:
> 
>    kobject (eb3be918): tried to init an initialized object, something is seriously wrong.
> 
> To prevent this register the video device at probe time and don't allow
> user-space to open the video device if the subdevice is not bound yet.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
>  drivers/media/platform/rcar-vin/rcar-core.c | 124 +++++++++++++++++++---------
>  drivers/media/platform/rcar-vin/rcar-v4l2.c |  47 ++---------
>  drivers/media/platform/rcar-vin/rcar-vin.h  |   5 +-
>  3 files changed, 95 insertions(+), 81 deletions(-)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
> index 108d776f32651b27..856df3e407c05d97 100644
> --- a/drivers/media/platform/rcar-vin/rcar-core.c
> +++ b/drivers/media/platform/rcar-vin/rcar-core.c
> @@ -46,54 +46,18 @@ static int rvin_find_pad(struct v4l2_subdev *sd, int direction)
>  	return -EINVAL;
>  }
>  
> -static bool rvin_mbus_supported(struct rvin_graph_entity *entity)
> -{
> -	struct v4l2_subdev *sd = entity->subdev;
> -	struct v4l2_subdev_mbus_code_enum code = {
> -		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
> -	};
> -
> -	code.index = 0;
> -	code.pad = entity->source_pad;
> -	while (!v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code)) {
> -		code.index++;
> -		switch (code.code) {
> -		case MEDIA_BUS_FMT_YUYV8_1X16:
> -		case MEDIA_BUS_FMT_UYVY8_2X8:
> -		case MEDIA_BUS_FMT_UYVY10_2X10:
> -		case MEDIA_BUS_FMT_RGB888_1X24:
> -			entity->code = code.code;
> -			return true;
> -		default:
> -			break;
> -		}
> -	}
> -
> -	return false;
> -}
> -
>  static int rvin_digital_notify_complete(struct v4l2_async_notifier *notifier)
>  {
>  	struct rvin_dev *vin = notifier_to_vin(notifier);
>  	int ret;
>  
> -	/* Verify subdevices mbus format */
> -	if (!rvin_mbus_supported(vin->digital)) {
> -		vin_err(vin, "Unsupported media bus format for %s\n",
> -			vin->digital->subdev->name);
> -		return -EINVAL;
> -	}
> -
> -	vin_dbg(vin, "Found media bus format for %s: %d\n",
> -		vin->digital->subdev->name, vin->digital->code);
> -
>  	ret = v4l2_device_register_subdev_nodes(&vin->v4l2_dev);
>  	if (ret < 0) {
>  		vin_err(vin, "Failed to register subdev nodes\n");
>  		return ret;
>  	}
>  
> -	return rvin_v4l2_probe(vin);
> +	return 0;
>  }
>  
>  static void rvin_digital_notify_unbind(struct v4l2_async_notifier *notifier,
> @@ -103,8 +67,15 @@ static void rvin_digital_notify_unbind(struct v4l2_async_notifier *notifier,
>  	struct rvin_dev *vin = notifier_to_vin(notifier);
>  
>  	vin_dbg(vin, "unbind digital subdev %s\n", subdev->name);
> -	rvin_v4l2_remove(vin);
> +
> +	mutex_lock(&vin->lock);
> +
> +	vin->vdev.ctrl_handler = NULL;
> +	v4l2_ctrl_handler_free(&vin->ctrl_handler);
> +
>  	vin->digital->subdev = NULL;
> +
> +	mutex_unlock(&vin->lock);
>  }
>  
>  static int rvin_digital_notify_bound(struct v4l2_async_notifier *notifier,
> @@ -112,12 +83,14 @@ static int rvin_digital_notify_bound(struct v4l2_async_notifier *notifier,
>  				     struct v4l2_async_subdev *asd)
>  {
