* [PATCH] media: hantro: Support H264 profile control @ 2019-11-22 5:16 Hirokazu Honda 2019-11-22 15:09 ` Nicolas Dufresne 0 siblings, 1 reply; 11+ messages in thread From: Hirokazu Honda @ 2019-11-22 5:16 UTC (permalink / raw) To: ezequiel, mchehab, gregkh, linux-media, devel, linux-kernel, tfiga Cc: Hirokazu Honda The Hantro G1 decoder supports H.264 profiles from Baseline to High, with the exception of the Extended profile. Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE control, so that the applications can query the driver for the list of supported profiles. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> --- drivers/staging/media/hantro/hantro_drv.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c index 6d9d41170832..9387619235d8 100644 --- a/drivers/staging/media/hantro/hantro_drv.c +++ b/drivers/staging/media/hantro/hantro_drv.c @@ -355,6 +355,16 @@ static const struct hantro_ctrl controls[] = { .def = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, .max = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, }, + }, { + .codec = HANTRO_H264_DECODER, + .cfg = { + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE, + .min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, + .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, + .menu_skip_mask = + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED), + .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN, + } }, { }, }; -- 2.24.0.432.g9d3f5f5b63-goog ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH] media: hantro: Support H264 profile control 2019-11-22 5:16 [PATCH] media: hantro: Support H264 profile control Hirokazu Honda @ 2019-11-22 15:09 ` Nicolas Dufresne 2019-11-22 16:00 ` Tomasz Figa 0 siblings, 1 reply; 11+ messages in thread From: Nicolas Dufresne @ 2019-11-22 15:09 UTC (permalink / raw) To: Hirokazu Honda, ezequiel, mchehab, gregkh, linux-media, devel, linux-kernel, tfiga Le vendredi 22 novembre 2019 à 14:16 +0900, Hirokazu Honda a écrit : > The Hantro G1 decoder supports H.264 profiles from Baseline to High, with > the exception of the Extended profile. > > Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE control, so that the > applications can query the driver for the list of supported profiles. Thanks for this patch. Do you think we could also add the LEVEL control so the profile/level enumeration becomes complete ? I'm thinking it would be nice if the v4l2 compliance test make sure that codecs do implement these controls (both stateful and stateless), it's essential for stack with software fallback, or multiple capable codec hardware but with different capabilities. > > Signed-off-by: Hirokazu Honda <hiroh@chromium.org> > --- > drivers/staging/media/hantro/hantro_drv.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c > index 6d9d41170832..9387619235d8 100644 > --- a/drivers/staging/media/hantro/hantro_drv.c > +++ b/drivers/staging/media/hantro/hantro_drv.c > @@ -355,6 +355,16 @@ static const struct hantro_ctrl controls[] = { > .def = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > .max = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > }, > + }, { > + .codec = HANTRO_H264_DECODER, > + .cfg = { > + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE, > + .min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, > + .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, > + .menu_skip_mask = > + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED), > + .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN, > + } > }, { > }, > }; ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] media: hantro: Support H264 profile control 2019-11-22 15:09 ` Nicolas Dufresne @ 2019-11-22 16:00 ` Tomasz Figa 2019-11-22 16:52 ` Nicolas Dufresne 0 siblings, 1 reply; 11+ messages in thread From: Tomasz Figa @ 2019-11-22 16:00 UTC (permalink / raw) To: Nicolas Dufresne Cc: Hirokazu Honda, Ezequiel Garcia, Mauro Carvalho Chehab, Greg KH, Linux Media Mailing List, devel, Linux Kernel Mailing List On Sat, Nov 23, 2019 at 12:09 AM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > > Le vendredi 22 novembre 2019 à 14:16 +0900, Hirokazu Honda a écrit : > > The Hantro G1 decoder supports H.264 profiles from Baseline to High, with > > the exception of the Extended profile. > > > > Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE control, so that the > > applications can query the driver for the list of supported profiles. > > Thanks for this patch. Do you think we could also add the LEVEL control > so the profile/level enumeration becomes complete ? > > I'm thinking it would be nice if the v4l2 compliance test make sure > that codecs do implement these controls (both stateful and stateless), > it's essential for stack with software fallback, or multiple capable > codec hardware but with different capabilities. > Level is a difficult story, because it also specifies the number of macroblocks per second, but for decoders like this the number of macroblocks per second it can handle depends on things the driver might be not aware of - clock frequencies, DDR throughput, system load, etc. My take on this is that the decoder driver should advertise the highest resolution the decoder can handle due to hardware constraints. Performance related things depend on the integration details and should be managed elsewhere. For example Android and Chrome OS manage expected decoding performance in per-board configuration files. > > > > Signed-off-by: Hirokazu Honda <hiroh@chromium.org> > > --- > > drivers/staging/media/hantro/hantro_drv.c | 10 ++++++++++ > > 1 file changed, 10 insertions(+) > > > > diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c > > index 6d9d41170832..9387619235d8 100644 > > --- a/drivers/staging/media/hantro/hantro_drv.c > > +++ b/drivers/staging/media/hantro/hantro_drv.c > > @@ -355,6 +355,16 @@ static const struct hantro_ctrl controls[] = { > > .def = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > > .max = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > > }, > > + }, { > > + .codec = HANTRO_H264_DECODER, > > + .cfg = { > > + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE, > > + .min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, > > + .