From: Hans Verkuil <hverkuil@xs4all.nl>
To: Linux Media Mailing List <linux-media@vger.kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Prabhakar Lad <prabhakar.csengg@gmail.com>,
Akinobu Mita <akinobu.mita@gmail.com>,
Eugen Hristev <eugen.hristev@microchip.com>,
Rui Miguel Silva <rui.silva@linaro.org>
Subject: [PATCH] media/i2c: don't return ENOTTY if SUBDEV_API is not set
Date: Wed, 17 Jul 2019 11:24:13 +0200 [thread overview]
Message-ID: <854769c0-c933-0919-2798-e8286e1694fb@xs4all.nl> (raw)
If CONFIG_VIDEO_V4L2_SUBDEV_API is not set, then it is still possible
to call set_fmt for V4L2_SUBDEV_FORMAT_TRY, the result is just not
stored. So return 0 instead of -ENOTTY.
Calling get_fmt with V4L2_SUBDEV_FORMAT_TRY should return -EINVAL
instead of -ENOTTY, after all the get_fmt functionality is still
present, just not supported for TRY.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
---
This was fixed for the ov7670 (https://patchwork.linuxtv.org/patch/57584/) when
working on the via-camera driver, but the same pattern is found in other drivers,
and those are fixed in this patch.
---
drivers/media/i2c/mt9m111.c | 2 +-
drivers/media/i2c/ov2640.c | 2 +-
drivers/media/i2c/ov2659.c | 4 +---
drivers/media/i2c/ov2680.c | 5 +----
drivers/media/i2c/ov5695.c | 5 +----
drivers/media/i2c/ov7740.c | 8 ++------
6 files changed, 7 insertions(+), 19 deletions(-)
diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
index d10fe3712036..d4864d155f0b 100644
--- a/drivers/media/i2c/mt9m111.c
+++ b/drivers/media/i2c/mt9m111.c
@@ -536,7 +536,7 @@ static int mt9m111_get_fmt(struct v4l2_subdev *sd,
format->format = *mf;
return 0;
#else
- return -ENOTTY;
+ return -EINVAL;
#endif
}
diff --git a/drivers/media/i2c/ov2640.c b/drivers/media/i2c/ov2640.c
index 30e7e6b2b293..39474b287bb2 100644
--- a/drivers/media/i2c/ov2640.c
+++ b/drivers/media/i2c/ov2640.c
@@ -932,7 +932,7 @@ static int ov2640_get_fmt(struct v4l2_subdev *sd,
format->format = *mf;
return 0;
#else
- return -ENOTTY;
+ return -EINVAL;
#endif
}
diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
index 5ed2413eac8a..a71277e361ff 100644
--- a/drivers/media/i2c/ov2659.c
+++ b/drivers/media/i2c/ov2659.c
@@ -1055,7 +1055,7 @@ static int ov2659_get_fmt(struct v4l2_subdev *sd,
mutex_unlock(&ov2659->lock);
return 0;
#else
- return -ENOTTY;
+ return -EINVAL;
#endif
}
@@ -1131,8 +1131,6 @@ static int ov2659_set_fmt(struct v4l2_subdev *sd,
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
*mf = fmt->format;
-#else
- ret = -ENOTTY;
#endif
} else {
s64 val;
diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c
index b10bcfabaeeb..164f983c1814 100644
--- a/drivers/media/i2c/ov2680.c
+++ b/drivers/media/i2c/ov2680.c
@@ -675,7 +675,7 @@ static int ov2680_get_fmt(struct v4l2_subdev *sd,
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
fmt = v4l2_subdev_get_try_format(&sensor->sd, cfg, format->pad);
#else
- ret = -ENOTTY;
+ ret = -EINVAL;
#endif
} else {
fmt = &sensor->fmt;
@@ -723,10 +723,7 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
try_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
format->format = *try_fmt;
-#else
- ret = -ENOTTY;
#endif
-
goto unlock;
}
diff --git a/drivers/media/i2c/ov5695.c b/drivers/media/i2c/ov5695.c
index e65a94353175..34b7046d9702 100644
--- a/drivers/media/i2c/ov5695.c
+++ b/drivers/media/i2c/ov5695.c
@@ -823,9 +823,6 @@ static int ov5695_set_fmt(struct v4l2_subdev *sd,
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
*v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format;
-#else
- mutex_unlock(&ov5695->mutex);
- return -ENOTTY;
#endif
} else {
ov5695->cur_mode = mode;
@@ -856,7 +853,7 @@ static int ov5695_get_fmt(struct v4l2_subdev *sd,
fmt->format = *v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
#else
mutex_unlock(&ov5695->mutex);
- return -ENOTTY;
+ return -EINVAL;
#endif
} else {
fmt->format.width = mode->width;
diff --git a/drivers/media/i2c/ov7740.c b/drivers/media/i2c/ov7740.c
index 70bb870b1d08..a2f8f19bca7c 100644
--- a/drivers/media/i2c/ov7740.c
+++ b/drivers/media/i2c/ov7740.c
@@ -827,13 +827,9 @@ static int ov7740_set_fmt(struct v4l2_subdev *sd,
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
*mbus_fmt = format->format;
-
+#endif
mutex_unlock(&ov7740->mutex);
return 0;
-#else
- ret = -ENOTTY;
- goto error;
-#endif
}
ret = ov7740_try_fmt_internal(sd, &format->format, &ovfmt, &fsize);
@@ -868,7 +864,7 @@ static int ov7740_get_fmt(struct v4l2_subdev *sd,
format->format = *mbus_fmt;
ret = 0;
#else
- ret = -ENOTTY;
+ ret = -EINVAL;
#endif
} else {
format->format = ov7740->format;
--
2.20.1
next reply other threads:[~2019-07-17 9:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-17 9:24 Hans Verkuil [this message]
2019-07-19 7:24 ` [PATCH] media/i2c: don't return ENOTTY if SUBDEV_API is not set Lad, Prabhakar
2019-07-19 7:52 ` Rui Miguel Silva
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=854769c0-c933-0919-2798-e8286e1694fb@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=akinobu.mita@gmail.com \
--cc=eugen.hristev@microchip.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=prabhakar.csengg@gmail.com \
--cc=rui.silva@linaro.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).