>  	struct rvin_dev *vin = notifier_to_vin(notifier);
> +	struct v4l2_subdev_mbus_code_enum code = {
> +		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
> +	};
>  	int ret;
>  
>  	v4l2_set_subdev_hostdata(subdev, vin);
>  
>  	/* Find source and sink pad of remote subdevice */
> -
>  	ret = rvin_find_pad(subdev, MEDIA_PAD_FL_SOURCE);
>  	if (ret < 0)
>  		return ret;
> @@ -126,21 +99,82 @@ static int rvin_digital_notify_bound(struct v4l2_async_notifier *notifier,
>  	ret = rvin_find_pad(subdev, MEDIA_PAD_FL_SINK);
>  	vin->digital->sink_pad = ret < 0 ? 0 : ret;
>  
> +	/* Find compatible subdevices mbus format */
> +	vin->digital->code = 0;
> +	code.index = 0;
> +	code.pad = vin->digital->source_pad;
> +	while (!vin->digital->code &&
> +	       !v4l2_subdev_call(subdev, pad, enum_mbus_code, NULL, &code)) {
> +		code.index++;
> +		switch (code.code) {
> +		case MEDIA_BUS_FMT_YUYV8_1X16:
> +		case MEDIA_BUS_FMT_UYVY8_2X8:
> +		case MEDIA_BUS_FMT_UYVY10_2X10:
> +		case MEDIA_BUS_FMT_RGB888_1X24:
> +			vin->digital->code = code.code;
> +			vin_dbg(vin, "Found media bus format for %s: %d\n",
> +				subdev->name, vin->digital->code);
> +			break;
> +		default:
> +			break;
> +		}
> +	}
> +
> +	if (!vin->digital->code) {
> +		vin_err(vin, "Unsupported media bus format for %s\n",
> +			subdev->name);
> +		return -EINVAL;
> +	}
> +
> +	/* Read tvnorms */
> +	ret = v4l2_subdev_call(subdev, video, g_tvnorms, &vin->vdev.tvnorms);
> +	if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
> +		return ret;
> +
> +	/* Lock as to not race with open */
> +	mutex_lock(&vin->lock);
> +
> +	/* Add the controls */
> +	ret = v4l2_ctrl_handler_init(&vin->ctrl_handler, 16);
> +	if (ret < 0)
> +		goto err;
> +
> +	ret = v4l2_ctrl_add_handler(&vin->ctrl_handler, subdev->ctrl_handler,
> +				    NULL);
> +	if (ret < 0)
> +		goto err_ctrl;
> +
> +	vin->vdev.ctrl_handler = &vin->ctrl_handler;
> +
>  	vin->digital->subdev = subdev;
>  
> +	ret = rvin_reset_format(vin);
> +	if (ret)
> +		goto err_subdev;
> +
> +	mutex_unlock(&vin->lock);
> +
>  	vin_dbg(vin, "bound subdev %s source pad: %u sink pad: %u\n",
>  		subdev->name, vin->digital->source_pad,
>  		vin->digital->sink_pad);
>  
>  	return 0;
> +err_subdev:
> +	vin->digital->subdev = NULL;
> +	vin->vdev.ctrl_handler = NULL;
> +err_ctrl:
> +	v4l2_ctrl_handler_free(&vin->ctrl_handler);
> +err:
> +	mutex_unlock(&vin->lock);
> +	return ret;
>  }
> +
>  static const struct v4l2_async_notifier_operations rvin_digital_notify_ops = {
>  	.bound = rvin_digital_notify_bound,
>  	.unbind = rvin_digital_notify_unbind,
>  	.complete = rvin_digital_notify_complete,
>  };
>  
> -
>  static int rvin_digital_parse_v4l2(struct device *dev,
>  				   struct v4l2_fwnode_endpoint *vep,
>  				   struct v4l2_async_subdev *asd)
> @@ -189,7 +223,12 @@ static int rvin_digital_graph_init(struct rvin_dev *vin)
>  	vin_dbg(vin, "Found digital subdevice %pOF\n",
>  		to_of_node(vin->digital->asd.match.fwnode.fwnode));
>  
> +	ret = rvin_v4l2_register(vin);
> +	if (ret)
> +		return ret;
> +