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, > > + .menu_skip_mask = > > + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED), > > + .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN, > > + } > > }, { > > }, > > }; > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] media: hantro: Support H264 profile control 2019-11-22 16:00 ` Tomasz Figa @ 2019-11-22 16:52 ` Nicolas Dufresne 2019-11-29 0:16 ` Tomasz Figa 0 siblings, 1 reply; 11+ messages in thread From: Nicolas Dufresne @ 2019-11-22 16:52 UTC (permalink / raw) To: Tomasz Figa Cc: Hirokazu Honda, Ezequiel Garcia, Mauro Carvalho Chehab, Greg KH, Linux Media Mailing List, devel, Linux Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 3488 bytes --] Le samedi 23 novembre 2019 à 01:00 +0900, Tomasz Figa a écrit : > On Sat, Nov 23, 2019 at 12:09 AM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > > Le vendredi 22 novembre 2019 à 14:16 +0900, Hirokazu Honda a écrit : > > > The Hantro G1 decoder supports H.264 profiles from Baseline to High, with > > > the exception of the Extended profile. > > > > > > Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE control, so that the > > > applications can query the driver for the list of supported profiles. > > > > Thanks for this patch. Do you think we could also add the LEVEL control > > so the profile/level enumeration becomes complete ? > > > > I'm thinking it would be nice if the v4l2 compliance test make sure > > that codecs do implement these controls (both stateful and stateless), > > it's essential for stack with software fallback, or multiple capable > > codec hardware but with different capabilities. > > > > Level is a difficult story, because it also specifies the number of > macroblocks per second, but for decoders like this the number of > macroblocks per second it can handle depends on things the driver > might be not aware of - clock frequencies, DDR throughput, system > load, etc. > > My take on this is that the decoder driver should advertise the > highest resolution the decoder can handle due to hardware constraints. > Performance related things depend on the integration details and > should be managed elsewhere. For example Android and Chrome OS manage > expected decoding performance in per-board configuration files. When you read datasheet, the HW is always rated to maximum level (and it's a range) with the assumption of a single stream. It seems much easier to expose this as-is, statically then to start doing some math with data that isn't fully exposed to the user. This is about filtering of multiple CODEC instances, it does not need to be rocket science, specially that the amount of missing data is important (e.g. usage of tiles, compression, IPP all have an impact on the final performance). All we want to know in userspace is if this HW is even possibly capable of LEVEL X, and if not, we'll look for another one. > > > > Signed-off-by: Hirokazu Honda <hiroh@chromium.org> > > > --- > > > drivers/staging/media/hantro/hantro_drv.c | 10 ++++++++++ > > > 1 file changed, 10 insertions(+) > > > > > > diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c > > > index 6d9d41170832..9387619235d8 100644 > > > --- a/drivers/staging/media/hantro/hantro_drv.c > > > +++ b/drivers/staging/media/hantro/hantro_drv.c > > > @@ -355,6 +355,16 @@ static const struct hantro_ctrl controls[] = { > > > .def = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > > > .max = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > > > }, > > > + }, { > > > + .codec = HANTRO_H264_DECODER, > > > + .cfg = { > > > + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE, > > > + .min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, > > > + .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, > > > + .menu_skip_mask = > > > + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED), > > > + .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN, > > > + } > > > }, { > > > }, > > > }; [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 195 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] media: hantro: Support H264 profile control 2019-11-22 16:52 ` Nicolas Dufresne @ 2019-11-29 0:16 ` Tomasz Figa 2020-01-10 12:31 ` Hans Verkuil 0 siblings, 1 reply; 11+ messages in thread From: Tomasz Figa @ 2019-11-29 0:16 UTC (permalink / raw) To: Nicolas Dufresne Cc: Hirokazu Honda, Ezequiel Garcia, Mauro Carvalho Chehab, Greg KH, Linux Media Mailing List, devel, Linux Kernel Mailing List On Sat, Nov 23, 2019 at 1:52 AM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > > Le samedi 23 novembre 2019 à 01:00 +0900, Tomasz Figa a écrit : > > On Sat, Nov 23, 2019 at 12:09 AM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > > > Le vendredi 22 novembre 2019 à 14:16 +0900, Hirokazu Honda a écrit : > > > > The Hantro G1 decoder supports H.264 profiles from Baseline to High, with > > > > the exception of the Extended profile. > > > > > > > > Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE control, so that the > > > > applications can query the driver for the list of supported profiles. > > > > > > Thanks for this patch. Do you think we could also add the LEVEL control > > > so the profile/level enumeration becomes complete ? > > > > > > I'm thinking it would be nice if the v4l2 compliance test make sure > > > that codecs do implement these controls (both stateful and stateless), > > > it's essential for stack with software fallback, or multiple capable > > > codec hardware but with different capabilities. > > > > > > > Level is a difficult story, because it also specifies the number of > > macroblocks per second, but for decoders like this the number of > > macroblocks per second it can handle depends on things the driver > > might be not aware of - clock frequencies, DDR throughput, system > > load, etc. > > > > My take on this is that the decoder driver should advertise the > > highest resolution the decoder can handle due to hardware constraints. > > Performance related things depend on the integration details and > > should be managed elsewhere. For example Android and Chrome OS manage > > expected decoding performance in per-board configuration files. > > When you read datasheet, the HW is always rated to maximum level (and > it's a range) with the assumption of a single stream. It seems much > easier to expose this as-is, statically then to start doing some math > with data that isn't fully exposed to the user. This is about filtering > of multiple CODEC instances, it does not need to be rocket science, > specially that the amount of missing data is important (e.g. usage of > tiles, compression, IPP all have an impact on the final performance). > All we want to know in userspace is if this HW is even possibly capable > of LEVEL X, and if not, we'll look for another one. > Agreed, one could potentially define it this way, but would it be really useful for the userspace and the users? I guess it could enable slightly faster fallback to software decoding in the extreme case of the hardware not supporting the level at all, but I suspect that the majority of cases would be the hardware just being unusably slow. Also, as I mentioned before, we already return the range of supported resolutions, which in practice should map to the part of the level that may depend on hardware capabilities rather than performance, so exposing levels as well would add redundancy to the information exposed. > > > > > > Signed-off-by: Hirokazu Honda <hiroh@chromium.org> > > > > --- > > > > drivers/staging/media/hantro/hantro_drv.c | 10 ++++++++++ > > > > 1 file changed, 10 insertions(+) > > > > > > > > diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c > > > > index 6d9d41170832..9387619235d8 100644 > > > > --- a/drivers/staging/media/hantro/hantro_drv.c > > > > +++ b/drivers/staging/media/hantro/hantro_drv.c > > > > @@ -355,6 +355,16 @@ static const struct hantro_ctrl controls[] = { > > > > .def = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > > > > .max = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > > > > }, > > > > + }, { > > > > + .codec = HANTRO_H264_DECODER, > > > > + .cfg = { > > > > + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE, > > > > + .min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, > > > > + .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, > > > > + .menu_skip_mask = > > > > + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED), > > > > + .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN, > > > > + } > > > > }, { > > > > }, > > > > }; ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] media: hantro: Support H264 profile control 2019-11-29 0:16 ` Tomasz Figa @ 2020-01-10 12:31 ` Hans Verkuil 2020-01-11 4:59 ` Ezequiel Garcia 2020-01-18 13:31 ` Nicolas Dufresne 0 siblings, 2 replies; 11+ messages in thread From: Hans Verkuil @ 2020-01-10 12:31 UTC (permalink / raw) To: Tomasz Figa, Nicolas Dufresne Cc: Hirokazu Honda, Ezequiel Garcia, Mauro Carvalho Chehab, Greg KH, Linux Media Mailing List, devel, Linux Kernel Mailing List On 11/29/19 1:16 AM, Tomasz Figa wrote: > On Sat, Nov 23, 2019 at 1:52 AM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: >> >> Le samedi 23 novembre 2019 à 01:00 +0900, Tomasz Figa a écrit : >>> On Sat, Nov 23, 2019 at 12:09 AM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: >>>> Le vendredi 22 novembre 2019 à 14:16 +0900, Hirokazu Honda a écrit : >>>>> The Hantro G1 decoder supports H.264 profiles from Baseline to High, with >>>>> the exception of the Extended profile. >>>>> >>>>> Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE control, so that the >>>>> applications can query the driver for the list of supported profiles. >>>> >>>> Thanks for this patch. Do you think we could also add the LEVEL control >>>> so the profile/level enumeration becomes complete ? >>>> >>>> I'm thinking it would be nice if the v4l2 compliance test make sure >>>> that codecs do implement these controls (both stateful and stateless), >>>> it's essential for stack with software fallback, or multiple capable >>>> codec hardware but with different capabilities. >>>> >>> >>> Level is a difficult story, because it also specifies the number of >>> macroblocks per second, but for decoders like this the number of >>> macroblocks per second it can handle depends on things the driver >>> might be not aware of - clock frequencies, DDR throughput, system >>> load, etc. >>> >>> My take on this is that the decoder driver should advertise the >>> highest resolution the decoder can handle due to hardware constraints. >>> Performance related things depend on the integration details and >>> should be managed elsewhere. For example Android and Chrome OS manage >>> expected decoding performance in per-board configuration files. >> >> When you read datasheet, the HW is always rated to maximum level (and >> it's a range) with the assumption of a single stream. It seems much >> easier to expose this as-is, statically then to start doing some math >> with data that isn't fully exposed to the user. This is about filtering >> of multiple CODEC instances, it does not need to be rocket science, >> specially that the amount of missing data is important (e.g. usage of >> tiles, compression, IPP all have an impact on the final performance). >> All we want to know in userspace is if this HW is even possibly capable >> of LEVEL X, and if not, we'll look for another one. >> > > Agreed, one could potentially define it this way, but would it be > really useful for the userspace and the users? I guess it could enable > slightly faster fallback to software decoding in the extreme case of > the hardware not supporting the level at all, but I suspect that the > majority of cases would be the hardware just being unusably slow. > > Also, as I mentioned before, we already return the range of supported > resolutions, which in practice should map to the part of the level > that may depend on hardware capabilities rather than performance, so > exposing levels as well would add redundancy to the information > exposed. There is a lot of discussion here, but it all revolves around a potential LEVEL control. So I gather everyone is OK with merging this patch? If not, let me know asap. Regards, Hans > >>> >>>>> Signed-off-by: Hirokazu Honda <hiroh@chromium.org> >>>>> --- >>>>> drivers/staging/media/hantro/hantro_drv.c | 10 ++++++++++ >>>>> 1 file changed, 10 insertions(+) >>>>> >>>>> diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c >>>>> index 6d9d41170832..9387619235d8 100644 >>>>> --- a/drivers/staging/media/hantro/hantro_drv.c >>>>> +++ b/drivers/staging/media/hantro/hantro_drv.c >>>>> @@ -355,6 +355,16 @@ static const struct hantro_ctrl controls[] = { >>>>> .def = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, >>>>> .max = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, >>>>> }, >>>>> + }, { >>>>> + .codec = HANTRO_H264_DECODER, >>>>> + .cfg = { >>>>> + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE, >>>>> + .min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, >>>>> + .