>  	vin->notifier.ops = &rvin_digital_notify_ops;
> +
>  	ret = v4l2_async_notifier_register(&vin->v4l2_dev, &vin->notifier);
>  	if (ret < 0) {
>  		vin_err(vin, "Notifier registration failed\n");
> @@ -275,6 +314,11 @@ static int rcar_vin_remove(struct platform_device *pdev)
>  	v4l2_async_notifier_unregister(&vin->notifier);
>  	v4l2_async_notifier_cleanup(&vin->notifier);
>  
> +	/* Checks internaly if handlers have been init or not */
> +	v4l2_ctrl_handler_free(&vin->ctrl_handler);
> +
> +	rvin_v4l2_unregister(vin);
> +
>  	rvin_dma_remove(vin);
>  
>  	return 0;
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> index b479b882da12f62d..33dd0ec0b82e57dc 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -103,7 +103,7 @@ static void rvin_reset_crop_compose(struct rvin_dev *vin)
>  	vin->compose.height = vin->format.height;
>  }
>  
> -static int rvin_reset_format(struct rvin_dev *vin)
> +int rvin_reset_format(struct rvin_dev *vin)
>  {
>  	struct v4l2_subdev_format fmt = {
>  		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
> @@ -781,6 +781,11 @@ static int rvin_open(struct file *file)
>  
>  	mutex_lock(&vin->lock);
>  
> +	if (!vin->digital->subdev) {
> +		ret = -ENODEV;
> +		goto unlock;
> +	}
> +
>  	file->private_data = vin;
>  
>  	ret = v4l2_fh_open(file);
> @@ -839,14 +844,11 @@ static const struct v4l2_file_operations rvin_fops = {
>  	.read		= vb2_fop_read,
>  };
>  
> -void rvin_v4l2_remove(struct rvin_dev *vin)
> +void rvin_v4l2_unregister(struct rvin_dev *vin)
>  {
>  	v4l2_info(&vin->v4l2_dev, "Removing %s\n",
>  		  video_device_node_name(&vin->vdev));
>  
> -	/* Checks internaly if handlers have been init or not */
> -	v4l2_ctrl_handler_free(&vin->ctrl_handler);
> -
>  	/* Checks internaly if vdev have been init or not */
>  	video_unregister_device(&vin->vdev);
>  }
> @@ -866,44 +868,13 @@ static void rvin_notify(struct v4l2_subdev *sd,
>  	}
>  }
>  
> -int rvin_v4l2_probe(struct rvin_dev *vin)
> +int rvin_v4l2_register(struct rvin_dev *vin)
>  {
>  	struct video_device *vdev = &vin->vdev;
> -	struct v4l2_subdev *sd = vin_to_source(vin);
>  	int ret;
>  
> -	v4l2_set_subdev_hostdata(sd, vin);
> -
>  	vin->v4l2_dev.notify = rvin_notify;
>  
> -	ret = v4l2_subdev_call(sd, video, g_tvnorms, &vin->vdev.tvnorms);
> -	if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
> -		return ret;
> -
> -	if (vin->vdev.tvnorms == 0) {
> -		/* Disable the STD API if there are no tvnorms defined */
> -		v4l2_disable_ioctl(&vin->vdev, VIDIOC_G_STD);
> -		v4l2_disable_ioctl(&vin->vdev, VIDIOC_S_STD);
> -		v4l2_disable_ioctl(&vin->vdev, VIDIOC_QUERYSTD);
> -		v4l2_disable_ioctl(&vin->vdev, VIDIOC_ENUMSTD);
> -	}
> -
> -	/* Add the controls */
> -	/*
> -	 * Currently the subdev with the largest number of controls (13) is
> -	 * ov6550. So let's pick 16 as a hint for the control handler. Note
> -	 * that this is a hint only: too large and you waste some memory, too
> -	 * small and there is a (very) small performance hit when looking up
> -	 * controls in the internal hash.