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, >>>>> + .menu_skip_mask = >>>>> + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED), >>>>> + .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN, >>>>> + } >>>>> }, { >>>>> }, >>>>> }; ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] media: hantro: Support H264 profile control 2020-01-10 12:31 ` Hans Verkuil @ 2020-01-11 4:59 ` Ezequiel Garcia 2020-01-18 13:31 ` Nicolas Dufresne 1 sibling, 0 replies; 11+ messages in thread From: Ezequiel Garcia @ 2020-01-11 4:59 UTC (permalink / raw) To: Hans Verkuil, Tomasz Figa, Nicolas Dufresne, Hirokazu Honda Cc: Mauro Carvalho Chehab, Greg KH, Linux Media Mailing List, devel, Linux Kernel Mailing List Hello Hirokazu, Hans, On Fri, 2020-01-10 at 13:31 +0100, Hans Verkuil wrote: > On 11/29/19 1:16 AM, Tomasz Figa wrote: > > On Sat, Nov 23, 2019 at 1:52 AM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > > > Le samedi 23 novembre 2019 à 01:00 +0900, Tomasz Figa a écrit : > > > > On Sat, Nov 23, 2019 at 12:09 AM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > > > > > Le vendredi 22 novembre 2019 à 14:16 +0900, Hirokazu Honda a écrit : > > > > > > The Hantro G1 decoder supports H.264 profiles from Baseline to High, with > > > > > > the exception of the Extended profile. > > > > > > > > > > > > Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE control, so that the > > > > > > applications can query the driver for the list of supported profiles. > > > > > > > > > > Thanks for this patch. Do you think we could also add the LEVEL control > > > > > so the profile/level enumeration becomes complete ? > > > > > > > > > > I'm thinking it would be nice if the v4l2 compliance test make sure > > > > > that codecs do implement these controls (both stateful and stateless), > > > > > it's essential for stack with software fallback, or multiple capable > > > > > codec hardware but with different capabilities. > > > > > > > > > > > > > Level is a difficult story, because it also specifies the number of > > > > macroblocks per second, but for decoders like this the number of > > > > macroblocks per second it can handle depends on things the driver > > > > might be not aware of - clock frequencies, DDR throughput, system > > > > load, etc. > > > > > > > > My take on this is that the decoder driver should advertise the > > > > highest resolution the decoder can handle due to hardware constraints. > > > > Performance related things depend on the integration details and > > > > should be managed elsewhere. For example Android and Chrome OS manage > > > > expected decoding performance in per-board configuration files. > > > > > > When you read datasheet, the HW is always rated to maximum level (and > > > it's a range) with the assumption of a single stream. It seems much > > > easier to expose this as-is, statically then to start doing some math > > > with data that isn't fully exposed to the user. This is about filtering > > > of multiple CODEC instances, it does not need to be rocket science, > > > specially that the amount of missing data is important (e.g. usage of > > > tiles, compression, IPP all have an impact on the final performance). > > > All we want to know in userspace is if this HW is even possibly capable > > > of LEVEL X, and if not, we'll look for another one. > > > > > > > Agreed, one could potentially define it this way, but would it be > > really useful for the userspace and the users? I guess it could enable > > slightly faster fallback to software decoding in the extreme case of > > the hardware not supporting the level at all, but I suspect that the > > majority of cases would be the hardware just being unusably slow. > > > > Also, as I mentioned before, we already return the range of supported > > resolutions, which in practice should map to the part of the level > > that may depend on hardware capabilities rather than performance, so > > exposing levels as well would add redundancy to the information > > exposed. > > There is a lot of discussion here, but it all revolves around a potential > LEVEL control. > > So I gather everyone is OK with merging this patch? > I'm fine with this. [..] > > > > > > diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c > > > > > > index 6d9d41170832..9387619235d8 100644 > > > > > > --- a/drivers/staging/media/hantro/hantro_drv.c > > > > > > +++ b/drivers/staging/media/hantro/hantro_drv.c > > > > > > @@ -355,6 +355,16 @@ static const struct hantro_ctrl controls[] = { > > > > > > .def = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > > > > > > .max = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > > > > > > }, > > > > > > + }, { > > > > > > + .codec = HANTRO_H264_DECODER, > > > > > > + .cfg = { > > > > > > + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE, > > > > > > + .min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, I'd like to see the .def here ^^^ for consistency with the other controls. But I know this is my OCD speaking, so it's fine as-is as well. Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> > > > > > > + .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, > > > > > > + .menu_skip_mask = > > > > > > + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED), > > > > > > + .