> -	 */
> -	ret = v4l2_ctrl_handler_init(&vin->ctrl_handler, 16);
> -	if (ret < 0)
> -		return ret;
> -
> -	ret = v4l2_ctrl_add_handler(&vin->ctrl_handler, sd->ctrl_handler, NULL);
> -	if (ret < 0)
> -		return ret;
> -
>  	/* video node */
>  	vdev->fops = &rvin_fops;
>  	vdev->v4l2_dev = &vin->v4l2_dev;
> @@ -912,12 +883,10 @@ int rvin_v4l2_probe(struct rvin_dev *vin)
>  	vdev->release = video_device_release_empty;
>  	vdev->ioctl_ops = &rvin_ioctl_ops;
>  	vdev->lock = &vin->lock;
> -	vdev->ctrl_handler = &vin->ctrl_handler;
>  	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
>  		V4L2_CAP_READWRITE;
>  
>  	vin->format.pixelformat	= RVIN_DEFAULT_FORMAT;
> -	rvin_reset_format(vin);
>  
>  	ret = video_register_device(&vin->vdev, VFL_TYPE_GRABBER, -1);
>  	if (ret) {
> diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
> index 5382078143fb3869..ab48cdf09889982e 100644
> --- a/drivers/media/platform/rcar-vin/rcar-vin.h
> +++ b/drivers/media/platform/rcar-vin/rcar-vin.h
> @@ -156,8 +156,9 @@ struct rvin_dev {
>  int rvin_dma_probe(struct rvin_dev *vin, int irq);
>  void rvin_dma_remove(struct rvin_dev *vin);
>  
> -int rvin_v4l2_probe(struct rvin_dev *vin);
> -void rvin_v4l2_remove(struct rvin_dev *vin);
> +int rvin_v4l2_register(struct rvin_dev *vin);
> +void rvin_v4l2_unregister(struct rvin_dev *vin);
> +int rvin_reset_format(struct rvin_dev *vin);
>  
>  const struct rvin_video_format *rvin_format_from_pixel(u32 pixelformat);
>  
> 

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v7 01/25] rcar-vin: add Gen3 devicetree bindings documentation
  2017-11-15 22:58     ` Niklas Söderlund
@ 2017-11-17 13:41       ` Rob Herring
  0 siblings, 0 replies; 35+ messages in thread
From: Rob Herring @ 2017-11-17 13:41 UTC (permalink / raw)
  To: Niklas Söderlund
  Cc: Laurent Pinchart, Hans Verkuil, linux-media,
	open list:MEDIA DRIVERS FOR RENESAS - FCP, tomoharu.fukawa.eb,
	Kieran Bingham, devicetree

On Wed, Nov 15, 2017 at 4:58 PM, Niklas Söderlund
<niklas.soderlund@ragnatech.se> wrote:
> Hi Rob,
>
> Thanks for your feedback, much appreciated!
>
> On 2017-11-15 14:02:26 -0600, Rob Herring wrote:
>> On Sat, Nov 11, 2017 at 01:38:11AM +0100, Niklas Söderlund wrote:
>> > Document the devicetree bindings for the CSI-2 inputs available on Gen3.
>> >
>> > There is a need to add a custom property 'renesas,id' and to define
>> > which CSI-2 input is described in which endpoint under the port@1 node.
>> > This information is needed since there are a set of predefined routes
>> > between each VIN and CSI-2 block. This routing table will be kept
>> > inside the driver but in order for it to act on it it must know which
>> > VIN and CSI-2 is which.
>> >
>> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
>> > ---
>> >  .../devicetree/bindings/media/rcar_vin.txt         | 116 ++++++++++++++++++---
>> >  1 file changed, 104 insertions(+), 12 deletions(-)
>> >
>> > diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
>> > index 6e4ef8caf759e5d3..df1abd0fb20386f8 100644
>> > --- a/Documentation/devicetree/bindings/media/rcar_vin.txt
>> > +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
>> > @@ -2,8 +2,12 @@ Renesas R-Car Video Input driver (rcar_vin)
>> >  -------------------------------------------
>> >
>> >  The rcar_vin device provides video input capabilities for the Renesas R-Car
>> > -family of devices. The current blocks are always slaves and suppot one input
>> > -channel which can be either RGB, YUYV or BT656.
>> > +family of devices.
>> > +
>> > +Each VIN instance has a single parallel input that supports RGB and YUV video,
>> > +with both external synchronization and BT.656 synchronization for the latter.
>> > +Depending on the instance the VIN input is connected to external SoC pins, or
>> > +on Gen3 to a CSI-2 receiver.
>> >
>> >   - compatible: Must be one or more of the following
>> >     - "renesas,vin-r8a7795" for the R8A7795 device
>> > @@ -28,21 +32,38 @@ channel which can be either RGB, YUYV or BT656.
>> >  Additionally, an alias named vinX will need to be created to specify
>> >  which video input device this is.
>> >
>> > -The per-board settings:
>> > +The per-board settings Gen2:
>> >   - port sub-node describing a single endpoint connected to the vin
>> >     as described in video-interfaces.txt[1]. Only the first one will
>> >     be considered as each vin interface has one input port.
>> >
>> > -   These settings are used to work out video input format and widths
>> > -   into the system.
>> > +The per-board settings Gen3:
>> > +
>> > +Gen3 can support both a single connected parallel input source from
>> > +external SoC pins (port0) and/or multiple parallel input sources from
>> > +local SoC CSI-2 receivers (port1) depending on SoC.
>> >
>> > +- renesas,id - ID number of the VIN, VINx in the documentation.
>>
>> Why is this needed? We try to avoid indexes unless that's the only way a
>> device is addressed (and then we use reg).
>
> This is unfortunately needed (or something similar) as there is a
> register in one VIN instance which controls the routing of the incoming
> CSI-2 video streams, not only to itself, but also to other VIN instances
> inside the same SoC.
>
> To be more specific I will try to clarify this using the R-Car H3 as an
> example. On the H3 there are 8 instances of the capture hardware (VIN0 -
> VIN7) and 3 instances off CSI-2 receivers (CSI20, CSI40 and CSI41) which
> receives CSI-2 streams, split the possible multiple virtual channels
> (VC) encoded in CSI-2 streams and forwards it to the VIN's.
>
> The problem is that VIN0 and VIN4 are different from the other VIN's,
> they have one register (CHSEL) which controls the limited number of
> possible routes of video streams between a CSI-2 + VC to a specific VIN.
> The CHSEL register in VIN0 controls the routing for VIN0-3 and the one
> in VIN4 controls VIN4-7 (the two subgroups are similar so lets only
> consider VIN0-3).
>
> There are only a handful of routes possible and the kicker is that
> changing the CHSEL value in VIN0, directly reflects all routes for
> VIN0-VIN3 per this table:
>
> CHSEL reg in VIN0:  0         1         2         3         4
> Video sent to VIN0: CSI40/VC0 CSI20/VC0 CSI40/VC1 CSI40/VC0 CSI20/VC0
> Video sent to VIN1: CSI20/VC0 CSI40/VC1 CSI40/VC0 CSI40/VC1 CSI20/VC1
> Video sent to VIN2: CSI20/VC1 CSI40/VC0 CSI20/VC0 CSI40/VC2 CSI20/VC2
> Video sent to VIN3: CSI40/VC1 CSI20/VC1 CSI20/VC1 CSI40/VC3 CSI20/VC3
>
> So if CHSEL in VIN0 is set to 2 the following routes are active: VIN0:
> CSI40/VC1, VIN1: CSI40/VC0, VIN2: CSI20/VC0, CSI20/VC1. These routing
> tables are different for most SoCs in the R-Car Gen3 family, and are
> kept inside the driver code.