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN, Thanks, Eze ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] media: hantro: Support H264 profile control 2020-01-10 12:31 ` Hans Verkuil 2020-01-11 4:59 ` Ezequiel Garcia @ 2020-01-18 13:31 ` Nicolas Dufresne 2020-02-03 11:13 ` Tomasz Figa 1 sibling, 1 reply; 11+ messages in thread From: Nicolas Dufresne @ 2020-01-18 13:31 UTC (permalink / raw) To: Hans Verkuil, Tomasz Figa Cc: Hirokazu Honda, Ezequiel Garcia, Mauro Carvalho Chehab, Greg KH, Linux Media Mailing List, devel, Linux Kernel Mailing List Le vendredi 10 janvier 2020 à 13:31 +0100, Hans Verkuil a écrit : > On 11/29/19 1:16 AM, Tomasz Figa wrote: > > On Sat, Nov 23, 2019 at 1:52 AM Nicolas Dufresne <nicolas@ndufresne.ca> > > wrote: > > > Le samedi 23 novembre 2019 à 01:00 +0900, Tomasz Figa a écrit : > > > > On Sat, Nov 23, 2019 at 12:09 AM Nicolas Dufresne <nicolas@ndufresne.ca> > > > > wrote: > > > > > Le vendredi 22 novembre 2019 à 14:16 +0900, Hirokazu Honda a écrit : > > > > > > The Hantro G1 decoder supports H.264 profiles from Baseline to High, > > > > > > with > > > > > > the exception of the Extended profile. > > > > > > > > > > > > Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE control, so that the > > > > > > applications can query the driver for the list of supported > > > > > > profiles. > > > > > > > > > > Thanks for this patch. Do you think we could also add the LEVEL > > > > > control > > > > > so the profile/level enumeration becomes complete ? > > > > > > > > > > I'm thinking it would be nice if the v4l2 compliance test make sure > > > > > that codecs do implement these controls (both stateful and stateless), > > > > > it's essential for stack with software fallback, or multiple capable > > > > > codec hardware but with different capabilities. > > > > > > > > > > > > > Level is a difficult story, because it also specifies the number of > > > > macroblocks per second, but for decoders like this the number of > > > > macroblocks per second it can handle depends on things the driver > > > > might be not aware of - clock frequencies, DDR throughput, system > > > > load, etc. > > > > > > > > My take on this is that the decoder driver should advertise the > > > > highest resolution the decoder can handle due to hardware constraints. > > > > Performance related things depend on the integration details and > > > > should be managed elsewhere. For example Android and Chrome OS manage > > > > expected decoding performance in per-board configuration files. > > > > > > When you read datasheet, the HW is always rated to maximum level (and > > > it's a range) with the assumption of a single stream. It seems much > > > easier to expose this as-is, statically then to start doing some math > > > with data that isn't fully exposed to the user. This is about filtering > > > of multiple CODEC instances, it does not need to be rocket science, > > > specially that the amount of missing data is important (e.g. usage of > > > tiles, compression, IPP all have an impact on the final performance). > > > All we want to know in userspace is if this HW is even possibly capable > > > of LEVEL X, and if not, we'll look for another one. > > > > > > > Agreed, one could potentially define it this way, but would it be > > really useful for the userspace and the users? I guess it could enable > > slightly faster fallback to software decoding in the extreme case of > > the hardware not supporting the level at all, but I suspect that the > > majority of cases would be the hardware just being unusably slow. > > > > Also, as I mentioned before, we already return the range of supported > > resolutions, which in practice should map to the part of the level > > that may depend on hardware capabilities rather than performance, so > > exposing levels as well would add redundancy to the information > > exposed. > > There is a lot of discussion here, but it all revolves around a potential > LEVEL control. > > So I gather everyone is OK with merging this patch? I'm ok with this. For me, the level reflects the real time performance capability as define in the spec, while the width/height constraints usually represent an addressing capabicity, which may or may not operate real-time. > > If not, let me know asap. > > Regards, > > Hans > > > > > > > Signed-off-by: Hirokazu Honda <hiroh@chromium.org> > > > > > > --- > > > > > > drivers/staging/media/hantro/hantro_drv.c | 10 ++++++++++ > > > > > > 1 file changed, 10 insertions(+) > > > > > > > > > > > > diff --git a/drivers/staging/media/hantro/hantro_drv.c > > > > > > b/drivers/staging/media/hantro/hantro_drv.c > > > > > > index 6d9d41170832..9387619235d8 100644 > > > > > > --- a/drivers/staging/media/hantro/hantro_drv.c > > > > > > +++ b/drivers/staging/media/hantro/hantro_drv.c > > > > > > @@ -355,6 +355,16 @@ static const struct hantro_ctrl controls[] = { > > > > > > .def = > > > > > > V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > > > > > > .max = > > > > > > V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > > > > > > }, > > > > > > + }, { > > > > > > + .codec = HANTRO_H264_DECODER, > > > > > > + .cfg = { > > > > > > + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE, > > > > > > + .min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, > > > > > > + .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, > > > > > > + .menu_skip_mask = > > > > > > + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED), > > > > > > + .