>
> So the renesas,id properly is used so that the rcar-vin driver knows
> which of the driver instances corresponds to a specific VINx number from
> the documentation so that using the media device API the correct links
> can be added and that the routing table is enforced so a user can't try
> to activate a CSI-2 + VC to a VIN link which is not possible due to
> other routes already being active.
>
> I agree that if possible I would like to not have the need for this
> property, but I can't think of another way on how to give this knowledge
> to the driver in a better way. I'm happy to try out other ideas :-)
>
> Dose this explanation make sens to you?

Yes. Thank you. It would be could to summarize this in the binding and
perhaps capture all of this information in the driver if you haven't
already.

Acked-by: Rob Herring <robh@kernel.org>

Rob

^ permalink raw reply	[flat|nested] 35+ messages in thread

end of thread, other threads:[~2017-11-17 13:41 UTC | newest]

Thread overview: 35+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-11-11  0:38 [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 01/25] rcar-vin: add Gen3 devicetree bindings documentation Niklas Söderlund
2017-11-15 20:02   ` Rob Herring
2017-11-15 22:58     ` Niklas Söderlund
2017-11-17 13:41       ` Rob Herring
2017-11-11  0:38 ` [PATCH v7 02/25] rcar-vin: register the video device at probe time Niklas Söderlund
2017-11-17 11:39   ` Hans Verkuil
2017-11-11  0:38 ` [PATCH v7 03/25] rcar-vin: move chip information to own struct Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 04/25] rcar-vin: move max width and height information to chip information Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 05/25] rcar-vin: change name of video device Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 06/25] rcar-vin: move functions regarding scaling Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 07/25] rcar-vin: all Gen2 boards can scale simplify logic Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 08/25] rcar-vin: do not reset crop and compose when setting format Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 09/25] rcar-vin: do not allow changing scaling and composing while streaming Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 10/25] rcar-vin: read subdevice format for crop only when needed Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 11/25] rcar-vin: fix handling of single field frames (top, bottom and alternate fields) Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 12/25] rcar-vin: move media bus configuration to struct rvin_info Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 13/25] rcar-vin: enable Gen3 hardware configuration Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 14/25] rcar-vin: add function to manipulate Gen3 CHSEL value Niklas Söderlund
2017-11-17 11:22   ` Hans Verkuil
2017-11-11  0:38 ` [PATCH v7 15/25] rcar-vin: add flag to switch to media controller mode Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 16/25] rcar-vin: break out format alignment and checking Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 17/25] rcar-vin: use different v4l2 operations in media controller mode Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 18/25] rcar-vin: prepare for media controller mode initialization Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 19/25] rcar-vin: add group allocator functions Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 20/25] rcar-vin: add chsel information to rvin_info Niklas Söderlund
2017-11-17 11:25   ` Hans Verkuil
2017-11-11  0:38 ` [PATCH v7 21/25] rcar-vin: parse Gen3 OF and setup media graph Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 22/25] rcar-vin: add link notify for Gen3 Niklas Söderlund
2017-11-17 11:29   ` Hans Verkuil
2017-11-11  0:38 ` [PATCH v7 23/25] rcar-vin: extend {start,stop}_streaming to work with media controller Niklas Söderlund
2017-11-17 11:31   ` Hans Verkuil
2017-11-11  0:38 ` [PATCH v7 24/25] rcar-vin: enable support for r8a7795 Niklas Söderlund
2017-11-11  0:38 ` [PATCH v7 25/25] rcar-vin: enable support for r8a7796 Niklas Söderlund
2017-11-13  8:42   ` Geert Uytterhoeven

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).