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN, > > > > > > + } > > > > > > }, { > > > > > > }, > > > > > > }; ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] media: hantro: Support H264 profile control 2020-01-18 13:31 ` Nicolas Dufresne @ 2020-02-03 11:13 ` Tomasz Figa 2020-02-03 11:59 ` Hans Verkuil 0 siblings, 1 reply; 11+ messages in thread From: Tomasz Figa @ 2020-02-03 11:13 UTC (permalink / raw) To: Nicolas Dufresne Cc: Hans Verkuil, Hirokazu Honda, Ezequiel Garcia, Mauro Carvalho Chehab, Greg KH, Linux Media Mailing List, devel, Linux Kernel Mailing List On Sat, Jan 18, 2020 at 10:31 PM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > > Le vendredi 10 janvier 2020 à 13:31 +0100, Hans Verkuil a écrit : > > On 11/29/19 1:16 AM, Tomasz Figa wrote: > > > On Sat, Nov 23, 2019 at 1:52 AM Nicolas Dufresne <nicolas@ndufresne.ca> > > > wrote: > > > > Le samedi 23 novembre 2019 à 01:00 +0900, Tomasz Figa a écrit : > > > > > On Sat, Nov 23, 2019 at 12:09 AM Nicolas Dufresne <nicolas@ndufresne.ca> > > > > > wrote: > > > > > > Le vendredi 22 novembre 2019 à 14:16 +0900, Hirokazu Honda a écrit : > > > > > > > The Hantro G1 decoder supports H.264 profiles from Baseline to High, > > > > > > > with > > > > > > > the exception of the Extended profile. > > > > > > > > > > > > > > Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE control, so that the > > > > > > > applications can query the driver for the list of supported > > > > > > > profiles. > > > > > > > > > > > > Thanks for this patch. Do you think we could also add the LEVEL > > > > > > control > > > > > > so the profile/level enumeration becomes complete ? > > > > > > > > > > > > I'm thinking it would be nice if the v4l2 compliance test make sure > > > > > > that codecs do implement these controls (both stateful and stateless), > > > > > > it's essential for stack with software fallback, or multiple capable > > > > > > codec hardware but with different capabilities. > > > > > > > > > > > > > > > > Level is a difficult story, because it also specifies the number of > > > > > macroblocks per second, but for decoders like this the number of > > > > > macroblocks per second it can handle depends on things the driver > > > > > might be not aware of - clock frequencies, DDR throughput, system > > > > > load, etc. > > > > > > > > > > My take on this is that the decoder driver should advertise the > > > > > highest resolution the decoder can handle due to hardware constraints. > > > > > Performance related things depend on the integration details and > > > > > should be managed elsewhere. For example Android and Chrome OS manage > > > > > expected decoding performance in per-board configuration files. > > > > > > > > When you read datasheet, the HW is always rated to maximum level (and > > > > it's a range) with the assumption of a single stream. It seems much > > > > easier to expose this as-is, statically then to start doing some math > > > > with data that isn't fully exposed to the user. This is about filtering > > > > of multiple CODEC instances, it does not need to be rocket science, > > > > specially that the amount of missing data is important (e.g. usage of > > > > tiles, compression, IPP all have an impact on the final performance). > > > > All we want to know in userspace is if this HW is even possibly capable > > > > of LEVEL X, and if not, we'll look for another one. > > > > > > > > > > Agreed, one could potentially define it this way, but would it be > > > really useful for the userspace and the users? I guess it could enable > > > slightly faster fallback to software decoding in the extreme case of > > > the hardware not supporting the level at all, but I suspect that the > > > majority of cases would be the hardware just being unusably slow. > > > > > > Also, as I mentioned before, we already return the range of supported > > > resolutions, which in practice should map to the part of the level > > > that may depend on hardware capabilities rather than performance, so > > > exposing levels as well would add redundancy to the information > > > exposed. > > > > There is a lot of discussion here, but it all revolves around a potential > > LEVEL control. > > > > So I gather everyone is OK with merging this patch? > > I'm ok with this. For me, the level reflects the real time performance > capability as define in the spec, while the width/height constraints usually > represent an addressing capabicity, which may or may not operate real-time. > I'd like to see the level control documentation improved before we start adding it to the drivers. I'll be okay with that then as long as the values are exposed in a consistent and well defined way. :) As for this patch, Hans, are you going to apply it? Best regards, Tomasz > > > > If not, let me know asap. > > > > Regards, > > > > Hans > > > > > > > > > Signed-off-by: Hirokazu Honda <hiroh@chromium.org> > > > > > > > --- > > > > > > > drivers/staging/media/hantro/hantro_drv.c | 10 ++++++++++ > > > > > > > 1 file changed, 10 insertions(+) > > > > > > > > > > > > > > diff --git a/drivers/staging/media/hantro/hantro_drv.c > > > > > > > b/drivers/staging/media/hantro/hantro_drv.c > > > > > > > index 6d9d41170832..9387619235d8 100644 > > > > > > > --- a/drivers/staging/media/hantro/hantro_drv.c > > > > > > > +++ b/drivers/staging/media/hantro/hantro_drv.c > > > > > > > @@ -355,6 +355,16 @@ static const struct hantro_ctrl controls[] = { > > > > > > > .def = > > > > > > > V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > > > > > > > .max = > > > > > > > V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > > > > > > > }, > > > > > > > + }, { > > > > > > > + .codec = HANTRO_H264_DECODER, > > > > > > > + .cfg = { > > > > > > > + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE, > > > > > > > + .min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, > > > > > > > + .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, > > > > > > > + .menu_skip_mask = > > > > > > > + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED), > > > > > > > + .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN, > > > > > > > + } > > > > > > > }, { > > > > > > > }, > > > > > > > }; > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] media: hantro: Support H264 profile control 2020-02-03 11:13 ` Tomasz Figa @ 2020-02-03 11:59 ` Hans Verkuil 2020-02-03 13:48 ` Tomasz Figa 0 siblings, 1 reply; 11+ messages in thread From: Hans Verkuil @ 2020-02-03 11:59 UTC (permalink / raw) To: Tomasz Figa, Nicolas Dufresne Cc: Hirokazu Honda, Ezequiel Garcia, Mauro Carvalho Chehab, Greg KH, Linux Media Mailing List, devel, Linux Kernel Mailing List On 2/3/20 12:13 PM, Tomasz Figa wrote: > On Sat, Jan 18, 2020 at 10:31 PM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: >> >> Le vendredi 10 janvier 2020 à 13:31 +0100, Hans Verkuil a écrit : >>> On 11/29/19 1:16 AM, Tomasz Figa wrote: >>>> On Sat, Nov 23, 2019 at 1:52 AM Nicolas Dufresne <nicolas@ndufresne.ca> >>>> wrote: >>>>> Le samedi 23 novembre 2019 à 01:00 +0900, Tomasz Figa a écrit : >>>>>> On Sat, Nov 23, 2019 at 12:09 AM Nicolas Dufresne <nicolas@ndufresne.ca> >>>>>> wrote: >>>>>>> Le vendredi 22 novembre 2019 à 14:16 +0900, Hirokazu Honda a écrit : >>>>>>>> The Hantro G1 decoder supports H.264 profiles from Baseline to High, >>>>>>>> with >>>>>>>> the exception of the Extended profile. >>>>>>>> >>>>>>>> Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE control, so that the >>>>>>>> applications can query the driver for the list of supported >>>>>>>> profiles. >>>>>>> >>>>>>> Thanks for this patch. Do you think we could also add the LEVEL >>>>>>> control >>>>>>> so the profile/level enumeration becomes complete ? >>>>>>> >>>>>>> I'm thinking it would be nice if the v4l2 compliance test make sure >>>>>>> that codecs do implement these controls (both stateful and stateless), >>>>>>> it's essential for stack with software fallback, or multiple capable >>>>>>> codec hardware but with different capabilities. >>>>>>> >>>>>> >>>>>> Level is a difficult story, because it also specifies the number of >>>>>> macroblocks per second, but for decoders like this the number of >>>>>> macroblocks per second it can handle depends on things the driver >>>>>> might be not aware of - clock frequencies, DDR throughput, system >>>>>> load, etc. >>>>>> >>>>>> My take on this is that the decoder driver should advertise the >>>>>> highest resolution the decoder can handle due to hardware constraints. >>>>>> Performance related things depend on the integration details and >>>>>> should be managed elsewhere. For example Android and Chrome OS manage >>>>>> expected decoding performance in per-board configuration files. >>>>> >>>>> When you read datasheet, the HW is always rated to maximum level (and >>>>> it's a range) with the assumption of a single stream. It seems much >>>>> easier to expose this as-is, statically then to start doing some math >>>>> with data that isn't fully exposed to the user. This is about filtering >>>>> of multiple CODEC instances, it does not need to be rocket science, >>>>> specially that the amount of missing data is important (e.g. usage of >>>>> tiles, compression, IPP all have an impact on the final performance). >>>>> All we want to know in userspace is if this HW is even possibly capable >>>>> of LEVEL X, and if not, we'll look for another one. >>>>> >>>> >>>> Agreed, one could potentially define it this way, but would it be >>>> really useful for the userspace and the users? I guess it could enable >>>> slightly faster fallback to software decoding in the extreme case of >>>> the hardware not supporting the level at all, but I suspect that the >>>> majority of cases would be the hardware just being unusably slow. >>>> >>>> Also, as I mentioned before, we already return the range of supported >>>> resolutions, which in practice should map to the part of the level >>>> that may depend on hardware capabilities rather than performance, so >>>> exposing levels as well would add redundancy to the information >>>> exposed. >>> >>> There is a lot of discussion here, but it all revolves around a potential >>> LEVEL control. >>> >>> So I gather everyone is OK with merging this patch? >> >> I'm ok with this. For me, the level reflects the real time performance >> capability as define in the spec, while the width/height constraints usually >> represent an addressing capabicity, which may or may not operate real-time. >> > > I'd like to see the level control documentation improved before we > start adding it to the drivers. I'll be okay with that then as long as > the values are exposed in a consistent and well defined way. :) > > As for this patch, Hans, are you going to apply it? It's in a PR for 5.7. I had hoped it would go in for v5.6, but it was too late for that. Regards, Hans > > Best regards, > Tomasz > >>> >>> If not, let me know asap. >>> >>> Regards, >>> >>> Hans >>> >>>>>>>> Signed-off-by: Hirokazu Honda <hiroh@chromium.org> >>>>>>>> --- >>>>>>>> drivers/staging/media/hantro/hantro_drv.c | 10 ++++++++++ >>>>>>>> 1 file changed, 10 insertions(+) >>>>>>>> >>>>>>>> diff --git a/drivers/staging/media/hantro/hantro_drv.c >>>>>>>> b/drivers/staging/media/hantro/hantro_drv.c >>>>>>>> index 6d9d41170832..9387619235d8 100644 >>>>>>>> --- a/drivers/staging/media/hantro/hantro_drv.c >>>>>>>> +++ b/drivers/staging/media/hantro/hantro_drv.c >>>>>>>> @@ -355,6 +355,16 @@ static const struct hantro_ctrl controls[] = { >>>>>>>> .def = >>>>>>>> V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, >>>>>>>> .max = >>>>>>>> V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, >>>>>>>> }, >>>>>>>> + }, { >>>>>>>> + .codec = HANTRO_H264_DECODER, >>>>>>>> + .cfg = { >>>>>>>> + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE, >>>>>>>> + .min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, >>>>>>>> + .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, >>>>>>>> + .menu_skip_mask = >>>>>>>> + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED), >>>>>>>> + .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN, >>>>>>>> + } >>>>>>>> }, { >>>>>>>> }, >>>>>>>> }; >> ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] media: hantro: Support H264 profile control 2020-02-03 11:59 ` Hans Verkuil @ 2020-02-03 13:48 ` Tomasz Figa 0 siblings, 0 replies; 11+ messages in thread From: Tomasz Figa @ 2020-02-03 13:48 UTC (permalink / raw) To: Hans Verkuil Cc: Nicolas Dufresne, Hirokazu Honda, Ezequiel Garcia, Mauro Carvalho Chehab, Greg KH, Linux Media Mailing List, devel, Linux Kernel Mailing List On Mon, Feb 3, 2020 at 9:00 PM Hans Verkuil <hverkuil@xs4all.nl> wrote: > > On 2/3/20 12:13 PM, Tomasz Figa wrote: > > On Sat, Jan 18, 2020 at 10:31 PM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > >> > >> Le vendredi 10 janvier 2020 à 13:31 +0100, Hans Verkuil a écrit : > >>> On 11/29/19 1:16 AM, Tomasz Figa wrote: > >>>> On Sat, Nov 23, 2019 at 1:52 AM Nicolas Dufresne <nicolas@ndufresne.ca> > >>>> wrote: > >>>>> Le samedi 23 novembre 2019 à 01:00 +0900, Tomasz Figa a écrit : > >>>>>> On Sat, Nov 23, 2019 at 12:09 AM Nicolas Dufresne <nicolas@ndufresne.ca> > >>>>>> wrote: > >>>>>>> Le vendredi 22 novembre 2019 à 14:16 +0900, Hirokazu Honda a écrit : > >>>>>>>> The Hantro G1 decoder supports H.264 profiles from Baseline to High, > >>>>>>>> with > >>>>>>>> the exception of the Extended profile. > >>>>>>>> > >>>>>>>> Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE control, so that the > >>>>>>>> applications can query the driver for the list of supported > >>>>>>>> profiles. > >>>>>>> > >>>>>>> Thanks for this patch. Do you think we could also add the LEVEL > >>>>>>> control > >>>>>>> so the profile/level enumeration becomes complete ? > >>>>>>> > >>>>>>> I'm thinking it would be nice if the v4l2 compliance test make sure > >>>>>>> that codecs do implement these controls (both stateful and stateless), > >>>>>>> it's essential for stack with software fallback, or multiple capable > >>>>>>> codec hardware but with different capabilities. > >>>>>>> > >>>>>> > >>>>>> Level is a difficult story, because it also specifies the number of > >>>>>> macroblocks per second, but for decoders like this the number of > >>>>>> macroblocks per second it can handle depends on things the driver > >>>>>> might be not aware of - clock frequencies, DDR throughput, system > >>>>>> load, etc. > >>>>>> > >>>>>> My take on this is that the decoder driver should advertise the > >>>>>> highest resolution the decoder can handle due to hardware constraints. > >>>>>> Performance related things depend on the integration details and > >>>>>> should be managed elsewhere. For example Android and Chrome OS manage > >>>>>> expected decoding performance in per-board configuration files. > >>>>> > >>>>> When you read datasheet, the HW is always rated to maximum level (and > >>>>> it's a range) with the assumption of a single stream. It seems much > >>>>> easier to expose this as-is, statically then to start doing some math > >>>>> with data that isn't fully exposed to the user. This is about filtering > >>>>> of multiple CODEC instances, it does not need to be rocket science, > >>>>> specially that the amount of missing data is important (e.g. usage of > >>>>> tiles, compression, IPP all have an impact on the final performance). > >>>>> All we want to know in userspace is if this HW is even possibly capable > >>>>> of LEVEL X, and if not, we'll look for another one. > >>>>> > >>>> > >>>> Agreed, one could potentially define it this way, but would it be > >>>> really useful for the userspace and the users? I guess it could enable > >>>> slightly faster fallback to software decoding in the extreme case of > >>>> the hardware not supporting the level at all, but I suspect that the > >>>> majority of cases would be the hardware just being unusably slow. > >>>> > >>>> Also, as I mentioned before, we already return the range of supported > >>>> resolutions, which in practice should map to the part of the level > >>>> that may depend on hardware capabilities rather than performance, so > >>>> exposing levels as well would add redundancy to the information > >>>> exposed. > >>> > >>> There is a lot of discussion here, but it all revolves around a potential > >>> LEVEL control. > >>> > >>> So I gather everyone is OK with merging this patch? > >> > >> I'm ok with this. For me, the level reflects the real time performance > >> capability as define in the spec, while the width/height constraints usually > >> represent an addressing capabicity, which may or may not operate real-time. > >> > > > > I'd like to see the level control documentation improved before we > > start adding it to the drivers. I'll be okay with that then as long as > > the values are exposed in a consistent and well defined way. :) > > > > As for this patch, Hans, are you going to apply it? > > It's in a PR for 5.7. I had hoped it would go in for v5.6, but it was > too late for that. Okay, thanks! > > Regards, > > Hans > > > > > Best regards, > > Tomasz > > > >>> > >>> If not, let me know asap. > >>> > >>> Regards, > >>> > >>> Hans > >>> > >>>>>>>> Signed-off-by: Hirokazu Honda <hiroh@chromium.org> > >>>>>>>> --- > >>>>>>>> drivers/staging/media/hantro/hantro_drv.c | 10 ++++++++++ > >>>>>>>> 1 file changed, 10 insertions(+) > >>>>>>>> > >>>>>>>> diff --git a/drivers/staging/media/hantro/hantro_drv.c > >>>>>>>> b/drivers/staging/media/hantro/hantro_drv.c > >>>>>>>> index 6d9d41170832..9387619235d8 100644 > >>>>>>>> --- a/drivers/staging/media/hantro/hantro_drv.c > >>>>>>>> +++ b/drivers/staging/media/hantro/hantro_drv.c > >>>>>>>> @@ -355,6 +355,16 @@ static const struct hantro_ctrl controls[] = { > >>>>>>>> .def = > >>>>>>>> V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > >>>>>>>> .max = > >>>>>>>> V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, > >>>>>>>> }, > >>>>>>>> + }, { > >>>>>>>> + .codec = HANTRO_H264_DECODER, > >>>>>>>> + .cfg = { > >>>>>>>> + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE, > >>>>>>>> + .min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, > >>>>>>>> + .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, > >>>>>>>> + .menu_skip_mask = > >>>>>>>> + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED), > >>>>>>>> + .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN, > >>>>>>>> + } > >>>>>>>> }, { > >>>>>>>> }, > >>>>>>>> }; > >> > ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2020-02-03 13:49 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-11-22 5:16 [PATCH] media: hantro: Support H264 profile control Hirokazu Honda 2019-11-22 15:09 ` Nicolas Dufresne 2019-11-22 16:00 ` Tomasz Figa 2019-11-22 16:52 ` Nicolas Dufresne 2019-11-29 0:16 ` Tomasz Figa 2020-01-10 12:31 ` Hans Verkuil 2020-01-11 4:59 ` Ezequiel Garcia 2020-01-18 13:31 ` Nicolas Dufresne 2020-02-03 11:13 ` Tomasz Figa 2020-02-03 11:59 ` Hans Verkuil 2020-02-03 13:48 ` Tomasz Figa
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).